PRODUCT GUIDE Head office Pramonės str. 8A LT-94102 Klaipėda, Lithuania Phone +370 46 411 911 Fax +370 46 301 233 [email protected]Branch office Ganibu dambis 30B LV-1005 Riga, Latvia Phone +371 676 507 22 Fax +371 676 507 24 [email protected]Branch office Suvorova str. 57 236039 Kaliningrad, Russia Phone +7 4012 311 411 Fax +7 4012 311 445 offi[email protected]Warehouse/Logistic center Shannonweg 86 (Port number 5064) 3197 LH Rotterdam-Botlek The Netherlands Printed on recycled paper www.linkedin.com/company/pikasoma-uab www.shipserv.com www.facebook.com/pikasoma www.pikasoma.lt A part of Garant Group
12
Embed
PRODUCT GUIDE - ShipServ...Pikasoma is a member of marine supply, service and repair group GARANT. Our company provides services to ships through our branch offices and partners worldwide.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRODUCT GUIDE Head officePramonės str. 8ALT-94102 Klaipėda, LithuaniaPhone +370 46 411 911Fax +370 46 301 [email protected]
Warehouse/Logistic centerShannonweg 86 (Port number 5064) 3197 LH Rotterdam-BotlekThe Netherlands
Printed on recycled paper
www.linkedin.com/company/pikasoma-uab
www.shipserv.com
www.facebook.com/pikasoma
www.pikasoma.lt
A part of Garant Group
ww
w.p
ikas
oma.
lt ww
w.pikasom
a.ltANCHORS
Stockless Anchor type “HALL”
1 2
Stockless Anchor type “SPEK”
High Holding Power Anchor type “AC-14”
High Holding Power Anchor type “POOL-TW”
Weight per Anchor (kgs)
H.H.P (kgs)
Total lenght
of chain (mtr)
Diameter
Grade2 Grade3
180 135 220 12.5 -
240 180 220 14 -
300 225 247.5 16 -
360 270 247.5 17.5 -
420 315 275 17.5 -
480 360 275 19 -
570 430 302.5 20.5 -
660 495 302.5 22 20.5
780 585 330 24 22
900 675 357.5 26 24
1020 765 357.5 28 24
1140 855 385 30 26
1290 970 385 32 28
1440 1080 412.5 34 30
1590 1193 412.5 34 30
1740 1305 440 36 32
1920 1440 440 38 34
2100 1575 440 40 36
2280 1710 467.5 42 36
2460 1845 467.5 44 38
2640 1980 467.5 46 40
2850 2140 495 48 42
3060 2295 495 50 44
3300 2475 495 50 46
3540 2655 522.5 52 46
3780 2835 522.5 54 48
4050 3040 522.5 56 50
4320 3240 550 58 50
4590 3445 550 60 52
4890 3670 550 62 54
5250 3940 577.5 64 56
5610 4210 577.5 66 58
6000 4500 577.5 68 60
6450 4840 605 70 62
6900 5175 605 73 64
7350 5515 605 76 66
7800 5850 632.5 78 68
8300 6225 653.5 81 70
8700 6525 632.5 84 73
9300 6975 660 84 76
9900 7425 660 87 78
Equipment table
Our CompanyPikasoma is a member of marine supply, service and repair group GARANT. Our company provides services to ships through our branch offices and partners worldwide.
Solutions• The stock is created based on the needs of our customers• Thanks to our fully equipped warehouses and logistics network the products can be delivered in any place in the world based on customer’s needs.• The customer is guaranteed with the best products’ and logistics’ solutions.
PIKASOMA SHIP SUPPLY
In Pikasoma we believe that:• Quality is reached with the help of professional and experienced company’s team. • Best solutions are obtained with the help of continuing knowledge development of the team members. • Environment’s protection and its well-being are fundamental to our lives.
INTERNATIONAL SHIPSUPPLIERS & SERVICES ASSOCIATION
This is to certify that
The Quality Standard achieved has been demonstrated following a successful audit of procedures adopted by the
Company in its daily operations.
This Quality Standard has been endorsed by theISSA Board and indicates an Internationally accepted quality
work practice in the ship supply industry.
This certificate remains valid for a period of five years subject to an annual review and endorsement
The initial audit when the Company was firstsucessfully audited took place on
Annual Endorsement
Certificate No:
Auditor / Inspector By Order of the ISSA BoardISSA President
Date
has successfully achieved the
ISSA QUALITY STANDARD
043
Pikasoma Ltd Co
31/08/2006
14/01/2014
This is to certify that
Pikasoma Ship Supply Co
has been approved as a
SUPPLIER
Member of the International Marine
Purchasing Association in
December 2014
Henrik Steffensen -‐ IMPA Chairman & C.E.O
IMPA.NET Network | Learn | Debate
This certificate is the property of the International Marine Purchasing Association and must be returned to the Administration Office on instruction from the Council.
Common link Common linkJoining Shackle Type Kenter Joining Shackle Type KenterEnd Shackle type D Swivel Shackle type BSwivel Forerunner 3 Link Adaptor
3 4All products are IACS approved.
ww
w.p
ikas
oma.
lt ww
w.pikasom
a.ltMIXED ROPE (PP+PES MIXED)
Constructed principally from high tenacity Polypropylene with outer yarns al-ternating with Polyester for increased abra-sion resistance.
Construction : 8-strand plaited rope
Features:• Wet strength equal to dry strength• Excellent resistance to frictional heat damage• Remains flexible and easy to splice in use• Does not absorb water• Fully UV stabilized• Excellent chemical resistance except in the presence of alkalis
Physical Properties:
Fiber Specific Gravity
Melting Point Elongation
Polypropylene monofilament & Polyester mixed.
0.99 165 °C 18-20%
Diam Cir. Breaking Strength Weight
mm Inch kN kg/220m
40 5 325.69 165
44 4-1/2 394.36 195
48 6 464.01 226
52 6-1/2 545.44 269
56 7 625.88 309
60 7-1/2 712.21 350
64 8 809.32 401
68 8-1/2 912.33 454
72 9 1020.24 506
76 9-1/2 1111.47 568
80 10 1251.76 640
5
NEW GENERATION ROPE
An alternative to DYNEEMA® mooring rope. Rope is Fabricated from Ultra High-Molecular Weight Polyethylene. Urethane coated for added UV and abrasion resis-tance. Wire rope replacement because of its superior strength.
Construction : 12-strand plaited rope
Features:• High strength• Low elongation• Floats due to low specific gravity• Outstanding abrasions & chemical resistance• 12-strand construction reduces chance of kink
Physical Properties:
Fiber Specific Gravity
Melting Point Elongation
UHMWPE,Urethane Coated
0.97(Floating) 150 °C 4~5%
Diam Cir. Breaking Strength Weight
mm Inch kN kg/220m
12 1-1/2 161.7 20.9
16 2 269.5 35.2
18 2-1/4 343.0 45.8
22 2-3/4 490.0 67.1
24 3 568.4 78.9
26 3-1/4 646.8 90.2
28 3-1/2 725.2 103.4
30 3-3/4 798.7 114.4
32 4 867.3 125.4
36 4-1/2 1019.2 149.6
40 5 1244.6 184.8
42 5-1/4 1372.0 204.6
44 5-1/2 1489.6 224.4
45 5-5/8 1558.2 235.4
48 6 1754.2 266.2
All products are produced in accordance with OCIMF guidelines and IACS approved.6
ww
w.p
ikas
oma.
lt ww
w.pikasom
a.ltSIX STRAND CROSS LAY ROPE
An alternative to ATLAS® rope for higher cost-efficiency.
Construction : 6-strand rope lay + core
Features:• Economical price• High abrasion resistance• Superior characteristics in mooring and on winch drum• High deformation resistance• Outstanding fatigue resistance
Physical Properties:
Fiber Specific Gravity
Melting Point Elongation
Nylon monofilament and high tenacity
nylon multifilament1.14 218 °C 22%
Diam Cir. Breaking Strength Weight
mm Inch kN kg/220m
40 5 304.0 220.0
44 5-1/2 412.0 275.0
48 6 491.0 325.6
52 6-1/2 530.0 352.0
56 7 652.0 440.0
60 7-1/2 687.0 477.4
62 7-3/4 775.0 517.0
64 8 795.0 539.0
68 8-1/2 922.0 616.0
70 8-3/4 1010.0 682.0
72 9 1059.0 737.0
78 9-3/4 1177.0 800.8
84 10-1/2 1373.0 935.0
90 11-1/4 1619.0 1111.0
96 12 1884.0 1287.0
7
FLOATING – WINCHLINE ROPE
FLOAT-WINCHLINE comprises special construction adopting wire rope lay.
Construction : 6-strand rope lay + core
Features:• Floats due to low specific gravity• High abrasion resistance• Outstanding performance in mooring and on winch drum• High stability to deformation• Outstanding fatigue resistance• High cost-effectiveness
Physical Properties:
Fiber Specific Gravity
Melting Point Elongation
Nylon monofilament and UV stabilized PP
multifilament
0.99 (Floating)
218 °C /165 °C
approx 23%
Diam Cir. Breaking Strength Weight
mm Inch kN kg/220m
40 5 307.7 217,8
44 5-1/2 391.0 253,0
48 6 456.5 301.4
52 6-1/2 502.7 354.2
56 7 624.3 411.4
60 7-1/2 670.3 470.8
64 8 763.4 536.8
68 8-1/2 875.1 607.2
72 9 1005.5 679.8
80 10 1173.1 838.2
All products are produced in accordance with OCIMF guidelines and IACS approved.8
This is specially developed floating winchline, with unique construction which combines long points of 6-strand and double braided.
Construction : 6-strand rope lay with core + outer layer cover
It provides outstanding performance on winch drum.Extraordinary low elongation increase safety by minimizing risks due to snapback action.
Features:• Low specific gravity• High abrasion resistance• Low elongation• Outstanding fatigue resistance• Good UV resistance• Doesn’t lose strength when wet.
Physical Properties:
Diam Cir. Breaking Strength Weight
mm Inch kN kg/220m
40 5 308.0 198.0
44 5-1/2 382.5 234.3
48 6 472.0 275.0
52 6-1/2 555 311.3
56 7 640.0 352.0
60 7-1/2 730.0 404.8
64 8 850.0 446.6
68 8-1/2 934.0 486.2
72 9 1045.0 545.6
80 10 1270.0 726.0
9 10
OCIMF recommends mooring mixed material tails with a MBL of 125% related to the steel wire rope mooring line.
Construction : 8-strand plaited rope
MOORING TAILS
Mooring steel wire rope Cruiser mooring tails
Diam, mm MBL, kN Diam, mm MBL, kN
28 547 60 699
30 628 64 788
32 715 72 984
34 807 76 1089
36 904 80 1194
38 1008 88 1428
All products are produced in accordance with OCIMF guidelines and IACS approved.
Fiber Specific Gravity
Melting Point Elongation
UV stabilized high tenacity
Polyolefin hybrid yarn
0.93 (Floating) 165 °C approx
15%
ww
w.p
ikas
oma.
lt ww
w.pikasom
a.ltGALVANIZED STEEL WIRE ROPES
DiamMinimum Breaking
load
Approx. Weight
mm kN kg/m
8 41.1 0.25
10 64.3 0.40
12 92.6 0.59
14 126 0.77
16 165 1.04
18 208 1.26
20 257 1.59
22 311 1.87
24 370 2.27
26 435 2.60
28 504 3.07
30 579 3.45
32 658 3.99
34 745 4.42
36 833 50.03
DiamMinimum Breaking
load
Approx. Weight
mm kN kg/m
10 70.6 0.45
12 102 0.63
14 138 0.86
16 181 1.12
18 229 1.42
20 282 1.75
22 342 2.12
24 406 2.53
26 477 2.95
28 553 3.44
30 635 3.93
32 723 4.51
34 816 5.06
36 914 5.67
38 1020 6.32
DiamMinimum Breaking
load
Approx. Weight
mm kN kg/m
10 98.3 4.97
11 118 6.01
12 140 7.16
13 162 8.40
14 188 9.74
16 251 12.72
18 308 16.10
20 382 2.05
22 466 2.40
24 555 2.86
26 660 3.36
28 758 4.00
30 883 4.59
32 980 5.22
34 1134 5.90
36 1271 6.61
DiamMinimum Breaking
load
Approx. Weight
mm kN kg/m
6 19.6 0.13
8 34.8 0.24
10 64.7 0.32
12 93.1 0.54
14 127 0.75
16 166 0.96
18 210 1.16
20 259 1.56
22 313 1.79
24 373 2.11
26 437 2.49
28 507 2.91
30 582 3.40
32 662 3.72
34 748 4.21
36 838 4.70
38 934 5.39
Non-rotating wire rope construction
Class 1960 N/mm², RHOL
Non-rotating wire rope construction Class 1960 N/mm²,
RHOL
Non-rotating wire rope construc-tion Compacted
Class 2160 N/mm², RHOL
Steel wire rope with fiber core construction
Class 1960N/ mm², RHOL
NON-ROTATING WIRE ROPES
19x7 WSC
NON-ROTATING WIRE ROPES
35x7 WSC
COMPACTED NON-ROTATING WIRE ROPES
35x7 WSC
GENERAL PURPOSEWIRE ROPES6x36WS+FC
MOORING WIRE ROPES
6x36WS+IWRC
In additional to supplying ropes we are able to: fit eyes up to Ø38mm using our 600 ton press carry out final product testing using our own test bed
Mooring steel wire rope with steel core construction Class 1960 N/
Fiberglass gratings are a modern alternative to traditional galvanized steel grating. Easier to handle and lighter then steel, they are also non-corrosive and do not require painting or other treatment. Their abrasive surface offers superior grip and greatly reduces the risk of slipping.Galvanized steel gratings available on special request.
Connection types:
Moulded Grating ISO 30 (38 x 38) Moulded Grating ISO 38 (38 x 38)
The loads were calculated at a bending of L/125. The bending L/125 equates to 0,75% bending of the span width. Bending f=L/125; L= span width) The custom designed applicability is to be tested individually.
Material Operation temperature Corrosion and chemical resistant
Isophthalic Polyester Resin -50 - 90 °C Industrial
Vinylester Resin -50 - 110 °C Superior
Span width (mm)
Concen-trated
load (kg)
Safety factor
Distri-buted load
(kg/m²)
Safety factor
300 1.740 2 x F 9.300 3 x q
450 770 3 x F 2.730 4 x q
600 430 4 x F 1.150 5 x q
750 275 5 x F 585 7 x q
900 191 6 x F 340 8 x q
1000 154 7 x F 247 9 x q
1200 107 8 x F 143 10 x q
Span width (mm)
Concen-trated
load (kg)
Safety factor
Distri-buted load
(kg/m²)
Safety factor
300 3.500 2 x F 18.600 3 x q
450 1.550 3 x F 5.500 4 x q
600 870 4 x F 2.340 5 x q
750 560 5 x F 1.190 7 x q
900 387 6 x F 690 8 x q
1000 314 7 x F 503 9 x q
1200 218 8 x F 290 10 x q
PanelThickness mm
25
30
38
Panel Size mm
Standard: 1000x2000
Panels can be cut to any size accord-ing to requirements
MeshSize mm
25x100
38x38
M-type J-type
Number ofdimension Dimensions (mm)
Zinc(ZnAlCd)Mass (kg)
Aluminium(AlZnIn)
Mass (kg)
l h a w c Gross Nett Gross Nett
1 250 40 150 170 240 10.60 10.00 4.80 4.20
2 250 30 105 170 180 5.50 5.10 2.60 2.20
3 500 30 105 380 180 11.00 10.50 4.80 4.30
4 500 35 55 380 150 6.20 5.75 2.80 2.35
5 500 30 85 380 170 8.00 7.50 3.00 2.50
Type: ANODE K2
Number ofdimension Dimensions (mm)
Zinc(ZnAlCd)Mass (kg)
Aluminium(AlZnIn)
Mass (kg)
l h a c Gross Nett Gross Nett
1 130 25 60 100 1.08 1.00 0.52 0.45
2 150 30 80 220 2.15 1.90 0.97 0.75
3 250 30 80 320 3.40 3.10 1.57 1.30
4 250 40 100 320 5.50 5.10 2.45 2.05
Type: ANODE K3
Number ofdimension Dimensions (mm)
Zinc(ZnAlCd)Mass (kg)
Aluminium(AlZnIn)
Mass (kg)
l h a c Gross Nett Gross Nett
1 400 40 125 460 10.50 9.95 4.00 3.45
2 450 40 125 510 12.00 11.35 5.00 4.35
3 550 45 125 610 16.00 15.25 6.50 5.75
4 650 45 125 710 21.00 20.10 8.00 7.10
5 800 50 125 860 27.00 25.95 11.50 10.45
6 900 50 125 960 30.00 28.80 13.00 11.80
7 1200 50 125 1280 40.00 38.40 18.00 16.40
8 800 50 150 880 - - 18.00 16.30
9 950 50 150 1030 - - 21.00 19.20
10 1050 65 150 1130 - - 30.00 27.60
11 1200 65 150 1280 - - 34.00 31.60
Type: ANODE K5
ANODE K2
ANODE K3
ANODE K5
AZn (ZnALCD)
Alloying elements (%) Maximum impurities (%) Electrochemical parameters AZn acc to DNV RP B401: TESTA