Creating Lubricants with Industry PRODUCT BROCHURE
Creating Lubricants with IndustryPRODUCT BROCHURE
2 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
ROCOL has been creating lubricants with industry since the late 1870’s when the Ragosine OilCompany pioneered the development and manufacture of performance lubricants fromconventional mineral oils. Throughout its history the company has continued to build andenhance its reputation through the performance of its products.
Throughout industry ROCOL products are specified and used with the confidence achievedthrough years of providing products that perform to the highest levels. Today the ROCOL brandstands for superior performance, technical innovation and the highest standards of quality andreliability, values which have been achieved through years and years of unswerving attention todetail in the design and manufacture of products.
In the early part of the 20th century the great ships of the oceans were rightly acclaimed as theengineering achievement of the time. ROCOL provided the specialised lubricants that redefinedthe performance and reliability of much of the mechanical equipment essential to keeping theseships afloat. ROCOL played an equally important role in keeping the early aeroplanes in the skythrough the development of revolutionary lubricants containing molybdenum disulphide. Asmanufacturing developed, there has been a need to provide lubricants to meet industry’s evengreater demands. This has led to the development of products now designed for the mostarduous working conditions in a wide range of industrial applications.
Internationally well known companies such as Unilever, Nestle, Black & Decker, General Motors,Du Pont, Coca Cola, Rolls Royce, Lucas, Toyota, British Aerospace, Rockwell, Airbus, Ministriesof Defence, British Oxygen, Dunlop, Agip, FMC, VME (Volvo Michelin Euclid), JCB, ICI, Ford,Hughs Tools, Metal Box, Monsanto, Ciba Geigy, to name a few, are all companies ororganisations that have benefited from the use of ROCOL Speciality Lubricants.
The development and diversification of the ROCOL group over its long history have been aresult of the quality of its people, product and partners. The reputation, performance andreliability of ROCOL products, with their millions of users world-wide, is clearly the source of theCompany’s strength and ROCOL will continue Creating Lubricants with Industry.
HISTORY OF ROCOL
BEARING GREASES 6
CHAIN LUBRICANTS 10
ANTI-SEIZE PRODUCTS 11
WIRE ROPE LUBRICANTS 12
CORROSION PROTECTION 13
GEAR LUBRICANTS 14
INDUSTRIAL CLEANERS 15
ASSEMBLY & DRY FILM LUBRICANTS 16
COMPRESSOR & HYDRAULIC OILS 17
GENERAL PURPOSE& ANCILLARY PRODUCTS 18
SEALANTS & PIPE JOINTING 19
PRODUCT INDEX
MAINTENANCE PRODUCTS 6-19
frontline 4-05
BEARING GREASES 20
CHAIN LUBRICANTS 21
ANTI-SEIZE AND ASSEMBLY LUBRICANTS 21
GEAR, COMPRESSOR, AIRLINE& HYDRAULIC FLUIDS 22
GENERAL PURPOSE PRODUCTS 23
FOOD GRADE PRODUCTS 20-23
TRI-LOGIC MACHINING FLUID SYSTEM 24
WATER MIX CUTTING FLUIDS 26
WATER MIX GRINDING FLUIDS 27
MACHINE TOOL CARE PRODUCTS 29
DILUTION CONTROL 29
HAND APPLIED CUTTING LUBRICANTS 30
LAYOUT INKS 31
SPATTER RELEASE 31
DYE PENETRANT CRACK DETECTION 31
MOULD RELEASE PRODUCTS 31
COLD METAL FORMING 32
METALWORKING PRODUCTS 24-33
ROCOL WORLDWIDE 34-35
3Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
frontlineall the applications • all the answers
of engineers lubfrontline ra
maintenance lubricants
90%
FOODLUBE UNIVERSAL
Food gradegrease formaximum bearing life
PRECISION SILICONE SPRAY
Clean,non toxic highperformancelubricant
FOODLUBE CHAIN SPRAY
Food gradelubricant formaximum chain life
FOODLUBE SPRAY
Highperformancefood grade lubricant
ANTI-SEIZE SPRAY
Copper based anti-seizespray - zerocorrosion
ANTI-SEIZE COMPOUND
Copper basedanti-seizecompound -zero corrosion
DRY PTFE SPRAY
Premiumperformancedry filmlubricant
PENETRATING SPRAY
ExtremeperformanceMoly reinforcedrelease spray
SAPPHIRE SPRAY GREASE
Highperformancemulti-purposegrease
SAPPHIRE PREMIER
High temperaturegrease formaximumbearing life
SAPPHIRE 2
Triplelifebearinggrease
FOAM CLEANER SPRAY
Powerfulfast actingfoodsafefoam cleaner
SAPPHIRE PRECISION LUBE
5 timesmorewearresistance
SAPPHIRE 1 UNILUBE
Automaticlubrication withSapphire triple lifebearing grease
ELECTRA CLEAN SPRAY
High performancezero residueelectrical cleaner
CHAIN & DRIVE SPRAY
Triplelifechainprotection
COLD GALVANISING SPRAY
Zinc rich,long termcorrosionprotection
INDUSTRIAL CLEANER SPRAY
Fastevaporatingmulti-purposecleaner
WIRE ROPE SPRAY
Zero corrosion,triple penetrationwire ropelubricant
TUFGEAR SPRAY
Doublelife opengearlubricant
CHAIN GUARD HI-LOAD
Triplelifechainprotection
BELT DRESSING SPRAY
Eliminates beltslip andmaximises belt life
GASSEAL
Highperformancenon settingpipe sealant
LEAK DETECTOR SPRAY
Instantleakdetectorspray
DRY MOLY SPRAY
Extremeload dryfilmlubricant
4 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
metalworking lubricants
MOISTURE GUARD SPRAY CLEAR
5 yearindoorcorrosiveprotective
MOISTURE GUARD SPRAY GREEN
5 yearindoorcorrosiveprotective
TRI-Logic RTD
Tappingfluid thatfortifiescutting fluid
RTD SPRAY
Metal cuttinglubricantwhich doublestool life
RTD LIQUID
Metal cuttingliquid whichdoublestool life
RTD FOAMCUT
Foaminglubricant whichdoubles toollife
RTD CLEANCUT
Sulphur andchlorine freetapping fluid
RTD COMPOUND
Metal cuttingcompoundwhich doublestool life
SPATTER RELEASE SPRAY
Triple coveragenon flammablespatter release
WELDMATE SPATTER OFF SPRAY
Water basedspatter release
SPATTER RELEASE FLUID OIL FREE
Paintablewater basedspatterrelease
FLAWFINDER DEVELOPER SPRAY
Precisioncrackdetectiondeveloper
FLAWFINDER DYE PENETRANT SPRAY
Precisioncrackdetectionpenetrant
FLAWFINDER CLEANER SPRAY
Fast drying, noresidue cleaner
ULTRAGLIDE SPRAY & FLUID
Totalprotectionslidewaylubricant
MOULD RELEASE SPRAY
Long lastingPTFE mouldrelease
PR SPRAY
Long lastingsiliconemouldrelease
LAYOUT INK SPRAY WHITE
Ultimate metallayout ink fordark metalsurfaces
LAYOUT INK SPRAY BLUE
Ultimate metallayout ink forbright metalsurfaces
RS-7 SPRAY
Long lastingsilicone freemouldrelease
rication needs are contained within theange of fast moving small pack consumables
5Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
MAINTENANCE PRODUCTS
Part Code Unit Size
1217112176121751217812179
400g5kg18kg50kg185kg
Part Code Unit Size
12601126041260612614126081260912710
400gAutolube
5kg18kg50kg185kg
Unilube
Part Code Unit Size
12751127551275412758
380g4kg18kg50kg
Part Code Unit Size
1227612284
5kg18kg
SAPPHIRE BEARING GREASES
The ROCOL SAPPHIRE bearing grease range will provide effectivelong term lubrication and meet the ever increasing needs of today’sproduction environment.
There are 13 key greases under the SAPPHIRE banner designed toencompass the widest possible range of industrial operatingconditions. SAPPHIRE bearing greases provide industry with aneasily identifiable range of high performance lubricants, which havebeen developed to extend bearing life, provide superior corrosionprotection and to be suitable for all bearing types.
SAPPHIRE 2“SAPPHIRE 2 lasts 3 times longer than conventional multi-purpose bearing greases.” Thisrevolutionary high performance multi-purpose, multi-complex soap grease has excellentload carrying capability and corrosion resistant properties and will significantly extendrelubrication intervals. Temperature range -30ºC to +150ºC. NLGI 2. The blue colourenables easy identification in use.
SAPPHIRE 1SAPPHIRE 1 has all of the performance characteristics of SAPPHIRE 2 and isrecommended for remote lubrication or long pipe run applications. Temperature range-30ºC to +150ºC. NLGI 1.
SAPPHIRE 000SAPPHIRE 000 is recommended and approved for use in centralised lubrication systemsand for grease filled gearboxes. Temperature range -30ºC to 100ºC. NLGI 000.
SAPPHIRE AQUA 2A soap thickened bearing grease designed to give excellent resistance to water washout.SAPPHIRE AQUA 2 will provide exceptional corrosion protection and long term lubricationfor bearings that are operating in water or subjected to continual washing by water.Temperature range -20ºC to +150ºC. NLGI 2.
SAPPHIRE AQUA-SILA silicone grease with excellent high temperature resistance. UK Water Byelaws Schemeapproved for use with potable water. Good resistance to chemicals, oils, water and gases.Does not affect most rubbers and plastics. SAPPHIRE AQUA-SIL is recommended for longterm lubrication of bearings, slides and valves operating in extremes of temperature wherecontamination by chemicals, oil or potable water is possible. Temperature range -40ºC to+200ºC. NLGI 3/4.
Part Code Unit Size
122511225312256
85g500g5kg
6 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
Part Code Unit Size
122631226612268
500g5kg50kg
Part Code Unit Size
12330123311233412336
100g700g1kg5kg
Part Code Unit Size
12211122161221412218
400g5kg18kg50kg
Part Code Unit Size
127611276512764
400g5kg18kg
Part Code Unit Size
1201112013120161202412018
400g500g5kg18kg50kg
Part Code Unit Size
1205112056
380g4.5kg
SAPPHIRE BEARING GREASES
SAPPHIRE AQUA-SIL HI-LOADA high load silicone grease which contains molybdenum disulphide. UK Water ByelawsScheme approved for use with potable water. Excellent high temperature resistance.SAPPHIRE AQUA-SIL HI-LOAD is recommended for the lubrication of bearings,slides and valves operating under heavy loads and in aggressive environments.Temperature range -40ºC to +200ºC (Short periods +220ºC). NLGI 3/4.
SAPPHIRE ENDUREA perfluorinated polyether (PFPE) grease, thickened with PTFE. Provides long termlubrication of bearings, slides, small gears, chains and valves operating in aggressiveenvironments such as high temperatures, or where contamination by chemicals or solvents is possible. Temperature range: -25ºC to +280ºC. NLGI 2.
SAPPHIRE EXTREMEA semi-synthetic grease containing molybdenum disulphide which provides excellentresistance to high temperature, heavy loading and vibration. SAPPHIRE EXTREME issuitable for both plain and antifriction bearings. Temperature range -10ºC to +235ºC(intermittent temperatures to +250ºC). NLGI 2/3.
SAPPHIRE HI-LOAD 2A multi complex soap thickened grease formulated to provide protection against heavyloads and vibration. SAPPHIRE HI-LOAD 2 contains molybdenum disulphide and willextend relubrication intervals. Suitable for all bearing types. Temperature range -30ºC to+150ºC. NLGI 2.
SAPPHIRE HI-PRESSUREA clay thickened grease containing a high level of molybdenum disulphide suitable for thelubrication of plain bearings operating under heavy loading. SAPPHIRE HI-PRESSURE willreduce wear and offers excellent corrosion protection. Temperature range -20ºC to+150ºC. NLGI 2.
SAPPHIRE HI-SPEEDA unique synthetic based soap grease which extends the boundaries of high speedgreases. SAPPHIRE HI-SPEED has a maximum speed rating of 1.25 x 106 DmN coupledwith excellent load carrying capacity and is recommended for use on machine toolspindles, textile spinning machines, aerospace and other high speed bearing applications.Temperature range -40ºC to +120ºC. NLGI 2.
7Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
Part Code Unit Size
34305 Aerosol
Part Code Unit Size
1260412600
Complete120mlRefill 120ml
Part Code Unit Size
12710 100ml
Part Code Unit Size
12810 100ml
Part Code Unit Size
38111 -
Part Code Unit Size
38110 -
SAPPHIRE BEARING GREASES
SAPPHIRE PREMIERA premium performance multi-purpose bearing grease for use in arduous applications.Fortified with PTFE, SAPPHIRE PREMIER provides excellent lubrication where good loadcarrying at elevated temperatures in high speed bearings is required. For exampleelectrical motors and fan bearings. Temperature range -50˚C to +200˚C. NLGI 2.
SAPPHIRE LO-TEMP 2A semi-synthetic multi complex soap grease developed to provide low start up andrunning torques at temperatures as low as -50ºC. SAPPHIRE LO-TEMP 2 offers highresistance to load and wear and is recommended for use with plain or antifrictionbearings. Temperature range -50ºC to +120ºC. NLGI 2.
Part Code Unit Size
1281012471124751247412479
Unilube380g4kg18kg170kg
Part Code Unit Size
127411274512744
400g4.5kg18kg
METHODS OF APPLICATION
In addition to the conventional packaging SAPPHIRE multi purposegrease is available in 3 distinctive applicators.
SAPPHIRE SPRAY GREASE• Aerosol applied where conventional application methods are prohibitive
SAPPHIRE AUTOLUBE• Electromechanical• Single point automatic lubricator• Simple to install• Up to 3 years grease supply• Consistent delivery• Replaceable grease cartridges
SAPPHIRE 1 UNILUBE• Gas generated automatic lubricator • Operates in any position - even under water• Intrinsically safe• Contains SAPPHIRE 1 Triple Life Bearing grease
SAPPHIRE PREMIER UNILUBE• Gas generated automatic lubricator • Up to 12 months automatic lubrication• Suitable for higher speed and temperature applications• Contains SAPPHIRE Premier
SAPPHIRE CARTRIDGE GUN• High pressure grease gun for use with the standard ROCOL grease cartridge
SAPPHIRE KEG PUMP• Lever action keg pump for use with the standard
ROCOL 18kg grease pail
8 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
The choice of grease will depend upon a number of factors, including the application,operating conditions and the environment.
Product selection is simplified with the comprehensive ROCOL SAPPHIRE range and togetherwe are committed to providing you with the correct choice of lubricant to maximise operatingefficiency, even in the harshest environments.
*
**
* ***
****
****
****
*** *******
********
***** **
*** * ** ****
*** ***
*****
*
*
**
*
FOODLUBE ENDURE 00
FOODLUBE HI-TEMP
FOODLUBE UNIVERSAL 0
FOODLUBE UNIVERSAL 2
FOODLUBE UNIVERSAL 000
SAPPHIRE 000
SAPPHIRE 1
SAPPHIRE 2
SAPPHIRE AQUA 2
SAPPHIRE AQUA SIL
SAPPHIRE AQUA SIL HI-LOAD
SAPPHIRE ENDURE
SAPPHIRE EXTREME
SAPPHIRE HI-LOAD
SAPPHIRE HI-SPEED
SAPPHIRE PREMIER
SAPPHIRE HI-PRESSURE
SAPPHIRE LO-TEMP 2
-25ºC to +280ºC
-20ºC to +200ºC
-50ºC to +160ºC
-50ºC to +160ºC
-50ºC to +160ºC
-30ºC to +100ºC
-30ºC to +150ºC
-30ºC to +150ºC
-20ºC to +150ºC
-40ºC to +200ºC
-40ºC to +200ºC
-25ºC to +280ºC
-10ºC to +235ºC
-30ºC to +150ºC
-40ºC to +120ºC
-50ºC to +200ºC
-20ºC to +150ºC
-50ºC to +120ºC
TRACE
TRACE
DIRECT
* * *** DIRECT
TRACE2
0
2
000
000
1
2
2
3/4
3/4
2
2/3
2
2
2
2
2
TEMPERATURE RANGE
NLGIHIGH
SPEEDLIGHTDUTY
HIGHLOAD
FOOD WATER VIBRATIONCHEMICALCONTACT
PLAINBEARING
ANTI-FRICTIONBEARING
MULTIPURPOSE
POTABLEWATER
*
BEARING GREASE SELECTION CHART
9Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
CHAIN LUBRICANTS
A comprehensive range of lubricants designed to rapidly penetratechain links and pins and operate in a wide range of environments.Whatever the type of drive or conveyor chain in use, ROCOLprovides a lubricant to ensure trouble free operation - cuttingexpensive downtime and productivity loss.
CHAIN & DRIVE SPRAYMulti purpose aerosol applied drive and conveyor chain lubricant. CHAIN & DRIVE SPRAYprovides a thin water resistant film of temperature-resistant mineral oil held in a quick-break foam. Use for the lubrication of drive and conveyor chains not fitted with automaticlubrication systems. Temperature range -30ºC to +150ºC.
CHAIN & DRIVE FLUIDBulk fluid general purpose chain lubricant with good load carrying properties.Provides long term wet film lubrication, for extended chain life.Temperature range -15ºC to +120ºC.
CHAINGUARD HI-LOAD SPRAYHeavy duty aerosol applied drive and conveyor chain lubricant - thin, water resistant filmwith MoS2 (moly) for good load carrying capabilities. Use to lubricate and protect chainsand drive systems operating under heavy loads or in difficult conditions. Ideal for fork lifttruck chains. Temperature range -30ºC to +180ºC.
CHAINGUARD 230High temperature wet film chain and conveyor lubricant, which provides long life wet filmlubrication at high temperatures. Use for the lubrication of chains running continuously attemperatures up to 230ºC on drying machines, bakery ovens and paint stoving ovens.Temperature range +10ºC to +230ºC.
CHAINGUARD 280High temperature chain lubricant with good load carrying properties. Provides long termwet film lubrication at high temperatures. Use to lubricate conveyor chains and bearingsoperating either continuously or intermittently at high temperatures. Temperature range+10ºC to +280ºC.
CHAINGUARD 550Very high temperature graphited synthetic chain lubricant. Use in high temperatureenvironments where the risk of product contamination by the lubricant cannot be toleratede.g. bakery oven chains. Operating temperature range -10ºC to +550ºC, dry film above+180ºC.
DRY MOLY FLUIDDry film coating of resin bonded molybdenum disulphide. This coating can be used forpre-treatment and lifetime dry lubrication of chains. Ideal for use in conditions that do notpermit oil or grease based lubricant to be used. Temperature range -50ºC to +450ºC.
Part Code Unit Size
2230622309
5L20L
Part Code Unit Size
22141 Aerosol
Part Code Unit Size
2225522265
5L20L
Part Code Unit Size
2223522236
5L20L
Part Code Unit Size
2207622075
5L20L
Part Code Unit Size
22001 Aerosol
Part Code Unit Size
10205 5L
10 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
GENERAL PURPOSE
APPLICATION
HIGHLOAD
DUST/ DIRT
HUMID WET SOLIDLUBRICANTS
FOODGRADE
CHAIN & DRIVE SPRAY -30ºC to +150ºC
CHAIN & DRIVE FLUID -15ºC to +120ºC
CHAIN GUARD HI LOAD SPRAY -30ºC to +180ºC MoS2
CHAIN GUARD 230 +10ºC to +230ºC
CHAIN GUARD 280 +10ºC to +280ºC
CHAIN GUARD 550 -10ºC to +550ºC GRAPHITE
DRY MOLY FLUID -50ºC to +450ºC MoS2
FOODLUBE CHAIN FLUID -20ºC to +150ºC YES
FOODLUBE CHAIN SPRAY -20ºC to +110ºC YES
(Dry film above +180ºC)
** **
****
*
******
**** ******
**
*****
CHAIN LUBRICANT SELECTION CHART
TEMPERATURE RANGE ºC( CONTINUOUS OPERATION )
Part Code
Part Code
Unit Size
14030140331403514038
85g500g5kg18kg
Unit Size
14015 Aerosol
Part Code Unit Size
14143 500g
Part Code Unit Size
14021 Aerosol
ANTI-SEIZE PRODUCTS
Seizure of fasteners presents a major inconvenience in many repairand maintenance situations, adding to both the time and cost of thejob. ROCOL provide a range of premium quality anti-seize productswhich will protect fasteners against wet, dirty and hot conditions aswell as from chemical attack, easing future dismantling therebyreducing downtime and costs.
ANTI-SEIZE COMPOUNDA copper based anti-seize paste containing a high level of metallic and lubricating solids.Use to prevent galling and seizure of screws, bolts, studs and other static threadedfasteners particularly those subject to wet conditions and high temperatures. Temperaturerange -10ºC to +1100ºC.
ANTI-SEIZE SPRAYCopper based aerosol applied anti-seize lubricant - similar to Anti-Seize Compound. Useto protect all kinds of threaded components where the convenience of aerosol applicationis preferred. Temperatures up to +1100ºC.
ANTI-SEIZE STAINLESSHigh temperature metal free anti-seize paste - provides anti-seize properties across a widetemperature range and where low sulphur and chlorine levels are essential. Particularlysuited for use on stainless steel and nimonic fasteners. Temperature range -40ºC to+1000ºC. Approved to Rolls Royce MSRR 4008.
PENETRATING SPRAYPowerful jet spray of penetrating oil containing MoS2 (moly) helps release seizedcomponents affected by rust, dirt or scale and provides lubrication during dis-assembly.Film protects against damage and further corrosive attack.
11Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
WIRE ROPE LUBRICANTS
Wire ropes are frequently required to operate in the most severeconditions, often constantly exposed to the elements. ROCOL wirerope lubricants are designed to penetrate to the rope core,protecting and lubricating inside and out to extend safe workinglife, reducing unplanned down time and replacement costs.
WIRE ROPE DRESSINGA tenacious, semi-fluid, non-melting grease, containing MoS2 (moly) which penetrates tothe rope core providing excellent lubricity and high load carrying capabilities. Repels waterand protects against corrosion, even in sea water environments. Easily applied by brush -even at low temperatures. Use on all non-friction drive type ropes in hostile conditions ondrag lines, cranes, derricks, submersible platforms, steelworks equipment, tower cranes,excavators, etc. Temperature range -30ºC to +100ºC.
WIRE ROPE SPRAYAerosol applied wire rope lubricant containing MoS2 (moly) and other anti-wear additives.Leaves a film which gives similar operating characteristics to ROCOL WIRE ROPEDRESSING. Temperature range -30ºC to +100ºC.
WIRE ROPE FLUIDDewatering rope lubricant in solvent base which evaporates to leave a long lastingprotective film containing MoS2 (moly) similar to ROCOL WIRE ROPE DRESSING. Appliedby compressed air spray, brush or swab. Suitable for application to wet ropes.Temperature range -30ºC to +100ºC.
BIOGEN ROPE GUARDA solvent free, semi-fluid rope dressing. It is formulated to penetrate to thecore of all wire ropes and give excellent lubrication and corrosion protection.The product also repels water, making it particularly suitable for areas ofextreme water contamination. BIOGEN ROPE GUARD has been developed toensure 100% biodegradability and relies on micro-organisms to assist in thedegradation process. Temperature range -30˚C to +100˚C.
Part Code Unit Size
2002620024
4kg18kg
Part Code Unit Size
20015 Aerosol
Part Code Unit Size
2004620045
5L20L
Part Code Unit Size
19044 18kg
12 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
CORROSION PROTECTION
Unprotected metal surfaces may be subject to attack by corrosionleading to problems ranging from unsightly staining through tocomponent failure. ROCOL corrosion preventatives protect suchcomponents, extending working life and reducing the need forrework and repair.
COLD GALVANISING SPRAYA thin zinc rich film providing long term corrosion protection. Use in severe conditions.Ideal for repairing/patching up damaged galvanised surfaces.
HEAVY DUTY RUSTSHIELD SPRAYThin waxy film giving extended corrosion protection - even in the most severe conditions,also provides residual lubrication for assembly etc. Use to protect metal parts storedoutdoors, in transit or indoors under severe corrosive conditions for extended periods.Ideal for the protection of machines and equipment shipped overseas.
MOISTURE GUARD SPRAY & FLUID(GREEN/CLEAR)Almost dry film which is easily handled, protects against fingerprint corrosion and alsoprovides residual lubrication for assembly. Displaces moisture - particularly effective inhumid conditions and where condensation is a problem. Use for medium/long term indoorcorrosion protection of bright metal components and mould tools during storage orshutdown.
METALGUARDA corrosion protective for the temporary indoor protection of components such as gears,pressings and any machined metal components which require protection from corrosion -whether in storage, transit or between operations.
TUFSHIELDA heavy duty ‘high cling’ grease designed to protect all metals under the severestconditions of erosion and corrosion. It is particularly effective in areas subject to flooding,repeated forceful washdowns and marine environments.
Z5 FLUIDHighly versatile film which cleans, penetrates and displaces water. Provides lightlubrication and corrosion protection and does not attract dirt or dust. Use to dry outelectronic equipment and for day-to-day maintenance lubrication.
Z25 FLUIDLong lasting, non drying lubricant providing corrosion protection for up to 1 year. Use tofree seized metal parts and in applications where long lasting lubrication and corrosionprotection is required.
Z30 SPRAY & FLUIDLong term, heavy duty corrosion inhibitor, dries to form a soft waxy transparent filmproviding protection for up to 2 years. Use on equipment in environments where corrosionprevention and lubrication are required on chains, gears, wire ropes etc.
Part Code Unit Size
69515 Aerosol
Part Code Unit Size
69100 Aerosol
Part Code Unit Size
69025 (C)69045 (G)69006 (G)
AerosolAerosol
5L
Part Code Unit Size
6906369069
20L200L
Part Code Unit Size
3710337104
450g18kg
Part Code Unit Size
3700837009
20L200L
Part Code Unit Size
3701837019
20L200L
Part Code Unit Size
37020370223702837029
Aerosol5L20L200L
13Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
GEAR LUBRICANTS
ROCOL manufacture a comprehensive range of gear lubricantswhich can be divided into 2 categories - exposed open gears andenclosed gearboxes.
Open gears are used extensively across industry, particularly in highload dusty environments. ROCOL open gear lubricants are designedto reduce wear on gear teeth and protect against corrosion even inthe most extreme environments, resulting in prolonged, efficientgear life. All ROCOL open gear lubricants are bitumen free.
ROCOL’s range of gearbox lubricants are designed to provideextended service life, reducing maintenance time and costs.
TUFGEAR SPRAYProvides a thin water repellent film with good load carrying capabilities. Highly tenacious,will not throw off in operation. Use on small gear trains, gears on overhead equipment and for application through guards onto moving gears. Temperature range -10ºC to +100ºC.
TUFGEAR UNIVERSALA heavy duty open gear lubricant for demanding applications. Developed to deal with theloads found in the largest gears and to withstand the aggressive environments withinwhich they operate, including gears that are exposed to strong underwater currents.Temperature range -40˚C to +120˚C.
TUFLUBE ALLWEATHERExtremely adhesive water resistant lubricant with excellent water displacing propertieswhich provides good corrosion protection and long term lubrication. Can be applied to wetsurfaces. Use on sliding surfaces, gears, slow speed bearings and outdoor equipment orwherever a heavy duty lubricant is required, particularly in wet or humid conditions. Temperature range -30ºC to +70ºC.
SAPPHIRE HI-TORQUEHigh performance gear oils featuring the unique ROCOL Start Up Protection System(SUPS) which reduces wear, provides superior load carrying capabilities and stability athigh temperatures. Approved for use by David Brown Gearboxes. Temperature range-20ºC to +120ºC.
Part Code Unit Size
18105 Aerosol
Part Code Unit Size
183031830518304
300g5kg18kg
Part Code Unit Size
182711827618244
400g5kg18kg
Part Code Unit Size
210062100521009
210162101521019
210262102521029
210362103521039
210462104521049
Viscosity
100
220
320
460
680
5L20L200L
5L20L200L
5L20L200L
5L20L200L
5L20L200L
14 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
INDUSTRIAL CLEANERS
Effective cleaning is an essential part of most maintenance tasks. ROCOL provide a range of cleaners designed to meet therequirements of all jobs.
ELECTRA CLEAN SPRAYA high performance cleaner suitable for electrical components and equipment, includingcontacts, switches, motors and windings. In addition to a high level of cleaning efficiencyELECTRA CLEAN SPRAY will evaporate completely leaving no residue to affectconductivity. Do not use on live or energised equipment. Foodsafe - contains only FDAlisted ingredients, NSF K2 Registration.
FOAM CLEANER SPRAYUniversal water based, fast acting foaming cleaner which cuts through grease, grime anddirt. Free from chlorinated solvents. Foodsafe - contains only FDA listed ingredients, NSFA1 registered.
HEAVY DUTY CLEANER SPRAY & FLUIDA powerful, non-chlorinated, slow evaporating solvent blend which can be emulsified withwater if required allowing built up dirt and grease to be easily removed by either wiping orwater washing. Leaves no oily film. Harmless to most plastics and paints.
INDUSTRIAL CLEANER RAPID DRY SPRAYPowerful fast evaporating non-chlorinated solvent cleaner, dries in seconds to leave aresidue free surface.
ULTRACLEAN 2000 FLUIDNon-chlorinated water based cleaner - effectively cuts through grease, grime and dirt andrinses clean away to leave no residue. Economical in use - 1 part ULTRACLEAN 2000 canbe diluted with up to 100 parts of water.
QUICK & CLEANHeavy duty waterless hand cleaning wipes for the quick, efficient removal of the heaviestsoils. Quick & Clean provides the ideal solution for thorough hand cleaning in allapplication areas. Supplied in a convenient tub, it contains 72 wipes ideal for use wherethere is no access to a conventional washroom. Quick & Clean leaves the hands clean,protected and conditioned.
Part Code Unit Size
34066 Aerosol
Part Code Unit Size
34141 Aerosol
Part Code Unit Size
3401134014
Aerosol5L
Part Code Unit Size
34131 Aerosol
Part Code Unit Size
3416634168
5L20L
Part Code Unit Size
34100 Tub
15Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
Part Code Unit Size
10025 Aerosol
Part Code Unit Size
100401004610047
100g750g18kg
Part Code Unit Size
10205 5L
Part Code Unit Size
100501005610057
100g750g18kg
Part Code Unit Size
10125 Aerosol
APPLICATION
ASSEMBLY & DRY FILM LUBRICANTS
DRY MOLY SPRAYAerosol applied thin, dry film of resin bonded MoS2 (moly) which withstands high loadsand temperatures. Does not pick up dirt and dust. Use as a dry film lubricant on slides,gears, plain bearings, as an anti-seize on precision threaded components and inapplications where contamination of finished components cannot be tolerated.Temperature range up to +450ºC.
DRY MOLY PASTEA soft paste with high MoS2 (moly) content which can be rubbed or burnished on to thesurface to give a dry bonded film with high load carrying capacity. Use for dry filmlubrication where product contamination cannot be tolerated and as a lubricant or anti-seize agent on precision threads. Temperature range up to +450ºC.
DRY MOLY FLUID A resin bonded, dry film coating of molybdenum disulphide. Developed to lubricate slidingmechanisms such as plain bearings, pins, cams and slides where a wet lubricant cannotbe tolerated. Temperature range up to +450˚C.
MT-LM ASSEMBLY AND RUNNING-IN PASTEA soft, greasy paste with a high content of MoS2 (moly) giving a thin lubricating film whichresists high loads and prevents seizure and galling. Use during the assembly ofinterference fits, also acts as an anti-seize to facilitate dismantling and adjustment.Temperature range up to +450ºC.
OXYLUBE SPRAYAn aerosol applied, thin lubricating film of MoS2 (moly) which is bonded with an inorganicagent. Use particularly in oxygen or vacuum environments or where components may beaffected by chemicals, solvents or petroleum based products. Temperature range up to+450ºC.
Provide either a totally or almost dry thin MoS2 (moly) film ofexceptionally high load carrying strength for application in areaswhere conventional lubricants fail or are inappropriate. Typicallythese products are used to prevent galling and pick up onassembly, to avoid contamination of a finished product or tolubricate in very arduous conditions.
ASSEMBLY / RUNNING IN
DRY FILM LUBRICATION
OXYGEN OR VACUUM ENVIRONMENTS
PRODUCTMETHOD
BRUSH/SWAB MTLM
AEROSOL DRY MOLY SPRAY
AEROSOL DRY MOLY SPRAY
BRUSH/SWAB DRY MOLY PASTE
BRUSH/DIP/SPRAY DRY MOLY FLUID
AEROSOL OXYLUBE SPRAY
16 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
& HYDRAULIC OILSSAPPHIRE COMPRESSOR
Part Code Unit Size
5252552529
5254552549
5255552559
5256552569
5257552579
Viscosity
22
32
46
68
100
20L200L
20L200L
20L200L
20L200L
20L200L
ROCOL manufacture a comprehensive range of compressor andhydraulic oils, which are designed to provide extended service life,thereby reducing maintenance time and costs.
SAPPHIRE HI-POWERA range of quality lubricating fluids, suitable for use in compressor, hydraulic and airlinesystems. Incorporation of the unique L-CO system provides low carry over and enhancedoxidation stability in compressors. In hydraulic systems, the premium quality ensures thefluid does not generate deposits, sludge, and varnish which results from fluid breakdownat high temperatures. Temperature range -20ºC to +120ºC.
Sapphire Hi-Power also meets the following standards:
COMPRESSORS:
DIN 51506 (VBL, VCL, VDL)
ISO/DP 6521 (DAA, DAB, DAH, DAG)
HYDRAULICS:
Vickers 1-286S, M-2950-S
Cincinnati Milacron P-68, P-69, P-70
Jeffrey No. 87
U.S. Steel 127, 136
General Motors LH-04-1, LH-06-1, LH-15-1
Denison HF-1, HF-2, HF-0
Lee Norse 100-1
Ford M-6C32
B.F. Goodrich 0152
17Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
& ANCILLARY PRODUCTSGENERAL PURPOSE
Part Code Unit Size
34295 Aerosol
Part Code Unit Size
34235 Aerosol
Part Code Unit Size
34035 Aerosol
Part Code Unit Size
34331 Aerosol
Part Code Unit Size
34305 Aerosol
Part Code Unit Size
34271 Aerosol
Part Code Unit Size
32030 Aerosol
The ROCOL range of general purpose maintenance products aredesigned to be an easy to use and cost effective part of anymaintenance program.
BELT DRESSING SPRAYA non-toxic colourless fluid designed for the conditioning treatment of all types of driveand conveyor belts. It adheres strongly to any belt material giving instant grip andpreventing slippage, whilst preventing build up of dirt and grease. Temperature range +5˚Cto +100˚C. Food safe - contains only FDA listed ingredients. NSF H1 Registered.
DRY PTFE SPRAYA low friction, non-stick lubricant. For the lubrication of cams, open bearings, and chuteson packaging equipment. Temperature range -200˚C to +270˚C. Food safe - contains onlyFDA listed ingredients. NSF H1 Registered.
PRECISION SILICONE SPRAYA light lubricating film with wide temperature stability. Suitable for use as an anti-stickagent, and for the lubrication of slides, bearings and conveyors. Temperature range -50˚Cto +200˚C. Food safe - contains only FDA listed ingredients. NSF H1 Registered.
SAPPHIRE PRECISION LUBE SPRAYUltra high performance synthetic maintenance lubricant with PTFE. SAPPHIRE PRECISIONLUBE is designed to provide excellent lubrication, penetration and corrosion protection ina wide range of industrial applications. Temperature range -55˚C to +250˚C.
SAPPHIRE SPRAY GREASEMulti-purpose grease for maximum ease of application and convenience. Providesexcellent lubrication and good corrosion protection over a wide temperature range,-50ºC to +200ºC.
WD SPRAYA general purpose, water displacing maintenance penetrant spray. WD Spray provideslight lubrication and a short term corrosion resistant film.
LEAK DETECTOR SPRAYGas leak detection system in aerosol form fitted with a 360˚ valve. Specially formulatedfluid, designed specifically to identify even the smallest, positive pressure, gaseous leak.Leaves a thin uniform film of surface-active agents that accurately identify any leaks orbleeding of joints.
18 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
SEALANTS & PIPE JOINTING
Medium to OILSEAL GASSEAL PIPESEAL SUPER GRAPHITED MANGANESEbe carried LIQUID RED PJC PJC PJC
Steam
Water
Air
Gas
Liquid pet gases
Mineral oils
Petrol
Paraffin
White spirit
Alcohol
Domestic work
Operating Temp -50˚C to 200˚C -20˚C to 125˚C -50˚C to 250˚C up to 250˚C up to 450˚C up to 600˚C
Pressure up to 2000psi test pressure 0.2 bar up to 400psi up to 150psi up to 1400psi up to 2800psi
(dependant on joint fitting)
Part Code Unit Size
28042 300g
Part Code Unit Size
28022 300g
Part Code Unit Size
28032 300g
Part Code Unit Size
30022 375g
Part Code Unit Size
30042 400g
Part Code Unit Size
30051 375g
The ROCOL range of jointing products have been formulated toprovide effective sealing of joints across a wide range ofapplications, reducing leaks and improving efficiency.
GASSEALOff white non-setting jointing compound with good adhesion and gap filling properties.Gasseal is unaffected by vibration but can be easily released. Use on all threaded and facejoints on pipe work carrying natural gas, LPG, air, oils, aliphatic solvents and water.GASSEAL has been independently tested by BSi to BS EN 751-2: 1997 part 2 class B.
PIPESEAL LIQUIDA clean and easy to use alternative to PTFE tape. A white sealant containing finelydispersed PTFE which form flexible pressure tight seals on threaded pipes, lubricatesduring assembly, resists vibration and temperature changes. Suitable for use in a widerange of applications including air, water, gas, oils and commonly used industrial solvents.
OILSEALWhite thixotropic liquid that sets hard to form a pressure tight seal. Resistant to oil andunaffected by vibration. Use to seal threaded and face joints that are subjected to mineraloils, white spirit and paraffin. Also suitable for liquid petroleum gases.
GRAPHITED PJCGrey jointing compound - dries slowly and retains some flexibility, enabling easydismantling of joints and removal for reapplication prior to reassembly. Use forapplications involving high and low pressure air, steam, water and gas.
MANGANESE PJCSoft dark grey jointing compound. Very hard setting and resistant to high temperaturesand pressures. Use for high pressure steam, water, gas and alcohol.
SUPER RED PJCHard setting red jointing compound. Resistant to high pressure yet allows for expansion,contraction and vibration. Use for sealing threaded and face connections for use withLPG, paraffin, white spirit, alcohol and oils.
* * * ** * * ** * * ** * * *****
*
* ****** ** *****
19Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
FOODLUBE PRODUCTS
Part Code Unit Size
1528615284
1527615274
152311523615234
NLGI No.
000
0
2
4kg18kg
4kg18kg
380g4kg18kg
Part Code Unit Size
152511525615254
380g4kg18kg
Part Code Unit Size
15503 525kg
Part Code Unit Size
1522415220
Complete 120mlRefill 120ml
Part Code Unit Size
15910 100ml
Part Code Unit Size
38113 -
Part Code Unit Size
38110 -
BEARING GREASES
FOODLUBE UNIVERSALDesigned for the effective lubrication of all types of ball, roller and plainbearings operating under high loads in the food and other clean industries.Suitable for multi purpose applications and those operating at low or hightemperatures, high loads and those which require high water resistance.Temperature range: -50ºC to +160ºC. NLGI No. 2, 0 and 000.
FOODLUBE HIGH TEMPERATURE GREASE 2A semi-translucent silicone grease, fortified with PTFE. Suitable for the lubrication of alltypes of slower bearings and sliding surfaces operating at high temperatures.Temperature range: -20ºC to +200ºC. NLGI No. 2.
FOODLUBE ENDURE 00A perfluorinated polyether (PFPE) grease, fortified with PTFE. FOODLUBE ENDURE 00 isdesigned for high temperature lubrication of chains, gears, bearings and other slidingsurfaces. It is extremely stable and resistant to chemical attack such as in causticwashing, resulting in greatly extended lubrication intervals.Temperature range: -25ºC to +280ºC.
SAPPHIRE ENDUREA perfluorinated polyether (PFPE) grease, thickened with PTFE. Provides long termlubrication of bearings, slides, small gears, chains and valves operating in aggressiveenvironments such as high temperatures, or where contamination by chemicals or solvents is possible. Temperature range: -25ºC to +280ºC. NLGI 2.
FOODLUBE AUTOLUBE• Simple to install • Fully automatic• Consistent delivery • Up to 1 year automatic delivery
FOODLUBE UNILUBE• Contains FOODLUBE Universal • Significantly extends bearing life• Up to 1 year automatic delivery • Superior resistance to water wash-out• Excellent corrosion protection • Intrinsically safe• Simple to install
CARTRIDGE GUN• High pressure grease gun for use with the standard ROCOL grease cartridge
KEG PUMP• Lever action keg pump for use with the standard ROCOL 18kg grease pail
FOODLUBE...The most effective lubricants in the food chain.
The FOODLUBE range is a comprehensive range of lubricants designed foruse in the food industry. All the FOODLUBE range are formulated usingonly FDA ingredients and meet the requirements of the NSF H1 registrationscheme. All are free from mineral hydrocarbons, nut oils, soya oils, andgenetically modified ingredients.FOODLUBE range meets:• NSF H1 Registration • DIN V 10517 • FDA Group 21 CFR 178.3570
Part Code Unit Size
12330123311233412336
100g700g1kg5kg
20 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
Part Code Unit Size
1550615505
5L20L
Part Code Unit Size
1578615785
5L20L
Part Code Unit Size
15610 Aerosol
Part Code Unit Size
1575015758157531575615751
85g400g500g5kg
Aerosol
Part Code Unit Size
15720 Aerosol
CHAIN LUBRICANTS
FOODLUBE CHAIN FLUIDChain and conveyor lubricant with good load carrying and corrosion preventativeproperties. Suitable for the lubrication of all chains and conveyors. May be used eithermanually or with automatic lubrication equipment. Temperature range: -20ºC to +150ºC.
FOODLUBE OVERHEAD CHAIN FLUIDA highly tenacious product which provides excellent anti-corrosion properties. Particularlysuitable for all types of overhead chains and conveyors operating in wet conditions andapplications where frequent wash downs occur. Temperature range: -20ºC to +150ºC.
FOODLUBE CHAIN SPRAYAerosol applied chain and conveyor lubricant - ideal for the lubrication of all types ofchains and conveyors where the convenience of aerosol application is preferred.Temperature range: -20ºC to +150ºC.
ANTI-SEIZE & ASSEMBLY LUBRICANTS
FOODLUBE MULTI PASTE & SPRAYSuitable for use as an anti-seize, assembly paste, and for lubricating bushes, slides andsmall open gears in the food and other clean industries. Designed to operate across awide temperature range and is particularly suitable for stainless steel fasteners used inhigh temperature applications. Available in a paste or convenient aerosol spray.Temperature range: -30ºC to +450ºC min.
FOODLUBE DISMANTLING SPRAYFast acting penetrating spray - designed to provide fast, effective release of seized andcorroded threaded fasteners. Temperature range: -30ºC to +450ºC min.
21Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
Part Code Unit Size
3100931029
200L1000L
GEAR, COMPRESSOR, AIRLINE& HYDRAULIC FLUIDS
FOODLUBE HI-TORQUE(with SUPS) GEARBOX FLUIDSA range of fully synthetic gearbox fluids for use in food and other clean industries.Contains the unique ROCOL Start Up Protection System (SUPS). SUPS isdesigned to protect gear teeth on start up and provide protection during use.Temperature range -20˚C to +150˚C.
FOODLUBE HI-POWER FLUIDSA fully synthetic range of food quality fluids, suitable for use in compressor, hydraulic andairline systems. Incorporation of the unique L-CO system provides low carry over andenhanced oxidation stability in compressors. In hydraulic systems, the premium qualityensures the fluid does not generate deposits, sludge, and varnish which results from fluidbreakdown at high temperatures. Temperature range -20˚C to +100˚C.
REFRIGERATION COMPRESSOR OILA lubricant designed specifically for use in refrigeration compressors and the arduousconditions that these operate in. Compatible with all common refrigerants, includingammonia, this product exhibits no waxing at -48˚C, ensuring that compressor operation ismaximised.
Part Code Unit SizeViscosity
150
220
320
460
Part Code Unit Size
157961579515799
158961589515899
159961599515999
160061600516009
159461594515949
Viscosity
22
32
46
68
100
5L20L200L
5L20L200L
5L20L200L
5L20L200L
5L20L200L
154261542515429
155261552515529
157661576515769
157761577515779
5L20L200L
5L20L200L
5L20L200L
5L20L200L
22 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
Part Code Unit Size
15710 Aerosol
Part Code Unit Size
1511015116
500ml5L
Part Code Unit Size
34035 Aerosol
Part Code Unit Size
34235 Aerosol
Part Code Unit Size
34295 Aerosol
Part Code Unit Size
34141 Aerosol
GENERAL PURPOSE PRODUCTS
FOODLUBE SPRAYHigh performance versatile lubricant spray - use for all round light-to-mediumlubrication of most moving parts including small bearings and slides. Temperature range -20˚C to +110˚C.
FOODLUBE SUGAR DISSOLVING FLUIDRapidly dissolves and removes sugar and fondant build up from all surfaces. Effectivelyminimises further sugar and fondant residues whilst providing a durable light lubricatingfilm. Available in bulk or a convenient trigger spray. Temperature range +5˚C to +95˚C.
PRECISION SILICONE SPRAYA light lubricating film with wide temperature stability. Suitable for use as an anti-stickagent and for the lubrication of slides, bearings and conveyors. Temperature range-50˚C to +200˚C.
DRY PTFE SPRAYA low friction, non-stick lubricant. For the lubrication of cams, open bearings, and chuteson packaging equipment. Temperature range -200˚C to +270˚C.
BELT DRESSING SPRAYA non-toxic colourless fluid designed for the conditioning treatment of all types of driveand conveyor belts. It adheres strongly to any belt material giving instant grip andpreventing slippage, whilst preventing build up of dirt and grease. Temperature range +5˚Cto +100˚C.
FOAM CLEANER SPRAYUniversal fast acting foaming cleaner cuts through grease, grime and dirt. Free fromchlorinated solvents. NSF A1 Registered.
ELECTRA CLEAN SPRAYA high performance cleaner suitable for electrical components and equipment, includingcontacts, switches, motors and windings. In addition to a high level of cleaning efficiencyELECTRA CLEAN SPRAY will evaporate completely leaving no residue to affectconductivity. Do not use on live or energised equipment. NSF K2 Registered.
FOODLUBE MULTI-LUBEA multi-purpose penetrating lubricant designed to provide extended lubrication intervals.Fortified with PTFE it provides effective lubrication in all areas, particularly for chains,bearings and slides. Temperature range -50˚C to +180˚C.
Part Code Unit Size
34066 Aerosol
Part Code Unit Size
1512015126
500ml5L
23Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
METALWORKING PRODUCTS
Part Code Unit Size
5180451809
60L200L
Part Code Unit Size
5189451899
60L200L
Part Code Unit Size
5188451889
60L200L
Part Code Unit Size
5195451959
60L200L
Part Code Unit Size
5215452159
60L200L
Part Code Unit Size
51949 200L
Part Code Unit Size
51549 200L
Bacteria and fungi are the enemy of metalworking fluids. For generations, chemistsand lubricant technologists have been working to minimise their adverse effects onmetalworking fluids.
ROCOL have taken a new approach, developing a synergistic system of cutting fluid,slideway lubricant and tapping fluid. All 3 work together to maximise metalworkingfluid life and performance.
TRI-Logic SLIDEWAY & HYDRAULIC LUBRICANTThe primary cause of tramp oil is the total loss slideway and hydraulic lubricationsystem incorporated in the majority of modern machine tools. In effect, tramp oilcontamination and poor cutting fluid life are designed in to the machine tool.
TRI-Logic VG68Slideway lubricant that extends tool life. High quality lubricant incorporating special additives which resistmicrobial attack. In addition, these additive transfer into the cutting fluid, actively reinforcing the anti-microbialproperties and extending cutting fluid life.
TRI-Logic VG68 is so unique that world-wide patent protection has been applied for.
TRI-Logic HO32A high performance hydraulic oil for machine tools formulated to minimise the detrimental effects ofhydraulic oil leaks on cutting fluids. Contains special additives that prevent it from being a food source forbacteria. It is also suitable for use in bar feeders requiring a 32 viscosity grade hydraulic oil.
Part Code Unit Size
521235212452129
20L60L200L
24 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
TRI-Logic MAXIMUM LIFE CUTTING FLUIDTRI-Logic cutting fluids are formulated to have maximum resistance tobacteria and fungi attack, and are also protected by effective anti-microbial additives.
TRI-Logic ALMaximum Life Aluminium Cutting FluidAluminium cutting fluid suitable for all operations on aluminium and it’s alloys.
TRI-Logic ALXMaximum Life Cutting Fluid For Roll TappingHeavy duty cutting fluid for roll tapping. Suitable for arduous operations and difficult materials.
TRI-Logic BFMaximum Life Boron & Amine Free Cutting FluidMulti purpose cutting fluid suitable for machining ferrous and non ferrous materials.
TRI-Logic EPMaximum Life Extreme Pressure Cutting FluidHeavy duty cutting fluid suitable for arduous operations and difficult materials.
TRI-Logic FEMaximum Life Cutting Fluid For Ferrous MaterialsMulti purpose cutting & grinding fluid for ferrous materials, especially suited to cast iron.
TRI-Logic MLMaximum Life Cutting FluidMulti purpose cutting fluid suitable for machining ferrous and non ferrous materials.
TRI-Logic RTD
Where used in conjunction with a water mix cutting fluid, tappingfluid creates yet another source of contamination when it is washedfrom the tool and workpiece into the cutting fluid.
In order to avoid providing an additional food source for bacteriaand fungi, TRI-Logic RTD has been formulated using “biologicallyhard” raw materials.
TRI-Logic RTD builds on the well established and market leadingROCOL technology, providing excellent tool life and surface finish.
TRI-Logic RTDTapping fluid that fortifies cutting fluid. Designed to emulsify into water mix cutting fluids,fortifying the extreme pressure cutting properties and enhancing tool life and surfacefinish. It is pleasant to use, low odour and light color and is also water washable. Can beused directly or via automatic applicators in CNC machines.
Part Code Unit Size
530035300653008
350ml5L20L
TAPPING FLUID
SLIDEWAY OIL
CUTTING FLUID
CURRENT PROBLEM
Test slide taken from astandard cutting fluid
showing heavybacterial infection.
Bacteria Test Slide 1
Bacteria feedingon Slideway Oiland Tapping Fluid.
SOLUTION
Same machine using theTRI-LogicTM system has
significantly reducedbacterial growth.
Bacteria Test Slide 2
RTD
Emulsifies andfortifies the EPperformance of thecutting fluid.
VG68
Actively reinforces theanti-microbial propertiesof the cutting fluid.
METALWORKING FLUIDMaximum life cuttingfluid.
25Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
ULTRACUT LONG LIFEMINERAL CUTTING FLUID
The ULTRACUT range of water mix, long life, cutting fluids provideexceptional cutting performance and extended tool life. The rangeincludes products for all metal cutting operations and the majorityof materials.
ULTRACUT 250 PLUSA high quality general purpose water mix cutting fluid designed for light/medium cuttingoperations on ferrous and non ferrous metals. Rejects tramp oil, is low foaming and isideal for companies who are machining a variety of metals.
ULTRACUT 250 HWProvides all of the characteristics of ULTRACUT 250 PLUS for companies operating inhard water areas.
ULTRACUT 255A high performance, extreme pressure, water mix cutting fluid suitable for use inmedium/severe cutting operations. The combination of extreme pressure performance andlong sump life permits increased machining rates and true cost efficiency.
ULTRACUT 255 HWProvides all of the characteristics of ULTRACUT 255 for companies operating in hardwater areas.
ULTRACUT 260Extremely high performance, extreme pressure, water mix cutting fluid designed to providesuperior performance in severe cutting operations. Suitable for a wide range of ferrousmetals including difficult to machine alloys, stainless steel, nickel alloys and titanium.
ULTRACUT 280A PLUSA water mix fluid designed for medium and severe cutting operations when machiningaluminium and its alloys. Compatible with most grades of aluminium and its alloys, it mayalso be used to machine ferrous and non ferrous alloys.
ULTRACUT 280A HWProvides all of the characteristics of ULTRACUT 280A PLUS for companies operating inhard water areas.
Part Code Unit Size
51366513635136251369
5L20L60L200L
Part Code Unit Size
5148351489
20L200L
Part Code Unit Size
51336513335133451339
5L20L60L200L
Part Code Unit Size
5147351479
20L200L
Part Code Unit Size
512635126451269
20L60L200L
Part Code Unit Size
51686516825168151689
5L20L60L200L
Part Code Unit Size
5149351499
20L200L
26 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
ULTRACUT LONG LIFE SEMI-SYNTHETICCUTTING & GRINDING FLUID
ULTRACUT 370 PLUSHigh dilution, semi-synthetic general purpose water mix cutting and grinding fluidformulated to provide optimum performance at high dilutions on a wide range of ferrousand non-ferrous metals.
ULTRACUT 320A high performance, extreme pressure, semi-synthetic water mix product ideal formedium/severe cutting and grinding operations on a wide range of ferrous and non-ferrousmetals.
ULTRACUT 390HA general purpose, semi-synthetic, water mix cutting fluid, with a 40% oil content. Suitablefor light/medium operations on a wide range of ferrous and non-ferrous metals. Provides ahigh level of corrosion protection and has a long and predictable sump life.
ULTRACUT CHLORINE FREE CUTTING FLUID
ULTRACUT 620A chlorine free, high performance, extreme pressure, water mix semi-synthetic productideal for medium/severe cutting and grinding operations on a wide range of ferrous and non-ferrous metals.
Part Code Unit Size
51376513735137251379
5L20L60L200L
ULTRAGRIND PREMIUMA high performance, synthetic grinding fluid with corrosion inhibitors, wetting agents andlubricity additives. Suitable for surface, centreless and cylindrical grinding operations withall types of grinding wheels, wet abrasive belts and cut off wheels. Keeps wheels clean.
ULTRAGRIND 430A general purpose synthetic grinding fluid, suitable for use with all types of grindingwheels. Use for light to medium surface and cylindrical grinding operations.
ULTRAGRIND CARBIDEA general purpose synthetic grinding fluid designed for use with hard metals, especiallytungsten carbide. Designed to minimise cobalt leaching. Suitable for all types of grindingwheels, it can be used for surface, centreless and cylindrical grinding operations.
Part Code Unit Size
5118251189
20L200L
Part Code Unit Size
5150351509
20L200L
Part Code Unit Size
5171351719
20L200L
Part Code Unit Size
5132351329
20L200L
Part Code Unit Size
51296512935129451299
5L20L60L200L
Part Code Unit Size
5138351389
20L200L
ULTRAGRIND SYNTHETIC GRINDING FLUID
27Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
CUTTING FLUID SELECTION CHART
28 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
CU
TT
ING
MIL
D S
TEE
L
ME
DIU
M C
AR
BO
N S
TEE
L
HIG
H C
AR
BO
N S
TEE
L
STA
INLE
SS
STE
EL
NIC
KE
L A
LLO
YS
TITA
NIU
M
ALU
MIN
IUM
YE
LLO
W M
ETA
LS
CA
ST
IRO
N
MA
GN
ES
IUM
PLA
STI
CS
***
** * * * * ** ** ** * ***
***
** * * * * ** ** ** * ***
***
***
***
***
** ** ** ** ** * ***
***
***
***
***
** ** ** ** ** * ***
***
***
***
***
***
***
** ** ** * ***
***
** * * * * ***
***
** * ***
***
** * * * * ***
***
** * ***
***
** * * * * ** ** ** ** ***
***
** * * * * ** ** ***
** ***
***
***
***
***
***
***
** ** ** * ***
***
***
***
***
***
***
** ** ** ** ***
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
***
** * * * * ** ** ** ** ***
***
***
***
***
***
***
** ** ** ** ***
***
** ** ** ** ** ***
*** * * ***
***
** * * * * * ** ** ** ***
ULTR
ACUT
250 P
LUS
ULTR
ACUT
250H
WUL
TRAC
UT25
5UL
TRAC
UT25
5HW
ULTR
ACUT
260
ULTR
ACUT
280 P
LUS
ULTR
ACUT
280A
ULTR
ACUT
370 P
LUS
ULTR
ACUT
390 H
ULTR
ACUT
320
ULTR
ACUT
620
ULTR
AGRIN
D430
ULTR
AGRIN
DPR
EMIUM
ULTR
AGRIN
DCA
RBIDE
TRI-L
ogic
MLTR
I-Log
icEP
TRI-L
ogic
ALX
TRI-L
ogic
BF
SOLU
BLE
OIL
- R
EJEC
TS T
RA
MP
OIL
SEM
I-SY
NTH
ETIC
EMU
LSIF
IES
TRA
MP
OIL
SYN
THET
IC F
LUID
SEM
I-SY
NTHE
TIC
CHLO
RINE
FREE
***
OP
TIM
UM
PE
RFO
RM
AN
CE
**V
ER
Y G
OO
D P
ER
FOR
MA
NC
E*
GO
OD
PE
RFO
RM
AN
CE
~N
OT
NO
RM
ALL
Y R
EC
OM
ME
ND
ED
GR
IND
ING
LIG
HT
/ M
ED
IUM
DU
TY
ME
DIU
M /
HE
AVY
DU
TY
TUN
GS
TEN
CA
RB
IDE
~ ~ ~
~ ~ ~
~ ~ ~
~ ~ ~
~ ~ ~
~ ~ ~
~ ~ ~
** * ~
** * ~
** * ~
** * ~
***
** ~
***
*** ~
***
***
***
** * ~
***
** * * * * * ** ***
** ***
TRI-L
ogic
FE ** * ~
** * ~
~ ~ ~
***
** * * * * ***
*** * * ***
TRI-L
ogic
AL ~ ~ ~
~ ~ ~
ULTRAGUARD MACHINE TOOL CARE
Good machine tool care can contribute significantly towardsgreater efficiency and overall cost savings. The ULTRAGUARDrange of Machine Tool Care products are designed to complementthe ULTRACUT and ULTRAGRIND range of metal cutting andgrinding fluids and enable easy care and maintenance of machinetools.
ULTRAGUARD SC SYSTEM CLEANERA system cleaner for use with water-mix cutting and grinding fluids. Specially designed foruse prior to recharging machine tools with fresh cutting or grinding fluid. Cleans anddisinfects in one operation. May be used in the existing fluid whilst the machine is inoperation.
ULTRAGUARD PF PURGING FLUIDA purging fluid specially formulated to clean and disinfect the most heavily contaminatedmachine tool sumps. Use to clean out the system prior to refilling with new fluid.
ULTRAGUARD BX BACTERICIDEA biocide additive that can be safely used with all water mix, semi-synthetic and syntheticwater mix products. Designed to provide long lasting protection against bacterialcontamination.
ULTRAGUARD FX FUNGICIDEA fungicidal additive that can be used with all types of cutting and grinding fluids.Formulated to eliminate fungal spores and prevent the formation of fungal growth.
ULTRAGUARD AF ANTI-FOAMA non-silicone anti-foam designed for the treatment of synthetic, semi-synthetic and watermix cutting and grinding fluids. Effectively controls excessive foaming.
ULTRAGLIDE SLIDEWAY LUBRICANT
ULTRAGLIDE X5Provides excellent lubrication and corrosion protection for machine tool slideway systems.Designed to prevent “stick slip”. ISO VG68. Contains excellent demulsification properties.
ULTRAGLIDE SPRAYProvides excellent lubrication and corrosion protection for machine tool slideway systems.
Part Code Unit Size
520245202652023
1L5L20L
Part Code Unit Size
52056 5L
Part Code Unit Size
52084 1L
Part Code Unit Size
52094 1L
Part Code Unit Size
52074 1L
Part Code Unit Size
520865208352089
5L20L200L
Part Code Unit Size
52041 Aerosol
DILUTION CONTROL
AUTOMATIC FLUID MIXERAccurately mixes and dispenses water mix cutting and grinding fluids from the 200 litre barrel.
REFRACTOMETERProvides accurate read out (strength/mix ratio) of water mix cutting and grinding fluids.
Part Code Unit Size
52233 -
Part Code Unit Size
52060 -
29Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
RTD HAND APPLIED CUTTING LUBRICANTS
RTD can double tool life when compared to conventional handapplied cutting lubricants.
The RTD range of hand applied metal cutting lubricants have beendeveloped to provide maximum lubrication between workpiece andtool, reducing cutting forces and wear. The use of a RTD productwill help reduce tool wear, improve surface finish and increasemetal removal rates on even the most difficult to machine metalsincluding stainless steel, titanium and nickel alloys.
RTD LIQUIDA viscous fluid containing extreme pressure additives for use in reaming, tapping, drillingand other metal cutting operations. Suitable for all metals including hardened steels,titaniums and nickel alloys. This product significantly reduces friction giving superb cuttingperformance. Can be used in automatic applicators on CNC machines.
RTD COMPOUNDA soft melting paste containing extreme pressure additives for use in reaming, tapping,drilling and other heavy duty metal cutting operations. Suitable for all metals includinghardened steels, titaniums and nickel alloys. It has been formulated to cling to the toolthus providing the ultimate in cutting performance. This product significantly reducesfriction giving superb cutting performance.
RTD SPRAYAll the performance of RTD Liquid in an aerosol. Particularly suitable for use during thecutting operation, or where accessibility is a problem.
RTD FOAMCUTA high performance aerosol applied cutting foam lubricant that clings to the workpieceensuring excellent penetration. Suitable for application to less accessible cutting edges.
RTD CLEANCUTA clean, oil and sulphur free, hand applied metal cutting lubricant that has been designedto provide improved cutting performance in most metal cutting operations. It emulsifieswith water mix cutting fluids and can improve their performance. Ideal for automaticapplication on CNC machines and use with stainless steel metals.
RTD CHLORINE FREEThe RTD chlorine free range of products have been specifically developed to satisfy everincreasing environmental, and health and safety needs in today’s markets.
These products meet the same exacting performance standards as the standard RTDrange.
Part Code Unit Size
53072530765307853079
400g5L20L200L
Part Code Unit Size
5302053023530265302853029
50g500g5kg18kg185kg
Part Code Unit Size
53011 Aerosol
Part Code Unit Size
53041 Aerosol
Part Code Unit Size
5306253066
350g5L
Part Code Unit Size
5352153526
5351353516
53081
Product
Liquid
Compound
Spray
350ml5L
450g4.5kg
Aerosol
30 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
LAYOUT INKS
LAYOUT INK SPRAY & FLUID (BLUE/WHITE)Rapid drying metal marking inks - which will not crack or flake and are resistant to washing offby water mix cutting fluids. Use for marking out of all metals prior to machining. White fordark surfaces; blue for bright surfaces.
Part Code Unit Size
57015 (Blue)57025 (White)
57034 (Blue)57044 (White)
AerosolAerosol
1L1LSPATTER RELEASE
Designed to prevent the adhesion of molten weld spatter.
SPATTER RELEASE SPRAYNon-silicone, heat resistant barrier film. Non corrosive and will not interfere with weldformation. Easily cleaned with a cloth and does not affect subsequent galvanising orpainting operations.
SPATTER RELEASE FLUID OIL FREEWater based spatter release where oil containing products cannot be permitted. Does notaffect any subsequent galvanising or painting operations and components can be paintedwithout cleaning
WELDMATE SPATTER OFF SPRAYWater based spatter release where oil containing products cannot be permitted. Does notaffect any subsequent galvanising or paint operations. Components can be painted afterwipe-down with a cloth.
FLAWFINDER CRACK DETECTIONNon-destructive inspection system designed to provide a fastreliable method for visual detection of cracks or flaws not normallyvisible to the naked eye.
FLAWFINDER CLEANER SPRAYUse to clean areas for inspection and to remove excess penetrant.
FLAWFINDER DYE PENETRANT SPRAYHigh sensitivity dye for detecting cracks and flaws under normal light.
FLAWFINDER DEVELOPER SPRAYA fine white powder film which gives precise definition to the faults highlighted bythe dye penetrant.
Part Code Unit Size
66080 Aerosol
Part Code Unit Size
6607066096
500ml5L
Part Code Unit Size
66145 Aerosol
Part Code Unit Size
63125 Aerosol
Part Code Unit Size
63151 Aerosol
Part Code Unit Size
63135 Aerosol
MOULD RELEASE PRODUCTS
Part Code Unit Size
72015 Aerosol
Part Code Unit Size
72021 Aerosol
Part Code Unit Size
72035 Aerosol
Mould release agents offering high performance, economy andversatility in the release of all types of plastic and synthetic rubbersin injection and compression mouldings.
PR SILICONE RELEASE SPRAYWet film silicone release agent. Suitable for blow, flow, injection and compressionmoulding operations. Suitable up to 200˚C.
MOULD RELEASE SPRAYNon-silicone dry film PTFE release agent. Designed for all plastics and rubbers and formoulding parts that will be over printed or painted. Particularly suited for high speedproduction. Suitable up to 270˚C.
RS7 SPRAYWet film, non-silicone release agent. Particularly suitable for delicate or intricate plasticcomponents. Suitable up to 150˚C.
31Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
ULTRAFORM COLD METAL FORMING
The ULTRAFORM range of cold metal forming lubricants have beendeveloped to provide extended tool life, prevent metal pick up andscoring and increase production rates.
All the products in the range are suitable for blanking, piercing andforming of difficult materials in complex and severe shapes.
ULTRAFORM 1030A high performance cold metal forming lubricant developed for general purpose useacross a wide range of applications. Suitable for use on stainless steel and a wide rangeof ferrous and non-ferrous metals including titanium and nickel alloys. Use neat or dilutewith mineral oil.
ULTRAFORM 1050High performance, light viscosity cold metal forming lubricant - designed for use withferrous and non-ferrous metals including galvanised and zintec coated steels. Works as avanishing film, eliminating the need to degrease components in some circumstances.Neat-use as supplied.
ULTRAFORM 1060Light duty, very fast drying cold metal forming lubricant - designed for use with ferrousand non ferrous metals including galvanised and zintec coated steels. Works as avanishing film, ultra light film eliminates need to degrease in some circumstances.Neat-use as supplied.
ULTRAFORM 2010A water mix product designed for the most severe cold metal forming operations.Particularly suitable for use on heavy gauge ferrous and non ferrous metals includingstainless steel, titanium and nickel alloys.
ULTRAFORM 2030General purpose, high performance, water mix cold metal forming lubricant suitable foruse with medium/light gauge metals including titanium, nickel alloys, stainless steel, zincand aluminium. Suitable for some heavy duty operations when used neat.
ULTRAFORM 2530General purpose, high performance chlorine free, water mix cold metal forming lubricant.Suitable for light/medium duty forming operations on ferrous and non-ferrous metals.Suitable for some heavy duty operations when used neat.
ULTRAFORM ADVANTAGEA high performance chlorine free product which provides outstanding economy in use andminimal scrap. For the most difficult operations, the product should be used undiluted toprovide the highest levels of performance. Where economy is required the wide dilutionrange enables the product to be extended using either oil or water. Suitable for someheavy duty operations when used neat.
Part Code Unit Size
8608386089
20L200L
Part Code Unit Size
8610386109
20L200L
Part Code Unit Size
8621386219
20L200L
Part Code Unit Size
8604386049
20L200L
Part Code Unit Size
8601386019
20L200L
Part Code Unit Size
8623386239
20L200L
Part Code Unit Size
8627386279
20L200L
32 Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700
FORMING LUBRICANT SELECTION CHART
BLANKING
PERFORATING
DRAWING
EXTRUDING
FORMING
PIERCING
SWAGING
SPINNING
LAMINATING
********
******
******
***
**
******
***
***
*******************
*****************
*
***
********************
*******************
*
***************
*
EXTRA SEVERE
SEVERE
HEAVY
MEDIUM
LIGHT
ULTRAFORM1030
ULTRAFORM1050
ULTRAFORM1060
ULTRAFORM2010
ULTRAFORM2020
ULTRAFORM2030
ULTRAFORMADVANTAGE
ULTRAFORM2530
NEAT OILS WATER EXTENDIBLES CHLORINE FREEWATER EXTENDIBLES
*** EXCELLENT PERFORMANCE ** VERY GOOD PERFORMANCE * GOOD PERFORMANCE ~ NOT NORMALLY RECOMMENDED
LUBE-SYSTEM
ROLLER COAT
DRIP
FLOOD
MANUAL
STEEL
STAINLESS
ALUMINIUM
COPPER
BRASS
ZINC
NICKEL ALLOY
TITANIUM
~ ~ ~
** ~~~
*~~
~~ ~ ~
~
✦
ALKALI
VAPOUR
✸ DENOTES ACCEPTABLE BUT REFER TO DATA SHEET FOR DILUTION RATIOS
✓ DENOTES SUITABILITY ✗ DENOTES NOT SUITABLE
~
DUTY
TYPE OF METAL
OPERATION
DENOTES ACCEPTABLE
APPLICATION METHOD
CLEANING
✦ ✸ ✸ ✸
✦ ✸
✓
✓
✓
✓
✓
✓
✓
✓
✗
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ ✓ ✓ ✓
✓
✓✗ ✗
✗
✗ ✗
✓ ✓ ✓ ✓ ✓ ✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✸ ✸ ✸ ✸
✸ ✸ ✸ ✸✦
✦ ✦ ✦ ✸ ✸ ✸ ✸ ✸
✦ ✸
✸
✸
✸ ✸
✦ ✦ ✦ ✸
✸
✸
✸
✸
✸
✸
✸
✸
✸✸
✸
✸
✸✦ ✦
✦ ✦
✦ ✦✦
✦ ✦
✦
✦
✦
✦ ✦ ✸
✸
33Technical assistance contact: Email: [email protected] Tel: +44 (0)113 232 2700