Projects & Solutions SHERIDAN MARINE By River, By Road, By Mail... Order the Solutions 01491 652 085 Mast Varnishing Preparing Carefully remove the mast, scrape & sand the old varnish off and sand the mahogany to a smooth, warm brown finish. Repairing If the cross member has detached you will need to reattach this as well as you can. Wooden wedges and adhesive can help. Unfortunately it is not always possible to fix this economically with long lasting effect. A new mast is the better option here. Wet or Dry Sand Paper - CM864 Scraper - CM9114 Protecting Protecting the warm brown mahogany wood is key. Apply coats of Wood Impreg to the bare wood so that this varnish soaks deep into the wood grain. Wood Impreg BP019
A series of FREE Mini Guides for boating projects that run through the basic steps for the practical boat owner. This Mini Guide concentrates on repairing wooden masts, following the steps of scraping, sanding, protecting and varnishing.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Projects &
Solutions SHERIDAN MARINEBy River, By Road, By Mail...
Order the Solutions
01491 652 085
Mast VarnishingPreparingCarefully remove the mast, scrape & sand the old varnish off and sand the mahogany to a smooth, warm brown finish.
RepairingIf the cross member has detached you will need to reattach this as well as you can. Wooden wedges and adhesive can help.
Unfortunately it is not always possible to fix this economically with long lasting effect. A new mast is the better option here.
Wet or Dry Sand Paper - CM864
Scraper - CM9114
ProtectingProtecting the warm brown mahogany wood is key.
Apply coats of Wood Impreg to the bare wood so that this varnish soaks deep into the wood grain.
Wood ImpregBP019
Projects &
Solutions SHERIDAN MARINEBy River, By Road, By Mail...
Order the Solutions
01491 652 085
New Mahogany Masts
F22 MastWP001C
Mast Varnishing
Hand made in England
VarnishingApply an 80% Varnish and 20% Thinners coat followed by two to three coats of straight Varnish for a long lasting, durable and glossy coat.Varnish
BP010A
New FittingsWhy not take the opportunity to fit a new Mast Light and a new Deck Plug and socket.