Product Guide - Wilson Hot Waterwilsonhotwater.com.au/wordpr8/wp-content/uploads/2018/04/...hot or chilled water storage. The MPS vessel are available in sizes from 400 litres to 2000

Product Guide

Experienced

Flexible

Reliable

Approachable

Genuine

Wilson Hot Water commenced operations in 1930, in the backyard of the Melbourne suburb of Coburg. Mr A J Wilson, an electrician, began manufacturing low pressure water heaters for the domestic market… a product we still manufacture nearly 90 years later.

Wilson is still Australian owned and operated, however, the range of products Wilson Customised Hot Water now manufacture has grown significantly.

1

Quick Reference Index

Commercial Pressure Vessels & Calorifiers Page 03

Commercial Hot Water Storage Page 04

Solar Ready Tanks (SRT) Page 05

Domestic Hot Water Heaters Page 06

Solar Preheat Systems Page 07

ThermaCoil Heat Recovery Page 08

Ceiling Mount Water Heaters (Gravity Feed) Page 9 - 10

Floor Mount Water Heaters (Gravity Feed) Page 11 - 12

Boiling/Chilled - Undercounter Page 13

Boiling Water Units - Wall Mount Page 14

Instantaneous Electric - A5 Page 15

Instantaneous Electric - Super X Page 16

Stackable Safe Trays Page 17

Chilled Water Buffer Tanks Page 18

Dosing Pots Page 19

Dairy Hot Water Heaters - RF Series Page 20

Dairy Hot Water Heaters - D Series Page 21

Dairy Solar Systems Page 22

Header Tanks - Cold Feed Page 23

Spare Parts Page 24-26

2

Wilson Hot Water manufactures high quality, long service life vessels for projects that require large volume hot or chilled water storage. The MPISV vessel are available in sizes from 400 litres to 5000 litres and are manufactured from high grade Duplex 2205 stainless steel.

Vessels can be heated by boiler, calorifier coil, solar thermal, heat pump, electric elements and/or a combination.

Design & Features

Duplex 2205 Stainless Steel20 Year Warranty

MPISV Specifications

3

PRESSURE VESSELS & CALORIFIERS

• Mains Pressure Stainless Steel cylinder - Duplex 2205

• Polyurethane foam insulation

• Designed to AS1210

• Calorifier coils available up to 155 kW

• Tube & Bundle heat exchangers designed to suit application

• Watermark approved

MODEL

MPISV400MPISV650MPISV800MPISV1000MPISV1500MPISV2000MPISV2500MPISV3000MPISV4000MPISV5000

CAPACITY (litres)

4006508001000150020002500300040005000

DIAMETER (mm)

880880880880130013001300130018001800

HEIGHT (mm)

1100164019402440165020902540299021202570

Wilson specialise in customer satisfaction, endeavouring to design specific to projects, that require large volume hot or chilled water storage. The MPS vessel are available in sizes from 400 litres to 2000 litres and are manufactured from 316 grade stainless steel.

Vessels can be heated by boiler, calorifier coil, solar thermal, heat pump, electric elements and/or a combination.

• Mains Pressure Stainless Steel cylinder - 316

• Rockwool insulation

• Designed to AS1210

• Calorifier coils available up to 155 kW


• 10 year warranty

Design & Features

MPS Specifications

MODEL

MPS400

MPS650

MPS800

MPS1000

MPS2000

CAPACITY (litres)

400

650

800

1000

2000

DIAMETER (mm)

880

880

880

880

13000

HEIGHT (mm)

1100

1640

1940

2440

2300

HOT WATER STORAGE

316 Stainless Steel 10 Year Warranty

4

If your old electric hot water heater has failed and your not ready to add solar hot water your home just yet you can purchase a Wilson Solar Ready Tank. The Wilson Solar Ready Tank will work the same as your old electric water heater, but will have the extra flow and return ports added for when you are ready to add solar hot water evacuated tube or flat panels.

The tanks are manufactured from stainless steel and fitted with flow/return ports, a temperature probe pocket plus the normal cold inlet and hot outlet with a 3.6kW electric element.



• Solar flow/return ports

• 3.6kW element (optional)

• Temperature probe pocket



* if element NOT required change prefix to MPS

Design & Features

Solar Ready Tank Specifications

5

MODEL

Delivery (L)

Element (optional)

Solar Flow/Return Ports

Temperature Probe

Height (mm)

Diameter (mm)

PTR Setting

Max.Supply Pressure

MPE315S*

315L

3.6kW

2015

620

850kPa

750kPa

MPE315SM*

315L

3.6kW midmount

2015

620

850kPa

750kPa

MPE250S*

250L

3.6kW

1690

620

850kPa

750kPa

MPE160S*

160L

3.6kW

1190

620

850kPa

750kPa

SOLAR READY TANKS (SRT)


Wilson Hot Water Heaters are available in both storage and electric boosted options and manufactured from 316 grade stainless steel.

The cylinder is then cased in ‘Dune’Colorbond® and insulated with high grade polyurethane foam. These heaters are available in three sizes of 160, 250 and 315 litres.

6

* if element NOT required change prefix to MPS

Design & Features

Electric or Storage Specifications



• 3.6kW element (optional)

• Outer Casing - Dune Colorbond®



MODEL

Delivery (L)

PTR Setting

Max.Supply Pressure

Approx. Weight Empty

Max. Temperature

Elements

Rec. Temperature

Dimension (H) mm

MPE160*

160L

850kPa

750kPa

30kg

80˚C

1 x 3.6kW

70˚C

1190

MPE250*

250L

850kPa

750kPa

50kg

80˚C

1 x 3.6kW

70˚C

1690

MPE315*

315L

850kPa

750kPa

80kg

80˚C

1 x 3.6kW

70˚C

2015

HOT WATER HEATERS


Wilson Hot Water, established since 1930, have a range of Solar preheat Gas & Electric boosted hot water systems; to suit your requirements or specification. Our pressure vessels are manufactured exclusively in stainless steel for industrial, commercial & residential applications.

7

Design & Features• Complete packages available • Choice of evacuated tube/ flat panel / tank mounted or free standing boiler • Long life stainless steel vessels - 10 or 20 year warranty options available• Hot water storage buffer tanks from 160 litre - 5000 litre

We can custom buildto suit your specific requirements

Gas or Electric Combination Systems

The Wilson Hot Water ThermaCoil stainless steel tank is among the most efficient heat exchange mains pressure tanks available.

ThermaCoil is the ideal vessel for heating domestic hot water from renewable energy or waste heat sources with the highly efficient finned tube heat exchange coil designed to deliver as much energy as possible into the ThermaCoil tank. Energy sources can be:

ThermaCoil Specifications

8

MODEL

Delivery

Solar Compatible

Stove wet back compatible

Heat Exchanger/Internal Coil

Element

Cylinder

Height

Diameter

Approx Weight (empty)

Various kW ratings available

WTC315

315L

YES

YES

3.6kW

Stainless Steel

2015mm

620mm

88kg

WTC250

250L

YES

YES

3.6kW

Stainless Steel

1690mm

620mm

58kg

Other tank and coil (kW rating) sizes upon request

Wilson low pressure electric water heaters are designed to be conveniently installed in the ceiling space. The water heaters are supplied complete with a compact polyethylene cold water feed tank, float and ball valve.

An optional special cold tank to allow equal flow of hot and cold water to the shower is available. Wilson units are constructed from copper, insulated then encased in galvanised steel.

Customised vessels can bemanufactured upon request

9

Ceiling MountHot Water Heaters

• Optional connection for solar and /or stove • Mains pressure coil or heating coil• High grade copper cylinder and galvanised outer case

• 5 year warranty

Design & Features

10

Wilson low pressure electric water heaters are designed to operate up to a head pressure of 7.0 metres via an overhead cold water feed tank. The water heater can be installed in the ceiling space or at floor level.

The position of the overhead tank controls the flow performance of the heater: the higher the header tank, the better the flow rate. These hot water heaters must be vented to atmosphere.

Customised vessels can bemanufactured upon request

11

Floor MountHot Water Heaters

Wilson floor type electric hot water systems are constructed of solid copper, enclosed in an extremely efficient insulation with a colourbond outer steel case. These water heaters can be heated with alternative energy options, such as solar and/or stove and can be fitted with a mains pressure coil.

For use with separate cold feed tank (Not supplied) and external heat source eg. slow combustion stove. Includes: 25mm stove connections

12

The Wilson Refresh is the ideal appliance for filtered boiling and chilled water in the office or home. The Wilson Refresh is available in three combinations; boiling /chilled, boiling only, chilled only. The Wilson Refresh has been designed for ease of use incorporating robust and reliable technology that delivers durability with stylish design.

• Australian made• Effortless programming• Filter change LED light• Low cost maintenance • Auto sleep mode

Design & Features

Under Counter Boiling & Chilled

13

* Chilled water delivery based on 20˚C incoming water temp, 10˚C chilled water, 32.2ºC ambient air temp. Remote tray kit available for split installation of boiler and chiller.

MODEL

Cups per hour (boil/chill)*

Dimensions (boiler)

Dimensions (chiller)

Weight (Approx)

Min Water Supply Pressure

Max Water Supply Pressure

Plumbing Connections

Input Power Boil/Chill

Electrical Connections

Filter BR 540

Tap

MODEL

Cups per hour (boil/chill)*

Dimensions (boiler)

Dimensions (chiller)

Weight (Approx)

Min Water Supply Pressure

Max Water Supply Pressure

Plumbing Connections

Input Power

Electrical Connections

Filter BR 540

Tap

W120B/125C

120/125

300W x 300D x 616H

340W x 440D x 535H

50kg

250kPa

1600kPa

15mm BSP male

2400W/390W

2x3 pin 10A plug

YES

W65C

65 Chilled

315W x 415D x 365H

15kg

250kPa

1600kPa

15mm BSP male

260W

1x3 pin 10A plug

NO

Carafe

W125C

125 Chilled

340W x 440D x 535H

21kg

250kPa

1600kPa

15mm BSP male

390W

1x3 pin 10A plug

NO

Carafe

W90B/125C

90/125

300W x 300D x 616H

340W x 440D x 535H

45kg

250kPa

1600kPa

15mm BSP male

1800W/390W

2x3 pin 10A plug

YES

W120B

120 Boiling/Ambient

300W x 300D x 616H

20kg

250kPa

1600kPa

15mm BSP male

2400W

1x3 pin 10A plug

YES

W90B/65C

90/65

300W x 300D x 406H

315W x 415D x 365H

40Kg

250kPa

1600kPa

15mm BSP male

1800W/260W

2x3 pin 10A plug

YES

W90B

90 Boiling/Ambient

300W x 300D x 406H

15Kg

250kPa

1600kPa

15mm BSP male

1800W

1x3 pin 10A plug

YES

The Wilson Electronic Cuppa is avalable in 13 models, with either white colorbond or a stainless steel exterior finish. Commencing at 2.5 litres which will suit a small office or factory to the massive 60 litre unit with 2 outlet taps for quick discharge of hot water. Ideal for commercial kitchens and restaurants.

No separate thermostat required as all models are electronically controlled resulting in a minimum fluctuation of water temperature. Low maintenance - The boiling water unit has only 2 moving parts: Float valve and draw off tap.

MODEL

AU02.5

AU05

AU10

AU15

AU15/3.6

AU20

AU20/3.6

AU25

AU25/3.6

AU30

A30/3.6

AU45

AU60

Litres/Cup

2.5/15

15/30

10/60

15/90

15/90

20/120

20/120

25/150

25/150

30/180

30/180

45/270

60/360

Cups/min

2.5

2.5

2.5

2.5

3.5

2.5

3.5

2.5

3.5

2.5

3.5

5.0

5.0

Tank Type

Stainless Steel

Stainless Steel

Stainless Steel

Copper

Copper

Copper

Copper

Copper

Copper

Copper

Copper

Copper

Copper

H x W x D

380 x 310 x 155

485 x 310 x 155

590 x 335 x 170

490 x 370 x 275

490 x 370 x 275

565 x 370 x 275

565 x 370 x 275

640 x 370 x 275

640 x 370 x 275

715 x 370 x 275

715 x 370 x 275

710 x 426 x 340

860 x 426 x 340

Element kW

2.4

2.4

2.4

2.4

2 x 1.8

2.4

2 x 1.8

2.4

2 x 1.8

2.4

2 x 1.8

2 x 2.4

2 x 2.4

Weight

6.4kg

7.2kg

8.4kg

12.5kg

12.5kg

13.5kg

13.5kg

14.5kg

14.5kg

16.2kg

16.2kg

18.5kg

20.2kg

Wall Mounted Models

* Note: All 2.4 and 3.6 kW units supplied with flex and plug brackets (2.4 kW = 10Amp) (3.6 kW = 15Amp) 4.8 kW units to be direct wired. No warranty on float valve.

14

The Wilson A5 Series is a continuous flow instantaneous electric hot water heater. The Wilson A5 is energy efficient as it will only heat water as required. The heater has no storage and will continually heat as water passes over the heating elements. The Wilson A5 does not require a safetray or water saving devices.

The Wilson A5 can be installed virtually anywhere to cater for most installations and is fully serviceable. This unit will deliver sufficient hot water for factory amenities, small domestic dwellings and shops.

• 3 Models: - A5: 20 amp 3 Phase - A5: 23 amp 3 Phase - A5: 18 amp 3 Phase• Serviceable parts• 2 year Dom. & Com. Warranty • Watermark approved

• Adjustable flow control

15

Design & Features

Installation Diagram

Instantaneous Electric Water Heater

The new Wilson Super X version 6 has been designed to be a flexible instantaneous hot water unit. It can be installed with or without the supplied Expansion Valve making for a quick & easy installation. The choice is yours! The Wilson Super X has no storage and is energy efficient as it only heats water as required and will continually heat as water passes over the elements.

The Wilson Super X can be installed virtually anywhere and will supply enough hot water for small domestic dwellings, shops or factory amenities.

• 18 Amp / 3 phase

• 4.5 Litres per min. with a 40˚C temp rise

• 2 year Dom. & Com. Warranty • Optional Expansion Valve• Western Australian Specific

16

Design & Features

Installation

Instantaneous Electric Water Heater

All Wilson Safetrays are stackable therefore reducing the amount of room required on stock shelves whilst allowing for ease of transport and less damage.Wilson trays are manufactured in four materials; Galvanised, Zinc, Copper and Plastic and a wide range of sizes will cover most requirements. Other sizes can be made to client specifications

17

Options and SizesMODEL

T001B

T006

T009

T001A

T007

T008

T004

T005

Size W x L x H

450mm x 450mm x 50mm


550 mm x 550mm x 50mm




1050mm x 1050mm x 50mm

1100mm x 1100mm x 50mm

Type

Galvanised Safety Tray








TC001B

TC006

TC009

TC001A

TC007

TC008

TC004



550 mm x 550mm x 50mm




1050mm x 1050mm x 50mm

Copper Safety Tray

Copper Safety Tray

Copper Safety Tray

Copper Safety Tray

Copper Safety Tray

Copper Safety Tray

Copper Safety Tray

TZ001B

TZ006

TZ009

TZ001A



550 mm x 550mm x 50mm


Zinc Safety Tray

Zinc Safety Tray

Zinc Safety Tray

Zinc Safety Tray

TP450

TP500

TP550



550 mm x 550mm x 50mm

Plastic Safety Tray

Plastic Safety Tray

Plastic Safety Tray

• Unique stackable tray • Easy to transport• Range of sizes available• Choose from galvanised, zinc, copper & plastic

Design & Features

Other size metal trays made to order

Zinc

Galvanised

Copper

Plastic

Wilson Chilled Water Buffer Tanks (CWBT) are designed specifically for chilled water systems. Designed and built to AS1210 Pressure Vessel Code, Haz E. These heavy duty commercial stainless steel vessels are available in options of polyurethane or polystyrene, foil coated, vapour sealed insulation to comply to Section J of BCA code.

The Chilled Water Buffer Tank is then surrounded by an attractive colorbond outer case with the option to upgrade to aluminium or stainless steel. The properly sized CWBT is the perfect solution to rectify low level water conditions which occurs from insufficient water volume to chiller capacity ratio.

This additional “buffer” capacity adds the necessary volume capacity required to eliminate problems such as; excessive chiller cycling, poor temperature control or erratic system operation. Standard vessels are manufactured in stainless steel therefore not susceptible to corrosion, that can occur due to high condensation in higher humidity environments.

Larger sizes available upon request up to 5,000 litres

Chilled Water Buffer Tank Specifications

18

MODEL

Capacity (L)

Height (H)

Diameter (D)

Weight (kg)

CWBT330

330

1610

660

85

CWBT400

400

1900

660

110

CWBT530

530

1525

880

130

CWBT680

680

1790

880

150

CWBT810

810

2100

880

160

CWBT1050

1050

2600

880

185

Flanges available from 50mm- 300mm to comply to specification

CHILLED WATER BUFFER TANKS

Specifications below are based on grade 304 stainless steel and stainless steel overflow. All other sizes are made to order.

All sizes made to order in grade 316 stainless steel. Higher pressure ratings are available.

1

MODEL

WILDP14

MODEL

WILDP07

WILDP15

WILDP20

WILDP25

WILDP40

WILDP45

Weight Unfilled

6.7 Kg

Weight Unfilled

5.2 Kg

6.7 Kg

8.2 Kg

9.3 Kg

12.3 Kg

13.1 Kg

Stand. Pressure & Temp

1MPA at 99˚C

Stand. Pressure & Temp

1MPA at 99˚C

1MPA at 99˚C

1MPA at 99˚C

1MPA at 99˚C

1MPA at 99˚C

1MPA at 99˚C

Diameter x Nominal Height

216mm x 915mm

Diameter x Nominal Height

216mm x 740mm

216mm x 970mm

216mm x 1100mm

216mm x 1230mm

318mm x 1090mm

318 mm x 1145mm

Description

14 LT Dosing Pot

Description

7 LT Dosing Pot

15 LT Dosing Pot

20 LT Dosing Pot

25 LT Dosing Pot

40 LT Dosing Pot

45 LT Dosing Pot

Stock Item

Made to Order

• 304 Stainless Steel

• 316 Stainless Steel made to order

• Australian Made• Coupon Racks Available

Design & Features

For Closed Circulating Systems

19

20

MODEL

RF 0315

RF 0400

RF 0500

RF 0630

RF 0800

RF 1000

RF 1260

RF 1360

RF 1500

RF 1600

RF 1800

RF 2000

Element Sizes (kW) Main / Booster

2 x 3.0 main / 1 x 3.0 booster












Dia x Height (mm)

860 x 1095

860 x 1295

860 x 1535

860 x 1845

1040 x 1570

1040 x 1865

1140 x 1895

1140 x 2040

1140 x 2210

1140 x 2345

1140 x 2570

1140 x 2810

Del. Litres

315

400

500

630

800

1000

1260

1360

1500

1600

1800

2000

Dairy Hot Water Heater Specifications

Suffix Code

COCB

COSS

SSCB

SSSS

Outer Case

Colourbond

Stainless Steel

Colourbond

Stainless Steel

Cylinder

Copper

Copper

Stainless Steel

Stainless Steel

* Add suffix code to product # below (eg: RF 1000 COCB)

All units are fitted with adjustable thermostats and supplied with tip to toe anodes. The range of dairy heaters allows for the correct choice to be made to suit all cleaning programs: as a rule of thumb, 25 litres per set of cups per day.

Wilson have available four flexible options depending on your requirements eg. the traditional copper cylinder with

colorbond case, ranging to the premium stainless steel cylinder with polished stainless steel outer case.

Rapid Flow Dairy Heaters

The Wilson “D” Series Dairy Water Heater is available with or without attached header tank. If installed with a separate header tank, the maximum head pressure which is measured from the base of the storage unit to the top of the open vent pipe, must not exceed 6 metres.

21

MODEL

D2

D3

D5

D6

D7

D8








Dia x Height (mm)

660 x 920

660 x 1255

660 x 1575

790 x 1365

790 x 1640

790 x 2000

Del. Litres

160

250

315

400

500

630

MODEL

D2/T

D3/T

D5/T

D6/T

D7/T

D8/T








Dia x Height (mm)

660 x 1320

660 x 1655

660 x 1975

790 x 1765

790 x 2040

790 x 2400

Del. Litres

160

250

315

400

500

630

“D” Series Dairy Heater With separate cold feed tank - 1” outlet

“D/T“ Series Dairy Heater With attached cold feed tank - 1” outlet

Both models are available in a variety of sizes and all are fitted with main and booster elements. The booster element is used to restore heat lost between the morning and evening milking and can either be turned on and off manually or controlled by a time switch. Element sizes are based on a 8 hour heatingcycle, but can be varied upon request.

“D” Series Dairy Heaters

Understanding energy costs increase year on year and dairy hot water heaters contribute a large portion to the cost of energy in the dairy shed, Wilson Hot Water have

designed an integrated solar hot water system specifically for the dairy industry using high performance Evacuated Tube technology coupled with one Wilson tank to suit your

dairy farm hot water requirements.

22

Dairy Solar Specifications

MODEL

Solar Tank

Solar Panels

Support Frame

Pump

Solar Controller

Header Tank

WDS600/1

1 x 600 Ltr

50 tubes

WDS600/2

1 x 600 Ltr

100 tubes

WDS800/2

1 x 800 Ltr

100 tubes

WDS1000/2

1 x 1000 Ltr

100 tubes

WDS1260/3

1 x 1260 Ltr

150 tubes

WDS1500/3

1 x 1500 Ltr

150 tubes

Dairy Hot Water Solar Solutions

Larger size solar systems available upon request

23

COLD FEED TANKS

CODE No. DESCRIPTION LITRES W x D x H (mm)

* Note: Other sizes available upon request

SPARE PARTS

Wilson A5 - Electric Instantaneous

Wilson Super X - Electric Instantaneous

Wilson Refresh - Undercounter Boiling/Chilled

24

SPARE PARTS

Elements

Valves, Solenoid & Float

25

BWU = Boiling Water Unit DOM = Domestic Water HeatersDAIRY = Dairy Hot Water Heaters

SPARE PARTS

Taps

Thermostats

Miscellaneous

Anodes

BWU = Boiling Water Unit DOM = Domestic Water HeatersDAIRY = Dairy Hot Water Heaters

26

All product sold in accordance with “Wilson Hot Water Warranty and General Conditions of Sale”.

2017-01

130 -140 Merrindale DriveCroydon South VIC 3136

P +61 3 9751 7788 F +61 3 9751 7755

[email protected]

Product Guide - Wilson Hot Waterwilsonhotwater.com.au/wordpr8/wp-content/uploads/2018/04/...hot or chilled water storage. The MPS vessel are available in sizes from 400 litres to 2000

Documents