~Shave the dowels, and sand dowels to join the dowels/ marked for pig’s eyes~ Monday 16/05/11 Today I did lots of work. First, I used sharpener to shave edge of dowels. It makes easier to join the dowels and pig’s back together. Second, I put glue inside of dowels, use tiny wood stick to spread out the glue that inside of holes, and I used wooden mallet to hit it. I thought it is going to be fit now, because I shaved edge of dowels, so it is easier to joint together. But actually it doesn’t fit. This is because the dowels heights are not same (Not same size). So Mr. Anderson used disk sander and sand dowels to make dowels heights all same. Third, we used G clamps to fix my toy, and make sure I need to put dowels inside of holes. During this my toy got crack, so I need to fix that. I used glue and wet cloth to fix it. Fourth, I put my toy on the desk and use wooden mallet to hit it. Finished joining together!! Five, I put glue inside of holes, and then use tiny stick to spread out the glue. Sixth, I brought different colors of felt for choose which felt is going to be use for pig’s nose. I chose light pink. First time I was going to use skin color, because it match with Use sharpener to shave dowels After shave the dowels