TRUETEMPER.COM [email protected] TRIM GUIDE PROJECT X SPECIFICATIONS PARALLEL IRONS R+ (5.5) 0.370” 0.600” 41.0” 115 S (6.0) 0.370” 0.600” 41.0” 120 X (6.5) 0.370” 0.600” 41.0” 125 PROJECT X FLEX TIP DIAMETER BUTT DIAMETER LENGTH WEIGHT (g) TAPERED IRONS R (5.0) 0.355” 0.600” 41.5”-37.0” 110 R+ (5.5) 0.355” 0.600” 41.5”-37.0” 115 X (6.5) 0.355” 0.600” 41.5”-37.0” 125 S (6.0) 0.355” 0.600” 41.5”-37.0” 120 TRIMMING Please remember the following are general rules for assembling your clubs: • Taper tip shafts should never be tip trimmed because they are designed to discrete lenghts. Butt trim taper tip shafts to finished length. • Butt trim shafts to finished length after tip trimming unless specified. PROJECT X Trim Guide 3-IRON 1.0” 2-IRON 0.5” 1-IRON 0” 4-IRON 1.5” 5-IRON 2.0” 6-IRON 2.5” 7-IRON 3.0” 8-IRON 3.5” 9-IRON 4.0” PW 4.5” Weight Tour Trajectory Low Spin Low X+ (7.0) 0.355” 0.600” 41.5”-37.0” 130 Weight Tour Trajectory Low Spin Low