Product Specifications Fiber Distribution Unit Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com Your Partner For Network Optimization H101710JS080 Outdoor FDU Features and functions - Suitable for outdoor installation with IP65 protection - Wall mount and pole mount available - External cable can either be loose tube cable or slotted cable - Output cable can either be optical fiber cord or drop cable - Fiber additional attenuation: ≤0. 1dB - Fiber bending radius: ≥30mm - Axes orientation tensile strength: ≥1000N - Crush resistance: ≥2000N/100mm - Operating temperature: -20℃~+60℃ 24F Outdoor FDU 24F Outdoor FDU
137
Embed
Product Specifications Fiber.pdf · ·FTTX ·Fiber interface system ·Fiber transmission system Table 1 Table of Accessories configuration Accessories name Qty. Unit OCC User manual
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Stainless Cabinet Optical Cable Cross Connecting Cabinet (hereafter named OCC) is used to connect the fiber trunk cable and the distribution cable between
the interface devices, which has the import of cable, fastness, grounding protection, welding, jumping (distribution), storage, switching and
other functions. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk
cable and distribution side, can achieve the fiber optic lines linked, distributed and transited easily.
Product feature
·Cabinet is made of high strength stainless steel, protection class IP65, high intension,corrosion‐resistant, all weatherproof and can resist
accidental damage or malignant destruction. With double‐layer structure, filled with non‐combustible and a better insulation effect of the
molding quartz glass wool in the middle, greatly enhanced the cabinet effect of heat insulation, and flame‐retardant properties
·All cabinet corners using a dedicated rounded mold forming, surface treatment using drawing or electrostatic spray, aesthetic appearance.
·The special cabinet inside and outside gas convection channel can prevent water vapor coagulation effectively
·Three‐point locking pins, safety and reliability.
·Closed cabinet structure, supply the cable terminal and distribution with physical protection, prevent the optical fiber cable from
accidental damage.
·Cable entrance from the rack at the bottom and be fixed, grounding and protection.
·Equipped with an integrated fiber‐optic splice wiring module set fiber fusion welding, pigtail to accommodate and distribution all in one,
easy to use and maintain. Card installed FC, SC adapter, the adapter was 30 ° row of cloth, which ensures that the fiber bending and a half
by ≥ 40mm, avoiding the laser burns the human eye and optical fiber connectors to be injured when scheduling the roots. with a clear
fiber‐optic distribution sign.
Applications
·FTTX
·Fiber interface system
·Fiber transmission system
Table 1 Table of Accessories configuration
Accessories name Qty. Unit OCC User manual 1 ea Certification 1 ea Expansion Screw 4 set Nylon ties 20 ea Key 1 ea Fiber protecting tube 1 set Fiber heat‐shrinkable tube 1 set 3M tape 1 ea
Netop ID Tray counts Port counts Adapter type Interface Pigtail Loaded X XXX X X X N-ODU- 2: 2pcs 000:Null 0: Null 0: Null 0: without pigtail 3: 3pcs 1: SC 1: UPC 1: with 0.9mm pigtails 4: 4pcs 2: FC 2: APC 6: 6pcs 3: LC Duplex 8: 8pcs 4: ST
One product ID label with measurement values per patchcord
Serial number label on patchcord
Ordering Information Netop fiber optic patchcords and pigtails are ordered with part number “N-98C” by following additional eight characters as defined by digit 1 through digit 8: Digit 1 - Fiber cable type, Digit 2 - Cable diameter, Digit 3 – Cable structure, Digit 4 - Polished connector endface for SM or core diameter for MM, Digit 5 & Digit 6 - Connector type, Digit 7 - Unit of Measurement and Digit 8 - Cable assembly length. Single-mode Patch cord or Pigtail N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8
X X X X X X X XXXX
S: SM Riser 2: 2mm 0: pigtail 1: UPC-UPC 1: ST 1: ST
E: SM LSZH 3: 3mm 1: patchcord 2: Null 2: SC 2: SC M : meter
Cable length
XXX.X meter
I: SM Plenum 6: 1.6mm 2: Duplex pigtail 3: APC-APC 3: FC 3: FC
Design, manufacture and deploy worldwide RF and fiber optic total solutions • for telecommunication networksCreate value for our customers through innovative products, customized • services and cost effective solutionsHighest quality standards, state-of-the-art manufacturing facilities and reliable • supply chain management to achieve and exceed customer expectationsSocially responsible to our community and environment we do business in • and committed to employee's personnel development
Value Innovation•
Customer Focus•
Sustainable Growth•
Social Responsibility•
MISSION STATEMENT
CORE VALUE
NETOP COMPANY OVERVIEW
Netop is an international company devoted to providing the total "end-to-end" solution for enabling wireless coverage & optimizing telecommunication networks. We are a modern and dynamic company involved in both site and in-building wireless coverage business, as well as the fiber optic infrastructure business. Netop has capabilities in R&D, manufacturing, logistics and on-site services.
Netop provides both off-the-shelf and customized products for our customers.
Our major offerings include:1) Total Site Solutions 2) In-building Wireless Coverage Solutions3) Customized Components for OEM Customers4) Microwave and Satellite Communication Systems5) Netop Cable Systems6) FTTx-ODN Technologies7) Telecom/OSP Fiber Solutions
Our technical competencies are protected with patents and our products adhere to the highest technical standards.
Netop production base is located in Qingpu Industrial Park, Shanghai. The factory has over 14,000 sqm production facilities with more than 800 employees.
To keep up with technological advancements, our R&D center in the United States is at the heart of technical innovations. We strive to be at the forefront of technology.
Netop also has an expansive sales and marketing network throughout the world. We have over 20 subsidiaries covering Asia Pacific, the Middle East, Africa, Europe and the Americas. Hence, we are able to be in constant contact with our local customers providing them with timely and quality services.
CONTENT
Netop eNd-to-eNd Fttx-odN SolutioN 6
CeNtral oFFiCe SyStem 8Optical Distribution Frame 9
Fiber Splicing and Distribution Patch Panel 13
Feeder CaBle SyStem 16Feeder Cable 17
Fiber Joint Enclosure 24
Fiber Joint Enclosure for Splitter 28
Optical Cable Cross Connecting Cabinet 32
FiBer diStriButioN SyStem 36Splitter Distribution Cabinet 37
Distribution Cable 41
drop CaBle SyStem 46Optical Fiber Distribution Unit 47
Drop Cable for FTTH 51
FiBer termiNatioN SyStem 56Outdoor Optical Terminal Box 57
Fiber Faceplate Box 59
Field-installable Fiber Optic Connector 62
paSSiVe optiCal CompoNeNt 64Optical Splitter 65
Optical Fiber Patch Cord 68
Optical Fiber Adapter and Connector 71
NETOP ENd-TO-ENd FTTx-OdN SOLUTION
Along with the fast deployment of fiber-to-the-x technology and its application worldwide Netop Technology offers an end-to-end infrastructure solution for central office (CO), optical distribution network (ODN) and last-mile architecture. Netop’s broad selection of optical fiber products and end-to-end EPON, BPON and GPON solutions can be customized for your specific next-generation network requirements. Netop’s structural and modular products and configurations can not only meet your present demand, but also support your future life needs in a cost-effective way.
Optical Distribution Network (ODN) is a physical connectivity platform for next-generation broadband and gigabit access network. Netop Technology provides diversified products to build an ODN of high performance and reliability, as well as to provide service of network planning and consultation, and installation supports. Netop offers the highest quality products including Netop fiber optical cables, optical distribution frames (ODF), splitter distribution cabinets (SDC), passive splitters and fiber optic jumpers, specialized drop fiber cable and customer interface box.
End-to-end FTTx-ODN Solutions
End-to-end FTTx-ODN Solutions
The System of Central Office Includes the Following Products:Optical Distribution Frame 9Fiber Splicing and Distribution Patch Panel 13
CENTRAL OFFICE SYSTEM
OPTICAL dISTRIbUTION FRAME
The optical distribution frame (ODF) is applied in the center office, optical cross connection point and network access point in fiber access network projects. It provides such functions as leading in, fixing and splicing, protecting optical cables, storing and managing pigtails, fixing and cross-connecting optical fibers, Meanwhile, enabling safe and reliable routing for connection, distribution and scheduling between optical systems in telecom networks.
Order Information
Netop id Frame type Frame Height Adapter Type Interface Port Count Pigtail LoadedX XX X X XXX X
N-ODF- A:A series 20:2000mm 0:Null 0: Null 000:Null 0: Without pigtail
B:B series 22:2200mm 1:SC 1: UPC 1: With 0.9mm pigtail
C:C series 26:2600mm 2:FC 2: APC
D:CⅡ series 3:LC
E:Open frame
Product Overview1
10
Net
op F
TTx-
OD
N T
echn
olog
ies
Optical Distribution Frame A
FeatureSuit for connect outside optical cables with optical transmission equipment• Convenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
Structural Drawing
SpecificationHigh termination density, maximum 792 fibers• Superior cable management ensure 40mm minimum bend radius• Connector life>1000 times• Connector loss (including Insertion, Change ability and Durability) ≤0.5dB• Change ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection grounding)>3000V (DC) /• min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
FeatureSuit for central offices and cross connection points in the OAN• Convenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
SpecificationHigh termination density, maximum 936 fibers• Superior cable management ensure 40mm minimum bend radius• Connector life>1000 times• Connector loss (including Insertion, Change ability and Durability) ≤0.5dB• Change ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection grounding)>3000V (DC) /• min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
FeatureSuit for trunk transmission and cross connection points of • lower capacity all front accessConvenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
SpecificationHigh termination density, maximum 384 fibers• Superior cable management ensure 40mm minimum bend • radiusConnector life>1000 times• Connector loss (including Insertion, Change ability and • Durability) ≤0.5dBChange ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection • grounding)>3000V (DC) /min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
FeatureSuit for trunk transmission and cross connection points of • lower capacityConvenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
SpecificationHigh termination density, maximum 192 fibers• Superior cable management ensure 40mm minimum bend • radiusConnector life>1000 times• Connector loss (including Insertion, Change ability and • Durability) ≤0.5dBChange ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection • grounding)>3000V (DC) /min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
Fiber splicing and distribution patch panel supports the splicing connection, termination and storage of fiber optic cables. Netop supplies various patch panel in both telescopic-type and fixed-type structure by the same time providing all industry-standard coupler interface including SC, FC, ST, LC, MU, MT-RJ, E2000, DIN and etc. The Netop fiber optic patch panel can be integrated into the EIA 19” rack or multi-media cabinet.
Product Overview2
Netop id X-Height and Type Adapter Type Fiber Count panel Color Structure CodeN-10 X X X X X
1: 1HU fixed distribution panel 1: SC/SC simplex SM 1: 0 fiber 0: Metal 1A: Steel body & front
Twist and pull secure cable supports for Pre-terminated trunk • cable dividers 2 PG21 (29mm) cable inputs• Cable guidance 45°slant backwards, lead-way choice• 4 cable clamping slot cap and divider slot cap• 2 universal supports for simplex, duplex and break-out-cables • Screen print front plate labeling•
ApplicationISO / IEC 8802-3: FOIRL• ISO / IEC 8802-3: 10BASE-FL, FP & FB• ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring• ISO / IEC 8802-5t: 100 Mbit/s Token Ring• ISO / IEC 8802-12: Demand Priority• ATM at 52Mbit/s• ATM at 155Mbit/s• ATM at 622Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s• ISO / IEC 8802-3:1000BASE-SX• ISO / IEC 8802-3: 1000BASE-LX• ISO / IEC 9314-9: FDDI LCF-PMD• ISO / IEC 9314-4: FDDI SMF-PMD• EN ISO / IEC 9314-3: FDDI PMD• ISO / IEC 8802-3: 100BASE-FX• IEEE 802.3: 10GBASE-LX4 • IEEE 802.3: 10GBASE-ER/EW• IEEE 802.3: 10GBASE-SR/SW• IEEE 802.3: 10GBASE-LR/LW•
Fixed Distribution Panel
Telescopic Distribution Panel
Outline Drawing
FeatureCompatible with all factory assembled Pre-terminated cabling • systemHigh reliability• High flexibility• Maximally integrated designing•
Fiber Distribution Panel
15
Netop FTTx-O
DN
Technologies
FeatureSuit for all common types of factory or on-site assembled OF • cables with excellent performance and easy installation High reliability• High flexibility• Maximally integrated designing•
SpecificationDimensions: •
1HU Fixed Splice panel 483 x 250 x 1HU
2HU Fixed Splice panel 483 x 250 x 2HU
1HU Telescopic Splice panel 483 x 300 x 1HU
2HU Telescopic Splice panel 483 x 300 x 2HU
Twist secure supports for max. 2 splice cassettes (1HU)• Twist secure supports for max. 4 splice cassettes (2HU)• 4 cable clamping slot cap and divider slot cap• 2 PG21 (29mm) cable inputs• Cable guidance 45°slant backwards, lead-way choice• 2 universal supports for simplex, duplex and break-out-cables • Screen print front plate labeling•
ApplicationISO / IEC 8802-3: FOIRL• ISO / IEC 8802-3: 10BASE-FL, FP & FB• ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring• ISO / IEC 8802-5t: 100 Mbit/s Token Ring• ISO / IEC 8802-12: Demand Priority• ATM at 52Mbit/s• ATM at 155Mbit/s• ATM at 622Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s• ISO / IEC 8802-3: 1000BASE-SX• ISO / IEC 8802-3: 1000BASE-LX• ISO / IEC 9314-9: FDDI LCF-PMD• ISO / IEC 9314-4: FDDI SMF-PMD• EN ISO / IEC 9314-3: FDDI PMD• ISO / IEC 8802-3: 100BASE-FX• IEEE 802.3: 10GBASE-LX4 • IEEE 802.3: 10GBASE-ER/EW• IEEE 802.3: 10GBASE-SR/SW• IEEE 802.3: 10GBASE-LR/LW•
Fixed Splice Panel
Telescopic Splice Panel
Outline Drawing
Fiber Splice Panel
The System of Feeder Cable Includes the Following Products:Feeder Cable 17Optical Fiber Joint Enclosure 24Fiber Joint Enclosure for Splitter 28Optical Cable Cross Connecting Cabinet 32
FEEdER CAbLE SYSTEM
1FEEdER CAbLE
Feeder fiber optical feeder cable is usually used to connect the optical distribution frame (ODF) in central office (CO) and the splitter distribution cabinet (SDC). The feeder cable can be direct burial, duct installable or aerial fiber optical cable according to different installation and environment conditions. Netop designs, manufactures and supplies all kinds of standard feeder fiber optic cables or per specific customer requirements.
Order Information
Product Overview
Netop id FO Cable Type Fiber Structure
typeSequence No.
Cable Structure Information
Fiber No. Fiber Type Extended Information
N- X X XXX Detail according to catalogue XXX XXXXX
FeatureLight armored stranded gel-filled loose tube cable• With dual plastic steel tape• Comply with DIN VDE 0888-3 and IEC 60794-1• Application: • Duct or cable trays Aerial (Lashed) Direct buriedHigher mechanical properties and other options on request• LSZH jacket or dielectric strength member is available on request•
Armored Direct-burial Fiber Optical Cable
19
Netop FTTx-O
DN
Technologies
Fiber Count
Tube Count
Max. Fiber per Tube
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2~36 6 6 14.0 210 1000/3000 1000/3000
38~72 6 12 15.7 250 1000/3000 1000/3000
74~96 8 12 17.4 290 1000/3000 1000/3000
98~120 10 12 19.0 345 1000/3000 1000/3000
122~144 12 12 20.0 420 1000/3000 1000/3000
Ordering Information
Loose Tube Standard loose tube size with color-coated fibers and gel-filled results in economical use and facilitates installation
Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding
Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation
Waterproof Element The filling compound around the cable core and if necessary water-swellable tape
Aluminum Tape Excellent humidity-resistant
Corrugated Steel Tape Provide rodent resistance for direct buried application
Ripcord Easily ripping the cable jacket and aluminum tape and steel tape
Cable Jacket Double PE jacket strengths the mechanical capability and excellent UV-resistance and provides superior protection against abrasion
Color of Jacket Black
Specification
1 product typeNA1005 = Product No.
2 Center Strength member0 = FRP Strength Member1 = Steel Wire Strength Member
3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape
4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
5 Jacket material01 = PE02 = LSZH
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 144)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NA1005 - □ □ - □□ □□ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
20
Net
op F
TTx-
OD
N T
echn
olog
ies
a-WSQ(ZN)2y
FeatureNon-armored stranded gel-filled loose tube cable• Fig-8 type• With stranded steel wires as the self-support unit• Comply with IEC 60794-1• Application: • Aerial with self-supportHigher mechanical properties and other options on request • Dielectric strength member is available on request•
Figure-8 Type Aerial Fiber Optical Cable
21
Netop FTTx-O
DN
Technologies
Fiber Count
Tube Count
Max. Fiber per Tube
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2~36 6 6.0 9.6*17.8 150 1000/3000 300/1000
38~60 12 6.0 10.2*18.2 157 1000/3000 300/1000
62~72 12 6.0 10.7*18.7 167 1000/3000 300/1000
74~96 12 6.0 12.0*20.0 198 1000/3000 300/1000
98~120 12 6.0 13.7*21.7 229 1000/3000 300/1000
122~144 12 6.0 15.1*23.1 269 1000/3000 300/1000
*Provide different size steel wires (1.0mm, 1.2mm, 1.6mm) according to client different mechanical request.
Loose Tube Standard loose tube size with color-coated fibers and gel-filled results in economical use and facilitates installation
Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding
Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation
Waterproof Element The filling compound around the cable core and if necessary water-swellable tape
Self-Support Unit Stranded steel wires with different size
Ripcord Easily ripping the cable jacket
Cable Jacket PE jacket and excellent UV-resistance and provides superior protection against abrasion
Color of Jacket Black
Specification
Ordering Information
1 product typeNA1011 = Product No.
2 Center Strength member0 = FRP Strength Member1 = Steel Wire Strength Member
3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape
4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
5 Jacket material01 = PE02 = LSZH
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 144)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NA1011 - □ □ - □□ □□ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
22
Net
op F
TTx-
OD
N T
echn
olog
ies
a-WQ(ZN)2y
FeatureNon-armored stranded gel-filled loose tube cable• Ribbon fiber cable• Comply with IEC 60794-1• Application: • Duct or cable Trays Aerial (Lashed)Ribbons are individually numbered for easy identification• Higher mechanical properties and other options on request• LSZH jacket or dielectric strength member is available on request• Can provide ribbon with 4 or 8 fibers structure cable•
Ribbon Fiber Cable
23
Netop FTTx-O
DN
Technologies
Loose Tube Standard loose tube size with color-coated ribbon fibers and gel-filled results in economical use and facilitates installation
Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding
Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation
Waterproof Element The filling compound around the cable core and if necessary water-swellable tape
Ripcord Easily ripping the cable jacket
Cable Jacket PE jacket and excellent UV-resistance and provides superior protection against abrasion
Color of Jacket Black
Specification
Fiber Count
Tube Count
Fiber Count per Tube
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2~36 6 6 10.8 91 600/1500 300/1000
38~72 6 12 12.6 114 600/1500 300/1000
74~96 8 12 13.2 132 1000/3000 300/1000
98~120 10 12 15.6 170 1000/3000 300/1000
122~144 12 12 17.5 185 1000/3000 300/1000
146~192 16 12 17.8 200 1000/3000 300/1000
194~216 18 12 18.1 225 1000/3000 300/1000
218~240 20 12 19.5 253 1000/3000 300/1000
242~288 24 12 22.2 302 1000/3000 300/1000
Ordering Information
1 product typeNA1001 = Product No.
2 Center Strength member0 = FRP Strength Member
3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape
4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
5 Jacket material01 = PE02 = LSZH
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 288)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NA1001 - 0 □ - □□ □□ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
2Order Information
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray TypeN-98G X X X X X(<10) X(<10) X X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores
Fiber joint enclosure is used for jointing the fiber optical cables which are laid directly underground, in duct or aerial. Netop supplies various types of joint enclosure in different structure and with highest-quality mechanical and environment performance.
Product Overview
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray TypeN-98G X X X X X(<10) X(<10) X X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores
FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•
2 12 cores/tray 4 in 4 out Φ5-Φ14 390x180x88 Sticky cincture or silicon gum
5 12 cores/tray 2 in 2 out Φ7-Φ18 460x180x108 Sticky cincture or silicon gum
544
12 cores/tray24 cores/tray72c ribbon/tray
2 in 2 out Φ7-Φ25 492x202x104 Sticky cincture
812 cores/tray24 cores/tray72c ribbon/tray
4 in 4 out Φ7-Φ25 492x200x175 Sticky cincture
In-line Type Fiber Joint Enclosure
27
Netop FTTx-O
DN
Technologies
FeatureFor aerial, and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•
2 6 cores/tray 2 in 2 out Φ7-Φ18 Φ85x330 Silicon gum
2 12 cores/tray 2 in 3 out Φ7-Φ18 Φ100x340 Silicon gum
412 cores/tray16 cores/tray72c ribbon/tray
3 in 3 out Φ7-Φ22 Φ210x440 Silicon gum
4 12 cores/tray24 cores/tray 3 in 3 out Φ7-Φ22 Φ210x440 Silicon gum
Dome Type Fiber Joint Enclosure
3Order Information
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray Type Function Core NumberN-98G X X X X X(<10) X(<10) X X XX X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores A: Optical distribute with SC/APC adaptors 02: 2 cores
2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 3: 3 trays 2: 2 trays 12: 12 cores B: With 1pc 1x8 splitter and splice 04: 4 cores
3: Mussel 3: 3 inlet ports 3: 3 outlet ports 4: 4 trays 3: 3 trays 16: 16 cores C: With 1pc 1x8 splitter and SC/APC distribution 08: 8 cores
… M: With 1pc 1x8 splitter and SC/UPC distribution
H: 24 trays M: With 2pcs 1x8 splitter and splice
… P: With 2pcs 1x8 splitter and SC/UPC distribution
M: 30 trays Q: With 1pc 1x16 splitter and splice
… R: With 1pc 1x16 splitter and SC/UPC distribution
Q: 36 trays S: Splice and SC/UPC distribution
…
S: 40 trays
FIbER JOINT ENCLOSURE FOR SPLITTER
Splitter joint enclosure is pre-assembled and tested with optical splitters inside enclosure for distributing the power transmitted from feeder cable to distribution cables. Netop’s unique design includes the features of high capacity and easy installation.
Product Overview
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray Type Function Core NumberN-98G X X X X X(<10) X(<10) X X XX X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores A: Optical distribute with SC/APC adaptors 02: 2 cores
2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 3: 3 trays 2: 2 trays 12: 12 cores B: With 1pc 1x8 splitter and splice 04: 4 cores
3: Mussel 3: 3 inlet ports 3: 3 outlet ports 4: 4 trays 3: 3 trays 16: 16 cores C: With 1pc 1x8 splitter and SC/APC distribution 08: 8 cores
… M: With 1pc 1x8 splitter and SC/UPC distribution
H: 24 trays M: With 2pcs 1x8 splitter and splice
… P: With 2pcs 1x8 splitter and SC/UPC distribution
M: 30 trays Q: With 1pc 1x16 splitter and splice
… R: With 1pc 1x16 splitter and SC/UPC distribution
Q: 36 trays S: Splice and SC/UPC distribution
…
S: 40 trays
30
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•
SpecificationFiber additional attenuation: ≤0.01dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance:≥1000N/100mm (Aerial and duct)• Outside dimension: Φ278 x560mm• Suitable for Ф7-Ф25mm cable• Compatible with 2pcs 1×8 splitter or 1pc 1×16 splitter• 6 cable entry ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 20 • Up to splice 240 fiber counts•
98G221166C-D12H18 192F, Dome, Fiber Joint Closure, with 20xSC/APC termination panel
Dome Fiber Joint Enclosure for Splitter
31
Netop FTTx-O
DN
Technologies
FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• level of protect: IP68•
Optical Cable Cross Connecting Cabinet (hereafter named OCC) is used to connect the fiber trunk cable and the distribution cable between the interface device, which has the import of cable, fastness, grounding protection, welding, jumping (distribution), storage, switching and other functions. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk cable and distribution side, can achieve the fiber optic lines linked, distributed and transited easily.
Product Overview
N-Netop id Max. Distribution Capacity Adapter Type Interface Body Material Operation Type Core Number Require Pigtail LoadedOCC- XXX X X X X XXX X
144 0: Null 0: Null 1: SMC A: Single face 024: 24 cores 0: Without pigtail
288 1: SC simplex 1: UPC 2: Stainless steel B: Double face 072: 72 cores 1: With 0.9mm pigtails
FeatureCabinet is made of high strength stainless steel, protection • class IP65, high intension, corrosion-resistant, all-weather protection and can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and • distribution with physical protection, prevent the optical fiber cable from accidental damage. Cable entrance from the rack at the bottom and be fixed, • grounding and protection. The series OCC bottom has four φ13 holes, which can be • pre-installed into the M10 expansion bolts on the base. Put on the OCC with the fastening nut.
SpecificationOCC standard: YD/T988-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life>1000 times • Insulation resistance (between frame and protection • grounding)>20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• >3000V(DC)/1min no breakdown, no arc Dimension: 1450×750×320 mm • Installation dimension: 700mm×200 mm • Single side operation • Weight: 185 Kg•
FeatureCabinet is made of high strength stainless steel, protection • class IP65, high intension, corrosion-resistant, all-weather protection and can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and • distribution with physical protection, prevent the optical fiber cable from accidental damage. Cable entrance from the rack at the bottom and be fixed, • grounding and protection. The series OCC bottom has four φ13 holes, which can be • pre-installed into the M10 expansion bolts on the base. Put on the OCC with the fastening nut.
SpecificationComply with YD/T998-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life>1000 times • Insulation resistance (between frame and protection • grounding)>20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• >3000V(DC)/1min no breakdown, no arc. Dimension: 1350×650×320 mm • Installation dimension: 600×200 mm • Single side operation • Weight: 150 Kg•
288F Stainless Cabinet144F Stainless Cabinet
35
Netop FTTx-O
DN
Technologies
A: Double-layer stainless steel cabinetB: Optical Fiber Fusion and Distribution Intergrated ModuleC: Optical splice UnitD: Cable import UnitE: Double-layer stainless steel front doorF: Cabinet bottom
Accessories Name Qty UnitOcc User Manual 1 ea
Proved Certification 1 ea
Expansion Screw 4 set
Nylon Ties 20 ea
Key 1 set
Fiber Protecting Tube 1 set
Fiber Heat-shrinkable Tube 1 set
3M Tape 1 ea
FeatureCabinet is made of high strength stainless steel, protection class IP65, high intension, corrosion-resistant, all-weather protection and • can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and distribution with physical protection, prevent the optical fiber cable from • accidental damage. Cable entrance from the rack at the bottom and be fixed, grounding and protection. • The series OCC bottom has four φ13 holes, which can be pre-installed into the M10 expansion bolts on the base. Put on the OCC • with the fastening nut.
SpecificationOCC standard: YD/T988-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life>1000 times • Insulation resistance (between frame and protection • grounding)>20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• >3000V(DC)/1min no breakdown, no arc Dimension: 1450×750×320 mm • Installation dimension: 700×460 mm • Double side operation • Weight: 225 Kg•
576F Stainless Cabinet
FIbER dISTRIbUTION SYSTEM
The system of Fiber Distribution Includes the Following Products:Splitter Distribution Cabinet 37Distribution Cable 41
1SPLITTER dISTRIbUTION CAbINET
Netop splitter distribution cabinet (SDC) can provide extreme-high distribution capacity by applying high split-ratio components and state-of-art mechanical design techniques. The double-sided operation and modular design make the SDC installation and maintenance very easily, as well that it is convenient for future system expansion.
Order Information
Product Overview
Netop id Envirement Adapter
type Interface Cabinet Material
Operation type Installation
max. Distribution Capacity
Pigtail Loaded
N-SDC- X X X X X X XXX X
1: Outdoor 1: SC simplex 1: UPC 1: SPCC A: Single face 1: Wall mount 032 0: Without pigtail
2: Indoor 2: SC duplex 2: APC 2: Stainless steel B: Double face 2: Free-standing 072 1: With 0.9mm pigtails
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Double-sided operation(front and rear), divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points• Various interface available SC, FC or LC•
SpecificationMax fiber capacity: 384• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 12pcs 1×32 (2×32) splitter modules or 24pcs 1×16 splitter modules• Parking lot accommodates up to 288 splitter output ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Supports pre-terminated cable or splicing cable• Dimension mm: 1200×600×320• Operating temperature: -40• ℃~+60℃
Front Rear
Splitter Distribution
Cable Distribution
Earthing Sheet Copper
Pre-terminated Cable
Splitter Module
Splice Tray
Parking Lot
384-fiber Splitter Distribution Cabinet
39
Netop FTTx-O
DN
Technologies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Double-sided operation(front and rear), divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points• Various interface available SC, FC or LC•
SpecificationMax fiber capacity: 192• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs • 1×16 splitter modulesParking lot accommodates up to 144 splitter output ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Supports pre-terminated cable or splicing cable• Dimension mm: 900×600×300• Operating temperature: -40• ℃~+60℃
192-fiber Splitter Distribution Cabinet
Splitter Distribution
Splitter Module
Parking Lot
Pre-terminated Cable
Cable Distribution
Splice Tray
40
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureBody case is made of high-quality steel sheet, surface plastic • spraySingle-sided operation, divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points•
SpecificationMax fiber capacity: 144• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs • 1×16 splitter modulesParking lot accommodates up to 64 splitter output ports• Modular structure: 12pcs termination and splicing modules• Supports pre-terminated cable or splicing cable• Dimension mm: 1000×600×300• Operating temperature: -40• ℃~+60℃
32-fiber Splitter DistributionCabinet
FeatureBody case is made of high-quality steel sheet, surface plastic • spraySingle door, front operation, divided management• Wall mount and pole mount available• Suitable for outdoor installation with IP65 protection• Various interface available SC, FC or LC•
SpecificationMax fiber capacity: 32• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 4 outdoor cables• Supports up to 1pc 1×32 (2×32) splitter modules or 2pcs • 1×16 splitter modulesParking lot accommodates up to 32 splitter output ports• 6 cores and 12 cores splicing tray available• Modular structure: 12pcs termination and splicing modules• Dimension mm: 500×480×110• Operating temperature: -40• ℃~+60℃
144-fiber Splitter DistributionCabinet
Left area for Splicing and cabling
Right area for splitting and parking
Outlet Cable
Inlet Cable
Earthing Sheet Copper
Splitter Module
Splice Tray
Parking Lot
2dISTRIbUTION CAbLE
Fiber optic distribution cable can be made of indoor or outdoor sheathed jackets for different environment conditions, and which function is to get the splitter distribution cabinet (SDC) and fiber distribution (FDU) linked. Netop is able to design and make it to the specific configuration requirements.
Order Information
Product Overview
Netop id
FO Cable type
Fiber Structure type
Sequence No.
Cable Structure Information Fiber No. Fiber Type Extended
Information
N- X X XXX Detail according to catalogue XXX XXXXX Detail according to
Feature Large cores distribution indoor cableWith aramid yarn as strength member
Halogen-free jacket
Comply with DIN VDE 0888-6 and IEC 60794-2• Application: • Premises distribution system Horizontal backbone cabling Indoor LAN InterconnectHigher mechanical properties and other options on request • Dielectric strength member is available on request•
0.9mm Distribution Cable
43
Netop FTTx-O
DN
Technologies
Buffer 0.9mm tight buffer or semi-tight buffer
Buffer Color The standard color refer to color code on page 6 of <Netop Cable Systems>
Strength Member Aramid yarn
Subunit 6 cores of 0.9mm buffers
Subunit Jacket Flame-retardant and low smoke halogen-free jacket
Central Member FRP as the dielectric member for central strength element with no bonding
Ripcord Easily ripping the cable jacket
Cable Jacket Flame-retardant and low smoke halogen-free jacket and excellent UV-resistance
Color of Jacket and Subunit Jacket
Yellow for single modeOrange for multi modeAqua for OM3Other standard color on request on page 6 of <Netop Cable Systems>
Specification
Fiber Count Subunit Count
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
24 4 10.4 85 400/1300 300/1000
36 6 13.5 95 400/1300 300/1000
42 7 14.6 185 400/1300 300/1000
48 8 15.7 265 400/1300 300/1000
60 10 18.2 320 400/1300 300/1000
72 12 20.5 440 400/1300 300/1000
Ordering Information
1 product typeNI3013 = Product No.
2 Jacket ColorYL = Yellow…See Netop Color Code on Page 6 of <Netop Cable Systems>
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count024 = 24 Cores…Others (036 to 072)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NI3013 - □□ 0 2 - RD □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
4 Fan-out unit diameterRD = Round Cable
44
Net
op F
TTx-
OD
N T
echn
olog
ies
Buffer 0.9mm tight buffer or semi-tight buffer
Buffer Color White or other standard color on page 6 of <Netop Cable Systems>
Strength Member Aramid yarn
Subunit 2.0mm or 3.0mm
Subunit Jacket Flame-retardant and Low Smoke Halogen-free jacket
Central Member FRP as the dielectric member for central strength element with no bonding
Ripcord Easily ripping the cable jacket
Cable Jacket Flame-retardant and Low Smok Halogen-free jacket and excellent UV-resistance
Color of Jacket and Subunit Jacket
Yellow for Single ModeOrange for Multi ModeAqua for OM3Other standard color on request on page 6 of <Netop Cable Systems>
I-V(ZN)HH -BREAK-OUT
Specification
FeatureMulti cores breatout cable with 2.0mm and 3.0mm subunits• With aramid yarn as strength member• Halogen-free jacket• Comply with DIN VDE 0888-6 and IEC 60794-2• Application: • Premises distribution system Horizontal backbone cabling Indoor LAN InterconnectHigher mechanical properties and other options on request • Dielectric strength member is available on request•
2.0mm Distribution Cable
45
Netop FTTx-O
DN
Technologies
Fiber Count Subunit Count Diameter mm
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2 2.0 5.9 28 250/800 300/1000
4 2.0 5.9 39 250/800 300/1000
6 2.0 8.3 70 250/800 300/1000
8 2.0 8.1 76 300/1000 300/1000
12 2.0 10.4 80 300/1000 300/1000
16 2.0 11.3 103 500/1500 300/1000
24 2.0 13.9 160 500/1500 300/1000
2 3.0 7.7 50 250/800 300/1000
4 3.0 7.7 59 250/800 300/1000
6 3.0 10.4 88 250/800 300/1000
8 3.0 12.3 122 300/1000 300/1000
12 3.0 13.5 128 300/1000 300/1000
16 3.0 15.5 185 500/1500 300/1000
24 3.0 19.3 288 500/1500 300/1000
Ordering Information
1 product typeNI3014 = Product No.
2 Jacket ColorYL = Yellow…See Netop Color Code on Page 6 of <Netop Cable Systems>
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 024)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NI3014 - □□ 0 2 - □□ □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
4 Sub unit diameter20 = 2.0mm30 = 3.0mm
dROP CAbLE SYSTEM
The System of Drop Cable Includes the Following Products:Optical Fiber Distribution Unit 47Drop Cable for FTTH 51
1OPTICAL FIbER dISTRIbUTION UNIT
Distribution cable and drop cable is connected in between the optical fiber distribution unit (FDU), which is an important part of the whole optical distribution network (ODN). Netop’s FDU is very flexible on capacity and coupling interface configuration requirements. Both indoor and outdoor applicable FDU are available from Netop Technologies.
Order Information
Product Overview
Envirement Adapter Type Interface Cabinet Material Max. Capacity Splice Tray/PigtailN-FDU- X X X X XXX X
1: Outdoor 0: No adapter 0: No adaptor 1: SPCC 002: 2 cores A: No splice tray
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•
SpecificationMax fiber capacity: 72• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃
Outdoor FDU
49
Netop FTTx-O
DN
Technologies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•
SpecificationMax fiber capacity: 24• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃
Outdoor FDU with Adapter
50
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•
SpecificationMax fiber capacity: 72• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃
P/N Description Dimension W x H x D mm Splice Tray Counts Max.N-FDU-1001012B 12F Outdoor FDU, SPCC 230 x 350 x 100 1
N-FDU-1001024B 24F Outdoor FDU, SPCC 230 x 350 x 100 2
N-FDU-1001048B 48F Outdoor FDU, SPCC 230 x 350 x 110 4
N-FDU-1111024D 24F Outdoor FDU,SC/UPC simplex, SPCC 230 x 350 x 110 2
N-FDU-1111048D 48F Outdoor FDU,SC/UPC simplex, SPCC 350 x 380 x 110 4
N-FDU-1121004D 4F Outdoor FDU,SC/APC simplex, SPCC 200 x 250 x 55 1
N-FDU-1121096D 96F Outdoor FDU,SC/APC simplex, SPCC 500 x 480 x 200 8
N-FDU-1411008A 8F Outdoor FDU,LC/UPC duplex, SPCC 240 x 290 x 70 0
N-FDU-1411012D 12F Outdoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1
N-FDU-1412024A 24F Outdoor FDU,LCD/UPC, stainless steel 240 x 290 x 80 0
N-FDU-2001012B 12F Indoor FDU, SPCC 190 x 290 x 80 1
N-FDU-2001024B 24F Indoor FDU, SPCC 190 x 290 x 80 2
N-FDU-2001048B 48F Indoor FDU, SPCC 190 x 290 x 100 4
N-FDU-2111012D 12F Indoor FDU,SC/UPC simplex, SPCC 250 x 200 x 70 1
N-FDU-2111024D 24F Indoor FDU,SC/UPC simplex, SPCC 300 x 310 x 85 2
N-FDU-2111048D 48F Indoor FDU,SC/UPC simplex, SPCC 300 x 310 x 100 4
N-FDU-2411012D 12F Indoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1
N-FDU-2411024A 24F Indoor FDU,LCD/UPC, SPCC 240 x 290 x 80 0
N-FDU-2411024C 24F Indoor FDU,LCD/UPC, SPCC, with pigtail 240 x 290 x 80 2
N-FDU-2411048C 48F Indoor FDU,LCD/UPC, SPCC, with pigtail 250 x 350 x 90 4
Indoor FDU
Splice Tray
Inlet Cable
Drop Cable
2dROP CAbLE FOR FTTH
Netop offers the compact, durable and self-supporting micro FTTH fiber cable in full-dry construction, and which supports the last-mile of the passive optical distribution network (ODN). The Netop micro FTTH cable can be for direct burial, duct or aerial installation as options.
Product Overview
Order Information
Netop id FO Cable Type Fiber Structure
typeSequence No.
Cable Structure Information
Fiber No. Fiber Type Extended Information
N- X X XXX Detail according to catalogue XXX XXXXX
Feature Micro cable for FTTHWith FRP as strength member
Halogen-free jacket
Comply with IEC 60794-2• Application: • Installation in small bending environment indoor FTTx project for Indoor cableBending radius can be achieved up to 15mm• G.657 fiber is recommended for this cable• Higher mechanical properties and other options on request • Dielectric strength member is available on request•
Drop Cable
53
Netop FTTx-O
DN
Technologies
Fiber Count
Nominal Cable Diameter mm Fiber Structure Nominal Cable
Weight Kg/KmTensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
1 2.0*3.0 0.25mm 8.1 30/60 300/1000
2 2.0*3.4 0.25mm*2 8.5 30/60 300/1000
4 2.0*4.0 Ribbon fiber 9.8 30/60 300/1000
Fiber Type 250μm fiber or ribbon fiber
Fiber Color Standard color on page 6 of <Netop Cable Systems>
Strength Member Two parallel FRPs as the dielectric members for strength element with no bonding
Cable Jacket Flame-retardant and Low Smoke Halogen-free jacket and excellent UV-resistance
Color of Jacket Black or other standard color on request on page 6 of <Netop Cable Systems>
Specification
Ordering Information
1 product typeNS1001 = Product No.
2 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count001 = 1 Core…Others (002 to 004)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NS1001 - □□ 02 - □ □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
54
Net
op F
TTx-
OD
N T
echn
olog
ies
i-(ZN)H –Fly
Feature Drop micro cable for FTTH with steel for dragWith FRP as strength member
Helogen-free jacket
Comply with IEC 60794-2• Application: • Installation in small bending environment indoor/outdoor FTTx project for indoor cableG.657 fiber is recommended for this cable• Higher mechanical properties and other options on request • Dielectric strength member is available on request•
Aerial Drop Cable
55
Netop FTTx-O
DN
Technologies
Fiber Count
Nominal Cable Diameter mm Fiber Structure Nominal Cable
Weight Kg/KmTensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
1 2.0*5.0 0.25mm 19.1 60/120 300/1000
2 2.0*5.0 0.25mm*2 20.1 60/120 300/1000
4 2.0*5.6 Ribbon fiber 22.5 60/120 300/1000
Fiber Type 250μm fiber or ribbon fiber
Fiber Color Standard color on page 6 of <Netop Cable Systems>
Strength Member Two parallel FRPs as the dielectric members for strength element with no bonding
Drag Member Steel
Cable Jacket Flame-retardant and Low Smoke and Halogen-free jacket and excellent UV-resistance
Color of Jacket Black or other standard color on request on page 6 of <Netop Cable Systems>
Specification
Ordering Information
1 product typeNS1002 = Product No.
2 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count001 = 1 Core…Others (002 to 004)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NS1002 - □□ 02 - □ □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
FIbER TERMINATION SYSTEMThe System of Fiber Termination Includes the Following Products:Outdoor Optical Terminal Box 57Fiber Faceplate Box 59Fast Field-assembly Splicing and Connecting Product 62
1OUTdOOR OPTICAL TERMINAL bOx
Outdoor optical terminal box is used for terminating drop cable in outdoor environment. Working as the customer FTTH application interface, Netop optical terminal box is applicable for site-splicing, field-installable connector termination or mechanical splice installation.
Order Information
Product Overview
Envirement Adapter Type Interface Cabinet Material Max. Capacity Splice Tray/PigtailN-FDU- X X X X XXX X
1: Outdoor 0: No adapter 0: No adaptor 1: SPCC 002: 2 cores A: No splice tray
FeatureSuitable for the protective connection between cables and pigtails• Suitable for simplex and duplex different adapter.• Lockable door providing good security•
SpecificationSuitable for 4 fibers indoor drop cable• Fiber bending radius: ≥30mm• Products classification: pole mounted, wall mount. • IP65 protection for outdoor environment• Dimension: 200 x 250 x 55• Operating temperature: -40• ℃~+85℃
Outdoor Optical Terminal Box
2FIbER FACEPLATE bOx
Netop fiber faceplate box works as the customer Fiber To The Desk (FTTD) application interface, which is specially designed to adopt the drop cable installations by having unique structure inside for excessive cable storage by maintaining good bending radius of the cable. The box is applicable for site-splicing, field-installable connector termination or mechanical splice installation.
Order Information
Product Overview
Netop id Adapter Type Fiber Number Series Customer IDN-FFB- X X X X: First letter of customer's name
1: SC/APC simplex 0: without pigtail A: A type N: Netop standard
2: SC/UPC simplex 1: 1 fiber B: B type
3: SC/APC duplex 2: 2 fiber C: C type
4: SC/UPC duplex 4: 4 fiber
5: LC/APC duplex
6: LC/UPC duplex
7: FC/APC simplex
8: FC/UPC simplex
60
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureTop and bottom cable entry hold available• With hinge and lock protection• Compatible with three connect methods • a. Directly connect drop cable with field assembled fast connector b. Connect drop cable and pigtail with mechanical splice unit c. Connect drop cable and pigtail by using heat splicing method
SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 160mmX96mmX30mm•
1
5
2 3 4
FeatureTop and bottom cable entry hold available• Compatible with three connect methods • a. Directly connect drop cable with field assembled fast connector b. Connect drop cable and pigtail with mechanical splice unit c. Connect drop cable and pigtail by using heat splicing method
SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 86mmX86mmX30mm•
Fiber Entry HoleFixing Slot for Fusion Splicer Protection Tube
Fiber Faceplate Box -Type A Fiber Faceplate Box- Type B
61
Netop FTTx-O
DN
Technologies
FeatureFFB type C are used to connect workplace computers with the horizontal • fiber-optic installationConnectivity system ST, SC-duplex, LC-duplex and MT-RJ are supported• Fit with standard 86x86mm wall back box • 45 degree angled outlet without coupler / keystone attached • Fiber optic adapters or modules available • Delivered with installation screws and labeling system•
SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 86mmX86mmX30mm•
Fiber Faceplate Box- Type C
FIELd-INSTALLAbLE FIbER OPTIC CONNECTOR
Netop field-installable fiber optic Connector includes both SC and FC types, which take the advantage of the latest Netop rapid ready-termination technology. The Netop field-installable fiber optic connector provides high-quality mechanical and optical performance which meet or exceed the factory-installed fiber optic connectors.
Product Overview3
Order Information
Netop id Fiber Type Cable Type Connector Type Interface Type SeriesN-FC- X X XX X X
C: SingleMode & MultiMode 2: 250 µm SC: SC connector U: UPC A: A type
S: SigleMode 9: 900 µm FC: FC connector A: APC
M: MultiMode 3: 2.0 mm & 3.0 mm LC: LC connector
F: 3.1x2.0mm figure-8 drop cable
63
Netop FTTx-O
DN
Technologies
N-FC-CxSCUA
Figure -8 drop cable stripper
ClampField Assembly Connector Construction
Coat Stripper
Clamp for N-FC-CxSCUA
N-FC-CxFCUA
item Technical ParametersFiber Mode Single & multi mode
Drop-off Test (Drop-off Height 4m, Once per Direction, Totally 3 Times) △ IL ≤ 0.2dB △ RL ≤ 5dB
FeatureBased on the unique Netop pluggable non-preset tube • technology.Precision ceramic components with co-axial self centering, • excellent and durable optical property.Optical fiber fits axially in elastic way and avoids completely • any false connect.Triple clamping through the naked fiber, tight buffer and cable, • etc., can be used as patchcord.High on-line tensile strength of optical fast connector after • terminating, always keep connectingUnder the force from cabling and drawing.• Integrated protection of the casing to withstand harsh user • environment.Directly connectable with ONU without any optical socket, • which reduces FTTH cost.High success rate and easiness in installation with average • splicing time 100 sec.Lower requirement for the habit working and work environment • call for to the builder .Visible Installation quality; independent from any far end light • source and special device satisfyingCabling construction in any sectioned way•
Specification
SC series:
Related tools:
FC series:
Fast Termination Connector
PASSIVE OPTICAL COMPONENTThe System of Passive Optical Component Includes the Following Products:Optical Splitter 65Optical Fiber Patch Cord 68Optical Fiber Adapter and Connector 71
Order Information
Netop id Input Port Output Port Fiber Length Grade Fiber TypeN-RPS X XX XX X X
1: 1 port 02: 2 ports 10: 1.0m 1: Grade P 1: 250μm
2: 2 port 03: 3 ports 15: 1.5m 2: Grade S 2: 900μm
04: 4 ports Customized
06: 6 ports
08: 8 ports
12: 12 ports
16: 16 ports
24: 24 ports
32: 32 ports
64: 64 ports
0A: 128 ports
1
Netop id Input Port Output Port Fiber Type Fiber Length Connector/Adapter Type
Netop fiber optical splitter can be supplied in different forms, and which provides function of distributing down-link data and converge up-link data. It adopts TDM technology on the down-link and implements RDM-related access protocols on the up-link. To satisfy the requirements of the different application scenarios Netop designs, produces and supplies 19” rack-mountable, modular or individual packed splitter products by applying the most compact integration techniques.
Note: All measurements were done at room temperature and specifications exclude connectors.
FeatureLow insertion loss and PDL• FBT and PLC technology• Wide operation wavelength and temperature• High reliability and stability • 1 or 2 input channel • 4, 8, 16, 32 and 64 output channel available• Flexible fanout length and various connector type available•
9 Packaging Size(L x W x H) mm 40x4x4 40x4x4 40x4x4 50x7x4 60x12x4
Specification
Note: All measurements were done at room temperature and specifications exclude connectors.
FeatureMade of high quality steel sheet or ABS, surface plastic spray• Modularized design, convenient for installation and maintenance • Fiber additional attenuation: ≤0. 1dB• Coiling radius of internal ribbon fiber: >30mm• Operating temperature: -40• ℃~+80℃
Fiber riveted by crimp body at root• Fiber protected by strain relief at root• 1 or 2 input channel• 4, 8, 16, 32 and 64 output channel available• Multi-interface and length to be chosen•
Splitter Module
2Order Information
Single-mode Patch cord or Pigtail
Netop id Fiber Type Diameter Product Type Interface A Interface A Interface B Unit LengthN-98C X X X X X X X XXXX
S: SM riser 2: 2mm 0: Pigtail 1: UPC-UPC 1: ST 1: STM: Meter
Cable length
E: SM LSZH 3: 3mm 1: Patchcord 2: Null 2: SC 2: SC XXX.X meter
I: SM plenum 6: 1.6mm 2: Duplex pigtail 3: APC-APC 3: FC 3: FCF: Feet
Netop fiber optic patchcord and pigtails, in simplex, duplex or other customized forms are mainly used to link up patch panels and to interconnect the work outlets. Netop supplies all industry-standard connector and cable assemblies which comply with and tested to TIA/IEC standards. The products are 100% tested and individually packed.
Special Patch Cord & Pigtail
Product Overview
Netop id Fiber Type Diameter Product Type Interface A Interface B Unit LengthN-SPC- X X X X X X XXX
A: G.652D A: 2.0mm armorerd cable 1: Pigtail 0: Null 0: Null M: Meter XX.X meter
E: Figure-'8' aerial drop cable 4: LC/UPC 4: LC/UPC
5: FC/APC 5: FC/APC
6: FC/UPC 6: FC/UPC
70
Net
op F
TTx-
OD
N T
echn
olog
ies
Number of fiber 1 2 2Cable Construction Simplex Duplex Mini-Zip-Cord
Cable Cross Section 2.9mm 5.8*2.9mm 1.8*3.7mm
Max. Tensile Strength 400 400 400
Max. Crush Resistance N/cm 15 30 30
Min. Bending Radius mm 30 30 30
Temperature Range
Storage -25 ~ +70
In Operation -5 ~ +70
Specification
FeatureAvailable for all common types of • connectivity systemsCable option: • 0.9mm buffered fiber 1.6-2.0mm simplex/duplex cable 3.0mm simplex/duplex cable Other cable type upon request
Fiber option: • SM G.652D, G.657A and G.657BConnector option: • LC, FC, SC, ST, MU, MT-RJ, MTPUPC & APC polishing available• OFNR, OFNP, LSZH outer sheath • available
Single Mode IL Typical IL Maximum RL Typical RL Maximum
SC; LCUltra UPC 0.20 dB 0.30 dB -55 dB -45dB
Angle APC 0.20 dB 0.30 dB -70 dB -60dB
type Outer Diameter Weight Max.Tensile Strength N Max.Crush
Resistance N/10cm Min Bending Radius
GJFJH-1 4.0mm 19Kg/KmShort term Long term short term Long term Installation Working
200 100 3000 1000 60mm 30mm
Working Temperature -20~+60
Transmission Index@1310nm @1550nm
≤ 0,38dB/Km ≤ 0,25dB/Km
Specification
Feature15mm and 7.5mm small bending radius• No permanent deformation after bending• LC comply with IEC 61754-20• SC comply with TIA/EIA 568, IEC 874-10• The insertion loss test acc.to IEC 61300-3-4• The return loss test acc.to IEC 61300-3-6• SC/UPC and SC/APC connector available•
Optical Fiber Patch Cord / Pigtail
Ultra-flexible patch cord
OPTICAL FIbER AdAPTER ANd CONNECTOR
The fiber-optic couplers are used to link fiber-optic connectors terminated on a fiber-optic cable and are usually mounted in 19” patch panels and fiber face box. Netop couplers provide a saving through low insertion loss interconnection because the fiber is precisely aligned by a ceramic sleeve. The metal body ST- and SC-couplers guarantee a high mechanical long-term stability and reproducible mating. The Small-Form-Factor LC and MT-RJ-coupler enable an increase of density by 100% through interconnecting two fibers provided by the referring MT-RJ and LC-duplex connector.
Product Overview3
72
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureFC specification according to IEC60874-7 • Twist protection pin • End face geometry ferrule: convex • Materials: • Ferrule: zirconia ceramic Connector body: brass, nickel plated
FeatureComply with international standards • Low coupling loss • Single mode or multimode or both • Metal or plastic housing • Bronze or ceramic alignment sleeves • Simplex or duplex • Flange-less or w/ flange • Hybrids•
SpecificationAdapter C-sleeve material: • CeramicColor rule for composite plastic adapter: • Blue: SM, Beige: MM, Green: SM APCInstallation: • With or without mounting flange/ square or D-D mounting flangeInsertion loss: • <= 0.2dB against reference connectorsOperating temperature: • -40℃ ~ +75℃
Optical Fiber Adapter
FeatureEN 50173 recommended connector • With push-pull-locking mechanism • SC specification according to TIA/EIA 568 AND IEC874-14• Materials: • Ferrule: zirconia ceramic Connector body: composite plastic
SpecificationInsertion loss (typical): 0.20dB• Fiber types: G62.5/125um, G50/125um,E9/125um • Cable adaption: 0.9mm, 2.0mm, 2.9mm • Other cable adaptions upon request•
SpecificationInsertion loss (typical): 0.20dB• Fiber types: G62.5/125um, G50/125um,E9/125um • Cable adaption: 0.9mm, 2.0mm, 2.9mm • Other cable adaptions upon request•
SC Fiber Optic Connector FC Fiber Optic Connector
Fiber Optic Connector
73
Netop FTTx-O
DN
Technologies
FeatureSmall form factor connectivity system, high end cabling for telecomand LAN, within single-mode application• Materials: • Ferrule: zirconia ceramic, diameter 1.25mm Connector body: composite plastic
SpecificationInsertion loss (typical) : 0.1dB• Cable adaption: • 0.9mm buffered fiber 1.6 ~ 2.0mm simplex/duplex cable 2.9mm simplex/duplex cable Other cable adaptions upon request• Other fiber optic connector•
LC Fiber Optic Connector
Other Connector Can Be Provided upon Request.
FC Fiber Optic Connector
74
Net
op F
TTx-
OD
N T
echn
olog
ies
NETOP SERVICENetop offers professional services that improve network design, reliability, scalability and efficiency.
Our service core competences include:Network optimization • Technical consultation • Customized product design • Installation & commissioning • Onsite training & supervision • System troubleshooting• After-sales services•
In addition, we also offer professional training, technical support and workshops for distributors and agents. We are committed to offering our services in anyway, anywhere and at anytime.
Netop is much more than just a supplier – Netop is a valued development partner and we will strive to devote all effort to meet new challenges in order to scale to new heights.