Page 1 of 5 Princess Rawr v1 – Build Document Description: Description: Description: Description: The Princess Princess Princess Princess Rawr Rawr Rawr Rawr Overdrive verdrive verdrive verdrive is inspired by the Catalinbread KATZENKONIG. The circuit is based around a Tonebender merged with a Rat. This is a dynamic, interactive fuzz where small interactions with the controls can make a big difference. Nice organic sounds. “PrincessRawr” Fuzz/Distortion
5
Embed
Princess Rawr v1 WORD - Rullywow DIY Guitar Pedal PCB Store · Princess Rawr v1 – Build D ocument Description: Description: The PrincessPrincessPrincess RawrRawrRawr OOOOverdrive
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 5
Princess Rawr v1 – Build Document
Description:Description:Description:Description:
The PrincessPrincessPrincessPrincess RawrRawrRawrRawr OOOOverdrive verdrive verdrive verdrive is inspired by the Catalinbread KATZENKONIG. The circuit is
based around a Tonebender merged with a Rat. This is a dynamic, interactive fuzz where
small interactions with the controls can make a big difference. Nice organic sounds.
This is an This is an This is an This is an APPROXIMATEAPPROXIMATEAPPROXIMATEAPPROXIMATE drill guidedrill guidedrill guidedrill guide and is untestedand is untestedand is untestedand is untested. Enclosures. Enclosures. Enclosures. Enclosures differ in size so be sure to differ in size so be sure to differ in size so be sure to differ in size so be sure to
measure before your commit to drill!measure before your commit to drill!measure before your commit to drill!measure before your commit to drill!
Terms of Use:Terms of Use:Terms of Use:Terms of Use:
• PCBs from www.rullywow.com are intended for DIY use and are prohibited for
commercial resale. It is OK to build (and sell) a few pedals for your friends,
bandmates, yourself (that is what the DIY guitar pedal community is all about!).
Don’t be a tool and goop over the name on the PCB in an attempt to hide where it