laser cutter ANDERSON LAB FLOOR 6 333 S. Broad St. Philadelphia PA M–Th: 8–6 F: 8–5 Our laser cutter has a material processing platform of 32” x 18” x 9”. You are allowed to keep any scrap material. If you want to cut on it again, you will be charged for a new job. We may refuse the use of scrap material if there is an insufficient amount. In order to complete a job, your material must be at least 5” x 5”. STANDARD FEE: $10 There is a $10 minimum on all jobs, not including set up or material costs. This covers the first 20 minutes of cutting, engraving or imaging. Each additional minute is $1. We will not resize, adjust or manipulate your files. Files must be ready to go to the laser cutter when dropped off. If any changes are needed, we will not cut the material until you fix and provide us the corrected file. We are not responsible for replacing missing fonts, graphics or images if they are not present in the file when opened. PREPARING YOUR FILES Accepted file type: Adobe Illustrator (.ai) Color mode: RGB Document size: The same as your material Maximum: 18" x 32" All fonts should be converted to outlines. 1. Select your type 2. Menu Bar » Type » Create Outlines TO HAVE A SHAPE CUT OUT 1. Cut line should be a red outline, not a filled in shape. (R:255, G:0, B:0) 2. Set the stroke weight to 0.01. 12 x 16 16 x 18 18 x 32 1/8" masonite 1/4" masonite 1/8" acrylic 1/8" masonite 1/4" masonite 1/8" acrylic 1/8" masonite 1/4" masonite 1/8" acrylic $1.00 $1.25 $4.75 $1.50 $1.75 $9.50 $2.75 $3.50 $18.75 TO ENGRAVE LINE WORK 1. Lines to be engraved should be blue, not a filled in shape. (R:0, G:0, B:255) 2. Set the stroke weight to 0.01. TO ENGRAVE AN IMAGE Graphic work, filled in shapes or photographic image should be submitted in grayscale. Note: Anything that is gray will be engraved. White will not be touched. The darkest black will be the deepest engraving and the lighter grays will be more shallow. how to format your files: pricing & materials: Imaging Lab