PRO.BOSE.COM 1 OF 4 Product Description Ideal for zone-expansion applications, Bose PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, Bose PowerSpace amplifiers provide the power and performance to get the job done — pure and simple. Applications Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones PROFESSIONAL TECHNICAL DATA PowerSpace P2600A versatile power amplifier Key Features 600 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging I-Share output delivers 2x power level into low-impedance (2-4 Ω) or high-impedance (70/100V) loads by combining the current of both channels Auto-standby mode saves power when audio signal falls below a set threshold after 20 minutes, then wakes when audio returns
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRO.BOSE.COM 1 OF 4
Product DescriptionIdeal for zone-expansion applications, Bose PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, Bose PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.
ApplicationsRetail stores
Restaurants and bars
Hospitality venues
Conference centers
Schools
Auxiliary zones
P R O F E S S I O N A L
TECHNICAL DATA
PowerSpace P2600A versatile power amplifier
Key Features600 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems
Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging
I-Share output delivers 2x power level into low-impedance (2-4 Ω) or high-impedance (70/100V) loads by combining the current of both channels
Auto-standby mode saves power when audio signal falls below a set threshold after 20 minutes, then wakes when audio returns
Technical SpecificationsPOWER RATING
Amplifier Power 2x 600 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
I-Share Mode Power 1x 1200 W (2-4 Ω, 70/100V)
Gain (Low-Z mode) 35 dB
Gain (70V mode) 35 dB
Gain (100V mode) 38 dB
AUDIO PERFORMANCE
Frequency Response 4-8 Ω: 20 Hz – 20 kHz (+/- 1 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk) > 80 dB @ 1 kHz, > 65 dB @ 20 kHz
Dynamic Range ≥ 100 dBA (at rated power)
Audio Latency < 1 ms (any analog or AmpLink input to loudspeaker output)
AUDIO INPUTS ANALOG AMPLINK
Input Channels 2 balanced 8 digital
Connectors 6-pin Euroblock RJ-45 (Input)
Input Impedance 10 kΩ
Maximum Input Level 22 dBu (at 14 dBu sensitivity setting)
Sensitivity -10 dBV / 4dBu / 14 dBu
AUDIO OUTPUTS SPEAKER AMPLINK
Outputs 2 8 digital
Connectors 4-terminal block RJ-45 (Thru)
INDICATORS AND CONTROLS
Power LED Solid white: Power is on. Blinking white: Unit is in auto standby mode. Solid red: Power supply fault. Blinking Red: Thermal fault.
Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping.
Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Amplifier or thermal fault.
AC Power Consumption 120 VAC: 25 W (Auto standby), 570 W (Max) 230 VAC: 25 W (Auto standby), 570 W (Max)
Mains Connector Standard IEC (C14)
Protections Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
PHYSICAL
Operational Temperature Range 0 °C to 40 °C
Storage Temperature Range -40 °C to 70 °C
Dimensions (H × W × D) 44 × 483 × 420 mm (1.7 × 19.0 × 16.5 in)
Net Weight 6.2 kg (13.7 lb)
Shipping Weight 8.2 kg (18.1 lb)
Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow
PRO.BOSE.COM 2 OF 4
PowerSpace P2600A versatile power amplifier
q w
PRO.BOSE.COM 3 OF 4
q POWER SWITCH – In/Out standby mode
w POWER LED Solid white LED indicates power is ONBlinking white LED indicates the unit is in auto standby modeSolid red LED indicates a power supply faultBlinking red LED indicates a thermal fault
e INPUT 1, 2 SIGNAL LED – Each LED operates independentlyGreen LED indicates signal is present Amber LED indicates signal is near clipping Red LED indicates clipping
r OUTPUT 1, 2 LIMIT LED – Each LED operates independently LED is amber when the amplifier is limiting the corresponding output due to exceeding the outputs’ Vpeak or Vrms limitsLEDs will display solid red if an amplifier fault is detectedLEDs will blink red when all outputs are muted
PowerSpace P2600A versatile power amplifier
q OUTPUT ATTENUATION 1, 2 – Output attenuators for each output. Turn the controls clockwise to decrease attenuation and counter-clockwise to increase attenuation
w MUTE – Contact closure connection where a short across the mute connector will mute all outputs. Mute polarity can be inverted by a DIP switch
e OUTPUT – 4-terminal block connector for loudspeaker connections. Each channel can deliver up to 600 watts regardless of load into 4 Ω, 8 Ω, 70V, or 100V. Outputs can be I-Shared
r DIP SWITCHES – A bank of switches used to set amplifier configuration
t INPUT SELECT – Dial selects if analog or AmpLink audio inputs are used. The default state is analog 1:1
y AMPLINK – INPUT RJ-45 connector that receives up to 8 digital channels from a Bose AmpLink product. The amp also supports a THRU path for daisy-chaining all 8 digital audio channels to up to 8 other Bose AmpLink products, at a maximum distance of 10 m between products. CAUTION: Shielded EIA/TIA 568B straight Cat 5 cable, or equivalent, is required for proper AmpLink operation, 1 m cable included. Unshielded cable is not supported and may cause AmpLink to operate improperly. Do NOT connect either RJ-45 port to an Ethernet-based network
u ANALOG INPUTS – Balanced 6-pin Euroblock line-level input connector
i UPDATE – Firmware updates
o GAIN/SENSITIVITY – Slide switch to set gain/sensitivity setting
a AC INLET – Removing the AC cord when the amplifier is on is equivalent to powering down using the front panel power switch and is an acceptable power-down method
w e rtq iouy a
re
PRO.BOSE.COM 4 OF 4
Mechanical Diagrams
PowerSpace P2600A versatile power amplifier
For additional specifications and application information, please visit PRO.BOSE.COM. Specifications subject to change without notice. 03/2020
FreeSpace® DS 40SE VAloudspeaker
TE
CH
NIC
AL D
ATA
SH
EE
T
Bose Professional Systems Division 1 OF 7
p r o . B o s e . c o m
Key Features• Full-range loudspeaker with a single 4.5" (114 mm) full-range driver in
a ported enclosure designed for surface mounting in foreground andbackground music and paging applications
• Simple 1->2->3 installation system. Mounting hardware allows forhorizontal and vertical orientation with adjustable pitch or yaw
• Integrated multi-tap transformer with innovative thumb wheeladjustment for easy-to-change tap settings from under front end cap
• Shared voicing across entire FreeSpace DS product family enablesDS 16, DS 40, and DS 100 loudspeakers to be integrated on the samesystem and maintain consistent tonal quality
• Supported by a suite of accessories, including wall-mount bracket,ceiling-mount bracket, pole-mount bracket and junction boxes
Product OverviewThe Bose® FreeSpace DS 40SE VA is the most versatile member of the DS loudspeaker family. It is a high-performance, full-range,surface-mount loudspeaker designed for foreground and background music and speech reproduction in a wide range of installedapplications. The DS 40SE VA features high output and 125° x 125° coverage pattern with a frequency range down to 70 Hz.
Technical SpecificationsSystem PerformanceFrequency Response (+/-3 dB)1 80 Hz - 17 kHzFrequency Range (-10 dB)1 70 Hz - 19 kHzNominal Dispersion 125° H x 125° VRecommended High-Pass Filter 70 Hz high-pass filterLoudspeaker EQ RecommendedOverload Protection PTC/ResistorLong-Term Power Handling2 40 W (160 W peak) Sensitivity (SPL / 1 W @ 1 m)3 87 dB SPLMaximum SPL @ 1 m4 103 dB SPL (109 dB SPL peak) Nominal Impedance 8 Ω (transformer bypassed)Transformer Taps (70/100 V) 70 V: 2.5 W, 5 W, 10 W, 20 W, 40 W
100 V: 5 W, 10 W, 20 W, 40 WTransducersDriver Compliment 4.5" (114 mm) full-range driverPhysicalEnclosure PC/ABS, texturedGrille Powder-coated steel grilleEnvironmental Outdoor per EN34-24 Type BConnectors Three-terminal barrier strip integrated on included mounting bracket. Optional accessories available for use when ceramic connector and
thermal fuse are required.Wire gauge: 18 AWG (0.8 mm) to 14 AWG (2.5 mm)
Suspension / Mounting Included bracket allows for horizontal or vertical mounting positions, each with either pitch or yaw adjustment. Insert on rear of enclosure sizedfor M4 x 14 mm screw for use with safety chain
Dimensions 6.3" H x 12.8" W x 6.9" D (159 mm x 326 mm x 175 mm)Depth with wall mount bracket: 9.4" (238 mm)
Net Weight 8.5 lb (3.9 kg) Shipping Weight 10.8 lb (4.9 kg) Product CodeBlack 321279-0130White 321279-0230
Footnotes:1 Frequency response and range measured on-axis with recommended active EQ in an anechoic environment.2 Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.3 Sensitivity measured in free field (no boundary-loading gain) with recommended active EQ, referenced to 1W/1m.4 Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
The specifications data was measured in an anechoic chamber, free-field:Reference axis: Axis is on the center of grille surface and perpendicular to the grille surfaceReference plane: Plane is on the grille surface and perpendicular to the reference axisHorizontal plane: Plane is containing the reference axis and perpendicular to the reference plane
FreeSpace® DS 40SE VAloudspeaker
TE
CH
NIC
AL D
ATA
SH
EE
T
Bose Professional Systems Division 4 OF 7
p r o . B o s e . c o m
Mechanical Diagrams
FreeSpace® DS 40SE VAloudspeaker
TE
CH
NIC
AL D
ATA
SH
EE
T
Bose Professional Systems Division 5 OF 7
p r o . B o s e . c o m
Horizontal Plots
FreeSpace® DS 40SE VAloudspeaker
TE
CH
NIC
AL D
ATA
SH
EE
T
Bose Professional Systems Division 6 OF 7
p r o . B o s e . c o m
Vertical Plots
DS40SE
0
30
60 90
120
150
180
210
240270
300
330
-30 -24-18 -12 -6 0 6
63 Hz Octave Band
63 Hz
80 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30 -24-18 -12 -6 0 6
125 Hz Octave Band
100 Hz
125 Hz
160 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30-24 -18 -12 -6 0 6
250 Hz Octave Band
200 Hz
250 Hz
315 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30 -24-18 -12 -6 0 6
500 Hz Octave Band
400 Hz
500 Hz
630 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30 -24-18 -12 -6 0 6
1000 Hz Octave Band
800 Hz
1000 Hz
1250 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30-24 -18 -12 -6 0 6
2000 Hz Octave Band
1600 Hz
2000 Hz
2500 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30 -24-18 -12 -6 0 6
4000 Hz Octave Band
3150 Hz
4000 Hz
5000 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30 -24-18 -12 -6 0 6
8000 Hz Octave Band
6300 Hz
8000 Hz
10000 Hz
0
30
60 90
120
150
180
210
240270
300
330
-30-24 -18 -12 -6 0 6
16000 Hz Octave Band
12500 Hz
16000 Hz
FreeSpace® DS 40SE VAloudspeaker
TE
CH
NIC
AL D
ATA
SH
EE
T
All information subject to change without notice.® 2012 Bose Corporation
All trademarks are those of their respective owners.
Bose Professional Systems Division 7 OF 7
p r o . B o s e . c o m
Architects’ and Engineers’SpecificationsEach loudspeaker shall be a 40 watt, ported loudspeaker systemutilizing one 4.5" (114 mm) full-range HVC (Helical Voice Coil)driver. The loudspeaker shall be used for installation on walls,ceilings, and other flat, solid surfaces.
Each loudspeaker shall have a nominal rated impedance of 8ohms and shall be wired in parallel with a line voltage matching(step-down) transformer with an accessible, front-mountedlevel selector appropriate for setting various output taps. Theloudspeaker input connections will allow for direct connection to70 volt, 100 volt or low-impedance amplifiers.
The loudspeaker shall have a protection circuit to protect theproduct from occasionally being overdriven.
Each loudspeaker shall have a bandwidth of 80 Hz – 17 kHzand a maximum continuous acoustic output of 103 dB SPLreferenced to a full bandwidth pink noise input at 1 meter at theloudspeaker’s rated power. The input connection shall consist ofa three-terminal barrier strip on the included mounting bracket.Each loudspeaker shall be wired to the mounting bracket via a 4-pin, pre-wired connector.
Power settings available shall be: 2.5, 5, 10, 20, and 40 wattsat 70 volt; 5, 10, 20, and 40 watts at 100 volt; and 40 watts at 8ohms (when referenced to IEC noise for 100 hours). The nominaldispersion shall be 125° H x 125° V coverage pattern at -6 dB(average 1 – 4 kHz).
When used with optional junction boxes (wall- mount bracketvariant only), ceramic terminals and thermal fuse, the loudspeakershall meet numerous standards for combination music andevacuation systems around the world.
Exposed cosmetic surfaces of the loudspeaker shall be paintable,and the acoustically transparent grille component shall be formedof powder-coated steel.
The loudspeaker shall be the Bose® FreeSpace® DS 40SE VAloudspeaker.
Safety and RegulatoryComplianceThe FreeSpace® DS 40SE VA has passed extensive testingand complies with the following specifications and uses:
Certified to European Standard EN 54-24:2008 Componentsof Voice Alarm Systems-Loudspeakers
Environmental Type: B (outdoor applications)
Sensitivity (per EN 54-24) 76.2 @ 1W, 4m
Maximum Sound Pressure level (per EN 54-24): 88.5 @16W, 4m
Fire Alarm: 100Hz to 10kHz
General Signaling: 80Hz to 16kHz (+/- 3dB)
Wire GaugeThe FreeSpace DS 40SE VA loudspeaker is designed towork with 18 AWG (0.8 mm²) to 14 AWG (2.5 mm²) size wireonly.
This product conforms to all applicable EU directiverequirements. The complete declaration of conformity can befound at www.bose.com/compliance
ID # of the Certified Body: 0560Year of the CE Mark: 2012EC Certificate of Conformity #: 0560-CPD-12219002/AA/00
Key Features The BC-100 serves as three functions: connected with a gooseneck microphone to be a desktop
conference microphone, a boundary microphone, and insert a MIPRO ACT-Series bodypack transmitter into the BC-100 base to be a wireless conference microphone.
The rear panel has a balanced XLR connector with a switch to select the audio source from either the built-in boundary microphone or the optional gooseneck microphone.
The housing is made of metal with a thicker and anti-slip bottom pad to give added stability. TALK / MUTE button provides easy speaking or mute option; a LED indicates status.
Transmitters & Microphones ACT-T Series Bodypack Transmitters ACT-TC Series Bodypack Transmitters MM-204 Gooseneck Microphone (385 mm / 15.1 ") MM-205 Gooseneck Microphone (485 mm / 19.1 ") MM-206 Gooseneck Microphone (585 mm / 23 ") Technical Specifications Built-in Boundary Microphone
Ø 10 mm cardioid condenser microphone
Input Connector 4 pin XLR female Output Connector Balanced XLR male TALK / MUTE Button Mechanical PUSH-HOLD switch, with a LED status indicator Power Supply 12 ~ 48 V DC phantom power is required (external cable) Color Black Dimensions 100 × 58 × 150 mm (W × H × D) Weight Approx. 618 g
ACT-80TC Rechargeable Wideband Digital Bodypack Transmitter
Key Features Ultra slim bodypack transmitter with sturdy magnesium alloy housing. On-the-top features include mute switch, mini-XLR connector and antenna. Innovatively designed battery cover allows easy access to operate buttons and prevents accidental
operation. Adjustable belt clip allows wearing transmitter in up or down position. Backlit LCD displays all operational parameter information. Automatically synchronized with the receiver’s frequency by MIPRO’s patented ACT™ function. Six selectable gain settings. Selection of polarization for audio input to match capsules of different
polarizations. Mini-XLR input with secure screw lock connector.