Product End-of-Life Disassembly Instructions Product Category: Servers Marketing Name / Model [List multiple models if applicable.] HP ProLiant BladeSystem c7000 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Item Description Notes Quantity of items included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 10 sq cm 9 Batteries All types including standard alkaline and lithium coin or button style batteries 1 Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Includes background illuminated displays with gas discharge lamps Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers EL-MF877-00 Page 1 Template Revision A Components, parts and materials containing radioactive substances
10
Embed
Product End-of-Life Disassembly Instructionsh22235.€¦ · 1. Remove thumb-screws (4) on the rear chassis assembly (see Attachment 1) and use handles to pull out the rear-chassis
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Marketing Name / Model [List multiple models if applicable.] HP ProLiant BladeSystem c7000 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description Notes Quantity of items included in product
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
9
Batteries All types including standard alkaline and lithium coin or button style batteries
1
Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm
Includes background illuminated displays with gas discharge lamps
Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height
External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent chambers, and service stations.
Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers
EL-MF877-00 Page 1 Template Revision A
Components, parts and materials containing radioactive substances
EL-MF877-00 Page 2 Template Revision A
2.0 Tools RequiredList the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if
applicable) Torx Driver T-15Philips Driver # 2Flat Head Screw Driver Medium 3.0 Product Disassembly Process3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove thumb-screws (4) on the rear chassis assembly (see Attachment 1) and use handles to pull out the rear-chassis assembly. Midway through pulling out the assembly, be sure to depress the side-latches on the left and right side of the assembly. (See Attachment 2)
2. Locate the midplane on the rear-chassis assembly, and remove all the screws that connect the air-baffling mask to the midplane (See Attachment 3). Remove the air-baffling mask.
3. Remove all the screws on the Midplane in order to remove the midplane assembly from the chassis. (See Attachment 4)
4. On the back side of the Midplane Assembly, unscrew the screws for attaching the Fan board PCBs (see Attachment 5). There are two fan boards to remove. (See yellow highlight).
5. Remove all the screws that connect the power board PCB to the bus-bar legs. (See Attachment 6) 6. The Midplane PCB can now be removed as well. Be sure to disconnect any cables attached to the Midplane. 7. Locate the LCD Transition board along the side of the main chassis. (See Attachment 7) Remove the designated
screws. 8. On the front of the main chassis, unscrew the designated screws and remove the panels. This should allow you to
disengage the LCD cable and remove the LCD display for disposal. (See Attachment 8) 9. Locate the screws that secure the panel that houses the LCD transition board. Remove the panel and remove the
LCD transition board PCB. (See Attachment 9) 10. Locate the LCD Paddle Board PCB on the rear cage. Remove the designated screws and remove the PCB. (See
Attachment 10) 11. Locate the Onboard Administrator Tray. Use the latch to remove the entire tray. Then, remove any Onboard
Administrator Modules that are in the tray. (See Attachment 11) 12. Remove the screw that is in the middle of the tray. Remove the corresponding panel, and you should find two PCBs to
remove: an Interposer Board PCB and a Link Board PCB. (See Attachment 12) 13. On the Onboard Administrator Module that was removed, depress the button in the center and remove the top panel.
(See Attachment 13) Remove the PCB and look for the Yellow battery. This battery can be removed from its corresponding IC by using your fingers. (See Attachment 14)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1 – Removing Rear Chassis Assembly
Attachment 2 – Latches on the side of the Rear Chassis Assembly
Attachment 3 – Removing the Air Baffling Mask
Attachment 4 -- Removing the Midplane Assembly
Attachment 5 – Removing the Fan Board PCBs
Attachment 6 – Removing the Power Board PCB
Attachment 7 – Locating the LCD Transition Board PCB
Attachment 8 – Removing the LCD Module and the LCD cable panels
Attachment 9 – Removing the LCD Transition Board Panel