SOLO Swiss Group www.soloswiss.com SOLO Profitherm Furnace - Technical Presentation • Basic description of the elements • Process management • Lay-out, modularity • Visualisation - supervision - EASYTHERM • Major advantages for your benefit SCOPE OF THE PRESENTATION
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
• Basic description of the elements
• Process management
• Lay-out, modularity
• Visualisation - supervision -EASYTHERM
• Major advantages for your benefit
SCOPE OF THE PRESENTATION
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
BASIC DESCRIPTION OF THE ELEMENTSfurnace - quench tank association
• Direct transfer from the furnace into the quench tank• no heat loss (charge is fully located in the heated zone)• Furnace is immediately available for the next load• many combinations possible
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
Increase production by adding one furnace
• Many possibility to combine furnaces and quench tanks• Additional elements may be included anytime
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
I. The furnace loading sequence
full or semi-automatic handling
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
II. The quenching sequence
fully automatic
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
III. The bath unloading & furnace reloading sequence
full or semi-automatic
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
BASIC DESCRIPTION OF THE ELEMENTSthe bell-type furnace 11Cg
• inert metallic retort
• forced convectionsystem (turbine)
• temperature control over 6 Tc
• Integrated cooling fan
• circular heating system
• up to 1120°C
• all carburising, austenitisation and nitriding based processes
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
BASIC DESCRIPTION OF THE ELEMENTSthe bell-type furnace 11Cg gas-heated
• inert metallic retort
• forced convectionsystem (turbine)
• temperature control over 6 Tc
• Integrated cooling down devices
• 3 burners with heat-exchanger
• up to 1120°C
• all carburising, austenitisation and nitriding based processes
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
BASIC DESCRIPTION OF THE ELEMENTScooling/quenching tanks (oil or water)
• ratio liquid/charge > 10
• forced convectionsystem (turbine) with variable flow rates
• heat exchanger
• integrated external lift
• door and N2 protection
• up to 200°C
SOLO Swiss Group www.soloswiss.com
SOLO Profitherm Furnace - Technical Presentation
BASIC DESCRIPTION OF THE ELEMENTScooling/quenching tanks (oil or water)