Profibus & Profinet in Factory Automation Event, Coventry 21 st August 2013
May 06, 2015
Profibus & Profinet in Factory Automation Event, Coventry 21st August 2013
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
2
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Welcome
House keeping points – Visits, Phones & Fires.
Visits – Toilets are through the doors and on the left
Phones – Please switch off or set to Silent
Fires – If alarm sounds, follow presenters, down to the reception and out towards the main car park.
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
Agenda3
09.00 Coffee and Registration09:30 Introduction to the Manufacturing Technology Centre09.45 Profibus & Profinet Update. - Mark Freeman09.55 Practical steps for a successful Profibus project. - Xiu Ji10.35 Introduction to Profinet. - Derek Lane11.15 Coffee11.35 Safety & Security on PROFINET & Profibus networks. -
Peter Brown12.15 PROFIBUS Health checking and monitoring - Live demonstration.
Andy Verwer/Dale Fittes12.55 Lunch13.35 Features & Benefits of Profinet networks - Live demonstration. -
Dave Walker/Andy Williams14.15 PROFINET Frame Analysis. Demonstration showing the use of
WireShark to look at PROFINET frames. - Peter Thomas14.55 Summary/Questions15.00 Close followed by (optional) tour of the MTC workshops
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
4Two technologies in one organisation
Regional PI Associations
PI Competence Centers
PI Test Laboratories
PI Training Centers
PI (PROFIBUS & PROFINET International)
Technologies
Fieldbus based Automation Technology
Ethernet based Automation Technology
Proxy Technology
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
5
Australia/New ZealandRPA, PICC, PITC
PI worldwide support
PolandRPA, PICC
RussiaRPA
SlovakiaRPA
Southern AfricaRPA, PICC, PITC
ChinaRPA, PICC, PITL
JapanRPA, PICC, PITL
KoreaRPA, PICC
South-East-AsiaRPA, PICC
Middle-EastRPA
IndiaRPA, PICC
Czech Rep.RPA, PICC, PITL
BrazilRPA, PICC
USARPA, PICC, PITC, PITL
ChilePICC
DenmarkRPA
FinlandRPA
UKRPA, PICC, PITC
IrelandRPA, PICC, PITC
NetherlandsRPA, PICC,PITC, PITL
NorwayRPA, PICC, PITC
SwitzerlandRPA, PICC, PITC
Germany & AustriaRPA, PICCPITC, PITL
FranceRPA, PICC, PITC
BelgiumRPA, PICC
ItalyRPA, PICC
SwedenRPA, PICC
SpainRPA, PICC
27 Regional PI Associations (RPA)50 PI Competence Centers (PICC)
18 PI Training Centers (PITC)10 PI Test Laboratories (PITL)
PI worldwide: PI Technical Support:
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
66PROFIBUS Nodes
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
77PROFIBUS Nodes in PA
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
88PROFINET Nodes
World Market for Industrial Ethernet and Fieldbus Technologies 2013
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
9
Use of the PROFIsafe profileTested and accepted with PROFIBUS & PROFINETStandard and failsafe communications over the same transmission pathMeets the highest safety categories, SIL level 3 / PL e / Cat. 4First communications standard developed in accordance with safety standard IEC 61508. Developed to IEC 61784-3-3, PROFIsafe is the international standard
Even wireless…Failsafe and available,just like hard-wired!
“Black
chan
ne
l"
Standard data
Safety-relateddata
PROFIsafeLayer
StandardBUS protocol
Standarddata
Safety-relateddata
PROFIsafeLayer
StandardBUS protocol
PROFINET
IndustrialEthernet
Access Point
Client
RCoax RCoax
IO-Device
Mobile Panel
Access Point
PROFINET
IndustrialEthernet
Failsafe communications – even wireless
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
1010PROFIsafe Nodes
World Market for Industrial Ethernet and Fieldbus Technologies 2013
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
1111Training for network members
Training is available in a range of areas to upgrade your skills including:
Certified PROFIBUS Engineer – combining installation, commissioning and engineering
PROFIBUS System Design Course
Certified PROFINET Engineer – combining installation, commissioning and engineering
PROFINET Developer Course
Training can be undertaken at the PROFIBUS International Competence Centre in Manchester, on your company premises or at an off-site location of your choice
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
1212Training for network members
PROFIBUS and PROFINET training is offered through:
PROFIBUS International Competence Centre - Manchester Metropolitan University in Manchesteror a location of your choice (http://www.sci-eng.mmu.ac.uk/ascent/)
PROFIBUS on-site training is offered through:
PROFIBUS International Training Centre - Verwer Training & Consultancy Ltd (http://verwertraining.com/)
Our training partners
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
13Web Based Training
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
14PROFIBUS & PROFINET on the Web
www.profibus.com www.profinet.com
www.profibus.co.uk
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Profibus & Profinet UK User Group
Profibus & Profinet in Factory Automation
Agenda15
09.00 Coffee and Registration09:30 Introduction to the Manufacturing Technology Centre09.45 Profibus & Profinet Update. - Mark Freeman09.55 Practical steps for a successful Profibus project. - Xiu Ji10.35 Introduction to Profinet. - Derek Lane11.15 Coffee11.35 Safety & Security on PROFINET & Profibus networks. -
Peter Brown12.15 PROFIBUS Health checking and monitoring - Live demonstration.
Andy Verwer/Dale Fittes12.55 Lunch13.35 Features & Benefits of Profinet networks - Live demonstration. -
Dave Walker/Andy Williams14.15 PROFINET Frame Analysis. Demonstration showing the use of
WireShark to look at PROFINET frames. - Peter Thomas14.55 Summary/Questions15.00 Close followed by (optional) tour of the MTC workshops
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman