ประวัติและผลงาน ของ Prof. Hiroyuki HAMADA เพื่อประกอบการพิจารณามอบปริญญากิตติมศักดิ์ วิศวกรรมศาสตรบัณฑิต ภาควิชาวิศวกรรมวัสดุและโลหการ 1) ประวัติสวนตัว ชื่อ - สกุล Hiroyuki HAMADA วัน เดือน ปเกิด พฤศจิกายน 2498 (November, 1955) อายุ 55 ป ที่อยูปจจุบัน Matsugasaki, sakyo-ku, kyoto, 606-8585, JAPAN โทรศัพท +81-75-724-7844 2) ประวัติการศึกษา • ปริญญาตรีวิศวกรรมศาสตรบัณฑิต (B.Eng), Doshisha University, 1978 • วิศวกรรมศาสตรมหาบัณฑิต (M.Eng), Doshisha University, 1980 • ดุษฏีวิศวกรรมศาสตรบัณฑิต (Dr.Eng), Doshisha University, 1985 3) ประวัติการทํางาน • นักวิจัย (Research Associate), Osaka Municipal Technical Research Institute, April, 1986 • ตําแหนงรองศาสตราจารย (Associate Professor), Kyoto Institute of Technology, October, 1987 • ตําแหนงศาสตราจารย (Professor), Kyoto Institute of Technology, March, 1998 • Director of Venture Laboratory of the Graduate School and dean of the Division of Advanced Fibro Science, 2011 • Director of Future-Applied Conventional Technology Centre in Kyoto Institute of Technology (F-ATC), 2011
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• นักวจัิย (Research Associate), Osaka Municipal Technical Research Institute, April, 1986
• ตําแหนงรองศาสตราจารย (Associate Professor), Kyoto Institute of Technology, October, 1987
• ตําแหนงศาสตราจารย (Professor), Kyoto Institute of Technology, March, 1998
• Director of Venture Laboratory of the Graduate School and dean of the Division of Advanced Fibro Science, 2011
• Director of Future-Applied Conventional Technology Centre in Kyoto Institute of Technology (F-ATC), 2011
4) ผลงานทางวชิาการ หนังสือ
Title Author Publisher Month/Year
Design and Manufacturing of Composites
H. Hamada and S. V. Hoa Technomic Publishing Company
1997.01
Design and Manufacturing of Composites
H. Hamada and S. V. Hoa Technomic Publishing Company
1998.08
3-D texitile reinforcements in composite materials
H. Hamada, S. Ramakrishna, Z. M. Huang
Woodhead Publishing Limited
1999.12
Design and Manufacturing of Composites
H.Hamada, S. V. Hoa, J. Lo, A. Yokoyama
Technomic Publishing Company
2000.03
Natural Fibers, Biopolymers, and Biocomposites
Amar K. Mohanty, Manjusri Misra, Lawrence T. Drzal, Hiroyuki Hamada,他 66名
Taylor & Francis Group
2005.01
บทความวจิัย และผลงานเผยแพร
Subject, etc. Author Publisher Year / Month
Effect of Silane Treatment on Fracture Process of Glass Fiber in Single Filament Coupon Test, Transactions of the Society of Fiber Science and Technology, Japan, 47, 4,178-183
N. Ikuta, H. Hamada, E. Nishio, I. Abe, and Z. Maekawa,
2003.04
The Mechanical Properties of Unidirectional Thermoplastic Composites Manufactured by a Micro-Braiding Technique, Composites Science and Technology, 60, 5, 717-722
M. Sakaguchi, A. Nakai, H. Hamada and N. Takeda
Elsevier Science Ltd
2000.04
Energy Absorption Properties of Braided Composite Rods, Composite Science and Technology, 60, 5, 723-729
H. Hamada, K. Kameo, M. Sakaguchi, H. Saito and M. Iwamoto
2000.05
Degradation of Braided Composites in Hot Water, Composites Science and Technology, 60,3,325-331
Mechanical Properties of Knitted Fabric Composites, Reinforced Plastics and
H. Hamada, K. Sugimoto, A. Nakai, N. Takeda, S.
2000.05
Composites, 19, 5, 364-376 Gotoh, T. Ishida Mechanisms of Modeiinterlaminar Fracture of Glass Woven Fabric Composites, Advanced Composite Letters, 9, 3, 217-221
M. Kotaki, T. Kuriyama, H. Hamada, Z. Maekawa and Narisawa
2000.03
Subject, etc. Author Publisher Year / Month
The Influence of Sizing Conditions on Bending Properties of Continuous Glass Fiber Reinforced Polypropylene Composites, Composites partA, 31, 9, 979-990
H. Hamada, K. Fujihara, A. Harada
Elsevier Science Ltd
2000.09
Mechanical Properties of Flat Braided Composites with a Circular Hole, Journal of Engineering Materials and Technology, 122, 4, 420-424
Takeru Ohki, Shinya Ikegaki, Ken Kurasiki, Hiroyuki Hamada and Masaru Iwamoto
2000.08
Effect of Surface Treatment on Mode I Interlaminar Fracture Behaviour of Plain Glass Woven Fabric Composites:Part I. Report of the 2nd Round-Robin Test Results, Composite Interfaces, 7, 3, 227-242
Effect of Hybrid Layers with Different Silane Coupling Agents on Impact Response of Glass Fabric Reinforced Vinylester Matrix Composites, Polymer, 42, ,7455ー7460
Jang-kyo Kim, Man-Lung Sham, Min-Seok Sohn, Hiroyuki Hamada
Elsevier Science Ltd
2001.08
Effects of Surface Treatment and Weave Structure on Interlaminar Fracture Behaviour of Plain Glass Woven Fabric Composites:Part II.Report of the 2nd Round Robin Test Results, Composite Interfaces, 9, 2, 207-218
J. K. Kim, M. L. Sham, H. Hamada, Y. Hirai, K. Fujihara, H. Saidpour, M. Sezen, P. Krawczak, R. Bequignat, J. Pabiot, S. Pinter, G. Banhegyl, C. Y. Yue, K. Padmanabhan, Y. Suzuki, K. Schulte, J. K. Karger-kocsis, L. Ye and J. J. Lesko
Elsevier Science Ltd
2002.02
Static and Dynamic Properties of Unidirectional CFRP Laminates with Flexible Interphase, Composite Interfaces, 9, 3, 247-258
Tsuyoshi Nishiwaki, Akio Tange, Kazuo Kitagawa and Hiroyuki Hamada
Elsevier Science Ltd
2002.03
Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite, Science and Engineering of Composite Materials, 10, 1, 29-34
M. Mizoguchi, Y. Ma, K. Inomata, K. Kitagawa, Y. Fujii, H. Hamada and M. Kotaki
2002.01
Subject, etc. Author Publisher Year / Month
Effect of Fiber Surface Treatment on Mechanical Properties of Polyethylene/Epoxy Composites, Polymer Composites, 10, 8, 589-597
Durability and Degradation on Mechanism of E and ECR Glass Reinforced Vinylester Resin under Acid and Alkali, Durability Analysis of Composites Systems 2001, 137-140
Y. Fujii, M. Mizoguchi and H. Hamada
2002.04
Fractography of Degraded Composites under Acid Environments, Durability Analysis of Composites Systems 2001, 311-315
Y. Koyama, M. Mizoguchi, H. Hamada and Y. Fujii
2002
Investigation of the Degraded GFRP Stack, Durability Analysis of Composites Systems 2001, 341-344
M. Mizoguchi, H. Hamada and Y. Fujii
2002
Effect of Surface Treatment Condition on Interfacial Degradation Behavior in GFRP under Acidic, Composite Interface, 9, ,433-444
Miaki Shibaya, Machiko Mizoguchi, Hiroyuki Hamada and Yoshimichi Fujii
Elsevier Science Ltd
2002.04
Experimental Investigation on the Crushing Properties of Carbon Fibre Braided Composite Tubes, IJ Crash 2003, 8, 5, 513-521
R. Inai, E C Chirwa, H. Saito, T. Uozumi, A. Nakai and H. Hamada
Performance Study of Braided Carbon/PEEK Composite Compression Bone Plates, Biomaterials, 24, ,2661-2667
K. Fujihara, Zheng-Ming Huang, S. Ramakrishna, K. Satknanantham and H. Hamada
Elsevier Science Ltd
2003
Prediction of Flow Patterns in the Polyurethane Foaming Process by Numerical Simulation Considering Foam Expansion, POLYMER ENGINEERIING AND SCIENCE, 43, 9, 1603-1611
Tetsuo Mitani and Hiroyuki Hamada
2003.09
Flow Behavior of Sandwich Injection Molding in Sequential and Simultaneous
D. Watanabe, U. S. Ishiaku, T. Nagaoka, K. Tomari and H.
2003.02
Injection, International Polymer Processing, , 2 , 199-203
Mechanical Properties and Internal Structure of Injection Molded Glass Fiber Reinforced PC/ABS, ANTEC 2003, 1530-1534
Susumu Takashima, Machiko Mizoguchi, U. S. Ishiaku and Hiroyuki Hamada
2003.05
Relationship Between Mechanical Properties and Internal Structure of PC/ABS Blend Injection Moldings Through Thickness Direction, ANTEC 2003, 1535-1539
Susumu Takashima, Machiko Mizoguchi, U.S. Ishiaku and Hiroyuki Hamada
2003.05
The Effect Ambient Moisture and Temperature Conditions on the Mechanical Properties of Glass Fiber/Carbon Fiber/Nylon 6 Sandwich Hybrid Composites Consisting of Skin-Core Morphologies, ANTEC 2003, 2142-2146
U. S. Ishiaku, H. Hamada, M. Mizoguchi, S. Takashima, W. S. Chow and Z. A. Mohd Ishak
2003.04
Microstructure of Injection Molded Glass Fiber Reinforced PC/ABS, Annual Technical Conference on Society of Plastic Engineers 2003, 3570-3574
Bin Yang, Shinya Otsuki and Takashi Kuriyama,Susumu Takasima,Hiroyuki Hamada
2003.05
Influence of Geometric Shape of Void on Mechanical Properties of Polyurethane Foam, ANTEC 2003, 3575-3578
Akihiko Goto, Kazumi Yamaguchi and Hiroyuki Hamada
2003.05
Subject, etc. Author Publisher Year / Month
Effect of Interphase Condition on Mechanical Properties in Polyamide Pre-Impregnated Glass Fiber Reinforced Polypropylene Composite, ANTEC 2003, 3732-3733
Machiko Mizoguchi, Satoko Baba, Hiroyuki Hamada and Weiliing Wu
2003.05
The properties of GF-Reinforced Thermoplastics in Beam Structure, Polymer & Polymer Composites, 11, 7, 581-589
M. Nomura, J. Makita and H. Hamada
2003.07
Structure and Mechanical Properties of Injection Molded CF/LCP Thin Plates,
Satoko Baba, Susumu Takashima, Yew Wei Leong and Hiroyuki Hamada Machiko.Mizoguchi and Takashi Kuriyama
2004.05
Subject, etc. Author Publisher Year / Month
Structure and Mechanical Properties of Glass Fiber Reinforced PC/ABS Fabricated by Ultra High Speed Injection Molding, Annual Technical Conference on Society of Plastic Engineers 2004, 2869-2873
Interfacial Properties of FILM-Insert Y. W. Leong, T. Fukui, M. 2004.03
Injection Molded Polyethylene-FILM/Polyethylene Matrix, Proceeding of ANTEC 2004, 1154-1157
Mizoguchi, U. S. Ishiaku, H. Hamada
Subject, etc. Author Publisher Year / Month
Mechanical Properties of Carbonized Bamboo Fiber Reinforced Biodegradable Polymer Composite., Proceeding of ANTEC 2004, 1636-1640
H. Matsui, K. Kitagawa, T. Semba, H. Okumura, U. S. Ishiaku, H. Hamada
2004
Prediction of Mechanical Properties of SMC Parts, Proceeding of ANTEC 2004, 1390-1394
Masahide Kawamura, Asami Nakai and Hiroyuki Hamada
2004.04
The Effect of Molding Condition on Interfacial Mechanical and Morphological Properties of Film Insert Injection Molded PPFILM/PP Matrix, Proceeding of ANTEC 2004, 1144-1148
S. Yamaguchi,M. Mizoguchi, H. Hamada, Y. W. Leong,U. S. Ishiaku, T. Tsujii
2004.04
Surface Smoothness of Glass Mat Reinforced Polypropylene Stampable Sheet, Polymers
& Polymer Composites, 12, 4, 333-339
Susumu Yamaguchi, Etsuko Tanigaki and Hiroyuki Hamada
2004.04
Initial Fracture of the Welt Weft-Knitted Textile Composites, Composites partA, 35, ,1185-1194
O.A.Khondker, T.Fukui, A.Nakai, H.Hamada
Elsevier Science Ltd
2004
Fabrication and Mechanical Properties of Aramid/Nylon Plain Knitted Composites, Composites partA, 35, ,1195-1205
O. A. Khondker, T. Fukui, M. Inoda, A. Nakai, H. Hamada
Elsevier Science Ltd
2004.04
Measurements and Prediction of the Compression-After-Impact Strength of Glass Knitted Textile Composites, Composites partA, 35, 2, 145-157
O. A. Khondker, I.. Herszberg, H. Hamada
Elsevier Science Ltd
2004.02
Influence of Processing Conditions on K. Fujihara, Zheng-Ming Elsevier 2004.04
Bending Property of Continuous Carbon Fiber Reinforced PEEK Composites, Composite Science and Technology, 64, ,2525-2534
Huang, S. Ramakrishna, H. Hamada
Science Ltd
The Effect of Molding Conditions on Mechanical and Morphological Properties at the Interface of Film Insert Injection Molded Polypropylene-Film/Polypropylene Matrix, Polymer Engineering and Science, 44,12, 2327-2334
Y. W. Leong, S. Yamaguchi, M. Mizoguchi, H. Hamada, U. S. Ishiaku and T. Tsujii
2004.12
Subject, etc. Author Publisher Year / Month
Impact and Compression-After-Impact Performance of Weft-Knitted Glass Textile Composites, Composites PartA:Applied Science and Manufacturing, , 36 ,638-648
O. A. Khondker, K. H. Leong, I. Herszberg, H. Hamada
2005.04
Effect of the Braiding angle on the Energy Absorption Properties of a Hybrid braided FRP Tube, Journal of Materials: Design and
Applications, 219,1,59-66
M. Okano, K. Sugimoto, H Saito, A. Nakai, and H. Hamada
2005.02
Tensile Strength and Fiber/Matrix Interfacial Properties of 2D -and 3D-carbon/Carbon Composites, Journal of the European Ceramic Society, Vol.25,No.4,P535-542
Microstructure and Fracture Behavior of (Co)Injection-Molded Polyamide 6 Composites with Short Glass/Carbon Fiber
S. Solomon, A. Abu Bakar, Z. A. Mohd Ishak, U. S. Ishiaku, Hiroyuki Hamada
2005.08
Hybrid Reinforcement, Journal of Applied Polymer Science, vol.97,No.3,P957-967 The Effect of Ambient Moisture and Temperature Conditions on the Mechanical Properties of Glass Fiber/Carbon Fiber/Nylon 6 Sandwich Hybrid Composite Consisting of Skin-Core Morphologies, Polymer Composites 2005, ,
U. S. Ishiaku, H. Hamada, M. Mizoguchi, W. S. Chow, Z. A. Mohd Ishak
2005.04
A New Evaluation Method of Adhesion between Glass/Epoxy Composite Substrate and Copper Foil for Multilayer Circuit Board Applications, Design and Manufacturing of Composites, 3, , 37-42
Naoto Ikegawa, Hiroyuki Hamada and Masahiro Yamanouchi
Design and Manufacturing of Composites
2000.03
Evaluation of Adhesion between Glass/Epoxy Composites and Copper Foils of Printed Circuit Board using a Fracture-mechanics Approach, Design and Manufacturing of Composites, 3, ,43-48
Mechanical Properties of in-situ Fiber Reinforced Composites form Blends Containing Polyethylene with Poly-caprolactam, Design and Manufacturing of Composites, 3, ,395-399
Takeshi Semba, Kazuo Kitagawa and Hiroyuki Hamada
2000.03
Potentiality of Continuous Fiber Reinforced Thermoplastic Composites, Design and Manufacturing of Composites, 3, , 408-412
Koji Kameo, Georg Bechtold, Hiroyuki Hamada and Klaus Friedrich
2000.03
Study on in-situ Fiber Reinforced Composites: Polyolefin/Polycaprolactone Blend, Design and Manufacturing of Composites, 4, ,176-183
T. Semba and K. Kitagawa, H. Hamada
2002.04
Study on in-situ Fiber Reinforced Composites: Polyolefin/Polycaprolactone Blend, Design and Manufacturing of Composites, 4, ,176-183
T. Semba and K. Kitagawa, H. Hamada
2002.04
Void Evaluation of Polyurethane foam Materials by Image Processing Technology, Design and Manufacturing of Composites,
Akihiro Goto,Kazumi Yamaguchi and Hiroyui Hamada
2002.04
4, ,192-196
Subject, etc. Author Publisher Year / Month
Fiber Orientation and Mechanical Properties of Injection Molded CF/LCP Thin Plates, Design and Manufacturing of Composites, 4, ,197-204
Microscopic Observation of Initial Fracture in Textile Composites, Design and Manufacturing of Composites, 4, ,205-212
Toshiko Osada, Asami Nakai, Hiroyuki Hamada
2002.09
Fabrication and Mechanical Property of Long Fiber Reinforced Thermoplastic Composites using Braiding Technique, Design and Manufacturing of Composites, 4, ,221-228
Asami Nakai, Hiroyuki Hamada, Dai Nakaami
2002.09
Fabrication and Mechanical Properties of Textile Reinforced SMC, Design and Manufacturing of Composites, 4, ,229-236
Asami Nakai, Hiroyuki Hamada, Takeshi Ohkawa
2002.09
Environmental Effects on E-Glass and C-Glass Fiber Reinforced Vinylester Composites, Design and Manufacturing of Composites, 4, ,429-436
The Effect of Heat Sealing Temperature on the Properties of OPP/CPP Heat Seal.I.Mechanical Properties, Journal of Applied Polymer Science, Vol.97,No.3,P753-760
Tetsuya Tsujii, U. S. Ishiaku, Machiko Mizoguchi, Hiroyuki Hamada
2005.12
Axial Crushing Performance of Braided Composite Tubes, International Journal of
Masanori Okano, Asami Nakai, Hiroyuki Hamada
2005.05
Crashworthiness, 10,3,287-293 The Effect of Crosslinking on the Mechanical Properties of PLA/PCL Blend, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 2423-2427
Takeshi Semba, Kazuo Kitagawa,Umaru Semo Ishiaku and Hiroyuki Hamada
2005.04
Mechanical Properties of Textile-inserted PP/PP Knitted Composites., Annual Technical Conference on Society of Plastic Engineers 2005, 1554-1558
Omar A. Khondker, Xinyu Yang , Nobuhiro Usui, Asami Nakai1 and Hiroyuki Hamada
2005.05
Effect of Heat Sealing Temperature on the Fracture Aspects of OPP/CPP Seal., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 1075-1079
U. S. Ishiaku, Yasuo Hashimoto, Tsujii Tetsuya, Hiroyuki Hamada
2005.05
Subject, etc. Author Publisher Year / Month
Properties of Injection Molded Amorphous Polymer for Punching., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 1871-1875
Cellular Anisotropy in Mechanical Properties of Polyurethane Foam., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 1780-1783
Akihiko Goto, Kazumi Yamaguchi, Umaru S. Ishiaku & Hiroyuki Hamada
2005.05
Analysis of Interface of Two Layer Molded Product by Simultaneous Composite Injection Molding., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 2208-2212
Shingo Asai, Shinichi Hadehara and Hiroyuki Hamada
2005.05
Evaluation of Adjacent Flow Weldline in Koji Yamada, Kiyotaka 2005.05
PC/ABS., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 791-795
Hygrothermal Aging of Recycled-PET Sandwich Injection Moldings., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 3200-3203
Y. W. Leong, X. Yang, S. Nagata, N. Kunimune, H. Hamada
2005.05
Hygrothermal Aging of Glass and Carbon Fiber Reinforced Nylon 6 Sandwich Injection Moldings., Annual Technical Conference on Society of Plastic Engineers 2005, 1509-1513
Y. W. Leong, U. S. Ishiaku, H. Hamada
2005.05
Mechanical Properties of Square Braided Fabric, Proceedings of ASME International Mechanical Engineering Congress & Exposition, 1-5
Fabrication and Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method, Journal of Polymers and the Environment, 13,2,115-126
Omar A. Khondker, Umaru S. Ishiaku, Asami Nakai and Hiroyuki Hamada
2005.04
Fracture Toughness Evaluation of Adjacent Flow Weld Line in Polystyrene by the SENB
Koji Yamada,Kiyotaka Tomari, Umaru Semo Ishiaku,HiroyukiHamada
2005.04
Subject, etc. Author Publisher Year / Month
Characterization of Knitted Fabric Reinforced PP/PP and GF/PP Composites, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 5-9
Effect of Molecular Weight on the Interfacial Properties of GF/PP Injection Molded Composites, Annual Technical Conference on Society of Plastic Engineers 2006, 173-177
H. Okumura, R. Yoshida, U. S. Ishiaku, A. Nakai, H. Hamada
2006.05
Mechanical Properties of PP/PA/GF Blend Thermoplastics, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 182-185
Fracture Characteristics of CF and GF Reinforced PA6 Sandwich Moldings, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 680-684
S. Solomon,Y. W. Leong, Z. A. Mohd, U. S. Ishiaku, H. Hamada
2006.05
Interfacial Characteristics in Film Insert Molded PC/ABS and PC Film, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 741-745
Y. W. Leong, S. Yamaguchi, U. S. Ishiaku, H. Hamada
2006.05
Evaluation of Weldline in Polycarbonate by Laser Raman Spectroscopy, Annual Technical Conference on Society of Plastic Engineers 2006, 1108-1112
Koji Yamada, Kiyotaka Tomari, Umaru Semo Ishiaku, Hiroyuki Hamada
2006.05
Effect of Specimen Thickness on PC/ABS
Spiral Flow Injection Moldings, Annual Technical Conference on Society of Plastic Engineers 2006, 1123-1127
N. O-Charone, S. Pivsa-Art, Y. W. Leong, K. Umemura, M. Kotaki, H. Hamada, Shigeyoshi Matubara, Asami Nakai and Hiroyuki Hamada
2006.05
In Mold Punching -Processing and Mechanical Properties, Annual Technical Conference on Society of Plastic Engineers 2006, 1205-1209
Interfacial Characteristics in Film Insert Molded PC/ABS and PC Film, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 741-745
Y. W. Leong, S. Yamaguchi, U. S. Ishiaku, H. Hamada
2006.05
Influence of Compounding Conditions on Mechanical Properties of Recycled
Poly(Ethylene Terephthalate), Annual Technical Conference on Society of Plastic Engineers 2006, 1455-1458
Influence of PC-oligomer Content in PC/ABS Blend Injection Moldings, Annual Technical Conference on Society of Plastic Engineers 2006, 2150-2153
Sungeon Kim, Kazutoshi Umemura, Toshihiro Yoshida, Masaya Kotaki and Hiroyuki Hamada
2006.05
Effect of Compounding Procedure on Mechanical Properties of PLA/PCL Blends, Annual Technical Conference on Society of Plastic Engineers 2006, 2159-2163
Takeshi Senba, Kazuo Kitagawa, Umaru Semo Ishiaku and Hiroyuki Hamada
2006.05
Effect of Heat-Sealing Temperature and Holding Time on Mechanical Properties of Heat-Sealed Poly(Lactic Acid)Films, Annual Technical Conference on Society of Plastic
Fabrication of Composite Pipe with Recycled Polycarbonate and Crushed FRP Products, Annual Technical Conference on Society of Plastic Engineers 2006, 2501-2505
Effect of Surface Treatment on Mechanical Properties of GF/Phenol Composite, Annual Technical Conference on Society of Plastic Engineers 2006, 2811-2815
The Effect of Crosslinking on the Mechanical Properties of Polylactic Acid/ Polycaprolactone Blends, Journal of Applied Polymer Science, 101, ,1816-1825
Future-applied Conventional Technology, Engineering and Science, Design, Manufacturing and Applications of Composites, 297-299
H. Hamada, A. Nakai, Naokazu Miyamoto
2006.08
Degradation Behavior of Natural Fiber Filled Composites, Design, Manufacturing and Applications of Composites, 300-304
S. Toyoyama, S. Sahoo, M. Kotaki, A. Nakai, U. S. Ishiaku H. Hamada
2006.08
Proposal of Design Method for GFRP Pipe using SMC, Design, Manufacturing and Applications of Composites, 336-342
E. Kitagawa, A. Nakai, H. Hamada
2006.08
Nondestructive Inspection Using Ultrasonic of Degraded GFRP, Design, Manufacturing and Applications of Composites, 423-431
K. Sugimoto, Y. Fujii, A. Nakai, H. Hamada
2006.08
Sandwich Injection Molding of Polypropylene and Biodegradable Polymer, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2375-2377
Distribution of Minor Phase Components and Its Influence on the Film-Substrate Interface in Film Insert Moldings, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 752-759
Y. W. Leong, H. Hamada 2007.05
Evaluation of Oriented Polypropylene/Cast Polypropylene Film at the Heat-Sealing Part and the Edge, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 1010-1013
Effect of Cell Shape on Mechanical Properties of Polyurethane Foams Molded under Several Conditions, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 1483-1487
Mechanical Properties and Morphology of PMMA Grafted Silica/PMMA Injection Molded Composites, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2000-2004
Effect of Molding Conditions on Morphology and Structure of Recycled-Pet, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2272-2275
T. Ohta, Y. W. Leong, K. Yamada, H. Hamada
2007.05
Hierarchical Structure Developed in PC/ABS Closed Spiral Flow Injection Molding, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2375-2377
N. O-Charoen, Y. W. Leong, M. Kotaki, H. Hamada
2007.05
Dynamic Mechanical, Thermal and Fracture Toughness Properties of PC/ABS Blend System with Incorporation of PC-Oligomer, Annual Technical Conference on Society of
T. Uemura, S. Kim, Y. W. Leong, O. B. Ogazi, K. Yamada, H. Hamada
2007.05
Plastic Engineers 2007, 2370-2374 Effect of Fiber Content and Alkali treatment on the Mechanical and Morphological Properties of Poly(lactic acid)/Poly(caprolactone)Blend jute Fiber-Filled Biodegradable Composites, Journal of Biobased Materials and Bioenergy, 1,1,78-86
U. S. Ishiaku, X. Y. Yang, Y. W. Leong, H. Hamada, T. Semba, K. Kitagawa
2007.04
5) ผลงานทางสังคม
2000 : Chairman 3rd joint Canada-Japan Workshop on Composites
1998 : Chairman 4th International Symposium of TEXCOMP
รูปที่ 1 Prof. Hiroyuki HAMADA สอนหัวขอ “Polymer composites”, 2009
รูปท่ี 2 Prof. Hiroyuki HAMADA เขารวมงาน Rajamangala University of Technology International Conference, “Science and Technology Development in Creative Economy”, Convention Center, Chulaborn Research Institute,
Bangkok, Thailand : 24-26 November 2010
รูปท่ี 3 Prof. Hiroyuki HAMADA สอนหัวขอ “Polymer composites”, 2010