Top Banner
Project 3: Energy BY: MARTA DÍAZ-HEREDERO, SARAI DE LA ROSA, MARINA VEGA AND SERGIO VICENTE
57
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Project3

Project 3: Energy

BY: MARTA DÍAZ-HEREDERO, SARAI DE LA ROSA, MARINA VEGA AND SERGIO VICENTE

Page 2: Project3

Energy

Kinetic energy Gravitational potential energy

Thermal or caloric energy Chemical energy

Electric energy Light energy Sound energy

Energy is understood as a capacity to do something:

Page 3: Project3

Kinetic energy Energy produced by the movement of an object. Depends on the force applied to the object and on its mass. Measured in Joules (J) More force= higher speed= more kinetic energy Can be transformed into other forms of energy

Newton´s cradle

K. E Formula

Page 4: Project3

Gravitational potential energy Energy related with the height of an object above the ground.

It depends on its mass and the distance between the object and the ground.

Measured in Joules (J)

More altitude= more speed=

more G.P.E

G.P.E FormulaDam waterfall

Page 5: Project3

Thermal or caloric energy Energy related with the movement and temperature of the object. (Heat

energy)

Increase on temperature= higher speed (atoms)= T.E

Can be trasmited by radiation,

conduction or convection.

Can be transformed into other

types of energy

-mechanical energy

-electric energy

Measured in Joules (J)House heated with solar energy

Page 6: Project3

Chemical energy Energy related with the chemical composition of the object.

It is released in a chemical reaction and transformed into other types of energy: - Light energy - Heat energy - Electric energy Measured in Calories or Joules.

Page 7: Project3

Electric energy Energy carried by the electrons in an electric conductor. It is easy to transmit and use and measured in Watt (W) or Joules. Atoms contain some electrons, their movement causes electricity. It is normally the result of another kind of energy.

Page 8: Project3

Light energy It is the potencial of light to perform work. We obtain it from the sun (electromagnetic radiation) and it travels by waves. It can be converted into other types of energy:

-Heat energy

-Electric energy We can measure this waves and

their visible light with the

Electromagnetic Spectrum.

Page 9: Project3

Sound energy The movement of energy through substances in longitudinal waves by a medium (Never Vacuum)

Depends on the pressure and intensity.

-Can damage our ears

-Can break glass

It is produced when a force causes an object or substance to vibrate.

Normally it has less power other forms of energy.

Measured in Pascals or decivels.

Page 10: Project3

General classification of energy sources

Primary energy sources: Found in nature;

Secondary energy sources:

Not found in nature (produced using primary sources)

Sources from which energy can be obtained

Page 11: Project3

Renewable energy sources

Advantages Are unlimited.

Can be replaced.

Develop industry and economy of the region they are installed in.

Not pollute the enviroment.

Disadvantages High cost (no profitability)

Availability.

Sources of energy that are UNLIMITED and can be replaced and used more and once.

Page 12: Project3

Non-renewable energy sourcesSources of energy that are stored in nature during million years

and cannot be replaced once they are used.Advantages

Continuous production of abundant energy.

Easy to use.

Low cost.

No emissions of greenhouse gases during operation.

Disadvantages Are limited

Generation of harmful radioactive waste.

Pollute the enviroment.

Serious environmental disaster in case of accident.

Page 13: Project3

Non-renewable energy sources We obtain fossil fuels from nature: coal, petroleum and gas.

Petroleum Coal Gas

Page 14: Project3

Non-renewable energy sources We use them for:

-Making steal and fuel.

-Making gasoline for powering machines.

-Generating electricity.

-For making a lot of products such as plastics, medicines, cosmetics, synthetic fabrics, and lubricants.

Page 15: Project3

Nuclear energy Nuclear Energy is used for obtaining electricity, by releasing in two ways:

-Nuclear fusion: When atoms are combined for forming a bigger one.

-Nuclear fission: When the atoms are separated.

Page 16: Project3

Transformation of thermal energy into mechanical

The transformation consists of changing one type of energy into another.

For example in machines like the steam engine:

-The chemical energy inside the coal is heated so it is thermal energy.

-Is transformed into mechanical energy by heating the water transforming it into steam so that it expands and makes force moving the piston that makes the wheels move.

Page 17: Project3
Page 18: Project3

Steam Turbine Or the steam turbine, which work in a similar way:

-The chemical energy inside the coal is heated so it is thermal energy.

-Then the steam expands and makes the turbine move.

Page 19: Project3

Internal Combstion Engine In the internal combustion engine is a group of pistons and valves. It works like this:

-First, the mixture of air goes in trough the fist vale.

-Then, it is compress by the piston.

-Later it is light up by a spark so the piston goes down by the force of the combustion.

-Finally, the gases are expelled through the second valve.

Page 20: Project3
Page 21: Project3

Renewable Energy Sources Rate of consumption lower than rate of production

Water and wind used by humans for thousands of years

Wheat grounded by mills powered by river currents and wind

Wind powered sailboats across seas and oceans

Page 22: Project3

Solar Energy Sun is the most abundant renewable energy source

Point of origin of energy in sources such as winds, waves, firewood…

Sun produces more energy that the one we consume

Page 23: Project3

Solar Thermal Power The energy of sunlight produces heat

Hot water for domestic use

1.- Cold water enters the collector

2.- Solar radiation from the panel heats it

3.- Cold water goes through the collector and goes out hot

4.- This hot water is stored in a thermal insulated tank.

Page 24: Project3

Solar Thermal Power Sun is highest in the sky in the equator so at higher latitudes collectors have to be more inclined

In winter, the sun is lower in the sky than in summer and collectors have to be even more inclined

Page 25: Project3

Solar Photovoltaic Power Directly transforming the energy of the Sun into electricity

This can be done with photovoltaic cells

They are to generate an electric current with sunlight

This process is called the photovoltaic effect

Page 26: Project3

Solar Photovoltaic Power Photovoltaic cells are put together forming photovoltaic panels

Photovoltaic panels are connected together to get the energy

Large installations with many Megawatts are called solar farms

Page 27: Project3

Solar Photovoltaic Power If the energy is stored in batteries is an Isolated Solar Installations

If it is used in the moment is a Grid Connected Solar Installations

Page 28: Project3

Grid Connected Solar Installation 1. Solar radiation hits the panels and forms a continuous electric current

2. The inverter transforms the current into an alternating current so it can be used by the electrical grid of the building

3.Protection switchboard regulates the exchange of energy

Page 29: Project3

Isolated Solar Installation 1. Solar radiation hits the panels and forms a continuous electrical current

2. The regulator detects if there is a need for electricity in the building and if yes, it sends the electrical current to the inverter, if not the current is stored in the batteries

3. Batteries store electrical energy so that it can be used when there is no sunlight

4. The inverter transforms the current into an alternating current so it is used by the electrical grid of the building

Page 30: Project3

Solar Thermal Energy Production of electricity similarly to thermal power plants

Difference: steam is produced by the sun’s heat

A lot of water is needed to produce steam to move the turbine so solar radiation has to be very concentrated

This is achieved with mirrors that direct the rays of sun to the top of a tower

Page 31: Project3

Wind Power Wind energy was used for windmills and boats

Nowadays most of its production is for electricity

The wind kinetic energy is transformed to electricity by wind turbines

Page 32: Project3

Wind Turbines Turbines produce many megawatts of electricity

They are in 80m towers with a generator and three 40m rotor blades

Constant blow of wind

Speed of the wind over 6 m/s

Page 33: Project3

Wind Turbines 1. The base supports the weight and stabilises the wind turbine

2. The tower supports the generator and the rotor blades at the optimum height

3. The generator transforms the rotational energy into electric energy

4. The rotation of the blades makes an axis turn inside the generator

Page 34: Project3

Wind Turbines 5. The multiplier gears makes the speed to be 6 times faster

6. The generator produces an electrical current from the rotation that travels down a wire

7. A transformer makes the current able to flow to the electrical grid

Page 35: Project3

Wind Turbines

Large groups of wind turbines are called wind farms Located in plains, peaks of mountains or near the sea

Page 36: Project3

Wind Turbines

It affects bird population and alters the landscape Wind turbines in the sea are offshore wind farms

Page 37: Project3

Biomass Used for the production of thermal and kinetic energy

Agricultural waste: Slurry and crop remains of livestock and farming

Forest waste: Tree prunings and fallen branches

Energy crops: Crops grown for energy production

Urban waste: Organic waste from homes, restaurants…

Page 38: Project3

Biomass The sources have to be converted into appropriate materials

These final products are used as fuels in thermal power plants

Page 39: Project3

Geothermal Energy The heat of the mantle is noticed by making a hole in the ground

This is because it is very near the mantle tre of over 3500º C

In this way we can take advantage of this heat

Page 40: Project3

Geothermal Energy Using it to heat water and produce steam to move a turbine connected to an alternator, with the purpose of generating electricity in geothermal power plants

The heat is also used to directly heat water in central heating systems

Page 41: Project3

Geothermal Energy 1. Water flows through a pipe inside the hot earth

2. And it transforms into steam

3. Which makes the turbine move

4. That moves the generator which produces an electric current

5. The transformer adapts the generated current to the electrical grid

6. The steam cools down in the condenser and returns to liquid state

7. Liquid water cools down in the refrigerator tower

Page 42: Project3

Tidal Power The tides are how the waves are six hours nearer the coast and other six further away

It is caused by the attraction the moon exerts in the oceans and seas of the earth

Page 43: Project3

Tidal Power There is a potential energy created by the highest tides at the highest point of it

We can use this potential energy to produce electric energy as in hydroelectric power plants

Page 44: Project3

Tidal Power 1. When the tide rises the water enter the dike

2. At the highest point of the tide the dike is closed

3. When the tide is in the lowest point, water accumulated is released into the turbines

4. The speed of the water makes the turbines turn and this generates an electric current

Page 45: Project3

Wave Energy The waves break against the coast

At any point of the sea or ocean hundreds of waves are passing over every day

We can harness this energy in the coasts where the waves are stronger

Page 46: Project3

Wave Energy 1. Wave enter the air chamber

2. When the water level rises, air is pushed upwards and through a turbine, making it turn

3. When the wave falls the water level is reduced and the air chamber fills with air again

Page 47: Project3

Electrical energy:

Known as the energy that has the electric current. It is the flow of electrons. 

• Nuclear power plants

• Hydroelectric power plants

• Thermal power plants

Page 48: Project3

Nuclear power plants Generation:

◦ Radioactive materials. (Residues of oil,coal..).

Transmission:◦ By an electrical grid. (Network which gives nergy).

Distribution: ◦ By conductive wires.

Page 49: Project3

Nuclear power plants

Page 50: Project3

Hydroelectric power plants Generation:

By the speed of water flow.(Niagara falls).

Transmission:Energy of the sun which moves the turbines and the generators.

Distribution: The water is passed through the gate which take the water to the turbines which convert potential energy into mechanical energy, these gates are called penstocks.

Page 51: Project3

Hydroelectric power plants

PENTSOCK

Page 52: Project3

Thermal power plants Generation:

◦ From the burning of certain materials , or the heating of water.

Transmission:◦ By transmission lines

Page 53: Project3

Thermal power plants Distribution:

Page 54: Project3

Energy and the environment There are two types of energy:

◦ Renewable and non-renewable.

Energy(power plants) are causing an impact in global warming.

Page 55: Project3

Energy saving and efficiencyNowadays energy is based on fossil fuels and nuclear energy.

◦ This provoke POLLUTION

◦ Save: Don´t use energy we don´t need. Turn lights off.

◦ Efficiency: Using low consuming light bulbs is an example which will save money .

This will make . the global warming and pollution to decrease , and you´ll save MONEY¡

Page 56: Project3

Enviromental impact Generation of energy:

◦ Is high because people use electrical energy in their daily lifes and it pollutes

Transmission of energy:

◦ It Might be caused by oil,coal and wind.

Distribution of energy:

◦ The distribution of energy is one of the key components of infastructure , but it can damage the enviroment.

Page 57: Project3

Enviromental impact

Use of energy:

The environmental impact is very high because we use much more than the energy we would need.