The right to make technical changes is reserved Athmer oHG | Last updated 18.09.2019 Product catalogue 1.2 Athmer - Securely sealed. Athmer - securely sealed.
The right to make technical changes is reserved Athmer oHG | Last updated 18.09.2019
Product catalogue 1.2Athmer - Securely sealed.
Athmer - securely sealed.
ATHMER NADI
v
Athmer has been involved in the production of automatic door seals for more than 60 years. The success
of the company is a combination of expertise and quality and enables the continuous development and
improvement of its product range. Offering the widest range on the market, Athmer has the right product
for practically every type of application. In addition to automatic door seals for acoustic, smoke and fire
protection doors, the range also offers seals for radiation protection doors and for doors with extremely
large gaps of up to 50 mm at the bottom. Within the industry, the Athmer trademarks Kältefeind® and
Schall-Ex® have become synonymous with automatic door seals.
Athmer’s automatic door seals support the principles of sustainable and energy-efficient building.
Using a seal reduces CO2 emissions and make therefore a real contribution to the eco-balance. It also
complies with the recommendations regarding barrier-free building and ensures that people who are el-
derly or physically challenged people have comfortable and safe access to buildings and rooms. Athmers
latest expansion of its product range contains smoke & fire and fire only intumescent seals as well as
acoustic, smoke and fire perimeter seals, which allows to offer the customers every possible way to
seal their doors.
Athmer Finger Protection has been preventing fingers from becoming trapped between doors and
frames for more than 30 years. Athmer offers a wide variety of possible solutions to ensure that automatic
doors and doors in kindergartens can be used safely.
Athmer finger protection systems are also suitable for use with fire doors and smoke protection doors.
athmer.com
ATHMER The latest technology atthe highestlevel
2
v
We focus on sustainability
Calculate the ecological return for your buildingwith the CO2 climate calculator from Athmer.
Environmental Product Declaration (EPD, LEED, BEAM) available for automatic door seals
Endurance test passed with flying colours
Athmer Technical Centre – The latest technology for concentrated development expertise
¬ Enter the parameters for your building and room;
for example, location, energy source, and sealing height of the doors
¬ Optain the results and the energy-efficiency of Athmer door seals
Athmer supports sustainable construction and the
ecological evaluation of buildings
¬ Internationally recognised and verifiable eco-balance
¬ Security of investment for building developers
¬ Compliance with the European standard EN 14025
Athmer sets new standards: 1,000,000 test cycles!
¬ Verified durability that far surpasses the standard of the
“Ü” sign of compliance
¬ A long-term, safe investment
¬ Resource conservation ensures sustainability
¬ CERTIFIRE provides assurance that fire protection products and systems correctly
installed will perform as required. Therefore avoiding costly mistakes and dramati-
cally reducing risk.
Athmer Technical Centre – The latest technology for concentrated
development expertise
Athmer supports its customers in the different stages of product development
¬ "Concurrent Engineering”: from the idea to the market-ready product
¬ state-of-the-art acoustic, air / wind / water and hot smoke testing facilities
No CF 5675
3
4
300 years - the history of Cronenberg Group JCS
In 2011 the company Cronenberg celebrated it’s 300th anni-versary. It started in the year of 1711 in Ennepetal. As the 5th generation entered they moved the company to Koerbecke. In 1870, Carl Julius Cronenberg purchased the Sophienham-mer forge, which he reconstructed. He took over the Sophien-hammer forge, located in the Roehr valley near Muxeschede, from the Neu-Oeger smelting works in Hohenlimburg. The forge was originally been founded by Hermann Diedrich Piepenstock from Iserlohn, and named after his wife, Sophie. Carl Julius adapted the factory in line with his own manufac-turing requirements. In the spring of 1871, he put the scythe smithy into operations. In 1991 and 1998 Carl-Julius and Wilm-Hendric Cronenberg entered the company as the tenth generation and continued the group’s strategic development. “Once again, our roots remain an important element of our corporate culture. We have therefore not changed the histor-
ical part with its stories of factories and families, human and machines, traditions and innovations."After over 300 years, both tradition and innovation are equally important in terms of defining the corporate culture of the Julius Cronenberg Sophienhammer group of companies. For more than 60 years Athmer is part of JCS and Europe`s lead-ing manufacturer of automatic door seals.
The success story began in the year 1950, when the automatic door bottom Kältefeind® was registered as a brand. Ever since Athmer`s self-image has widened as its fields of expertise have constantly expanded. Today, the company views itself as a pioneer of special sealing solutions in a wide range of "competence all around the door". With several investments around the word -subsidiary companies for example in the UK and Asia - Athmer is expanding and offering solutions for every market.
6
Development & Innovation
ATHMER TECHNICAL CENTRE Development & Innovation
New Technologies. New Requirements. New Standards. The world of doors is constantly changing – and we are ac-tively involved in adapting this change. The technicians and engineers in our development team use the latest technologies – always with the aim of further improving the quality of our door seals and finger protection systems. More than 150 patents and registered designs worldwide clearly demonstrate our innovative capability. To further strengthen this, we asso-
ciate with renowned test institutes. Our engineers are also engaged in various committees of the DIN standards. In this way, we are ac-tively involved in establishing new standards in the world of doors. We are also a reliable partner for our customers for more than 60 years. For us, contracts and agreements with customers are always honored. We are committed to quality: Your doors de-serve the best seals, and our customers deserve the best service.
In our Technical Centre, we test the sound insulation capacity of doors and windows and the resitance to air, driv-ing rain and wind loads.
We support and advise you in the var-ious stages of the product develop-ment – always with the aim of getting the product onto the market quickly, efficiently and with the highest quality standards.
7
In our acoustic testing facility, we can raise the sound insulation values for joints and construction elements such as doors and windows. The laboratory meets the requirements of EN ISO 10140 and comprises three rooms in L shape.
The acoustic signals from the two outer rooms are sent to the centrally located receiving room. The rooms are sepa-rated from each other by a modular partition wall system, in one case, and by a concrete wall, in the other case.
Both walls have a test opening which can be quickly and flexibly adjusted to suit the element to be tested. This al-lows us to test components of all sizes. The acoustic testing laboratory is monitored by ift Rosenheim, who also helped us to design the laboratory. The staff of this renowned institute deter-mine the sound insulation values of your test object and carry out the final sound insulation test. We will be happy to provide your prod-ucts with respect to sound insulation.
Acoustic testing facility
9
Air / wind / water and hot smoke testing facility
In our twelve square metre test facility we test how airtight and watertight doors, windows, shutters or façades are to draughts, driving rain or high winds. A flexible grid system allows us to create a tailor-made frame for the product.We then measure the reaction of the test object to short blasts of air, to a constant air pressure or vacuum, and
to persistent rain applied via several nozzles. With a fog machine, we are also able to test for leaks. Our air / wind / water testing facility complies with the requirements of standards DIN EN 1026 and DIN EN 1027. It is calibrated annually by an independent labora-tory.
We also have a hot smoke (200°C) test-
ing facility available. Before the prod-ucts are tested, its persistence will be tested in a long-term durability test. Further we are able to test the burglary protection of the products. A notch test can also be realised. Naturally, we also advise you on how you can further improve the air and water tightness of your products.
10
Possible fixing variations
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Masstab
Datum Name
E.-Nr.
Bezeichnung
NameDatumÄnderungIndex
¬ Installation: in the groove
¬ Actuator: hinge side
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Masstab
Datum Name
E.-Nr.
Bezeichnung
NameDatumÄnderungIndex
¬ Installation: in the groove
¬ Actuator: hinge side and lock side
¬ Installation: in the groove
¬ Actuator: hinge side and lock side
¬ Installation: in the groove
¬ Actuator: hinge side
¬ Installation: in the groove
¬ Actuator: lock side
¬ Installation: in the groove
¬ Actuator: lock side
¬ Installation: screw-fixed to the closing surface
¬ Actuator: hinge side
¬ Installation: screw-fixed to the closing surface
¬ Actuator: hinge side with angle pressure bracket
¬ Installation: in the groove
¬ Actuator: hinge side
¬ Installation: screw-fixed to the opening surface
¬ Actuator: lock side with pressure block
¬ Installation: screw-fixed to the closing surface
¬ Actuator: lock side
¬ Installation: in the groove
¬ Actuator: cable actuator
Schall-Ex Slide L-20 WS ZA
11
Symbols
¬ Actuator: hinge side
¬ Barrier-free access
¬ Actuator: lock side
¬ Actuator: lock side
¬ Acoustic protection
¬ Installation: on the opening surface
¬ Actuator: hinge side and lock side
¬ Smoke control
¬ Installation: on the opening surface
¬ Actuator: hinge side
¬ Installation: under the door leaf
¬ Actuator: lock side
¬ Fire protection
¬ Installation: under the door leaf
¬ Actuator: hinge side and lock side
¬ Low actuation forces
¬ Installation: under the door leaf
¬ Actuator: hinge side
¬ Downpour-proof/ w-proof
¬ Radiation protection
¬ Thermal insulation
¬ Draught
¬ Moisture proof
¬ Installation: on the opening surface
¬ Actuator: lock side
¬ Installation: in the groove / under the door leaf
¬ Actuator: hinge side and lock side
¬ Installation: in the groove / under the door leaf
¬ Actuator: hinge side ¬ Secondary closing edge / opening face
¬ Secondary closing edge / adjacent closing face
¬ “Ü” sign of compliance
¬ UL
¬ Certifire
No CF 5675
12
Content
Article Art.No. Groove width Travel Page
Drop seals 24
for timber doors 24
Doppeldicht® M-12/35 1-393 12 mm 11 mm 26
M-12/20 RS 1-723 12 mm 12 mm 27
M-12/30 RS 1-723 12 mm 15 mm 27
Schall-Ex® Slide & Lock M-12 WS 1-549 12 mm 11 mm 28
VHH M-12 Set 1-839 29
Schall-Ex® Slide M-12 WS 1-548 12 mm 11 mm 28
Schall-Ex® L-14/35 EK 1-935 14 mm 20 mm 30
Schall-Ex® L-15/30 WS 1-880 15 mm 20 mm 32
Schall-Ex® L-15/30 OS 1-881 15 mm 20 mm 35
Schall-Ex® Duo L-15 WS 1-382 15 mm 14 mm 37
M-15/30 OS 1-178 15 mm 11 mm 40
M-15/30 WS 1-184 15 mm 11 mm 41
M-15/38 OS 1-169 15 mm 20 mm 42
M-15/38 WS 1-172 15 mm 20 mm 43
Slide M-15/38 WS 1-177 15 mm 20 mm 44
Barrier Seal M-15/28 OS 1-102 15 mm adjustable 45
13
Product overview drop seals for timber doors35
13,8
22
60
1619
15
Page 30
1-935A B
C D
M1 D
14,8
30
271
30
14,827
1
11 m
m11
mm
Page 40
1-178
14,83
0
14,8
30
Page 32
1-880
14,8
27,8
29
1
Page 35
1-881
30
14,8
30
14,8
Page 37
1-382
35
12
3512
Page 26
1-393
A B
C D
M5 C
12 m
m
11,8
20
Page 27
1-723
A B
C D
M6 C15
mm
11,8
30
Page 27
1-725
35
12
Page 28
1-549
35
12
35
12
Page 28
1-548
A B
C D
14,8
3838
16
M2 B
20 m
m20
mm
14,8
Page 43
1-172A B
C D
M1 B
14,8
30
14,8
30
11 m
m11
mm
Page 41
1-184A B
C D
14,8
3838
16
M2 B
20 m
m20
mm
14,8
Page 44
1-177A B
C D
M2 D
20 m
m20
mm
14,8
30
341
14,8
30
341
Page 42
1-169 A B
C D
Athmer M4 D
M4 D
30
14,8
127
Page 45
1-102
14
Content
Article Art.No. Groove width Travel Page
Drop seals 24
for timber doors 24
Barrier Seal M-15/30 WS 1-103 15 mm adjustable 45
Schall-Ex® Ultra WS 1-290 20 mm 12 mm 48
Schall-Ex® Ultra OS 1-292 20 mm 12 mm 48
Schall-Ex® Slide & Lock M-20 WS 1-550 20 mm 12 mm 51
Schall-Ex® Slide M-20 WS 1-556 20 mm 12 mm 52
Schall-Ex® Slide M-20 WS ZA 1-846 20 mm 12 mm 52
Schall-Ex® Radiation protection WS 1-528 20 mm 12 mm 53
Schall-Ex® Radiation protection WS BD 1-522 20 mm 12 mm 53
Schall-Ex® S&L Radiation protection WS 1-551 20 mm 12 mm 54
Schall-Ex® Slide Radiation protection WS 1-557 20 mm 12 mm 54
Schall-Ex® Jumbo 1-154 20 mm 35 mm 55
Athmer Rainstop® M-24/20 WS 1-932 24 mm 13 mm 57
Drop seals for glass doors 58
Schall-Ex® GS-A 1-814 11 mm 61
Schall-Ex® Slide GS-A 1-875 11 mm 62
Schall-Ex GS-H8/12 1-817 12 mm 63
Schall-Ex® Slide GS-H8 1-578 11 mm 64
Schall-Ex® Slide GS-H10 1-572 11 mm 64
Schall-Ex® Duo GS-H20 1-440 12 mm 65
Schall-Ex® GS-H20 1-439 12 mm 65
15
Product overview drop seals for timber and glass doors
A B
C D
Athmer M4 B
14,8
30
M4 BPage 45
1-103
30
19,7 24
19,7 24
30
Page 52
1-846
19,5
50
19,5
50
Page 55
1-154
12,6
8
1532
Page 64
1-578
19,7
35
30
19,7
30
Page 48
1-290
19,7
30
19,7
30
Page 53
1-528
24
20
24
20
Page 57
1-932
10
1532
12,6
Page 64
1-572
19,7
1,3
28
,7
34,7
Page 48
1-292
19,7
30
19,7
30
Page 53
1-522
15,4
45
Page 61
1-814
20
3335
25,5
Page 65
1-440
19,7
30
Page 51
1-550
19,7
30
Page 54
1-551
A B
C D
/athmer/1-875--q
45
15,4
Page 62
1-875
20
3335
25,5
Page 65
1-439
19,7
30
19,7
30
Page 52
1-556
19,7
30
19,7
30
Page 54
1-557
8 - 12
15,4
2715
Page 63
1-817
16
Content
Article Art.No. Groove width Travel Page
Brush seals for glass doors 66
Glasdicht SK 4-158 67
Drop seals for metal/system doors 68
Athmer Rainstop® M-24/20 WS 1-932 24 mm 13 mm 71
M-24/21 OS 1-244 24 mm 11 mm 72
M-24/20 TS 1-248 40 mm 11 mm 72
M-24/20 WS 1-264 24 mm 11 mm 73
Surface mounted seals 76
NADI® SR 77
NADI® SR-A 77
Schall-Ex® L-15 FS 1-885 20 mm 80
M-12 FS 1-742 15 mm 81
17
Product overview brush seals for glass doors
4512
8,5
Page 67
4-158
24
20
24
20
Page 71
1-932
A B
C D
/athmer/320299-q
10,3
26
Page 77
320299
A B
C D
M3 B
24
2022
12
15
24
20
11 m
m11
mm
Page 73
1-264
1414
,5
25,4
13,6
Page 77
320235
A B
C D
24
34
201
24
34
201
M3 D
11 m
m11
mm
Page 72
1-244
17,2
54
Page 80
1-885
A B
C D
M7
15 m
m
49
13
Page 81
1-742
A B
C D
20
24
4020
24
40
M3 C
11 m
m11
mm
Page 72
1-248
Product overview drop seals for metal / system doors
18
Content
Article Art.No. Groove width Travel Page
Surface mounted seals 74
Schall-Ex® Applic A 1-658 5 mm max. 11 83
Schall-Ex® Slide Applic A 1-717 5 mm max. 11 83
Schall-Ex® Jumbo II 1-474 50 mm 84
Schall-Ex® Jumbo III 1-157 35 mm 84
Thresholds 85
Stainless Steel Threshold 164 3-107 85
Stainless Steel Threshold 365 3-135 85
Stainless Steel Threshold 288 3-103 85
Stainless Steel Threshold 513 3-150 85
Aluminium Threshold 090 3-111 85
Aluminium Threshold 253 3-114 85
Aluminium Threshold 088 3-117 85
Aluminium Threshold 277 3-104 85
Aluminium Threshold 308 3-120 85
Aluminium Threshold 278 3-108 85
Aluminium Threshold 217 3-100 85
Aluminium Threshold 496 3-152 85
19
Product overview
Thresholds
5
40
2,540
2
3055
5
Page 85 Page 85 Page 85
3-107 3-135 3-103
Thresholds
2
3055
5
540 4,536
Page 85 Page 85 Page 85
3-150 3-111 3-114
Thresholds
30 3
6
56 2,5
6
30 3
Page 85 Page 85 Page 85
3-117 3-104 3-120
Thresholds
356
2
53055 56 2,
5
10
Page 85 Page 85 Page 85
3-108 3-100 3-152
14,5
46
Page 83
1-658
14,5
46
Page 83
1-717
81
2
22
20
10
5
Page 84
1-474
2
80
52
,5
22
Page 84
1-157
20
Article Art.No. Groove width Travel Page
Brush seals 86
Nirobros 4-436 86
Alubros 4-133 86
Ferrobros 4-336 86
KU III 332 86
Brush seal Super 33007 87
Fire and smoke Intumescent seals 88
FP 1004 160053 90
FP 1504 160056 90
FP 2004 160059 90
FP 3004 160062 90
FP 3804 160065 90
FB 1004 160068 91
FB 1504 160071 91
FB 2004 160074 91
FF 1004 D 160077 92
FF 1504 D 160080 92
FF 2004 D 160083 92
F 2002 160086 93
F 1502 160089 93
F 1002 160092 93
Acoustic perimeter seals Gap Size 94
Schall-Ex® AP 1015 TE 160069 97
Schall-Ex® AP 1018 S 160001 2 - 4 mm 98
Schall-Ex® AP 1018 TE 160005 2 - 4 mm 99
Schall-Ex® AP 1019 TE 160009 4 - 6 mm 100
Schall-Ex® AP 2018 TE 160013 2 - 4 mm 101
Schall-Ex® AP 1020 TS 160017 2 - 4 mm 102
Schall-Ex® AP 1023 TS 160022 4 - 6 mm 103
ZD Universal 370 300 104
ZD-Slide 12/12 210 104
Unitherm Slide 22/22 319050 104
Slide 5 for VHH 284 104
Slide VN - 8/10 523 104
Unitherm FAS-20 319 204 105
Unitherm I 319 200 105
Unitherm II HG 319 000 105
Unitherm XIII 319 080 105
Content
21
Page 86 Page 86 Page 86
FP-series
10
4
Page 90
160053
FB-series
10
4
3
Page 91
FB 1004
/athmer/371300-q
A B
C D
Page 104
370 300
A B
C D
AP 1018 S
124
8
4,5
5 75
12
Page 98
AP 1018 S
A B
C D
Schall-Ex AP 1015 TE
12
4 - 6
7
5
4
12
4.5
66.
5
12Page 97
AP 1015 TE
A B
C D
AP 1023 TS
inactive leaf
active leaf
5 -1
5
138
9
5.6
12.5
7
Page 103
AP 1023 TS
FF-series
20
4
4
Page 92
FF 2004 D
FP-series
15
4
Page 90
160056
FB-series
15
4
3
Page 91
FB 1504
16,5
12,5
12,5
12+1
14 -1
empfohlene Nut:
8±2
Page 104
210
A B
C D
AP 1018 TE
412
75
4,5
58
12
Page 99
AP 1018 TE
A B
C D
/athmer/284----q
7
5,5
Page 104
284
F-series
20
2
Page 93
F 2002
FP-series
20
4Page 90
160074
FB-series
20
4
3
Page 91
FB 2004
A B
C D
/athmer/319050-q
22
2212
Page 104
319050
A B
C D
AP 1019 TE
Band
Eindrehkurve Band
44
12
3,5
5,5
5
4,5
12
59
Page 100
AP 1019 TE
A B
C D
/athmer/523----q
11
3
Page 104
523
F-series
15
2
Page 93
F 1502
17,5
3,521
7
Page 86
332
FP-series
30
4
Page 90
160062
FF-series
10
4
4
Page 92
FF 1004 D
10,3
2613
1414
,5
25,4
13,6
Page 105
319 204
A B
C D
PS 2018 TE
13
9.8
7
4.5
10
9.515
Page 101
AP 2018 TE
/athmer/319000-q
A B
C D
8
1421
Page 105
319 000
F-series
10
2
Page 93
F 1002
7
2415
Page 87
33007
FP-series
38
4
Page 90
160065
FF-series
15
4
4
Page 92
FF 1504 D
/athmer/319200-q
A B
C D
8
10
17
Page 105
319 200
A B
C D
AP 1020 TS
4,5
12
6,2
7,5
412
75
Page 102
AP 1020 TS
/athmer/319080-q
A B
C D
5
15
Page 105
319 080
Product overview
22
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Maßstab
Datum Name
Art.-Nr.
Bezeichnung
NameDatumÄnderungIndex
Door frame rebate width
Door leaf rebate width = width of the drop seal
External dimension of door leaf
13+0,5
15
Door leaf width = width of the drop seal
15
13+0,5
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Maßstab
Datum Name
Art.-Nr.
Bezeichnung
NameDatumÄnderungIndex
Door frame rebate width
Door leaf rebate width = width of the drop seal
External dimension of door leaf
13+0,5
15
Door leaf width = width of the drop seal
15
13+0,5
Content
Seal lengths for doors
Lock sideHinge side
Article Art.No. Page
Acoustic perimeter seals 92
PS 710 P 160037 106
PS 788 S 160040 107
PS 0704 S 160057 108
PS 0402 S 160027 109
PS 0604 S 160030 109
PS 0804 S 160033 109
PS 1010 P 160043 110
PS 1212 P 160046 110
PS 1515 P 160049 110
PS 3645 P 160036 111
PS 3665 P 160058 111
PS 810 TE 160050 112
PS 812 TE 160062 113
Athmer finger protection 114
NR-25 5-101 116
NR-26 w-proof 5-701 117
NA-7 5-501 118
BU-16 5-201 120
BU-20 5-211 120
BU-22 5-221 120
BO-13 5-455 120
BO-22 5-452 120
BA-28 5-274 120
Porti® for timber doors 5312 122
Porti® for glass doors 5318 123
23
1840
25
40
25
6
18
25>
> 25
6
> 25
25
26
40 18
6
26
40
18
6
Page 116 Page 117 Page 118
5-101 5-701 5-501
15
16
R7,5
C
M
Y
CM
MY
CY
CMY
K
5-201-1q.pdf 1 11.08.15 10:41
21
21
R10
C
M
Y
CM
MY
CY
CMY
K
5-211-1q.pdf 1 11.08.15 10:41
23
24
R11
C
M
Y
CM
MY
CY
CMY
K
5-221-1q.pdf 1 11.08.15 10:41
A B
C D
Athmer Fingerschutz BO-13
13Ø
3017
1,5
22Ø
10
31,5
1,5
2,5
4
42,222
30
2036
5034
22
42,2
4
Page 120 Page 120 Page 120 Page 120 Page 120 Page 120
5-201 5-211 5-221 5-455 5-452 5-274
Door opening restrictor
635
A B
C D
Athmer Porti für Glastüren
400
Ø13
17
957
Page 122 Page 123
Porti® for timber doors 5489 Porti® for glass doors 5487
Product overview perimeter seals
Product overview Athmer finger protection
A B
C D
PS 710 P
4
1 - 2
10
10.5
6 1 - 2
4
Page 106
160037
A B
C D
PS 0402 S
O4
7.4
4
25
3 - 3.5
2
3 - 3.5
5
Page 109
160027
A B
C D
PS 788 S
12.8
6.4
4
14
Page 107
160040
A B
C D
PS 0704 S
O7
11
4
1.5
- 6.5
53
- 3.5
3 - 3.5
5
1.5
- 6.5
Page 108
160057
A B
C D
PS 0604 S
3.5
5
3 - 3.5
O6
4
10
3 - 3.5
5
3.5
Page 109
160030
A B
C D
PS 1010 P
10
10
Page 110
160043
A B
C D
PS 0805 S
O8
12.5
4.5
5
5
43.5 -
5
43.5 -
5
Page 109
160033
A B
C D
PS 1212 P
12
12
Page 110
160046
A B
C D
PS 3645 P
3.3
4.5
4
Page 111
160036 A B
C D
PS 810 TE
3.5
10
8
6
12
2 - 5
12
Page 112
160050 A B
C D
PS 812 TE
15
2 - 6
6
12
10
Page 113
160063
A B
C D
PS 1515 P
15
15
3
15
Page 110
160049
25
¬ Up to 52 dB sound-proofing capacity¬ Sound, smoke and fire proofing capacity, tested by professional German testing institute¬ Long-term durability tests¬ Barrier-free¬ Different groove widths¬ For single and double wing doors¬ Internal and external doors¬ Single or double actuation¬ Light weight versions¬ Up to 50 mm travel¬ Complete sealing system for sliding doors¬ Accessories: flush bolts, floor plates, press plates¬ Products tested with EN 1634-1 fire resistance, EN 1634-3 smoke control, BS 476-22, UL and certifire
Athmer - securely sealed.
Acoustic, fire and smoke
When a door is fitted a gap is left between the door and frame to allow the door to open and close. As
essential as this gap is, it can be a path for noise, smoke and dust. The door must be sealed top and bot-
tom together with each side as sound is airborne and will penetrate through any space air can. The door
bottom seal works by filling the air gaps that create sound leaks around the bottom of the doorset, this
also stops smoke, light and dust.
DROP SEALSfor timber doors
26
Technical data
Doppeldicht® M-12/35The slimline acoustic door seal
¬Double actuation for individual floor level ad-
justment
¬Single actuation optional
¬Hinge-side actuator button, stepless
fine adjustment,
¬ deeper grooves up to 40 mm possible
¬Extra depth of groove is covered
with stainless steel mounting bracket
¬Slight subsequent reduction
of door height
¬For use with multipoint
locks
¬Stile dimension: 20 mm
¬Galvanised steel, art. no. 1589
35
12
35
12
12 mm
Double actuation Single actuation
Silicone, self-extinguishing
11 mm
650 mm, n.r. 235 mm, n.r.
708, 833, 958, 1,083, 1,208 mm
1,335 mm
125 mm
1-393 1-392
Art. no. 5220including stainless steel press plate
Groove width
Actuation
Sealing profile material
Maximum travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
Optional: Special mountingbracket
/athmer/1589___q
A B
C D
66
20
Drop seals for timber doors
No CF 5675
27
Technical data
Groove width
Actuation
Sealing profile material
Maximum travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
12 x 20 mm
Single actuation
TPE
12 mm
260 mm
customized
1.525 mm
150 mm (from 525 to 1525)
1-723
M-12/20 RS¬ Small installation dimensions.
¬ Lightweight operation.
¬ Long-term durability tested
with 200,000 test cycles.
¬ Sound-proofing capacity:
- 35 dB with 5 mm sealing height
- 33 dB with 10 mm sealing height
12 x 30 mm
Single actuation
TPE
15 mm
320 mm
ccustomized
1.530 mm
125 mm (from 445 to 1.530)
1-725
A B
C D
M6 C
15 m
m
11,8
30
A B
C D
M5 C
12 m
m
11,8
20
M-12/30 RS¬ Slim design with a width of only 12 mm.
¬ Lightweight operation.
¬ Long-term durability tested
with 200,000 test cycles.
¬ Sound-proofing capacity:
- 37 dB with 4 mm sealing height
- 33 dB with 10 mm sealing height
28
Technical data
Schall-Ex®Slide & Lock M-12 WS¬ Slimmest acoustic door seal
with only 12 mm groove width
¬ High sound reduction values through
patented internal sealing system
¬ With integrated holding magnet
to prevent unintentional opening and to
maintain the actuating pressure
of the seal
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
12 mm
Single actuation
Silicone, self-extinguishing
11 mm
280 mm
708, 833, 958, 1,083, 1,208 mm
1,958 mm
125 mm from 708 mm
1-549
Art. no. 5105 incl. galvanised steelpress plate, holding magnet
Fixing
Schall-Ex® Slide M-12 WS¬ Slimmest acoustic door seal
with only 12 mm groove width
¬ High sound reduction values through
patented internal sealing system
12 mm
Single actuation
Silicone, self-extinguishing
11 mm
280 mm
708, 833, 958, 1,083, 1,208 mm
1,958 mm
125 from 708 mm
1-548
Art. no. 5113including zinc die-cast press plate
35
12
/athmer/1-0393-q
A B
C D
35
12
35
12
Drop seals for timber sliding doors
29
VHH M-12 Set In standard lengths708, 833, 958, 1,083, 1,208 mm (customized lengths available)
Allround sealComplete sealing systemfor sliding doors
¬ Sliding door runs in front of the wall
¬ Increased tightness against:
- Sound
- Draughts
- Smoke
- Smells
¬ For sliding wings up to a width of 1,958 mm
and a weight of up to 80 kg
¬ Intended for butt hinges with
M8 connectors
40+3-1
35
3020
17+1
❶
❻
❼
❷
❷
❹
❺
❺
❸
Packingcontents/delivery packageArticle number: 1-839
❶ Slide-Adapter-12
❷ Schall-Ex Slide M-12 SLA
❸ Slide 5spacer
❹ Athmer - sliding door guide
❺ Magnet
Each
1
2
1
1
2
Optional items
❻ Unitherm Slide 22/22(Untreated beechwood)
❼ Aluminium threshold 253
Art. no. 3-114
Lengths (mm)
2,000 mmArt. no. 319 050
2,500 mmArt. no. 319051
max. 3,000 mm (fixed lengths possible)
Each
2
1
Technical Data Schall-Ex Slide M-12 SLA, art. no. 1-809
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Maximum length
Can be shortened by
12 mm
Single actuation
Silicone, self-extinguishing
11 mm
280 mm
1,958 mm
125 from 708 mm
30
Schall-Ex® L-14/35 EK
¬ High acoustic performance values up
to 48dB in accordance with BS
EN ISO 10140-2: 2010
¬ Covers gaps up to 20 mm
¬ Fire tested for use in doors up to
60 minutes in accordance with
BS 476: Part 22 :1987
¬ Clip-on sliding actuator for safe start-up
¬ Seal adjustment without tools
¬ Installation quicker since no need for
press plate
13,8
35
14 mm
Single actuation
Silicone, self-extinguishing
20 mm
235 mm
635, 735, 835, 1035, 1,135, 1,235 mm
1,635 mm
125 mm from 833 mm
1-935
5519
Technical data
Groove width
Actuation
Sealing profile material
Maximum travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
Drop seals for timber doors
No CF 5675
31
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification
Paul Duggan Certification Manager
CERTIFICATE OF APPROVAL
No CF 5675
This is to certify that, in accordance with
TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
1
Page 1 of 6
ATHMER OHG
Sophienhammer, D-59757, Arnsberg-Muschede
TEL: 49 2932 477 500
Have been assessed against the requirements of the Technical Schedule(s)
denoted below and are approved for use subject to the conditions
appended hereto:
_____________________________________________________________________________________________________
CERTIFIED PRODUCT
TECHNICAL SCHEDULE
Athmer Schall-Ex L-15/30 WS, Schall-Ex L-15/30 OS,
Schall-Ex XL-15/30 WS, Schall-Ex XL-15/30 OS,
Schall-Ex L-15 FS, Schall-Ex Duo L-15 WS,
Schall-Ex Duo L-15 OFS, Schall-Ex Duo L-15/31 OS,
Schall-Ex Duo L-15/30 VS, Schall-Ex Duo L-15/28 OS,
Schall-Ex Duo L-15 QF, Schall-Ex L-14/35 EK,
Schall-Ex Ultra WS double-sided,
Schall-Ex Ultra WS single-sided,
Schall-Ex Ultra OS double-sided,
Schall-Ex Ultra OS single-sided, Stadi L-24/20 WS,
Stadi L-24/20 OS, Stadi L-24/20 TS,
Isolporte Standard Silicone double-sided,
Isolporte Standard Silicone single-sided,
Isolporte Omega double-sided and
Isolporte Omega single-sided Smoke and Acoustic
Seals.
TS21 The Contribution of
Edge Seals to the Control of
Smoke Leakage via Door
Assemblies
Issued:
28 th September 2018
Next audit test due: 28/09/2019
Frequency:
Annually
Valid to:
27 th September 2023
Schall-Ex® L-15 ¬ High sound insulation capacity of up to 52 dB
¬ As DUO version, with double
actuation(from page 36)
¬ Increased stability of form in the door
rebate area
¬ Optimal corner connection
¬ Easy handling with shortened seal length
¬ With optional flush bolt set-up
¬ For single and double-wing door systems
¬ Faster installation due to sliding actuator
without a press plate
¬ Sealing profile made of self-extinguishing
silicone for acoustic, smoke and
fire protection
¬ Perfect seal in combination
with Athmer thresholds (page 87)
¬ Meets requirements for
barrier-free construction
¬ Automatic door seals
carry the “Ü” sign of compliance
R. N
O. P
1B05
0/07
Smoke andfire doors
Acoustic doors
Barrier-free
“Ü” sign of compliance
No CF 5675
32
Fixing
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories (included in delivery)
Schall-Ex® L-15/30 WS¬ Unrivalled sound reduction values:
52 dB with 7 mm sealing height
¬ For sealing heights up to 20 mm
¬ Sturdy inner mechanical parts with
parallel actuation and optimum
floor level adjustment
¬ Clip-on sliding actuator for safe start-up
¬ Seal adjustment without tools
¬ Quicker installation, since no
need for press plate installation
15 mm
Single actuation
Silicone, self-extinguishing
20 mm
235 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm from 833 mm
1-880
Art. no. 5382
14,8
30
14,8
30
Drop seals for timber doors
No CF 5675
33
Technical data
Athmer stainless steelFlush bolt version
Dimensions: 17 mm x 250 mmBolt: Ø 8mm, travel: 15 mm
Door seal prepared forflush bolt TK-15/BXL
Versions Art. no.
For the top:TK-15/T 1653
For the bottom:TK-15/BXL 1792
optional
Flush bolts¬Stainless steel versions for top and bottom
¬Bolt with continuously adjustable height
¬Same milling dimensions at top and bottom
Sealing without gaps even with double-wingdoors
Flush bolt set-up
34
Technical data
Note: Minimum length if flush bolt hole incorporated = distance from drilled hole (X) + 272 mm
Sealing without gaps even with double-wingdoors
Technical data
Material
Installation
Recess required in floor
Stainless steel floor plate andaluminium recess
Fix to floor using 2 countersunk screws Ø 4.5 mm (not supplied).
30 x 40, depth > 26 (mm)
Floor strike recess BS-8¬For Ø 8 mm flush bolt
¬Best possible width and locking position
for steel, timber and tubular frame doors
¬Continuously adjustable range ± 2 mm
in opening and closing direction
¬Art. no. 128
1,2
24
35
4590
1,2
24
35
45
90
Flush bolt set-up¬For Ø 8 mm flush bolt
¬Secure guidance for flush bolt
¬No extra milling required for the flush bolt
assembly in the base of the groove
¬Door seal prepared for flush bolt assembly
¬State dimension X on the order
¬Supply package includes bolt guide plate
Flush bolts¬Flush bolts in two different lengths for locking and rebate flush bolt locks
Type
Flush bolt TS-8/M6
Flush bolt TS-8/M6
Flush bolt TS-8/M10
Flush bolt e TS-8/M10
Bolt guide plate for TS-8...
Connection
M6
M6
M10
M10
1,187mm
1,487mm
1,217mm
1,517mm
Art. no.
1502-1187
1502-1487
1502-1217
1502-1517
5135
Ø
8mm
8mm
8mm
8mm
Drop seals for timber doors
Dimension X
35
Groove width
Actuation
Sealing profile material
Travel
Minimum length (cannot be shortened)
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
Technical data
Schall-Ex® L-15/30 OS¬Can be screw-fixed to lower door surface
¬ Unrivalled sound reduction values:
52 dB with 7 mm sealing height
¬ For sealing heights up to 20 mm
¬ Increased geometrical stability in the
rebate area of the door
¬ Optimal corner connection
¬ Easy handling with shortened seal length
¬ Sturdy inner mechanical parts with
parallel actuation and optimum
floor level adjustment
¬ Clip-on sliding actuator for safe
launch of operation
¬ Seal adjustment without tools
¬ Quicker installation, since no
need for press plate installation
15 mm
Single actuation
Silicone, self-extinguishing
20 mm
235 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm from 833 mm
1-881
-
14,8
27,8
29
1
No CF 5675
36
Schall-Ex® DUO L-15
¬ Door movement leaves no traces:
Double actuation ensures there are no
visible worn areas
¬ Door leaf is no more pushed aside
as easy as never before
¬ High sound absorption value > 50 dB
¬ Spring mechanisms ensure excellent floor
level adjustment even with concave or
convex floors
3 spring mechanisms
¬ Up to 83 % reduction in areas showing wear
¬ Minimal pressure required: barely perceptible
Fixing
Very easy actuationon lock side
Optimal adjustment for uneven floors
No dragging
Drop seals for timber doors
No CF 5675
37
Schall-Ex® DUO L-15 WS
¬Double actuation
¬High sound reduction value > 50dB
with a sealing height of 7 mm
¬No visible worn areas
¬Minimal pressure required for actuation
30
14,8
30
14,8
15 mm
Double actuation
Silicone, self-extinguishing
14 mm
708 mm
708, 833, 958, 1,083, 1,208 mm
1,600 mm
125 mm from 833 mm
1-382
Art. no. 5435including stainless steel press plates
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
No CF 5675
38
Drop seals for timber doors
Further press plates¬To fit different rebate dimensions
736
,8
R4
22,5
5
2,2
0,5
36,8
R4
22,5
5
2,2
0,5
Art. no. 8111
Art. no. 5514
Art. no. 8118
7
20
22
30
17
20
22
30
1
Art. no. 8104
24
22
2,5
0,5
24
22
2,5
0,5
Art. no. 8106
24
30
2,5
0,5
24
30
2,5
0,5
40
35
8
R4
24
8
2,5 1
40
35
8
R4
24
8
2,5 1
30
45
33
181
30
45
33
181
Art. no. 8117
42
23,5
R 8
12
0,8
2,5
42
23,5
R 8
12
0,8
2,5
Art. no. 248
2,5
46
40R
4
8 30
1
2,5
46
40R
4
8 30
1
Art. no. 8107
Standard rebate Non-rebated door Commercial-grade door
Stainless steel
Application
Application
39
Perimeter seals
M - series
The M - series fulfils many tasks. In addition to the usual sound insulation of up to 45 dB, the door seal
tested in Germany can also perform individual tasks such as smoke protection.
Invisibly hidden in the door frame, the M - series is the ideal solution for barrier-free buildings. When the
door is closed and opened, the mechanism of the door seal is activated silently. The actuator releases the
automatic door seal on one or both sides.
The M - series is firmly anchored to the door frame and thus almost invisibly hidden in the door. It meets
even the highest design requirements. The M - series is the ideal choice for quickly and easily sealing doors.
40
M-15/30 OS¬ Sound-proofing capacity, tested by
professional German testing institute
- 45 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
15 x 27 mm
double single
Self-extinguishing-silicone
11 mm
235 mm
customized
1,900 mm
125 mm (from 708 - 1,900 mm)
1-178 1-179
S003 S001
A B
C D
M1 D
14,8
30
271
30
14,8
271
11 m
m11
mm
Drop seals for timber doors
41
M-15/30 WS¬ Sound-proofing capacity, tested by
professional German testing institute
- 45 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Fixing Accessories(included in delivery)
Fixing
15 x 30 mm
double single
Self-extinguishing-silicone
11 mmm
235 mm
customized
1,900 mm
125 mm (from 708 - 1,900 mm)
1-184 1-740 1-185 1-741
angledS004
end capS015
angledS002
end capS014
A B
C D
M1 B
14,8
30
14,8
30
11 m
m11
mm
42
M-15/38 OS¬ Sound-proofing capacity, tested by
professional German testing institute
- 45 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
- 37 dB with 15 mm sealing hight
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
15 x 34 mm
single
Self-extinguishing-silicone
20 mm
300 mm
customized
1,700 mm
125 mm (from 486 to 1,700 mm)
1-169
S001
A B
C D
M2 D
20 m
m20
mm
14,8
30
341
14,8
30
341
Drop seals for timber doors
43
M-15/38 WS¬ Sound-proofing capacity, tested by
professional German testing institute
- 45 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
- 37 dB with 15 mm sealing hight
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
15 x 38 mm
single
Self-extinguishing-silicone
20 mm
300 mm
customized
1,700 mm
125 (from 486 to 1,700 mm)
1-172
S002
A B
C D
14,8
3838
16
M2 B
20 m
m20
mm
14,8
44
Slide M-15/38 WS¬ Specially designed for use on swing doors and sliding doors. ¬ Sound-proofing capacity, tested by professional German testing institute:- 45 dB with 5 mm sealing height- 42 dB with 10 mm sealing height- 37 dB with 15 mm sealing height¬ Smoke-proofing capacity, proved by professional German testing institute in accordance with DIN18095.¬ Long-term durability tested with 200,000 test cycles.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
15 x 38
single actuation
Self-extinguishing-silicone
20 mm
300 mm
customized
1,700 mm
125 mm (from 486 to 1,700 mm)
1-177
S002
A B
C D
14,8
3838
16
M2 B
20 m
m20
mm
14,8
Drop seals for timber sliding doors
45
Barrier Seal M-15/30 WS¬ With resiliently mounted sealing profile.
¬ Use of a threshold (page 87) is recommended
¬ Sound-proofing capacity, tested by
professional German testing institute:
- 44 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
15 x 27 mm
-
PVC
adjustable with a hex key
583 mm
customized
1,700 mm
65 mm on both ends
1-102
S010
15 x 30 mm
-
PVC
adjustable with a hex key
583 mm
customized
1,700 mm
65 mm on both ends
1-103
S009
A B
C D
Athmer M4 D
M4 D
30
14,8
127
A B
C D
Athmer M4 B
14,8
30
M4 B
Barrier Seal M-15/28 OS¬ With resiliently mounted sealing profile.
¬ Use of a threshold (page 87) is recommended
¬ Sound-proofing capacity, tested by
professional German testing institute:
- 44 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095.
Barrier seals for timber doors
46
Schall-Ex® Ultra¬ For all applications:
Acoustic, smoke and fire doors
¬ High sound absorption capacity: >50 dB
¬ Actuation on the opening face with
automatic height and level adjustment
¬ Lock-side actuation,
Minimal pressure required for actuation
¬ Self-adjusting with overload protection
¬ Supply package includes accessories
¬ Optionally with single actuation, e.g.
for the passive wing
¬ Sealing profile made of self-extinguishing
silicone for acoustic, smoke and
fire protection
¬ Superior seal in combination
with Athmer thresholds
¬ Automatic door seals
carry the “Ü” sign of compliance
¬ Schall-Ex®Ultra is the optimal choice for
Damp and wet room doors
¬ Corrosion-tested in accordance with EN 1670
¬ Highest corrosion class 5
= 480 hours of salt spray testing
¬ Double durability testing
under wet-room conditions
¬ Full functionality after 500,000
cycles
Smoke andfire doors
Product family
Acoustic doors
Damp rooms
¬ Anodised housing made of aluminium
for long-term resistance to climatic conditions
¬ Stainless steel springs and rustproof
inner mechanical parts
¬ Silicone profile prevents freezing in position
and ensures flexible seal with the floor
even in icy conditions
Front doors
Drop seals for timber doors
No CF 5675
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification
Paul Duggan Certification Manager
CERTIFICATE OF APPROVAL
No CF 5675
This is to certify that, in accordance with
TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
1
Page 1 of 6
ATHMER OHG
Sophienhammer, D-59757, Arnsberg-Muschede
TEL: 49 2932 477 500
Have been assessed against the requirements of the Technical Schedule(s)
denoted below and are approved for use subject to the conditions
appended hereto:
_____________________________________________________________________________________________________
CERTIFIED PRODUCT
TECHNICAL SCHEDULE
Athmer Schall-Ex L-15/30 WS, Schall-Ex L-15/30 OS,
Schall-Ex XL-15/30 WS, Schall-Ex XL-15/30 OS,
Schall-Ex L-15 FS, Schall-Ex Duo L-15 WS,
Schall-Ex Duo L-15 OFS, Schall-Ex Duo L-15/31 OS,
Schall-Ex Duo L-15/30 VS, Schall-Ex Duo L-15/28 OS,
Schall-Ex Duo L-15 QF, Schall-Ex L-14/35 EK,
Schall-Ex Ultra WS double-sided,
Schall-Ex Ultra WS single-sided,
Schall-Ex Ultra OS double-sided,
Schall-Ex Ultra OS single-sided, Stadi L-24/20 WS,
Stadi L-24/20 OS, Stadi L-24/20 TS,
Isolporte Standard Silicone double-sided,
Isolporte Standard Silicone single-sided,
Isolporte Omega double-sided and
Isolporte Omega single-sided Smoke and Acoustic
Seals.
TS21 The Contribution of
Edge Seals to the Control of
Smoke Leakage via Door
Assemblies
Issued:
28 th September 2018
Next audit test due: 28/09/2019
Frequency:
Annually
Valid to:
27 th September 2023
47
Certificate:"DIN approved -Barrier-free”
R. N
O. P
1B05
0/07
Multi-chamber seal
Barrier-free
Floor level adjustment
Automaticlevel compensation
19,7
30
19,7
30
¬The chambers in the seal help to
provide thermal separation and
break up sound waves
¬Predetermined bending point for improved
inner sealing
¬Practically noiseless operation thanks to
integrated cushioning in the
silicone seal
¬ Meets requirements for
barrier-free construction
¬Floor level adjustment with concave and convex floors
¬With integrated overload protection as standard:
Constant and even, therefore optimal floor contact pressure
¬Saves time, since no fine adjustment necessary
¬Improved operational reliability since the system
self-adjusts if conditions change
48
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
20 mm
Double actua-tion Single actuation
Silicone, self-extinguishing
12 mm
708 mm 220 mm
708, 833, 958, 1,083, 1,208 mm
1,500 mm 2,000 mm
125 mm from 708 mm
1-290 1-291
Art. no. 5600including stainless steel press plates
Art. no. 5610including stainless steel press plate
Schall-Ex® Ultra WS¬ Actuation on the opening face with
automatic height and level adjustment
¬ Lock-side actuation,
Minimal pressure required for actuation
¬ Self-adjusting with overload protection
20 mm
Double actua-tion Single actuation
Silicone, self-extinguishing
12 mm
708 mm 220 mm
708, 833, 958, 1,083, 1,208 mm
1,500 mm 2,000 mm
125 mm from 708 mm
1-292 1-293
Art. no. 5420including stainless steel press plates
Art. no. 5503including stainless steel press plate
Schall-Ex® Ultra OS¬ Actuation on the opening face with
automatic height and level adjustment
¬ Lock-side actuation,
Minimal pressure required for actuation
¬ Self-adjusting with overload protection
¬Tested in accordance with
EN 1670
¬Tested in accordance with
EN 167019,7
35
30
19,7
30
19,7
1,3
28
,7
34,7
Drop seals for timber doors
No CF 5675
49
Flush bolt set-up ¬ For Ø 10 mm standard flush bolt
Optional:
Seal prepared for flush bolt assembly
¬ for smoke and fire protection doors
with standard flush bolt
¬ Available for all backsets
¬ State dimension X on the order
¬ Floor strike recess BS-10 can be used
Technical data
Sealing without gaps even with double-wingdoors
Athmer stainless steelFlush bolt version
Dimensions: 17 mm x 250 mmBolt: Ø 8mm, travel: 15 mm
Door seal prepared forflush bolt TK-20/B-SU
Versions Art. no.
For the top:TK-15/T 1653
For the bottom:TK-20/B-SU 1652-2
Flush bolts¬Stainless steel versions for top and bottom
¬Bolt with continuously adjustable height
¬Same milling dimensions at top and bottom
Dimension X
Flush bolt set-up
Note:
Minimum length if flush bolt hole incorporated = distance from drilled hole (X) + 217 mm
50
Technical data
Material
Installation
Recess required in floor
Article number
Stainless steel floor plate and aluminium recess
Fix to floorusing two countersunk screws Ø 4.5mm.
30 x 40, > 26 depth
129
Stainless steelfloor strike recess BS-10
¬ Best possible width and locking position
for steel, timber and tubular frame doors
¬ Continuously adjustable range ± 2 mm
in opening and closing direction
¬ With its elongated slot, the retainer makes
positioning easy and compensates for any
lateral tolerances
¬ Optimal for automatic locks:
Long mounting surface and wide chamfer
¬ Easy installation with only two diagonally
arranged fixing screws
(customer supply).
1,2
24
35
45
90
1,2
24
35
45
90
Adjustment range: 4 mm90mm
45mm
Stainless steel
Application
Further press plates¬To fit different rebate dimensions
Art. no. 8106
24
30
2,5
0,5
24
30
2,5
0,5
Art. no. 8111
40
35
8
R4
24
8
2,5 1
40
35
8
R4
24
8
2,5 1
30
45
33
181
30
45
33
181
Art. no. 8117
2,5
46
40R
4
8 30
1
2,5
46
40R
4
8 30
1
Art. no. 8107
Standard rebate Non-rebated door Commercial-grade door
Drop seals for timber doors
51
Technical data
Schall-Ex® Slide & Lock M-20 WS¬ Automatic height and
level compensation
¬ Higher safety of use through
self-adjustment to changing conditions
¬ With integrated overload protection
as standard
¬ Optimised sealing profile with sound
reduction > 50 dB with 7 mm
sealing height
¬ Suitable for damp and wet room
doors: tested in accordance with EN 1670
19,7
30
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
20 mm
Single actuation
Silicone, self-extinguishing
12 mm
220 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm from 708 mm
1-550
Art. No. 5103 incl. galvanised steel press plate, holding magnet
Fixing
12
35+5
16,5
39
20
30+4
12,5
24
20+4
7
0 - 5,0
0 - 5,0
0 - 5,0
5,5
5,7
5,5
12
12
35+5
16,5
39
20
30+4
12,5
24
20+4
7
0 - 5,0
0 - 5,0
0 - 5,0
5,5
5,7
5,5
12
52
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
20 mm
Single actuation
Silicone, self-extinguishing
12 mm
220 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm from 708 mm
1-556
Art. no. 5114including zinc die-cast press plate
20 mm
Single actuation
Silicone, self-extinguishing
12 mm
650 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
Cannot be shortened
1-846 (DIN-L) 1-847 DIN/R
Art. no. 5114
Fixing
Schall-Ex® Slide M-20 WS¬ Automatic height and level compensation
¬ Self-adjusting
¬ Integrated overload protection
¬ Sound absorption value > 50 dB with
sealing height of 7 mm
¬ Tested in accordance with EN 1670 ¬ Tested in accordance with EN 1670
¬ Tested in accordance with EN 1670!
Schall-Ex®Slide M-20 WS ZA¬ For installation in sliding doors, with concealed
actuation mechanism on the adjacent closing edge
¬ Automatic height and level compensation
¬ Self-adjusting
¬ Integrated overload protection
Drop seals for timber sliding doors
19,7
30
19,7
30
30
19,7 24
19,7 24
30
53
20 mm
Double actuation Single actuation
Silicone, self-extinguishing, lead rubber
12 mm
708 mm 220 mm
708, 833, 958, 1,083, 1,208 mm
1,500 mm 2,000 mm
125 mm from 708 mm
1-522 1-521
Art. no. 5600including stainless steel press plates
Art. no. 5610including stainless steel press plate
Schall-Ex®Radiation protection WS BD¬ For radiation protection doors with
fire protection requirements
¬ Automatic height and level compensation
¬ Self-adjusting with overload protection
¬ Suitable for use with
radiation protection doors:
in accordance with DIN 6834
19,7
30
19,7
30
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
20 mm
Double actuation Single actuation
Silicone, lead rubber
12 mm
708 mm 220 mm
708, 833, 958, 1,083, 1,208 mm
1,500 mm 2,000 mm
125 mm from 708 mm
1-528 1-529
Art. no. 5600including stainless steel press plates
Art. no. 5610including stainless steel press plate
¬ Suitable for use with
radiation protection doors:
in accordance with DIN 6834
19,7
30
19,7
30
Schall-Ex®Radiation protection WS¬ For doors with
radiation protection requirements
¬ Automatic height and level compensation
¬ Self-adjusting with overload protection
54
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
20 mm
Single actuation
Silicone, lead rubber
12 mm
220 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm from 708 mm
1-551
Art. no. 5103incl. galvanised steel press plate
Fixing
Schall-Ex® Slide & LockRadiation protection M-20 WS¬ Automatic height and level compensation
¬ Self-adjusting
¬ Integrated overload protection
¬ In accordance with DIN 6834
20 mm
Single actuation
Silicone, lead rubber
12 mm
220 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm from 708 mm
1-557
Art. no. 5114including zinc die-cast press plate
Schall-Ex® Slide Radiation protection M-20 WS¬ Automatic height and level compensation
¬ Self-adjusting
¬ Integrated overload protection
¬ In accordance with DIN 6834
Drop seals for timber sliding doors
19,7
30
19,7
30
19,7
30
55
Schall-Ex® Jumbo IFor doors with extremely wide sealing-gaps
Acoustic protection sealing of gaps
up to 35 mm
Actuation on opening face
adjusting screw
Also suitable for fire and smoke
protection doors
No DIN R / L specification necessary
19,5
50
19,5
50
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
20 mm
Single actuation
Silicone, self-extinguishing
35 mm
450 mm
708, 833, 958, 1,083, 1,208 mm
1,700 mm
60 mm, for standard lengths
1-154
Art. no. 5400 including stainless steel press plate
Fixing
Technical data
56
Athmer Rainstop® Barrier-free external door seal
For Athmer, the optimum operating comfort of doors has traditionally been at the top of the agenda in product development. Today we are experiencing that the requirements for barrier-free planning, construction and living are be-coming increasingly important. However, despite the zero threshold and barrier-free access, especially on outside doors, neither wind, driving rain or noise are allowed to penetrate the interior.
With the new Athmer Rainstop® external door seal, Athmer is bringing a door seal onto the market that has been proven to meet all of the above-mentioned requirements.
For timber doors, the sealing system is available as a set with a suitable corner solution.The corner connection consists of a special water-repellent EPDM foam and can be cut to various rebate depths and geometries without any problems and in the shortest possible time. The self-adhesive foam parts can be stuck into the door frames without any unnecessary drying times. A frame gap of three to six millimetres is thus effectively covered without any further adjustment of the seal and the door is protected against driving rain on all sides.
Athmer Rainstop® is threshold-free and therefore scores points not only vis-ually, but also offers maximum accessibility.
5757
Width Height
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Actuation
Athmer Rainstop® M-24/20 WSQuick and reliable installation
¬ Sound reduction up to 51 dB
¬ Suitable for DIN L/R
¬ For doors opening outwards
and inwards
¬ Automatic height adjustment
¬ Set-up for Ø10mm flush bolt
optional
¬ No tools needed for adjustment
24 x 20 mm
Single actuation
Silicone, self-extinguishing
13 mm
300 mm
900, 975, 1,050, 1,125, 1,200, 1,275, 1,350, 1,425 and 1,500 mm
1,500 mm
75 mm on both sides
1-932
Art. no. 5138including stainless steel press plate
Technical data24
20
24
20
R. NO. P1B050/07
58Technische Änderungen vorbehalten | Athmer oHG | Last updated 18.09.2019
D
oret
te-H
aus
in B
erlin
Gol
dbac
h Ki
rchn
er ©
Mar
k A
sipo
wic
z, W
AF
Arc
hite
kten
59
Athmer - securely sealed.
¬ Acoustic, smoke and fire protection¬ Solution for sliding doors¬ Barrier-free¬ For all glass thicknesses¬ Suitable for retrofitting
Acoustic, fire and smoke.
Athmer sealing systems for all glass doors and thicknesses are versatile in use and provide a reliable seal.
Our sealing systems are ideal both for hinged doors and sliding doors (including automatic sliding doors).
DROP SEALSfor glass doors
60
Schall-Ex® GS¬ For all-glass doors
¬ For acoustic, smoke and fire protection
¬ Models available for retrofitting
¬ Available in fixed and standard lengths
¬ Anodised surfaces optional to
Euras or colour coated as per RAL
Product family
¬ Sealing profile made of self-extinguishing
silicone
¬ Superior seal in combination
with Athmer thresholds
¬ Meets requirements for
barrier-free construction
¬ We deliver all automatic door seals
for glass doors with the
“Ü” sign of compliance
¬ To optimise actuation in special frames.
Art. no. 5110 anodised silver-coloured
Art. no. 5118 anodised stainless steel-coloured
(consisting of one pair with
attachment screws)
Optional:Stopper plinth
Sound insulation test reportfor Schall-Ex GS-8available on request
Certificate:"DIN approved -Barrier-free”
A B
C D
/athmer/5110---q
8
30
38
A B
C D
/athmer/5110---q
8
30
38
R. N
O. P
1B05
0/07
Smoke andfire doors
Acoustic doors
Barrier-free
“Ü” sign of compliance
Drop seals for glass doors
61
Fixing
≥ 6 mm
15.4 x 45 mm
single actuation
Silicone, self-extinguishing
11 mm
235 mm
708, 833, 958, 1,083, 1,208 mm
1,333 mm
125 mm
Foil tube
1-814 C-0 1-815 C-31
Art. no. 5115including stainless steel press plate
Glass thickness
Overalldimensions W x H
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
Surface finish
Schall-Ex® GS-A¬For all doors from 6 mm
glass thickness
¬Seal and cover profile
self-adhesive
¬Reduced storage costs
¬Suitable for retrofitting
15,4
45
¬Silver-coloured, anodised C-0
¬Stainless steel-coloured, anodised C-31
Technical data
≥ 6 mm
62
Fixing
≥ 6 mm
15.4 x 45 mm
Single actuation
Silicone, self-extinguishing
11 mm
235 mm
708, 833, 958, 1,083, 1,208 mm
1,958 mm
125 mm
Foil tube
1-875 C-0 1-876 C-31
Art. no. 5503including stainless steel press plate
Glass thickness
Overall dimensions W x H
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
Surface finish
Schall-Ex® Slide GS-A¬ For sliding doors from 6 mm
glass thickness
¬ Seal and separate
cover profile, self-adhesive
¬ Reduced storage costs
¬ Suitable for retrofitting
A B
C D
/athmer/1-875--q
45
15,4
¬ Silver-coloured, anodised C-0
¬ Stainless steel-coloured, anodised C-31
Technical data
Drop seals for sliding glass doors
≥ 6 mm
63
Surface finish
Schall-Ex® GS-H8/12¬ Universal glass door seals for
Doors with glass thicknesses
from 8 - 12 mm
¬ Single actuation
¬ Lock-side cover
made of stainless steel
¬ Reduced storage costs
8 - 12
15,4
2715
¬ Silver-coloured, anodised C-0
¬ Stainless steel-coloured, anodised C-31
8-12 mm
15 + 27 x 15.4 mm
Single actuation
Silicone, self-extinguishing
12 mm
235 mm
708, 833, 958, 1,083, 1,208 mm
1,333 mm
125 mm
Foil tube
1-817 C-0 1-818 C-31
Art. no. 55503 glazing profilesPress plate made of stainless steelCover angle
Technical data
Glass thickness
Dimensions
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
Fixing
64
Technical data
Schall-Ex® Slide GS-H8¬For sliding doors with 8 mm glass thickness
¬Lowest actuation pressure: only 20 N/m
¬Suitable for DIN-L and DIN-R doors
¬For sliding doors with locks
¬Can be used with automatic sliding doors
Schall-Ex® Slide GS-H10¬For sliding doors with 10 mm glass thickness
¬Lowest actuation pressure: only 20 N/m
¬Suitable for DIN-L and DIN-R doors
¬For sliding doors with locks
¬Can be used with automatic sliding doors
Glass thickness
Dimensions
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
Surface finish
10 mm
15 + 32 x 12.6 mm
Single actuation
Silicone, self-extinguishing
11 mm
280 mm
708, 833, 958, 1,083, 1,208 mm
1,605 mm
125 mm
Foil tube
1-572 C-0 1-681 C-31
Art. no. 5424including zinc die-cast press plate
8 mm
15 + 32 x 12.6 mm
Single actuation
Silicone, self-extinguishing
11 mm
280 mm
708, 833, 958, 1,083, 1,208 mm
1,605 mm
125 mm
Foil tube
1-578 C-0 1-680 C-31
Art. no. 5424including zinc die-cast press plate
Fixing
¬ Silver-coloured, anodised C-0
¬ Stainless steel-coloured, anodised C-31
¬ Silver-coloured, anodised C-0
¬ Stainless steel-coloured, anodised C-31
8
1532
12,6
10
1532
12,6
Drop seals for sliding glass doors
65
Technical data
Schall-Ex® Duo GS-H20¬For doors with 20 mm glass thickness
¬Double actuation
¬Minimal, barely perceptible actuation pressure
¬Suitable for DIN-L and DIN-R doors
Schall-Ex® GS-H20¬For doors with 20 mm glass thickness
¬Single actuation
¬Suitable for DIN-L and DIN-R doors
Glass thickness
Dimensions
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
Surface finish
20 mm
35 + 33 x 25.5 mm
Single actuation
Silicone, self-extinguishing
12 mm
220 mm
708, 833, 958, 1,083, 1,208 mm
2,000 mm
125 mm
Foil tube
1-439 C-0
Art. no. 5503including stainless steel press plate
20 mm
35 + 33 x 25.5 mm
Double actuation
Silicone, self-extinguishing
12 mm
708 mm
708, 833, 958, 1,083, 1,208 mm
1,500 mm
125 mm
Foil tube
1-440 C-0
Art. no. 5420including stainless steel press plate
Fixing
¬ Silver-coloured, anodised C-0 ¬ Silver-coloured, anodised C-0
20
3335
25,5
20
3335
25,5
66
"Allround seal"System example for a complete
sealing system for sliding glass doors.
¬ For enhanced seal against noise,
draughts and smoke
¬ Set to be adapted individually to the
door system
We would be pleased to answer your enquiries
and support you with technical know how.
System for one door with door clearance width up to 2 x 1m
Upper door seal
Lateralseals
Lower door seal
Door leaf guide
All-glass sliding doorrunning in front of the wall
Schall-Ex Slide L-20/20 WSArt. 1-796
Aluminium threshold 253 item 3-114+ Slide VN - 8/10 item 523 + Unitherm FAS-20 Art. 319204
Schall-Ex Slide GS H-8 / H-10item 1-578 / 1-572
Sliding doorguide Art. 5106
Example:
System consisting of ¬ Above: Door seal on the door leaf
¬ Below: Schall-Ex® Slide
¬ On the side: seal on the secondary closing edge
Drop seals for sliding glass doors
67
Glasdicht SK¬ For glass doos with any
glass thickness
¬ Self-adhesive, silver-coloured
anodised aluminium profile
¬ With a cover profile for the back
Brush height
Versions
Brush material
Standard lengths
Maximum length
Individually packed
Article number
12 mm 20 mm
Self-adhesive
Horsehair, mixed
708, 833, 958, 1,083, 1,208 mm
3,000 mm
Foil tube
4-158-012 4-158-020
Technical data
Brush seals for glass doors
4512
8,5
45
8,5
20
69
Athmer - securely sealed.
¬ Sound, smoke and fire proofing capacity, tested by professional German testing institute¬ Barrier-free¬ Up to 51 dB sound-proofing capacity¬ Up to 13mm travel¬ Single actuation¬ Products tested withe EN 1634-1 fire resistance, EN 1634-3 smoke control, BS476-22, UL and certifire
Acoustic, fire and smoke.
Made-to-measure system doors call for customised sealing solutions. Doors for use in systems are typically
installed in public buildings, factory halls and other industrial buildings.
DROP SEALSfor metal andsystem doors
70
Athmer Rainstop®Athmer Rainstop® stands for certified quality: the renowned ift Rosenheim certifies the new sealing
system's resistance to driving rain, resistance to wind load and excellent sound reduction values up
to 51dB. Furthermore, Athmer Rainstop has successfully passed salt spray testing by the MPA NRW.
Athmer Rainstop® is based on the technology of the well-known and proven STADI-L series for system
doors and therefore bears the U-sign. The sealing system is certified as barrier-free according to DIN
18040.
System door manufacturers can adapt Athmer Rainstop® individually, according to the geometry of
their aluminium, PVC or steel door in corner areas - each profile door manufacturer requires their own
solution, depending on the position of the seal and the hinge geometry.
We bring competence and experience to the table in cooperation and, together with the manufactur-
ers, develop solutions that provide the highest tightness against wind, driving rain and noise - with
minimal cost and effort.
In individual cases, additional measures such as rain guards, sanding brushes and drainage options
in the threshold area can be taken into account and checked.
����������
��� ������ ���� ���� � � � ���� � ������������� � � � ������� � ������ ���� � � �� � �
���� � �� � �������������� ���
������������
����������� ��������
������������������ ��
�
��������������������������
�
�
������������� �
������������ �
�
� �
�������������������� ��������� ������������������� ��������
������������������
� �����������������������������
� ����������������
�
�
�����������
�������� � ������ ����
���������� �
������ ��� ���
������ ��� ���
������ ��� ���
������� ��� ��
�������������������������� ��������������������
������������
�
��������������������
������������������������������ ���������������������������������������������������������������� ���������������������������� ����������������������������������������������������������������������������������������������
������ �����
��������������������������� ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� �������������������������������������������������������������������������������������������������������������������������� ������������������������������������������������������������������������������������������ ����� ��������������������������������������������������������������������������������������� ������� �����������������������������������������������������
�������������������������
��������������� �������������������������� ���������������������������������������������������� �����������������������
����������������������������������������
�
�����������������������
��������������
�� � ���������
�����������
� �
����� ��
����������������������
����������������� �������� ��������������������������������
���������������
�������� �������������������������������������������������������� ��
������� ������� �����������������������������������������������
������� ������� �����������������������������������������������
���������� ������������������������������ �������������� ����������������������������������������������������
��������� �
�������������������������������������������������������������������������������������������� ¡��� ����� ��¢�� �� � ���
���������������������������������£���
��� ����� �������������������������������������������������������������������������������� ��������������������
�������������������
�
�
����������
������������������������� �������������
�
���������
�������������������������� �������������
�
����������
��������������������������������������� ����������
�
��������������
��������������������������������������
����������
��
24
20
24
20
❶❹❺❻❸
❷
❶ Bellows in the sealing profile for additional
insulation between the outer and sealing profile
❷ W-shaped design transfers the vertical forces
into a lateral sealing movement
❸ The outer lip has a pressure-supporting effect -
more external pressure, the better the seal
❹ Sealing profile made of wear-resistant material ensures
a long life and a permanent seal
❺ Voluminous sealing profile contour stabilises the
lateral overlap of the sealing profile
❻ Contact surfaces optimise the sanding behaviour
Drop seals for metal- and system doors
71
R. NO. P1B050/07
Width Height
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Actuation
Athmer Rainstop® M-24/20 WSQuick and reliable installation
¬ Sound reduction up to 51 dB
¬ Suitable for DIN L/R
¬ For doors opening outwards
and inwards
¬ Automatic height adjustment
¬ Set-up for Ø10mm flush bolt
optional
¬ No tools needed for adjustment
24 x 20 mm
Single actuation
Silicone, self-extinguishing
13 mm
300 mm
900, 975, 1,050, 1,125, 1,200, 1,275, 1,350, 1,425 and 1,500 mm
1,500 mm
75 mm on both sides
1-932
Art. no. 5138including stainless steel press plate
Technical data24
20
24
20
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Masstab
Datum Name
E.-Nr.
Bezeichnung
NameDatumÄnderungIndex
72
M-24/21 OS¬ Sound-proofing capacity, tested by
professional German testing institute
- 44 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
M-24/20 TS¬ Sound-proofing capacity, tested by
professional German testing institute
- 44 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
40 mm
Single actuation
Self-extinguishing-silicone
11 mm
220 mm
customized
4,000 mm
125 (from 676 to 4,000 mm)
1-248
S008
24 mm
Single actuation
Self-extinguishing-silicone
11 mm
220 mm
customized
4,000 mm
125 (from 676 to 4,000 mm)
1-244
S008
A B
C D
24
34
201
24
34
201
M3 D
11 m
m11
mm
A B
C D
20
24
40
20
24
40
M3 C
11 m
m11
mm
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Masstab
Datum Name
E.-Nr.
Bezeichnung
NameDatumÄnderungIndex
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Masstab
Datum Name
E.-Nr.
Bezeichnung
NameDatumÄnderungIndex
Drop seals for metal- and system doors
73
M-24/20 WS¬ Sound-proofing capacity, tested by
professional German testing institute
- 44 dB with 5 mm sealing height
- 42 dB with 10 mm sealing height
¬ Smoke-proofing capacity, tested by
professional German testing institute in
accordance with DIN18095
¬ Fire-proofing capacity tested by professional German testing institute in accordance with DIN4102.
Technical data
Groove width
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
24 mm
Single actuation
Self-extinguishing-silicone
11 mm
220 mm
customized
2,000 mm
125 (from 676 to 2,000 mm)
1-264
S007
A B
C D
M3 B
24
2022
12
15
24
20
11 m
m11
mm
Zeichnungs Nr.
x
x
x
x
x
xUrheberschutzrecht: Diese Zeichnung istunser geistiges Eigentum für die wir unsalle Rechte vorbehalten. Nutzung, sowieVervielfältigung oder Weitergabe andritte sind untersagt.
Material
Verwendung
Datum
Gepr. u. Freigabe
Masstab
Datum Name
E.-Nr.
Bezeichnung
NameDatumÄnderungIndex
75
Athmer - securely sealed.
¬ For smoke, fire and acoustic doors¬ Retrofitting smoke protection according to DIN18095/EN1634¬ Optimal corner connection¬ Concealed screws¬ Up to 50 mm travel¬ Aluminium cover profiles; different coating and colours
Acoustic, fire and smoke.
Selected Athmer door seals can easily be surface mounted - with little installation work during day-to-day
use. Our seals are suitable for various materials and retrofitting (steel, aluminium, PVC, timber or glass) and
different types of doors (sliding or hinged, single or double leaf doors).
Surface mounted seals optimise fire and smoke control, improve acoustic and draught tightness and
resolve problems posed by warped doors or uneven floors.
Surface mounted sealing systems help to save heating costs, enhance living comfort and well-being and
improve the energy balance of the building.
SURFACE MOUNTED SEALS
76
NADI® Seals for retrofitting
Seals for retrofitting of:
¬ Smoke, fire and acoustic
doors
¬ Damp and wet room doors
¬ For single and double-wing doors
¬ Thin and thick rebate doors, flush-
fit doors
¬ Suitable for doors made of timber,
metal, plastic, and glass
¬ Innovative sealing system for
subsequent upgrading
for smoke protection.*
¬ Noise-reduced door closing
with damping function
¬ Quick, secure and inexpensive
installation thanks to pre-formed
corners
¬ Maintenance free system
¬ Can be installed without removing
the door in stock
¬ No additional sealing measures
required
¬ Elegant, snap-on
cover profile without any
visible screws.
Surface silver-coloured, anodised (C-0)
Fire doors
Acoustic doors
Closes with a tight seal
Damp room doors
Barrier-free access
Smoke control
77
Technical data
Width / height, actuated
Standard length
Can be shortened by
Tolerance compensation
Profile material
Sealing profile material
Sealing profile colour
10.3 mm 39 mm
950 mm / 3,000 mm
150 mm on both sides
10 mm (optionally 14 mm)
Aluminium, natural, visible profilesSilver-coloured, anodised C-0
Silicone, self-extinguishing
Grey
25.4 mm 18.5 mm
950 mm / 3,000 mm
150 mm on both sides
10 mm (optionally 14 mm)
Aluminium, natural, visible profilesSilver-coloured, anodised C-0
Silicone, self-extinguishing
Grey
*We confirm the suitability of the NADI frame sealing system® and the automatic Schall-Ex® L-15 FS door seal for the upgrading of a fire protection door based on DIN 18095-2
and EN 1634-3. For potential necessary regulatory approval, we provide a report of the MPA NRW.
¬ For single and double-wing doors
¬ For thin and thick rebate doors
¬ Snap-on cover profile
¬ Elongated holes and pre-formed
corners for quick and easy
installation
Profiles of the NADI® Sets
¬ For single and double-wing doors
¬ For the door threshold
¬ For flush-fit doors
¬ Snap-on cover profile
¬ Elongated holes for quick and
easy installation
¬ High sealing capacity even
with strongly deformed
door leaf
(Testing temperature
200°C for smoke protec-
tion test according to
DIN 18095 /
EN 1634 with 50 Pa)
¬ Max. 10 mm, optionally:
14 mm
A B
C D
/athmer/320299-q
10,3
2613
1414
,5
25,4
13,6
78
NADI® LM SET
Fixing
Optionally
A B
C D
/athmer/320299-q
10,3
2613
A B
C D
/athmer/320292-q
1414
,5
25,4
NADI®-SR
NADI®-SR A
¬ Installation of NADI®: on the closing surface
¬ Installation of automatic door seal: in the groove
¬ Installation NADI®: on the closing surface
¬ Installation of Schall-Ex® L-15 FS: on the closing surface
for reveal mounting
¬ For single and
double-wing doors
¬ Optionally with automatic
seal for retrofitting
Schall-Ex® L-15 FS
Surface mounted seals
79
NADI® FM SET
Fixing
Optionally
¬ Installation of NADI® on the closing surface
¬ Installation of automatic door seal: in the groove
¬ Installation NADI®: on the closing surface
¬ Installation of Schall-Ex® L-15 FS: on the closing surface
for flush-fit installation
¬ For single and
double-wing hinged doors
¬ Optionally with automatic
seal for retrofitting
Schall-Ex® L-15 FS
A B
C D
/athmer/320292-q
1414
,5
25,4
80
Overalldimensions H x W
Actuation
Sealing profile material
Travel
Minimum length (cannot be shortened)
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories (included in delivery)
Fixing
Surface finish
Technical data
54 x 17.2 mm
Single actuation
Silicone, self-extinguishing
20 mm
370 mm (cannot be shortened)
805, 930, 1,055 mm
2,210 mm
125 mm
1-885C-31
1-884C-0
1-888C-34
Art. no. 5314 including stainless steel press plate
Schall-Ex® L-15 FSThe best sound insulation
for retrofitting
¬ For sealing heights up to 20 mm
¬ Snap-on cover profile
¬ Concealed screws
¬ Increased stability of form in the door
rebate area
¬ Optimal corner connection
¬ Easy handling with
shortened seal length
17,2
54
¬ Stainless steel-coloured, anodised C-31
¬ Silver-coloured, anodised C-0
¬ White RAL 9016
Surface mounted seals
81
A B
C D
M7
15 m
m
49
13
M-12 FS¬ For retrofitting on existing doors.
¬ Slim design with a width of only 13 mm.
¬ Lightweight operation.
¬ Long-term durability tested with 200,000
test cycles.
¬ Surface silver or black anodized
¬ Aluminium
¬ Slide-on cover profile
¬ Lightweight operation.
¬ Concealed screws
¬ Silver anodized (C-0)
¬ Black anodized
Technical data
Overall dimensions W x H
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Article number
Accessories(included in delivery)
Fixing
Plinth
Finishes
13 x 49 mm
Single actuation
TPE
15 mm
320 mm
customized
1,200 mm
125 mm (from 445 to 1,200 mm)
1-742
S012
8282
Schall-Ex® Applic¬ For retrofitting smoke protection
¬ For retrofitting acoustic protection
¬ Flexible fit to uneven floors
¬ Use of self-extinguishing
silicone profile
¬ Direct sealing profile system on the door
leaf
¬ Wide silicone profile for flexible
floor level adjustment
¬ Sealing profile extends right into the corners
¬ For carpeted or tiled floors,
use Athmer thresholds
¬ Meets requirements for
barrier-free construction
¬ Supplied with the "Ü" sign of compliance
Acoustic doors
Smoke andfire doors
Fixing ¬ Screw-fixed to the closing surface
¬ Hinge-side actuation
Nachweis Fugenschalldämmung von Füllstoffen
Prüfbericht 167 35299/1
06
-11
/ 6
30
Grundlagen
ift Richtlinie SC-01 „Bestim-mung des Fugenschalldämm-Maßes“ 2002
Darstellung
Verwendungshinweise
Das Verfahren ist zum Ver-gleich von Bauprodukten zur Abdichtung (z.B. Dichtungen, Füllstoffe zur Abdichtung von Fugen) geeignet. Die Messer-gebnisse können zur Abschät-zung des Transmissionsgrades τe nach EN 12354-3 Anhang B herangezogen werden. Die rechnerische Berücksichtigung der Fugenschalldämmung bei der Bestimmung der Gesamt-schalldämmung ersetzt jedoch nicht den Nachweis für eine Gesamtkonstruktion.
Gültigkeit
Die genannten Daten und Er-gebnisse beziehen sich aus-schließlich auf den geprüften und beschriebenen Probekör-per.
Die Prüfung der Schall-dämmung ermöglicht keine Aussage über weitere leistungs- und qualitätsbestim-menden Eigenschaften der vor-liegenden Konstruktion.
Veröffentlichungshinweise
Es gilt das ift-Merkblatt „Bedin-gungen und Hinweise zur Ver-wendung von ift-Prüf-dokumentationen“ und Merk-blatt SC 02/1 „Bestimmung der Schalldämmung einer Tür mit Bodendichtung“.
Inhalt
Der Prüfbericht umfasst insge-samt 8 Seiten
1 Gegenstand 2 Durchführung 3 Einzelergebnisse 4 Verwendungshinweise Messblatt (1 Seite)
Auftraggeber Athmer OHG Sophienhammer 59757 Arnsberg
Produkt
Absenkbare Bodendichtung, aufgesetzt, einseitig auslö-send
Bezeichnung Schall-Ex Applic A und Applic T
Bodenluft 5 mm
Besonderheiten -/-
Bewertetes Fugenschalldämm-Maß RST,w
Spektrum-Anpassungswerte C und Ctr
Applic A: RST,w (C;Ctr) = 41 (-1;-1) dB
Applic T: RST,w (C;Ctr) = 43 (-2;-2) dB
ift Rosenheim 23. Februar 2008
Dr. Joachim Hessinger, Dipl.-Phys. Prüfstellenleiter ift Schallschutzzentrum
Bernd Saß, Dipl.-Ing. (FH) Stv. Prüfstellenleiter ift Schallschutzzentrum
Test report available on request
Barrier-free
“Ü” sign of compliance
Schall-Ex® Applic is suitable for use with fire
doors and smoke protection doors. We recom-
mend the following procedure:
The door manufacturer (type plate on the door)
should approve the door seal.
The door manufacturer will be supported by us in
doing so.
Retrofitting is only possible with the permission of
the building supervisory authority/fire authority.
Surface mounted seals
14,5
46
8382
Technical data
Schall-Ex® Applic A
¬Aluminium
¬Snap-on cover profile
¬Concealed screws
Plinth
Overalldimensions W x H
Actuation
Sealing profile material
Travel
Minimum length
Standard lengths
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
Finishes ¬Silver-coloured, anodised C-0
¬White, powder-coated RAL 9016,
¬Dark bronze, anodised (C-34)
14.5 x 46 mm
Single actuation
Silicone, self-extinguishing
Recommended 5 mm (max.11 mm)
235 mm (cannot be shortened)
805, 930, 1,055 mm
1,333 mm
125 mm
Foil tube
1-658C-0
1-668RAL 9016
1-669C-34
Art. no. 5126including stainless steel press plate
Fixing
14,5
46
14.5 x 46 mm
1-sided, opening face
Silicone, self-extinguishing
Recommended 5 mm (max.11 mm)
235 mm (cannot be shortened)
805, 930, 1,055 mm
1,333 mm
125 mm
Foil tube
1-717C-0
1-810RAL 9016
1-811C-34
Art. no. 5129including zinc die-cast press plateand cushioning
Schall-Ex® Slide Applic A¬For sliding doors running in front of the wall
¬Silver-coloured, anodised C-0
¬White, powder-coated RAL 9016
¬Dark bronze, anodised (C-34)
¬Aluminium
¬Snap-on cover profile
¬Concealed screws
14,5
46
84
22 x 81 mm
Single actuation
Silicone, self-extinguishing
50 mm
710 mm (cannot be shortened)
1,700 mm
60 mm
Foil tube
1-474
Art. no. 5935 incl. pressplateof steel, GV
Overalldimensions W x H
Actuation
Sealing profile material
Travel
Minimum length
Maximum length
Can be shortened by
Individually packed
Article number
Accessories(included in delivery)
22 x 52.5 mm
Single actuation
Silicone, self-extinguishing
35 mm
450 mm (cannot be shortened)
1,700 mm
60 mm
Foil tube
1-157
Art. no. 5935 incl. pressplateof steel, GV
Technical data
FixingJumbo II and III
Plinth
Schall-Ex® Jumbo II¬ Seals doors and gates with
extremely wide gaps up to 50 mm
¬ Suitable for acoustic doors
Schall-Ex® Jumbo III¬ Seals doors and gates with
extremely wide gaps up to 35 mm
¬ Suitable for acoustic doors
¬Robust stainless steel cover¬ Robust stainless steel cover
Surface mounted seals
81
2
22
20
10
5
2
80
52
,5
22
85
Alu
min
ium
Silv
er-c
olou
red,
ano
dise
d O
ptio
nally
: Ano
dise
d sh
ades
acc
ordi
ng to
EU
RAS
Aluminium threshold 090Art. no. 3-111
Aluminium threshold 253Art. no. 3-114
Aluminium threshold 088Art. no. 3-117
Aluminium threshold 277Art. no. 3-104
Aluminium threshold 308Art. no. 3-120
Aluminium threshold 278Art. no. 3-108
Aluminium threshold 217Art. no. 3-100
Aluminium threshold 496Art. no. 3-152
540
4,536
30 3
6
56 2,5
6
30 3
356
2
53055
56 2,5
10
Stai
nles
s st
eel
With
bru
shed
mat
t fini
sh, w
ith p
rote
ctiv
e fo
il
Stainless steel threshold 164Art. no. 3-107
Stainless steel threshold 365Art. no. 3-135
Stainless steel threshold 288Art. no. 3-103
Stainless steel threshold 513Art. no. 3-150
5
40
2,540
2
3055
5
For carpets and tiled floors¬Up to 22 dB better sound reduction in combination
with Athmer drop seals
¬Partition of the carpet recommended
¬Smooth contact surface is created
¬Joints are sealed
¬Thresholds (aluminium and stainless steel) available with or without drill holes
Optimal performance of seal!
Thresholds
2,555
86
Technical data
Technical data
Nirobros¬Carrier profile: Stainless steel
Alubros¬Carrier profile: Anodised aluminium
Ferrobros¬Carrier profile: Steel, GV
NE 4.0 NE 4.0
4-436 4-440
In-groove In-groove
4 mm 4 mm
4 mm 4 mm
Black PA Horsehair, mixed
2,700 mm 2,700 mm
Type
Article number
Fixing
FB
FH
Brush material
Max. length
Type
Article number
Fixing
FB
FH
Brush material
Max. length
FA 25-6 FA 25-6 FA 40-9
4-306 4-310 4-324
Screw-on Screw-on Screw-on
6 mm 6 mm 9 mm
25 mm 25 mm 40 mm
Black PA Horsehair, mixed Black PA
2,700 mm 2,700 mm 2,700 mm
Type
Article number
Fixing
FB
FH
Brush material
Max. length
FE 4.0 FE 4.0 FU 16-7 FU 16-7
4-336 4-340 4-354 4-358
In-groove In-groove Screw-under Screw-under
4 mm 4 mm 16 mm 16 mm
4 mm 4 mm 7 mm 7 mm
Black PA Horsehair, mixed Black PA Horsehair, mixed
2,700 mm 2,700 mm 2,700 mm 2,700 mm
AU 18-9 silver AU 18-9 silver AA 25-8 silver AA 25-8 silver
4-133 4-134 4-121 4-122
Screw-under Screw-under Screw-on Screw-on
18 mm 18 mm 8.5 mm 8.5 mm
10 mm 10 mm 25 mm 25 mm
Black PA Horsehair, mixed Black PA Horsehair, mixed
2,700 mm 2,700 mm 2,700 mm 2,700 mm
Brush seals
87
SUPER brush seal¬ Flexibly mounted
¬ Flat aluminium adhesive carrier profile
Fixing
Colour
Standard lengths
Trim
Individual packaging
Article number
Self-adhesive
White aluminium housing RAL 9016,Sepia brown aluminium RAL 8014, powder-coated
1,000 mm
15 mm, black horsehair
SB packaging / shrink wrap tubing
33007 white 33008 brown
Technical data
Technical data
Tolerances
KU III¬Carrier profile: Plastic, white or brown
Type
In-groove NE 4 + FE 4
FA 25 + FU 16 screw-on and screw-under
Screw-on and screw-under FA 40
Screw-on and screw-under AU + AA
Lengths Mounting height Brush height Mounting width Total height
+/- 2 mm + /- 0,7 mm +/- 1 mm + 0,7/- 0,5 mm +/- 1 mm
+/- 2 mm +/- 2 mm +/- 2 mm +/- 0,7 mm +/- 2 mm
+/- 2 mm + 3/-2 mm +/- 3 mm +/- 1 mm +/- 3 mm
+/- 2 mm +/- 0,25 mm +/- 2 mm +/- 0,25 mm +/- 2 mm
Type
Article number
Fixing
FB
FH
Brush material
Brush height (min./max.)
Max. length
KU III white KU III brown
332 333
Screw-on Screw-on
7,5 mm 7,5 mm
21 mm 21,5 mm
Grey PP Grey PP
7 mm 7 mm
2,400 mm 2,400 mm
Properties
Max. water absorption
Abrasion behaviour
Resilience
UV resistance
Temperature range
Electric conductivity
+ = poor
++ = medium
+++ = good
Natural bristles
Horsehair, mixed
Not suitable for continuous stress
+
++
+++
-20°C to +150°C
++
Synthetic bristles
Polyamide PA 6.0 black
10 %
++
++
++
-20°C to +100°C
++
7
2415
17,5
3,521
7
89
Athmer - securely sealed.
Intumescent sealIntumescent seal sizes are available from 10 x 4 mm up to 38 x 4 mm. Supplied in a standard from 1,000 mm to 3,000 mm, the fire door seal can easily be cut to size.
Intumescent brushFire and smoke intumescent strip combines intumescent material with a brush pile to prevent the trans-fer of both fire and smoke from one side of a timber door to another
Double fin intumescentAdditionally to fire and smoke protection, rubber fins improve the acoustic performance. Due to the design, double fin intumescents can be easily cleaned and disinfected. This makes it a popular appli-cation in hospitals and food preparation area.
Fire and smoke.
Our fire and smoke intumescent seals all have been independently tested on a range of single and dou-
ble leaf doorsets. Fire and smoke intumescent seals protect both the spread of fire and smoke through a
building. Manufactured with a moisture resistant intumescent, all products are suitable for use in wet or
dry areas. All strips are supplied with strong self-adhesive backing.
INTUMESCENTFIRE SEALS
¬
¬
¬
White similar to
RAL 9003
Brown RAL 8017
Red RAL 3020
Black RAL 9004
90
¬ intumescent seal rebated into timber door frames¬ provides fire protection¬ moisture resistant material suitable for use in both internal and external environments¬ supplied with strong self-adhesive backing¬ exhibits expansion characteristics exceeding 20 times its original volume
1. Identify the correct dimension and location for the intumescent seal using the door test evidence.2. Rout a suitable groove based on the dimension and location of intumescent seal required, cleaning the rebate to remove any dust. 3. Remove the self-adhesive release paper from the product and push fit into the groove.4. To ensure sufficient adhesion seals must be applied to clean, dry surfaces at temperatures between +5°C and +40°C.
FP 1004, FP 1504, FP 2004, FP 3004, FP 3804Key features
Installation
Intumescent strips
FP-series
10
4
FP-series
15
4
FP-series
20
4
FP-series
30
4
FP-series
38
4
Technical data
Article numbers and cross section drawings
FP 1004
red brown white black
F160052 F160053 F160054 F160105
FP 1504
red brown white black
F160055 F160056 F160057 F160106
FP 2004
red brown white black
F160058 F160059 F160060 F160107
FP 3004
red brown white black
F160061 F160062 F160063 F160109
FP 3804
red brown white black
F160064 F160065 F160066 F160108
Material PVC (flexible and rigid poly-vinyl chloride)- encapsulated graphite intumescent
Length 2.1, 2.4, 3.0 m
91
¬ intumescent seal rebated into timber door frames¬ provides fire and smoke protection¬ moisture resistant material suitable for use in both internal and external environments¬ supplied with strong self-adhesive backing¬ exhibits expansion characteristics exceeding 20 times its original volume
1. Identify the correct dimension and location for the intumescent seal using the door test evidence.2. Rout a suitable groove based on the dimension and location of intumescent seal required, cleaning the reba te to remove any dust. 3. Remove the self-adhesive release paper from the product and push fit into the groove.4. To ensure sufficient adhesion seals must be applied to clean, dry surfaces at temperatures between +5°C and +40°C.
FB 1004, FB 1504, FB 2004Key features
Installation
FB-series
10
4
3
FB-series
15
4
3
FB-series
20
4
3
Technical data
Article numbers and cross section drawings
FB 1004
red brown white black
F160067 F160068 F160069 F160110
FB 1504
red brown white black
F160070 F160071 F160072 F160111
FB 2004
red brown white black
F160073 F160074 F160075 F160112
MaterialPVC (flexible and rigid poly-vinyl chloride)- encapsulated graphite intumescent, with a PP (Polypropylene) brush
Length 2.1, 2.4, 3.0 m
92
¬ intumescent seal rebated into timber door frames¬ provides fire, smoke and acoustic protection¬ Moisture resistant material suitable for use in both internal and external environments¬ supplied with strong self-adhesive backing¬ exhibits expansion characteristics exceeding 20 times its original volume
1. Identify the correct dimension and location for the intumescent seal using the door test evidence.2. Rout a suitable groove based on the dimension and location of intumescent seal required, cleaning the rebate to remove any dust. 3. Remove the self-adhesive release paper from the product and push fit into the groove.4. To ensure sufficient adhesion seals must be applied to clean, dry surfaces at temperatures between +5°C and +40°C.
FF 1004 D, FF 1504 D, FF 2004 DKey features
Installation
Intumescent strips
FF-series
10
4
4
FF-series
15
4
4
FF-series
20
4
4
Technical data
Article numbers and cross section drawings
FF 1004 D
red brown white black
F160076 F160077 F160078 F160113
FF 1504 D
red brown white black
F160079 F160080 F160081 F160114
FF 2004 D
red brown white black
F160082 F160083 F160084 F160115
MaterialPVC (flexible and rigid poly-vinyl chloride)- encapsulated graphite intumescent, with a soft-PVC fin
Length 2.1, 2.4, 3.0 m
93
F 1002, F 1502, F 2002, F 2502, F 3002, F 0702, F 1004, F 2004
¬ intumescent seal rebated into timber door frames¬ provides fire protection¬ Moisture resistant material suitable for use in both internal and external environments¬ supplied with strong self-adhesive backing¬ exhibits expansion characteristics exceeding 20 times its original volume
1. In order to ensure correct adhesion, clean the substrate so it is free from grease, dirt and dust. 3. Remove the self-adhesive release paper from the product and push fit into the groove.4. To ensure sufficient adhesion seals must be applied to clean, dry surfaces at temperatures between +5°C and +40°C.
Key features
Installation
F-series
10
2
F-series
15
2
F-series
20
2
Technical data
Article numbers and cross section drawings
F 1002
red brown white black natural (graphite grey)
F160091 F160092 F160093 F160116 F160095
F 1502
red brown white black natural (graphite grey)
F160088 F160089 F160090 F160117 F160096
F 2002
red brown white black natural (graphite grey)
F160085 F160086 F160087 F160118 F160097
F 2502
red brown white black natural (graphite grey)
F160098 F160099 F160100 F160119 F160101
F 3002
red brown white black natural (graphite grey)
F160102 F160103 F160104 F160120 F160105
F 1004
natural (graphite grey)
F160121
A B
C D
F 1004
10
4
F 2004
natural (graphite grey)
F160122
A B
C D
F2004
20
4
F-series
25
2
F-series
30
2
Material PVC (flexible and rigid poly-vinyl chloride)- encapsulated graphite intumescent
Length 2.1, 2.4, 3.0 m
95
Athmer - securely sealed.
Perimeter seals have become an integral part of the design of new doorsets and the upgrading of existing ones. They work by filling the air gaps that naturally form between the door and door frame. Filling these gaps, the seals help to provide a barrier against smoke, sound, weather and dirt.
PERIMETER SEALS
¬ Easy to cut¬ Self-adhesive backing available¬ Sound reduction up to 52dB¬ Prohibits the passage of smoke, fire, waether, sound and dirt¬ Efficient solution for controlling air infiltration or where sound attenuation is required¬ Select products suitable for use with fire doors
Black similar to
RAL 9004
Brown RAL 8017
White RAL 9003
Grey RAL 7042
96
Perimeter seals
Schall-Ex® AP Series
Perimeter seals
The special function provided by Athmers func-
tional seals for interior doors sets them apart
from commonly available damping seals. Our
perimeter seals have uniquely soft and com-
fortable closing characteristics. Our seals are
suitable for door designs with convenient and
unfavourable swivel points. They provide very
good acoustic insulation of up to 52 dB and are
highly suitable for industrial processing. Profiles
can be used as smoke-protection door seals as
per EN 1634-3.
¬ for glass doors
¬ easy installation and secure retention
¬ Straight seating in the groove with all
door frame materials
¬ Reliable function with very
good acoustic insulation properties
¬ Material TPE or silicone
Fire doors
Acoustic doors
Draught
Smoke control
Perimeter seals
97
Perimeter seals
¬ smoke protection¬ sound insulation 45 dB¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 1015 TEKey features
Installation
Material TPE
Length 100 m
Bundle 100 m
Working temperature -40°C to +180°C
Suitable for gap size 4 - 6 mm
Optimum gap size 5 mm
A B
C D
Schall-Ex AP 1015 TE
12
4 - 6
7
5
4
12
4.5
66.
5
12
Technical data
Schall-Ex® AP 1015 TE
black beige brown white
P160069 P160070 P160071 P160072
Article numbers and cross section drawings
A B
C D
Schall-Ex AP 1015 TE
12
4 - 6
7
5
4
12
4.5
66.
5
12
98
Perimeter seals
¬ smoke protection¬ for fire doors¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 1018 SKey features
Installation
Material silicone, self-extinguishing
Length 50 m
Bundle 2 x 25 m
Working temperature -60°C to +250°C
Suitable for gap size 5 - 7 mm
Optimum gap size 5 mm
A B
C D
AP 1018 S
124
8
4,5
5 75
12
A B
C D
AP 1018 S
124
8
4,5
5 75
12
Technical data
Schall-Ex® AP 1018 S
black beige brown white
P160001 P160002 P160003 P160004
Article numbers and cross section drawings
99
¬ smoke protection¬ sound insulation 48 dB¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 1018 TEKey features
Installation
Material TPE
Length 100 m
Bundle 100 m
Working temperature -40°C to +180°C
Hardness 50 Shore A
Suitable for gap size 5 - 7 mm
Optimum gap size 5 mm
A B
C D
AP 1018 TE
412
75
4,5
58
12
A B
C D
AP 1018 TE
412
75
4,5
58
12
Technical data
Schall-Ex® AP 1018 TE
black beige brown white
P160005 P160006 P160007 P160008
Article numbers and cross section drawings
100
Perimeter seals
¬ smoke protection¬ sound insulation 45 dB¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 1019 TEKey features
Installation
Material TPE
Length 150 m
Bundle 150 m
Working temperature -40°C to +180°C
Hardness 60 Shore A
Suitable for gap size 5 - 8 mm
Optimum gap size 5 mm
A B
C D
AP 1018 TE
412
75
4,5
58
12
A B
C D
AP 1018 TE
412
75
4,5
58
12
Technical data
Schall-Ex® AP 1019 TE
black beige brown white
P160009 P160010 P160011 P160012
Article numbers and cross section drawings
101
¬ smoke protection¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors¬ for metal door frames
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 2018 TEKey features
Installation
Material TPE
Length 75 m
Bundle 5 x 15 m
Working temperature -40°C to +180°C
Hardness 60 Shore A
Suitable for gap size 4.5 - 6 mm
Optimum gap size 4.5 mm
A B
C D
AP 1018 TE
412
75
4,5
58
12
A B
C D
AP 1018 TE
412
75
4,5
58
12
Technical data
Schall-Ex® AP 2018 TE
black beige brown white
P160013 P160014 P160015 P160016
Article numbers and cross section drawings
102
Perimeter seals
¬ smoke protection¬ sound insulation 52 dB¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 1020 TSKey features
Installation
Material TPS
Length 100 m
Bundle 100 m
Working temperature -40°C to +180°C
Hardness 23 Shore A
Suitable for gap size 5 - 6.5 mm
Optimum gap size 5 mm
A B
C D
AP 1020 TS
4,5
12
6,2
7,5
412
75
Technical data
Schall-Ex® AP 1020 TS
black beige brown white grey
P160017 P160018 P160019 P160020 P160021
Article numbers and cross section drawings
A B
C D
AP 1020 TS
4,5
12
6,2
7,5
412
75
103
¬ smoke protection¬ for internal doors with beneficial and adverse pivot point¬ for main entrance doors
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Schall-Ex® AP 1023 TSKey features
Installation
Material TPS
Length 150 m
Bundle 150 m
Working temperature -40°C to +180°C
Hardness 23 Shore A
Suitable for gap size 5 - 8 mm
Optimum gap size 5 mm
A B
C D
AP 1023 TS
inactive leaf
active leaf
5 -1
5
138
9
5.6
12.5
7
Technical data
Schall-Ex® AP 1020 TS
black beige brown white grey
P160022 P160023 P160024 P160025 P160026
Article numbers and cross section drawings
A B
C D
AP 1023 TS
inactive leaf
active leaf
5 -1
5
138
9
5.6
12.5
7
104
16,5
12,5
12,5
12+1
14 -1
empfohlene Nut:
8±2
A B
C D
/athmer/319050-q
22
2212
Standard length
Article number
Sealing profile material
Sealing profile colour
Available by the metre
210
Silicone
Grey
2,000 mm 2,500 mm
319 050 319 051
Silicone + beechwood
Grey
A B
C D
/athmer/284----q
7
5,5
A B
C D
/athmer/523----q
11
3
Slide 5 for VHH Slide VN - 8/10
Standard length
Article number
Sealing profile material
Sealing profile colour
Available by the metre
284
Silicone
Grey
Available by the metre
523
Silicone
Transparent
ZD Universal¬ Steel frame seal for
different groove widths
¬ As replacement for many well-known
frame seal brands
¬ Groove width 11 mm
¬ Hinge diameter 3 - 7 mm
11
10
8
11
10
8
11
10
8
Type
Article number
Length / Bundle measuring
Material
Colour
Technical data
Technical data
Technical data
/athmer/371300-q
A B
C D
ZD Universal
370 300
5 m
TPE
Grey (Custom colours available starting at a length of 800 m)
ZD Slide - 12/12 Unitherm Slide 22/22
Perimeter seals
105
Standard length
Article number
Sealing profile material
Sealing profile colour
Holding rail material
Standard length
Article number
Sealing profile material
Sealing profile colour
Holding rail material
2,100 mm
319 200
TPE
Brown, Beech
Beechwood
2,100 mm
319 080
TPE
Transparent, Aluminium
Aluminium
2,100 mm
319 000
PVC
Transparent, Beech
Beechwood
Technical data
Technical data
A B
C D
/athmer/319204-q
8,5
2026
Length
Article number
Sealing profile material
Sealing profile colour
Holding rail material
Alternativefinishes
2,100 mm
319 204C-0
319208RAL 9016
319205C-34
Permanently elastic TPE
Grey / brown / transparent
Aluminium
Anodised surfaces according to EURAS
Colour-coated as per RAL
Technical data
Unitherm FAS-20¬ High tolerance compensation
¬ Also dampens the
sound of closing
¬ Sturdy aluminium carrier profile
¬ Silver C-0 / RAL 9016 finish
white / bronze C-34
/athmer/319000-q
A B
C D
8
1421
Unitherm I
Unitherm XIII
Unitherm II HG
/athmer/319080-q
A B
C D
5
15
/athmer/319200-q
A B
C D
8
10
17
106
Perimeter seals
¬ smoke protection¬ 1,000,000 cycle test¬ anti-microbial additive¬ CERTIFIRE CF629¬ can be used against frame reveal or stop
¬ contact surfaces must be clean and any paint well-cured, to ensure proper adhesion¬ to be glued with self-adhesive tape onto the stop section of the door frame¬ profile ends to be miter-cut or welded¬ do not use any aggressive material for cleaning
PS 710 PKey features
Installation
Frame timber
Material PVC (flexible and rigid poly-vinyl chloride)
Length 2.1, 2.4, 3.0 m
MOQ
Working temperature -40°C to + 180°C
Hardness 60 Shore A
Suitable for gap size 2.5 - 5.5 mm
Optimum gap size 4 mm
A B
C D
PS 710 P
4
1 - 2
10
10.5
6 1 - 2
4
Article numbers and cross section drawings
PS 710 P
black brown white
P160037 P160038 P160039
Technical data
107
¬ self-adhesive, bulb-shaped perimeter seal¬ equipped with a durable, self-adhesive backing tape at the bottom.¬ suitable for smoke protection¬ suitable for sound insulation¬ large tolerance compensation
PS 788 SKey features
¬ contact surfaces must be clean and any paint well-cured, to ensure proper adhesion¬ to be glued with self-adhesive tape onto the stop section of the door frame¬ profile ends to be miter-cut or welded¬ do not use any aggressive material for cleaning
Installation
Frame timber
Material silicone, self-extinguishing
Length 25 m / coil
MOQ 100 m
Working temperature -60°C to +25°C
Hardness 65 Shore A
Suitable for gap size 2.0 - 5.5 mm
Optimum gap size 4 mm
A B
C D
PS 788 S
12.8
6.4
4
14
Article numbers and cross section drawings
PS 788 S
black brown white
P160040 P160041 P160042
Technical data
108
Perimeter seals
¬ tubular-shaped perimeter seal¬ large tolerance compensation¬ suitable for acoustic insulation ¬ suitable for smoke protection¬ for timber doors and windows
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
PS 0704 SKey features
Installation
A B
C D
PS 0704 S
O7
11
4
1.5
- 6.5
53
- 3.5
3 - 3.5
5
1.5
- 6.5
A B
C D
PS 0704 S
O7
11
4
1.5
- 6.5
53
- 3.5
3 - 3.5
5
1.5
- 6.5
Frame timber
Material silicone
Length 100 m/ coil
MOQ 100 m
Working temperature -60°C to +250°C
Hardness 65 Shore A
Suitable for gap size 1.5 - 6.5 mm
Optimum gap size 4 mm
Article numbers and cross section drawings
PS 0704 S
black brown white
P160057 P160056 P160065
Technical data
109
¬ tubular-shaped perimeter seals in various diameters¬ integrated thread prevents stretching ¬ large tolerance compensation¬ suitable for smoke protection¬ suitable for sound insulation¬ for timber doors and windows
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
PS 0402 S, PS 0604 S, PS 0805 SKey features
Installation
Type Suitable for gap size Optimum gap size
PS 0402 S 1.5 - 3.5 mm 2 mm
PS 0604 S 1.5 - 5.5 mm 3.5 mm
PS 0805 S 1.5 - 7 mm 5 mm
Gap size
Technical data
Frame timber
Material silicone
Length 100 m/ coil
MOQ 100 m
Working temperature -60°C to +250°C
Hardness 65 Shore A
PS 0402 S
black white brown
P160027 P160028 P160029
Article numbers and cross section drawings
PS 0604 S
black white brown
P160030 P160031 P160032
PS 0805 S
black white brown
P160033 P160034 P160035
A B
C D
PS 0402 S
O4
7.4
4
25
3 - 3.5
2
3 - 3.5
5
A B
C D
PS 0402 S
O4
7.4
4
25
3 - 3.5
2
3 - 3.5
5
A B
C D
PS 0604 S
3.5
5
3 - 3.5
O6
4
10
3 - 3.5
5
3.5
A B
C D
PS 0604 S
3.5
5
3 - 3.5
O6
4
10
3 - 3.5
5
3.5
A B
C D
PS 0805 S
O8
12.5
4.5
5
5
43.5 -
5
43.5 -
5
A B
C D
PS 0805 S
O8
12.5
4.5
5
5
43.5 -
5
43.5 -
5
110
Perimeter seals
Perimeter seals
PS 1010 P, PS 1212 P, PS 1515 P
¬ self-adhesive perimeter seal for internal doors ¬ perimeter seals in various diameters¬ equipped with a durable, self-adhesive backing tape on two sides of the seal. ¬ large tolerance compensation¬ antibacterial material, ideally suited for use in hospitals ¬ suitable for sound insulation¬ suitable for smoke protection
¬ contact surfaces must be clean and any paint well-cured, to ensure proper adhesion¬ to be glued with self-adhesive tape onto the stop section of the door frame¬ profile ends to be miter-cut or welded¬ do not use any aggressive material for cleaning
Key features
Installation
Frame timber, metal
Material PVC (flexible and rigid poly-vinyl chloride)
Length 2.1, 2.4, 3.0 m
MOQ 100 m
Working temperature -60°C to +250°C
Hardness 65 Shore A
Technical data
PS 1010 P
black brown white transparent
P160043 P160044 P160045 P160052
Gap size
Suitable for gap size Optimum gap size
PS 0402 S 1.5 - 3.5 mm 2 mm
PS 0604 S 1.5 - 5.5 mm 3.5 mm
PS 0805 S 1.5 - 7 mm 5 mm
Article numbers and cross section drawings
A B
C D
PS 1010 P
10
10
A B
C D
PS 1212 P
12
12
A B
C D
PS 1515 P
15
15
3
15
PS 1212 P
black brown white transparent grey
P160046 P160047 P160048 P160053 P160068
PS 1515 P
black brown white transparent grey
P160049 P160050 P160051 P160054 P160055
111
Perimeter seals
¬ inconspicuous small perimeter seal with two slim elastomeric sealing blades for installation into a groove¬ suitable for sound insulation ¬ suitable for smoke protection
¬ installation into a groove¬ profile ends to be miter-cut¬ do not use any aggressive material for cleaning
Key features
Installation
PS 3645 P, PS 3665 P
Technical data
Frame timber
Material PVC (flexible and rigid poly-vinyl chloride)
Length 2.100, 2.400, 3.000 mm
MOQ 100 m
Working temperature -60°C to +250°C
Hardness 70 Shore D
Suitable for gap size Optimum gap size
PS 3645 P 2.0 - 3.5 mm 3 mm
PS 3665 P 3.0 - 5.5 mm 4.5 mm
Gap size
Article numbers and cross section drawings
black
PS 3645 P P160036
PS 3665 P P160058
A B
C D
PS 3645 P
3.3
4.5
4
A B
C D
PS 3665 P
3.3
4.5
6
PS 3645 P PS 3665 P
112
Perimeter seals
Perimeter seals
¬ smoke protection¬ stop-mounted compression seal ¬ self-adhesive backing ¬ easy installation
¬ contact surfaces must be clean and any paint well-cured, to ensure proper adhesion¬ to be glued with self-adhesive tape onto the stop section of the door frame¬ profile ends to be miter-cut or welded¬ do not use any aggressive material for cleaning
PS 810 TEKey features
Installation
Frame timber
Material TPE
Length 2100 m / coil
MOQ 200 m
Working temperature -40°C to + 180°C
Hardness 60 Shore A
Suitable for gap size 2 - 5 mm
Optimum gap size 3.5 mm
A B
C D
PS 810 TE
3.5
10
8
6
12
2 - 5
12
A B
C D
PS 810 TE
3.5
10
8
6
12
2 - 5
12
Article numbers and cross section drawings
PS 810 TE
white grey black
P160050 P160060 P160061
Technical data
113
Perimeter seals
¬ smoke protection ¬ stop-mounted compression seal ¬ self-adhesive backing ¬ easy installation
PS 812 TEKey features
¬ contact surfaces must be clean and any paint well-cured, to ensure proper adhesion¬ to be glued with self-adhesive tape onto the stop section of the door frame¬ profile ends to be miter-cut or welded¬ do not use any aggressive material for cleaning
Installation
Frame timber
Material TPE
Length 100 m/ coil
MOQ 100 m
Working temperature -40°C to +180°C
Hardness 60 Shore A
Suitable for gap size 2 - 5 mm
Optimum gap size 3.5 mm
A B
C D
PS 812 TE
15
3.5
6
12
10
15
2 - 5
A B
C D
PS 812 TE
15
3.5
6
12
10
15
2 - 5
Article numbers and cross section drawings
PS 812 TE
white brown black
P160062 P160063 P160064
Technical data
114
Finger protection for automatic doorsAutomatic doors must open and close in a safe manner (EN 16005) in order to ensure proper safety in use.Possible crushing and shearing zone hazards must be identified and eliminated. The closing edge at the hinged edge of the door must be safeguarded in compliance with the regional regulations and standards.
We recommend that existing automatic doors also be fitted with Athmer Finger Protection products.Please observe the provisions of the relevant reg-ulations and standards that apply in your country with regard to automatic doors.
Effective prevention against fingers becoming trappedbetween the door leaf and the frameAthmer finger protection systems have been preventing injuries for thirty years by effectively reducing the risk of fingers becoming accidentally trapped in doors.
Finger protection at doorsThe closing edges of doors invariably present a hazard. The requirements for different user groups and structural factors are governed by regional regulations and standards.
Finger protection in child daycare centres and schoolsChildren are scarcely aware of the dangers in their environment. Every day, children in-jure themselves unnecessarily in doors that are inadequately safeguarded or completely unprotected. In order to improve safety for our children, shearing zones between the door frame and the hinged edge of doors must be avoided. Several regulations in Euro-pean countries require safeguarded doors in child daycare centers. Our Athmer Finger Protection products offer the ideal solution.
ATHMER Finger Protection for different door applications
114
115
¬ Test certificates available upon request or online at:
www.athmer-fingerschutz.de/en
M A T E R I A L P R Ü F U N G S A M T N O R D R H E I N - W E S T F A L E N
DIESES PRÜFZERTIFIKAT UMFASST 1 SEITE UND 1 ANLAGE
Marsbruchstrasse 186 • 44287 Dortmund • Postfach: 44285 Dortmund • Telefon (0231) 4502 485 • Telefax (0231) 4502 586
PRÜFZERTIFIKAT Nr. 120004100
Aufgrund der in der anerkannten Prüfstelle für Baubeschläge des MPA NRW durchgeführten Prüfungen wird bestätigt, dass
die Bauprodukte Vorrichtungen zur Sicherung der Schließkanten an
Drehflügeltüren
„ATHMER FINGERSCHUTZ“ gemäß der Aufstellung, Anlage 1
der Firma Athmer oHG Sophienhammer D-59757 Arnsberg-Müschede
einer Dauerfunktionsprüfung mit: 1.000.000 Prüfzyklen unterzogen wurden und keinerlei Anlass zu Beanstandungen gaben.
Diese Bewertung basiert auf dem Prüfbericht Nr. 120004100.01 des MPA NRW.
Dortmund, den 20.12.2012 Im Auftrag
RBOAR Dipl.-Ing. H. Jansen Prüfstellenleiter
Athmer Finger Protectionfor the hinge side on the closing face
¬ Reliably covers the gap between
the door leaf and the door frame
¬ Maintenance free
¬ Easy to clean
¬ Supply package includes accessories
¬ Aluminium profiles
Tested quality
¬ Opening face protective profiles are suitable
for complete finger protection at the closing
edge
¬ Retrofittable
¬ Available in fixed and standard lengths
¬ Individual choice of colours
Finger protection for fire doorsIn general, Athmer finger protection systems are suitable for use with fire doors and smoke pro-tection doors. The regulations that apply in your country with regard to fire protection doors must be observed and complied with when fitting fin-ger protection systems.
Further information can be found at:www.athmer.com
©Bi
ld: M
ario
P. R
odrig
ues
Closing face
Opening face
Main closing edge
secondary closing edge
115
116
NR-25¬ Proven protective system
for decades
¬ Compact form
¬ Optional version for fitting to
glass doors
¬ Protective roller blind
automatically maintains constant tension
¬ Fire retardant synthetic fibre cover
Verified long-term reliability: 1,000,000
Travel length: 260 mm
260m
m
max. Auszugslänge
1840
25
40
25
6
18
25>
> 25
6
Profile colour
Fabric colour
black
C-31 RAL 9016
20
60
25 *
NR-25 Anwendung 1.pdf 1 25.03.13, 13 09:49
C-0
Further colours on request.
* Length supplied for standard doors in accordance with DIN 18101 with BR2000. For doors with BR2125, we recommend that you order a length of 2,050 mm.**Optional multi-use drill with Ø 3 mm, art. no. 5127
25 mm
2,500 mm
1,925 mm
2,015 mm
325 mm
Available
-
5823
5125
Technical data
Reduction indoor clearancewidth
Max. Lengths
Standard length*
Length forpower-operated doors
Minimum length
Fixed lengths
Can be shortened by
Standard accessories
Accessories for metal door frames**
+++1,000,000 test cycles -
measurable quality +++
max. travel length 260 m
m
Athmer Finger Protection
117
NR-26 w-proof¬ Protective roller blind
¬ Weatherproof
¬ Temperature range -20 to +50 °C
¬ Resistant to rain, snow,
frost, foliage, dirt and UV light
¬ Extremely compact and robust design
¬ Concealed screws on the blind side
¬ Flexible choice of colours
¬ Fire retardant synthetic fibre cover
Synthetic fibre
Verified long-term reliability 200,000
Travel length: 260 mm
25>
> 25
25
26
40 18
6
26
40
18
6
Profile colour
Fabric colour
anthracite
C-0 C-31 RAL 9016 RAL 3020
RAL 7030RAL 6005 RAL 7016 RAL 9006
* Length supplied for standard doors in accordance with DIN 18101 with BR2000. For doors with BR2125, we recommend that you order a length of 2,050 mm.**Optional multi-use drill with Ø 3 mm, art. no. 5127
26 mm
2,500 mm
1,925 mm
2,015 mm
325 mm
Available
-
5830
5831
Technical data
Reduction indoor clearancewidth
Max. Lengths
Standard length*
Length forpower-operated doors
Minimum length
Fixed lengths
Can be shortened by
Standard accessories
Accessories for timber frames**
Further colours on request.
mm
ax. Auszugslänge
XL ax. Auszugslänge2
320 mm
60m
m
max. travel length 260 m
m
XL max. travel length 320 m
m
Athmer Finger Protection
118
C-0
NA-7¬ Cover made of special plastic
¬ Particularly flat design
¬ Suitable for door leaf thicknesses up to
42 mm, a door opening limiter
can be used if required
Verified long-term reliability: 200,000
Travel length: 125 mm
max
. 42
mm
125m
m
max. Auszugslänge
Profile colour
Cover colour
Platinum grey RAL 7036
135
7 mm
2,500 mm
1,943 mm
None
Available
4
5940
5125
Technical data
Reduction inFrame clearancewidth
Maximum length
Standard length*
Minimum length
Fixed lengths
Can be shortened by
Standard accessories
Accessories for metal door frames**
max. travel length 260 m
m
Athmer Finger Protection
119
Product family Opening side protective profilesfor the hinge side of the opening face
¬ Opening face protective profiles safeguard the gap between the door leaf and the frame
reliably on the opening face.
¬ Suitable for retrofitting
¬ Maintenance free
¬ Aluminium profiles anodised or colour coated
¬ Suitable for outdoor use
¬ Fixed lengths available
¬ For all hinge diameters
¬ Available as a set for installation under, between and above the hinges
120
BOProtective profiles for doors
without rebate screw-on flap
hinges
¬Ø12 - 14 mm, Ø 21 - 23 mm
BUProtective profiles for
rebated doors
¬For timber frames
¯15 - 24mm hinge
BA-28Protective system BA-28 for surface-mounted hinges on metal doors
¬ Variable adjustment
¬ Standard colour: silver anodised C-0; individual colours available
¬ Concealed screw fixing
Technical data:
Suitable for pivotal points from 20-36 mm.Length supplied: 1,900 mm, can be shortened
4
42,2
22
30
2036
5034
22
42,2
4
Sets¬ Surface finish: Anodised aluminium or colour coated
¬ Also available as a set, comprising:
- Profile 1: below the lower hinge - Profile 2: between the hinges
- Profile 3 (optional): above the upper hinge
¬ No cutting required on site
¬ Easy to install
Sets for self cutting to size
¬ 2-part for safeguarding between and below the hinges
¬ 3-part for safeguarding between, above and below the hinges
¬ For doors from 2.11 m
Athmer Finger Protection
A B
C D
Athmer Fingerschutz BO-13
13Ø
3017
1,5
15
16
R7,5
C
M
Y
CM
MY
CY
CMY
K
5-201-1q.pdf 1 11.08.15 10:41
22Ø
10
31,5
1,5
2,5
21
21
R10
C
M
Y
CM
MY
CY
CMY
K
5-211-1q.pdf 1 11.08.15 10:41
23
24
R11
C
M
Y
CM
MY
CY
CMY
K
5-221-1q.pdf 1 11.08.15 10:41
BO-13
BU-16
BO-22
BU-20 BU-22
121
¬ Prevents hazards and damage caused by doors swinging back
¬ Adaptive damping protects the door leaf and frame
¬ Uniquely space-saving, design-oriented
¬ Easy to install
¬ For retrofitting to metal door frames
¬ Tripping hazards and unevenness are prevented
¬ Ideal for areas with stringent hygienic requirements, and where appearance matters
¬ Ideal for use in hotels, offices and doctors’ surgeries
¬ Excellent for floors with underfloor heating
No drilling necessary in the floor for door stops
The Porti® family For timber and glass doors
Porti® for timber doors Porti® for glass doorsDoor leaf width 720 - 1,110 mm Door leaf width 610 - 719 mm Hinge width 709 - 959 mm
Timber Metal frame Timber Metal frame Timber Metal frame
65 kg 65 kg 65 kg 65 kg 50 kg 50 kg
x x x
5489 5371 5465 5379 5487 5318
Frame
Weight of door leaf
For retrofitting
Article number
122
Up to 65 kg door leaf weight
¬ Retrofittable to metal door frames
¬ For door leaf widths of:
720 mm - 1,110 mm, art. no. 5371 610 mm - 719 mm, art. no. 5379
¬ Set-up possible on timber frames with a fixing element in the door frame (see next page)
¬ For door leaf widths of:
720 mm - 1,110 mm, art. no. 5489 610 mm - 719 mm, art. no. 5465
PORTI® for timber doors¬ Maximum door leaf weight up to 65 kg
¬ Particularly thin lever of only 2 mm
¬ Restrictor plate 15.8 x 12 mm
¬ Upper door frame gap 4 - 10 mm
¬ Endurance tested
on the basis of DIN EN 13126-5
Meets class 4
¬ Door opening angle max. 120°
¬ The choice of hinge should take account of
the load exerted by the door opening
restrictor
Technical data
Application
Athmer Finger Protection
635
A B
C D
Athmer Porti 310
12
525
310
16
Ø123,
5
635
A B
C D
Athmer Porti 310
12
525
310
16
Ø12
3,5
123
Technical data
Up to 50 kg door leaf weight
¬ Retrofittable to metal door frames
¬ For door leaf widths of:
709 mm - 959 mm, art. no. 5318
¬ Set-up possible timber frames with
fixing element
¬ For door leaf widths of:
709 mm - 959 mm, art. no. 5487
PORTI® for glass doors¬ Maximum door leaf weight up to 50 kg
¬ Silver-coloured, anodised
¬ Slide plate bonded to
glass door leaf
¬ Upper door frame gap 4 - 10 mm
¬ Particularly thin lever of only 2 mm
¬ Restrictor plate 16.8 x 12.2 mm
¬ Endurance tested
on the basis of DIN EN 13126-5
Meets class 4
¬ Door opening angle max. 120°
¬ The use of sandblasted
glass doors is not recommended
¬ Suitable for doors made of 8 / 10 /12 mm
ESG and also for LSG made from ESG
¬ 10 mm ESG recommended with Office
hinges and adjustable hinge retainer
A B
C D
Athmer Porti für Glastüren
400
Ø13
17
957
A B
C D
Athmer Porti für Glastüren
400
Ø13
17
957
Application
Southeast AsiaSingaporeT. +65 9838 [email protected]
Hong Kong & Macao SARsHong KongT. +852 9317 [email protected]
China MainlandShanghaiT.: +86 532 8098 [email protected]
South AsiaMumbaiT. +91 9962 5072 [email protected]
athmer.com
Athmer oHGSophienhammer59757 Arnsberg-MüschedeGermany
T +49 2932 477-500F +49 2932 477-100
Ath
mer
| 2
| 415
3 | 0
2/20
19 |
FM
The right to make technical changes is reserved Athmer oHG | Last updated 18.09.2019