US-CL,-A, HB-D,-C, PB(I)-D,-C, STP M2-PB | M4-PB GFT-X SIN-S,-HL,-L | CSN VNK-T2 | VSG DCN | DCU | DCR | DCE | ZHVD-SZ EM-A,-B | EM-S KSZ-MB,-DZN,-AZN,-NZN,-AZL, GF 80, ACS Postfach 1151 • D-88070 Meckenbeuren Wiesentalstraße 28 • D-88074 Meckenbeuren Tel. +49 (0) 7542 - 405 - 0 Vertrieb Inland: Fax +49 (0) 7542 - 3886 E-mail [email protected]Sales International: Fax: +49 (0) 7542 - 405 - 181 E-mail [email protected]SMW-AUTOBLOK Japan Inc. 1-5 Tamaike-Cho, Nishi-Ku 461-Nagoya Tel. +81 (0) 52 - 504 - 0203 Fax +81 (0) 52 - 504 - 0205 E-mail [email protected]SMW-AUTOBLOK Corporation 285 Egidi Drive - Wheeling, IL 60090 Tel. +1 847 - 215 - 0591 Fax +1 847 - 215 - 0594 E-mail [email protected]SMW-AUTOBLOK Argentina Rio Pilcomay 1121 - Bella Vista RA - 1661 Bella Vista Buenos Aires Tel. +54 (0) 1146 - 660 603 Fax +54 (0) 1146 - 660 603 E-mail [email protected]SYSTEC METALÚRGICA LTDA R. Luiz Brisque, 980 13280-000 - Vinhedo - SP Tel. +55 (0) 193 886 - 6900 Fax +55 (0) 193 886 - 6970 E-mail [email protected]SMW-AUTOBLOK Workholding Pvt. Ltd., Plot No. 45, B.U. Bhandari Industrial Estate, Sanaswadi, Tal. Shirur DIST. PUNE - 412 208 Tel. +91 2137 - 616 974 Fax +91 2137 - 616 972 E-mail [email protected]SMW-AUTOBLOK Mexico, S.A. de C.V. Pirineos No. 515-B, Nave 16 Col. Industrial Benito Juarez Micro Parque Industrial Santiago Queretaro, Qro. C.P. 76130 Tel. +52 (442) 209 - 5118 Fax +52 (442) 209 - 5121 E-mail [email protected]SMW-AUTOBLOK (Shanghai) Work Holding Co.,Ltd. Building 6, No.72, JinWen Road, KongGang Industrial Zone, ZhuQiao Town, Pudong District 201323, Shanghai P.R. China Tel. +86 21 - 5810 - 6396 Fax +86 21 - 5810 - 6395 E-mail [email protected]Via Duca D‘Aosta n.24 Fraz.Novaretto I-10040 Caprie - Torino Tel. +39 011 - 9638411 Tel. +39 011 - 9632020 Fax +39 011 - 9632288 E-mail [email protected]SMW-AUTOBLOK Workholding Ltd. 8, The Metro Centre GB-Peterborough, PE2 7UH Tel. +44 (0) 1733 - 394 394 Fax +44 (0) 1733 - 394 395 E-mail [email protected]SMW-AUTOBLOK 17, Avenue des Frères Montgolfier - Z.I Mi-Plaine F-69680 Chassieu Tel. +33 (0) 4 - 727 - 918 18 Fax +33 (0) 4 - 727 - 918 19 E-mail [email protected]SMW-AUTOBLOK Russia B.Tulskaya str., 10, bld.3, off. 3203, 115191 Moscow (Russia) Tel. +7 495 -231-1011 Fax +7 495 -231-1011 E-mail [email protected]AUTOBLOK Company Ltd. NO.6, SHUYI RD., SOUTH DIST., TAICHUNG, TAIWAN Tel. +886 4-226 10826 Fax +886 4-226 12109 E-mail [email protected]SMW-AUTOBLOK s.r.o. Merhautova 20 CZ - 613 00 BRNO Tel. +420 513 034 157 Fax +420 513 034 158 E-mail [email protected]SMW-AUTOBLOK Scandinavia AB Kasernvägen 2 SE - 281 35 Hässleholm Tel. +46 (0) 761 420 111 E-mail [email protected]SMW-AUTOBLOK IBERICA, S.L. Ursalto 10 - Nave 2 Pol. 27 - Mateo Gaina 20014 San Sebastián (Guipúzcoa) (Spain) Tel. +34 943 - 225 079 Fax +34 943 - 225 074 E-mail [email protected]www.smw-autoblok.de www.smw-autoblok.de Subject to typo`s, errors and technical changes. 10.2015 Standard- and special jaws and T-nuts for all commercial chucks, soft and hard version Mounting adapters on short taper spindle noses, direct or indirect mounting Exchangeable grippers Grease for manual and power chucks and for sealed chucks included in proofline ® -series Gripping force tester Wireless handheld with battery Dynamic gripping force and static gripping force measuring Speed measuring Display and PC software in various languages for data output on a laptop/computer 6 different measuring heads available Multible chucks on fixtures with 2 or 4 chucks Self centering For milling machines and machining centers Built-in pneumatic cylinders 2 or 3 jaws Sizes: 130 - 315 mm Hydraulic or pneumatic stationary chucks with integrated cylinder For applications on machining centers and special machines INCH serration or Tongue & groove 2 or 3 jaws With and without through-hole PBI-D,-C: With manifold for air supply (indexing only) Sizes: 80 - 800 mm Jaws and Accessories Stationary cylinder / chuck unit Jaws, Adapters, Grippers, Grease Double piston, rotating hydraulic cylinders Up to 70 bar (DCN, DCU, DCR, DCE); up to 80 bar (ZHVD-SZ) Linear stroke control or proximity switches Central bore for air, coolant or oil For high speed DCN, DCU, DCR: Modular system for different piston strokes DCE: 2 x same piston area ZHVD-SZ: for shaft chucks type W Rotating hydraulic cylinders, open center Up to 45 bar (VNK); up to 30 bar (VSG) Linear stroke control or proximity switches CP-3 unit for rotary union For high speed VNK-T2: through hole up to 127 mm VSG: Extra large through hole up to 204 mm Rotating hydraulic and pneumatic cylinders, closed center Up to 70 bar (SIN); up to 7 bar (CSN) Central bore for air or coolant For high speed Linear stroke control or proximity switches SIN-HL: High-low gripping force clamping SIN-L: Long stroke CSN: Pneumatic Rotating cylinders Hand or power operated expanding mandrels up to max. 130 mm Large expansibility 0,5 - 2 mm depending on size Flange mounting Very rigid design EM-S: Hardened and vulcanised sleeves, quick change Mandrels Collet chucks Collet chucks / Column chucks Collet quick change High gripping force and repeatability Pull down effect or axial fixed position clamping For high speed Air sensing Mexico Argentina India China Japan U.S.A. Brazil SMW-AUTOBLOK Spannsysteme GmbH Spain France Great Britain Russia Taiwan Czech Republic / Slovakia Sweden / Norway AUTOBLOK s.p.a. PRODUCT OVERVIEW Chucks | Steady Rests | Cylinders | Accessories
2
Embed
PRODUCT OVERVIEW - FN Niederhauser · Gripping force tester Wireless handheld with battery Dynamic gripping force and static gripping force measuring Speed measuring Display and PC
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
� 3 jaws � APL-D,-M,-C: Extra long stroke � Sizes: 170 - 1000 mm
� Wedge hook chucks closed center � INCH serration / Metric serration or tongue & groove
� Suitable for vertical machines � For chucking parts � 2 or 3 jaws (4 jaws only Ø 400) � AL-D,-M: Extra long stroke � Sizes: 125 - 400 mm
� Wedge bar manual chuck � Quick jaw change � High concentricity and repeatability � Jaws can be radially adjusted and reversed � With and without sealing, 3 jaws � HG-N: Jaw system SMW (Reishauer)
Straight serration � HG-F: Jaw system Forkardt
Inclined serration � Sizes: 160 - 630 mm
� Manual face plate � Closed center � Tongue & groove � Manual clamping and radial setting of jaws
� 4 jaws � Sizes: 1000 - 2000 mm
� Pull-down chuck with active pull-down � Self centering or compensating clamping
� Premium Steady rests line - Narrow � Narrow arms for crankshafts � Integrated coolant / air flush chip quard � Stroke control via proximity switch or linear stroke control
� Basic and Standard Steady rests line � Stroke control via proximity switch or linear stroke control
� Chip guard � Central lubrication � Safety valve � Port for compressed air � SLU-X: Proofline® - steady rest = fully sealed – low maintenance
� SLUB: With side mounted cylinder � SLU-A: Additional pivoting upper arm
� Hydraulic front-end chucks � INCH serration � Hydraulic oil supplied through the machine spindle or tube bundle
� 3 or 4 jaws � Case hardened body � HYDL-S: Long stroke � Sizes: 180 - 800 mm
� Extra large through hole - BIG BORE � INCH serration � With rapid and clamping stroke (ES) � BB-AZ2G: Self centering / compensating � BB-FZA2G: 6 jaws (3+3) � BB-SC: Spring clamp, Proofline®-chucks = fully sealed - low maintenance
� SF-RAZ: Hydraulic Ring indexing chuck � Sizes: 400 - 1050 mm
� Pneumatic front-end chucks � Extra large through hole � Built-in pneumatic cylinder � INCH serration � 3 jaws � SP-ES: With rapid and clamping stroke � SP-L: Long jaw stroke � Sizes: 125 - 350 mm