Kwant Controls B.V. | P.O.Box 23 8600 AA Sneek-Holland | www.kwantcontrols.com | [email protected] | Telephone +31 (0)515 413745 Propulsion control unit: BUK-C The BUK-C is the second largest console mounted propulsion control lever unit of the BUK-series, with a well-recognized, widely applied and much appreciated timeless classic appearance. The lever unit comes in a number of variations for user- and machinery interfaces. In the BUK-C extended version, a maximum of four HMI pushbuttons/buzzers/signal lamps/dimmers can be incorporated, as well as a wide range of electrical machinery interfaces. The BUK-C special version, is typically suitable for transverse thruster control. Possible output signals 2KOhm; 5KOhm; 4-20mA; Integrated CAN; Specifications The unit is made of a seawater proof aluminium alloy and executed with a single peripheral dial. The dial is protected by means of an unbreakable, transparent and UV proof protective cover. All decorative parts of the housing are black anodized. The lever unit can be equipped with single or twin levers and with spherical knobs or cross bars. The basic signal transmitter is a 2KOhm potentiometer that returns 10-90% of its supply voltage over the full lever travel of 120°. Options Integrated signal transmitters e.g. 4-20mA Micro switch contacts for e.g. clutch control Integrated emergency order telegraph system of the “pointer” type (single lever only) Mechanically lockable cross-levers
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Kwant Controls B.V. | P.O.Box 23 8600 AA Sneek-Holland | www.kwantcontrols.com | [email protected] | Telephone +31 (0)515 413745
Propulsion control unit: BUK-C
The BUK-C is the second largest console mounted propulsion control lever unit of the BUK-series, with a well-recognized, widely applied and much appreciated timeless classic appearance. The lever unit comes in a number of variations for user- and machinery interfaces. In the BUK-C extended version, a maximum of four HMI pushbuttons/buzzers/signal lamps/dimmers can be incorporated, as well as a wide range of electrical machinery interfaces. The BUK-C special version, is typically suitable for transverse thruster control.
Possible output signals 2KOhm;
5KOhm;
4-20mA;
Integrated CAN;
Specifications The unit is made of a seawater proof aluminium alloy and executed with a single peripheral dial. The
dial is protected by means of an unbreakable, transparent and UV proof protective cover. All
decorative parts of the housing are black anodized. The lever unit can be equipped with single or twin
levers and with spherical knobs or cross bars. The basic signal transmitter is a 2KOhm potentiometer
that returns 10-90% of its supply voltage over the full lever travel of 120°.
Options
Integrated signal transmitters e.g. 4-20mA
Micro switch contacts for e.g. clutch control
Integrated emergency order telegraph system of the “pointer” type (single lever only)
Mechanically lockable cross-levers
Kwant Controls B.V. | P.O.Box 23 8600 AA Sneek-Holland | www.kwantcontrols.com | [email protected] | Telephone +31 (0)515 413745
Stepper motors for:
o Automatic line-up (Electric Shaft);
o Electrical fine adjustment;
o Haptic feedback;
o Programmable detents (palpable stops);
Integrated pushbuttons, signal lamps, dimmers or buzzers
Other options on request
Copyright according to law
Creation date:
Scale:
Drawn by:
Rev.:Sheet:
Art.:
Sheet:
Dimensions in millimeters
A0136777
27-3-2019HS
A4 1:2,50
1 1
L.mod. date:
KWANT CONTROLS
s n e e k - h o l l a n d
Contr. Unit BUK-C
Engineer:HS
Title:
Drawing no:
Description:
PANEL
CUT OUT
10
110
15
MA
X.
14
4
96 20
10
0
6°
70
1
2
0
°
92
138
R≤3
TERMINAL BLOCK
Copyright according to law
Creation date:
Scale:
Drawn by:
Rev.:Sheet:
Art.:
Sheet:
Dimensions in millimeters
A0136837
16-4-2019HS
A4 1:2,50
1 1
L.mod. date:
KWANT CONTROLS
s n e e k - h o l l a n d
Contr. Unit BUK-C
Engineer:HS
Title:
Drawing no:
Description:
2-Pot.meter +3-µSwitch
PANEL
CUT-OUT
92
13
8
R≤3
96 20
14
41
5M
AX
.
10
11
0
6°
70
135
1
2
0
°
TERMINAL BLOCK
Copyright according to law
Creation date:
Scale:
Drawn by:
Rev.:Sheet:
Art.:
Sheet:
Dimensions in millimeters
4A0103428
21-2-1996EVD
A4 1:2,5A
11505055
1 1
21-2-1996L.mod. date:
KWANT CONTROLS
s n e e k - h o l l a n d
Contr. Unit BUK-C EXT.
Engineer:EVD
Title:
Drawing no:
Description:
1-Pot. meter/ Mech. locking device
PANEL
CUT-OUT
17
4
96 16
90
R≤3
DIMMER DIAL ILLUMINATION
MECHANICAL LOCKING DEVICE
15
MA
X.
10
105
6°
100
70
1
2
0
°
A
CONVERTED TO 3D
17-04-'19 HS
Copyright according to law
Creation date:
Scale:
Drawn by:
Rev.:Sheet:
Art.:
Sheet:
Dimensions in millimeters
A0136775
26-3-2019HS
A4 1:2,50
1 1
26-3-2019L.mod. date:
KWANT CONTROLS
s n e e k - h o l l a n d
Contr. Unit BUK-C EXT.
Engineer:HS
Title:
Drawing no:
Description:
Electric shaft/Stepper motor
PANEL
CUT-OUT
R≤3
90
17
4
96 16
18
0
17
2
6°
70
1
2
0
°
10
10
5
15
MA
X.
ILL. P/B "TAKE OVER/ON SERVICE" S.B.
DIMMER ILL. PUSHBUTTONS
DIMMER DIAL ILLUMINATION
ILL. P/B "TAKE OVER/ON SERVICE" P.S.
Copyright according to law
Creation date:
Scale:
Drawn by:
Rev.:Sheet:
Art.:
Sheet:
Dimensions in millimeters
A0136782
27-3-2019HS
A4 1:2,50
1 1
L.mod. date:
KWANT CONTROLS
s n e e k - h o l l a n d
Contr. Unit BUK-C SPEC.
Engineer:HS
Title:
Drawing no:
Description:
2-Pot.meter+3-µSwitch/Handle
PANEL
CUT OUT
R≤3
92
138
144
96
16
1
2
0
°
13
57
2
TERMINAL BLOCK
10
105
15
MA
X.
MECHANICAL LOCKING DEVICE
Related Documents
