PROBLEMS FACING IN PROJECT •We are getting the temperatures of the Heatsink in the desired range. •The problem we are facing is, SMPS (750W)is not getting meshed if I keep it as Hollow block and add openings or grille on either sides to pass the air flow through it. •See the attached image for better understanding. •Error is being displayed when openings or grille created on GPU (175W). “ Mesh not created on GPU Body”, but if we don’t create openings or grille, temperate is too high. •Please help us to resolve these two issues, so that SMPS and GPU temperature is in range
Problems Facing in EP Project
Sep 25, 2015
general Problems faced during projects
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PROBLEMS FACING IN PROJECT
PROBLEMS FACING IN PROJECTWe are getting the temperatures of the Heatsink in the desired range.The problem we are facing is, SMPS (750W)is not getting meshed if I keep it as Hollow block and add openings or grille on either sides to pass the air flow through it.See the attached image for better understanding.Error is being displayed when openings or grille created on GPU (175W). Mesh not created on GPU Body, but if we dont create openings or grille, temperate is too high.Please help us to resolve these two issues, so that SMPS and GPU temperature is in range
Related Documents
