Programme Schedule HEMSI High Energy Materials Society of ...hemsichd.org/pdf/brochure exp wrkng of metals.pdf · High Energy Materials Society of India 03 ... Yashpal Singh Scientist

ExploWork-2014National Workshop

on

High Energy Materials Society of

India

03 - 04 April 2014

Organizing

(Chandigarh-Delhi Chapter)D FOYR ET FS EI NNI C

M E

In association withTerminal Ballistics Research Laboratory

Chandigarh

• BARC , ISRO , CSIR , DRDO laboratories• IITs • Ordnance factories • Annamalai University,Tamil Nadu • Panjab University , PEC University of Technology Chandigarh,• Thapar University , Patiala • Solar Explosive, Nagpur• Premium Explosives Ltd, Secunderabad• Girdhari Explosive, Secunderabad

HEMSI President HEMSI

Chairman

Vice Chairman

Secretary

Chairman

Co-Convenor

Members

Dr. B. Bhattacharya OS & Director HEMRL Pune Ph. 020-25869230

Dr Satish Kumar DS & Director DRDO HQ , New Delhi Ph : 011-26154341

Mr Rajeev Narang Scientist ‘G’ CFEES, Delhi Ph: 011-23907275

Dr. P. K. Soni Scientist ‘E’ TBRL , Chandigarh Ph: 09417936461

Arun Agarwal Scientist ‘F’ Ph : 09463100775

Niraj Srivastava Scientist ’E’ Ph : 09417513487

• J P Kamal , Sc ‘F’ • Shallu Gupta , Sc ‘D’ • Sandeep Kumar, Sc ‘D • Rajeev Kumar , Sc ‘D’• Deepak Kanojia , Sc ‘D’• Abhishek Upadhyay,Sc ‘C’• Dr. Diva , Sc ‘C’• Sh Nagesh Sudan , Sr Account Officer• Sh Sanjay Walia , TO ’C’

HEMSI Chandigarh – Delhi Chapter

Workshop Organizing Committee

Venue :Manthan Auditorium ,

Terminal Ballistics Research LaboratoryRamgarh Range , Distt Panchkula , Haryana , INDIA

Participating Organizations

Programme Schedule

Time0945 -1015

1015 -1030

1030 -1115

1115 -1130

1130 -1215

1215 -1300

1345 -1430

1430 -1515

1515 -1600

1600 -16151615 -1715

1000 -1045

1045 -1130

1145 -1230

DAY 1Registration

Inauguration and welcome address byVice-Chairman HEMSI local chapter,Dr Manjit Singh, OS & Director TBRL

Key Note address by Prof KazuyukiHukamoto,Kumamoto University, Japan

High Tea

‘Explosive working of metals in the field ofarmaments and industrial applications’ bySh TK Raychaudhuri, Sc‘G’(Retd),TBRL Chandigarh

1300 -1345

Lunch

Tea

Tea

‘Simulation & deformation behaviour of materialsubjected to underwater impulse loading ‘ by DrVasant Matsagar & Dr Tanushree Chakraborty,Associate Professors , IIT Delhi

DAY 2Time

‘Explosive consolidation of composite material ‘by Dr K Sivakumar , Sc ‘G’, DMRL Hyderabad

‘Theoretical and experimental design ofexplosive welding process’ byDr Pal Dinesh Kumar , Sc ‘F’ , TBRL

‘Explosive Metal Forming – A Review’ byDr K Raghukandan , Annamalai University,Tamil Nadu

'Explosive welding; mainly using underwatershock wave’ by Prof K Hukamoto,Kumamoto University, Japan

Live demo of explosive welding trial

‘

‘

Dissimilar metal joints for critical spaceapplications’ by Dr Bhanu Pant, VSSC(ISRO) and Processing and characterizationof qualified explosive bonded joints for spaceprogramme.’ by Mr Pravin Muneshwar,VSSC(ISRO), Trivandrum

‘Thermal kinetics of explosion welding’by Dr S Sarvanan , Annamalai University

1130 -1145

‘Explosive powder compaction’ by Prof KHukamoto, Kumamoto University, Japan

1230 -1315

1315 -1400 ‘Qualification tests for explosion bondedplates under nuclear environment ’ byDr Pradip Mukherjee, BARCLunch1400 -1430

1430 -1515 Shock synthesis : exploring new materials’ byProf K Hukamoto,Kumamoto University, Japan

1515 -1530 Tea1530 -1615 ‘Bulge Testing ‘ by Sh B Basu , Sc ‘F’ NMRL

1615 -1700 Panel Discussion

Contact details :Fax : +91-172 -2657506 ,

Ph : +91 -1733 – 307166 ,307167Email:Website : www.hemsichd.org

[email protected]

General Secretary

Vice-Chairman

Acting Treasurer

Joint Secretary

Convenor

Accommodation

Transportation

Dr. Seema KakadeScientist ‘G’HEMRL PunePh. 020-25869293

Dr Manjit SinghOS & DirectorTBRL,ChandigarhPh : 0172-2657674

Rajwant RaiScientist ‘D’TBRL, ChandigarhPh: 08146258855

IPS SandhuScientist ‘D’TBRL, ChandigarhPh: 09914212403

Dr Pal Dinesh KumarScientist ’F’Ph : 09417850659

Anil KhuranaEstate ManagerScientist ’F’Ph: 0172-2638001,M: 08725000701

Yashpal SinghScientist ’E’Ph: 09417528390

High Energy Materials Society of India (HEMSI) was founded in the year 1983 to provide a forum for interaction among the scientists and researchers working in the field of high energy materials and related technologies in research laboratories of DRDO, DAE, ISRO, Academic institutions and industries of the country. HEMSI having made a modest beginning at Pune, now boasts of having five more Chapters at Thiruvanathapuram, Chennai, Hyderabad, Chandigarh-Delhi and Jagdalpur in addition to its parent chapter at Pune.

HEMSI made its presence felt throughout the country and the world over by arranging 8 National and 7 International seminars and conferences. Deliberations in the conferences always lead to the generation of road map for future work in the field of pyrotechnics, propellants, high explosives and related fields. It is endeavor of the society to bridge the technology gap between the developed countries and India through participation of the international scientists and experts in the said conferences.

Dr Satish Kumar , DS & Director , DRDO HQ and Chairman HEMSI Chandigarh-Delhi chapter inaugurating Workshop on ‘Disposals of Ammunition and Energetic material ’ : 06-07 June 2013 at TBRL Chandigarh

HEMSI

TBRL was established in 1961 as one of armament research laboratories, under the Department of Defence Research & Development with an aim to provide facilities for applied research and technology development in the fields of high explosive processing, detonics and shock performance evaluation of warheads & other armament systems.

The laboratory has its headquarter at sector 30, Chandigarh and technical area known as TBRL Range, spread over 5000 acres at village Ramgarh, District Panchkula, Haryana. TBRL Ranges are divided into a number of technical zones / trial areas which have been so designed and spaced as to allow conduct of experimental trials independent of each other.

Products of Explosive Welding/Forming

The endeavor of this workshop is to get an insight into the explosive working of metals which consists of contact processes such as explosive welding, cutting, powder consolidation, engraving and stand-off processes like explosive metal forming, sheet and tube forming, bulging etc.

The workshops aims to share the basic ideas, theories, methodologies and experimental findings regarding explosive working of metals. Other related areas such as explosives types, diagnostic techniques, post welding characterization methods will also be deliberated in detail. This workshop will provide a platform for scientists and researchers working in these areas to share, learn and disseminate their experience and knowledge through presentations & demonstration.

u Explosive metal working applications u Explosive welding u Explosive shock consolidation u Explosive metal forming u Low VOD explosivesu Modeling and simulationu Diagnostic techniquesu Post characterization techniques u Automation of explosive working of metals

Recent Events

• Special lecture series by Prof. Dr. Thomas M. Klapötke, Ludwig-Maximilian University of Munich, Germany on

th 11 Feb 2014 at TBRL Chandigarh. th• 9 International Conference on High Energy Materials

and Exhibit (HEMCE-2014) 13-15 Feb 2014, VSSC, Trivandrum

Terminal Ballistics Research Laboratory

His Excellency Shri Shiv Raj V. Patil , Governor of Punjab &thAdministrator U.T. Chandigarh inaugurating 8 International

high energy materials conference & exhibits (HEMCE –2011) 10-12 November 2011 at TBRL Chandigarh

Delegate Registration

Workshop Proceedings

Advertisement rates:

Guidelines for advertisement material:

Payment Details

Online Payment

Sponsorship

Objective of Workshop

Thrust Areas

u Delegates from Scientific org. /Industries : Rs 2000/- u HEMSI members/ Academic Institutions : Rs 1000/- u Students : Rs 500/-

Workshop proceedings will be released during the workshop. Institutes and industries are invited to advertise their products /services and give impetus to the workshop. The proceedings will be distributed to all delegates. The proceedings will consist of recent activities and achievements of Chandigarh-Delhi chapter of HEMSI , forthcoming events , lecture notes of workshops , advertisements. Lectures are invited from delegates for printing in the proceedings.

u Small size Colour (3.5” x 2” ) : Rs 5,000/-u Half Page Colour : Rs 15,000/- u Full Page Colour : Rs 20,000/-

u Photographs resolution (300 to 600 dpi)u Hardcopy of advertisement material should be provided along with soft copy as *.doc /*.ppt/*.cdr file(Coraldraw Format will be preferred)

Demand Draft (DD)/Cheque Payment DD/Cheque Number ___________ Amount _______Dated in favour of

Deposit directly in current account number of “ HEM Society of India (Chandigarh-Delhi Chapter)” with State Bank of India , Sector-30 D, Chandigarh-160 030 (IFSC code: SBIN0001443).

Request for Sponsorship /delegate registration along with DD/Cheque/Online transaction slip should be addressed to

Fax: +91-172-2657506 , email : [email protected]

“HEM Society of India (Chandigarh-Delhi Chapter)”

30353509580

The Chairman, National Workshop on “Explosive Working of Metals”,

TBRL, Sec 30 D , Chandigarh-160 030.

Cu Armour Bulge tested SS plate Explosive welded Al & SS

Heat exchanger Tubular joints