PROPRIETARY AND CONFIDENTIAL Multi-PDN and Multi-Aux Configuration in eHRPD.

PROPRIETARY AND CONFIDENTIAL

Multi-PDN and Multi-Aux Configuration in eHRPD

2PROPRIETARY AND CONFIDENTIAL

Agenda

Config Nodal

Config Node

Message Flow and pcap

3PROPRIETARY AND CONFIDENTIAL

Introduction

PDN connections setup: Main service connection(Main A10) is responsible for creating the default PDN connection. aux SoType = 59 is responsible for creating additional PDN connections.

If you configure an “Aux SoType = 59” on Landslide GUI, it’s not a real Aux connection, it just represents an addtionational PDN connection. Its corresponding APN indicates which PDN it connects to.

If you configure an “Aux SoType = 67” on Landslide GUI, it’s a real Aux Connection. Its corresponding APN indicates which PDN this Aux is related with.

If configuring total N PDN connections including main service connection and M real auxiliary service connection, you should set the aux number to N-1+M.

In this test case, I take 2 PDN, and 3 real auxiliary for example.

4PROPRIETARY AND CONFIDENTIAL

Presupposition

In successor pages, we use main for short of main service connection, Aux for short of auxiliary service connection.

I just show the difference between Multi-PDN and Multi-Aux with normal eHRPD case. Other parts are configured the same with normal eHRPD case.

PROPRIETARY AND CONFIDENTIAL

Configuration in Nodal

6PROPRIETARY AND CONFIDENTIAL

Nodal Test Configuration

7PROPRIETARY AND CONFIDENTIAL

Nodal Network Device

8PROPRIETARY AND CONFIDENTIAL

Nodal Network Device - Cont

The number of LMA Node is the same of number of PDN.

9PROPRIETARY AND CONFIDENTIAL

Nodal RP-PPP

10PROPRIETARY AND CONFIDENTIAL

Nodal RP-RP-PDN1

• We should assign N PDN on the first N connections.

• The Item in “service instance APN Assignments” is associated with that in “Service Instance Setting”. That is: • Main -> P0 • Aux-1 -> P1• Aux-2 -> P2• Aux-3 -> P3• Aux-4 -> P4

11PROPRIETARY AND CONFIDENTIAL

Nodal RP-RP-PDN2

12PROPRIETARY AND CONFIDENTIAL

Nodal RP-RP-Aux1

13PROPRIETARY AND CONFIDENTIAL

Nodal RP-RP-Aux2

14PROPRIETARY AND CONFIDENTIAL

Nodal RP-RP-Aux3

PROPRIETARY AND CONFIDENTIAL

Configuration in Node

16PROPRIETARY AND CONFIDENTIAL

Node Emulator Configuration

17PROPRIETARY AND CONFIDENTIAL

Node Network Devices

18PROPRIETARY AND CONFIDENTIAL

Node Network Devices - Cont

19PROPRIETARY AND CONFIDENTIAL

Node RP-A11

20PROPRIETARY AND CONFIDENTIAL

Message Flow for PDN Connection

Please refer to section 5.5.4.1.1 of X.S0057-v3 for details.

21PROPRIETARY AND CONFIDENTIAL

Each color block represents a connection configured in GUI.