Product Description – EB Hardware Version: 29.03.2017 Confidential Page 1/16 Product Description EB Hardware Overview EB hardware can be used with different EB software tools (e.g. EB tresos Busmirror). Software compatibility can be found in the corresponding software product description. EB offers a variety of different hardware platforms for different use cases. EB hardware quick overview: EB HW Intended use CPU Temp. range Interfaces CAN FlexRay Lin Digital in/out EB 6100 In-car 400MHz -30…70 2 HS / 1 LS 1 (2 ch.) 1 16 I/O EB 2100 Desktop 400MHz 0…50 4 HS / 1 LS 1 (2 ch.) 2 4/4 EB 5100 Slot-card 400MHz -30…70 1 Ext: max 4 Ext :1 (2 ch.) Ext: max 2 Ext EB 6200 In-car 2x1GHz -40…60 Ext: max 6 Ext :1 (2 ch.) Ext: max 4 Ext EB 2200 Desktop 2x1GHz -40…60 Ext: max 6 Ext: 1 (2 ch.) Ext: max 4 Ext EB 5200 Slot-card 2x1GHz -40…70 1 Ext: max 4 Ext: 1 (2 ch.) Ext: max 4 Ext EB 5200 + EB 0206 + EB 0205 Slot-card 2x1GHz -40…70 1 Ext: max 6 Ext: 1 (2 ch) Ext: max 4 Ext EB HW Inter- faces Power- supply Power consump -tion (max) FPGA Ext. slots GPS Ethernet USB USB Host RS232 EB 6100 0 - 1 × 100Mbit 1 - 1 6,5…30 V 5W Y (large) EB 2100 0 - 1 × 100Mbit 1 - - 6,5…30 V 5W Y (large) EB 5100 5 - - 1 - 1 (int.) - 5W Y (large) EB 6200 9 Ext: max 1 2 × 1Gbit 1 1 - 6,5…30 V 15W Y (v.large) EB 2200 9 Ext: max 1 2 × 1Gbit 1 1 Ext: 1 6,5…30 V 15W Y (v.large) EB 5200 4 Ext: max 1 - - - 1 (int.) - 10W Y (v.large) EB 5200 + EB 0206+ EB 0205 8 Ext: max 1 1 x 1Gbit - - 1 (int.) - 12W Y (v.large) All devices operate within a humidity range of 5 to 95 percent in a non-condensing environment. 1 Please note that these are the temperature conditions within the housing surrounding the card. The temperature range outside the housing will be somewhat narrower, because of the temperature rise within the housing.
16
Embed
Product Description · PDF fileProduct Description – EB Hardware ... housing with ODU connectors, Temp. ... DSUB9 connectors Temp. Range: -40 to +60 °C XMC standard board with
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Product Description – EB Hardware
Version: 29.03.2017 Confidential Page 1/16
Product Description
EB Hardware
Overview
EB hardware can be used with different EB software tools (e.g. EB tresos Busmirror). Software compatibility can be found in the corresponding software product description. EB offers a variety of different hardware platforms for different use cases.
Digital I/O extension module AddOn for EB 2200 Hardware - I/O interface module (2 × in, 2 × out) - Standard DSUB9 connector - 2 × in (3…24) V (galvanically isolated) - 2 × out (3,3 V, 50 mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module
EB 2200 AddOn EB 0264: Extension_Module_8x_DIO
Digital I/O extension module AddOn for EB 2200 Hardware - I/O interface module (8 × user configurable in or out) - Standard DSUB9 connector - 3,3V LVTTL - max. 4mA for each output - not galvanically isolated Delivery Content: - 1 extension module
EB 2200 AddOn EB 02603: Extension_Module_FlexRay
FlexRay single channel extension module AddOn for EB 2200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Standard DSUB9 connector - Software controllable termination resistors Delivery Content: - 1 extension module
EB 2200 AddOn EB 02623: Extension_Module_LIN
LIN extension module AddOn for EB 2200 Hardware - TJA1020/TJA1021 based LIN module - Standard DSUB9 connector - Software configurable to master/slave operation Delivery Content: - 1 extension module
CAN low-speed extension module AddOn for EB 2200 Hardware - AMIS41683 based low-speed CAN module - Standard DSUB9 connector Delivery Content: - 1 extension module
EB 2200 AddOn EB 02634: Extension_Module_CAN_FD
CAN FD extension module AddOn for EB 2200 Hardware - MCP2562FD based CAN FD module - Standard DSUB9 connector - Software controllable termination resistors Delivery Content: - 1 extension module
EB 2200 AddOn EB 0215: Extension_Module_RS232
RS232 extension module AddOn for EB 2200 Hardware - Standard DSUB9 connector - No hardware flow-control Delivery Content: - 1 extension module
The EB 0206s11 as standard PCIe x 1 carrier for the EB 5200: • without additional connectors
The EB 0206x11 as extended PCIe x 1 carrier for the EB 5200: • with JTAG/COP connector for debugging
The EB 0205 as 1000BASE-TX Ethernet extension-board: • may be connected to the EB 0206x (over two FFC-cables) • no additional PCIe-slot required • with RJ45-Ethernet connector • provides four expansion slots for additional modules
11
Known issue with EB0200 RevB: Hardware-Modification on EB0200 is required to enable compatibility with this carrier-board
The EB 0204x12 as PCIe x 4 adapter for the EB 5200: • with JTAG/COP connector for debugging
The EB 0203 as BroadR-Reach extension-board: • may be connected to the EB 0204x (over two FFC-cables) • no additional PCIe-slot required • with two BroadR-Reach connectors13 • provides four expansion slots for additional modules
12
Known issue with EB0200 RevB: Hardware-Modification on EB0200 is required to enable compatibility with this carrier-board
13 Known issues: Transmission-LEDs are interchanged with each other,
BroadR-Reach connectors are placed too deep inside the device
1 × high-speed or fault-tolerant CAN (ISO 11898-2/ISO 11898-3)
2 × LIN (TJA1020)
4 × analog input channels: 20 V
Optional: 2 × analog output channels, 10 V, 10 mA, 1 ms full-scale,
4 × digital input channels, 0 to 5 V
Optional: 0 to 12 V, overvoltage protection, galvanic insulation
4 × digital output channels, 0 to 5 V
Optional: 0 to 10 V, overvoltage protection, galvanic insulation
PC connection via USB 2.0 or Ethernet
Altera FPGA Cyclone EP2C70 with 256 kB SRAM
Supply voltage: 8 to 30 V
Light weight housing
Measurements: 180 × 110 × 40 mm
Environmental temperature range: 0°C to +50 °C
Low power consumption (~5 W)
Standardized D-sub-9 connectors
Delivery content:
EB 2100 hardware
USB PC connection cable
EB 5100 detailed hardware specifications:
High performance Freescale MPC5200B Microcontroller with
400Mhz 32MB SDRAM / 8MB Flash
PMC standard based board designed to be mounted on PCI,
CompactPCI, PXI, and other carrier boards
5 slots for physical layer modules
Physical layer modules available for • FlexRay (NXP TJA1080) • CAN high-speed (TI SN65HVD234) • CAN low-speed (AMIS 41683) • LIN (NXP TJA1020) • 6 × digital configurable input or output channels with ESD protection
- maximum output current/channel: 24 mA - output voltage: 3 V - input voltage: max. 5 V (TTL)