14 17 2010 04 23 Journal of Clinical Rehabilitative Tissue Engineering Research April 23, 2010 Vol.14, No.17 ISSN 1673-8225 CN 21-1539/R CODEN: ZLKHAH 3065 Department of Stomatology, Qingdao First Sanitarium of Jinan Military Area Command of Chinese PLA, Qingdao 266071, China Qiu Min , Doctor, Attending physician, Department of Stomatology, Qingdao First Sanitarium of Jinan Military Area Command of Chinese PLA, Qingdao 266071, China fremancn@ gmail.com Received: 2010-02-22 Accepted: 2010-03-26 266071 1974 2007 fremancn@ gmail.com :R318 :A :1673-8225 (2010)17-03065-04 2010-02-22 2010-03-26 (20091109008/ G•Z) Programming of alveoli-implant finite elemental modeling software Qiu Min, Wei Ning-mei, Wang Ji-ling, Ding Hong Abstract BACKGROUND: The finite element method has been wildly used in stomatology, but, the modeling methods and models were different and lack of standard. There is not biomechanical analysis software which specialized indental implantology. OBJECTIVE: To compile software that can generate alveoli-implant complex finite element models. METHODS: Based on PC, CAD, finite element analysis, database and electronic table software, software that includes the functions of modeling, database and assembles was programmed using Visual Basic for Application programming language. RESULTS AND CONCLUSION: Various kinds of alveoli-implant models could obtain though the software. A software package that can generate alveoli-implant finite element models rapidly and automatically could be compiled with the complex of AutoDesk Mechanical Desktop 2009DX, ANSYS Workbench 10.1 and Visual Basic for Application. Qiu M, Wei NM, Wang JL, Ding H.Programming of alveoli-implant finite elemental modeling software. Zhongguo Zuzhi Gongcheng Yanjiu yu Linchuang Kangfu. 2010;14(17): 3065-3068. [http://www.crter.cn http://en.zglckf.com] Visual Basic for Application AutoDesk Mechanical Desktop 2009DX ANSYS Workbench 10.1 Visual Basic for Application doi:10.3969/j.issn.1673-8225.2010.17.007 . [J]. 2010 14(17):3065-3068. [http://www.crter.org http://cn.zglckf.com] 0 [1-2] [3-4] ( ) [5] [6-7] [8-10] ( ) ( ) ( ) AutoDesk Mechanical Desktop 2009DX Visual basic for application [11-13]
4
Embed
Programming of alveoli-implant finite elemental modeling ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
中国组织工程研究与临床康复 第 14卷 第 17期 2010–04–23出版 Journal of Clinical Rehabilitative Tissue Engineering Research April 23, 2010 Vol.14, No.17
ISSN 1673-8225 CN 21-1539/R CODEN: ZLKHAH 3065
Department of Stomatology, Qingdao First Sanitarium of Jinan Military Area Command of Chinese PLA, Qingdao 266071, China Qiu Min☆, Doctor, Attending physician, Department of Stomatology, Qingdao First Sanitarium of Jinan Military Area Command of Chinese PLA, Qingdao 266071, China fremancn@ gmail.com Received: 2010-02-22 Accepted: 2010-03-26 解放军济南军区青岛第一疗养院口腔科,山东省青岛市 266071 仇 敏☆,男,1974 年生,山东省青岛市人,汉族,2007 年解放军第四军医大学毕业,博士,主治医师,主要从事口腔种植与牵张成骨研究。 fremancn@ gmail.com 中图分类号:R318 文献标识码:A 文章编号:1673-8225 (2010)17-03065-04 收稿日期:2010-02-22 修回日期:2010-03-26 (20091109008/ G•Z)
骨种植体复合体有限元建模软件的编制☆ 仇 敏,魏宁梅,王继玲,丁 红
Programming of alveoli-implant finite elemental modeling software
Qiu Min, Wei Ning-mei, Wang Ji-ling, Ding Hong
Abstract BACKGROUND: The finite element method has been wildly used in stomatology, but, the modeling methods and models were different and lack of standard. There is not biomechanical analysis software which specialized indental implantology. OBJECTIVE: To compile software that can generate alveoli-implant complex finite element models. METHODS: Based on PC, CAD, finite element analysis, database and electronic table software, software that includes the functions of modeling, database and assembles was programmed using Visual Basic for Application programming language. RESULTS AND CONCLUSION: Various kinds of alveoli-implant models could obtain though the software. A software package that can generate alveoli-implant finite element models rapidly and automatically could be compiled with the complex of AutoDesk Mechanical Desktop 2009DX, ANSYS Workbench 10.1 and Visual Basic for Application. Qiu M, Wei NM, Wang JL, Ding H.Programming of alveoli-implant finite elemental modeling software. Zhongguo Zuzhi Gongcheng Yanjiu yu Linchuang Kangfu. 2010;14(17): 3065-3068. [http://www.crter.cn http://en.zglckf.com]
UCS坐标系建立三维模型。操作过程中主要使用了Autodesk BrepAuto 2.0 Type Library 、 Autodesk GeAuto 2.0 Type Library、Autodesk McadAuto 2.0 Type Library和Autodesk SymBBAuto 2.0 Type Library四个类型库
结论:通过AutoDesk Mechanical Desktop 2009 DX和Visual Basic for Application语言向结合的方法,可以编制出能够快速、自动生成后续实验所需模型的软件
包,进而可以做到高效、快捷地获得外形逼真、网格适
当、能够从力学上代表实物的牙槽嵴-种植体(牵张器)三维有限元模型
[20-23]。
4 参考文献 [1] Ley J, Cranin AN. Distraction osteogenesis for augmenting the
deficient alveolar ridge in preparation for dental implant placement: a case report. J Oral Implantol. 2004;30(1):14-22.
[2] Thor A, Sennerby L, Hirsch JM, et al. Bone formation at the maxillary sinus floor following simultaneous elevation of the mucosal lining and implant installation without graft material: an evaluation of 20 patients treated with 44 Astra Tech implants. J Oral Maxillofac Surg. 2007; 65(7 Suppl 1):64-72.
[3] Yu W, Jang YJ, Kyung HM. Combined influence of implant diameter and alveolar ridge width on crestal bone stress: a quantitative approach. Int J Oral Maxillofac Implants. 2009;24(1):88-95.
[4] Rubo JH, Souza EA. Finite element analysis of stress in bone adjacent to dental implants. J Oral Implantol. 2008;34(5):248-255.
[5] Wolvius EB, Scholtemeijer M, Weijland M,et al. Complications and relapse in alveolar distraction osteogenesis in partially dentulous patients. Int J Oral Maxillofac Surg. 2007;36(8):700-705.
[6] Kao HC, Gung YW, Chung TF, et al. The influence of abutment angulation on micromotion level for immediately loaded dental implants: a 3-D finite element analysis. Int J Oral Maxillofac Implants. 2008;23(4):623-630.
[7] Chaichanasiri E, Nanakorn P, Tharanon W, et al. Finite element analysis of bone around a dental implant supporting a crown with a premature contact. J Med Assoc Thai. 2009;92(10):1336-1344.
[8] Schrotenboer J, Tsao YP, Kinariwala V, et al. Effect of platform switching on implant crest bone stress: a finite element analysis. Implant Dent. 2009;18(3):260-269.
[9] Yang J, Xiang HJ. A three-dimensional finite element study on the biomechanical behavior of an FGBM dental implant in surrounding bone. J Biomech. 2007;40(11):2377-2385.
[10] Baggi L, Cappelloni I, Di Girolamo M,et al. The influence of implant diameter and length on stress distribution of osseointegrated implants related to crestal bone geometry: a three-dimensional finite element analysis. J Prosthet Dent.2008;100(6):422-431.
[11] Zhang F. Beijing:Tsinghua University Press.2006:210-250. 张帆. Autocad VBA 二次开发[M].北京:清华大学出版社,2006: 210-250.
[12] Daas M, Dubois G, Bonnet AS, et al. A complete finite element model of a mandibular implant-retained overdenture with two implants: comparison between rigid and resilient attachment configurations. Med Eng Phys. 2008;30(2):218-225.
[13] Gladilin E, Ivanov A. Computational modelling and optimisation of soft tissue outcome in cranio-maxillofacial surgery planning. Comput Methods Biomech Biomed Engin. 2009;12(3):305-318.
[15] Steven Jordan. Beijing:Publishing House of Electronics Industry. 2005:456-583. Steven Jordan. Visual basic6 编程宝典[M]. 北京:电子工业出版社, 2005:456-583
[16] Liao SH, Tong RF, Dong JX. Influence of anisotropy on peri-implant stress and strain in complete mandible model from CT. Comput Med Imaging Graph. 2008;32(1):53-60.
[17] Jaecques SV, Van Oosterwyck H, Muraru L, et al. Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone. Biomaterials. 2004; 25(9):1683-96.
[18] Bevilacqua M, Tealdo T, Pera F, et al. Three-dimensional finite element analysis of load transmission using different implant inclinations and cantilever lengths. Int J Prosthodont. 2008;21(6): 539-542.
[19] Stahl E, Keilig L, Abdelgader I, et al. Numerical analyses of biomechanical behavior of various orthodontic anchorage implants. J Orofac Orthop. 2009;70(2):115-127.
[20] Geris L, Vandamme K, Naert I,et al. Numerical simulation of bone regeneration in a bone chamber. J Dent Res. 2009;88(2):158-163.
[21] Cruz M, Wassall T, Toledo EM, et al. Finite element stress analysis of dental prostheses supported by straight and angled implants. Int J Oral Maxillofac Implants. 2009;24(3):391-403.
[22] Boccaccio A, Pappalettere C, Kelly DJ. The influence of expansion rates on mandibular distraction osteogenesis: a computational analysis. Ann Biomed Eng. 2007;35(11):1940-1960.
[23] Veziroglu F, Yilmaz D. Biomechanical evaluation of the consolidation period of alveolar distraction osteogenesis with three-dimensional finite element analysis. Int J Oral Maxillofac Surg. 2008;37(5): 448-452.