83 82 All-rounders for exacting demands. 3 work steps, 1 machine. In other words: cutting, splitting, loading – no big deal for the 7 models of the Spaltfix range. The hydraulic belt and the tight grip of the advance system move the logs under the knife where they are cut into small, handy logs. From there they are moved on for splitting: depending on the model, the logs can be split into 18 parts. And in the end, the timber is transported off via the conveyor belt. Very simple: cut- ting, splitting, loading – done! Spaltfix SPALTFIX 280-10t SPALTFIX 3000-12t SPALTFIX 3100-12t SPALTFIX 3200-15t LONGITUDINAL & CROSS CONVEYORS FOR SPALTFIX 3000, 3100 & 3200 SPALTFIX K-3800-18t SPALTFIX K-4000-22t LONGITUDINAL & CROSS CONVEYORS FOR SPALTFIX K-4000 SPALTFIX K-5000-36/41t
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
8382
All-rounders for exacting demands. 3 work steps, 1 machine.
In other words: cutting, splitting, loading – no big deal for the 7 models of
the Spaltfix range. The hydraulic belt andthe tight grip of the advance system move
the logs under the knife where they are cutinto small, handy logs. From there they are
moved on for splitting: depending on the
model, the logs can be split into 18 parts.And in the end, the timber is transported
off via the conveyor belt. Very simple: cut-ting, splitting, loading – done!
max. timber diameter 28 cm 30 cm 30 cm 32 cm 32 cm 40 cm 40 cm 50 cm
Sawing system saw blade 700 mm Ø saw blade 750 mm Ø saw blade 750 mm Ø saw blade 800 mm Ø saw blade 800 mm Ø SuperCut chain saw 75 cm SuperCut chain saw 75 cm SuperCut chain saw 75 cm
Saw blade • • •Widia saw blade • •Splitting power 10 t 12 t 12 t 12 t 15 t 22 t 22 t 36/41 t
max. number of billets 6 8 8 8 12 15 15 18
maximum billet lenght 50 cm 50 cm 50 cm 50 cm 50 cm 50 cm 50 cm 50 cm/100 cm
recommended operating hours / year up to 500 hours/year up to 500 hours/year up to 500 hours/year up to 500 hours/year up to 500 hours/year up to 500 hours/year up to 2.500 hours/year up to 2.500 hours/year
Hydraulic timber feed in basic model conveyor belt, 2 m conveyor belt, 2 m conveyor belt, 2 m conveyor belt, 2 m conveyor belt, 2 m rollers 2 rollers gripper advance
Operation single handed single handed one-hand joy stick control one-hand joy stick control one-hand joy stick control tow-hand joy stick control tow-hand joy stick control tow-hand joy stick control
Spaltfix 280-10t Spaltfix 3000-12t Spaltfix 3000-12t Comfort Spaltfix 3100-12t Spaltfix 3200-15t Spaltfix K 3800-18t Spaltfix K 4000-22t Spaltfix K 5000-36/41t
Spaltfix 3000-12t
Spaltfix 3100-12t
Spaltfix 3200-15t
Spaltfix K 3800-18t
Spaltfix K 4000-22t
Spaltfix K 5000-36/41t
hydr. longitudinal-cross-chain conveyor
hydr. longitudinal-cross-chain conveyor
hydr. longitudinal-cross-chain conveyor
hydr. longitudinal-cross-chain conveyor
8786
P
TYPE DESCRIPTION
Spaltfix 280-10t
The semi-automatic firewood cut-splitterSpaltfix 280 by Posch with its splitting powerof 10t cuts and splits timber in diametersup to 28 cm, producing two, four or six pie-ces. With the lifting mechanism, no effortis required when hoisting logs onto the tim-ber support. The hydraulic conveyor beltthen transports the timber to the 700 mm Øsaw blade. The 4m conveyor belt (optional)then transports the finished billets to thepoint of loading. The Spaltfix 280 is alsoavailable as a “Turbo” model. In this ver-sion, a larger hydraulic pump provides a 30 % higher splitting speed.
ARTICLE NO.
M3655 280Z
Driven by tractor, oil pump 38/80 l/min at 480 rpm, splitting speed 13/26 cm/s (splitting power 10/5 t), return speed: 24 cm/s, power consumption 13 kW, universal joint-shaft required, weight: ca. 800 kg
M3675 280ZE11
Driven by tractor, power consumption, 13 kW and driven by an 11kW electric motor, splitting speed and return speed identical to 280 Z, weight: ca. 900 kg
Spaltfix 280 TURBO
M3657 280ZTURBO
Driven by tractor, oil pump 49/103 l/min at 480 rpm splitting speed 17/34 cm/s (splitting power 10/5 t), return speed: 31 cm/s, power consumption 15 kW, universal joint-shaft required, weight: ca. 800 kg
M3677 280ZE11 TURBO
Driven by tractor, power consumption 15 kW and driven by an 11kW electric motor, splitting and returnspeed identical to 280 Z TURBO, weight: ca. 900 kg
WHM
Circular sawblade
Surcharge for special hard metal circular saw blade(art.no. Z1300 0103) Ø 700 mm, instead of the standard circular saw blade Advantage: 50 % higher cutting performance with hard wood; more quiet operation
WHM
Circular sawblade
Surcharge for special hard metal circular saw blade(art.no. Z1300 0103) Ø 700 mm, instead of the standardcircular saw blade. Advantage: 50 % higher cutting performance with hard wood; more quiet operation.
Splitting knife für 6 billets (F0001916)
Accessory parts for Spaltfix 280
F0001916 Splitting knife for six billets
F0001917 Splitting knife for four billets (standard)
Z1300103 Widia saw blade 700 mm, 84 teeth
Z1300080 Circular saw blade KV 700 mm (standard), 56 teeth
F0001914 Push-on set of lights
F0002137 Connector for chip suction unit Ø 100 mm
Z2000637 Walterscheid universal-joint shaft
Accessory parts – timber feeding equipment – for Spaltfix 280
F0001904 Timber support with lifting device incl. load clamping valve (support preparation “H” required)
DESCRIPTIONARTICLE NO.
Special equipment for Spaltfix 280 Note! Available only for original equipment at initial delivery; incl. assembly!
F0 Prepared for installation of conveyor belt (valve block and pipework)
H Hydraulic package for attaching timber support stand with lifting device
Hydraulic package for attaching longitudinal and cross conveyors or timber support (option “H” included)
T Tractor chassis, rigid axle for 10 km/h Austria / 6 km/h Germany, drawbar eye Ø: 38 mm, support wheel; no lights
Advantagesat a glance
cuting, splitting and loading of timber up to 28 cm Ø up to 6 billets in one go
simple timber feed thanks to hydraulic timber advance
tested safety
Spaltfix 280 with conveyor belt (accessory) in operation. The timber support lifting device can be transported with the machine.
The height of the splitting knife can be easily adjusted by hand
F15 Conveyor belt, 1.5 m long, hydraulic drive
The core of Spaltfix 3000: Manual timber retainer 700 mm Ø saw bladeAdjustable timber stop The piston thrusts the wood against the double-edged splitting knife with a power of 10t
1
2
3
4
1
2
3
4
Technical features
Maximum timber diameter 28 cmChromium alloy saw blade KV Ø 700 mm Splitting power 10 t & “Autospeed” functionFor a maximum of 6 billets up to 50 cm longRecommended for up to 500 machine operating hours/yearHydraulic timber feed with 2 m conveyor belt Drive options: electric motor, pto drive Manual saw blade advance Individual control Splitting knife adjustment by handTimber retainer operated by hand4-way plug-in knife Transportation with three-point linkageDischarge belt optional
DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
SP
EC
IA
L
SP
EC
IA
LS
PE
CI
AL
SP
EC
IA
L
TYPE DESCRIPTIONARTICLE NO.
SP
EC
IA
L
Timber retainer and saw blade are operated by means of the ergonomic manual advance
standard
8988
Spaltfix 3000-12t
Efficient preparation of firewood with thesemi-automatic Spaltfix 3000 with a split-ting power of approx. 12 t. Cuts and splitslong timber up to 30 cm Ø in one go into 2,4, 6 or 8 parts. A 2 m, hydraulically poweredtimber advance belt feeds the wood to the750 mm Ø saw blade. The adjustable tim-ber stop retracts during cutting, thereby pre-venting the log from jamming.
Accessory parts for Spaltfix 3000
F0001864 Extension for intake belt, with roller, 1 m
F0001898 Tank heater 230V
F0001763 Connector for chip suction unit Ø 100 mm
F0001914 Push-on set of lights
Z1300107 Widia saw blade 750 mm
Z1300110 Circular saw blade CV 750 mm (standard)
Z2000637 Walterscheid universal-joint shaft
F0001826 Splitting knife for six billets (SKR Ø 100-300 mm)
F0001832 Splitting knife for eight billets (SKR Ø 170-300 mm)
F0001833 Splitting knife for four billets (standard) (SKR Ø 0-300 mm)
M3850 3000Z
Driven by tractor, oil pump 56/118 l/min at 480 rpm, splitting speed 18/39 cm/s (splitting power 12/5 t), return speed: 35 cm/s, power consumption 20 kW, universal joint-shaft required, weight: ca. 1.000 kg
WHM
Circular sawblade
Surcharge Surcharge for special hard metal circular saw blade(art.no. Z1300107) Ø 750 mm, instead of the standard circular sawblades. Advantage: 50 % higher cutting performance with hardwood; more quiet operation; special equipment for Spaltfix 3000
M3870 3000ZE15
Driven by tractor, power consumption 20 kW and driven by a 15 kW electric motor, splitting and returnspeed identical to 3000 C+Z weight: ca. 1.150 kg
Special equipment for Spaltfix 3000 Note! Available only for original equipment at initial delivery; incl. assembly!
F0 Prepared for installation of conveyor belt (valve block and pipework)
F40 Conveyor belt, 4 m, long, hydraulic drive, ejection height 2.5 m
F50 Conveyor belt, 5 m, hydraulic drive, ejection height 3 m
Q Preparation for cross conveyor (valve block and pipework)
F0002179 Hour counter electric drive, 400 V
F0002251 Hour counter Z, ZE-drive (Reed contact)
CComfort
Surcharge for Convenience package consisting of hydraulic blade setting unit, single-handed joystick control for feeder belt (forward/return), saw blade advance und split triggering mechanism
For longitudinal and cross conveyors see timber feeding equipment on page 94
T Tractor chassis, rigid axle for 10 km/h Austria/6 km/h Germany, immobilisation brake, drawbar eye Ø: 38 mm, support wheel, no lights
The Spaltfix 3000, for forestry and farming as well as commercial users, offers extremely attractive price/performance ratio (conveyor belt optional).
The two-way splitting knife for 6 parts (F000 1826)
Single-handed joystick control (Convenience package)
Manual operation of the timber retainer in front of the saw blade
Advantagesat a glance
cutting, splitting and loading of timber up to 30 cm Ø
up to 8 billets in one go
simple timber feed thanks to hydraulic timber advance
ease of operation due to hydraulicsaw blade advance
Convenience package for convenient operation
tested safety The core of Spaltfix 3000: Timber retainer 750 mm special hard-metal saw blade with hydraulic advance Timber stop retracts to prevent wood from jamming The piston thrusts the wood against the double-edged splitting knives with a splitting power of 12t
1
2
3
4
1
2
3
4
F15 Conveyor belt, 1. m long, hydraulic drive, ejection height 1.1 m
SKR = splitting knife range for centred splitting
Technical features
Maximum timber diameter 30 cm Chromium vanadium saw blade Ø 750 mmSplitting power 12 t & “Autospeed” functionFor max. 8 billets up to 50 cm long Recommended for up to 500 operating hours/yearHydraulic timber advance with 2 m conveyor belt Drive options: electric motor, pto driveHydraulic saw blade advance Stop retracts mechanically 4-way plug-in knife Transportation with three-point linkage Discharge belt optional
Convenience package:
Hydraulic retraction of stop
Single-handed joystick control
Hydraulic adjustment of splitting knife TYPE DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
SP
EC
IA
LS
PE
CI
AL
SP
EC
IA
L
standard
9190
Spaltfix 3100-12t
Special equipment “S” for Spaltfix 3100 Special
Spaltfix 3100 with pto drive / electric motor
Accessory parts for Spaltfix 3100 Note! The basic machine comes without splitting knife. Please select the splitting knives required.
F0001730 Extension for intake belt, with roller, 1 m
F0001735 Knife-changing device
F0002105 Splitting knife for four billets (SKR Ø 180-320 mm)
F0002111 Splitting knife for six billets (SKR Ø 180-320 mm)
F0002112 Splitting knife for eight billets (SKR Ø 200-320 mm)
Z1300121 Widia saw blade (Ø 800 mm), Ø 32 cm max.
F0001631 Push-on set of lights
F0001763 Connector for chip suction unit Ø 100 mm
C
F0001866 Tank heater 230 V
Z2000637 Walterscheid universal-joint shaft
M7800 3100Z
Driven by tractor, oil pump 56/118 l/min at 480 rpm,splitting speed: 18/39 cm/s (splitting power: 12/5 t)return speed: 35 cm/s, power consumption: 20 kW, universal-joint shaft required, weight approx. 1400 kg
M7810 3100E15Driven by 15 kW 400 V electric motor, CEE plug 32 A, splitting and return speed identical to 3100Z, weight approx. 1500 kg
M7820 3100ZE15Driven by tractor, power consumption 20 kW and drivenby 15 kW electric motor, splitting and return speed identical to 3100Z, weight approx. 1550 kg
S Surcharge for higher machine specification with dual cutter frame
F0002124 2-way (SKR Ø 0-200 mm), 4-way (S SKR Ø 0-250 mm), 6-way (SKR Ø 150-320 mm) splitting knife, Special
Special equipment for Spaltfix 3100 Applies for articles no. M7800, M7810 and M7820.Note! Available only for original equipment at initial delivery; incl. assembly!
T Tractor chassis, rigid axle for 10 km/h Austria / 6 km/h Germany, immobilisation brake, drawbar eye Ø: 38 mm, support wheel; no lights
F50 Conveyor belt 5 m long, hydraulic drive, for stationary machines only
F40 Conveyor belt 4 m long, hydraulic drive, for stationary machines only
Spaltfix 3100 with 12 t splitting power and“Autospeed” for the most exacting demands.Cuts and splits timber up to a diameter of 32 m in one go into 2, 4, 6 or 8 billets. Longi-tudinal and cross conveyors feed the tim-ber to be cut to the machine. An automaticmechanism for retaining the log, mountedin front of the 800 mm saw blade, ensuresa firm hold and smooth cutting. A conveyorbelt then transports the wood off for loading.
Automatic gripping-retaining mechanism
Oil cooler
Cutting, splitting and loading – all in one cycle of operation: Spaltfix 3100 with longitudinal and cross conveyors in use
Single-handed joystick control for Spaltfix 3100 and 3200
Advantagesat a glance:
cutting, splitting and loading of timber up to Ø 32 cm in one cycle into up to 8 billets
convenient timber feed thanks to hydraulic advance
ease of operation thanks to hydraulic saw blade advance
stop retracts hydraulically to prevent timber from jamming
central control of the machine
hydraulic tilting device ensures optimised timber transfer from cutting to splitting
tested safety
Exchange of knife made easy thanks to knife-changingdevice F000 1735
Technical features
Maximum timber diameter 32 cm
Widia saw blade Ø 800 mm
Splitting power 12 t & “Autospeed”
function
For a maximum of 8 billets of 50 cm long
Recommended for up to 500 operating
hours /year
Hydraulic timber feed with 2 m
conveyor belt
Drive options: electric motor, diesel
motor, pto drive
Hydraulic saw blade advance
Stop retracts hydraulically
Single-handed joystick control
Splitting knife adjusted hydraulically
Basic model equipped with all the
available hydraulic options
Hydraulic gripper-retainer
Hydraulic tilting device
Transportation with three-point
linkage
Discharge belt optional
SKR = splitting knife range for centred splitting
SKR = splitting knife range for centred splitting
F16 Conveyor belt 1.6 m long, hydraulic drive,for stationary machines only
The core of Spaltfix 3100 and 3200: Automatic gripping-retaining mechanism800 mm hard-metal saw blade “Special” with hydraulic advanceTimber stop retracts to prevent timber from jammingThe piston thrusts the wood against the double-edged splitting knives with a splitting power of 12t
1
2
3
4
1 2
3
4
For longitudinal and cross conveyors see timber feeding equipment on page 94.
TYPE DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
SP
EC
IA
LS
PE
CI
AL
SP
EC
IA
L
DESCRIPTIONARTICLE NO.
SP
EC
IA
L
standard
9392
Spaltfix 3200-15t Accessory parts for Spaltfix 3200Note! The basic machine comes without splitting knife. Please select the splitting knives required!
F0001730 Extension for intake belt, with roller, 1 m
F0001735 Knife changing device
F0002105 Splitting knife for 4 billets (SKR Ø 180-320 mm)
F0002111 Splitting knife for 6 billets (SKR Ø 180-320 mm)
F0002112 Splitting knife for 8 billets (SKR Ø 200-320 mm)
F0002106 Ring splitting knife for 12 billets (SKR Ø 240-320 mm)
Z1300121 Widia saw blade (Ø 800 mm), Ø 32 cm max.
F0001631 Push-on set of lights
F0001763 Connector for chip suction unit Ø 100 mm
F0001866 Tank heater 230 V
Z2000653 Walterscheid universal-joint shaft
M7805 3200Z
Driven by tractor, oil pump 65/145 l/min at 480 rpm,splitting speed: 17/38 cm/s (splitting power: 15/6 t) return speed: 31 cm/s, power consumption: 25 kW, universal-joint shaft required, weight approx. 1475 kg
DESCRIPTIONARTICLE NO. TYPE
M7815 3200E22 Driven by 22 kW 400 V electric motor, CEE plug 63 A, splitting and return speed identical to 3200Z, weight approx. 1525 kg
M7825 3200ZE22Driven by tractor, power consumption 25 kW and drivenby 22 kW electric motor, splitting and return speed identical to 3200Z, weight approx. 1575 kg
Special equipment for Spaltfix 3200Applies for articles no. M7805 to M7825. Note! Available only for original equipment at initial delivery; incl. assembly!
T Tractor chassis, rigid axle for 10 km/h Austria / 6 km/h Germany, immobilisation brake, drawbar eye Ø: 38 mm, support wheel; no lights
F50 Conveyor belt 5 m long, hydraulic drive, for stationary machine only, ejection height 3 m
F40 Conveyor belt 4 m long, hydraulic drive, for stationary machine only, ejection height 2.5 m
KF40 4 m foldable conveyor belt, ejection height 2.5 m
KF50 5 m foldable conveyor belt, ejection height 3 m
The powerful Spaltfix 3200 with its splittingpower of 15t and “Autospeed” function forefficient firewood preparation cuts andsplits timber up to a diameter of 32 cm in-to up to 12 billets in one cycle. Cutting lengthadjustable from 20 cm to 50 cm. For safetypurposes, the timber is automatically clam-ped down and held hydraulically. After spit-ting, the conveyor belt ensures automaticremoval of the billets. The sloping conveyorbelt may simply be folded in toward the machine, making it easy to transport.
Cutting, splitting and loading – all in one cycle of operation: Spaltfix 3100 with longitudinal and cross conveyors in use
The integrated oil cooler (standard) protects the hydraulicsystem
Advantagesat a glance
The ring knife in special design (6 to 12-way) splits timberinto up to 12 billets (F000 2128)
Special equipment “S” for Spaltfix 3200 Special
S Surcharge for higher machine specification with dual cutter frame
Maximum timber diameter 32 cmWidia saw blade Ø 800 mmSplitting power 15 t & “Autospeed” functionFor a max. of 12 billets of up to 50 cm longRecommended for up to 500 operating hours /yearHydraulic timber feed with 2 m conveyor belt Drive options: electric motor, diesel motor, pto driveOil cooler for continuous operationHydraulic saw blade advanceStop retracts hydraulicallySingle-handed joystick controlHydraulic adjustment of splitting knifeBasic model equipped with all the available hydraulic optionsHydraulic gripping-retaining mechanismHydraulic tilting deviceTransportation with three-point linkageDischarge belt optional
Single-handed joystick control for Spaltfix 3100 and 3200
The core of Spaltfix 3100 and 3200:1. Automatic gripping-retaining mechanism
2. 800 mm hard-metal saw blade “Special” with hydrau-lic advance3. Timber stop retracts during cutting to prevent timberfrom jamming4. The piston thrusts the wood against the double-edgedsplitting knives with a splitting power of 15t
1
2
3
4
1 2
3
4
SKR = splitting knife range for centred splitting
F16 Conveyor belt, 1.6 m long, hydraulic drive, ejection height 1.1 m, for stationary machine only
cutting, splitting and loading of timber up to a diameter of 32 cm
up to 12 billets in one cycle
convenient timber feed thanks to hydraulic advance
ease of operation thanks to hydraulic saw blade advance
stop retracts hydraulically to prevent timber from jamming
central control of the machine
hydraulic tilting device ensures optimised timber transfer from cutting to splitting
tested safety
For longitudinal and cross conveyors see timber feeding equipment on page 94.
F0002315 Ring splitting knife for 9 billets (SKR Ø 240-320 mm)
DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
SP
EC
IA
LS
PE
CI
AL
SP
EC
IA
L
DESCRIPTIONARTICLE NO.
SP
EC
IA
L
standard
9594
F0002334 Hydraulic roller conveyor4 m4,0 m
Longitudinal and cross conveyors for Spaltfix 3000, 3100 & 3200
Accessory parts - timber feeding equipment - for Spaltfix 3000, 3100, 3200
DESCRIPTIONARTICLE NO. A B C
F0002229 Hydraulic chain conveyor 4 m
F0002227 Hydraulic chain conveyor 2 m
F0002228 Hydraulic chain conveyor 3 m
= length of longitudinal conveyor
= length of cross conveyor
= number of chain strands
A
B
C
2,0 m
3,0 m
4,0 m
F0002141 Cross conveyor 3 m-3x2.2 m (for roller conveyor)2,2 m 3
Accessory parts for mobile longitudinal and cross conveyor for Spaltfix 3000, 3100, 3200
F0001729 Timber support stand H-K-2xQ-2,2 m
F0001894 Timber support stand H-K-2xQ-3,2 m
F0001931 Timber support stand H-K-2xQ-4,2 m
F0001934 Timber support stand H-K-3xQ-4,2 m
F0001932 Timber support stand H-K-3xQ-2,2 m
F0001933 Timber support stand H-K-3xQ-3,2 m
2,0 m 2,2 m 2
2,0 m 3,2 m 2
2,0 m 4,2 m 2
2,0 m 2,2 m 3
2,0 m 3,2 m 3
2,0 m 4,2 m 3
Accessory parts for longitudinal and cross conveyorsstationary model, for Spaltfix 3000, 3100, 3200
F0002257 Timber support stand H-K-2 m-2xQ-2.2 m
F0002258 Timber support stand H-K-2 m-2xQ-3,2 m
F0002235 Timber support stand H-K-2 m-2xQ-4,2 m
F0002225 Timber support stand H-K-3 m-3xQ-2,2 m
F0002236 Timber support stand H-K-3 m-3xQ-3,2 m
F0002261 Timber support stand H-K-2 m-3xQ-4,2 m
F0002262 Timber support stand H-K-3 m-3xQ-4,2 m
F0002259 Timber support stand H-K-2 m-3xQ-2,2 m
F0002260 Timber support stand H-K-2 m-3xQ-3,2 m
F0002264 Timber support stand H-K-4 m-4xQ-4,2 m
Order “Q” together with the basic SP 3000 machine for timber support stands with cross conveyor.
Order “Q” together with the basic machine for timber support stands with cross conveyor.
Useful longitudinal and cross conveyorsfor optimised timber charging, available forSpaltfix 3000, 3100 and 3200. Flexible solu-tions for the most exacting demands. Avai-lable as stationary model or equipped fortransportation.
F0002166 Cross conveyor 3 m-3x3.2 m (for roller conveyor)3,2 m 3
F0002167 Cross conveyor 3 m-3x4.2 m (for roller conveyor)4,2 m 3
Article numbers of timber support stands for the Spaltfix 3000, 3100 and 3200 series in Special design are the same as above, but with an additional “S” (e.g. F000xxxx “S”).
Article numbers of timber support stands for the Spaltfix 3000, 3100 and 3200 series in Special designare the same as above, but with an additional “S” (e.g. F000xxxx “S”).
DESCRIPTIONARTICLE NO. A B C
DESCRIPTIONARTICLE NO. A B C
SP
EC
IA
L SP
EC
IA
LS
PE
CI
AL
9796
Spaltfix K 3800-18t
Spaltfix K-3800 with massive tractor chassis and rollerconveyor in transportation position
The new member of the Spaltfix family: Thesturdy Spaltfix K-3800 cuts and splits tim-ber of diameters up to 38 cm with a split-ting power of 18 t. The twin-pump systemensures fast return movement. Comes stan-dard with roller conveyor and massive trac-tor chassis for mobile application. The 3-in-1 Special knife for 2, 6 or 12 parts canbe adjusted to various diameters; changingsplitting knives for different log diametersis now a thing of the past. Driven by elec-tric motor, tractor or a combination of elec-tric motor and tractor.
PZG-T WF3mM4200T
Driven by tractor, power consumption 20 kW, oil pump 50 l/75 l/min at 380 rpm, splitting speed 11/22 cm/s, splitting power 18/8 t, return speed 31 cm/s, roller conveyor 3 m
E15-T WF3mM4210T
Driven by 15 kW electric motor 400 V, 1x CEE plug 32 A, oil pump 50 l/75 l/min at 1.450 rpm, splitting speed 11/22 cm/s, splitting power 18/8 t, return speed 31 cm/s, roller conveyor 3 m
PZGE15-TWF3mM4220T
One machine - two drive options: • Driven by tractor (technical specifications see M4200T) • Driven by 15 kW 400 V electric motor (technical specifications see M4210T), roller conveyor 3 m
Spaltfix K-3800 with roller conveyor & tractor chassis (standard) and elbow conveyor (optional).
The 3-in-1 Special frame knife for 2, 6, and 12 parts makesadjustment to various diameters possible. No changing ofsplitting knives for different log diameters required.
DESCRIPTIONARTICLE NO. TYPE
SP
EC
IA
L
Advantagesat a glance
cutting, splitting and loading of timber up to Ø 38 cm
hydraulically adjustable Special knife for up to 12 parts per splitting cycle
massive tractor chassis
strandard
Standard roller conveyor incl. log manipulator moves the log to the 75 cm SuperCut chain saw.
1
2
1
22
Technische Merkmale
Maximum timber diameter 38 cm
SuperCut chain saw 75 cm
Splitting power 18 t, twin-pump system
& Autospeed function
For a maximum of 12 billets up to
50 cm length
Recommended for: up to 500 operating
hours/year
Hydraulic timber feed with two intake
rollers
Drive options: electric motor, pto shaft
Hydraulic saw blade advance
Stop retracts hydraulically
Two-hand joystick control
Hydraulic adjustment of splitting knife
Basic model equipped with all the
available hydraulic options
Hydraulic double-gripper
Hydraulic tilting device
Log manipulator
Special design standard
Roller conveyor standard
Tractor chassis (6-10 km/h) standard
Discharge belt optional
F0002651 Splitting knife for 2 parts (SKR Ø 0-220 mm), 4 parts (SKR Ø 0-250 mm), 8 parts (SKR Ø 230-380 mm)
SO561 Option for pto-drive in driving direction
Q2 Cross conveyor 2 x 1.4 m
Special equipment for Spaltfix K-3800
F0002502 Splitting knife for 2 parts (SKR Ø 0-220 mm), 4 parts (SKR Ø 0-320 mm), 8 parts (SKR Ø 300-380 mm)
F0002503Splitting knife for 2 parts (SKR Ø 0-180 mm), 6 parts (SKR Ø 0-320 mm), 12 parts (SKR Ø 300-380 mm), (Ringmesser 210 mm Ø)
Accessory parts for Spaltfix K-3800
KF4 Elbow conveyor 4 m
KF5 Elbow conveyor 5 m
The core of the Spaltfix K-3800: double-gripper with timber diameter display , SuperCut chain saw with 75 cm guidebar length , hydraulic rocking device , that automatically retracts to move the timber into the splitting trough. A powerful piston thrusts the wood against the double-edged splitting knife with a force of 18 t
12 3
4 5
1
2
3
4
5
F0002553 Splitting knife for 2 parts (SKR Ø 0-180 mm), 6 parts (SKR Ø 0-320 mm), 8 parts (SKR Ø 300-380 mm)
DESCRIPTIONARTICLE NO.
SP
EC
IA
L
DESCRIPTIONARTICLE NO.
Z2000654 Walterscheid universal-joint shaft
Z1370101 Guide bar
F0002289 Maintenance kit for chain saw(consisting of 1 bar, 3 chains, 1 drive chain wheel)
Z1350105 Chain
The cross conveyor (Q2) is – as a standard – mounted on the right side, seen in the direction of travel. If you want your cross conveyor mounted on the left side, please indicate this when ordering your equipment.
SP
EC
IA
L
The core of Spaltfix 4000: Double-gripper with timber Ø displayHarvester chain saw with 750 mm guide bar lengthHydraulic rocking device that automatically retracts to move the timber into the splitting troughA powerful piston thrusts the wood against the double-edged splitting knife with a force of 22t
1
2
3
4
5
9998
Spaltfix K 4000-22t
1 2
3
4
5
The powerful Spaltfix K-4000 with its split-ting power of 22 t and “Autospeed” functi-on splits timber up to 40 cm Ø into 4, 6, 8,12 and even 15 billets in one cycle. Logsare fed into the large cutting and splittingarea with all-purpose cross and roller con-veyors (optional). An automatic gripper,with wood diameter display, seizes thewood. A Harvester SuperCut system, achainsaw with 75cm guide bar length and22 kW drive is used for cutting. After cut-ting, the wood moves to the splitting troughwhere a sturdy piston pushes it against thesplitting knife with a force of 22t.
M3750 K-4000-PZG
Driven by tractor, power consumption 50 kW, oil pump 67/144 l/min at 430 rpm,. splitting speed 12/25 cm/s, splitting power 22/8 t, return speed 22 cm, weight approx. 2,900 kg, stationary model
M3780 K-4000 D61
Diesel motor driven D61 kW John Deere, oil pump 67/144 l/min at 1.800 rpm,, splitting speed 12/25 cm/s,splitting power 22/8 t, return speed 22 cm, weight approx. 3.400 kg, stationary model
M3765 K-4000-E30
Driven by 2 x 15 kW 400 V electric motor, 2 x CEE plug 32 A, oil pump 56/120 l/min at 1,450 rpm, splitting speed10/21 cm/s, splitting power 22/8 t, return speed 18 cm,weight approx. 3,000 kg, stationary model
M3760 K-4000-E44
Driven by 2 x 22 kW 400 V electric motor, 2 x CEE plug 63 A, oil pump 67/144 l/min at 1,450 rpm, splitting speed12/25 cm/s, splitting power 22/8 t, return speed 22 cm,weight approx. 3,050 kg, stationary model
M3770 K-4000-PZGE44
Driven by tractor, power consumption 50 kW, oilpump 67/144 l/min at 430 rpm, Driven by 2 x 22 kW400 V electric motor, 2 x CEE plug 63 A, oil pump67/144 l/min at 1,450 rpm, splitting speed 12/25 cm/s,splitting power 22/8 t return speed 22 cm, weight approx. 3,150 kg, stationary model
M3775 K-4000-PZGE30
Driven by tractor, power consumption 50 kW, oil pump67/144 l/min at 430 rpm,, splitting speed 12/25 cm/s, splitting power 22/8 t, return speed 22 cm, driven by 2 x15 kW 400 V electric motor, 2 x CEE plug 32 A, oil pump56/120 l/min at 1,450 rpm,, splitting speed 10/21 cm/s,splitting power 22/8 t, return speed 18 cm, weight approx. 3,100 kg, stationary model
The timber moves on a cross conveyor with chain drive and can be placed on both sides of the machine longitudinal conveying by means of roller drive.
The ring knife splits timber into up to 15 billets (F000 2106)
1
2
1
2
Advantagesat a glance
cutting, splitting and loading of timber up to a diameter of 40 cm
up to 15 billets in one cycle
convenient timber feed thanks to hydraulic advance
stop retracts hydraulically to prevent timber from jamming
central control of the machine
hydraulic tilting device ensures optimised timber transfer from cutting to splitting
log brought into optimum position
tested safety
The conveyor belt may simply be folded in toward the machine (optional).
The log manipulator positions the timber before it is pulledinto the machine.
Special equipment for Spaltfix K-4000 Note! Available only for original equipment at initial delivery; incl. assembly!
F15 One-piece ejection conveyor belt,1.5 m, ejection height max. 1 m / *1.25 m
F40 One-piece ejection conveyor belt 4 m, ejection height max. 2.5 m / *2.75 m
F50 One-piece ejection conveyor belt 5 m, ejection height max. 3 m / *3.25 m
KF40 Foldable conveyor belt, 4 m
KF50 Foldable conveyor belt 5 m
F0002142
SDW4 Straßenfahrwerk 80 km/h inkl. Deichsel und Walzenförderer 4 m
Connector for chip suction unit Ø 100 mm
* for special equipment “S”
F0002152 Connector for chip suction unit Ø 150 mm
F0001866 Tank heater
TDW4Tractor chassis 25 km/h, pneumatic brake, no ABS, incl. 4m roller conveyor, hydraulic feet, control stand can be folded, lights, prepared for installation ofcross conveyor on the right-hand side in transport direction
DESCRIPTIONARTICLE NO. TYPE
DESCRIPTIONARTICLE NO.
SP
EC
IA
L
standard
SP
EZ
IA
L
101100
The wood gripper is fitted with a Ø measurement indicato. This way the splitting knife can be ideally tailored to the wood.
Hydraulic double-gripper
1
2
Special design: hydraulically adjustable splitting knife for 2,6 or 12 billets depending on setting (accessory F0002070)
1 2
Spaltfix K-4000 “Special” with chassis and loading crane (upon request)Two hydraulic draw-in rollers
Technical features
Maximum timber diameter 40 cmSuperCut chain saw 75 cmSplitting power 22 t & “Autospeed” function
For a maximum of 15 billets up to 50 cm longRecommended for up to 2,500 operatinghours/yearHydraulic timber advance with two intake rollersDrive options: electric motor, diesel motor, pto driveOil cooler for continuous operationHydraulic saw blade advanceStop retracts hydraulicallyTwo-hand joystick controlHydraulic adjustment of splitting knifeBasic model equipped with all the available hydraulic optionsHydraulic gripperHydraulic tilting deviceLog manipulatorDischarge belt optional
1
1
1
S
F0002104
F0002122
F0002070
F0002071
F0002072
Accessory parts - Splitting knives for Spaltfix K-4000Note! The basic machine comes without splitting knife. Please select the splitting knives required!
F0001941
F0002088
F0002037
F0001999 Splitting knife 4-way (SKR Ø 230-400 mm)
F0001940 Splitting knife 6-way (SKR Ø 230-400 mm)
F0002069
Z2000655
F0002030
F0002182
DESCRIPTIONARTICLE NO.
DESCRIPTIONARTICLE NO.
Z1370101
Z1350105
F0002289
SP
EZ
IA
LS
PE
ZI
AL
Special equipment „S“ for Special models
Surcharge for higher machine specification with dual cutter frame
Maintenance kit for chain saw(consisting of 1 bar, 3 chains, 1 drive chain wheel)
103102
3 m
3 m
3 m
3 m
3 m
3 m
3 m
D
4 m
F0002406 Cross conveyor 3 m-4x6.0 m6,0 m 4
F0002272 Cross conveyor 3 m-4x2.2 m (for roller conveyor)2,2 m 4
F0002013 Cross conveyor 3 m-3x2.2 m (for roller conveyor)2,2 m 3
F0002211 Cross conveyor 3 m-3x3.2 m (for roller conveyor)3,2 m 3
F0002132 Cross conveyor 3 m-3x4.2 m (for roller conveyor)4,2 m 3
F0002376 Cross conveyor 3 m-4x5.0 m (for roller conveyor)5,0 m 4
F0002412 Cross conveyor 3 m-3x6.0 m6,0 m 3
Longitudinal and cross conveyors for Spaltfix K-4000
Article numbers of timber support stands for the Spaltfix K-4000 series in Special design are the same as above, but with an additional “S” (e.g. F000xxxx “S”).
Note: Order roller conveyor 1 m larger than cross conveyor (see drawing on page 101!)
The efficient longitudinal and cross con-veyors for advanced timber charging arealso available for Spaltfix K-4000. Suitablefor various drive options.
Roller conveyor
Cross conveyor
A combination of roller andcross conveyor for pto, electric,pto/e and diesel drives
A combination of roller and cross conveyor for electric and
diesel drives
Transported towards the machine
Transported towards the machine
= length of roller conveyor
= length of cross conveyor
= number of chain strands
A
B
C
= width of cross conveyorD
1m
F0002215 Metal plates for roller conveyor 3 m, metal plates between the rollers
Accessory parts - timber feeding equipment - for Spaltfix 4000
DESCRIPTIONARTICLE NO. A B C
F0002363 Roller conveyor 5 m, stationary model
F0002067 Roller conveyor 3 m, stationary model
F0002011 Roller conveyor 4 m, stationary model
3,0 m
4,0 m
5,0 m
F0002216 Metal plates for roller conveyor 4 m, metal plates between the rollers
F0002478 Metal plates for roller conveyor 5 m, metal plates between the rollers
F0002362 Cross conveyor 4 m-3x4.2 m4,2 m 3
SO473 Chain cross conveyor 3x1.4 m for FW SDW41,4 m 3
SP
EZ
IA
L
105104
DESCRIPTIONART.-NR.
SO400
SO399
Spaltfix K 5000-36/41t
Advantagesat a glance
cutting, splitting and loading of timber up to a diameter of 50 cm and 25-100 cm length
up to 18 billets in one cycle
convenient timber feed thanks to hydraulic advance
timber does not get jammed due to hydraulic saw blade advance and double gripper
OptiSplit for the highest splitting output
hydraulic tilting device ensures optimised timber transfer from cutting to splitting
log manipulator for optimum positioning of timber
Special equipment for Spaltfix K-500Note! Available only for original equipment at initial delivery; incl. assembly!
SO378 Surcharge for additional chain strand
SO380 Tractor chassis 10 km/h with tandem coach spring unit, braking axle, immobilisation brake, 4 hydr. stands
SO390Tractor chassis for speed up to 25 km/h, with tandem coach spring unit, braking axle with immobilisation brake and pneumatic brake, 4 hydr. stands
SO38180 km/h undercarriage for road transport with tandem unit, parabolaspring unit with weight balance, pneumatic brake with ABS,4 hydraulic stands
SO547 Roof to cover the place of work
SO422Drawbar eye, low, customised, transmission attachment above tow bar. Dimensions of drawbar eye and power take-off according to customer’s specifications
SO376 Cross chain conveyor with hydraulic drive, 3 chain strands - distance 1.3 m or 1.7m, stationary, approx. 1.4 m support area
SO377 Hydraulic revolving mechanism (required for systems with undercarriage)
SO379 Extension for cross conveyor chain, per meter and chain strand (for stationary model only)
Base frame extension 1 m for additional chain strand of 6 m
SO406 Homologation/Type approval
SO384Conveyor belt, 2.5 m long, 1 m wide, belt width: 0.8 m, hydraulic revolving mechanism, driven by hydraulic motor, ejection height at max. inclination of 30°: 1.4m
SO438Conveyor belt, 3.5 long, 1 m wide, belt width: 0.8 m, hydraulic revolving mechanism, driven by hydraulic motor, ejection height at max. inclination of 30°: 1.9 m
SO385Conveyor belt, 5 m long, 1 m wide, belt width: 0.8 m, hydraulic revolving mechanism, driven by hydraulic motor, hydraulic folding, max. conveying angle 30°, ejection height at max. inclination of 30°: 2.6 m
Hydraulic stands with pipework for stationary model. For chassis preparation
SO420 Remote conveyor belt control for tilting the belt and on-off switching, with integrated emergency off key
SO386 Screen, rigid bar frame after the conveyor belt
SO387 Surcharge for stationary machine with 3-way splitting knife holder
SO394 ECO-OIL – filled with PANOLIN Synth 46 300l, an eco-friendly high-tech hydraulic oil
Z1930080 Universal-joint shaft W2500-860 SD25
SO389Conveyor belt, 6 m long, 1 m wide, belt width: 0.8 m, hydraulic revolving mechanism, driven by hydraulic motor, hydraulic folding, max. conveying angle 30°, ejection height at max. inclination of 30°: 3.1 m
Note! The basic machine comes without splitting knife. Please select the splitting knives required (accessories page 106)
For technical features please refer to page 107.
The core of the new Spaltfix K-5000:SuperCut chain saw 75 cmThe piston thrusts the wood against the double-edged splitting knife with a power of 41tEjects waste wood
1
2
3
4
1
2
3
4
IN
DU
ST
RY
M3705 K-5000-PZG90
Driven by tractor via power take-off shaft, power consumption 90 kW, oil pump 90/190 l/min at 430 rpm; forward speed 12/24 cm/s, spitting power 41/20t, return speed 22 cm/s, stationary model
M3742 K-5000-D78
Driven by water-cooled John Deere turbo-diesel motor 78 kW, oil pump 90/190 l/min at 1800 rpm, forward speed 12/24 cm/s, splitting power 36/17t, return speed 22 cm/s stationary model
M3715 K-5000-1xE30/1xE45
Driven by tractor or two electric motors of 1x30 kW, 1x45 kW, oil pump 90/190 l/min at 1500 rpm, forwardspeed 12/24 cm/s, splitting power 41/20t, return speed 22 cm/s, stationary model
M3712 K-5000- 2xE30
Driven by tractor or two electric motors of 30 kW each (splitting power 36t - 15% slower compared toM3715), oil pump 74/147 l/min at 1500 rpm, forward speed 9/19 cm/s, splitting power 36/17t, return speed 18 cm/s, stationary model
M3745 K-5000- D100
Driven by water-cooled John Deere turbo-diesel motor 100 kW, charge-air cooling, electronic injection,diagnosis unit, automatic speed reduction, oil pump90/190 l/min at 1800 rpm [PARA] forward speed 12/24 cm/s, splitting power 41/20t, return speed 22 cm/s, stationary model
The latest development of the Spaltfix ge-neration: Spaltfix K-5000 with 41 t or 36 tsplitting power (for diesel 78 kW or elec-tric drive 2x30 kW). The new horizontal split-ter meets every demand when it comes toprofessional firewood preparation. Logsare advanced more quickly, so that cycletimes are shorter and the hourly output ishigher. The new „OptiSplit“-System, sys-tem ensures optimum splitting performance.The splitting stroke is automatically adju-sted to the billet length. Infinitely adjusta-ble cutting lengths (hydraulic adjustment)make work even more efficient. The logmanipulator in the draw-in area helps toposition the log correctly. The useful joy-stick control, automatic diameter displayand a 30l chain oil tank for the centralisedlubrication system make the offer complete.
The new Spaltfix K-5000 with “OptiSplit” system for optimum splitting performance
Accessory parts for Spaltfix K-5000
F0002379 Tank heater 230 V
DESCRIPTIONARTICLE NO. TYPE
Z1350105 Chain
Z1370101 Guide bar
F0002289 Maintenance kit for chain saw(consisting of 1 bar, 3 chains, 1 drive chain wheel)
DESCRIPTIONARTICLE NO.
IN
DU
ST
RY
IN
DU
ST
RY
107106
Technical features
Maximum timber diameter 50 cm
SuperCut chain saw 75 cm
Splitting power 36/41 t & “Autospeed”
function
OptiSplit: automatic splitting stroke
adjustment for optimum performance
For a maximum of 18 billets up
to 50 cm long
Recommended for up to 2,500 operating
hours/year
Hydraulic chain conveyor
Drive options: electric motor, diesel
motor, pto drive
Oil cooler for continuous operation
Hydraulic chain saw advance
Stop retracts hydraulically
Two-handed joystick control
Hydraulic adjustment of splitting knife
Basic model equipped with all the avai
lable hydraulic options
Hydraulic double gripper
Hydraulic tilting device
Log manipulator
Option for metre-long logs and ejection
of waste wood
Foldable conveyor belt optional
F0001680 “Special” ring knife 250, 15 parts, ideal for timber Ø 290 mm to 450 mm
F0001678 Standard knife, 4 parts, ideal for timber Ø 130 mm to 190 mm
Splitting knives: Spaltfix K-5000, SplitMaster 35t Special
F0001674 Standard knife, 6 parts, ideal for timber Ø 170 mm to 270 mm
F0001694 Standard knife, 8 parts, ideal for timber Ø 180 mm to 300 mm
F0001679 “Special” ring knife 210, 12 parts, ideal for timber Ø 250 mm to 390 mm
F0001672 “Special” ring knife 250, 18 parts, ideal for timber Ø 290 mm to 450 mm
F0001673 “Special” ring knife 300, 18 parts, ideal for timber Ø 330 mm to 500 mm
The new Spaltfix K-5000 with cross conveyor and conveyor belt (optional equipment)
Hydraulically adjustable cutting lengths plus the new OptiSplit system, where the splitting stroke is automatically adjustedto the billet length, ensure the highest possible output.
Timber advance by means of double gripper with retainer and log manipulator .
The new Spaltfix K-5000 is controlled by means of the convenient two-handed joystick control.
11
2
1 2
DESCRIPTIONARTICLE NO.
IN
DU
ST
RY
Abridgement of product catalogue. Technical data, dimensions, depictions of machines as well as
alterations of safety-relevant standards are subject to continued development and as such are not, in
all cases, binding for delivery. All rights reserved. Reproduction - even if only in excerpts - only upon prior