8/14/2019 Product Advantages Mobile Crane LTM 1150/1
1/5
The better crane.
Product advantagesMobile crane LTM 1150/1
Max. lifting capacity: 150 t at 3 m radiusMax. height under hook: 91 m with swing-away jiband extended telescopic boomMax. radius: 74 m with swing-away jib
Performance profile of the LTM 1150/1 at a glance.b Rapid-cycle telescoping system Telematik with
patented internal interlocking system, fully automaticor manual telescoping is practicableb LICCON, the most modern crane computer system world-
wide, with comprehensive informative, monitoring andcontrol functions
b Diesel engines, slewing rim, slewing gear, winches andhydraulic pump are self-manufactured, quality checkedcomponents
b The LTM 1150/1 is manufactured by Liebherr withinthe scope of a quality assurance system according toDIN ISO 9001
b Outstanding range of lifting capacities, counterweight
variants 5 t, 7 t, 15 t, 25 t, 35 t and 50 tb Powerful, emission-optimized Liebherr turbo-chargedDiesel engine of 400 kW/544 h.p. (Euro III)
b 5-axle carrier, compact and manoeuvrable due to all-wheel steering, smallest turning radius 10.2 m overvehicle
b 6-section, 12.6 m 56 m long telescopic boom withprismatical, particularly buckling resistant boom profile
b 3-section, 12,5 28 m long biparted swing-away jib,mountable at 0, 20 and 40, hydraulic rigging aid
b Telescopic boom extension with 7 m long lattice section,max. height under hook with biparted swing-away jib91 m
8/14/2019 Product Advantages Mobile Crane LTM 1150/1
2/52
700
The new LTM 1150/1 more benefitthrough advanced technology.
Compact, manoeuvrable andweight-optimized.G Overall length 14.95 m, length of carrier just 12.67 mG Large overhang angles of up to 23 at vehicle front
and rearG Smallest turning radius of 10.2 m over vehicle with all-
wheel steeringG 60 t total weight, incl. 7 t counterweight, drive 10 x 8,
TELMA type eddy current brake (optional) tyre size 16,50 t hook block (axle load 5 x 12 t)
G 2 optional tyre sizes
14.00 R 25 - vehicle width 3 m16.00 R 25 - vehicle width 3 m
Variable drive and steeringconceptG Drive 10 x 6, axles 1, 4 and 5 driven, at road travel 4th
and 5th axle driven, 1st axle activatable for off-roadoperation
G Drive 10 x 8 (optional), axles 1, 2, 4 and 5 driven, axles4 and 5 driven at road travel, 1st and 2nd axle activatablefor off-road operation
G Standard all-wheel steering, 4th and 5th axle steerableindependent of axles 1, 2 and 3 (crab steering). Theadditional hydraulic steering is locked mechanicallyfor road travel
G ZF-semi-integral power steering with 3 hydraulic pumps(dual circuit system)
Setting crane on outriggers -quick, convenient and safeG Variable supporting basis
Outriggers retractedSupporting basis 5 m x 8.16 mSupporting basis 7.5 m x 8.16 m
G Fix-mounted supporting pads, protected by splashguards, weight 40 kg
G Travel of supporting rams 700 mmG 2 x 9 lateral inclination of chassis and crane
superstructureG Electronic inclination displayG Supporting pressure control within the cab and at the
carrier (optional)G Illuminated and dirt-protected reflecting levelsG Operation of outrigger system in accordance with the
rules for the prevention of accidents
14.95
4.
00
2323
2.2614.93
8.16
600
3.
00
5.
00
7.
50
R=8.62
R=10.20R=
R=3.9
R=11.86
12.67
12 t 12 t 12 t 12 t 12 t16.00 R 25
16.00R25
8/14/2019 Product Advantages Mobile Crane LTM 1150/1
3/5
8/14/2019 Product Advantages Mobile Crane LTM 1150/1
4/5
F 1 F 2 F 3 F 4 F 5 F 6 F 7 F 8
LICCONLI EBHERRCOMPUTEDCONTROLLING
LIEBHERR-WERK EHINGEN
LIEBHERR
ENTER
>>
7 8 9
4 5 6
1 2 3
0 P
F4
K
iC
Lifting loads - precise and safeb 6-section, 56 m long telescopic boom, with folded,
prismatical bottom shell, of high lateral rigidityb Optimal utilization of the telescopic boom through a
multitude of telescoping variantsb Biparted swing-away jib, mountable at 0, 20 and 40,
hydraulic rigging aidb Telescopic boom extension 7 m, thus a 7 m higher fixing
point of the swing-away jibb The LICCON system always calculates the optimal load
capacity values at any boom length
b Easy and quick re-reeving of the hoist rope due to amodern self-locking rope dead end connection
LICCON-assisted telescopingsystemb Telescoping by means of a single action hydraulic ram
with pneumatic operated driving pins, patented internalinterlocking system
b Telescoping procedure controllable on the LICCONmonitor, convenient operators guide, precise approachof interlocking positions
bTelescopable loads are displayed in the LICCONoperating image
b Rapid-action telescoping system Telematik for fullyautomatic telescoping to the desired boom length
b Particularly light-weight telescoping system, thusincrease of lifting capacities, especially with long boomsand at large radii
b Automatic cushioning in end positions duringtelescoping and retracting for the preservation of thestructural members
LICCON computer with SLI, test
system and PLC controlb Setting of crane configuration by convenient
conversational mode functionsb Reliable acknowledgement of the adjusted crane
configurationb Representation of all essential data by graphic symbols
on the operating imageb Integrated wind speed control (optional)b Reliable cut-off device in the event of exceeding the
permissible load momentsb Load capacity values for any intermediate boom lengthb Winch indications for load hook course with zero adjuster
for ultra-precise lifting/loweringb Test system for servicing, offering the facility to check
all sensors within the system on the monitor
b Convenient programmable logical control (PLC) forlifting/lowering, slewing, luffing and telescoping
52.5m
48.5m
44.5m
56m
K28m
12.6m
20
40
oval cross-section
7m
8/14/2019 Product Advantages Mobile Crane LTM 1150/1
5/5
HW 1 HW 2
Please contactLIEBHERR-WERK EHINGEN GMBH, Postfach 1361, D-89582 EhingenPhone (0 73 91) 5 02-0, Telefax (0 7391) 5 02-33 99www.lwe.liebherr.de, e-mail: [email protected]
Subject to modification. TP 319.3.01
Electric/electronic PLC crane control withintegrated safe load indicatorb Control of winches, slewing gear as well as of luffing
and telescoping motions via LICCON system (PLCcontrol)
b Summation regulated control, i.e both pumps can beswitched to one consumer
bLoad sensing system with electric activation, fourworking motions can be controlled indepent of oneanother
The counterweight system formore flexibilityb Counterweight variants 5 t, 7 t, 15 t, 25 t, 35 t and
50 t offer a large application spectrumb Control of ballasting from the crane cab without the
assistance of a stand-by craneb Ballasting rams fix-mounted to the superstructureb Compact counterweight dimensions, e.g. 35 t
counterweight of only 3 m width
3.
0
7.5 t
7.5 t
R=4.1
R=4.1
8
5 t
10 t
10 t
8 t
2 t
b High-speed activation also possible during a workingmotion
b Speeds of hoisting/lowering, luffing and slewing arepreselectable by 6 steps
b Extremely short reaction times at the selection of
working motionsb Functional test of all essential components by meansof the test system
Liebherr-hoist winch
LICCONdisplay
LICCON
control
luffing ramsingle-stagetelescopingram withhydraulicinterlockingdevice
control levers
Liebherr double variabledisplacement pump
LiebherrDiesel engineD 924 TE
transmitters,
sensors
Liebherr-slewing gear
fixed displacementdouble pump
control block
5.
3