Product Overview - Tekni-Plex · 2016-10-22 · Tekni-Plex makes no warranty, express or implied, with respect to this information and disclaims all liability from reliance on it.

Pharma Films PVC Based

Product Characteristics

Flexapharm® PVC Mono Single layer PVC film used for standard blister packaging

Flexapharm® PVDC Duplex PVC film coated with PVDC providing medium barrier to moisture and oxygen

Flexapharm® PVDC Triplex PVC film laminated to PE and coated with PVDC providing medium barrier to moisture and oxygen

Flexapharm® PVDC SBC PVC film laminated to PE and coated with Super Barrier PVDC providing excellent barrier to moisture and oxygen

Flexapharm® Laminated PVC film laminated to PE for production of suppositoriy blisters and monodoses

Tekniflex® Aclar® Duplex Aclar® film laminated to PVC providing excellent barrier to moisture

Tekniflex® Aclar® Triplex Aclar® film laminated to PE and PVC providing excellent barrier to moisture

Tekniflex® Aclar® Symmetrical Aclar® film laminated on two sides to PVC providing excellent barrier to moisture

Tekniflex® Aclar® Oxygen Aclar® film laminated to EVOH and to PVC providing excellent barrier to moisture and good barrier to oxygen

Product Overview

Pharma Films PVC Free

Product Characteristics

Tekniflex® PX Mono Single layer Copolyester (PX) film used for standard blister packaging

Tekniflex® PET MTS Single layer PET film used for standard blister packaging

Tekniflex® PXA Duplex Copolyester (PX) laminated to Aclar® providing excellent barrier to moisture

Tekniflex® PP Mono Single layer Polypropylene film used for standard blister packaging

Tekniflex® COC PnP COC film coextruded with Polypropylene providing a good barrier to moisture

Tekniflex® ECO PnP COC film coextruded with Polypropylene and EVOH providing a good barrier to moisture and oxygen

Review date 5 May 2016

Tekni-Films USA1445 Timberwolf DriveHolland, OH 43528 • USATel : +1 908 566 1127E-mail: [email protected]

Tekni-Plex Gallazzi SrlVia S. Allende 621049 Tradate (VA) • ItalyTel : +39 0331 815 211E-mail: [email protected]

Tekni-Films EuropeIndustrielaan, 379320 Erembodegem • BelgiumTel : +32 53 650 711E-mail: [email protected]

Tekni-Films South AmericaTimoteo Gordillo 54901439 Buenos Aires • ArgentinaTel : +54 11 4605 4042E-mail: [email protected]

Disclaimer:  The information set forth in this brochure is subject to change without notice and must be confirmed at time of purchase. Tekni-Plex makes no warranty, express or implied, with respect to this information and disclaims all liability from reliance on it. Tekni-Plex specifically disclaims all other warranties, express or implied, with respect to the products, including, but not limited to, warranties of merchantability and fitness for a particular purpose. Nothing herein shall constitute or imply any promise to enter into a legally valid relationship.

Aclar® is a Honeywell registered trademark • Flexapharm® is a Tekni-Plex Gallazzi registered trademark Tekniflex® is a Tekni-Plex registered trademark • Teknilid™ is a Tekni-Plex trademark • TekniMD™ is a Tekni-Plex trademark

EUFL1731

Medical Packaging Films

Product Characteristics

TekniMD™ PX MED Copolyester (PX) mono film used for medical device thermoformed trays

TekniMD™ PETG MED PETG mono film used for medical device thermoformed trays

TekniMD™ PXA | PGA PX or PETG film laminated to Aclar® providing high barrier to moisture

TekniMD™ PXOA | PGOA PX or PETG film laminated to EVOH and to Aclar® providing high barrier to moisture and good barrier to oxygen

TekniMD™ PXP | PGP PX or PETG film laminated to PE for medical thermoformable tray packaging

TekniMD™ COC PGnPG COC film coextruded with PETG skin layers used for medical device thermoformed traysproviding a good barrier to moisture

PX = Copolyester • PG = PETG • COC = Cyclic Olefin Copolymer

Pharma Lidding Foils

Product Characteristics

Teknilid™ Lidding Foils Unsupported and paperbacked foil based lidding foil used for standard blister packaging

Product Overview