www.icetechworld.com | Dry Ice Technology | Rev7 2017.08.22 | EN Technical Data Dimensions mm/in: Length: 1500 / 59 Width: 1500 / 59 Height: 1800 / 71 Height: 1870 / 74 (incl. ext. legs) Weight: kg: 1925 / lbs: 4244 Rated Output: kg/h: up to 750 lbs/h: up to 1653 of high-quality dry ice pellets, depending on the extruder plate applied Pellet Size Diameter: mm: 3 - 10 or 16 in: 0.11 - 0.39 or 0.62 Inlet Liquid CO 2 Pressure: bar: 16 - 22 psi: 232 - 319 Back Pressure on Revert Gas: bar: 0 - 1 psi: 0 - 14.5 CE Power Supply: 3 x 400 V AC + PE, 50Hz, Imax. 32 A UL Power Supply: 3 x 480 V AC + PE, 60Hz, Imax. 32 A Rated Power: kW: 11 Hp: 15 Noise Level Below 75 dB(A) PR750H Production of High Quality Dry Ice Pellets 3 mm Pellets 10 mm Pellets 16 mm Pellets The IceMaker PR750H can produce two sizes of pellets at the same time. 3 mm Pellets 16 mm Pellets powered by Americas + 1800 337 9423 EMEA +32 (0) 13 53 95 47 Germany +49 (0) 6551 9606-0 Asia-Pacific +81 3 6869 2665 www.coldjet.com www.icetechworld.com
2
Embed
Production of High Quality Dry Ice Pellets - mycoldjet.com sheet-EN-rev7.pdf · | Dry Ice Technology | Rev7 2017.08.22 | EN PR750H Production of High Quality Dry Ice Pellets Height:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ww
w.icetech
world
.com | D
ry Ice Techn
ology | R
ev7 2017.08.22 | EN
Technical Data
Dimensions mm/in:Length: 1500 / 59Width: 1500 / 59Height: 1800 / 71Height: 1870 / 74 (incl. ext. legs) Weight: kg: 1925 / lbs: 4244 Rated Output:kg/h: up to 750lbs/h: up to 1653of high-quality dry ice pellets, depending on the extruder plate applied Pellet Size Diameter:mm: 3 - 10 or 16in: 0.11 - 0.39 or 0.62
Inlet Liquid CO2 Pressure:bar: 16 - 22psi: 232 - 319
Back Pressure on Revert Gas:bar: 0 - 1psi: 0 - 14.5 CE Power Supply:3 x 400 V AC + PE, 50Hz, Imax. 32 A
UL Power Supply:3 x 480 V AC + PE, 60Hz, Imax. 32 A
Rated Power: kW: 11 Hp: 15
Noise Level Below 75 dB(A)
PR750HProduction of High Quality Dry Ice Pellets
3 mm Pellets 10 mm Pellets 16 mm Pellets
The IceMaker PR750H can produce two sizes of pellets at the same time.
If the IceMaker PR750H is connected to your LAN or Internet, the entire display can be transferred to the computer desktop of your choice– anywhere in the world.
This allows online support by using diagnostic software on the industrial PC.
Height: mm: 1150in: 45 (incl. ext. legs)
Height: mm: 1150in: 45 (incl. ext. legs)
795 mm / 31 in
511 mm / 20 in
Floor Characteristics and Minimum Clearance Distanceso The pelletizer must be placed on a horizontal concrete floor with an adequate load-carrying capacity. The pelletizer will be anchored to the floor, which must be free of cracks and structural deficiencies.o The minimum clearance distances must be observed to provide sufficient space for opening the cabinet doors and servicing the pelletizer.
InstallationThe installation of the pelletizer must be carried out by one of Cold Jet’s service technicians, or bya technician approved by Cold Jet.