PRODUCT DATASHEET Mirella series last update 3/10/2012 Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status C12476_MIRELLA-50-S Mirella Reflector CLL010 Metal 49.9 mm 24 mm Round PC - Glue Ready FWHM Efficiency cd/lm Gerber File 14 degrees (simulated) 0 % - Available Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status CN12483_MIRELLA-50-S-DL Mirella Pack CLL010 Metal 49.9 mm 23.9 mm Round PC - Glue Ready FWHM Efficiency cd/lm Gerber File 20 degrees (simulated) 0 % - Available Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status C12477_MIRELLA-50-M Mirella Reflector CLL010 Metal 49.9 mm 23.9 mm Round PC - Glue Ready FWHM Efficiency cd/lm Gerber File 29 degrees (simulated) 0 % 3.200 Available Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status CN12484_MIRELLA-50-M-DL Mirella Pack CLL010 Metal 49.9 mm 23.9 mm Round PC - Glue Ready FWHM Efficiency cd/lm Gerber File 39 degrees (simulated) 0 % - Available May 8th 2013 15:49 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected]FAX: +358-2-733 8001
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
MirellaPackCLL010Metal49.9 mm23.9 mmRound PC - Glue Ready
FWHMEfficiencycd/lmGerber File
50 degrees (simulated) 0 % - Available
NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.
May 8th 2013 15:49 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
- Product series especially designed & optimized for CLL010 series of LEDs. - Special care taken to make light distribution as uniform as possible.- Lens material optical grade PC with high UV and temperature resistance (120 degrees of Celcius / 248degrees of Fahrenheit). Allows use of high current and temperature conditions.
Please find more information about used materials from below:http://ledil.fi/sites/default/files/Documents/Technical/Material/PC%20Makrolon%202400_2407_2456_2458-UL.pdf- Reflector is made of aluminium coated PC (120 degrees of Celcius / 248 degrees of Fahrenheit) withprotective lacquer (110 degrees of Celcius / 230 degrees of Fahrenheit).
- Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glueoptions.http://www.ledil.com/datasheets/DataSheet_GLUES.pdf
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the endproduct. For example, mechanical stress, vibration and holes on the surface of the circuit boarweaken the strength of the glue.
NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. Ifcleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LEDmanufacturer -this is important as cleaning shall under no circumstances damage LEDs or otherelectronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fibercloth may be used to remove fingerprints or other traces from handling.
May 8th 2013 15:49 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3