Product Description · Product Description ... PC connections via Gigabit Ethernet or USB 2.0 (or RS232 via extension module) FPGA (Altera EP4EC115) on-board to enable future updates

Product Description – EB Hardware

Version: 20.10.2014 Confidential Page 1/12

Product Description

EB Hardware

Overview

EB hardware can be used with different EB software tools (e.g. EB tresos Busmirror). Software compatibility can be found in the corresponding software product description. EB offers a variety of different hardware platforms for different use cases.

EB hardware quick overview:

EB HW Intended use

CPU Temp. range

Interfaces

CAN FlexRay Lin Digital in/out

EB 6100 In-car 400MHz -30…70 2 HS / 1 LS 1 (2 ch.) 1 16 I/O

EB 2100 Desktop 400MHz 0…50 4 HS / 1 LS 1 (2 ch.) 2 4/4

EB 5100 Slot-card 400MHz -30…701 Ext: max 4 Ext :1 (2 ch.) Ext: max 2 Ext

EB 6200 In-car 2x1GHz -40…60 Ext: max 6 Ext :1 (2 ch.) Ext: max 4 Ext

EB 2200 Desktop 2x1GHz -40…60 Ext: max 6 Ext: 1 (2 ch.) Ext: max 4 Ext

EB 5200 Slot-card 2x1GHz -40…701 Ext: max 4 Ext: 1 (2 ch.) Ext: max 4 Ext

EB 5200 + EB 0206 + EB 0205

Slot-card 2x1GHz -40…701 Ext: max 6 Ext: 1 (2 ch) Ext: max 4 Ext

EB HW Inter-faces

Power supply

Power consump-tion (max)

FPGA

Ext. slots

GPS Ethernet USB USB Host

RS232

EB 6100 0 - 1 × 100Mbit 1 - 1 6,5…30 V 5W Y (large)

EB 2100 0 - 1 × 100Mbit 1 - - 6,5…30 V 5W Y (large)

EB 5100 5 - - 1 - 1 (int.) - 5W Y (large)

EB 6200 9 Ext: max 1 2 × 1Gbit 1 1 - 6,5…30 V 15W Y (v.large)

EB 2200 9 Ext: max 1 2 × 1Gbit 1 1 Ext: 1 6,5…30 V 15W Y (v.large)

EB 5200 4 Ext: max 1 - - - 1 (int.) - 10W Y (v.large)

EB 5200 + EB 0206 + EB 0205

8 Ext: max 1 1 x 1Gbit - - 1 (int.) - 12W Y (v.large)

All devices operate within a humidity range of 5 to 95 percent in a non-condensing environment.

1 Please note that these are the temperature conditions within the housing surrounding the card. The temperature range outside the

housing will be somewhat narrower, because of the temperature rise within the housing.



EB x2xx hardware series:

Extendable interface hardware

User can select which extension slots are plugged into the hardware to scale up the functionality

Dual-Core µC with 2 × 1GHz

2 × FlexRay controllers in FPGA

6 × CAN controllers in FPGA

4 × LIN controllers in FPGA

EB 6200 (in-car use) EB 2200 (desktop use) EB 5200 (modular slot card)

Modular system with 9 extension slots. Modules available for:

FlexRay (max. 2 ch)

CAN high (max. 6)

LIN (max. 4)

Digital I/O

GPS


FlexRay (max. 2 ch)

CAN high (max. 6)

LIN (max. 4)

Digital I/O

GPS


FlexRay (max. 2 ch)

CAN high (max. 6)

LIN (max. 4)

Digital I/O

GPS

Automotive robust housing with ODU connectors,

Temp. Range: -40 °C to +60 °C

Robust housing with DSUB9 connectors

Temp. Range: -40 to +60 °C

XMC standard board with adaptor boards for PCIe, cPCI, …

Temp. Range: -40 to +70 °C

EB 2200 detailed hardware specifications:

High-performance Dual-Core µC with 2 × 1GHz

PC connections via Gigabit Ethernet or USB 2.0 (or RS232 via extension module)

FPGA (Altera EP4EC115) on-board to enable future updates

Supply voltage: 6,5 V to 30 V

Robust housing • Measurements 215 × 140 × 50 mm • Temperature range: -40° C to +60° C • Relative humidity range (non-condensing): 5% to 95%

DSUB9 connectors on extension modules

2 × Gb Ethernet 10/100/1000BASE-T (Host-PC link and automotive bus)



2 × USB 2.0 (1 × Host-PC link and 1 × USB host for connection with USB devices)

Power consumption: max. 15W

Delivery content:

EB 2200 hardware

Power supply

USB cable

Factory option:

Automotive grade power regulator according to VW80101



PC connections via Gigabit Ethernet or USB 2.0 (or RS232 via extension module)



Robust automotive housing • Measurements 215 × 140 × 50 mm • Temperature range: -40° C to +60° C • Relative humidity range (non-condensing): 5% to 95%

Reliable high-quality push-pull connectors

2 × GB Ethernet 10/100/1000BASE-T (Host-PC link and automotive bus)

2 × USB 2.0 (1 × Host-PC link and 1 × USB host for connection with USB devices)

Power consumption: max. 15W

Delivery content:

EB 6200 hardware

Ethernet PC connection cable

Power supply

Factory option:

Automotive grade power regulator according to VW80101



XMC-PCIe (ANSI/VITA 42.3) standard based board


Temperature range: -40° C to +70° C

Delivery content:

EB 5200 hardware



EB x200 extensions modules

EB 2200 extension module EB 6200 extension module EB 5200 extension module

Extension Module Interface

EB 2200 AddOn EB 0261: Extension_Module_CAN_High_Speed

CAN high-speed extension module AddOn for EB 2200 Hardware - TJA1041 based high-speed CAN module - Standard DSUB9 connector - Software controllable termination resistors Delivery Content: - 1 extension module

EB 2200 AddOn EB 0284: Extension_Module_Digital_Input/Output

Digital I/O extension module AddOn for EB 2200 Hardware - I/O interface module (2 × in, 2 × out) - Standard DSUB9 connector - 2 × in (3…24) V (galvanically isolated) - 2 × out (3,3 V, 50 mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module

EB 2200 AddOn EB 0264: Extension_Module_8x_DIO

Digital I/O extension module AddOn for EB 2200 Hardware - I/O interface module (8 × user configurable in or out) - Standard DSUB9 connector - 3,3V LVTTL - max. 4mA for each output - not galvanically isolated Delivery Content: - 1 extension module

EB 2200 AddOn EB 0260: Extension_Module_FlexRay

FlexRay single channel extension module AddOn for EB 2200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Standard DSUB9 connector - Software controllable termination resistors Delivery Content: - 1 extension module

EB 2200 AddOn EB 0262: Extension_Module_LIN

LIN extension module AddOn for EB 2200 Hardware



- TJA1020/TJA1021 based LIN module - Standard DSUB9 connector - Software configurable to master/slave operation Delivery Content: - 1 extension module

EB 2200 AddOn EB 0215: Extension_Module_RS232

RS232 extension module AddOn for EB 2200 Hardware - Standard DSUB9 connector - No hardware flow-control Delivery Content: - 1 extension module

EB 2200/6200 AddOn EB 0230: Extension_Module_GPS_Receiver

GPS extension module AddOn for EB 2200 and EB 6200 Hardware - Extension module with GPS receiver (MN8010) - SMA antenna connector - Antenna not included - EB 6200 Version not ruggedized - NMEA-0183 compatible - Provides 1PPS pulse Delivery Content: - 1 × GPS receiver extension module without antenna


CAN high-speed extension module AddOn for EB 5200 Hardware - TJA1041 based high-speed CAN module - Software controllable termination resistors - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.


I/O extension module AddOn for EB 5200 Hardware - I/O interface module - Push-pull 7-pin ODU connector - 2 × in (3 .... 24) V (galvanically isolated) - 2 × out (3,3 V, 50 mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module - Please order connector and cabling separately.


FlexRay single channel extension module AddOn for EB 5200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Software controllable termination resistor - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.


LIN extension module AddOn for EB 5200 Hardware



- TJA1020/TJA1021 based LIN module - Software configurable to master/slave operation - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.


CAN extension module AddOn for EB 6200 Hardware - TJA1041 based high-speed CAN module - Software controllable termination resistors - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.


I/O extension module AddOn for EB 6200 Hardware - I/O interface module - Push-pull 7-pin ODU connector - 2 × in (3 .... 24) V (galvanically isolated) - 2 × out (3,3 V, 50mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module - Please order connector and cabling separately.


FlexRay single channel extension module AddOn for EB 6200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Software controllable termination resistors - Push-pull 5-pin ODU connector Delivery Content: - 1 × extension module - Please order connector and cabling separately.


LIN extension module AddOn for EB 5200 Hardware - TJA1020/TJA1021 based LIN module - Software configurable to master/slave operation - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.



EB 2200 AddOn EB 0207:Extension module EtherCAT

May be ordered as factory-option for EB 2200

Provides EtherCAT slave-device IN- and OUT- connectors

Provides separate RS-232 connector

Occupies 3 extension slots on the front-side of the EB 2200

Comes with EtherCAT specific front-panel

EB 5200 PCIe carrier board

EB 0206x Carrier Board EB 0205 Carrier Extension Board

The EB 0206x is a PCIe x1 carrier board for the EB 5200 The EB 0206x provides an JTAG/COP connector for debugging purposes The EB 0205 may be connected to the EB 0206x via two FFC-cables The EB 0205 does not necessarily need an own PCIe slot The EB 0205 provides four additional extension slots



The EB 0205 provides an Ethernet connector The EB 0206s is a standard PCIe x1 carrier without the JTAG and FFC connectors



EB x1xx hardware series:

Fixed amount of hardware interfaces

Powerful 400 MHz µC

2 × FlexRay controllers in FPGA

EB 6100 (in-car use) EB 2100 (desktop use) EB 5100 (modular slot card)

2 × FlexRay

2 × CAN

1 × LIN

2 × FlexRay

4 × CAN

2 × LIN

5 × physical layer module slots for FlexRay, CAN and LIN

Automotive robust housing with ODU connectors

Temp. Range -30°C to +70°C

Desktop housing with DSUB9 connectors

Temp. Range 0°C to +50°C

PMC standard board with adaptor boards for PCI, PXI, cPCI, PCIe

Temp. Range -30°C to +70°C


High-performance Freescale Microcontroller MPC5200B with 400MHz

2 × 10 Mbit/s FlexRay (TJA1080 or RS485)

2 × high-speed CAN (ISO 11898-2)

1 × fault-tolerant CAN (ISO 1189-3)

1 × LIN

4 × analog input channels: 10 kHz sample rate, 12 Bit resolution, 0 to 20 V

16 × configurable digital input or output channels

PC connections via Ethernet, USB 2.0 or RS232

Altera FPGA Cyclone EP2C70 with 256KB SRAM


Robust automotive housing • Measurements 150 × 100 × 25 mm • Protection category IP65 • Guaranteed ambient temperature range: -30° C to +70° C

Reliable high-quality ODU connectors

Low power consumption (~5 W)

Delivery content:

EB 6100 hardware



USB and Ethernet PC connection cable

Power supply


High-performance 400 MHz Freescale microcontroller MPC5200B

2 × 10 Mbit/s FlexRay (TJA1080)

3 × high-speed CAN (ISO 11898-2)

1 × high-speed or fault-tolerant CAN (ISO 11898-2/ISO 11898-3)

2 × LIN (TJA1020)

4 × analog input channels: 20 V

Optional: 2 × analog output channels, 10 V, 10 mA, 1 ms full-scale,

4 × digital input channels, 0 to 5 V

Optional: 0 to 12 V, overvoltage protection, galvanic insulation

4 × digital output channels, 0 to 5 V

Optional: 0 to 10 V, overvoltage protection, galvanic insulation

PC connection via USB 2.0 or Ethernet

Altera FPGA Cyclone EP2C70 with 256 kB SRAM

Supply voltage: 8 to 30 V

Light weight housing

Measurements: 180 × 110 × 40 mm

Environmental temperature range: 0°C to +50 °C

Low power consumption (~5 W)

Standardized D-sub-9 connectors

Delivery content:

EB 2100 hardware

USB PC connection cable


High performance Freescale MPC5200B Microcontroller with

400Mhz 32MB SDRAM / 8MB Flash

PMC standard based board designed to be mounted on PCI,

CompactPCI, PXI, and other carrier boards

5 slots for physical layer modules

Physical layer modules available for • FlexRay (NXP TJA1080) • CAN high-speed (TI SN65HVD234) • CAN low-speed (AMIS 41683) • LIN (NXP TJA1020) • 6 × digital configurable input or output channels with ESD protection

- maximum output current/channel: 24 mA - output voltage: 3 V - input voltage: max. 5 V (TTL)

2 × FlexRay E-Ray Controllers in FPGA

Reliable high-quality ODU connectors

USB 2.0 and RS232 PC interface

Delivery content:

EB 5100 hardware



EB 5100 extension modules

Physical Layer Module Description

EB 5100 add-on: PhysicalLayerModule_FlexRay

Single channel FlexRay Physical Layer Module. - Mounted FlexRay V2.1 transceiver: NXP TJA1080A - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled

EB 5100 add-on: PhysicalLayerModule_CAN_High_Speed

CAN high-speed Physical Layer Module. - Mounted CAN transceiver: TI SN65HVD234. - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled

EB 5100 add-on: PhysicalLayerModule_CAN_Fault_Tolerant

- CAN fault-tolerant Physical Layer Module. - Mounted CAN transceiver: AMIS41683. - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled

EB 5100 add-on: PhysicalLayerModule_6x_DIO

- Physical Layer Module with 6 digital configurable input or output lines with ESDprotection. - Maximum output current/channel: 24mA - Output voltage: 3V - Input voltage: max. 5V (TTL) - Push-pull 7-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled

EB 5100 add-on: PhysicalLayerModule_LIN

LIN 2.1 compliant Physical Layer Module. - Mounted LIN transceiver: NXP TJA1020 - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled

EB 5100 add-on: PhysicalLayerModule_FlexRay_GalISO

Galvanically isolated FlexRay Physical Layer Module - Mounted transceiver: NXP TJA1080A transceiver - Galvanic isolation with three SHARP



PC4D10SNIP0F optocoupler - Isolation voltage 1kV - The galvanically isolated FlexRay module occupies 2 extension slots on the EB 5100 board - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled

Product Description · Product Description ... PC connections via Gigabit Ethernet or USB 2.0 (or RS232 via extension module) FPGA (Altera EP4EC115) on-board to enable future updates

Documents