OPTIONS FINISHED PRODUCT DIMENSIONS SPECS + MAL MNL ORB MATTE ALUMINUM MATTE NICKEL OIL RUBBED BRONZE CR POLISHED CHROME FEATURES Angled shoe rail beautifully presents your shoes on an incline Also be set at the same level for shoes without heels Customizable to fit any section width of your choice Bracket features a multi-position mounting design BRACKET FINISH: 300.3122.xxx 300.3120.xxx BRACKET SHOE RAIL SHOE STORAGE shoe rail + bracket 300.3122.xxx 300.3120.xxx SHOE RAIL FINISH: BLACK WHITE ALMOND (FINISH) (FINISH) 14" 36" Shoe Rail 14" 32mm 3/4” Shoe Rail Bracket 14" Shoe Rail Bracket SHOE RAIL BRACKET 300.3122.MAL
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
OPTIONS
FINISHEDPRODUCT
DIMENSIONS
SPECS +
MAL MNL ORB
MATTEALUMINUM
MATTENICKEL
OIL RUBBEDBRONZE
CR
POLISHEDCHROME
FEATURES
Angled shoe rail beautifully presents
your shoes on an incline
Also be set at the same level for shoes
without heels
Customizable to fit any section width of
your choice
Bracket features a multi-position
mounting design
BRACKET FINISH:
300.3122.xxx300.3120.xxxBRACKET
SHOE RAILSHOE STORAGE shoe rail + bracket
300.3122.xxx 300.3120.xxx
SHOE RAIL FINISH:
BLACK WHITE ALMOND
(FINISH)(FINISH)
PRODUCT GUIDE
SHOE RAILS 300.3122.[FIN]
INSTRUCTIONS & SPECIFICATIONS
STEP 1: Chose the mounting positions to suit the shoes being stored.STEP 2: Slide the Shoe Rail Brackets over the Shoe Rails.STEP 3: Position Shoe Rail in between the partitions at desired height.STEP 4: Press Shoe Rail Brackets into System holes.
DESCRIPTION & SPECIFICATIONS
This angled shoe rail will beautifully present your shoes on an incline and can also be set at the same level for shoes without heels.
- Two Shoe Rail Brackets 300.3120 required per rail.
www.TAGHardware.comStorage Accessories. Differentiated by Design.
FINISH CODE (FIN)
MATTE ALUMINUM MAL
POLISHED CHROME CR
MATTE NICKEL MNL
OIL RUBBED BRONZE ORB
MATTE BRASS MBS
POLISHED BRASS BS
PRODUCT GUIDE
SHOE RAIL BRACKETS300.3120.BLK/AL/WH
INSTRUCTIONS & SPECIFICATIONS
STEP 1: Chose the mounting positions to suit the shoes being stored.STEP 2: Slide the Shoe Rail Brackets over the Shoe Rails.STEP 3: Position Shoe Rail in between the partitions at desired height.STEP 4: Press Shoe Rail Brackets into System holes.
DESCRIPTION & SPECIFICATIONS
The Shoe Rail Bracket is used to mount shoe rails directly into the system holes of the partitions. No additional mounting hardware required.
- No additional hardware is required to mount.
SIZE & CAPACITY | ONE SIZE
AVAILABLE FINISHES |
Black, White, Almond.
32mm
3/4”
Shoe Rail Bracket
14"
Shoe Rail Bracket
www.TAGHardware.comStorage Accessories. Differentiated by Design.