TMAT1921xB68 TMAT1921xB68-21A 21A | | E15Z01P39 E15Z01P39 Tower Mounted Amplifier, Twin Diplexed PCS/AWS 1–3, 555–894 MHz bypass with AISG General Specifications Product Type 1BTS:2ANT (Diplex) Modularity 2Twin Includes Mounting hardware Electrical Specifications Submodule 1|2 1|2 1|2 Branch 1 2 3 Port Designation 555–894 AWS–PCS AWS–PCS AISG 2.0 Device Subunit E25A01P02 2/4 E25A01P02 1/3 License Band APT 700, Band Pass CEL 850, Band Pass EDD 800, Band Pass LMR 750, Band Pass LMR 800, Band Pass TDD 700, Band Pass USA 750, Band Pass AWS 1700, LNA PCS 1900, LNA Electrical Specifications Rx (Uplink) Frequency Range 1695–1780 MHz 1850–1910 MHz Bandwidth 85.00 MHz 60.00 MHz Gain, nominal 12.0 dB 12.0 dB Gain Tolerance ±1.0 dB ±1.0 dB Noise Figure, typical 1.0 dB 1.3 dB Total Group Delay, maximum 80 ns 150 ns Return Loss, typical 22 dB 22 dB Insertion Loss Bypass Mode, typical 1.3 dB 2.2 dB Return Loss Bypass Mode, typical 16 dB 16 dB TX Band Rejection, minimum 60 dB 60 dB Electrical Specifications Tx (Downlink) Frequency Range 2110–2200 MHz 1930–1990 MHz Bandwidth 90.00 MHz 60.00 MHz Insertion Loss, typical 0.30 dB 0.45 dB Total Group Delay, maximum 15 ns 50 ns Return Loss, typical 22 dB 22 dB RX Band Rejection, minimum 55 dB 45 dB Input Power, RMS, maximum 200 W 200 W Input Power, PEP, maximum 3000 W 3000 W 3rd Order PIM, maximum 155 dBc (relative to carrier) 155 dBc (relative to carrier) 3rd Order PIM Test Method 1 x 20 W AWS CW tone 1 x 20 W PCS CW tone 2 x 20 W CW tones Electrical Specifications, Band Pass Frequency Range 555–894 MHz Insertion Loss, maximum 0.20 dB Insertion Loss, typical 0.10 dB Total Group Delay, maximum 8 ns Return Loss, typical 22 dB Product Specifications Product Specifications ©2016 CommScope, Inc. All rights reserved. All trademarks identified by 2016 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope. or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016 page 1 of 4 page 1 of 4 February 14, 2016 February 14, 2016
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TMAT1921xB68TMAT1921xB68--21A21A | | E15Z01P39E15Z01P39 Tower Mounted Amplifier, Twin Diplexed PCS/AWS 1–3, 555–894 MHz bypass with AISG
General Specifications Product Type 1BTS:2ANT (Diplex) Modularity 2Twin Includes Mounting hardware
Electrical SpecificationsSubmodule 1 | 2 1 | 2 1 | 2Branch 1 2 3Port Designation 555–894 AWS–PCS AWS–PCSAISG 2.0 Device Subunit E25A01P02 2/4 E25A01P02 1/3
License Band
APT 700, Band Pass CEL 850, Band Pass EDD 800, Band Pass LMR 750, Band Pass LMR 800, Band Pass TDD 700, Band Pass USA 750, Band Pass
AWS 1700, LNA PCS 1900, LNA
Electrical Specifications Rx (Uplink)Frequency Range 1695–1780 MHz 1850–1910 MHz Bandwidth 85.00 MHz 60.00 MHzGain, nominal 12.0 dB 12.0 dBGain Tolerance ±1.0 dB ±1.0 dBNoise Figure, typical 1.0 dB 1.3 dBTotal Group Delay, maximum 80 ns 150 nsReturn Loss, typical 22 dB 22 dBInsertion Loss Bypass Mode, typical 1.3 dB 2.2 dB
Return Loss Bypass Mode, typical 16 dB 16 dBTX Band Rejection, minimum 60 dB 60 dB
Electrical Specifications Tx (Downlink)Frequency Range 2110–2200 MHz 1930–1990 MHz Bandwidth 90.00 MHz 60.00 MHzInsertion Loss, typical 0.30 dB 0.45 dBTotal Group Delay, maximum 15 ns 50 nsReturn Loss, typical 22 dB 22 dBRX Band Rejection, minimum 55 dB 45 dBInput Power, RMS, maximum 200 W 200 WInput Power, PEP, maximum 3000 W 3000 W
3rd Order PIM, maximum 155 dBc (relative to carrier)
155 dBc (relative to carrier)
3rd Order PIM Test Method 1 x 20 W AWS CW tone 1 x 20 W PCS CW tone 2 x 20 W CW tones
Electrical Specifications, Band PassFrequency Range 555–894 MHz Insertion Loss, maximum 0.20 dBInsertion Loss, typical 0.10 dBTotal Group Delay, maximum 8 nsReturn Loss, typical 22 dB
Product SpecificationsProduct Specifications
©©2016 CommScope, Inc. All rights reserved. All trademarks identified by 2016 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016
page 1 of 4page 1 of 4February 14, 2016February 14, 2016
Isolation, minimum 60 dBInput Power, RMS, maximum 200 WInput Power, PEP, maximum 3000 W
3rd Order PIM, maximum 155 dBc (relative to carrier)
3rd Order PIM Test Method Two +43 dBm carriers
AISG Electrical Specifications Voltage, AISG Mode 10–30 Vdc Default Protocol AISG 2.0 Protocol AISG 1.1 | AISG 2.0 AISG Carrier 2.176 MHz ± 100 ppm AISG Connector 8pin DIN Female AISG Connector Standard IEC 601309
dc Power/Alarm Electrical Specifications Voltage 7–30 Vdc Voltage, CWA Mode 10–18 Vdc dc Switching/Redundancy Yes Operating Current at Voltage 240 mA @ 12 V Alarm Current, CWA Mode 30–170 mA @ 10–18 V Lightning Surge Current 10 kA Lightning Surge Current Waveform 8/20 waveform
Product SpecificationsProduct SpecificationsTMAT1921xB68TMAT1921xB68--21A | E15Z01P3921A | E15Z01P39
©©2016 CommScope, Inc. All rights reserved. All trademarks identified by 2016 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016
page 2 of 4page 2 of 4February 14, 2016February 14, 2016
Block Diagram
Mechanical Specifications RF Connector Interface 716 DIN Female RF Connector Interface Body Style Long neck Ground Screw Diameter 6.00 mm Color Gray Finish Painted Mount Type Pole | Wall Mounting Pipe Diameter 40–160 mm Mounting Pipe Hardware Band clamps (2)
Dimensions Height 230.0 mm | 9.1 in Width 220.5 mm | 8.7 in Depth 104.0 mm | 4.1 in Weight 8.0 kg | 17.6 lb
Environmental Specifications Operating Temperature 40 °C to +65 °C (40 °F to +149 °F) Relative Humidity Up to 100% Ingress Protection Test Method IEC 60529:2001, IP67
Product SpecificationsProduct SpecificationsTMAT1921xB68TMAT1921xB68--21A | E15Z01P3921A | E15Z01P39
©©2016 CommScope, Inc. All rights reserved. All trademarks identified by 2016 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016
page 3 of 4page 3 of 4February 14, 2016February 14, 2016
Outline Drawing
Product SpecificationsProduct SpecificationsTMAT1921xB68TMAT1921xB68--21A | E15Z01P3921A | E15Z01P39
©©2016 CommScope, Inc. All rights reserved. All trademarks identified by 2016 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 10, 2016
page 4 of 4page 4 of 4February 14, 2016February 14, 2016
Related Documents
