Insulation Low Energy – Low Carbon Buildings CI/Sfb Fourth Issue June 2011 (2–) Rn7 M2 INSULATION FOR ROOFS, WALLS & FLOORS Product Selector Visit our brand new website: www.kingspaninsulation.co.uk
Insulation
Low Energy –Low Carbon Buildings
CI/Sfb
Fourth Issue June 2011
(2–) Rn7 M2
INSULATION FOR ROOFS, WALLS & FLOORS
Product Selector
Visit our
brandnewwebsite:
www.k
ingspanins
ulatio
n.co.u
k
2
Kingspan Insulation Ltd reserves the right to amend product specifications without prior notice.The information contained in the document is given in good faith and applies to the usesdescribed. Recommendations for use should be verified as to the suitability and compliance withactual requirements, specifications and any applicable laws and regulations. Kingspan Insulationrecommend using the Technical Advice service (see back cover).
BreathableM
embranes
CavityClosers
FloorInsulation
WallInsulation
RoofInsulation
3
ContentsPage
Product Selector Chart 4
U–value Time Saver 6
Building Regulations and Standards 7
Roof Insulation 9Kooltherm® K7 Pitched Roof Board 10Thermapitch® TP10 11Thermaroof® TR21 12Thermaroof® TR25 13Thermaroof® TR26 LPC/FM 14Thermaroof® TR27 LPC/FM 15Thermaroof® TR31 16Thermataper® TT46 LPC/FM 17Thermataper® TT47 LPC/FM 18Kooltherm® K11 Roofboard 19Styrozone® N 300 R 20Styrozone® H 350 R 21Styrozone® N 500 R 22Styrozone® N 700 R 23
Wall Insulation 25Kooltherm® K5 External Wall Board 26Kooltherm® K8 Cavity Board 27Kooltherm® K12 Framing Board 28Kooltherm® K15 Rainscreen Board 29Kooltherm® K17 Insulated Plasterboard 30Kooltherm® K18 Insulated Plasterboard 31Thermawall® TW50 32Thermawall® TW55 33Styrozone® N 300 R 20Styrozone® H 350 R 21
Floor Insulation 35Kooltherm® K3 Floorboard 36Kooltherm® K10 FM Soffit Board 37Thermafloor® TF70 38Thermafloor® TF73 39Styrozone® N 300 R 20Styrozone® H 350 R 21Styrozone® N 500 R 22Styrozone® N 700 R 23
Cavity Closers 41Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS 42Thermabate® & Thermabate® PLUS 44
Breathable Membranes 46nilvent® 47
Product Selector
Roof Insulation
Kooltherm®K7PitchedRoofBoard
Thermapitch®TP10
Thermaroof®TR21
Thermaroof®TR25
Thermaroof®TR26LPC/FM
Thermaroof®TR27LPC/FM
Thermaroof®TR31
Thermataper®TT46LPC/FM
Thermataper®TT47LPC/FM
Kooltherm®K11RoofBoard
Styrozone
®N300R
Styrozone
®H350R
Styrozone
®N500R
Styrozone
®N700R
nilvent®
Pitched Roof Insulation
Over / between / underrafter sarking
� �
Breathable membrane �
Flat Roof Insulation
Tapered Roofing System � �
Under partially bondedbuilt–up felt
� � � �
Under cold liquid appliedwaterproofing
� � �
Under mastic asphalt � �
Directly over timber joists �
Under torch–on feltwaterproofing
�
Under mechanically–fixed,single–ply non–bituminousmembranes
� � � �
Under fully adheredsingly–ply membranes
� �
In LPCB/FM approvedconstructions
� � � �
Protected Membrane Roofs
Traditionally protectedmembrane / Roof gardens
� �
Car park decks � � � �
Lightweight protected membrane/ maintenance access
� �
Green Roofs
Insulation suitable for useunder Green Roofs
� � � � � �
4
Kooltherm®K5ExternalwallBoard
Kooltherm®K8CavityBoard
Kooltherm®K12FramingBoard
Kooltherm®K15RainscreenBoard
Kooltherm®K17InsulatedPlasterboard
Kooltherm®K18InsulatedPlasterboard
Thermawall®TW
50
Thermawall®TW
55
Styrozone
®N300R
Styrozone
®H350R
nilvent®
Kooltherm®CavityCloser&
Kooltherm®CavityCloserPLUS
Thermabate®&Thermabate®PLUS
Product Selector
Wall Insulation
Floor Insulation
5
Kooltherm®K3Floorboard
Kooltherm®K10FM
SoffitBoard
Thermafloor
®TF70
Thermafloor
®TF73
Styrozone
®N300R
Styrozone
®H350R
Styrozone
®N500R
Styrozone
®N700R
Solid ground floors � �
Suspended ground floors � �
Floating ground floors � �
Soffit lining �
Heavy duty / industrial / cold store floors � � � �
Partial fill cavity walls � �
Internal dry–lining � �
Insulated render systems �
Rainscreen cladding systems �
Timber frame � �
Steel frame � �
Basement walls � �
Cavity Closers � �
Breathable membrane �
6
U–value Time SaverHelp us to help you when requesting U–values from KingspanInsulation’s Technical Advice Service. Please provide thefollowing information for all building elements:• What U–value is required?• Project address and postcode• Type of building eg. Offices.
Flat Roof• What is the type of waterproofing being used?• What is the roof substrate – timber, concrete or profiled metal deck?• Is there a ceiling – if yes then is it plasterboard or suspended tile?• If using Kingspan Thermaroof® TR31 what are the joist size centres?• If mechanical fixings are being used – what are they (carbon steel, galvanised steel,
stainless steel or telescopic fixings)?
Pitched Roof• What are the size and centres of the rafters or ceiling joists?• Is the insulation at ceiling or rafter level?• If at rafter level, is there a 50 mm ventilated airspace between the rafters above the insulation?• If no 50 mm ventilated airspace, is there a breathable membrane above the rafters?• If a breathable membrane is being used is it above or below the counter batten or draped into the rafter void?
Wall Construction• What is the wall construction – cavity, solid wall, rendered?• If cavity wall construction, what is the manufacturer and type of block being used for inner
(and outer if applicable) leaf or its thermal conductivity (may also be known as λ–value?)• What is the internal wall finish?• Is the wall above ground or basement wall?
Ground Floor• What is the perimeter / area ratio? (This is the length of the externally exposed floor slab perimeter measured
on the inside wall, not including internal or separating walls, divided by the floor area.)• Is the floor a solid ground bearing slab, suspended beam & block or suspended timber or concrete floor
(if suspended timber the joist size and centres are required.)
Floor Other Than Ground• Is soffit insulation required?• If the insulation is to be fitted between joists what are the joist size and centres?
Technical AdviceTelephone: 01544 387 382 Fax: 01544 387 482 Email: [email protected]
7
Building Regulations and Standards
New Buildings Existing BuildingsBest Starting Point Extension, Conversion and
Renovation Of All BuildingsDwellings Buildings Other New Elements Refurbishment /
Than Dwellings Retained ElementsLofts 0.13 0.14 0.16 0.16All other roofs 0.13 0.14 0.18 0.18Walls 0.18 0.22 0.28 0.30Floors 0.13 0.18 0.22 0.25
* There are specific exceptions relating to, e.g. conversion of heated buildings and infilling of openings. Please consult the Technical Handbooks.Column B applies where the existing building has, or will be improved to have, wall U–values better than 0.7 W/m2.K and roof U–values betterthan 0.25 W/m2.K. If the U–values are worse, then column A applies.
New Buildings Existing BuildingsDomestic Non– Extension, Conversion &
Domestic Renovation – Most Works*Notional Best Domestic Domestic Domestic Non–Building Starting New New Altered / Domestic
Point Elements Elements RefurbishedA* B* Elements
Lofts 0.13 0.13 0.13 0.15 0.15 0.15All other roofs 0.13 0.13 0.15 0.18 0.18 0.15Walls 0.19 0.22 0.19 0.22 0.22 0.25Floors 0.15 0.18 0.15 0.18 0.18 0.20
England and WalesNew Buildings (ADL 1A & ADL 2A)The main requirement of Approved Documents L1A and L2A is that buildings meet a defined CO2 emissions target. The roof, wall andfloor U–values required to meet this target will depend on the design of the building, orientation, heating system etc. To ease theprocess, Kingspan Insulation has undertaken analysis to give the ‘best starting point’ U–values, for specifiers to work from in gettingtheir designs to comply. They will be almost exactly what is required for some buildings and short of what is required for others.These ‘best starting point’ U–values are shown below.
Existing Buildings (ADL 1B & ADL 2B)Approved Documents L1B and L2B give specific U–value requirements for newly constructed elements and retained / refurbishedelements. They apply to all works, regardless of whether the works relate to an extension, conversion or renovation.These required U–values are shown below.
ScotlandNew Buildings (Section 6 – Energy)The main requirement of Technical Handbooks Sections 6 is that buildings meet a defined CO2 emissions target. For domestic, thistarget is generated by a set of 2010 notional buildings, which also offer a simplified elemental approach to compliance. If a building isconstructed in accordance with the parameter values that define the notional building, then it will automatically comply with the CO2
emissions target. The ‘notional’ U–values for roofs, walls and floors are shown opposite. For non–domestic, the approach is the sameas that described overleaf for ADL2A and ‘best starting point’ U–values are shown below.
Existing Buildings (Section 6 – Energy)Technical Handbooks Sections 6 give specific area–weighted average U–value requirements for newly constructed elements and altered/ refurbished elements. They apply to most works*, regardless of whether the works relate to an extension, renovation, or conversione.g. of a whole unheated building, loft or garage. For existing dwellings, there are differing requirements for newly constructedelements, depending upon the thermal efficiency of the existing building*. The required U–values are shown below.
8
Kingspan Kooltherm® K7 Pitched Roof Board
RoofInsulation
Roof Insulation
10
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
INSULATION FOR TILED OR SLATED PITCHEDWARM ROOF SPACES
Recommended for:
� New build� Re–roofing� Loft conversion� Unventilated pitched roofs – between rafters� Unventilated pitched roofs –
between and over rafters� Ventilated pitched roofs –
between rafters
K7 Pitched Roof Board
Product Data
Kingspan Kooltherm® K7Pitched Roof Board
Kingspan Kooltherm® K18Insulated Plasterboard
Kingspan nilvent®
Thermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Facings Composite foilCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 25 – 140 mmComplementary Products � nilvent® (page 47)
� Kooltherm® K18 Insulated Plasterboard (page 31)
RoofInsulation
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
11
RoofInsulation
INSULATION FOR TILED OR SLATED PITCHEDWARM ROOF SPACES
Recommended for:
� New build� Re–roofing� Loft conversion� Unventilated pitched roofs – between rafters� Unventilated pitched roofs –
between and over rafters� Ventilated pitched roofs –
between rafters
TP10
Product Data
Kingspan Thermapitch® TP10
Kingspan Kooltherm® K18Insulated Plasterboard
Kingspan nilvent®
Thermal Conductivity 0.022 W/m.KFacings Composite foilCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 20 – 150 mmComplementary Products � nilvent® (page 47)
� Kooltherm® K18 Insulated Plasterboard (page 31)
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
12
INSULATION FOR FLAT ROOFS WATERPROOFED WITHPARTIALLY BONDED BUILT–UP FELT AND MASTIC ASPHALT
Recommended for:
� New build� Refurbishment� Metal, concrete or timber decks
Product Data
Kingspan Thermaroof® TR21
Kingspan Kooltherm® K8 Cavity Board
Thermal Conductivity 0.027 W/m.K (insulant thickness < 80 mm)0.026 W/m.K (insulant thickness 80 – 119 mm)0.025 W/m.K (insulant thickness ≥ 120 mm)
Facings Glass reinforced perforated celluloseCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.6 mThicknesses Available 30 – 120 mmComplementary Products
TR21RoofInsulation
13
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
INSULATION FOR FLAT ROOFS WATERPROOFED WITH COLDLIQUID APPLIED WATERPROOFING
Recommended for:
� Fast–track building programmes� New build� Refurbishment� Metal, concrete or timber decks
TR25
Product DataThermal Conductivity 0.026 W/m.K (insulant thickness < 80 mm)
0.025 W/m.K (insulant thickness 80 – 119 mm)0.024 W/m.K (insulant thickness ≥ 120mm)
Facings Coated glass tissueCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.6 mThicknesses Available 50 – 120 mmComplementary Products
RoofInsulation
Kingspan Kooltherm® K8 Cavity Board
Kingspan Thermaroof® TR25
14
TR26 LPC/FM
LPS 1181: Part 1Certificate No. 388b/01
Class 1 RoofConstruction
INSULATION FOR FLAT ROOFS WATERPROOFED WITHMECHANICALLY FIXED SINGLE–PLY WATERPROOFING
Recommended for:
� LPCB / FM compliance� Fast–track building programmes� New build� Refurbishment� Metal, concrete or timber decks
Product Data
Kingspan Thermaroof® TR26
Kingspan Kooltherm® K8 Cavity Board
Thermal Conductivity 0.022 W/m.KFacings Composite foilCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 25 – 150 mmComplementary Products � Thermataper® TT46 LPC/FM (page 17)
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
RoofInsulation
INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLYADHERED SINGLE–PLY, PARTIALLY BONDED BUILT–UP FELT,MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFING
Recommended for:
� LPCB / FM compliance� Fast–track building programmes� New build� Refurbishment� Metal, concrete or timber decks
TR27 LPC/FM
LPS 1181: Part 1Certificate No. 388b/01
Class 1 RoofConstruction
Kingspan Kooltherm® K8 Cavity Board
Kingspan Thermaroof® TR27
Product DataThermal Conductivity 0.026 W/m.K (insulant thickness < 80 mm)
0.025 W/m.K (insulant thickness 80 – 119 mm)0.024 W/m.K (insulant thickness ≥ 120mm)
Facings Coated glass tissueCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.6 m and 1.2 x 2.4 mThicknesses Available 25 – 130 mm (1.2 x 0.6 m boards) and 50 – 145 mm (1.2 x 2.4 m boards)Complementary Products � Thermataper® TT47 LPC/FM (page 18)
15
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
RoofInsulation
16
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
STRUCTURAL INSULATION / FSC CERTIFIED PLYWOODCOMPOSITE FOR FLAT ROOFS WATERPROOFED WITHPARTIALLY BONDED BUILT–UP FELT
Recommended for:
� New build� Refurbishment� Directly over timber decks
Product Data
Kingspan Thermaroof® TR31
Kingspan Kooltherm® K8 Cavity Board
Kingspan Kooltherm® K7 Pitched Roof Board
Thermal Conductivity 0.022 W/m.K (insulant)0.140 W/m.K (plywood)
Upper Facing FSC certified 6 mm WBP exterior grade plywoodCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Lower Facing Composite foilBoard Size 1.2 x 2.4 mThicknesses Available 50 – 120 mm (Insulation thickness only)Complementary Products
TR31RoofInsulation
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
17
RoofInsulation
TT46 LPC/FM
Product Data
Kingspan Thermataper® TT46 LPC/FM
Kingspan Kooltherm® K8 Cavity Board
Thermal Conductivity 0.022 W/m.KFacings Composite foilCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mManufactured Rate of Fall 1:30; 1:40; 1:60; 1:80Complementary Products � Thermaroof® TR26 LPC/FM (page 14)
TAPERED INSULATION FOR FLAT ROOFS WATERPROOFED WITHMECHANICALLY FIXED SINGLE–PLY WATERPROOFING
Recommended for:
� Alternative to expensive screed–to falls roofs� Reducing load–bearing implications
for new or existing structures� Fast–track building programmes� New build� Refurbishment� Metal, concrete or timber decks
LPS 1181: Part 1Certificate No. 388b/01
Class 1 RoofConstruction
18
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
TT47 LPC/FM
Product Data
Kingspan Thermataper® TT47 LPC/FM
Kingspan Kooltherm® K8 Cavity Board
Thermal Conductivity 0.026 W/m.K (insulant thickness < 80 mm)0.025 W/m.K (insulant thickness 80 – 119 mm)0.024 W/m.K (insulant thickness ≥ 120 mm)
Facings Coated glass tissueCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.6 m and 1.2 x 2.4 mManufactured Rate of Fall 1:30; 1:40; 1:60; 1:80Complementary Products � Thermaroof® TR27 LPC/FM (page 15)
TAPERED INSULATION FOR FLAT ROOFS WATERPROOFED WITHFULLY ADHERED SINGLE–PLY, PARTIALLY BONDED BUILT–UP FELT,MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFING
Recommended for:
� Alternative to expensive screed–to falls roofs� Reducing load–bearing implications
for new or existing structures� Fast–track building programmes� New build� Refurbishment� Metal, concrete or timber decks
LPS 1181: Part 1Certificate No. 388b/01
Class 1 RoofConstruction
RoofInsulation
19
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
RoofInsulation
K11 Roofboard
Product Data
Kingspan Kooltherm® K8 Cavity Board
Kingspan Kooltherm® K11 Roof Board
Thermal Conductivity 0.023 W/m.K (insulant thickness 25 – 44 mm)0.021 W/m.K (insulant thickness ≥ 45 mm)0.050 W/m.K (perlite)
Upper Facing 20 mm bitumen coated perliteCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Lower Facing Glass tissueBoard Size 1.2 x 1.0 mThicknesses Available 40 and 70 mm (Insulation thickness only)Complementary Products
INSULATION FOR FLAT ROOFS WATERPROOFED WITHFULLY BONDED TORCH APPLIED MULTI–LAYERBITUMINOUS WATERPROOFING
Recommended for:
� New build� Refurbishment� Metal, concrete or timber decks
20
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
N 300 R
Product Data
Kingspan Kooltherm® K8 Cavity Board
Kingspan Styrozone® N 300 R
Thermal Conductivity 0.035 W/m.K (insulant thickness < 80 mm)0.037 W/m.K (insulant thickness 80 mm)0.038 W/m.K (insulant thickness 100 − 160 mm)0.040 W/m.K (insulant thickness > 160 mm)
Core High performance rigid extruded polystyrene insulant manufactured with a blowing agentthat has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)
Board Size 1.25 x 0.6 mThicknesses Available 30 – 180 mmComplementary Products � Styrozone® H 350 R (page 21)
INSULATION FOR INVERTED ROOFS, BASEMENTS, CAR PARKDECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL ANDCOLD STORE FLOORING
Recommended for:
� New build� Refurbishment� Inverted / protected
membrane roofs� Basement walls� Below floor slab or screed
RoofInsulation
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
21
RoofInsulation
Product Data
Kingspan Kooltherm® K8 Cavity Board
Kingspan Styrozone® H 350 R
Thermal Conductivity 0.029 W/m.K (insulant thickness ≤ 120 mm)0.031 W/m.K (insulant thickness > 120 mm)
Core High performance rigid extruded polystyrene insulant manufactured with a blowing agentthat has zero Ozone Depletion Potential (ODP)
Board Size 1.25 x 0.6 mThicknesses Available 30 – 160 mmComplementary Products � Styrozone® N 300 R (page 20)
INSULATION FOR INVERTED ROOFS, BASEMENTS, CAR PARKDECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL ANDCOLD STORE FLOORING
Recommended for:
� New build� Refurbishment� Inverted / protected membrane roofs� Basement walls� Below floor slab or screed
H 350 R
22
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
N 500 R
Product Data
Kingspan Styrozone® N 500 R
Thermal Conductivity 0.036 W/m.K (insulant thickness ≤ 70 mm)0.038 W/m.K (insulant thickness > 70 mm)
Core High performance rigid extruded polystyrene insulant manufactured with a blowing agentthat has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)
Board Size 1.25 x 0.6 mThicknesses Available 30 – 120 mmComplementary Products � Styrozone® N 300 R (page 20)
� Styrozone® H 350 R (page 21)� Styrozone® N 700 R (page 23)
INSULATION FOR CAR PARK DECKS, AND HEAVY DUTYCOMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING
Recommended for:
� New build� Refurbishment� Inverted / protected membrane roofs� Below floor slab or screed
RoofInsulation
23
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
RoofInsulation
Product Data
Kingspan Styrozone® N 700 R
Thermal Conductivity 0.036 W/m.K (insulation thickness ≤ 50 mm)Core High performance rigid extruded polystyrene insulant manufactured with a blowing agent
that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Board Size 1.25 x 0.6 mThicknesses Available 50 mmComplementary Products � Styrozone® N 500 R (page 22)
INSULATION FOR CAR PARK DECKS, ANDHEAVY DUTY COMMERCIAL, INDUSTRIALAND COLD STORE FLOORING
Recommended for:
� New build� Refurbishment� Inverted / protected membrane roofs� Below floor slab or screed
N 700 R
Kingspan Kooltherm® K8 Cavity Board24
WallInsulation
Wall Insulation
26
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
K5 External Wall Board
Product Data
Kingspan Kooltherm® K5 External Wall Board
Thermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Facings Glass tissueCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.6 mThicknesses Available 20 – 100 mmComplementary Products
EXTERNAL INSULATION FOR MASONRY WALLS
Recommended for:
� Solid walled buildings� Transforming and upgrading
the appearance ofexisting buildings
� New build� Refurbishment� Insulated render system
on masonry
WallInsulation
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
27
K8 Cavity Board
Product Data
Kingspan Kooltherm® K8 Cavity Board
Kingspan Kooltherm® K3 Floorboard
Thermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Facings Composite foilCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.45 mThicknesses Available 20 – 120 mmComplementary Products � Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page 42)
� Thermabate® and Thermabate® PLUS Cavity Closer (page 44)
PARTIAL FILL CAVITY WALL INSULATION
Recommended for:
� Traditional cavity wall construction methods� New build� All brick and block types
WallInsulation
28
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
K12 Framing Board
Product Data
Kingspan Kooltherm® K12 Framing Board
Kingspan Kooltherm® K18 Insulated Plasterboard
Kingspan nilvent®
Thermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Facings Composite foilCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 25 – 140 mmComplementary Products � nilvent® (page 47)
� Kooltherm® K18 Insulated Plasterboard (page 31)
INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS
Recommended for:
� Insulating between studs� Insulating sheathing� Steel frame walls� Timber clad / tile hung
timber frame wallsWallInsulation
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
29
K15 Rainscreen Board
Product Data
Kingspan Kooltherm® K15 Rainscreen Board
Thermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Facings Composite foilCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 25 – 130 mmComplementary Products
INSULATION FOR RAINSCREEN CLADDING SYSTEMS
Recommended for:
� Proprietary and non–proprietaryexternal finishes
� Insulated rainscreencladding systems onboth masonry andsteel frames
� New build� Refurbishment
WallInsulation
Kingspan Kooltherm® K15 Rainscreen Board is also available with a black foil face.
30
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
K17 Insulated PlasterboardINSULATED PLASTERBOARD FOR PLASTER DAB /ADHESIVE BONDED DRY–LINING
Recommended for:
� Traditional cavity walls� Solid rendered walls� Insulation and dry–lining
applications� New build� Refurbishment
Kingspan Kooltherm® K17 Insulated Plasterboard
Kingspan Kooltherm® K8 Cavity Board
Product DataThermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)
0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)0.190 W/m.K (plasterboard)
Front Facing 12.5 mm plasterboardCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Reverse Facing Glass tissueBoard Size 1.2 x 2.4 mThicknesses Available 20 – 100 mm (Insulation thickness only)Complementary Products � Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page 42)
� Thermabate® and Thermabate® PLUS Cavity Closer (page 44)� Kooltherm® K18 Insulated Plasterboard (page 31)
WallInsulation
31
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
K18 Insulated Plasterboard
Product Data
Kingspan Kooltherm® K18 Insulated Plasterboard
Thermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)0.190 W/m.K (plasterboard)
Front Facing 12.5 mm plasterboardCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Reverse Facing Composite foilBoard Size 1.2 x 2.4 mThicknesses Available 20 – 100 mm (Insulation thickness only)Complementary Products � Kooltherm® K12 Framing Board (page 28)
� Kooltherm® K7 Pitched Roofing Board (page 10)� Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page 42)� Thermabate® and Thermabate® PLUS Cavity Closer (page 44)� Kooltherm® K17 Insulated Plasterboard (page 30)
INSULATED PLASTERBOARD FOR MECHANICALLYFIXED DRY–LINING
Recommended for:
� Solid walls� Timber frame walls� Timber rafters� Metal furring systems� Insulation, dry–lining and
vapour control applications� New build� Refurbishment� Loft conversions
WallInsulation
TW50PARTIAL FILL CAVITY WALL INSULATION
Recommended for:
� Traditional cavity wall construction methods� New build� All brick and block types
Kingspan Thermawall® TW50
Product DataThermal Conductivity 0.022 W/m.KFacings Composite FoilCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 0.45 mThicknesses Available 20 – 100 mmComplementary Products � Thermabate® and Thermabate® PLUS Cavity Closer (page 44)
� Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page 42)� Kooltherm® K8 Cavity Board (page 27)
32
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
WallInsulation
TW55INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS
Recommended for:
� Insulating between studs� Insulating sheathing� Steel frame walls� Timber clad / tile hung
timber frame walls
Kingspan Thermawall® TW55
Kingspan nilvent®
Product DataThermal Conductivity 0.022 W/m.KFacings Composite foilCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 20 – 150 mmComplementary Products � Kooltherm® K18 Insulated Plasterboard (page 31)
� nilvent® (page 47)� Kooltherm® K12 Framing Board (page 28)
33
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
WallInsulation
Kingspan Kooltherm® K18 Insulated Plasterboard
Kingspan Kooltherm® K3 Floorboard34
FloorInsulation
Floor Insulation
36
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
K3 FloorboardINSULATION FOR FLOORS
Recommended for:
� Below the floor slab / screed� Beam and block floors� Suspended timber floors� Underfloor heating applications� Floor perimeter insulation� New build� Refurbishment
Kingspan Kooltherm® K3 Floorboard
Kingspan Kooltherm® K8 Cavity Board
Product DataThermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)
0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Facings Glass tissueCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 25 – 140 mmComplementary Products
FloorInsulation
37
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
K10 FM Soffit BoardINSULATION FOR STRUCTURAL CEILINGS (SOFFITS)
Recommended for:
� Insulating under structural ceilings� Car park ceilings
Kingspan Kooltherm® K10 Soffit Board
Product DataThermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)
0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)
Upper Facing Glass tissueCore Premium performance rigid thermoset modified resin insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Exposed Facing Composite foilBoard Size 1.2 x 2.4 mThicknesses Available 25 – 140 mmComplementary Products
FloorInsulation
TF70INSULATION FOR SOLID CONCRETE AND SUSPENDEDGROUND FLOORS
Recommended for:
� Below the floor slab / screed� Beam and block floors� Domestic floating floors� Suspended timber floors� Underfloor heating applications� Floor perimeter insulation� New build� Refurbishment
Kingspan Thermafloor® TF70
Product DataThermal Conductivity 0.022 W/m.KFacings Composite foilCore High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with
a blowing agent that has zero Ozone Depletion Potential (ODP) and low GlobalWarming Potential (GWP)
Board Size 1.2 x 2.4 mThicknesses Available 20 – 150 mmComplementary Products
38
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
Kingspan Kooltherm® K8 Cavity Board
FloorInsulation
TF73INSULATION FOR FLOATING AND SUSPENDED GROUND FLOORS
Recommended for:
� Solid floating ground floors� Beam and block floors� Suspended timber floors� Areas where high compressive
strength required� New build� Refurbishment
Kingspan Thermafloor® TF73
Kingspan Kooltherm® K8 Cavity Board
Product DataThermal Conductivity 0.029 W/m.K (insulant thickness 20 – 70 mm)
0.030 W/m.K (insulant thickness 70 – 120 mm)0.150 W/m.K (chipboard)
Upper Facing FSC certified 18 mm T&G chipboardCore High performance rigid extruded polystyrene insulant manufactured with a blowing
agent that has zero Ozone Depletion Potential (ODP)Board Size 2.4 x 0.6 mThicknesses Available 25 – 80 mm (Insulation thickness only)Complementary Products
39
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
FloorInsulation
Kingspan Kooltherm® K18 Insulated Plasterboard40
Cavity Closers
CavityClosers
42
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
FOR CLOSING CAVITIES AROUND OPENINGS IN MASONRY WALLS
Recommended for:
� Traditional cavity wall construction� Window and door cavities� Use with PVCu and
wooden frames� Simplified construction� Cavity widths up to 305 mm� Using as a frame former
(Kooltherm® Cavity CloserPLUS only)
Kingspan Kooltherm® K8 Cavity Board
Kingspan Kooltherm® Cavity Closer
Product DataThermal Conductivity 0.022 W/m.KSheathing PVC–U extrusionCore Premium performance rigid thermoset modified resin insulant manufactured with a
blowing agent that has zero Ozone Depletion Potential (ODP) and low Global WarmingPotential (GWP)
Length 2.4 mWidths Available 50 – 150 mm (or combinations up to 305 mm)Complementary Products � Kooltherm® K8 Cavity Board (page 27)
� Thermawall® TW50 (page 32)� Kooltherm® K17 Insulated Plasterboard (page 30)� Kooltherm® K18 Insulated Plasterboard (page 31)
CavityClosers
Cavity Closer
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
CavityClosers
Kingspan Kooltherm® Cavity Closer 50For cavities 50 – 74 mm wide
Kingspan Kooltherm® Cavity Closer 75For cavities 75 – 99 mm wide
Kingspan Kooltherm® Cavity Closer 100For cavities 100 – 109 mm wide
Kingspan Kooltherm® Cavity Closer 110For cavities 110 – 124 mm wide
Kingspan Kooltherm® Cavity Closer 125For cavities 125 – 149 mm wide
Kingspan Kooltherm® Cavity Closer 150For cavities 150 – 155 mm wide
43
6
31.5
50
48
128
6
31.5
110
48
170
6
31.5
125
48
170
6
31.5
150
48
170
6
31.5
75
48
128
6
31.5
100
48
128
Cavity CloserPRE–FORMED TO SPECIFIED OPENING SIZES FOR CLOSINGCAVITIES IN PLASTIC, TIMBER, OR METAL WINDOW FRAMESAND AN INSULATED LINTEL
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
FOR CLOSING CAVITIES AROUND OPENINGS IN MASONRY WALLS
Recommended for:
� Traditional cavity wall construction� Window and door cavities� Use with PVCu and
wooden frames� Simplified construction� Cavity widths up to 200 mm� Using as a frame former
(Thermabate PLUS only)
Kingspan Kooltherm® K8 Cavity Board
Kingspan Thermabate®
Product DataThermal Conductivity 0.034 W/m.KSheathing PVC–U extrusionCore High performance rigid thermoset urethane insulantLength 3.0 mWidths Available 50 – 100 mm*Complementary Products � Kooltherm® K8 Cavity Board (page 27)
� Thermawall® TW50 (page 32)� Kooltherm® K17 Insulated Plasterboard (page 30)� Kooltherm® K18 Insulated Plasterboard (page 31)
44
*Sections can be joined together to suit cavity widths up to 200 mm.
CavityClosers
45
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
Thermabate® 50(Brown)
Thermabate® 65(Black)
Thermabate® 75(White)
Thermabate® 85(Yellow)
Thermabate® 90(Orange)
Thermabate® 100(Green)
CavityClosers
PRE–FORMED TO SPECIFIED OPENING SIZES FOR CLOSINGCAVITIES IN PLASTIC, TIMBER, OR METAL WINDOW FRAMES ANDAN INSULATED LINTEL
BreathableM
embranes
Breathable Membranes
Visit www.kingspaninsulation.co.uk to download the full product brochure,order samples and learn about case studies
47
BREATHABLE MEMBRANE FOR UNVENTILATED PITCHED ROOFSAND TIMBER FRAME WALLSRecommended for:
� All types of pitched roofing� Timber framing� Under battens or directly
on sarking boards� New build� Re–roofing
Kingspan nilvent®
Product DataWater Vapour Resistance 0.17 MN.s/gLiquid Water Penetration > 2 mTensile Strength 233 N longitudinal
162 N transverseRoll Length 50 mRoll Width 1.5 mThickness 0.5 mmArea Per Roll 75 m2
Complementary Products � Kooltherm® K7 Pitched Roof Board (page 10)� Kooltherm® K12 Framing Board (page 28)� Thermapitch® TP10 (page 11)� Thermawall® TW55 (page 33)
BreathableM
embranes
General EnquiriesTel: +44 (0) 1544 388 601Fax: +44 (0) 1544 388 888
email: [email protected]
Technical AdviceTel: +44 (0) 1544 387 382Fax: +44 (0) 1544 387 482
email: [email protected]
Tapered RoofingTel: +44 (0) 1544 387 383Fax: +44 (0) 1544 387 483
email: [email protected]
Literature and SamplesTel: +44 (0) 1544 387 384Fax: +44 (0) 1544 387 484
email: [email protected]: www.kingspaninsulation.co.uk/literature
Customer ServiceTel: +44 (0) 1544 388 601Fax: +44 (0) 1544 388 888
email: [email protected]
® Kingspan, Kooltherm, nilvent, Styrozone, Thermafloor, Thermaroof, Thermawall, Thermapitch, Thermataper,the zo Device and the Lion Device are Registered Trademarks of the Kingspan Group plc in the UK Ireland and other countries. All rights reserved.
Kingspan Insulation Ltd. Registered in England & Wales, No. 01882722. Registered Office: Pembridge, Leominster, Herefordshire HR6 9LA UK.
Kingspan Insulation LtdPembridge, Leominster, Herefordshire HR6 9LA, UK
www.kingspaninsulation.co.uk