We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.) Tel : +886 - 3 - 461 - 8618 Fax : +886 - 3 - 461 - 8677 www.prolightopto.com ProLight PS2P-TFPE-GP 0.2W Power LED Technical Datasheet Version: 1.2 Features ‧High Color rendering index ‧Good color uniformity ‧Industry’s first lighting-class LED ‧Low Voltage DC operated ‧Instant light (less than 100ns) ‧No UV Main Applications ‧The perfect light color for the Bakery counter ‧T8/T5 tube ‧LED bulb ‧Indoor/Outdoor Commercial and Residential Architectural Introduction ‧PS2P qualifies as the JEDEC Level 1 MSL sensitivity level and suitable for SMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation. 2016/10 DS - 0078
15
Embed
ProLight PS2P-TFPE-GP 0.2W Power LED Version: 1 · PDF fileProLight PS2P-TFPE-GP 0.2W Power LED Technical Datasheet Version: 1.2 Features ... P2 25 28.5 【1
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
ProLight PS2P-TFPE-GP0.2W Power LED Technical DatasheetVersion: 1.2
Features‧High Color rendering index ‧Good color uniformity‧Industry’s first lighting-class LED ‧Low Voltage DC operated‧Instant light (less than 100ns)‧No UV
Main Applications ‧The perfect light color for the Bakery counter‧T8/T5 tube‧LED bulb‧Indoor/Outdoor Commercial and
Residential Architectural
Introduction‧PS2P qualifies as the JEDEC Level 1 MSL sensitivity level and suitable forSMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation.
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
Radiation Color
Part Number Luminous Flux ΦV (lm) CRI
Pattern Emitter Minimum Typical Minimum
Lambertian Gold Plus PS2P-TFPE-GP 19.4 22 80
● ProLight maintains a tolerance of ± 7% on flux and power measurements.● ProLight maintains a tolerance of ± 2 on CRI measurements.● Please do not drive at rated current more than 1 second without proper heat sink.
Flux Characteristics at 60mA, TJ = 25°C
3
Optical Characteristics at 60mA, TJ = 25°C
Electrical Characteristics at 60mA, TJ = 25°C
ColorForward Voltage VF (V) Thermal Resistance
Min. Typ. Max. Junction to Slug (°C/ W)
Gold Plus 2.9 3.2 3.5 50
● ProLight maintains a tolerance of ± 0.1V for Voltage measurements.
Total
included Viewing
Angle Angle
RadiationColor
Color Temperature CCT (degrees) (degrees)
Pattern Min. Typ. Max. θ0.90V 2 θ1/2
Lambertian Gold Plus 2200 K - 2500 K 160 120
● ProLight maintains a tolerance of ± 5% for CCT measurements.
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
Absolute Maximum RatingsParameter Gold Plus
DC Forward Current (mA) 70
Peak Pulsed Forward Current (mA) 90 (less than 1/10 duty cycle@1KHz)
ESD Sensitivity> ±500V
(HBM per MIL-STD-883E Method 3015.7)
LED Junction Temperature 120°C
Operating Board Temperature-40°C - 90°C
at Maximum DC Forward Current
Storage Temperature -40°C - 120°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reflow Cycles 3
Reverse Voltage Not designed to be driven in reverse bias
4
Photometric Luminous Flux Bin StructureColor Bin Code
Minimum Maximum Available
Photometric Flux (lm) Photometric Flux (lm) Color Bins
Gold Plus
N2 19.4 22 All
P1 22 25 All
P2 25 28.5 【1】
● ProLight maintains a tolerance of ± 7% on flux and power measurements.● The flux bin of the product may be modified for improvement without notice. ● 【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order Possibility.
Forward Voltage Bin Structure Color Bin Code Minimum Voltage (V) Maximum Voltage (V)
Gold Plus
B 2.9 3.0
D 3.0 3.1
E 3.1 3.2
F 3.2 3.3
G 3.3 3.4
H 3.4 3.5
● ProLight maintains a tolerance of ± 0.1V for Voltage measurements.
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
Average Ramp-Up Rate3°C / second max. 3°C / second max.
(TSmax to TP)Preheat– Temperature Min (TSmin) 100°C 150°C– Temperature Max (TSmax) 150°C 200°C– Time (tSmin to tSmax) 60-120 seconds 60-180 seconds
Time maintained above:– Temperature (TL) 183°C 217°C– Time (tL) 60-150 seconds 60-150 seconds
Peak/Classification Temperature (TP) 240°C 260°CTime Within 5°C of Actual Peak
10-30 seconds 20-40 secondsTemperature (tP)Ramp-Down Rate 6°C/second max. 6°C/second max.Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.
● We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal Industry Co., Ltd.) for lead-free soldering.
● Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) This kindof solder pastes may cause a reliability problem to LED.
● All temperatures refer to topside of the package, measured on the package body surface.● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used. It should be confirmed beforehand whether thecharacteristics of the LEDs will or will not be damaged by repairing.
● Reflow soldering should not be done more than three times.● When soldering, do not put stress on the LEDs during heating.● After soldering, do not warp the circuit board.