-
PROFILE PROJECTORS
PROFILE PROJECTORS
V-24B
V-20B
V-12B
Glass Reading ScaleUsed to measure projection images on the
screen.200mm and 300mm scales---both in 0.5mm increments---are
available.Accuracy: –(15+L/20) m
Auxiliary Oblique Halogen Surface IlluminatorThis 24V-150W
halogen illuminator is used to illuminate workpieces having low
surface reflectivity such as printed matter, cloth, or leather.
Glass Scale SetUsed to check the magnifying accuracy of the
projector being used. It is equipped with a 50mm standard scale in
1mm increments(accuracy –[3+7L/100] m), a 300mm reading scale in
0.1mm increments(accuracy – [6+L/50] m), and a 6x magnifier.
*L=measurement length
Chart Clip Type LLUsed to measure charts on the screen. Comes
standard with all projectors except the V-12B.
Accessory CabinetUsed to store accessories.Measures (W x D x H):
450 x 600 x 740mm(17.7 x 23.6 x 29.1 in.)
Projector Table BAccessory Cabinet comes with a side wing for a
data processor.Same dimensions as Accessory Cabinet when the wing
is closed. 900mm (W) (35.4 in.) when the wing is set.
For the V-12B For the V-12B
Green Filter, ND Filter, DIA Adapter AThe green filter is used
for black- and-white photography or for viewing edges of a
workpiece with greater sharpness. The ND filter is used to adjust
brightness. Both filters must be used with the DIA Adapter A.
DIA Adapter A ND Filter Green Filter
Code No. 2CE-IWHH-5Printed in Japan (0803-05) Am/M
NIKON CORPORATION6-3, Nishiohi 1-chome, Shinagawa-ku, Tokyo
140-8601, Japanphone: +81-3-3773-9026 fax:
+81-3-3773-9062http://www.nikon-instruments.jp/eng/
NIKON INSTRUMENTS INC.1300 Walt Whitman Road, Melville, N.Y.
11747-3064, U.S.A.phone: +1-631-547-8500; +1-800-52-NIKON (within
the U.S.A. only)fax:
+1-631-547-0306http://www.nikoninstruments.com/NIKON INSTRUMENTS
EUROPE B.V.Laan van Kronenburg 2, 1183 AS, Amstelveen, The
Netherlandsphone: +31-20-44-96-222 fax: +31-20-44-96-298
http://www.nikoninstruments.eu/NIKON INSTRUMENTS (SHANGHAI) CO.,
LTD.CHINA phone: +86-21-5836-0050 fax: +86-21-5836-0030(Beijing
branch) phone: +86-10-5869-2255 fax: +86-10-5869-2277(Guangzhou
branch) phone: +86-20-3882-0552 fax: +86-20-3882-0580
NIKON SINGAPORE PTE LTD.SINGAPORE phone: +65-6559-3618 fax:
+65-6559-3668NIKON MALAYSIA SDN. BHD.MALAYSIA phone: +60-3-78763887
fax: +60-3-78763387NIKON INSTRUMENTS KOREA CO., LTD.KOREA phone:
+82-2-2186-8410 fax: +82-2-555-4415NIKON CANADA INC.CANADA phone:
+1-905-625-9910 fax: +1-905-625-0103NIKON FRANCE S.A.S.FRANCE
phone: +33-1-45-16-45-16 fax: +33-1-45-16-00-33NIKON GMBHGERMANY
phone: +49-211-9414-0 fax: +49-211-9414-322NIKON INSTRUMENTS
S.p.A.ITALY phone: +39-55-3009601 fax: +39-55-300993NIKON
AGSWITZERLAND phone: +41-43-277-2860 fax: +41-43-277-2861
NIKON UK LTD.UNITED KINGDOM phone: +44-20-8541-4440 fax:
+44-20-8541-4584 NIKON GMBH AUSTRIAAUSTRIA phone: +43-1-972-6111-00
fax: +43-1-972-6111-40NIKON BELUXBELGIUM phone: +32-2-705-56-65
fax: +32-2-726-66-45
Specifications and equipment are subject to change without any
notice or obligation on the part of the manufacturer. March 2008
©2006/2007/2008 NIKON CORPORATIONThe products detailed in the
brochure are controlled by the Japanese Foreign Exchange and
Foreign Trade Law and the International Export Control Regime. If
there is a possibility that they may be utilized for the
development of weapons of mass destruction, etc., they shall not be
exported without authorization from the government.
-
�
� �
�
� �
2 3
PROFILE PROJECTOR
Profile projector with an effective 600mm screen
diameterV-24B
PROJECTION LENSES
BD
A
Profile ProjectorPGA20000
5xPGB20500
10xPGB21000
20xPGB22000
50xPGB25000
100xPGB28100
�
(mm)
SYSTEM DIAGRAM SPECIFICATIONS
610 (24.0)380 (15.0)
108 (4.3)
162
(6.4
)16
0 (6
.3)
130 (5.
1)65
(2.6)
230
(9.1
)38.
1 (1.5)
25 (1.0
) 150
(5.9
)
4 (0.2)
18 (0.7) f7
215 (8.5) (mm/in.)
Center axis of rotationDetachable
4-M 10 (0.4) ; 25 (0.98) depth
Large effective screen diameter of 600mm.Superior magnification
accuracy is ideal for measurement and
inspection of the profiles, surface conditions, and other
aspects of large workpieces.
Large stage mountableA large stage with wide cross-travel can be
mounted.The up/down stage movement is motorized,accommodating
workpieces as tall as 250mm.
Halogen light sourceThe halogen light source provides sufficient
brightness regardless of whether contour or surface illumination is
used, making measurements and observations simple and easy.
Concentric and parfocalProjection lenses from 5x up to 100x have
the same parfocal distance and are all concentric. This simplifies
operations when magnifications must be changed often.
Highest magnification accuracyFeaturing a magnification accuracy
of –0.05% with contour illumination and –0.075% with surface
illumination (0.1% and 0.15% when a 200x lens is used),this
instrument s accuracy is extremely high when compared with other
models.
Lamp Verification Tool*1PAH09100
Data Processing SoftwareE-MAX series
Retrofit Counter/DP UnitEFA50000
V-block FixturePPF00000
2-Axis Counter DisplayEFB50200
Tilting Center FixtureType D2PPG50100
Rotating TableType2
PPE50110
9V StagePPB65100
Shade*1PAH03000
Digital PrinterDPU-414EXK21072
Data ProcessorDP-E1EFB51000
Foot Switch 4EFE00202
Foot Switch 2EFE00200
Standard 300mm ScaleEDW20400
MagnificationVerification ToolPAH02000
Reading Scale with HolderPAH01301
Projection Lenses
Projection Lens 5xBooster Lens Exclusively
for Surface illumination(Comes standard with
5x projection lens)
*1: Standard accessory
V-24B configured with 9V Stage + Retrofit Counter/DP Unit +
2-Axis Counter Display + DP-E1
Dedicated 9V StageSurface areaStage glass sizeCross
travelReading methodMinimum readoutTool mounting grooveLoading
capacityWeight
610 x 290mm (24.0 x 11.4 in.)330 x 200 x 10mm (13.0 x 7.9 x 0.4
in.)225 x 100mm (8.9 x 3.9 in.)Linear encoder (SC-212 is
required.)0.0005mmDovetail30kg (66.1 lb.)Approx. 75kg (165.3
lb.)
Magnification 5x
10x20x50x
100x
Diameter of field of view 120
6030126
Half mirrorDetachableDetachable
Built-in; fixedBuilt-in; switchableBuilt-in; switchable
A 174106
463935
B 2426
---
D 502330113
9981
Five types of projection lenses are available for the V-24B
profile projector, each featuring a different magnification,
working distance, and field of view with a different diameter.
Select the appropriate one to suit your application.
A=working distanceB=working distance when a half reflecting
mirror is attached (5x,10x)D=maximum diameter of a measurable
cylindrical specimen
*Part of the field of view is vignetted when the 9V Stage and a
5x lens are used under contour illumination.
Type
Image
Screen
Lens mount
Projection lens
Magnification accuracy
Light source
Max. workpiece height
Stage
Power input
Dimensions (W x D x H)
Weight
Vertical optical axis
Inverted and reversed
ø600mm (23.6 in.); etched center crossline;
1-minute protractor; inclined 4° off vertical3-lens turret
mount; screw type
5x, 10x, 20x, 50x, 100x
±0.05% for contour illumination±0.075% for surface
illumination24V-150W halogen for both contour and
surface illumination
250mm (9.84 in.)
9V Stage directly mountable
AC 100-120V (CSA), 220-240V (CEE), 240V (SAA)
1,180 x 1,100 x 1,900mm
(46.5 x 43.3 x 74.8 in.)
800kg (1,766 lb.)
CabinetPAH05010
-
PROFILE PROJECTOR
Profile projector with an effective 500mm screen
diameterV-20B
4 5
�
*2
DA
A
A
A *2
B *2
B *2
B
PROJECTION LENSES
Profile ProjectorPFA20000
5xPFB20500
10xAPFB21001
20xPFB22000 50x
PFB25000100xPFB28100
(mm)
SYSTEM DIAGRAM SPECIFICATIONS
Parfocal projection lensesAll projection lenses have the same
parfocal distance and feature long working distances. The built-in
half mirror eliminates the need to adjust illumination each time
the magnification is changed. With improved images with excellent
quality, while enabling observation in a comfortable posture by
adjusting the eye-point height.
Workpieces up to 20kg measurableThe stage up/down movement unit
is rigidly built, and if the 10 x 6 stage is used, workpieces as
heavy as 20kg can be loaded. The measurable range has been
increased to 250 x 150mm.
Lamp Verification Tool*1PAH09100
V-block FixturePPF00000
GoniometerType 2
PPE32100
Rotating Table Type 3PPE42100
Rotating TableType4PPE50110
Tilting Center FixtureType A
PPG40000
Shade*1PAH03000
Digital PrinterDPU-414EXK21072
Foot Switch 4EFE00202
Foot Switch 4*3EFE00202(See page 11)
Standard 300mm ScaleEDW20400
CabinetPAH05010
2 x 2 Stage PPB25100
03L Stage PPB35120
4 x 4 Stage PPB35140
6 x 4 Stage PPB45300
8 x 6 Stage PPB56000
10 x 6 Stage PPB67000
I/O Panel
Stage Adapter SPFH27000
MagnificationVerification ToolPAH02000
Reading Scale with HolderPAH01301
Projection Lenses
*1: Standard accessory *2: Letters above the stages represent
accessories that can be mounted.*3: Please use Foot Switch 2
(EFE00200) for profile projectors that have manufacturer numbers
starting with No. 1 or No. 2.
V-20B configured with 10 x 6 Stage + DP-E1
Magnification 5x
10x20x50x
100x
Diameter of field of view 100
5025105
Half mirrorBuilt-in; fixed
Built-in; switchableBuilt-in; switchableBuilt-in;
switchableBuilt-in; switchable
A 73 79 85 50.550.5
D 149215313130130
Five types of projection lenses are available for the V-20B
profile projector, each featuring a different magnification,
working distance, and field of view with a different diameter.
Select the appropriate one to suit your application.
A=working distanceD=maximum diameter of a measurable cylindrical
specimen
*Part of the field of view is vignetted when the 5x or 10x
projection lens are used under contour illumination.
Type
Image
Screen
Lens mount
Projection lens
Magnification accuracy
Light source
Max. workpiece height
Stage
Power input
Dimensions(W x D x H)
Weight
Vertical optical axis
Inverted and reversed
ø500mm (19.7 in.); protractor screen;
inclined 8°3-lens turret mount; screw type
5x, 10x, 20x, 50x, 100x
±0.1% for contour illumination±0.15% for surface
illumination24V-150W halogen lamp
150mm (5.9 in.)
10 x 6 Stage directly mountable;
8 x 6, 6 x 4, 4 x 4, 03L, 2 x 2 Stage mountable via adapter
AC 100-120V (CSA), 220-240V (CEE), 240V (SAA)
570 x 1,200 x 1,900mm
(22.4 x 47.2 x 74.8 in.)
260kg (573 lb.)
Large effective screen diameter of 500mm.Permits mounting of a
large stage and includes a built-in
digital counter and digital protractor.
Stage Adapter S For the V-20BThis adapter is used to mount a
stage other than the 10 x 6 Stage to the V-20B profile
projector.
Data Processing SoftwareE-MAX series
Retrofit Counter/DP UnitEFA50000
Data ProcessorDP-E1EFB51000
-
6 7
A
A
B
B
A
B
PROFILE PROJECTOR
Desktop-type profile projectors with an effective 305mm screen
diameterV-12B Series
DA
PROJECTION LENSES
Profile ProjectorPCA40000 (V12BD-C)PCA41000 (V12BD)PCA42000
(V12BS-C)PCA43000 (V12BS)
5xAPCB30501
10xPCB31001
20xAPCB32001
25xPCB32500
50xAPCB35001
100xAPCB38101
200xPCB38200 500x
PCB38500
(mm)
SYSTEM DIAGRAM SPECIFICATIONS
Increased maximum workpiece heightBecause the rigidity of the
instrument is increased, thanks to CAE (Computer-Aided Engineering)
design, workpieces as tall as 100mm can be loaded.
Built-in digital counter and protractorThe V-12BDC and V-12BSC
types come with a digital XY counter, while the V-12BDC and V-12BD
types have a built-in digital protractor for greater ease of
use.
Erect imagesProjection images are erect and unreversed for easy
measurements, and their quality is as sharp as inverted images.
Switchable vertical/oblique illuminationThe built-in surface
illuminator can be switched between vertical and oblique
illumination, making detection of edges in resin parts and other
workpieces much easier.
Four-step zooming condenser lensWhen contour illumination is
used, this condenser lens delivers the right amount of light to
suit the magnification of the projection lens selected. (The DIA
condenser must be used with this lens when the magnification is
200x or 500x.)
Large stage mountableThe V-12B adapts a focusing mechanism that
achieves focus by moving the objective head up and down, allowing
stages with longer cross travel to be mounted. When the 10 x 6
Stage is used, the projector can measure areas as wide as 250 x
150mm.
Adjustable base feetBecause the base is 2mm away from the
installation surface and the bese feet are adjustable, the
projector is less affected by irregularities in the installation
surface and external vibrations.
Lamp Verification Tool*1PAH09100
Rotating Table Type 3PPE42100
Rotating TableType4PPE50110
V-block FixturePPF00000
GoniometerType 2
PPE32100
Tilting Center FixtureType A
PPG40000
Shade*1PAH03000
ObliqueIllimination
SystemPCE23200
DIA Adapter APCH39200
Green Filter ND Filter PCH36100/PCH36200
Projector Table B(Not useable as a table for V12B)PXK21035
200x, 500x EPI BoosterPCE37400
High Magnification DIA Condenser Lens(used with 200x or 500x
projection lens)
PCE47200
I/O Panel(V-12BDC/ V-12BSC)
Digital PrinterDPU-414EXK21072
Foot Switch 4EFE00202
Standard 300mm ScaleEDW20400
CabinetPAH05010
*2
*2
*2
*2
2 x 2 Stage PPB25100
03L Stage PPB35120
4 x 4 Stage PPB35140
6 x 4 Stage PPB45300
8 x 6 Stage PPB56000
10 x 6 Stage PPB67000
MagnificationVerification ToolPAH02000
Reading Scale with HolderPAH01301
Chart Clip Type LL (X2 pcs.) PXA20181
Projection Lenses
*1: Standard accessory *2: Letters above the stages represent
accessories that can be mounted.*3: Please use Foot Switch 2
(EFE00200) for profile projectors that have manufacturer numbers
starting with No. 1 or No. 2.
V-12BDC configured with 10 x 6 Stage
Magnification 5x
10x20x25x50x
100x200x500x
Diameter of field of view 61 30 15 12
6 3 1.50.6
Half mirrorBuilt-in; fixed
Built-in; switchableBuilt-in; switchableBuilt-in;
switchableBuilt-in; switchableBuilt-in; switchableBuilt-in;
switchableBuilt-in; switchable
A 60747462615024
3.5
D 127215244178173123
497
Three projection lenses can be mounted on the rotary turret at
one time. All projection two emdashes boast high resolution and
minimal distortion, while their working distances are longer than
competitive lenses.
EPI Condenser LensUnder surface illumination, the EPI condenser
lens is necessary when 200x or 500x projection lenses are used.
DIA Condenser LensUnder contour illumination, the DIA condenser
lens is necessary when 200x or 500x projection lenses are used.
A=working distanceD=maximum diameter of a measurable cylindrical
specimen
*Part of the field of view is vignetted when the 5x projection
lens is used under contour illumination.
Type
Image
Screen
Lens mount
Projection lens
Magnification accuracy
Light source
Max. workpiece height
Stage
Power input
Dimensions(W x D x H)
Weight
XY counter
Vertical optical axis bench type
Erect and unreversed
V-12BDC/V-12BD ø305mm (12.0 in.); etched center crossline;
provided with digital protractor fine rotation knob;
360° rotatable (with digital reading to 1 minute of
arc)V-12BSC/V-12BS ø305mm (12.0 in.) fixed screen
3-lens turret mount; clamping type
5x, 10x, 20x, 25x, 50x, 100x, 200x, 500x
±0.1% for oblique surface/contour illumination±0.15% for
vertical surface illumination24V-150W halogen for both contour and
surface illumination
100mm (4.0 in.), 70mm (2.8 in.), with 10 x 6 Stage
10 x 6, 8 x 6, 6 x 4, 4 x 4, 03L or 2 x 2 Stage directly
mountable
AC 100/120V (50/60 Hz), AC 220/230/240V (50/60 Hz)
409 x 648 x 970-1,070mm
(16.1 x 25.5 x 38.2-42.1 in.)
Approx. 80kg (177 lb.)
V-12BDC Built-in (1.0/0.5µm selectable) V-12BD Not
providedV-12BSC Built-in (1.0/0.5µm selectable) V-12BS Not
provided
Wide measurable range: cross travel 250 x 150mm.Models with a
built-in digital counter and/or
protractor are available.
V-12BDCV-12BDV-12BSCV-12BS
Built-in digital protractor
*Fixed screen*Fixed screen
Built-in digital counter - -
D: Deluxe type. Comes with a built-in digital protractor.S:
Standard type. No digital protractor is included.C: With built-in
X-Y digital counter.
*The V-12BSC and V-12BS types have a fixed screen. Therefore,
angular measurement by rotating the screen is not possible.
Four types selectable
Data Processing SoftwareE-MAX series
Retrofit Counter/DP UnitEFA50000
2-Axis Counter DisplayEFB50200
Data ProcessorDP-E1EFB51000
Foot Switch 4*3EFE00202 (See page 11)
-
8 9
ACCESSORIES
438 (17.2)285 (11.2)250 (9.8)
354
(13.
9)24
0 (9
.4)
190
(7.5
)
413 ±50 (16.3±2.0)
313
(12.
3)
285 (11.2)
192
(7.6
)
38.1
(1.5
)
307.5 (12.1)
286.
3 (1
1.3)
255 (10.0)225 (8.9)195 (7.7)
192
(7.6
)
134
(5.3
)
2000 (78.7)
ø107
ø174ø150
Stage Type 4 x 4 Stage Type O3L Stage Type 2 x 2
Stage Type 10 x 6 Stage Type 8 x 6 Stage Type 6 x 4
Rotating Table Type 3 For 6 x 4, 4 x 4
Standard 300mm Scale
Stage Specifications
Rotating Table Specifications
Rotating Table Type 4 For 9V, 10 x 6, 8 x 6 Goniometer Type 2
For O3L
90 (3
.5)
90 (3
.5)
92 (3
.5)
90 (3
.5)
60 (2.4) 60 (2.4)
60 (2
.4)
10-M6 Depth 10 (0.39)Tool installation screw hole
6-M6 Depth 7 (0.28)
90 (3
.5)
90 (3
.5)
508 (20)350 (13.8)
354
(13.
9)
250 (9.8)
240
(9.4
)18
0 (7
.1)
416
(16.
4)
588 (23.1)400 (15.7)374 (14.7)
300 (11.8)
280
(11.
0)
5 (0
.20)
220
(8.7
)
120
(4.7
)
126
(5.0
)
521.5 (20.5)
60 (2.4) 60 (2.4) 60 (2.4) 60 (2.4) 60 (2.4)
60 (2.4) 60 (2.4) 60 (2.4)
60 (2.4) 60 (2.4) 60 (2.4)
60 (2.4
)
60 (2.4
)
60 (2.4
)
60 (2.4
)
360 (14.2)450 (17.7)
286
(11.
3)46
4.5
(18.
3) 305 (11.8)
18-M6 Depth 10 (0.39)Tool installation screw hole
16-M6 Depth 10 (0.39)Tool installation screw hole
12-M6 Depth 10 (0.39)Tool installation screw hole
190
(7.5
)
240
(9.5
)
360 (14.2)
225 (8.9)
134
(5.8
)
286
(11.
3)
30 (1
.19) 30
(1.1
9)30
(1.1
9)
340 (13.4)360 (14.2)390 (15.4)
ø262
ø271
25 (0
.98)
120 (4.7)
230 (9.1)
170
(6.7
)
ø107
130
(5.1
)
210 (8.2)
Stages (mm/in.)
(mm/in.)
Gauges stage travel accuracy up to 300mm.Both 10mm-interval
sensor patterns and calibrations are provided. Made of low
heat-expansion glass, for minimizing influence of heat.Accuracy:
Within 1µm against compensation values
Magnet-type V-Block FixtureFor 8 x 6, 6 x 4, and 4 x 4
stages.The dedicated V-block fixture is available for the stage
type 03L.
Tilting Center FixtureUsed to tilt samples around the center
axis.
Rotating Tables
Tool installation groove dimensions (mm/in.)
Tool installation screw positions(mm/in.)1.
6 (0
.06)
6.2 (0.24)
10.2 (0.40)
13.5 (0.53)
11.7 (0.46)
60˚
8 (0
.32)
2 (0.0
8)
4 (0
.16)
T groove: Rotating Table A Dovetail: 03L
10 x 6, 8 x 6, 6 x 4, 4 x 4 and 2 x 2 stages require 10-M6 depth
10 tool installation screw holes.T grooves may be specially ordered
for 2 x 2 rotating boards.
Type Surface area mm (in.)
Stage glass dimensionsmm (in.)
Crosswide travelmm (in.)
Min.reddingmm (in.)
Stage top Toolinstallation
Loading capacitykg (lb.)
Weight kgkg (lb.)
Reading method
10 x 68 x 66 x 44 x 4
O3L 2 x 2
Rotating Table Type 3Rotating Table Type 4Goniometer Type 2
450 x 286 (17.7 x 11.3)400 x 280 (15.8 x 11.0)350 x 240 (13.8 x
9.5)285 x 240 (11.2 x 9.5)285 x 192 (11.2 x 7.6)195 x 192 (7.7 x
7.6)
Table diameter (in.)204mm (8.0)282mm (11.0)160mm (6.3)
Glass insert diameter (in.)165mm (6.5)262mm (10.3)107mm
(4.2)
Rotation range360˚ (uncalibrated)360˚ (uncalibrated)360˚ (2’
reading)
Tool installationScrew hole 6-M6Screw hole 6-M6T groove/Screw
hole 2-M6
WeightApprox. 5kg (11 lb.)Approx. 8kg (17.6 lb.)Approx. 4kg (9
lb.)
305 x 190 (12.0 x 7.5)245 x 192 (9.6 x 7.6)204 x 145 (8.0 x
5.7)170 x 145 (6.7 x 5.7)170 x 120 (6.7 x 4.7)107 in diameter
250 x 150 (7.9 x 5.9)200 x 150 (7.9 x 5.9)150 x 100 (5.9 x
3.9)100 x 100 (3.9 x 3.9)100 x 50 (3.9 x 2.0)50 x 50 (2.0 x
2.0)
Linear encoderLinear encoderLinear encoderLinear encoderLinear
encoderLinear encoder
0.0005 (0.00002)0.0005 (0.00002)0.0005 (0.00002)0.0005
(0.00002)0.0005 (0.00002)0.0005 (0.00002)
-----
360˚ rotatable
N/A (screw)N/A (screw)N/A (screw)N/A (screw)
DovetailN/A (screw)
20 (44)15 (33)10 (22)
6 (12)5 (11)5 (11)
Approx. 50 (110)Approx. 36 (79)Approx. 27 (60)Approx. 23
(51)Approx. 15 (33)Approx. 13 (29)
230
(9.1
)30
(1.1
8)
282 (11.0)250 (9.8) (Installation screw)
ø174ø204
25 (0
.98)
6-M6 Depth 10 (0.39)Tool installation screw hole
-
Reference axis settingXY origin settingCoordinate system
rotation 1Coordinate system rotation 2
Name of output elementX, Y, Z: Coordinate valuesE: Deviation R:
RadiusD: Diameter A: Intersection angleLD: Longest diameterSD:
Shortest diameterL: Distance N: Slope from third axisN1: Slope from
first axisW1: Geometric deviation
Coordinate system resetCoordinate system recall 1Coordinate
system rotation 3
10 11
①� ②�
ACCESSORIESNikon has a complete lineup of measurement
support/data processing systems for specific purposes and
applications that support data utilization, as well as a wide
variety of accessories.
E-MAX is a series of general-purpose measurement support systems
for a wide range of manual measuring instruments, including
projectors. It has a common user interface for PCs, and allows the
selection of two-dimensional data processing, visual measurement
using TV images, and image measurement in accordance with the
measuring instrument being used. It can also be added on to
existing measuring instruments.
Data Processing Software E-MAX Series
Data Processor DP-E1
Digital Thermal Printer DPU-414 Foot Switch 4
2-Axis Counter Display Retrofit Counter/DP Unit
Introducing general-purpose measurement support systems with a
common user interface for PCs
Data Processing Software E-MAX Series: Measurement
Processing
Actual measurement + recall measurement
Recall measurement (reference settings)
The DP-E1 is a new data processor that Nikon developed in
response to the demands for enhanced accuracy and improved work
efficiency across the entire measurement system. Despite its
compact form with a built-in counter, the unit dramatically
improves usability thanks to its 320 x 240 pixel LCD. It enables
integrated operation with measuring microscopes and profile
projectors, speedy measurement calculations, and reliable data
processing.
Data processing system combining both enhanced accuracy and ease
of use
Measurement support application (option): VMR Report Generator
(document support system)
User-friendly Windows¤ interface allows a host of measurement
and processing functions to be easily controlled using easy-to
understand multi windows and a mouse.
A built-in navigation function improves measurement efficiency
by displaying the current position and the next measurement
position during replays.
Graphical windowCounter windowResults display window
E-MAX/D SetExample combinationV-12B profile projector and a PC
running E-MAX
Point (X, Y, Z, E)Midpoint (X, Y, Z)Maximum point (X, Y,
Z)Minimum point (X, Y, Z)
Recall settings
Distance between two points (L, Lx, Ly, Lz)Distance between a
point and a line (X, Y, Z, L)Intersect of two lines (X, Y, Z,
A)Midline (N1)Intersect of a circle and a line (X1, Y1, Z1, X2, Y2,
Z2)
Intersect of two circles (X1, Y1, Z1, X2, Y2, Z2)Contact between
a point and a circle (X1, Y1, Z1, X2, Y2, Z2)Perpendicularity
(W1)Parallelism (W1)
Circle (X, Y, Z, R, D, E)Ellipse (X, Y, Z, LD, SD, N1)Line (N1,
E)Plane (N, N1, E)
Square (X, Y, Z, L1, L2, N1)Key input pointKey input circle
Number is the current position and number is the next
measurement position.
*An output window, image window, and editing listing window can
be displayed as necessary.
List windowToolbar (calipers)Toolbar (measurement codes)
User-friendly, small-footprint systemThe compact body includes a
measurement counter function. Work can proceed smoothly thanks to
the easy-to-view display.
Easy-to-master control keysThe unit is controlled using
easy-to-understand measurement code buttons and measurement result
lists. This enables users to easily conduct measurement, even the
very first time.
Saves measurement results on USB memoryTeaching files and
measurement results files can be saved to a USB memory device so
that they can be easily taken wherever they are needed.
The DPU-414 connects with a Retrofit Counter/DP Unit or one of
the I/O Panels (V-20B, V-12BSC, or V-12BDC) and prints out counter
values for X and Y that were read by a photoelectric linear encoder
and calculation results by the DP-E1.
This switch can be used for such purposes as issuing load
instructions for the DP-E1 from a Retrofit Counter/DP Unit or for
EXRST/EDGE connector (V-20B, V-12BSC, or V-12BDC). However, please
use Foot Switch 2 for profile projectors that have manufacturer
numbers starting with No. 1 or No. 2. It helps improve measurement
efficiency by freeing the user s hands to perform other tasks.
This unit is for connecting the 2-Axis Counter Display to the
V-24B, V-12BD, or V-12BS. It is also required when adding the DP-E1
Data Processor.
These displays show X and Y-axis coordinates. (Can be switched
between 1 m, 0.1 m, and 0.01 m.)
(V-24B, V-12BD, and V-12BS) (V-24B, V-20B, and V-12B)
Specialized for processing measurement data Enhanced
two-dimensional data processing functions that were developed by
the DP series of 2D data processing systems Handy functions
dedicated for manual measuring instruments, including a
navigation function Can be installed on notebook PCs (D Set
only)
Set details Data Processing Software E-MAX PC