47 10/23/2019 - gamma/ XL polymer blending & dry feed solutions ProMinent ® gamma/ XL Solenoid Diaphragm Metering Pumps Overview: gamma/ X The new gamma/ XL is a solenoid metering pump with predictive intelligence. Thanks to its controlled solenoid drive with sensor-free pressure measurement, it detects hydraulic faults even in the case of minimal deviations – immediately and optimally matching its output to the pressure conditions and properties of the medium while protecting the pump and piping systems from overload situations. The gamma/ XL covers a capacity range of .006 GPD at 363 PSIG to 21.1 GPH at 29 PSIG (depending on pump version). Electronic stroke length adjustment via click wheel Volume adjustment in GPH or LPH Manual, Analog, Contact and Batch modes optional Integrated system pressure measurement BUS interfaces such as Profibus, CANbus, PROFINET and Modbus High visibility of LED-indicator lights Large illuminated display Analog output for stroke length and stroke rate transmission Auto compensates programmed feed rates during back pressure fluctuations As low as 1 mL/hr continuous feed rate with regulated solenoid drive Turn down ratio up to 40,000:1 Integrated pressure measurement and display Available diaphragm rupture indicator Integrated 7-day timer Detects Overpressure/ No Pressure (broken discharge line) and gas in the liquid end Automatically sets optimal speed and stroke based on GPH settings (when set to automatic) New configurable input/output gamma/ XL and delta ® footprints are identical DULCOTEST ® sensors DULCOMETER ® instrumentation pump spare parts & accessories motor-driven metering pumps solenoid-driven metering pumps product overview
6
Embed
ProMinent gamma/ XL Solenoid Diaphragm Metering Pumpsprominent.us/promx/pdf/gamma_XL_Catalog_Section_19.pdf · Solenoid Diaphragm Metering Pumps Overview: gamma/ X The new gamma
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
4710/23/2019 - gamma/ XL
polymer blending &
dry feed solutionsProMinen t ® gamma/ XL So leno id D iaphragm Mete r ing PumpsOverv iew: gamma/ X
The new gamma/ XL is a solenoid metering pump with predictive intelligence. Thanks to its controlled solenoid drive with sensor-free pressure measurement, it detects hydraulic faults even in the case of minimal deviations – immediately and optimally matching its output to the pressure conditions and properties of the medium while protecting the pump and piping systems from overload situations. The gamma/ XL covers a capacity range of .006 GPD at 363 PSIG to 21.1 GPH at 29 PSIG (depending on pump version).
Electronic stroke length adjustment via click wheel Volume adjustment in GPH or LPH Manual, Analog, Contact and Batch modes optional Integrated system pressure measurement BUS interfaces such as Profibus, CANbus, PROFINET and Modbus High visibility of LED-indicator lights Large illuminated display Analog output for stroke length and stroke rate transmission Auto compensates programmed feed rates during back pressure fluctuations As low as 1 mL/hr continuous feed rate with regulated solenoid drive Turn down ratio up to 40,000:1 Integrated pressure measurement and display Available diaphragm rupture indicator Integrated 7-day timer Detects Overpressure/ No Pressure (broken discharge line) and gas in the liquid end Automatically sets optimal speed and stroke based on GPH settings (when set to automatic) New configurable input/output gamma/ XL and delta® footprints are identical
DU
LCO
TEST®
sensorsD
ULC
OM
ETER®
instrumentation
pump spare parts &accessories
motor-driven
metering pum
pssolenoid-drivenm
etering pumps
productoverview
48 10/23/2019 - gamma/ XL
poly
mer
ble
ndin
g &
dry
feed
sol
utio
nsProMinen t ® gamma/ XL So leno id D iaphragm Mete r ing PumpsCapac i ty Da ta
PSIG (bar) GPH* (L/H) ml/stroke Strokes/min in ft (m) NPE/NPB/PVT SS
P roMinen t ® gamma/ XL So leno id D iaphragm Mete r ing Pumps
Maximum stroke length: 110 mm solenoid approx. 2mm
Materials of construction:Housing Fiberglass reinforced PPE (Polyphenylene Ether)Diaphragm PTFE faced EPDM with plastic coreLiquid end options Acrylic/PVC, PVDF, Stainless SteelEnclosure rating IP 66Power supply 100 – 230 VAC 1 Phase 50 / 60 Hz ± 10%Power consumption 2508/ 1608/ 1612/ 1020/ 0730/ 0450/ 0280 78 WCheck valves Double ball suction / discharge (PVT4 with spring loaded single ball)Power cord 6ftRelay cable (optional) 6ftRelay Options:Identcode Option 1 Fault indicating relay, N/C 230 V - 6 A Max.Identcode Option 4 Fault indicating relay, N/C 24 V - 1 A Max. Pacing relay, normally open 24 V - 100 mA Max.Identcode Option C 4 – 20 mA current output Fault indicating relay 24 V - 100 mA Max.Ambient temperature range:In operation 14 °F to 113 °FStorage & Transport 14 °F to 122 °FMax. fluid operating temp Material Constant Short Term* Acrylic/PVC 104 °F 140 °F PVDF 122 °F 248 °F SS 122 °F 248 °F 15 minutes at 29 psi maximumClimate: 95% Relative humidity – non-condensingSound pressure level: LpA < 70 dB according to EN ISO 20361Warranty: 2 years on pump drive, 1 year on liquid endValve threads: NP / PVT M20 x 1.5 (provided with adapters for tubing)Standard production test: All pumps are tested for capacity at maximum pressure prior to shipmentContact input:Minimum pulse duration 10 msMaximum pulse input 50 pulses / secondAnalog Input Impedance 120 OhmsRecommended Viscosity Max. 0-50 cPs for standard liquid end Max. 50-200 cPs for valve with springs Max. 20-500 cPs for auto-degassing liquid ends Max. 500-1000 cPs for high-viscosity liquid ends
DU
LCO
TEST®
sensorsD
ULC
OM
ETER®
instrumentation
pump spare parts &accessories
motor-driven
metering pum
pssolenoid-drivenm
etering pumps
productoverview
50 10/23/2019 - gamma/ XL
poly
mer
ble
ndin
g &
dry
feed
sol
utio
ns
I den tcode Order ing Sys tem
ProMinen t ® gamma/ XL So leno id D iaphragm Mete r ing Pumps
GXLaRegional Version
US
Version Version2508 07301608 04501612 02801020
PVNPSS
BEFT
2347
67MNQ
01
0
0
U
ADVW
014C
01
03CDEMPR
Communication:0
ENGXLa US 1608 PV T 2 6 0 0 0 U A 0 0 0 0 EN
Diaphragm rupture indicator:
without connection
Hydraulic connections:
Liquid end version:
Without relayRelay, pre-set to:
100-240 V, ±10 %, 50/60 HzElectrical Connection:Standard, with logo
Without
Standard
CANopenManual + external with pulse control + analogue 0/4 - 20 mA
Control Variants:
Language:
Connection 1/2" x 3/8" USAConnection 3/8" x 1/4" USA
Standard Diaphragm/ EPDM seal
Version for highly viscous media
Standard connection for SST and PVT4 ONLY
Connection 1/4" x 3/16" USA
Standard Diaphragm/ PTFE seal
Bleed function, no valve springsBleed function, with valve springs
N. American plug, 115 V, 6 ftN. American plug, 115 V, 16 ft
Without accessoriesAccessories:1 x N/O 24 V – 100 mA, such as 1 + 4 – 20 mA output2 x N/O 24 V – 100 mA, such as 1 + pacing relay1 x changeover contact 230 V – 2 A, fault indicating relay N/C