Problem : Water leakage from Selector switch “ Auto drain and high Cool Knob” Reason of water Leakage: Water falling directly on drain assy. from wood wool pad (Design constraint). Do not replace assy. drain valve, no problem related to this part. Product : Cooler, Model : Wondercool Super, Maxocool Super Water falling directly on Drain Assy.
3
Embed
Problem : Water leakage from Selector switch “ Auto drain and high Cool Knob”
Product : Cooler, Model : Wondercool Super, Maxocool Super. Problem : Water leakage from Selector switch “ Auto drain and high Cool Knob”. Reason of water Leakage: Water falling directly on drain assy. f rom wood wool pad (Design constraint). - PowerPoint PPT Presentation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Problem : Water leakage from Selector switch “ Auto drain and high Cool Knob”
Reason of water Leakage:
Water falling directly on drain assy. from wood wool pad(Design constraint).
Do not replace assy. drain valve, no problem related to this part.
Product : Cooler, Model : Wondercool Super, Maxocool Super
Water falling directly on Drain Assy.
Required Material for modification : 1. Modified retainer (Plastic collar cut at center) – Prepare
at workshop2. Elphy, Fevi kwik, Loctite - Buy it from market3. Plastic sheet ( 11(L) cm x 4(W)cm) – Buy it from market4. Cutter
Modification Procedure : 5. Open Back cover & remove Pad retainer of right
side (Above drain Assy.)6. Use modified side pad retainer or Cut side pad
retainer at customer location as shown in fig.7. Apply adhesive (Fevi kwik ) on side grill as shown
in picture8. Place plastic sheet on the adhesive & press properly for 1-2 min.5. Re-assemble the wood wool & retainer6. Check by putting water on side pad whether water
is leaking or not from drain selector knob. 7. If no water leakage ,close back cover and Test the
set with water.
Product : Cooler, Model : Wondercool Super, Maxocool Super
1 2
Apply Adhesive here
3Place plastic sheet
4
Plastic sheet11 (L)cm x 4(W)cm
Modified Pad retainer
Fevi kwikCutter
Precautions:1. For leakage issue from drain selector switch do not replace assy. drain valve.2. Cut side pad retainer at customer location3. Carry fevikwik.
Product : Cooler, Model : Wondercool Super, Maxocool Super
Water falling directly on Drain Assy.
Proposed Counter measures/suggestions to factory1. Check possibility of change of position of drain selector knob position from side
cabinet to front cabinet if not then point no 2 to be considered.2. Do mould modification in pad retainer so that water does not fall does not fall on
assy. drain valve.3. Drain plug to be provided with thread or chain so that it always remains fixed with