PRO II & PRO IV 2 Roll & 4 Roll Wire Feeders The “PROFAX” PRO SERIES semiautomatic wire feeders are designed for use with numerous manufacturers welding power sources and are powered by 24 Volt AC for operator safety. The PRO SERIES is designed to give operator comfort with its ease of access to the wire drive, large wire speed knob and lighted power switch. A powerful 65 Watt motor is controlled by a PWM totally solid state circuit that gives a true constant wire speed by compensating for variations in line voltage and torque loads. The PRO SERIES will accommodate wire spools up to 44 lbs. and wire sizes of .023 through 1/16 in. with a wire speed range of 30 to 650 IPM. Both upper and lower drive rolls are geared together to give maximum wire drive, and a hinged cover protects the drive from contaminants. Although the PRO SERIES is designed to operate off of 24 volt AC, with the use of the optional internally mounted 115/24 VAC transformer, it can also be used with power sources having only 115 volt AC power. A 24V AC POWERED CONSTANT SPEED WIRE FEEDER FOR GAS METAL- ARC WELDING WITH HARD & CORED WIRES SPECIFICATIONS PRO II 24 Volts AC Length - 20” Length - 22¼” 28 lbs. (12.7 Kg ) 30 lbs. (13.6 Kg ) PRO IIx 7 Amps .023 - 1/16” 30 - 650 IPM Width - 10” Width - 10” PRO IV 50/60 Hz. Height - 11” Height - 11” 30 lbs. (13.6 Kg ) 32 lbs. (14.5 Kg ) PRO IVx * Add 4 lbs. (1.8 Kg ) if optional 115 / 24V Transformer (P/N PX9045) is factory installed. PROFAX NO. INPUT POWER WIRE CAPACITY WIRE SPEED PRO STD. DIM. X EURO DIM. NET WT.* SHIP WT.* Standard Connection DRIVE ROLL KITS - Euro-Quick Series PRO IIx The PRO II & PRO IV will accept the standard ® “PROFAX” or TWECO style mig guns. The PRO IIx & PRO IVx will accept the Euro-Quick style mig guns. STANDARD FEATURES • Low voltage - operates off 24 VAC • PWM - totally solid state drive circuit • Pressure arms spring up and out of way • 65 Watt - permanent magnet motor • Both upper and lower feed rolls drive the wire • Calibrated wire tension adjustment OPTIONS • Internally Mounted 115 VAC transformer • Control cords available for all types of power sources. Euro Connection DRIVE ROLL KITS - Standard Series PRO II PRO IV PRO IVx 110 1 Standard - Flat Pressure Rolls (P/N 9052) are supplied with feeder. 2 Optional - Flat, Knurled Pressure Rolls (P/N 9053) are recommended when using hard shelled cored wires. 3 Add an “ X ” to the part number to indicate PRO IIx or PRO IVx. 1 V - GROOVE PRO II PRO IV DRIVE INLET STD. OUTLET EURO OUTLET INTER. FOR HARD WIRES KIT NO. KIT NO. TYPE ROLL GUIDE GUIDE GUIDE GUIDE 3 3 3 3 3 .023/.025 (.6mm) 9095 9110 V 9054 9070 9080 9085x 9131 3 3 3 3 3 .030 (.8mm) 9095 9110 V 9054 9070 9080 9085x 9131 3 3 3 3 3 .035 (.9mm) 9096 9111 V 9055 9071 9081 9086x 9131 3 3 3 3 3 .045 (1.2mm) 9097 9112 V 9056 9071 9081 9086x 9131 2 V - KNURLED FOR CORED WIRES 3 3 3 3 3 .030 (.6mm) 9098 9113 VK 9057 9070 9080 9085x 9131 3 3 3 3 3 .035 (.9mm) 9099 9114 VK 9057 9071 9081 9085x 9131 3 3 3 3 3 .045 (1.2mm) 9100 9115 VK 9058 9071 9081 9086x 9131 3 3 3 3 3 .052 (1.4mm) 9101 9116 VK 9059 9072 9082 9087x 9131 3 3 3 3 3 1/16 (1.6mm) 9101 9116 VK 9059 9072 9082 9087x 9131 Aluminum Case Aluminum Case
3
Embed
PRO II & PRO IV PRO II & PRO IV 2 Roll & 4 Roll Wire Feedersprofax-lenco.com/profax/images/Catalog/Sections/Wire-Accessories/... · PRO II & PRO IV 2 Roll & 4 Roll Wire Feeders The
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRO II & PRO IV2 Roll & 4 Roll Wire Feeders
The “PROFAX” PRO SERIES semiautomatic wire feeders are designed for use with numerous manufacturers welding power sources and are powered by 24 Volt AC for operator safety. The PRO SERIES is designed to give operator comfort with its ease of access to the wire drive, large wire speed knob and lighted power switch. A powerful 65 Watt motor is controlled by a PWM totally solid state circuit that gives a true constant wire speed by compensating for variations in line voltage and torque loads. The PRO SERIES will accommodate wire spools up to 44 lbs. and wire sizes of .023 through 1/16 in. with a wire speed range of 30 to 650 IPM. Both upper and lower drive rolls are geared together to give maximum wire drive, and a hinged cover protects the drive from contaminants. Although the PRO SERIES is designed to operate off of 24 volt AC, with the use of the optional internally mounted 115/24 VAC transformer, it can also be used with power sources having only 115 volt AC power.
A 24V AC POWERED CONSTANT SPEED WIRE FEEDER FOR GAS METAL- ARC WELDING WITH HARD & CORED WIRES
SPECIFICATIONS
PRO II 24 Volts AC Length - 20” Length - 22¼” 28 lbs. (12.7 Kg ) 30 lbs. (13.6 Kg )PRO IIx 7 Amps .023 - 1/16” 30 - 650 IPM Width - 10” Width - 10”PRO IV 50/60 Hz. Height - 11” Height - 11” 30 lbs. (13.6 Kg ) 32 lbs. (14.5 Kg )PRO IVx* Add 4 lbs. (1.8 Kg ) if optional 115 / 24V Transformer (P/N PX9045) is factory installed.
PROFAX NO. INPUT POWER WIRE CAPACITY WIRE SPEED PRO STD. DIM. X EURO DIM. NET WT.* SHIP WT.*
StandardConnection
DRIVE ROLL KITS - Euro-Quick Series PRO IIx
The PRO II & PRO IV will accept the standard ®“PROFAX” or TWECO style mig guns.
The PRO IIx & PRO IVx will accept theEuro-Quick style mig guns.
STANDARD FEATURES• Low voltage - operates off 24 VAC • PWM - totally solid state drive circuit • Pressure arms spring up and out of way• 65 Watt - permanent magnet motor • Both upper and lower feed rolls drive the wire • Calibrated wire tension adjustmentOPTIONS • Internally Mounted 115 VAC transformer • Control cords available for all types of power sources.
EuroConnection
DRIVE ROLL KITS - Standard Series PRO II PRO IV
PRO IVx
110
1 Standard - Flat Pressure Rolls (P/N 9052) are supplied with feeder.2 Optional - Flat, Knurled Pressure Rolls (P/N 9053) are recommended when using hard shelled cored wires.3 Add an “ X ” to the part number to indicate PRO IIx or PRO IVx.
ACCESSORIES
PRO II & PRO IV2 Roll & 4 Roll Wire Feeders
CONTROL PLUG8 socket plug only. Stock No. 9046 Connects to rear of wire feeder
UNIVERSAL cord7 conductor cord allows connection to any CV power source having 24 or 115VAC available.PX NO. 9225-10 10’ cord
115 / 24 Volt TransformerPROFAX NO. 9045Allows wire feeder to be operated from power sources having only 115VAC available. Mounts inside of wire feeder.
The “PROFAX” PRO SERIES semiautomatic wire feeders are designed for use with numerous manufacturers welding power sources and are powered by 24 Volt AC for operator safety. The PRO SERIES is designed to give operator comfort with its ease of access to the wire drive, large wire speed knob and lighted power switch. A powerful 65 Watt motor is controlled by a PWM totally solid state circuit that gives a true constant wire speed by compensating for variations in line voltage and torque loads. The PRO SERIES will accommodate wire spools up to 44 lbs. and wire sizes of .023 through 1/16 in. with a wire speed range of 30 to 650 IPM. Both upper and lower drive rolls are geared together to give maximum wire drive, and a hinged cover protects the drive from contaminants. Although the PRO SERIES is designed to operate off of 24 volt AC, with the use of the optional internally mounted 115/24 VAC transformer, it can also be used with power sources having only 115 volt AC power.
A 24V AC POWERED CONSTANT SPEED WIRE FEEDER FOR GAS METAL- ARC WELDING WITH HARD & CORED WIRES
SPECIFICATIONS
PRO II 24 Volts AC Length - 20” Length - 22¼” 28 lbs. (12.7 Kg ) 30 lbs. (13.6 Kg )PRO IIx 7 Amps .023 - 1/16” 30 - 650 IPM Width - 10” Width - 10”PRO IV 50/60 Hz. Height - 11” Height - 11” 30 lbs. (13.6 Kg ) 32 lbs. (14.5 Kg )PRO IVx* Add 4 lbs. (1.8 Kg ) if optional 115 / 24V Transformer (P/N PX9045) is factory installed.
PROFAX NO. INPUT POWER WIRE CAPACITY WIRE SPEED PRO STD. DIM. X EURO DIM. NET WT.* SHIP WT.*
StandardConnection
DRIVE ROLL KITS - Euro-Quick Series PRO IIx
The PRO II & PRO IV will accept the standard ®“PROFAX” or TWECO style mig guns.
The PRO IIx & PRO IVx will accept theEuro-Quick style mig guns.
STANDARD FEATURES• Low voltage - operates off 24 VAC • PWM - totally solid state drive circuit • Pressure arms spring up and out of way• 65 Watt - permanent magnet motor • Both upper and lower feed rolls drive the wire • Calibrated wire tension adjustmentOPTIONS • Internally Mounted 115 VAC transformer • Control cords available for all types of power sources.
EuroConnection
DRIVE ROLL KITS - Standard Series PRO II PRO IV
PRO IVx
110
1 Standard - Flat Pressure Rolls (P/N 9052) are supplied with feeder.2 Optional - Flat, Knurled Pressure Rolls (P/N 9053) are recommended when using hard shelled cored wires.3 Add an “ X ” to the part number to indicate PRO IIx or PRO IVx.
ACCESSORIES
PRO II & PRO IV2 Roll & 4 Roll Wire Feeders
CONTROL PLUG8 socket plug only. Stock No. 9046 Connects to rear of wire feeder
UNIVERSAL cord7 conductor cord allows connection to any CV power source having 24 or 115VAC available.PX NO. 9225-10 10’ cord
115 / 24 Volt TransformerPROFAX NO. 9045Allows wire feeder to be operated from power sources having only 115VAC available. Mounts inside of wire feeder.