PRODUCT BROCHURE PUMPS SERFILCO INTERNATIONAL
P R O D U C T B R O C H U R E
P U M P S
SERFILCO
INTERNATIONAL
I n t r o d u c t i o n
SERFILCO: Pump industry leader
worldwide for over 50 years.
It has been said that the success of any
business comes from finding a need and
fulfilling it. In 1961, our founder, Jack Berg,
saw a need in the surface finishing industry
for better filtration to improve plating quality
and reduce rejects. Armed with only the
experience gained as a manufacturer’s
representative selling filters to platers and a
desire to be in business for himself, he took
the plunge and opened a small storefront
business selling pumps, filter chambers and
filter cartridges.
From that humble beginning, SERFILCO
has grown to become a multi-national
manufacturer of a wide range of filtration
and liquid handling products serving many
industries. With five plants in North America
as well as operations in England, France
and Germany, plus a worldwide network of
sales representatives, we are strategically
positioned to supply the needs of
our customers.
Over the past four decades, we’ve seen
many changes in the field of metal finishing
and process industries. As these changes
were taking place, equipment was also
changing. Newer and better designs, along
with a broader array of chemically resistant
materials are being used to provide the
tools needed to operate more effectively
and efficiently, as well as with greater safety
for workers and the environment.
SERFILCO Pumps, Filters, Chambers
and Filtration Systems takes pride in its
role in bringing many of these advances
to the marketplace. Magnetically coupled
pumps, vertical pumps, externally mounted
single and double mechanical seal pumps,
all-plastic filtration systems, and pumped
agitation systems using eductors to agitate
process and cleaning solutions all can be
tracked back to the foresight, ingenuity and
perseverance of SERFILCO people.
For us, the end of the last millennium was
a learning period during which time we
accumulated a generation of experience in
meeting needs and solving problems with
products that are the benchmark of
the industry.
Today, at the start of the new millennium,
we are looking forward to the future with
the expectation that we will continue to be
a technical resource, contributing to the
growth and satisfaction of our customers
and their needs including our Serfilco
Pumps, Filter Chambers, Filtration Systems,
Filtration Media, Pump Accessories and
Replacement Parts for Pumps.
C o n t e n t s
0 1 MagnETIC COUPlED PUMPS 01-1 Introduction to Magnetic Coupled Pumps
01-2 Series 'A & B' Magnetic Coupled Pumps
01-4 Series 'DSS' Stainless Steel Magnetic Drive Pumps
01-6 Series 'ST' Magnetic Coupled Pumps
0 2 HORIzOnTal SEalED PUMPS 02-1 Introduction to Horizontal Sealed Pumps
02-2 Series 'HA' Horizontal Centrifugal Pumps
02-4 Series 'HE' Horizontal Pumps
02-6 Series 'HF' Horizontal Centrifugal Pumps
02-8 Series 'HH' Horizontal Centrifugal Pumps
0 3 SElf-PRIMIng PUMPS 03-1 Introduction to Self-Priming Pumps
03-2 Series 'G' Self-Priming Centrifugal Pumps
03-4 Series 'I' Self-Priming Centrifugal Pumps
03-6 Series 'S' Self-Priming Centrifugal Pumps
03-8 Series 'T' Self-Priming Centrifugal Pumps
0 4 VERTICal PUMPS 04-1 Introduction to Vertical Pumps
04-2 Series 'E' Stainless Steel Vertical Pumps
04-4 Series 'EF' Vertical Pumps
04-6 Series 'EO' Vertical Pumps
04-8 Series 'EO¾' Vertical Sump Pumps
04-10 Series 'HB' Vertical Sump Pumps
0 5 OTHER PUMPS 05-1 Introduction to Other Pumps
05-2 Series 'AOD' air Operated Diaphragm Pumps
Ma
gn
et
ic
co
up
le
d p
uM
ps
0 1 - 1
I n t r o d u c t i o n t o H o r i z o n t a l S e a l e d P u m p s
Serfilco Magnetic Drive Pumps eliminate
the need for a drive seal and so the risk of
leakage is completely eradicated. Using
Serfilco magnetic drive pumps means that
hazardous liquids can be pumped without
spillages.
0 1 - 2
SERIES ‘A & B’ MagnETIC COUPlED PUMPS
Flows to 45lpm or ■5m head at 50Hz
Non-metallic solution contact: ■Polypropylene □CPVC □PVDF □ECTFE □EPDM or Viton □ ®
Low Maintenance: ■No spindles □No bearings □No thrust washers □
Continuous duty design ■Quiet ■Economical ■Centrifugal ■Suitable for SG up to 1.2 ■Trimmed impellers available ■for SG’s above 1.2
LEAK PROOF ▪ NON METALLIC DESIGN FOR PUMPING
AQUEOUS ▪ CAUSTIC ▪ ACID RINSE ▪ CLEANING ▪ PLATING
ETCH ▪ ELECTRONICS
Refer to Serfilco bulletin ■ P-503 for full technical details
Contact Serfilco sales for more ■information, quoting ‘AB’ series
SERIES ‘A & B’
a Pump 69mm Impeller
B Pump 73mm Impeller
HEA
D (m
)
0
1
2
3
4
5
0 5 10 15 20 25 30 35 40 45 50
LPM
0 1 - 3
Dimensions, Motor Power and Specifications
SERIES ‘A'
SERIES ‘B'
Series A1/12 115/1/50-60 ■1/15 240/1/50-60 ■5 ■ ⁄8” Hose ConnectionCPVC with ECTFE encapsulated ■impeller and EPDM O-ringPP with, PP impeller and EPDM O-ring ■ECTFE with ECTFE encapsulated ■impeller and EPDM O-ringPVDF with ECTFE encapsulated ■impeller and Viton O-ring
Series A1/6 Hp ■115-230/1/50-60, 230-380/3/50 ■3 ■ ⁄4” Hose ConnectionCPVC with ECTFE encapsulated ■impeller and EPDM O-ringPP with, PP impeller and EPDM O-ring ■ECTFE with ECTFE encapsulated ■impeller and EPDM O-ringPVDF with ECTFE encapsulated ■impeller and Viton O-ring
207 40
86 21 8mm HOLES
2 OFF
73
31
57
113
98
57
358
43 139
33
100
159
67
89 7mm SLOT4 PLACES
0 1 - 4
SERIES ‘DSS’ STaInlESS STEEl MagnETIC DRIVE PUMP
Flows to 350lp or 19m head ■Corrosion Resistant Materials: ■
316ss □EPDM or Viton □ ®
Carbon □PTFE □Hastelloy C Shaft □
Other materials available ■on request
Max. Temperature 120ºC ■Threaded connections as ■standard, with Flanged options on request
ATEX and Explosion ■proof available
Powerful rare-earth ■magnet coupling
Ex-stock availability ■
RELIABLE AND TROUBLE FREE SEALLESS AND “LEAK-
PROOF” PUMPING FOR TOTAL SOLUTION CONTAINMENT FOR USE ON CORROSIVE LIQUIDS
Refer to Serfilco bulletin ■ P-507 for full technical details
Contact Serfilco sales for more ■information, quoting ‘DSS’ series
SERIES ‘DSS’
HEA
D (m
)
LPM
0
5
10
15
20
25
0
25
50
75
10
0
12
5
15
0
17
5
20
0
22
5
25
0
27
5
30
0
32
5
35
0
37
5
2
3
1
0 1 - 5
Dimensions, Motor Power and Specifications
Flow Curve Model NumberMotor (2850 RPM)
HP (kW) Voltage
1DSS1x3⁄4-MSSK-CM.5DSS1x3⁄4-MSSK-DM.5
.5 (.37)220-240/1/50
220-380-415/3/50
2DSS11⁄2x1-MSSK-CM1DSS11⁄2x1-MSSK-DM1
1 (.75)220-240/1/50
220-380-415/3/50
3 DSS11⁄2x11⁄4-MSSK-DM2 2 (1.5 220-380-415/3/50
Pump model A B C D E F G H I
01-4420-03 1" FBSP 3⁄4" MBSP 44 98 57 194 160 10 176
01-4421-03 1-1⁄2" FBSP 1" MBSP 44 98 69 211 200 20 200
01-4422-03-A 2" MBSP 1-1⁄2" MBSP 66 135 80 257 200 10 230
Motor dimensions may alter with manufacturer.
Typical applications include; waste treatment, filter systems, mixing and transfer ■pumping and recirculation – filtering, circulation, processing and transferSeal-less – providing maintenance free and leak proof operation ■The broad range of construction materials allows for a variety of applications and service ■with most corrosive solutionsThe impeller is designed to deliver the maximum flow and pressure utilizing the available ■strength of the synchronized magnets
C
D
G
A E
H
F I
B
0 1 - 6
SERIES ‘ST’ MagnETIC COUPlED PUMPS
Flows to 850lpm 32m head ■Non-metallic solution contact: ■
Polypropylene □PVDF □EPDM or Vition □ ® elastomersGraflon bearings □Ceramic Spindle □
Chemical Duty Motor with ■oversize bearings, 2-part epoxy finish and a powerful rare earth magnet coupling allow pumping of solutions up to 1.2SG
Ex-Stock availability ■Limited run-dry capability ■
RELIABLE AND TROUBLE FREE SEALLESS AND
"LEAK-PROOF" PUMPING FOR TOTAL SOLUTION
CONTAINMENT FOR USE ON AQUEOUS ▪ ACIDS ▪ ALKALI ▪ PLATING ▪ ELECTRONICS ▪ ETCHING ▪ WASTE ▪ RINSES
Refer to Serfilco bulletin ■ P-517 for full technical details
Contact Serfilco sales for more ■information, quoting ‘ST’ series
SERIES ‘ST1-ST2’
0
1
2
3
4
5
6
0 5 10 15 20 25
HEA
D (m
)
LPM
1
2
SERIES ‘ST6-ST9’
0
5
10
15
20
25
30
35
40
0
10
0
20
0
30
0
40
0
50
0
60
0
70
0
80
0
HEA
D (m
)
6
6H
7
8
9
SERIES ‘ST3-5H’
0
2
4
6
8
10
0
20
40
60
80
10
0
12
0
14
0
16
0
HEA
D (m
)
LPM LPM
3
4
5
5H
0 1 - 7
Dimensions, Motor Power and Specifications
PP ModelsPump Casing & Impeller – PP/PPS ■Spindle - Ceramic ■O-Ring - EPDM ■Bearing - Graflon ■
PVDF ModelsPump Casing & Impeller - PVDF/PPS ■Spindle - Ceramic ■O-Ring - Viton ■Bearing - Graflon ■
L
J
I
G
K
C
A
B
F
E D
K
DIMENSIONS Power (Kw)MODEL A B C D E F G H I J K L
ST1 1⁄4" BSP 1⁄4" BSP 28 60 39 150 19 89 50 39 104 112 0.0135
ST2 1⁄2" BSP 3⁄8" BSP 28 58 39 166 30 100 60 40 104 112 0.024
ST3 1⁄2" BSP 1⁄2" BSP 43 132 19 220 30 125 65 60 89 102 0.08
ST4 1⁄2" BSP 1⁄2" BSP 43 136 71 270 30 120 65 58 90 110 0.12
ST5 1-1⁄4" BSP 3⁄4" BSP 60 190 80 306 37 141 78 63 100 128 0.33
ST5H 1-1⁄4" BSP 3⁄4" BSP 60 190 80 306 37 141 78 63 100 128 0.33
ST6 1-1⁄2" BSP 1" BSP 66 240 90 371 40 171 100 71 112 138 0.75
ST6H 2" BSP 1-1⁄4" BSP 90 314 100 473 60 211 131 80 125 168 1.5
ST7 2" BSP 1-1⁄4" BSP 90 320 100 489 60 221 131 90 140 178 2.0
ST8 2" BSP 1-1⁄4" BSP 90 320 125 511 60 221 131 90 140 178 3.0
ST9 2-1⁄2" FLANGE 2" FLANGE 91 347 140 575 75 269 157 112 190 224 5.5
Ho
riz
on
ta
l s
ea
le
d p
uM
ps
0 2 - 1
I n t r o d u c t i o n t o H o r i z o n t a l S e a l e d P u m p s
Serfilco is a leading manufacturer of high
performance centrifugal pumps molded from
tough modern thermoplastics for handling
corrosive liquids. Our range of horizontal,
close or long-coupled, single or double
seal pumps have been designed for a wide
range of chemical duty applications and offer
unrivalled scope of performance.
0 2 - 2
SERIES ‘HA’ HORIzOnTal CEnRTIfUgal PUMP
Flows to3784l/min ■or 24m head at 50Hz
Excellent chemical resistance: ■Pumps are machined □from solid CPVC
Single or Double Mechanical ■seal options:
SiC/SiC □Carbon Ceramic □EPDM or Viton □ ® Elastomers
Titanium or Hastelloy C shafts ■ANSI Flanged Conections ■Close Coupled ■or Long Coupled
Chemical Duty Motor ■with oversize bearings, liquid vapour seal, 2-part epoxy finish
Seal Flush kits available ■
ANSI DIMENSIONAL, HEAVY DUTY CONSTRUCTION
Refer to Serfilco bulletin ■ P-207 for full technical details
Contact Serfilco sales for more ■information, quoting ‘HE’ series
SERIES ‘HA’ MODEl 4 x 3 x 10
SERIES ‘HA’ MODEl 6 x 4 x 10
HEA
D (m
)
HEA
D (m
)
LPM LPM
0
5
10
15
20
25
30
0 400 800 1200 1600 2000 0
4
8
12
16
20
0 473 946 1419 1892 2365 2838 3311
6 7 8 9 10 11 12
0 2 - 3
Dimensions, Motor Power and Specifications
Model 4 x 3 x 8 4 x 3 x 10 6 x 4 x 10
Motor Frame
213TC 215TC 254TC 215TC 254TC 256TC 254TC 256TC 284TC 286TC
HP 7.5 10.0 15.0 10.0 15.0 20.0 15.0 20.0 25.0 30.0
A 119⁄16 (294) 119⁄16 (254) 1111⁄16 (297)
B 4 (102) 4 (102) 4 (102)
C 81⁄4 (210) 81⁄4 (210) 10 (254)
D 11 (279) 11 (279) 131⁄2 (343)
E 7.3 (185) 9.6 (244) 7.3 (185) 9.6 (244) 9.6 (244) 13.1 (333)
F&N 15.5 (394) 15.5 (394) 17.0 (432)
G* 15.5 (394) 16.6 (422) 17.8 (452) 16.6 (422) 17.8 (452) 20.0 (508) 17.8 (452) 20.0 (508) 21.6 (549)
H* 10.3 (262) 12.0 (305) 10.3 (262) 12.0 (305) 12.0 (305) 14.0 (356)
J 8.5 (216) 10.0 (254) 8.5 (216) 10.0 (254) 10.0 (254) 11.0 (279)
K 5.5 (140) 7.0 (178) 8.3 (211) 7.0 (178) 8.3 (211) 10.0 (254) 8.3 (211) 10.0 (254) 9.5 (241) 11.0 (279)
L 3.5 (89) 4.3 (109) 3.5 (89) 4.3 (109) 4.3 (109) 4.8 (121)
M 5.3 (135) 6.3 (160) 5.3 (135) 6.3 (160) 6.3 (160) 7.0 (178)
Single or double mechanical seals ■Long coupled and close coupled ■availableCPVC pump body, titanium shafts ■(Hastelloy C shafts available) with viton or EPDM elastomers and stainless steel external hardware
Enclosed impeller ■Typical applications include: ■petrochemical, fume scrubbing cooling tower, waste treatment and filter systemsHigh flow rates, chemical resistance and ■durability make it the ideal ‘work horse’
0 2 - 4
SERIES ‘HE’ HORIzOnTal PUMP
500LPM or 30m head ■Non-metallic solution contact ■PPP, CPVC, PVDF, ECTFT-T ■Single or Double Mechanical ■Seal (carbon/ceramic or sic/sic w/viton or EPDM)
Centrifugal ■- quiet, vibration free
Metric Connections ■or NPT available
Pump casing indexes to six ■directions of discharge
Chemical Duty Motor with ■oversize bearings, liquid vapour seal, 2-part epoxy finish and x1.15 service factor
Dry Stop Protection available ■60hz operation possible ■
ENERGY SAVING CENTRIFUGAL PUMPS FOR ACID ▪ AQUEOUS
CAUSTIC ▪ CHEMICAL ETCHING ▪ PLATING
SCRUBBING ▪ EFFLUENT WATER APPLICATIONS
Refer to Serfilco bulletin ■ P-201S for full technical details
Contact Serfilco sales for more ■information, quoting ‘HE’ series
SERIES ‘HE’
2
3
4
5
6
1
HEA
D (m
)
LPM
0
5
10
15
20
25
30
35
0 100 200 300 400 500
0 2 - 5
Dimensions, Motor Power and Specifications
Pump Body – CPVC, Polypropylene, ■PVDF or ECTFEElastomers – EPDM or Viton ■Enclosed Impellers ■Option of Single or Double Mechanical ■Seal – Both available in either EPDM or Viton
Optional Flange connections (ANSI or ■ASA) – CPVC, PVDF, PPOptional Stainless Steel Shaft ■Both 50Hz and 60Hz motors available ■
E
67
251
C
A
H
D
2" NPT OR BSP
B
146
70
F
G
1-1/2" NPT OR BSP
DIMENSIONS (mm)
MOTOR KW
1.5 2.2 3 4
A 157 157 177 196
B 90 90 100 112
C 476 476 522 549
D 100 100 140 140
E 130 130 175 180
F 178 178 192 224
G 140 140 160 190
H 292 292 297 301
Motor dimensions may alter with manufacturer.
0 2 - 6
SERIES ‘HF’ HORIzOnTal CEnTRIfUgal PUMP
Flows to 1200lpm ■or 40m head at 50hz
Non-metallic solution contact: ■ High-temperature □polypropyleneCPVC □
Single or Double ■mechanical seals:
Carbon / Ceramic □Silicon Carbide □EPDM or Viton □ ® elastomers
Long-Coupling kits available ■ANSI Dimensional, BSP ■or NPT with optional flanged connections
Chemical Duty Motor with ■2 part epoxy finish and stainless steel shaft
HIGH FLOW, HIGH TDH ANSI DIMENSIONAL HIGH EFFICIENCY ▪
LOW ENERGY USAGE
Refer to Serfilco bulletin ■ P-208 for full technical details
Contact Serfilco sales for more ■information, quoting ‘HF’ series
SERIES ‘HF’
2
3
4
5 (1450rpm)
1
HEA
D (m
)
LPM
0
5
10
15
20
25
30
35
40
45
0 150 300 450 600 750 900 1050 1200
0 2 - 7
Dimensions, Motor Power and Specifications
Pump body – CPVC or Polypropylene ■Single or double mechanical seal ■available in either EPDM or Viton Silicon CarbideOptional ANSI Flange connections ■available
Trimmed impeller to meet specified flow ■availableTypical Applications include; - ■Petrochemical, Fume Scrubbing/Cooling Tower, Waste Treatment/Process Water and Filter Systems
KWFrame
size
DIMENSIONS (mm)
A B C D E F
4 112 319 201 140 89 112 190
5.5 132 385 201 140 89 132 216
7.5 132 385 201 140 89 132 216
11 132 465 265 140 89 132 216
Motor dimensions may alter with manufacturer.
F
177
330 DIA
2" MNPT
210
70
234
DC
A
E
B
158
3" FNPT
0 2 - 8
SERIES ‘HH’ HORIzOnTal CEnTRIfUgal PUMP
Flows to 220lp or 33m head ■at 50hz
Non-metallic solution contact: ■CPVC - 60ºC □PVDF - 93ºC □
Sleeved Impelleer ■Non-metallic Single ■Mechanical Seal:
Carbon / Ceramic with EPDM □or Viton® elastomers
Connections 1" MNPT inlet x ■ 3⁄4" MNPT outlet
Maximum solids handling ■capability 3.8mm
Optional pedestal mounting ■for long coupling
Standard NEMA 56C TEFC ■motors, for explosion proof or other motor options please consult the sales office
SERIES ‘HH’
2
3
4
5
1
HEA
D (m
)
LPM
0
5
10
15
20
25
30
35
0 25 50 75 100 125 150 175 200 225 250
HIGH DISCHARGE HEAD PERFORMANCE FOR
TRANSFER PUMPING AND RECIRCULATION OF D.I. WATER PLATING ▪ ETCHING ▪ ELECTRONICS
WATER TREATMENT ▪ ACIDS
Refer to Serfilco bulletin ■ P-206 for full technical details
Contact your local Serfilco sales ■office and quote ‘HH’ series
0 2 - 9
Dimensions, Motor Power and Specifications
Pump body – CPVC or PVDF ■Choice of EPDM or Viton elastomers ■A choice of five impeller diameters provides a full range of flow and head performance ■with efficient use of motor horsepowerDRI-STOP® pump protector is available to prevent damage to pump due to dry ■operationMotors are standard NEMA, TEFC (Explosion proof motors available) ■
Typical Applications:Fume scrubbing ■Cleaning and de-scaling ■Water treatment ■Solution transfer with priming ■chamber
HORSE-POWERDIMENSION A
A
1⁄2 222
3⁄4 235
1 248
1-1⁄2 267
2 282
3 314
78
111
116
214
256
DISCHARGE,3/4" NPT65
135 A
SUCTION,1" NPT
183
114155
119 86
se
lf
-pr
iMin
g
p
uM
ps
0 3 - 1
I n t r o d u c t i o n t o H o r i z o n t a l S e l f P r i m i n g P u m p s
Serfilco's self-prime pumps are able to
handle low and negative suction conditions
and pump dirty and aggressive solutions.
Successful adaptation of these products for
industrial, agricultural, oilfield, marine and
construction applications has resulted in
worldwide market acceptance.
0 3 - 2
SERIES ‘G’ SElf-PRIMIng CEnTRIfUgal PUMP
Flows to 315lpm or 15m head ■at 50Hz
Chemical resistant materials of ■construction as standard:
Noryl □ ®
Ryton □ ®
316ss internal hardware □Non-metallic solution contact ■available on request
Will reprime to 4m ■(based on water at 21°C)
2” x 1 ■ 1⁄2” Threaded Connections
TEFC Chemical duty motors fitted ■as standard
SELF-PRIMING CENTRIFUGAL PUMPS FOR TRANSFER AND RECIRCULATION
Refer to Serfilco bulletin ■ P-613 for full technical details
Contact your local Serfilco sales ■office and quote ‘G’ series
SERIES ‘G’
HEA
D (m
)
LPM
0 2 4 6 8
10 12 14 16 18
0
25
50
75
10
0
12
5
15
0
17
5
20
0
22
5
25
0
27
5
30
0
32
5
B
C
D
E
a
0 3 - 3
Dimensions, Motor Power and Specifications
Either single phase motors (115-230v/1/50-60) or three phase motors (230-460v/3/50- ■60) are availableFeatures an open non-clogging impeller ■Basket type strainer available in either ECTFE or PP protects the pump ■The large cover makes initial priming and strainer removal quick and easy ■A PP base plate is included wit close-coupled electric drive pumps ■
Pump is constructed of either Noryl ■or Ryton
It is available with either 316 Stainless ■steel internal hardware or completely non-metallic solution contact
Typical Applications:Recirculation of cooling towers and ■mixing vats
Filtration ■Lifting from ponds, tanks, sumps and ■pits
Emergency standby ■
261
348
0.75KW, 2371.5KW, 3212.0KW, 321
SUCTION, 2" MALE &1-1/2" FEMALE
DISCHARGE,2" MALE & 1-1/2" FEMALE
184
220
281
110
100
65 378
8
0 3 - 4
SERIES ‘I’ SElf-PRIMIng CEnTRIfUgal PUMP
Flows to 650lpm or 23m TDH ■with engine drive
Corrosion resistant materials ■of construction:
Stainless Steel casing □and fastenersFibreglass reinforced PE, □PP or Ryton® internalsEPDM or Viton □ ® elastomers
Suction lift to 6m (based on water ■and after initial priming)
1 ■ 1⁄2" & 2" connections BSP / NPT
Close coupled, long coupled ■or pedestal mounted
Petrol Engine, Electric Motor, ■hydraulic or pneumatic drive
Built in check-valve ■
EFFICIENT, LIGHTWEIGHT AND CHEMICALLY RESISTANT
FOR USE ON CHEMICALS ▪ WASTES ▪ ACIDS ▪ INDUSTRIAL
LIQUIDS ▪ AGRICULTURE ▪ AQUACULTURE
Refer to Serfilco bulletin ■ P-631 for full technical details
Contact your local Serfilco sales ■office and quote ‘I’ series
SERIES ‘I’
HEA
D (m
)
LPM
0
5
10
15
20
25
0 100 200 300 400 500 600 700 800
Electric 2850
Petrol
0 3 - 5
Dimensions, Motor Power and Specifications
PUMP with GASOLINE ENGINE DRIVE
Port Size Max. Flow rate Max. tDH
iN GPM lPM Ft. m
11⁄2 /2 170 650 75 23
316 stainless steel housing, ■polypropylene internal parts 316 stainless steel housing clamp, stainless steel internal fasteners and EPDM elastomers
Pump mounted on base rails with ■carrying handle
Engine shaft shielded with heat shrink ■polyethylene tubing
Built in check valve and double flush ■volute
CLOSE COUPLED PUMP with ELECTRIC, HYDRALIC OR PNEUMATIC DRIVE:
Port Size
Max. Flow rate
Max. tDHHP/rPM
iN GPM lPM Ft. m
TEFC 11⁄2 /2 170 530 72 16 3/3450
Hydraulic 11⁄2 /2 170 650 72 22 3/3450
Pneumatic 11⁄2 /2 140 530 50 15 1.7/2900
316 Stainless steel housing, PP ■internal parts and fasteners, 316 SS housing clamp
Optional Viton elastomers ■Includes PP base plate on electric ■models/ Steel base plate on hydraulic and pneumatic models
Pedestal mounted available ■Built in check valve and double flush ■volute
0 3 - 6
SERIES ‘S’ SElf-PRIMIng CEnTRIfUgal PUMP
Flows to 845lpm or 25m head ■at 50hz operation
Choice of corrosion ■resistant materials:
Glass Reinforced Polyester □(GRP)Polypropylene □Ryton □ ®
316ss Internal hardware □Non-metallic solution contact ■models are available
Will re-prime to 7m ■Close coupled with ■various options:
Electric Motor □Petrol Engine □Hydraulic Drive □Pneumatic Drive □
Also available as long-coupled ■pedestal mounted pump
Built in check-valve ■BSP and NPT threads available ■
SELF-PRIMING CENTRIFUGAL PUMPS FOR TRANSFER AND RECIRCULATION
Refer to Serfilco bulletin ■ P-630 for full technical details
Contact your local Serfilco sales ■office and quote ‘S’ series
SERIES ‘S’
HEA
D (m
)
LPM
0
5
10
15
20
25
30
0
100
200
300
400
500
600
700
800
C I
E J
f l
a H
0 3 - 7
Glass reinforced polyester with 316 stainless steel internal fasteners and 304 SS external ■fastenersViton, Buna or EPDM elastomers available ■Polypropylene base plate ■Choice of port size and impeller ■Typical applications include waste treatment, chemical/solution transfer and emergency/ ■back-up pumpAll pumps include a built in check valve and a self cleaning volute ■
1 1⁄2” & 2” Pumps to 3.0 HP (3 Phase)
2” & 3” Pumps 5.0 HP (3 Phase)
Dimensions, Motor Power and Specifications
569 219
201 3KW183 2.2KW
48
299 3KW274 2.2KW
SUCTION, 2" FEMALE BSP
DISCHARGE, 2" FEMALE BSP
132
1
91
126
0 3 - 8
SERIES ‘T’ SElf-PRIMIng CEnTRIfUgal PUMP
Flows to 1198lpm or head ■8.6mTDH (electric driven at 50Hz)
Flows to 1360lpm or head 25.3m ■TDH (petrol engine driven)
Corrosion resistant materials ■of construction:
Rugged Glass Re-enforced □Polyester casingBuna-N elastomers □Stainless Steel fasteners □
Suction lift 7m ■2" & 3" threaded connections ■Close coupled (Petrol engine) ■Long coupled (electric motor) ■Pedestal mounted for ■flexible coupling
Built in check-valve ■
HORIZONTAL ▪ LONG OR CLOSE COUPLED FOR
WATER AND SALT WATER APPLICATIONS
Refer to Serfilco bulletin ■ P-632 for full technical details
Contact your local Serfilco sales ■office and quote ‘T’ series
SERIES ‘T’
HEA
D (m
)
LPM
0 2 4 6 8
10 12 14 16 18 20
0 200 400 600 800 1000 1200
D
K
M
B
0 3 - 9
Ideal for general service on water, ■salt water and mildly corrosive liquids containing solidsWill pass a solid 1/3 of the diameter of ■the suction portTough non-metallic impeller, 316 ■stainless steel internal fasteners and 304 stainless steel quick release housing clamp
Glass reinforced polyester housing ■Buna-N O-Rings and Gasket ■Built in check valve and self clearing ■voluteEngine driven pumps include heavy duty ■engine with dual element air cleaner, threaded pipe fittings, suction strainer, carrying handle and spring mounted base rails
Dimensions, Motor Power and Specifications
Dimensions
Suction Discharge A B C D E F G H K L M N O P
TE2 2"NPT 2"NPT 225 290 308 338 11 330 352 325 200 180 497 350 132 67
TE3 3"NPT 3"NPT 360 290 308 338 11 330 360 328 200 180 580 350 132 67
FLOW CURVE
PORT SIZE
MAX. FLOW 3800 RPM
MAX. TDH 3800 RPM
SHIP. WT MODEL
Number
GASOLINE ENGINEPEDESTAL
(CAST IRON)
IN. GPM LPM FT. m LBSHORSEPOWER
REQUIRED / RPMMODEL PCN
B 2 120 450 28 8.5 65 TE2BBB .61 / 3450 -CSS P
D 3 180 680 23 7.0 76 TE3DBB .9 / 3450 -CTSS P3
K 2 240 900 88 26.8 65 TE2KBB 4.0 / 3450 -CSS P
M 3 380 1440 73 22.3 76 TE3MBB 6.0 / 3450 -CTSS P3
Ve
rt
ica
l
pu
Mp
s
0 4 - 1
I n t r o d u c t i o n t o Ve r i t c a l P u m p s
Serfilco's range of vertical sealess and
bearingless pumps provide outstanding flow
and head characteristics along with excellent
chemical compatibility giving rugged, reliable
and cost effective performance.
0 4 - 2
SERIES ‘E’ STaInlESS STEEl VERTICal PUMP
Flow rates to 550 l/min at 50Hz ■Pressures to 3 bar / 28m ■Constructed from wrought and ■cast 316L Stainless Steel
Shaft vapour seal protects ■motor bearing and atmosphere
Run dry continuously with out ■failure as there are no bearings or seals
Install in or out of tank ■50Hz Metric IP55 Cast ■Iron Motors with oversized front bearings
Flange connections ■PTFE encapsulated ■EPDM gaskets
HIGH EFFICIENCY AND LOW ENERGY USAGE FOR HOT CORROSIVE CHEMICALS, ARDROX FORMULATIONS,
CLEANERS, CAUSTICS AND PERMANGANATES
Refer to Serfilco bulletin ■ P-630 for full technical details
Contact your local Serfilco sales ■office and quote ‘E’ series
SERIES ‘E’
HEA
D (m
)
LPM
0
5
10
15
20
25
30
35
0
50
10
0
15
0
20
0
25
0
30
0
35
0
40
0
45
0
50
0
55
0
60
0
65
0
70
0
E03/ 4SS
E01SS
E01SS
0 4 - 3
High efficiency semi-open impeller ■Optional heavy duty mounting plate ■Must be used inside the tank ■Available in 50hz or 60hz (230/460/3/50-60) ■Typical applications include fume scrubbing sump draining, chemical pumps, ■transferring printed circuit board wet processing or for cleaning solutions
Available in 316 Stainless Steel or Cast Iron ■
Dimensions, Motor Power and Specifications
MODEL HPsuc. DISCH. DIMENSIONS Inches WEIGHT
NPT (ln.) A B C D E F Lbs.(kg.)
ESS1
3⁄41
1-1⁄22
1-1⁄4 1
6-1⁄86-1⁄87-1⁄47-1⁄4
9-1⁄49-3⁄410-1⁄211-1⁄8
13203244
2-3⁄4 3-1⁄2 6-5⁄8
59 (27)63 (28)69 (31)85 (39)
ESS1 1/2
11-1⁄2
235
2 1-1⁄2
6-1⁄87-1⁄47-1⁄47-1⁄48-1⁄2
9-3⁄410-1⁄211-1⁄812-3⁄813-5⁄8
13203244
3-1⁄8 3-3⁄4 7-7⁄8
63 (28)80 (36)85 (38)88 (40)
0 4 - 4
SERIES ‘EF’ VERTICal PUMP
Flows to 1200lpm or 41m head ■at 50hz
Non-metallic solution contact: ■CPVC □PPP □
Viton or EPDM Elastomers ■Pump has no bearings and can ■run dry indefinitely
Chemical Duty Motor with ■2 part epoxy finish and stainless steel shaft
Heavy duty PTFE Shaft Vapour ■seal protects motor bearings
Centrifugal ■- quiet and vibration free
In or out of solution installation ■Will replace most OEM pumps ■Choice of 355mm ■or 432mm column
BSP or NPT ■Connections available
Optional Discharge Pipework ■
HIGH FLOW & HIGH TDH WITH HIGH EFFICIENCY AND LOW
ENERGY USAGE
Refer to Serfilco bulletin ■ P-316B for full technical details
Contact your local Serfilco sales ■office and quote ‘EF’ series
SERIES ‘EF’
HEA
D (m
)
LPM
0
5
10
15
20
25
30
35
40
45
150 300 450 600 750 900 1050 1200
Ef2
Ef3
Ef4
Ef5
Ef1
0 4 - 5
Pump Body – CPVC or PP ■Pump Column – CPVC or PP ■Impeller and Sleeve assembly - CPVC or PP ■Elastomers – EPDM or Viton ■Mounting Plate – CPVC or PP ■Optional Titanium Shaft ■Optional Discharge Pipework – CPVC or PP ■Optional Strainer – PP ■Optional Suction Extension – CPVC or PP 300mm to 900mm ■Optional Motors ■
4kw to 11kw - ■220/380/440-3-50 @ 2850rpm 220/380/440-3-50 @ 1450rpm
60Hz optional (see bulletin for 60hz curve) ■208-230/460-3-60 @ 3450rpm 208-230/460-3-60 @ 1725rpm
Dimensions, Motor Power and Specifications
381
203
454
508
191
330 DIA
25
11KW = 470
4KW = 3775.5KW = 3817.5KW = 381
OR 429352
73
248
211
283
64
2" NPT OR BSP
OPTIONAL DISCHARGEPIPE ASSEMBLY
3" FNPT
3/4" FNPT
BOTTOM VIEW
0 4 - 6
SERIES ‘EO’ VERTICal PUMP
Flows to 300lpm or 15m head ■at 50hz
Non-metallic solution contact: ■CPVC □PPP □100% PVDF □
Viton or EPDM Elastomers ■Runs-Dry - no seals ■no bearings
Chemical Duty Motor with ■2 part epoxy finish and stainless steel shaft
Shaft Vapour seal protects ■motor bearings
Centrifugal ■- quiet and vibration free
In or out of solution installation ■Will replace most OEM pumps ■
EFFICIENT AND DEPENDABLE PERFORMANCE FOR ACIDS
CAUSTICS ▪ CLEANERS ▪ PCB PLATING ▪ WATER ▪ EFFLUENT
Refer to Serfilco bulletin ■ P-312J for full technical details
Contact your local Serfilco sales ■office and quote ‘EO’ series
SERIES ‘EO’
HEA
D (m
)
LPM
0
2
4
6
8
10
12
14
16
0
30
60
90
12
0
15
0
18
0
21
0
24
0
27
0
30
0
EO2
EO3
EO4
EO1
0 4 - 7
Dimensions, Motor Power and Specifications
The semi-enclosed bottom impeller ■provides efficient flow performance at low horsepower
Titanium shaft and fasteners available ■Optional discharge pipe assembly ■and 18” suction extension (PP, CPVC and PVDF)
PP, CPVC, ECTFE or PVDF suction ■strainer available
Typical Applications:Fume scrubbing, PCB wet ■processing, out-of-tank pumping and filtration, and sump draining and waste treatment
THE PUMP SHOWN IS FITTED WITH THE OPTIONAL DISCHARGE PIPE
ASSEMBLY, TERMINATING IN A MALE NPT THREAD
SerieS eo DiMeNSioNS
eo1 eo1.25
CPVC PP PVDF CPVC PP PVDF
a 200 250
B 100 125
C 298 356
D 102 127
e 48 67
F 89 102
G 152 162 137 184 178 178
H
0.5HP 124 N/A
0.75HP N/A 124
1.0HP N/A 140
i
0.5HP 210 N/A
0.75HP N/A 212
1.0HP N/A 245
J 335 337
K 59 59
l 19 19
MiN leVel 83 92
Max leVel 105 105
SUCtioN 1-1⁄4" FEMALE NPT 1-1⁄2" FEMALE NPT
DiSCHarGe 1" FEMALE NPT 1-1⁄4" FEMALE NPT
weeP Hole 1⁄2" FEMALE NPT 1⁄2" FEMALE NPT
J
I
K
H
L
MAX LEVEL
MIN LEVEL
SUCTION
DISCHARGE
WEEP HOLE
FG
E
CD
B
A
BOTTOM VIEW
0 4 - 8
SERIES ‘EO3⁄4’ VERTICal PUMP
Flows to 70 LPM or 5m TDH @ ■50 Hz, 22 U.S GPM or 24 FT. TDH @ 60 Hz
Non-metallic solution contact ■-PP high temperature □polypropylene construction, CPVC or PVDF
Shaft vapour seal protects ■motor bearing
Runs dry – no bearings ■Chemical duty motor (0.09 kW) ■Centrifugal – quiet, vibration- ■free
In or Out-of-tank installation ■NPT connections ■
PLATING ▪ WET PROCESSING ACIDS ▪ CHEMICALS ▪ FUME SCRUBBERS AND CLEANING
SOLUTIONS
Refer to Serfilco bulletin ■ P-3123⁄4-I for full technical details
Contact your local Serfilco sales ■office and quote ‘EO3⁄4’ series
SERIES ‘EO3⁄4’
HEA
D (m
)
LPM
0
1
2
3
4
5
6
0 10 20 30 40 50 60 70
0 4 - 9
Typical applications include; fume scrubbing, PCB wet processing, out-of-tank pumping ■and filtration, sump draining and waste treatment, skimming in tank and mixing, agitating or transfer pumping.
The cantilevered shaft eliminates bearings and pump seals ■A compound impeller prevents liquid from rising into the column ■The pump will self prime when liquid is at impeller level ■Features a cantilevered, sleeved stainless steel shaft ■Optional suction strainer assembly, 18” suction extension and discharge pipe assembly ■are available
Dimensions, Motor Power and Specifications
MATERIAL MODEL1/8 HP MOTOR
VOLTAGE
CONNECTIONS
SUCTION DISCHARGE
PP, EPDM EO3⁄4PPL2-C1/8 115-230/1/50-60 TEFC ,MOTOR
WITH 8FT. CORD AND 3 PRONG
PLUG
1” F NPT 3⁄4” M NPTCPVC, EPDM EO3⁄4CL2-C1/8
PVDF, Viton EO3⁄4KV2-C1/8
0 4 - 1 0
SERIES ‘HB’ VERTICal SUMP PUMP
Flows to 450lpm and heads ■to 28m at 50hz
Corrosion resistant CPVC ■construction with graphite or Roulon® bearings and ceramic liners.
Viton ■ ® or EPDM elastomers
Hastelloy ■ ® and Titanium fasteners available
Pump lengths 610mm / 915mm ■/ 1220mm / 1524mm
Chemical Duty Motor with ■2 part epoxy finish and stainless steel shaft
Shaft Vapour seal protects ■motor bearings
Centrifugal ■- quiet and vibration free
BSP or NPT connections ■Water or Product ■lubricated bearings
HIGH EFFICIENCY AND LOW ENERGY USAGE FOR WASTES ▪ ACIDS ▪ PLATING CHEMICALS
Refer to Serfilco bulletin ■ P-302 for full technical details
Contact your local Serfilco sales ■office and quote ‘HB’ series
SERIES ‘HB’
HEA
D (m
)
LPM
0
5
10
15
20
25
30
35
0 100 200 300 400 500
2
3
4
5
6
1
0 4 - 1 1
Typical applications include: Chemical transfer, storage tanks, deep standby pumping ■(when priming not possible) and sump draining and water treatment.
Standard CPVC construction (high temperature models are available) ■EPDM and Viton elastomers ■Stainless steel shaft sleeved in CPVC offers unmatched strength and chemical ■resistance
The bearing liner is made of a special fluoride-resistant ceramic ■Optional 2” suction extension available ■Available with option of Viton O-Rings and Hastelloy bearing fasteners ■
Dimensions, Motor Power and Specifications
HORSE POWER
RPM NEMA FRAME
A B
@ 60 Hz mm mm
1 1725
143TCZ 251 2441.5 1725
1.5 3450
2 3450 145TCZ 251 244
3 3450 182TCZ 302 273
53450 184TCZ 337 286
7.5
ot
He
r p
uM
ps
0 5 - 1
O t h e r P u m p s
Serfilco's XXXXXXX.
0 5 - 2
SERIES ‘AOD’ aIR OPERaTED DIaPHRagM PUMPS
1 ■ ⁄4" up to 2" Sizes
Wide Selection of Materials: ■316ss, PP, Aluminium, PDVF, □Conductive Nylon, NylonTeflon, Nitrile, EPDM, Viton □
Patented Lube free air system ■Will not stall at low speeds ■Self priming ■Runs Dry ■
1 ■ ⁄4" pumps flows to 15lpm and 70m head3 ■ ⁄8" pumps flows to 35lpm and 83m head1 ■ ⁄2" pumps flows to 50lpm and 83m head1" pumps flows to ■145lpm and 70m head1 ■ 1⁄2" pumps flows to 340lpm and 83m head2" pumps flows to ■550lpm and 83m head
Refer to Serfilco bulletin ■ P-605 for full technical details
Contact your local Serfilco sales ■office and quote ‘AOD’ series
PUMP ANYTHING THAT CAN POUR SAFELY AND RELIABLY
HANDLE ■SOLIDS UP TO 6.4M
BAND CLAMP ■AND BOLTED DESIGN
SIZES FROM ■1⁄4" UP TO 2"
METAL AND ■PLASTIC OPTIONS
0 5 - 3
Geolast is a nitrile blend and is a replacement for Buna-N or Neoprene ■Santoprene is an EPDM blend ■Aluminium pumps have PP valve seats, except aluminium w/TFE models which have ■nylon valve seatsAll pumps built with TFE contain a backup Santoprene diaphragm ■All pumps are lube-free and non-stalling ■Optional Air pressure regulator available ■Ground bond cabling kit available ■Available with Accessory Kit for drum transfer applications ■
Dimensions, Motor Power and Specifications
Bolted ModelsMaterial of Construction
Wetted Housings
Diphragm Elastomers / Valve Seats
1⁄4" 1⁄2" 1" 11⁄2" 2"
0-16 l/m (4 GPM)
0-65 l/m (14 GPM)
0-156 l/m (41 GPM)
0-492 l/m (130 GPM)
0-681 l/m (180 GPM)
Polypropylene
Geolast / Nitrile YES YES YES YES YESPTFE YES YES YES YES YES
Santoprene/EPDM YES YES YES YES YESVitron - YES YES - -
Nylon PTFE YES YES - - -Conductive Nylon PTFE YES YES - - -
PVDFPTFE YES YES YES YES YES
Santoprene/EPDM YES YES YES YES YESVitron - YES YES YES YES
AluminiumGeolast / Nitrile - YES YES YES YES
PTFE/Nylon - YES YES YES YESSantoprene/EPDM - YES YES YES YES
Stainless SteelPTFE - YES YES YES YES
Santoprene/EPDM - YES YES YES YESGeolast / Nitrile - YES YES YES YES
Band Clamp ModelsMaterial of Construction
Wetted Housings
Diphragm Elastomers / Valve Seats
1⁄4" 1⁄2" 1"
0-34 l/m (9 GPM) 0-65 l/m (14 GPM) 0-156 l/m (41 GPM)
PolypropyleneGeolast / Nitrile YES YES YES
PTFE YES YES YESSantoprene/EPDM YES YES YES
Conductive Nylon PTFE YES - -
PVDFPTFE YES YES YES
Santoprene/EPDM YES - -
C o n t a c t s
SERFILCO INTERNATIONAL
Siemens Road, Northbank Industrial Estate,
Irlam, Manchester, M44 5AH England
PHOnE: +44 (0)161-775-1910
faX: +44 (0)161-775-9823
E-MaIl: [email protected]
WEB: www.serfilco.com
SERFILCO HEADQUARTERS
2900 MacArthur Boulevard,
Northbrook, Illinois 60062-2005
PHOnE: +1 847-509-2900
TOll fREE: +1 800-323-5431
faX: +1 847-559-1995
E-MaIl: [email protected]
WEB: www.serfilco.com
SERFILCO® (Shanghai)
Chemical Equipment Co., Ltd
Unit 4, No 288, Changhe Road,
Putuo District, Shanghai, China 200331
PHOnE: +86 0-21-63639829
faX: +86 0-21-63639815
E-MaIl: [email protected]
WEB: www.serfilco-china.com
SERFILCO GmbH
Am Handwerkerzentrum 1,
D 52156 Monschau, Germany
PHOnE: +49 2472-8026015
faX: +49 2472-8026019
S.A.R.L. Serfilco France
34 Avenue des Champs Elysees,
Paris, 75008 France
PHOnE: +33 (0) 1-44-95-37-66
faX: +33 (0) 1-48-86-97-36
SERVICE FILTRATION of CANADA, Ltd.
4141 Sladeview Crescent, Units 12 & 13
Mississauga, Ontario, Canada L5L 5T1
PHOnE: +1 905-820-4700 or
+1 800-565-5278 (Canada only)
faX: +1 905-820-4015
E-MaIl: [email protected]
WEB: www.service-filtration.com
SERFILCO INTERNATIONAL LTDSiemens Road, Northbank Industrial Estate, Irlam, Manchester, M44 5AH England
PHOnE: +44 (0)161-775-1910 faX: +44 (0)161-775-9823 E-MaIl: [email protected] WEB: www.serfilco.com
g l o b a l P r o d u c t s , l o c a l S e r v i c e &
a d v i c e Yo u C a n R e l y O n