Page 1
������ ��� �� ��� �� ����
p/n 33-D124 Rev B
http://infocenter.3dsystems.com/projetmjp2500/user-guide .
PProJet® MJP 2500/2500 Plus 3D MJP(Multi-Jet Printer) . 3D 3D (CAD) 3D . RP(rapid prototype)
. , ( ) (MDM).
:: ProJet® MJP 2500 2500 Plus .
ProJet® MJP 2500/2500 Plus VisiJet®
ProJet® MJP 2500 ProJet® MJP 2500 Plus
*VisiJet® M2R-WT
( , )
*VisiJet® M2R-WT
( , )
*VisiJet® M2R-BK
( , )
*VisiJet® M2R-BK
( , )
VisiJet® M2G-DUR
(VisiJet ProFlex, PP )
VisiJet® M2G-DUR
(VisiJet ProFlex, PP )
N/A VisiJet® M2R-GRY
( , )
N/A VisiJet® M2G-CL
(VisiJet Armor, Clear, ABS )
N/A *VisiJet® M2R-CL
( , )
N/A VisiJet® M2-EBK
( , )
�
Page 2
NN/A VisiJet® M2-ENT
( , )
* VisiJet® (RWT, RCL RBK) .
: VisiJet® M2G-CL VisiJet® M2G-DUR . .
Page 3
UV : UV . UV , , /
. .
: . . .
: . . . .
.
: .
: .
: .
:: .
. , .
, .
.
.
: . , , . .
: . . UV .
: .
3D . .
3D . .
, .
.
GHS/SDS(Global Harmonized Standards/Safety Data Sheets) .
.
, , .
3D Systems .
3D . 3D “ ” .
.
/ .
, GHS/SDS(Global Harmonized Standards/Safety Data Sheet) .
Page 4
100% , . .
, .
3D . NIOSH ( ) .
. .
/
.
. . .
. GHS/SDS .
.
//
.
- .
, .
, .
( ) . VisiJet® .
VisiJet® , .
- 3D .
.
.
100% .
, .
. .
.
. , 15
, .
3D .
.
. . .
.
. .
, . (CPR) .
. .
. .
, . ,
, , , .
Page 5
. , 1
.
. (IPA)
. .
ProJet® MJP 2500 2500 Plus ,
.
(GHS/SDS)Chemtrec (800) 424-9300, +1-703-527-3887
GHS/SDS(Global Harmonized Standards/Safety Data Sheet) . 3D Systems – http://www.3dsystems.com/support/materials/msds .
. , .
3D Systems .
VisiJet® (ProJet® 2500 ProJet® 2500 Plus) VisiJet® ME SUP
2 5
60°F(16°C) ~ 80°F(27°C)
95°F(35°C)
, , UV 230°F(110°C) , , .
“ ” . , 3D Systems 3D Systems
.
Page 6
(White) . (Black) . 3D . .
.
.
. . ProJet® MJP 2500 .
Page 7
GHS/SDS , . .
.
. VisiJet® .
.
( ) . VisiJet . VisiJet
, .
, .
, . “ ” ( ) .
.
. 3D Systems 3D Systems .
. ( .) GHS/SDS (Global Harmonized Standards / Safety Data Sheets)
(Waste Pro le Worksheet) SNUR(Signi cant New Use Regulation - ) VisiJet® . .
3D Systems 3D Systems .
3D Systems . .
3D . 3D .
. , .
. .
Page 8
. 3D Systems 3D .
1 , 1 , , . ( ), . ,
.
: , , . .
3D .
GHS/SDS . ( ) .
. (IPA) . . ,
.
, . , .
VisiJet® “ " “ ” . . , NFPA(National Fire Protection Association) Class B .
Page 9
ProJet MJP 2500 ProJet® MJP 2500 .
ProJet MJP 2500 PProJet® MJP 2500 -
�� �� (HD)
���(xyz) 800 x 900 x 790 DPI
Z� �� �� (��/��)
1 : 0.29 2 : 0.22 3 : 0.14
mm/hr in 1 : 7.3 2 : 5.5 : 3.5
Z� �� ��(��/��)
1 : 3.5 2 : 4.5 3 : 7.3
hr/mm 1 : 0.14 2 : 0.18 3 : 0.29
�� ��(xyz) 11.6 x 8.3 x 5.6 (294 x 211 x 144 mm)
��� - �� ��� ���, ��
1 ±0.004(25.4mm ±0.1016)
� �� 32
�� � *VisiJet® M2R-WT ( , ), *VisiJet® M2R-BK ( , ) VisiJet®M2G-DUR (VisiJet ProFlex, Clear, PP )
* VisiJet® (RWT RBK) .
: VisiJet M2G-DUR . .
�� ,
� UV
� � 1.5kg, 1.4kg
- 2 2
��� � VisiJet® M2 SUP
�� ��
�� �� . , .
Page 10
ProJet MJP 2500 Plus PProJet® MJP 2500 Plus -
�� �� (HD)
���(xyz) 800 x 900 x 790 DPI
Z� �� �� (��/��)
1 : 0.29 2 : 0.22 3 : 0.14
mm/hr 1 : 7.3 2 : 5.5 3 : 3.5
Z� �� �� (��/��)
1 : 3.5 2 : 4.5 3 : 7.3
hr/mm 1 : 0.14 2 : 0.18 3 : 0.29
�� ��(xyz) 11.6 x 8.3 x 5.6 (294 x 211 x 144 mm)
��� - �� ��� ���, ��
1 ±0.004(25.4mm ±0.1016)
� �� 32
�� � *VisiJet® M2R-WT ( , ), *VisiJet® M2R-BK ( , ), *VisiJet®M2R-CL ( , ), VisiJet® M2-EBK ( , ), VisiJet® M2-ENT (
, ), VisiJet® M2G-DUR (VisiJet ProFlex, , PP ), VisiJet® M2G-CL (VisiJet Armor, , ABS ), VisiJet® M2R-GRY ( , ) VisiJet® M2R-TN
* VisiJet® (RWT, RCL RBK) .
: VisiJet® M2G-CL VisiJet® M2G-DUR . .
� UV
� � 1.5kg, 1.4kg
- 2 2
��� � VisiJet® M2 SUP
�� ��
�� �� . , .
. .
VisiJet M2R-TN ProJet MJP 2500 VisiJet ® M2R-TN
Page 11
��� ��(��� ��)� 80%� ±50μm
ProJet® MJP 2500 Plus VisiJet ® M2R-TN
ProJet® MJP 2500 Plus/Tan
18 9
6 3
3D 54 24
+-50um/80%
800-900 dpi
Page 12
Supports
80% ± 50um .
, Geller /
, ,
=
Page 14
3D 2 ( ) . ,
.
(UV) . . . ( )
.
4 2 ( ) . 2 (( ) . . 2
. . . . .
. / 2 . ProJet® .
ProJet® MJP 2500
: , Planarizer UV .
: . . .
(UI): . , . UI
.
: . .
(MDM): MDM Push/Push . . MDM .
x ( ) (x) y ( ) (x) z ( ) .
(X x Y x Z) (X x Y x Z)
11.6" x 8.3" x 5.6" 294mm x 211mm x 144mm
Page 15
3D
(MDM)
ProJet® MJP 2500/2500 Plus 1 2: VisiJet® M2 SUP . MDM .
1 2: 3D VisiJet® . MDM .
: ProJet® 2500 , , .
.
. .
: 2 . , .
Page 16
: . . . UI
. (A)
: . UI .
: (60 ) . .
ProJet® 2500 .
ProJet MJP 2500 ProJet® 2500 3D . ,
. http://infocenter.3dsystems.com/projetmjp2500/facility-requirements-guide .
ProJet MJP 2500 ProJet® 2500 3D . 3D Systems
3D . https://3dscentral.3dsystems.com .
ProJet MJP 2500 ProJet® MJP 2500 . .
. http://infocenter.3dsystems.com/projetmjp2500/post-processing-guide .
ProJet MJP 2500 3D ProJet® MJP 2500 .
http://infocenter.3dsystems.com/projetmjp2500/quick-start-guide .
ProJet MJP 2500 Global Harmonized Standards/Safety Data Sheets (GHS/SDS) GHS/SDS . . GHS/SDS .
GHS/SDS . http://www.3dsystems.com/support/materials/msds
: .
3D SPRINT™ 3D SPRINT™
.
. 5 . 5 .
®
®
®
®
®
Page 17
(A)UI . (A) . 1-7 .
1. AAccess Platform( ) - .
2. Start Print Job( ) - .
3. Refresh Print Queue( ) - .
4. Current Layer Info( ) - .
5. Print Sender( ) - ID .
6. Printer State( ) - . .
Ready( ) - .
Printing( ) - .
Preparing Build( ) - .
Busy( ) - .
Standby( ) - .
Paused( ) - .
Complete( ) - .
Aborted( ) - .
Warming Up( ) - Ready( ) .
Waiting( ) - Chamber Cooling Down( ) - .
Initializing( ) - .
Recovery( ) - .
Error( ) - Error( ) .
Material Needed( ) - .
7. Waste Bag Usage( ) - .
Prints( ) (B) (1) .
Page 18
Materials( ) (C) .
MMaterial Status( ) - .
Part Message( ) - .
Support Message( ) - .
- 4 . .
1. Status( ) -
a. – b. – , c. – . d. – e. – f. – g. – h. –
2. Material( ) -
3. Color/Type( / ) -
4. Order Number( ) -
5. Original Weight( ) -
6. Current Weight( ) -
7. Batch( ) -
8. Expires( ) -
: .
.
Page 19
99. Make Active( ) - .
TOOLS( ) (D)Tools( ) .
1. Printer Info( ) - .
Page 20
22. Diagnostics( ) - Diagnotics( ) . Diagnostics Menus( ) .
Diagnostics Menus( ) - Tools( ) Diagnostics( ) , .
1. Inspect Planarizer Wiper Blade(Planarizer ) - Planarizer . Planaizer .
2. Inspect Planarizer Ducts(Planarizer ) - Planarizer . Planarizer .
3. Head Maintenance Cycle( ) - .
4. Jet Check Test( ) - . .
5. 3- - . .
6. Fault History - .
7. Unlock Top Door( ) - .
3. 3. Material Change Wizard( ) -
. .
.
4. Customer Usage( ) - .
5. Waste Bag( ) - . .
.
6. Operator Maintenance( ) - Operator Maintenance( ) .
. .
Ready( ) .
7. Save Log - .
Page 21
8. PPower Options( ) - , , .
UI . .
9. Install Upgrade( ) - USB .
(E)
1. Network Settings( ) - .
2. Email Alerts( ) - ..
: . .
3. DDate Time Settings( ) - Date Time Settings( ) .
4. Language Settings( ) - UI .
5. APP Settings(APP )- UI UI .
6. -
- .
- . .
Page 23
. (60
) .UI . 1~2 . UI 3D Systems Status( )
.
UI . .
: .
. 0 .
1. READY( ) .
2. Tools( ) > Waste Bag( ) (1) .
Page 24
3. Replace Waste Bag( ) .
4. MDM .
5. MDM .
6. .
: , . 311215-00 . 30 1 .
7. UI .
8. .
9. . ,
.
10. MDM .
11. 0% .
, .
: MDM .
: . .
MDM (A) . .
1. MDM .
Page 25
2. MDM .
3. (B) 1/2 .
4. (C) . . .
5. .
6. . 1
. .
: . .
: . .
MDM :
1. MDM .
Page 26
2. , .
3. MDM .
: .
: MDM .
: . .
93-134 ~ 137 -
4. .
5. (A) 1/2 .
Page 27
6. MDM (B) .
7. UI Materials( ) (C) MDM .
: .
. / . .
1. Printer State( ) Ready( ) Standby( ) .
Page 28
2. Access Platform( ) .
: Access Platform( ) .
3. . .
4. .
5. . . ,
.
6. ( ) .
Page 30
MDM( )
. , 20 . Status( ) .
, Printer State( ) "Warming( )" "Busy( )" 1 15( ) .
Status( ) Warmup Time Remaining( ) .
Ready( ) Head Maintenance Cycles( ) .
.
.
UI . .
. . .
Access Platform
1. UI Access Platform( ) .
2. .
: . .
3. , , .
Page 31
4. Tools( ) > Waste Bag( )(1) .
5. . Replace Waste Bag( )(2) .
6. MDM .
: MDM .
: , .
7. .
8. .
9. . , .
10. MDM .
11. UI 0% .
MDM /Materials( ) .
. .
33D SPRINT . . 3D SPRINT™ (3D SPRINT™ ) .
/ 3DSPRINT™ .
TM
Page 32
: 3D SPRINT™ http://infocenter.3dsystems.com/projetmjp2500/software-downloads .
.
: . .
:
.
1. . Printer( ) (1) .
2. . (2a) Next( ) (2b) .
Page 33
1. . (3a) Next( ) (3b) .
: MCO( ) . MCO .
1. . (4a) Next( ) (4b)
.
1. . . / .
.
Page 34
1. .stl Print (1) > (2) .
2. Open( ) (3).
3. Auto Place( ) (4a) > (4b) . . > .
Page 35
4. Add to Print Queue( )(5a) .
5. . Add to Queue( ) (5b) .
Page 36
6. Print Queue( ) (7) .
1. UI Prints( ) (1) .
2. (2).
3. Print( )(3) .
: . .
1. "Access Platform( )"
. .
2. .
Page 37
PProJet® MJP 2500 ProJet® MJP 2500 Plus . 30
. 7 , . UI . . Tools( ) > Printer Shutdown( ) "Standby( )"
.
ProJet® MJP 2500 & ProJet® MJP 2500 Plus
( ) 30 7
( ) 8 20
(60 ) , Dry Out .
.
3D .
1. .
2. Tools( ) (1) .
3. Shutdown( ) (2) . Tools( ) .
4. , .
5. . OK .
Page 38
6. , . .
7. , . .
: (60 ) , . .
Page 40
MCO
(MCO) , (MCO) .
(MCO) .
: . . –MCO Cleaner 2500 2 , 2 2 .
: MCO 2 .
: MCO .
1. Ready( ) . UI Tools( ) > Material Change Wizard( ) .
2. Start Material Changeover( ) .
3. Yes( ) .
Page 41
4. .
5. MCO . , Replaced
Waste Bag( ) . Use Existing Bag( ) .
6. .
Page 42
7. , MDM , OK .
8. MCO Cleaner 2500 2 MDM . OK .
: 30-45 .
: , 30 .
9. MCO . 30-45 .
Page 43
10. , MDM . OK .
11. .
12. MDM . OK .
: , 30 .
13. : 30-60 .
14. .
Page 44
(MCO) (MCO) ( M2R-WT, M2R-BK and M2R-CL) .
: MCO . .
1. " " .
. MCO .
VisiJet M2??? .
VisiJet M2??? .
(MCO) . .
F= MCO
N= MCO , OK
F, N = " MCO" "MCO " .
(MOC)
/ M2RCL(RL)
M2RWT(RT)
M2RBK(RK)
M2R-CL(RR)
M2R-WT(RE)
M2R-GRY
(RG)
M2R-BK
(RB)
M2R-TN
(DY)
M2G-CL
(GL)
M2G-DUR
(GD)
M2ENT
(NT)
M2EBK
(CB)
M2 RCL(RL)
X F,N F,N F,N F,N F,N F,N F,N F,N F,N F F
Page 45
MM2RWT(RT)
F,N X F,N F,N F,N F,N F,N F,N F F F F
M2 RBK(RK)
F,N F,N X F,N F,N F,N F,N F,N F,N F,N F F
M2R-CL (RR)
F,N F,N F,N X F,N F,N F,N F,N F,N F,N F F
M2R-WT (RE)
F,N F,N F,N F,N X F,N F,N F,N F F F F
M2R-GRY(RG)
F,N F,N F,N F,N F,N X F,N F,N F F F F
M2R-BK(RB)
F,N F,N F,N F,N F,N F,N X F,N F,N F,N F F
M2R-TN (DY)
F,N F,N F,N F,N F,N F,N F,N X F,N F,N F F
M2G-CL(GL)
F,N F F,N F,N F F F,N F X F,N F F
M2G-DUR(GD)
F,N F F,N F,N F F F,N F F,N X F F
M2 ENT(NT)
F F F F F F F F F F X F,N
M2 EBK(CB)
F F F F F F F F F F F,N X
Page 46
UI .
: Ready( ) .
.
UI
UI Operator Maintenance( )
, .
.
: 18-28°C(64-82°F)
: 18-24°C(64-75°F)
: 30 ~ 70% RH
, .
. , . .
: . - P/N 310259-00.
Page 49
2. .
3. 50% . ,
.
Page 50
4. .
Planarizer
Planarizer Planarizer . . Planarizer
.
: Planarizer .
Planarizer :
1. Tools( ) > Diagnostics( ) > Inspect Planarizer Ducts(Planarizer ) .
2. Planarizer (2) .
Page 51
3. Planarizer Planaerizer .
4. .
5. .
6. Planarizer (4).
7. .
.
8. , .
9. .
10. UI > > Planarizer Yes, that they have been cleaned( , ) .
Planarizer
Page 52
Planarizer Planarizer . .
1. UI Tools( ) > Diagnostics( ) > Inspect Planarizer Wiper Blade(Planarizer ) .
2. Planarizer .
3. .
4. Planarizer .
5. .
: .
6. Planarizer .
7. .
8. UI Tools( ) > Operator Maintenance ( ) > Planarizer Wiper Blade (Planarizer ) > Yes, that it has been
cleaned( , ) .
Page 53
. .
: .
1. UI Tools( ) > Diagnostics( ) > Inspect Planarizer Ducts(Planarizer ) . .
2. .
3. .
4. y- .
5. .
Page 54
5. .
6. .
UV ( )
UV ( ) UV ( )
.
UV
1. Tools( ) > Diagnostics( ) > Inspect Planarizer Ducts(Planarizer ) .
2. UV .
3. .
4. UV .
: .
: UV .
Page 55
: .
5. , .
UV
1. UV UV .
2. .
Page 56
.
( )
:
(1) .
: .
1. UI Tools( ) > Diagnostics( > Head Maintenance Cycle( ) (1) .
2. , Jet Check Test( ) (2) ,
3. OK .
4. , . .
: 6 .
Page 57
5. .
6. Access Platform( ) , Continue( )
.
7. .
8. JJet Check Evaluation Criteria( )
.
9. ( ), .
10. ( ), 1-7 .
11. 3 , .
12. .
Page 58
.
JJet Check Evaluation Criteria( )
3 . 3 1 .
3 1: / ?
: 10
: 5
, 2 .
3 2: 5 ?
Page 59
5 , 3 .
33 3: 2 ?
, .
Page 60
. 3D Systems .
.
.
: . .
: , 3D .
. .
: Windex™ . Kimwipe™ . .
. .
1. .
.
2. (IPA) .
3. .
: .
Page 61
. .
Simple Green . .
.
:
, MEK
.
MDM .
, MDM . ( ), / .
: MDM , . .
MDM .
.
.
: ( ) . .
Page 62
.
. , .
ProJet VisiJet .
3DSSPRINT .
. .
(20171017 ) ProJet®MJP 2500 . .
X Y Z
*VisiJet® M2 RWT ( , ) 0.50% 0.50% 0.00%
*VisiJet® M2 RCL ( , ) 0.50% 0.50% 0.00%
*VisiJet® M2 RBK ( , ) 0.50% 0.50% 0.00%
VisiJet® M2R-WT ( , ) 0.70% 0.70% -0.60%
VisiJet® M2R-BK ( , ) 0.70% 0.70% -0.60%
VisiJet® M2R-BK ( , ) 0.70% 0.70% -0.60%
VisiJet® M2 EBK ( , ) 0.00% 0.00% 0.00%
VisiJet® M2 ENT ( , ) 0.00% 0.00% 0.00%
VisiJet® M2G-DUR ( , PP ) -0.30% -0.20% -0.30%
VisiJet® M2R-GRY ( , ) 0.70% 0.70% -0.60%
VisiJet® M2G-CL ( , ABS ) -0.05% 0.05% -0.40%
* VisiJet® (RWT, RCL RBK) .
CAD X Y .
CAD .stl .
XCAD YCAD X Y .
, .
. .
.
XPART YPART X Y .
: CAD , .
.
XCAD = XCAD x (1 + X ) x (XPART / ( ) XCAD)
YCAD = YCAD x (1 + Y ) x (YPART / YCAD)
,
® ®
Page 63
X Scaling Factor = (1+ (XCAD - XPART) / XPART) x 100 (answer will be a percentage)
Y Scaling Factor = (1+ (YCAD - YPART) / YPART) x 100 (answer will be a percentage)
::
CAD X = 3.000"
CAD Y = 5.000"
X = 2.998"
Y = 4.989"
X Scaling Factor = (1+ (3.000 - 2.998) / 2.998) x 100 = 0.067%
Y Scaling Factor = (1+ (5.00 - 4.989) / 4.989) x 100 = 0.22%
( A B) .
A .
1. 3D SPRINT™ Print > Printer Tools ( )> Printer Setting( ) .
2. Add( ) .
4. SET( ) .
Page 64
5. . XYZ
. .
B .
1. 3DSSPRINT Printer( ) .
2. ( ) Next( ) .
3. Next( ) .
Page 65
4. Print Mode( ) Next( ) .
5. A Build Style( ) Set( ) .
6. . XYZ
. .
7. . Print Queue( )
.
. .
ProJet MJP 2500 .®
Page 66
, ,
.
�� ��� ��� ���� �� ��� ��� ��� ����� �� ��� ��� �����.
90-122 - 30 ( ,
), .
1.
.
2. ( ,
)
.
92-113 -
92-114 -
. 1. UI > Status( ) > Access Platform(
) .
2.
3. .
4.
.
5. .
6. .
7. UI > > >
8.
.
92-152 Planarizer ,
.
1. UI > Status( ) > Access Platform(
) .
2.
3. .
4. .
5. .
6. .
7. UI > > >
Page 67
93-120 ~ 123
93-130 ~ 133 / 1/2
93-134 ~ 137: /
93-168 - 171 - .
1/2
93-120 ~ 123 93-130 ~ 133 - , .
93-134 ~ 137 -
.
1.
.
2. ?
3. ?
4. 1/2
?
.
93-111/ 93-113 - /
. 1.
.
2. Error( )
.
3. ,
Diagnostics( )
.
93-114 -
. . .
- ? - ? - 1/2
? ,
60~90 .
93-200, 93-201 /
. .
93-295-296 - . .
94-203 Planarizer Planarizer . Planarizer .
.
1. UI > Status( ) > Access Platform(
) .
2.
3. .
4. .
5. .
6. .
Page 68
94-104
95-118
.
. ,
. , .
1. .
18°-24°C(64°-75°F) .
2.
. .
3.
.
4. 12
.
92-157 Y
94-207
. . .
94-301 - 307 - :
301 - :
. .
302 - : Z- .
z- 303 - :
. 304 - : Planarizer . 305 - :
. 306 - :
.
307 - : PDAC
PDAC
.
. .
Description
Page 69
DDescription
.UI .
1. .
2. 30 .
3. .
4. 10 .
5. .
6. .
7. 2 .
8. .
9. UI 1 . ,
.
UI “Printer Disconnected” .
. 1. .
2. 30 .
3. .
4. 10 .
5. .
6. .
7. 2 .
8. .
9. UI 1 .
10. UI 2 ~ 3 . ,
.
Page 70
DDescription
.UI UI ( ) .
1. .
2. 30 .
3. .
4. 10 .
5. .
6. .
7. 2 .
8. .
9. UI 1 .
10. UI 2 ~ 3 . ,
.
UI .
UI , 1 .
1. .
2. 30 .
3. .
4. 10 .
5. .
6. .
7. 2 .
8. .
9. UI 1 .
10. UI 2 ~ 3 . ,
.
Page 71
DDescription
UI .
.
1. .
2. 30 .
3. .
4. 10 .
5. .
6. .
7. 2 .
8. .
9. UI 1 .
10. UI 2 ~ 3 . ,
.
/
.
.
1. .
2. .
.
1. UI .
.
. 1. 20 .
2. .
.
3. .
.
. 1.
.
,
.
.
.
1. .
2.
.
. .
1. .
2. , . .
3. .
Page 72
DDescription
.
. 1. .
2. Visijet .
.
3. 2 .
4. .
.
. .
1. . .
2. (
). , RFID
. .
.
MCO "X" .
1.
.
2.
.
.
- .
. "Print platform has material on it"
.
1. UI Access Platform( ) .
2. .
3. . .
4. .
.
.
1. .
.
. , .
1. .
2. .
3. .
Page 73
DDescription
.
. 1. UI Print Platform( ) .
2. .
.
3. .
Warming( ) .
. 1. , Ready( ) 1
.
2. 1 , .
. .
3. , .
. . 1. 18-24C(64-75F)
.
2. 12 .
3. , . , .
UI
: Umbilical thermals LED UI .
: UI , , UI SD , .
UI UI . , .
UI .
Description
:
: ( ).
. ( ) .
1. . .
2. 3 , .
Page 74
Description
: ( ).
.
1. . . , Planarizer
Planarizer . Planarizer .
2. Planarizer Planarizer .
Planarizer . Planarize .
, .
: .
. " " " " .
1. Planarizer .
2. .
.
.
1. 10 .
,
.
2. Full/Full Low/Empty .
.
. 1/3 2/3 ( )
.
. .
:
: .
. " " " " .
1. .
2. .
. 1. .
2. .
: .
" " .
1. , .
.
2. , .
1/3 2/3 ( )
.
.
:
Page 75
Description
: .
. 1. ( ) .
2. UV .
.
1. .
.
2. ,
.
. . ,
.
( ).
. ,
.
.
.
.
:
, .
3DSSPRINT , .
/ / .
( ) .
. 3DSPRINT
.
:
: . z- ( ) . .
1. . 18°-24°C(64°-75°F) .
2. . .
3. .
4. 12 .
5. .
Page 76
Description
: .
1. .
2. .
3. ,
. .
. 1. . .
2. 3DSSPRINT .
:
.
( ) .
1. . ,
.
2. , . ,
.
.
3. . .
Veri cationwall /
Veri cation wall / .
. Veri cation wall .
, Planarizer Veri cation wall .
.
Page 77
/ : .
, . , . , .
ProJet 2500 UI Tools( ) > Printer Info( )
.
.
: , , .
.
US and Canada: 888-598-1438
UK and EMEA: +44 1442 279883
: +1 803-326-3930
ProJet 2500 3D Systems . 3D
, 3D Systems .
: 800-793-3669
: +49-6151-357357
3D Systems .
3D Systems http://www.3dsystems.com/support .
MSDS(Material Safety Data Sheets) http://www.3dsystems.com/support/materials/msds .
Page 78
Copyright © 3D Systems, Inc. All rights reserved. . 3D Systems, Inc.
. .
FCC FCC 15 , A . . , ,
, .
3D Systems .
(RFID) 13.56 MHz . RFID FCC 15 ,
Industry Canada RSS-210, European Council Directive 99/5/EC .
: (1) (2) , .
, FCC ID: 2ADGF-PJ2500 .
.
: 3D Systems .
End User Software License AgreementCertain Third Party Software Programs may be contained in the 3D Printer rmware and require the following noti cations:
Portions of this software (Win 7) Copyright © Microsoft 2017.
Portions of this software (VxWorks) Copyright © Wind River Systems, Inc.
Portions of this software (Android UI) Copyright © 1995-2015 Interionatal Business Machines Corporation and others. All rights reserved.
Portions of this software (zlib) Copyright © 1995 – 2017 Jean-loup Gailly and Mark Adler
Portions of this software (mini-gmp library) Copyright © 2007 Free software Foundation, Inc.
Portions of this software (Apache License 2.0) Copyright © 2017 The Apache Software Foundation, Licensed under the Apache License, Version 2.0.
Portions of this software (LibTIFF) Copyright © 1988-1997 Sam Le er, Copyright © 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that(i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of SamLe er and Silicon Graphics may not be used in any advertising or publicity relating to the software without the speci c, prior written permission ofSam Le er and Silicon Graphics.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUTLIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGESOF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THEPOSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THISSOFTWARE.
Portions of this software (Boost) Copyright © Beman Dawes, Daniel Frey, David Abrahams, 2003-2004 Copyright Rene Rivers 2004-2005. The Boostlicense is open source; the Open Source Initiative certi ed the Boost Software License 1.0 in early 2008.
Portions of this software (7-Zip) Copyright © 1999-2017 Igor Pavlov.
Portions of this software (Putty) Copyright © 1997-2017 Simon Tatham.
Portions of this software (Notepad++) Copyright © 2007 Free Software Foundation, Inc.
Portions of this software (TightVNC) Copyright © 1989, 1991 Free Software Foundations, Inc.
Portions of this software (Tinyxml) Copyright © 1995-2017 Jean-loup Gailly and Mark Adler.
Portions of this software (Minicsv) Copyright © 2015-2017 Frank Denis.
Libpng versions 1.0.7, July 1, 2000 through 1.6.30, June 28, 2017 are Copyright (c) 2000-2002, 2004, 2006-2017 Glenn Randers-Pehrson, are derivedfrom libpng-1.0.6, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list ofContributing Authors: Simon-Pierre Cadieux, Eric S. Raymond, Mans Rullgard, Cosmin Truta, Gilles Vollant, James Yu, Mandar Sahastrabuddhe,Google Inc., Vadim Barkov.
Page 79
Portions of this software (Google-test) Copyright © 2008, Google Inc. All rights reserved.
Portions of this software (Rapidjson) Copyright © 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved. The Msinttypes r29Copyright © 2006-2013 Alexander Chemeris. All rights reserved.
Portions of this software (SimpleJSON) Copyright © 2006 Bob Ippolito.
Portions of this software (SQLite) Copyright © 2008-2012 Zetetic LLC. The code for SQLite has been dedicated to the public domain by the authors.
Portions of this software (JPEG) is Copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as speci ed below.
Portions of this software (Chilkat) Copyright © 2000-2017 Chilkat Software, Inc. All rights reserved.
Portions of this software (OpenDHCP) Copyright © 2007 Free Software Foundations, Inc.
Page 80
3D Systems .
.
FCC Part 15 , A . . , . .
, .
3D Systems .
Ce dispositif est conforme aÌ la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujetaux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage preìjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,y compris un brouillage susceptible de provoquer un fonctionnement indeìsirable.
A ICES-003 .
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
EEU: A . , .
ISM(Industry-Science-Medical) , ISM .
3D Systems .
EC La Déclaration de CE de Conformité
Page 82
- . .
- (UV) . , .
- UV . .
3D zip .
(HMS) - .
/ ( / %) - .
- . .
(MDM) - . MDM 2 2 .
( ) - .
- , Planarizer UV .
- 3D 2 ( ) . . (UV)
. UV . UV . (2 ) .
.
- . , .
.
( %) - .
- .
(UI) - . UI , , .
UV - UV .
- . MDM . , .
- / . , .
X- - .
Y- - .
Z- - .
.stl - 3D (CAD) . .
.3dprint - 3DSPRINT .
3DSPRINT - .