Product Applications - hgsitebuilder.com

Gauge MEASURE EVERY MOMENT

Product Applications 2015

Feature Highlights

- 10 year data-logger

- Real-time performance meter

- Renewable energy measurement

- Store 64 data points

- Connect up to 12 CTs

- Direct Inverter Connect (ABB)

- Ethernet & Wireless Version

- Zero Export Integration

Data Logger

Web Server

The eGauge 3 Series combines an energy meter, data logger, and web server into one

ANSI C12.1 (1%) & ANSI C12.20 (0.5%)

Energy Meter

Gauge MEASURE EVERY MOMENT

Standard CT Install

e-Gauge 3000 - Ethernet Standard Configuration Grid – 3 Phase CT1 – CT2 - CT3 Solar either direct connect or via CT’s Amps Phase 1 , 2 & 3 Volts Red, White & Blue KVA - Grid Power Factor THD CT1(Total Harmonic Distortion) Selected Harmonics CT1

The e-Gauge can be installed pre- and post-installation to measure relevant meter information for Pre and Post commissioning reports for the power companies.

e-Gauge 3000W – Wireless TP Link Wireless Router (TL-WR702N) ZTE WIFI 3G Modem (ZTEPB) (optional)

Integrated Zero Export with e-Gauge

Ethernet Install Zero Export by S

Standard Configuration ABB Integration with e-Gauge Grid – 3 Phase CT1 – CT2 - CT3 Solar either direct connect or via CT’s Amps Phase 1 , 2 & 3 Volts Red, White & Blue KVA - Grid Power Factor THD CT1(Total Harmonic Distortion) Selected Harmonics CT1

The e-Gauge can be installed pre- and post-installation to measure relevant meter information for Pre and Post reports for the power companies.

Install Inclusions – Ethernet Version 64 Register E3000 e-Gauge RS485 Converter - PMU 3 x Secondary 5 amp CT’s 4 Port Ethernet hub Cat 5 RS485- Hub PMU to RS85 wiring 5 Volt Power Supply

Split Core CT’s 50 - 800 amp

3 Phase CT 1 - Red CT 2 - White CT 3 - Blue CT 4 - Solar + upto 8 other CT’s for other circuits

Single Phase CT 1 - Red CT 2 - White CT 4 - Solar + upto 9 other CT’s for other circuits

Gauge MEASURE EVERY MOMENT

Wireless Install Zero Export by S

Standard Configuration ABB Integration with e-Gauge Grid – 3 Phase CT1 – CT2 - CT3 Solar either direct connect or via CT’s Amps Phase 1 , 2 & 3 Volts Red, White & Blue KVA - Grid Power Factor THD CT1(Total Harmonic Distortion) Selected Harmonics CT1

The e-Gauge can be installed pre- and post-installation to measure relevant meter information for Pre and Post reports for the power companies.

Config A - Wireless Version Install Inclusions Zero Export Device – ABB Inverter Version 64 Register E3000 e-Gauge RS485 serial converter to PMU 3 x Secondary 5 amp CT’s 4 Port Ethernet Wireless Hub Cat 5 RS485- Hub PMU to RS85 wiring harness (e-Gauge uses the PMU wireless network)

Config A - Remote Inverter Location RS485 serial converter to Wi-Fi Bridge 5 Volt Din Rail Power Supply IP65 wall mounted enclosure RS485 If more than one remote inverter location multiple kits required.(recommended up to 10 remote inverter locations)

- Config B - Wireless Version Install Inclusions Zero Export Device – Non ABB Version 64 Register E3000 e-Gauge RS485 serial converter to PMU 3 x Secondary 5 amp CT’s 4 Port Ethernet Wireless Hub IP65 Ethernet Wireless Hub Enclosure Cat 5 RS485- Hub wiring harness PMU to RS85 wiring harness

Config B - Remote Inverter Location

64 Register E3000 e-Gauge (Extra e-Gauge may be

required will depend on Inverter type please ask)

Inverter Connection or CT’s to Suit RS485 serial converter to Wi-Fi Bridge 5 Volt Din Rail Power Supply IP65 wall mounted enclosure RS485 If more than one remote inverter location multiple kits required. (Recommended for up to 10 remote inverter locations)

Gauge MEASURE EVERY MOMENT

Software Interface

e-Gauge 3000 – Standard Interface

e-Guard Manager e-Guard is an administrative management system for e-Gauge devices that allows an individual to monitor and manage multiple e-Gauge systems from a single web interface.