Page 1
Total Amount(
Rs.)
1 2 3 4 5= (3 x 4 ) 3 + 5
In figures In words In figures In words
1
CONSTRUCTION
COST(A)434728095.9
2
ELECTRICAL
WORKS (B)50631482.88
3
INTERNAL
PLUMBING
WORKS( C)
22039179.51
4
EXTERNAL
DEVELOPMENT
WORKS(D)
77787937.22
585186695.5
PRICE SHEET/BOQ
Construction of Proposed ITBP Complex at 53rd Bn. PO –Palin ,Mandal -Kalikiri,
Distt- Chittoor, AP-517234PRICE SCHEDULE
SI. No. DESCRIPTION
ESTIMATED COST
(Rs.)
TO BE QUOTED BY TENDERER
% ( - ) Below / At ParAmount ( - ) Below / At
Par Estimated Cost
SIGNATURE OF BIDDER WITH
SEAL
TOTAL COST
TOTAL AMOUNT IN WORDS TO BE QUOTED BY CONTRACTOR
Page 2
SUM
DSR - ITEMS NON DSR - ITEMS
1.0 CONSTRUCTION COST (A) 3704,92,987.88 411,81,345.27
2.0 ELECTRICAL WORKS (B) 212,40,365.00 267,06,115.00
3.0 INTERNAL PLUMBING WORKS (C) 161,14,898.50 47,55,536.65
4.0 EXTERNAL DEVELOPMENT WORKS (D) 576,42,255.31 160,20,564.04
Total Cost (X) = A+B+C+D 4654,90,506.69 886,63,560.96
Grand Total
Grand Total (in Crores) 55.42
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri,
Chittoor (A.P)
SUMMARY OF COST
S.No DESCRIPTION TOTAL AMOUNT (Rs.)
5541,54,067.65
Page 1 of 1
Page 3
SUM
DSR - ITEMS NON DSR - ITEMS
1.0 EARTH WORK 7472790.95
2.0 CONCRETE WORK 10877374.65
3.0 REINFORCED CEMENT CONCRETE 190243239.97
4.0 MASONRY WORK 44227662.40
5.0 STONE WORKS 10450720.02
6.0 MARBLE & GRANITE WORK 3149204.35 908600.00
7.0 WOOD AND PVC WORK 28608934.55 13488730.25
8.0 STEEL WORKS 11609860.22
9.0 FLOORING WORKS 20274762.80 15176434.00
10.0 ROOFING WORKS 450696.20
11.0 FINISHING WORK 32885618.00 1156861.00
12.0 ROAD FANCING & ROAD WORK
13.0 ALUMINIUM WORK 8764738.95
14.0 WATER PROOFING WORK 11928104.85
I CONSTRUCTION COST (X) 370492987.88 41181345.27
II ELECTRICAL WORKS (Y)
III INTERNAL PLUMBING WORKS (Z)
Total Cost (A) = X+Y+Z 370492987.88 41181345.27
TOTAL (C+D+E)
Grand Total (in Crores) 41.17
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri,
Chittoor (A.P)
SUMMARY OF COST
S.No DESCRIPTION TOTAL AMOUNT (Rs.)
411674333.15
Page 1 of 1
Page 4
Estimate-
DSR - ITEMS NON DSR -
ITEMS
1.0 2.0 EARTH WORK
1.1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30cm in depth. 1.5 m in width
as well as 10 sqm on plan) including disposal of excavated earth, lead
upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly
dressed.
1.1.1 2.6.1 All kinds of soil Cum 32.00 155.60 4979.20
1.2 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30 cm in depth, 1.5 m in width
as well as 10 sqm on plan) including disposal of excavated earth, lead
upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly
dressed.
1.2.1 2.7.1 Ordinary Rock Cum 32.00 244.60 7827.20
1.2.2 2.7.3 Hard rock (blasting prohibited) Cum 42.00 618.10 25960.20
1.3 2.8 Excavation work by mechanical means (Hydraulic excavator)/ manual
means in foundation trenches or drains (not exceeding 1.5m in width or
10 sqm on plan), including upto 1.5 m, including getting out the
excavated soil and disposal ofdressing of sides and ramming of
bottoms, lift surplus excavated soils as directed, within a lead of 50 m.
1.3.1 2.8.1 All kinds of soil Cum 3575.80 157.50 563188.50
1.4 2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual
means in foundation trenches or drains (not exceeding 1.5m in width or
10 sqm on plan), including upto 1.5 m, including getting out the
excavated soil and disposal ofdressing of sides and ramming of
bottoms, lift surplus excavated soils as directed, within a lead of 50 m.
1.4.1 2.9.1 Ordinary Rock Cum 4515.00 263.50 1189702.50
1.4.2 2.9.3 Hard rock (blasting prohibited) Cum 4692.00 620.55 2911620.60
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
1/29
Page 5
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
1.5 2.25 Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
Cum 11297.00 112.40 1269782.80
1.6 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /
banking excavated or stacked materials
1.6.1 2.26.1 All kinds of soil Cum 750.00 46.25 34687.50
1.6.2 2.26.2 Ordinary or hard rock Cum 2030.00 82.95 168388.50
1.7 2.34 Supplying chemical emulsion in sealed containers including delivery as
specified
1.7.1 2.34.1 Chlorpyriphos / Lindane emulsifiable concentrate of 20% Litre 2313.00 185.95 430102.35
1.8 2.35 Diluting and injecting chemical emulsion for POST-
CONSTRUCTIONAL anti-termite treatment (excluding the cost of
chemical emulsion):
1.8.1 2.35.1 Along external wall where the apron is not provided using chemical
emulsion @ 7.5 litres / sqm of the vertical surface of the substructure
to a depth of 300 mm including excavation channel along the wall &
rodding etc. complete:
1.8.1.1 2.35.1.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. Metre 2670.00 15.40 41118.00
1.9 16.3 Supplying and stacking at site
1.9.1 16.3.8 Red bajri Cum 256.00 1459.40 373606.40
1.9.2 16.3.9 Good Earth Cum 1408.00 320.90 451827.20
TOTAL OF EARTH WORKS 7472790.95
2/29
Page 6
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
2.0 4.0 CONCRETE WORK
2.1 4.1 Providing and laying in position cement concrete of specified grade
excluding the cost of centring and shuttering -
All work upto plinth level:
2.1.1 4.1.3 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)Cum 284.00 5466.30 1552429.20
2.1.2 4.1.8 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm
nominal size)Cum 1973.00 4301.15 8486168.95
2.2 4.11 Providing and laying damp-proof course 50mm thick with cement
concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).
Sqm 258.00 314.85 81231.30
2.3 4.12 Extra for providing and mixing water proofing material in cement
concrete work in doses by weight of cement as per manufacturer's
specifications
Per 50
Kg
Cement
126.00 48.15 6066.90
2.4 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of
approved quality using 1.7kg per square metre on damp proof course
after cleaning the surface with brushes and finally with a piece of cloth
lightly soaked in kerosene oil.
Sqm 258.00 132.00 34056.00
2.5 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1
cement :3 coarse sand : 6graded stone aggregate 20mm nominal size)
over 75mm bed by dry brick ballast 40mm nominal size well rammed
and consolidated and grouted with fine sand including finishing the top
smooth
Sqm 1711.00 419.30 717422.30
TOTAL OF CONCRETE WORKS 10877374.65
3/29
Page 7
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
3.0 5.0 REINFORCED CEMENT CONCRETE
Form Work
3.1 5.9 Centring and shuttering including strutting, propping etc. and removal
of form for :
3.1.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 5903.00 196.45 1159644.35
5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth
and string courses etc.Sqm 2572.80 360.80 928266.24
3.1.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform.Sqm 25263.58 401.65 10147116.91
3.1.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.Sqm 26501.62 332.15 8802513.08
3.1.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 17512.16 453.35 7939137.74
REINFORCED CEMENT CONCRETE
3.2 5.22 Steel Reinforcement for R.C.C. work, including straightening, cutting,
bending, placing in position and binding all complete up to plinth and
above plinth level.
3.2.1 5.22.6 Thermo-mechanically treated bars KG 1319925.00 68.10 89886892.50
3.3 5.33 Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement
concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost of
centering, shuttering, finishing and reinforcement, including admixtures
in recommended proportions as per IS: 9103 to accelerate, retard
setting of concrete, improve workability without impairing strength and
durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum.
Excess/ less cement used as per design mix is
payable/recoverable separately).
3.3.1 5.33.1 All works up to plinth level. Cum 3252.00 6296.15 20475079.80
3.3.2 5.33.2 All works up to floor V level. Cum 7257.00 7014.55 50904589.35
TOTAL OF REINFORCED CEMENT CONCRETE WORKS 190243239.974/29
Page 8
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
MASONRY WORK
4.1 6.34 Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in super structure
above plinth level up to floor V level in :
4.1.1 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand). Cum 5308.00 6006.20 31880909.60
4.2 6.4 Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in super structure
above plinth level up to floor V level in :
4.2.1 6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 213.00 6006.20 1279320.60
4.3 6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in foundations and plinth in
4.3.1 6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand) Sqm 836.00 751.10 627919.60
4.4 6.45 Half brick masonry with non modular fly ash bricks of class designation
10, conforming to IS : 12894, in super structure above plinth and upto
floor V level.
4.4.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 12651.00 751.10 9502166.10
4.5 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at
every third course of half brick masonry. Sqm 13487.00 69.50 937346.50
TOTAL OF MASONRY WORKS 44227662.40
STONE WORKS
5.1 MR Random rubble masonry with hard stone in foundation and plinth
including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse
sand : 12 graded stone aggregate 20 mm nominal size) upto plinth
level with Cement mortar 1:6 (1 cement : 6 coarse sand)inclusive of
labour cutting and dressing of stone. (The Stone boulders shall be
issued free of cost at site)
Cum 2178.60 2930.89 6385228
5/29
Page 9
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
5.2 MR Random rubble masonry with hard stone in superstructure above
plinth level and upto floor five level including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone
aggregate 20 mm nominal size) above plinth level with Cement mortar
1:6 (1 cement : 6 coarse sand)inclusive of labour cutting and dressing
of stone(The Stone boulders shall be issued free of cost at site). (The
Stone boulders shall be issued free of cost at site)
Cum 1157.00 3513.82 4065492
Total of Stone Works 10450720.02
MARBLE AND GRANITE WORKS
6.1 MR Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills , facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels.
6.1.1 MADANAPALLI Granite Stone of any colour and shade
6.1.1.1 Area of slab over 0.50 sqm Sqm 413.00 2200.00 908600
6.2 8.3 Providing edge moulding to 18 mm thick marble stone counters,
Vanities etc., including machine polishing to edge to give high gloss
finish etc. complete as per design approved by Engineer-in-Charge.
6.2.1 8.3.2 Granite work Metre 494.00 230.55 113891.70
6.3 8.4 Extra for fixing marble / granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
based adhesive, including cleaning etc. complete Metre 494.00 247.40 122215.60
6/29
Page 10
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
6.4 8.5 Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in
marble/ Granite/stone work, including necessary holes for pillar taps
etc. including moulding, rubbing and polishing of cut edges etc.
complete
Each 153.00 386.60 59149.80
6.5 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of
cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3
kg/sqm including pointing in white cement complete.
6.5.1 8.9.1.2 Granite of any colour and shade Sqm 1485.00 1921.85 2853947.25
TOTAL OF MARBLE AND GRANITE WORKS 3149204.35 908600.00
WOOD AND PVC WORK
7.1 MR Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately). African Medium 2nd class
Teak wood
Cum 105.75 79727.00 8431130
7.2 9.9 Providing and fixing glazed shutters for doors, windows and clerestory
windows using 4 mm thick float glass panes, including ISI marked M.S.
pressed butt hinges bright finished of required size with necessary
screws
7.2.1 9.9.1 Second class teak wood
7.2.1.1 9.9.1.2 30 mm thick shutters Sqm 1881.00 2939.75 5529669.75
7.3 9.20 Providing and fixing ISI marked flush door shutters conforming to IS:
2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters
7.3.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws.Sqm 2803.00 2606.45 7305879.35
7/29
Page 11
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
7.3.2 9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws. Sqm 641.00 2374.15 1521830.15
7.4 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of
door shutter to be measured).
Sqm 3444.00 365.85 1259987.40
7.5 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel
plated brackets.
7.5.1 9.47.2 25 mm dia (heavy type) metre 2015.00 138.20 278473.00
7.6 9.48 Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat
with approved steel primer all complete.
7.6.1 9.48.1 Fixed to steel windows by welding KG 28677.00 109.00 3125793.00
7.7 9.69 Providing and fixing oxidised M.S. Safety chain with necessary fixtures
for doors, (weighting not less than 450 gms) Each 156.00 78.00 12168.00
7.8 9.76 Providing and fixing bright finished brass 100 mm mortice latch and
lock with 6 levers and a pair of lever handles of approved quality with
necessary screws etc. complete.
Each 1404.00 546.40 767145.60
7.9 9.77 Providing and fixing bright finished brass 100 mm mortice latch with
one dead bolt and a pair of lever handles of approved quality with
necessary screws etc. complete
Each 429.00 476.70 204504.30
7.10 9.83 Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm),
with necessary accessories and screws etc. complete.
Each 2.00 753.75 1507.50
8/29
Page 12
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
7.11 9.84 Providing and fixing aluminium extruded section body tubular type
universal hydraulic door closer (having brand logo with ISI, IS : 3564,
embossed on the body, door weight upto 36 kg to 80 kg and door width
from 701 mm to 1000 mm), with double speed adjustment with
necessary accessories and screws etc. complete.
Each 4.00 1043.60 4174.40
7.12 9.90 Providing and fixing special quality chromium plated brass cupboard
locks with six levers of approved quality including necessary screws
etc.
complete.
7.12.1 9.90.1 Size 40 mm Each 252.00 174.70 44024.40
7.13 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868 )
transparent or dyed to required colour or shade, with necessary screws
etc. complete
7.13.1 9.97.1 300 x10 mm Each 4544.00 112.10 509382.40
7.13.2 9.97.4 150 x 10 mm Each 5560.00 65.35 363346.00
7.13.3 9.97.5 100 x 10 mm Each 272.00 52.35 14239.20
7.14 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or
dyed to required colour or shade, with necessary screws etc. complete
:
7.14.1 9.100.2 100 mm Each 5560.00 55.10 306356.00
7.15 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade, with necessary
screws etc. complete.
7.15.1 9.101.1 Single rubber stopper Each 2440.00 37.50 91500.00
7.16 9.114 Providing and fixing magnetic catcher of approved quality in cupboard /
ward robe shutters, including fixing with necessary screws etc.
complete.
7.16.1 9.114.1 Triple strip vertical type Each 432.00 28.60 12355.209/29
Page 13
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
7.17 9.127 Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt / suede finish with high density protective
surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.
7.17.1 9.127.2 1.0 mm thick Sqm 1200.00 676.40 811680.00
7.18 9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-
laminated flat pressed three layer particle board or graded wood
particle board IS: 12823 marked, exterior grade (Grade l Type ll),
having one side decorative lamination and other side balancing
lamination, including IInd class teak wood lipping of 25 mm wide x12
mm thick with necessary screws and bright finished stainless steel
piano hinges, complete as per direction of the Engineer-in-Charge.
Sqm 4.00 1629.75 6519.00
7.19 9.130 Providing and fixing cup board shutters with 25 mm thick veneered
particle board IS : 3097 marked, exterior grade (Grade I), of approved
make, including IInd class teak wood lipping of 25 mm wide x 12 mm
thick with necessary screws and bright finished stainless steel piano
hinges, complete as per direction of Engineer-in-Charge.
7.19.1 9.130.1 With decorative veneering on one side and commercial veneering on
other side.Sqm 306.00 1409.05 431169.30
10/29
Page 14
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
7.20 9.133 Providing and fixing, in position concealed G.I. section for wall paneling
using board of required thickness fixed on the „W‟ profile (0.55 mm
thick) having a knurled web of 51.55 mm and two flanges of 26 mm
each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter
channel having one flange of 20 mm and another flange of 30 mm with
thickness of 0.55 mm and web of length 27 mm. Perimeter channel is
fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C
with fully threaded selftapping dry wall screws. Board is fixed to the „W‟
profile with 25 mm countersunk ribbed head screws @ 200 mm C/C.,
all complete as per the drawing & directions of engineer-in-charge, the
joints of the boards are finished with specially formulated jointing
compound and 48 mm wide jointing tape to provide seamless finish.
7.20.1 9.133.1 Tapered edge calcium silicate board made with calcareous & siliceous
materials reinforced with cellulose fiber manufactured through
autoclaving process to give stable crystalline structure with
compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm.
7.20.1.1 9.133.1.1 10mm thick Sqm 177.00 1002.15 177380.55
7.21 9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to
windows and clerestory windows using wire gauge with average width
of
aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete.
7.21.1 9.135.1 With 2nd class teak wood beading 62X19 mm Sqm 3280.00 1600.95 5251116.00
7.21.2 9.135.2 With 12 mm aluminum U beading Sqm 224.00 1317.55 295131.20
7.22 9.130 Providing and fixing cup board shutters with 25 mm thick veneered
particle board IS : 3097 marked, exterior grade (Grade I), of approved
make, including IInd class teak wood lipping of 25 mm wide x 12 mm
thick with necessary screws and bright finished stainless steel piano
hinges, complete as per direction of Engineer-in-Charge.
7.22.1 9.130.1 With decorative veneering on one side and commercial veneering on
other side.Sqm 199.00 1409.05 280400.95
9.135.1 With 2nd class teak wood beading 62X19 mm Sqm 2.00 1600.95 3201.90
11/29
Page 15
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
7.23 MR Providing and fixing Stainless steel modular kitchen with chimney as
per achitectural drawings and as instructed by Engineer-in-charge. Sqm 632.20 8000.00 5057600
TOTAL OF WOOD AND PVC WORKS 28608934.55 13488730.25
STEEL WORKS
8.1 10.2 Structural steel work riveted, bolted or welded in built up sections,
trusses and framed work, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer all complete.1569.00 73.95 116027.55
8.2 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6
mm angle iron and 3 mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a priming
coat of approved steel primer.
8.2.1 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. Sqm 1307.10 2906.65 3799282.22
10.14 Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured from commercial mild steel sheet of 1.60 mm thickness,
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,
pressed mild steel welded or rigidly fixed together by mechanical
means, including M.S. pressed butt hinges 2.5 mm thick with mortar
guards, lock strikeplate and shock absorbers as specified and applying
a coat of approved steel primer after pre-treatment of the surface as
directed by Engineerin-charge:
10.14.3 Profile E
10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb Metre 33.00 424.20 13998.60
8.3 10.25 Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved
steel primer using structural steel etc. as required.
8.3.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works Sqm 2092.00 90.10 188489.20
12/29
Page 16
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
8.4 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing,
polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing
the railing with necessary accessories & stainless steel dash fasteners
, stainless steel bolts etc., of required size, on the top of the floor or the
side of waist slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of stainless steel
members shall be considered excluding fixing accessories such as
nuts, bolts, fastenersetc.).
KG 12283.00 619.40 7608090.20
TOTAL OF STEEL WORKS 11609860.22
FLOORING WORKS
9.1 MR Providing and laying polished Granite stone (MADANAPALLI) flooring,
skirting, risers, treads etc. in required design and patterns, in linear as
well as curvilinear portions etc. complete as per the architectural
drawings with 18mm thick stone slab over 20 mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with
pigment of matching shade including rubbing, curing and polishing etc.
all complete as specified and as directed by the Engineer- in-Charge.
sqm 11102.00 1367.00 15176434.00
9.2 11.4 52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12
mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate 6 mm nominal size) by volume,
hardening compound mixed @ 2 litre per 50 kg of cement or as per
manufacturer‟s specifications. This includes cost of cement slurry, but
excluding the cost of nosing of steps etc. complete.
Sqm 225.00 535.25 120431.25
13/29
Page 17
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
9.3 11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match
the shade of tiles, including rubbing and cleaning etc. complete, on 20
mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
9.3.1 11.20.4 Ordinary cement without any pigment Sqm 225.00 658.15 148083.75
9.4 11.24 Extra for pre finished nosing to treads of steps of marble stone. sqm 404.00 274.90 111059.60
9.5 11.25 Extra for marble / granite stone flooring in treads of steps and risers
using single length up to 2.00 metre. sqm 593.00 320.30 189937.90
9.6 Analyse
d on
DSR-
2014
Providing and laying polished Granite stone (MADANAPALLI) flooring,
skirting, risers, treads etc. in required design and patterns, in linear as
well as curvilinear portions etc. complete as per the architectural
drawings with 18mm thick stone slab over 20 mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with
pigment of matching shade including rubbing, curing and polishing etc.
all complete as specified and as directed by the Engineer- in-Charge.
9.6.1 11.26.1 sqm 512.00 1367.00 699904.00
.
9.7 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS : 15622 (thickness to be specified by the manufacture ) of approved
make in all colours, shades except burgundy, bottle green, black of any
size as approved by The Architect in skirting, risers of steps and dados
over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand)
and jointing with grey cement slurry @ 3.3kg per sqm including
pointing in white cement mixed with pigment of matching shade
complete.
Sqm 6086.00 836.65 5091851.90
14/29
Page 18
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
9.8 11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in all colours, shades,
except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed
of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing
the joints with white cement and matching pigments etc., complete
sqm 1213.00 904.45 1097097.85
9.9 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size
300x300 mm or more (thickness to be specified by the manufacturer),
of 1st quality conforming to IS : 15622, of approved make, in all
colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigments etc.,
complete.
sqm 2403.00 1009.60 2426068.80
9.1 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to
be specified by the manufacturer) with water absorption less than
0.08% and conforming to IS : 15622, of approved make, in all colours
and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand), including grouting the joints with white cement and
matching pigments etc., complete.
9.10.1 11.41.2 Size of Tile 600x600mm. Sqm 6467.00 1405.95 9092278.65
9.11 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade, in
skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand), including grouting the joint with white cement
& matching pigments etc. complete.
9.11.1 11.46.2 Size of Tile 600x600mm. Sqm 730.00 1415.40 1033242.00
15/29
Page 19
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
9.1 16.68 Providing and laying 60mm thick factory made cement concrete
interlocking paver block of M -30 grade made by block making
machine with strong vibratory compaction and of approved size and
design/ shape laid in required colour and pattern over and including
50mm thick compacted bed of course sand, filling the joints with
coarse sand etc. all complete as per the direction of Engineer-
incharge.
Sqm 254.00 536.65 136309.10
9.13 Analyse
d on
DSR-
2014
Providing and laying polished Granite stone (MADANAPALLI) flooring,
skirting, risers, treads etc. in required design and patterns, in linear as
well as curvilinear portions etc. complete as per the architectural
drawings with 18mm thick stone slab over 20 mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with
pigment of matching shade including rubbing, curing and polishing etc.
all complete as specified and as directed by the Engineer- in-Charge.
sqm 94.00 1367.00 128498.00
TOTAL OF FLOORING WORKS 20274762.80 15176434.00
ROOFING WORKS
10.1 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 stone aggregate 10mm and down gauge) including
finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design :
10.1.1 12.21.1 In 75x75mm deep chase Metre 2933.00 143.10 419712.30
10.2 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400
micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement, rounding the edges and making and
finishing the outlet complete.
Each 166.00 186.65 30983.90
16/29
Page 20
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
10.3 12.45 Providing and fixing at all height false ceiling including providing and
fixing of frame work made of special sections power pressed from M.S.
sheet and galvanised in accordance with zinc coating of grade 350 as
per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm
thick with flanges of 22mm and 37mm at 1200mm centre to centre one
flange fixed to the ceiling with dash fastener 12.5mm diax40mm long
with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required
length, and other end of angle hanger being fixed with nut and bolts to
G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to
centre to which the ceiling section 0.5mm thick button wedge of 80mm
with tapered flanges of 26mm each having clips of 10.5mm at 450mm
centre to centre shall be fixed in a direction perpendicular to G.I.
channel with connecting clips made out of 2.64mm diax230mm long
G.I. wire at every junction including fixing the gypsum board with
ceiling section and perimeter channels 0.5mm thick 27mm high having
flanges of 20mm and 30mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450mm centre to centre with
25mm long drive-all screws @ 230mm interval including jointing and
fixing to a flush finish of tapered and square edges of the board with
recommended filler, jointing tapes, finisher and two coats of primer
suitable for board as per manufactures specification and also including
the cost of making openings for light fittings, grills, diffusers, cutouts
made with frame of perimeter channels suitably fixed all complete as
per drawing and specification and direction of the Engineer in Charge
but excluding the cost of painting with :
10.3.1 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS:
2095- Part Isqm 315.00 907.10 285736.50
17/29
Page 21
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
10.4 12.50 Providing and fixing precoated galvanised iron profile sheets (size,
shape and pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single
length upto 12 metre or as desired by Engineerin-charge. The sheet
shall be fixed using self drilling / self tapping screws of size (5.5x 55
mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or
curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.
sqm 64.00 622.00 39808.00
10.5 12.51 Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/ self tapping screws complete
10.5.1 12.51.1 Flashings/ Aprons.( Upto 600 mm ) Metre 40.00 633.90 25356.00
10.5.2 12.51.6 Gutter (600 mm over all girth) Metre 16.00 622.00 9952.00
18/29
Page 22
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
10.6 12.52 Providing and fixing tiled false ceiling of approved materials of size
595x595 mm in true horizontal level, suspended on inter locking metal
grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/
sqm, both side inclusive) consisting of main “T” runner with suitably
spaced joints to get required length and of size 24x38 mm made from
0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center
and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum)
sheet, 1200 mm long spaced between main “T” at 600 mm center to
center to form a grid of 1200x600 mm and secondary cross “T” of
length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum)
sheet to be interlocked at middle of the 1200x600 mm panel to form
grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying
false ceiling tiles of approved texture in the grid including, required
cutting/making, opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main “T” runners to be suspended from
ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to
ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI
adjustable rods with galvanised butterfly level clips of size 85 x 30 x
0.8 mm spaced at 1200 mm center to center along main T, bottom
exposed width of 24 mm of all T-sections shall be pre-painted with
polyester
paint, all complete for all heights as per specifications, drawings and as
directed by Engineer-in-charge.
10.6.1 12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from
plasterboard having glass fibre conforming to IS: 2095 part I, of size
595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with
center borders of 48 mm and the side borders of 30 mm, backed with
non woven tissue on the back side, having an NRC ( Noise Reduction
Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
Sqm 63.00 1155.20 72777.60
10.7 12.57 Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick,
wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel
plug & washers and held in position by criss crossing GI wire etc.
complete as per directions of Engineer-in-Charge.
Sqm 177.00 319.90 56622.30
19/29
Page 23
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
450696.20
FINISHING WORK
11.1 13.4 12 mm cement plaster of mix :
11.1.1 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 46701.00 158.40 7397438.40
11.2 13.4 12 mm cement plaster of mix : (Ceiling)
11.2.1 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 18625.00 158.40 2950200.00
11.3 13.5 15 mm cement plaster on rough side of single or half brick wall of mix :
11.3.1 13.5.2 1:6 (1 cement: 6 coarse sand) Sqm 35683.00 183.45 6546046.35
13.12 18 mm cement plaster in two coats under layer 12 mm thick cement
plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick
cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with
sponge.
Sqm 140.00 228.90 32046
11.4 13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine
sand):
11.4.1 13.33.2 Raised and cut pointing Sqm 3316.00 276.70 917537.20
11.5 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade
11.5.1 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm Sqm 33992.30 90.00 3059307.00
11.6 13.41 Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade
11.6.1 13.41.1 New work (two or more coats) over and including water tinna- ble
priming coat with cement primer sqm 694.00 89.70 62251.80
11.7 13.60 Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade
11.7.1 13.60.1 Two or more coats on new work sqm 64632.00 80.50 5202876.00
TOTAL OF ROOFING WORKS
20/29
Page 24
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
11.8 13.61 Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade
11.8.1 13.61.1 Two or more coats on new work sqm 10919.00 74.40 812373.60
11.9 13.69 Polishing on wood work with ready mixed wax polish of approved
brand and manufacture :
11.9.1 13.69.1 New work sqm 751.00 85.15 63947.65
11.10 13.80 Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete.Sqm 65160.00 89.65 5841594.00
11.11 MR Providing and laying cornices and moulding with P.O.P as per drawing.Mtr 8831.00 131.00 1156861.00
TOTAL OF FINISHING WORKS 32885618.00 1156861.00
ROAD WORK (Fencing)
12.1 16.53 Providing and fixing concertina coil fencing with required dia 610 mm
(having 15 Nos. round per 6 metre length) upto 3m height of wall with
existing angle iron "Y" shaped placed 2.4 m or 3.00 m apartand with 9
horizontal R.B.T stud tied with G.I. staples and G.I. clips to retain
horizontal including necessary bolts or G.I. barbed wire tied to angle
iron all complete as per direction of Engineer-in-charge with reinforced
barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile
strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight
43.478gm/metre (cost of M.S. angle, C.C. block shall be paid
separately)
12.1.1 Metre 20670.00 287.05 5933323.50
12.2 16.19 Supplying at site Angle iron post & strut of required size including
bottom to be split and bent at right angle in opposite direction for 10
cm length and drilling holes upto 10 mm dia. etc. complete. KG 5501.00 70.90 390020.90
ROAD AND PATH WORKS
21/29
Page 25
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
13.1 16.1 Preparation and consolidation of sub grade with power road roller of 8
to 12 tonne capacity after excavating earth to an average of 22.5 cm.
depth, dressing to camber and consolidating with road roller including
making good the undulations etc. and re-rolling the sub grade and
disposal of surplus earth lead upto 50 metres.
Sqm 17127.00 81.29 1392253.83
13.1.1 2.6 Earthwork excavation in over areas in all kinds of soils cum 600.00 155.60 93360.00
13.2 16.3 Supplying and stacking at site.
13.2.1 16.3.2 63 mm to 45 mm size stone aggregate. (Free issue of material) Cum 1028.00 134.40 138163.20
13.3 16.3.7 Stone screening 11.2 mm nominal size (Type B) Cum 1028.00 1471.00 1512188.00
13.3.1 16.3.10 Moorum. Cum 3230.00 646.35 2087710.50
13.4 16.4 Laying, spreading and compacting stone aggregate of specified sizes
to WBM specifications including spreading in uniform thickness, hand
picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in
stages to proper grade and camber, applying and brooming requisite
type of screening / binding material to fillup interstices of coarse
aggregate watering and compacting to the required density.
Cum 3393.00 425.05 1442194.65
13.5 16.30 Providing and applying tack coat using hot straight run bitumen of
grade VG - 10, including heating the bitumen, spraying the bitumen
with mechanically operated spray unit fitted on bitumen boiler,
cleaning and preparing the existing road surface as per specifications :
13.5.1 16.30.2 On bituminous surface @ 0.50 Kg / sqm Sqm 16966.00 53.75 911922.50
22/29
Page 26
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
13.6 16.36 Providing and laying Bitumen Penetration Macadam with hard stone
aggregate of quality, size and grading as specified, with bitumen of
suitable penetration grade, including required key aggregate as
specified, spreading coarse aggregate with the help of self propelled/
tipper tail mounted aggregate spreader and applying bitumen by a
pressure distributor and then spreading key aggregate with the help of
aggregate spreader complete, including consolidation with road roller
of minimum 8 to 10 tonne capacity to achieve specified values of
compaction and surface accuracy
13.6.1 16.36.1 For 50mm compacted thickness using coarse aggregate of size 50-20
mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm
graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @
50 kg/ 10 sqm.
Sqm 16966.00 455.85 7733951.10
13.7 16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved quality,
using stone chippings (60% with 12.5 mm nominal size and 40% with
10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand @
1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum
of stone chippings and @ 128 kg/cum of sand over a tack coat with
hot straight run bitumen, including consolidation with road roller of 8 to
10 tonne etc. complete. (tack coat to be paid separately) :
13.7.1 16.38.1 With paving Asphalt grade VG - 10 Sqm 8483.00 289.60 2456676.80
13.8 13.61 Painting FOR KERB/RRM WALL with synthtic enamel paint
13.8.1 New work (Two or more coats Sqm 4631.00 74.40 344546.40
16.63 Random rubble masonry with hard stone in foundation
and plinth including levelling up with cement
concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded
stone aggregate 20 mm nominal size) upto plinth CUM854.29
2930.92503838.56
16.68level with Cement mortar 1:6 (1 cement : 6 coarse sand)inclusive of labour
cutting and
13.9
23/29
Page 27
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
13.10 16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1
lime: 2fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size),including sand) in foot paths, including preparation of sub
grade with a hand rammer,finishing with 10mm thick cement mortar
1:3 (1 cement : 3 coarselaying 10 mm thick leveling course of fine sand
(jamuna SAND)
Cum 120.00 6537.00 784440.00
13.11 16.93 Providing and placing in position 100mm thick factory made machine
batched & machine mixed Precast RCC Rectangular Covers on drains
of footpath of various sizes,of M-25 grade cement concrete for RCC
work, including cost of centering, shuttering, reinforcement of 8mm
dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways ,
neat cement punning on finished surface, properly encased on all
edges with 1.6 mm thick , 100mm wide MS sheet duly painted over
priming coat , reinforcement to be welded at edges with MS sheet
and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage
,all leads & lift, handling at site etc. all complete as per direction of
Engineer-in-Charge
Sqm 1323.00 2090.30 2765466.90
TOTAL OF ROAD WORKS 30490056.84
14 ALUMINIUM WORK
24/29
Page 28
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
14.1 21.1 Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z section and other section of approved make conforming
to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing
clips, or with expansion hold fasteners including necessary filling up of
gaps at junctions at top, bottom and sides with required PVC/neoprene
felt etc. Aluminium section shall be smooth, rust free, straight, mitred
and jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing /panelling , C.P. brass/stainless
steel screws, all complete as per architectural drawings and the
direction of Engineer-in-charge. (Glazing and panelling to be paid for
separately).
14.1.1 21.1.1 For fixed portion
14.1.1.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 3738.00 348.50 1302693.00
14.2 21.1.2 For shutters of doors, windows & ventilators including providing and fixing
hinges/ pivots and making provision for fixing of fitting wherever required
including the cost of PVC/neoprene gasket required (Fittings shall be paid
for separately)
14.2.1 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 8724.00 405.90 3541071.60
14.3 21.3 Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with PVC / neoprene gasket etc. complete
as per the architectural drawings of engineer-in-charge. (Cost of
aluminium snap beading shall be paid in basic item)
14.3.1 21.3.2 With float glass panes of 5.5 mm thickness Sqm 622.00 1054.20 655712.40
14.4 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/
Stone work by providing weather silicon sealant over backer rod of
approved quality as per architectural drawings and direction of
Engineer-in-charge complete.
25/29
Page 29
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
14.4.1 21.8.1 Upto 5mm depth and 5 mm width metre 1750.00 88.75 155312.50
14.5 21.13 Providing and fixing 100mm brass locks (best make of approved
quality) for aluminium doors including necessary cutting and making
good etc.
complete.
Each 1.00 418.65 418.65
14.6 21.16 Providing and fixing aluminium round shape handle of outer dia 100
mm with SS screws etc. complete as per direction of Engineerin-
charge.
14.6.1 21.16.1 Anodized (AC 15 ) aluminium Each 12.00 65.60 787.20
14.7 21.17 Providing and fixing anodised aluminium grill (anodised transparent or
dyed to required shade according to IS: 1868 with minimum anodic
coating of grade AC 15) of approved design/pattern, with approved
standard section and fixed to the existing window frame with C.P.
brass/ stainless steel screws @ 200 mm centre to centre, including
cutting the grill to proper opening size for fixing and operation of
handles and fixing approved anodised aluminium standard section
around the opening, all complete as per requirement and direction of
Engineer-in-charge. (Only weight of grill to be measured for payment).
KG 7585.00 403.35 3059409.75
14.8 9.97 P/F aluminium tower bolts ISI Marked anodised (anodic coating not
less then grade AC 10 as per IS :1868) transparent or dyed to required
colour or shade with necessary screw etc. complete.
14.8.1 9.97.3 200 x 10 mm Each 10.00 79.25 792.50
14.8.2 9.97.4 150 x 10 mm Each 403.00 65.35 26336.05
14.9 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or
dyed to required colour or shade, with necessary screws etc. complete
:
14.9.1 9.100.2 100 mm Each 403.00 55.10 22205.30
TOTAL OF ALUMINIUM WORK 8764738.95
26/29
Page 30
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
WATER PROOFING WORK
15.1 22.3 Providing and laying water proofing treatment to vertical and horizontal
surfaces of depressed portions of W.C., kitchen and the like consisting
of :
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water
proofing compound conforming to IS 2645 in recommended
proportions including rounding off junction of vertical and horizontal
surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)
mixed with water proofing compound in recommended proportion
including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7
kg. per sqm of area
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC
sheet should be 100 mm wide and pasted to each other with bitumen
@ 1.7 kg/sqm).
Sqm 5063.00 522.90 2647442.70
27/29
Page 31
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
15.2 22.7 Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations: a) Applying a
slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with
water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto
300mm height including cleaning the surface before treatment. b)
Laying brick bats with mortar using broken bricks/brick bats 25 mm to
115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge over 20 mm thick layer of cement
mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-
in-charge to required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of walls and slabs
c) After two days of proper curing applying a second coat of cement
slurry using 2.75kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-
charge. d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-
in-charge including laying glass fibre cloth of approved quality in top
layer of plaster and finally finishing the surface with trowel with neat
cement slurry and making pattern of 300x300 mm square 3mm deep.
e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Engineer-in-Charge :
28/29
Page 32
Estimate-
DSR - ITEMS NON DSR -
ITEMS
QUANTITY
Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
S.No.DSR -
CodeDESCRIPTION OF ITEMS UNIT
RATE
(Rs.)
AMOUNT (Rs.)
15.3 22.7.1 With average thickness of 120mm and minimum thickness at khurra as
65 mm.Sqm 9103.00 1019.05 9276412.15
14.4 MR Providing and filling cinder blocks including proper watering and
compaction in sunken areas all complete as per drawings and as
directed by the Engineer-in-charge
Cum 5.00 850.00 4250.00
TOTAL OF WATER PROOFING WORKS 11928104.85
29/29
Page 33
DSR
Item
no.
Description Unit Rate (in Rs.) Total Qty Total Amount Total Amount
DSR N.DSR
(NS) Supplying & fixing 75mm x 75mm x 10 mm zinc
passivated box with mould cord outlet complete
with RJ 45 sockets as required for computer data
point.
450.00 64.00 28,800.00
(NS) Supplying & laying CAT 6 for LAN wiring in PVC
conduit / Cable Tray complete as required.
0
70.00 1700 1,19,000.00
(NS) Supplying and fixing of the following sheet steel
clad wall / recess mounting telephone tag blocks
of krone make constructed from 14 SWG sheet
steel finished with red oxide coating of two coats
of paint with hinged gasketted powder coated
door and complete.
0
a) 05 pairs Each 1000.00 8 8,000.00
0
b) 10 pairs Each 1500.00 8 12,000.00
0
c) 20 pairs Each 2500.00 8 20,000.00
d) 50 pairs Each 5000.00 3 15,000.00
0
(NS) Supplying of following type recessed / surface
mounted fluorescent light fixture complete with
electronic choke earthing point and with TL-5 /
CFL lamps complete as required. (HAVELLS /
BAJAJ / WIPRO)
0
0
a) 22W LED (4') Each 3100.00 415 12,86,500.00
b) 15W LED Downlighter
Each 3100.00 125 387500
c) 15W CFL Downlighter
Each 3100.00 200 620000d) 12 W LED (2')
Each 2150.00 5 10750
e) 18W LED (2')
Each 2150.00 25 53750f) 18W LED Batton (4')
Each 650.00 20 13000
0
g) 10W LED bulkhead Each 1900.00 102 193800
(NS) Supplying of 305 mm 1400 RPM exhaust fan
complete with louver and bird guard screen with 3
core flexible wire as required. 0
Each 2800.00 302 845600
Supplying of ceiling fan, complete with blades
with suitable length of down rods shackle
insulator earthing point including connection etc .
as required. 0
0
a) 1200 mm sweep Each 1600.00 773 1236800
(NS) AC 0
Each 39000.00 13 507000
(NS) Desert Cooler 0
Each 14000.00 90 1260000
(NS) Supplying, installation, testing and commissioning
of inteligent analouge photoelectric optical type
smoke detector and mounting base with LED light
complete as required.
0
3350.00 440 1474000
(NS) Supplying, installation, testing and commissioning
of inteligent analouge photoelectric optical type
heat detector and mounting base with LED light
complete as required.
0
3350.00 32 107200
(NS) Supplying, installation, testing and commissioning
of duel tone electronic hooter suitable for wall
mounted complete as required.
0
6310.00 37 233470
(NS) Supplying, installation, testing and commissioning
of manual call box in suitable enclosure with
arrangement to raise the alarm when the glass is
manually broken complete as required.
0
5720.00 38 217360
COMBINED BOQ for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BILL OF QUANTITY-ELECTRICAL - ITBP BASE CAMP
Page 1 of 8
Page 34
(NS) Supplying, installation, testing and commissioning
of microprocessor based addressable main fire
alarm control panel of 4 zone capacity as
complete with batteries, battery charger
illuminated numeric digram complete as required.
0
125000.00 6 750000
(NS) Supplying, fixing and commissioning following
nos. ways audio luminious indicators with rest
buttons and buzzers mounted in concealed GI
sheet steel enclosure including interconnection
numbering etc. complete as required.
a 12 WAY Each 9000.00 1 9000
b 4 WAY Each 5500.00 1 5500
1.10
Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI
box and earthing the point with 1.5 sq.mm. FR
PVC insulated copper conductor single core cable
etc as required.
1.10.1 Group A Point
518.00 704 3,64,672.00
Light
point
585.00 2124 12,42,540.00
Fan point
585.00 600 3,51,000.00
exhaust
point
585.00 385 2,25,225.00
(1.10.3) Wiring for light point / fan point /exhaust fan
point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC Conduit,
with modular switch,modular plate ,suitable GI
Box and earthing the point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable
etc. as required.
a) Group C
Point 718.00 1358 9,75,044.00
1.11
Wiring for twin control light point with 1.5 sq.mm
FR PVC insulated copper conductor single core
cable in surface / recessed medium class PVC
conduit, 2 way modular switch, modular plate,
suitable GI box and earthing the point with 1.5
sq.mm. FR PVC insulated copper conductor single
core cable etc as required.
Point 0.00
770.00 710 5,46,700.00
-1.12 Wiring for light /power plug with 2x4 sq.mm FRLS
PVC insulated copper conductor single core cable
in surface /recessed PVC conduit along with 1 No
4 sq.mm FRLS PVC insulated copper conductor
single core cable for loop earthing as required.
Point 0.00
Meter 162.00 7860 12,73,320.00
-1.13 Wiring for light /power plug with 4x4 sq.mm FRLS
PVC insulated copper conductor single core cable
in surface /recessed PVC conduit along with 2 No
4 sq.mm FRLS PVC insulated copper conductor
single core cable for loop earthing as required.
Meter
0.00
Meter 275 745 2,04,875.00
1.14
Wiring for circuit/ submain wiring alongwith earth
wire with the following sizes of FRLS PVC
insulated copper conductor, single core cable in
surface/ recessed medium class PVC conduit as
required
0.00
(1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire Meter106 3280 3,47,680.00
(1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire Meter0.00
131 5370 7,03,470.00
(1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire Meter0.00
162 470 76,140.00
0.00
1.10.2 Group B Point
Page 2 of 8
Page 35
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 221 885 1,95,585.00
0.00
1.14.5 2 X 10 sq. mm + 1 X 10 sq. mm earth wire 0.00
Metre 327.00 580 1,89,660.00
0.00
1.14.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 597 1635 9,76,095.00
(1.14.11
)
4x16 sq.mm + 2x16 sq.mm earth wire0.00
Mtr. 883 440 3,88,520.00
1.17 Supplying and drawing following sizes of FR PVC
insulated copper conductor, single core cable in
the existing surface/ recessed steel/ PVC conduit
as required.
0.00
1.17.2 2 x 1.5 sq. mm 36.00 3250 1,17,000.00
1.17.3 3 x 1.5 sq. mm 0.00
50.00 3700 1,85,000.00
0.00
1.17.11 3 x 2.5 sq. mm Metre 75.00 8240 6,18,000.00
1.17.21 3 x 4 sq. mm 0.00
109.00 14450 15,75,050.00
1.18 Supplying and drawing following pair 0.5 sq mm
FR PVC insulated annealed copper conductor,
unarmored telephone cable in the existing
surface/ recessed steel/ PVC conduit as required.
0.00
1.18.2 2 Pair 18.00 3151 56,718.00
1.19
Supplying and drawing co-axial TV cable RG-6
grade, 0.7 mm solid copper conductor PE
insulated, shielded with fine tinned copper braid
and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
Mtr. 0.00
28 3460.00 96,880.00
1.21
Supplying and fixing of following sizes of medium
class PVC conduit along with accessories in
surface/recess including cutting the wall and
making good the same in case of recessed conduit
as required.
0.00
1.21.1 20 mm Mtr. 53 7480 3,96,440.00
1.21.2 25 mm 0.00
Mtr. 65 18315.00 11,90,475.00
1.21.3 32 mm 0.00
Metre 85.00 3415 2,90,275.00
1.24 Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
including connections but excluding modular plate
etc. as required.
0.00
1.24.6 Telephone socket outlet 0.00
Each 95.00 266 25,270.00
1.24.7 TV antenna socket outlet 0.00
94.00 405 38,070.00
1.24.8 Bell push 0.00
111.00 42 4,662.00
1.25
Supplying and fixing stepped type electronic fan
regulator on the existing modular plate switch box
including connections but excluding modular plate
etc. as required.
0.00
284.00 956 2,71,504.00
1.26
Supplying and fixing modular blanking plate on
the existing modular plate & switch box excluding
modular plate as required.
0.00
23.00 1366 31,418.00
1.27 Supplying and fixing following size/ modules, GI
box alongwith modular base & cover plate for
modular switches in recess etc as required.0.00
1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 522 86,652.00
1.31
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6
amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For
light plugs to be used in non residential buildings).
0.00
303.00 2284 6,92,052.00
1.32
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in
recess, including providing and fixing 6 pin 5/6 &
15/16 amps modular socket outlet and 15/16
amps modular switch, connection etc. as required.
0.00
395.00 1519 6,00,005.00
1.34Supplying and fixing brass batten/ angle holder
including connection etc. as required.0.00
Page 3 of 8
Page 36
74.00 1871 1,38,454.00
1.38 Supplying and fixing call bell/ buzzer suitable for
single phase, 230 volts, complete as required.
0.00
Each 61 140 8,540.00
1.41
Installation, testing and commissioning of pre-
wired, fluorescent fitting / compact fluorescent
fitting/ LED of all types, complete with all
accessories and tube etc. directly on ceiling/ wall,
including connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable and
earthing etc. as required
0.00
91 650 59,150.00
1.44 Installation, testing and commissioning of ceiling
fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable etc.
as required.
0.00
Each 95 228 21,660.00
1.45
Installation, testing and commissioning of ceiling
fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable,
including providing and fixing phenolic laminated
sheet cover on the fan box etc. as required.
0.00
122 728 88,816.00
1.5 Installtion of exhasut fan up to 450 mm sweep in
the existing opening, including making the hole to
suit the size of the abvoe fan, making good the
damage, connection testiing and commissioning
etc as requried
0.00
Each 204 71 14,484.00
1.50Installation of exhaust fan in the existing opening,
including making good the damage, connection,
testing, commissioning etc. as required.
0.00
1.50.1 Upto 450 mm sweep Each 204 489 99,756.00
1.51Extra for fixing the louvers/ shutters complete
with frame for a exhaust fan of all sizes.0.00
90.00 428 38,520.00
2.7 Supplying and fixing following way prewired SP&N
MCB distribution board of steel sheet for 240 volts
on surface/ recess complete with loose wire box,
terminal connectors for all incoming and outgoing
circuits, duly prewired with suitable size FR PVC
insulated copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din
bar, detachable gland plate, interconnections,
powder painted including earthing etc. as
required. (But without MCB/ RCCB/ Isolator)
0.00
2.7.4 4(2+4) Each 2508.00 2 5,016.00
2.7.5 2 + 8 way, Double door Each 2995.00 37 1,10,815.00
2.7.6 2 + 12 way, Double door 0.00
Each 3613.00 32 1,15,616.00
2.8 Supplying and fixing following way prewired TP&N
MCB distribution board of steel sheet for 415 volts
on surface/ recess complete with loose wire box,
terminal connectors for all incoming and outgoing
circuits, duly prewired with suitable size FR PVC
insulated copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din
bar, detachable gland plate, interconnections,
powder painted including earthing etc. as
required.(But without MCB/ RCCB/ Isolator)
0.00
(2.8.5) 4 way (4+12) Double door Each 7357 6 44,142.00
0.00
(2.8.6) 6 way (4+18) Double door Each 9496 10 94,960.00
0.002.8.7 8 way (4 + 24), Double door Each 10405 99 10,30,095.00
0.00
2.8.8 12 way (4 + 36), Double door Each 12782 97 12,39,854.00
2.9.5 4W-2DR 7901 3 23,703.00
2.10
Supplying and fixing 5 amps to 32 amps rating,
240/415 volts, "C" curve, miniature circuit breaker
suitable for inductive load of following poles in
the existing MCB DB complete with connections,
testing and commissioning etc. as required
0.00
2.10.1 Single pole Each 169 3393 5,73,417.00
Page 4 of 8
Page 37
2.10.5 3POLE Each 696 60 41,760.00
2.12 Supplying and fixing following rating, double pole,
240 volts, isolator in the existing MCB DB
complete with connections, testing and
commissioning etc. as required.
0.00
2.12.1 40 amps Each 218 25 5,450.00
2.12.2 63 amps 0.00
Each 250 8 2,000.00
2.13
Supplying and fixing following rating, four pole,
415 volts, isolator MCB in the existing MCB DB
complete with connections, testing and
commissioning etc. as required.
0.00
2.13.2 63 amps Each 670 131 87,770.002.13.3 63 amps Each 851 6 5,106.00
2.14
Supplying and fixing following rating, double pole,
(single phase and neutral), 240 volts, residual
current circuit breaker (RCCB), having a sensitivity
current upto 300 milliamperes in the existing MCB
DB complete with connections, testing and
commissioning etc. as required
0.00
(2.14.1) a) 25 amps Each 1645 20 32,900.00
0.00
(2.14.2) a) 40 amps Each 1714 40 68,560.00
0.00
2.14.3 63 amps Each 2237 171 3,82,527.00
2.18
Supplying and fixing 20 amps, 240 volts, SPN
industrial type, socket outlet, with 2 pole and
earth, metal enclosed plug top alongwith 20 amps
"C" curve, SP, MCB, in sheet steel enclosure, on
surface or in recess, with chained metal cover for
the socket out let and complete with connections,
testing and commissioning etc. as required.
0.00
954 82 78,228.00
(2.20) Supplying and fixing 30 amps, 415 volts TPN
industrial type, socket outlet with 4 pole and earth
metal enclosed plug top along with 30 amps 'C'
Curve, TP, MCB in sheet steel encloser on
surface or in recess with chained metal cover for
the socket outlet and complete with conncections,
testing & commissioning etc as required.
0.00
Each 2473 9 22,257.00
5.2 Earthing with G.I. earth pipe 4.5 metre long, 40
mm dia including accessories, and providing
masonry enclosure with cover plate having locking
arrangement and watering pipe etc. with
charcoal/ coke and salt as required.
Set 3926 2 7,852.00
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X
6 mm thick including accessories, and providing
masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long
etc. with charcoal/ coke and salt as required.
0.00
4490 61 2,73,890.00
(5.6) Earthing with Copper earth plate 600 mm x 600
mm x 3 mm thick including accessories and
providing masonary enclosure with cover plate
having locking arrangement and watering pipe of
2.7 mtr long etc. with charoal or coke and salt as
required.
Set 9292 4 37,168.00
(5.8) Supplying and laying 25 mm x 5 mm Copper strip
at 0.50 meter below ground as strip earth
electrode , including connection/terminating with
G.I. nut, bolt, spring, washer etc. as required.
Set 753 300 2,25,900.00
5.9
Supplying and laying 25 mm X 5 mm G.I strip at
0.50 metre below ground as strip earth electrode,
including connection/ terminating with G.I. nut,
bolt, spring, washer etc. as required. (Jointing
shall be done by overlapping and with 2 sets of
G.I. nut bolt & spring washer spaced at 50mm)
0.00
109.00 1560 1,70,040.00
5.11
Providing and fixing 25 mm X 5 mm G.I. strip in 40
mm dia G.I. pipe from earth electrode including
connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required.
0.00
421.00 850 3,57,850.00
5.16 Providing and fixing 6 SWG dia G.I. wire on
surface or in recess for loop earthing as required.
Page 5 of 8
Page 38
Metre 700.00 20 14,000.00
6.2
Providing and fixing of lightning conductor finial,
made of 25 mm dia 300 mm long, G.I. tube,
having single prong at top, with 85 mm dia 6 mm
thick G.I. base plate including holes etc. complete
as required.
0.00
369.00 22 8,118.00
6.4 72.00 2 144.00
6.7
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or surface of wall for lightning
conductor complete as required.(For horizontal
run)
0.00
68.00 1560 1,06,080.00
6.8
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or surface of wall for lightning
conductor complete as required.(For vertical run)
0.00
98.00 320 31,360.00
6.9 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on
parapet or surface of wall for lightning conductor
complete as required.(For horizontal run)0.00
35.00 280 9,800.00
0.00
6.10 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on
parapet or surface of wall for lightning conductor
complete as required.(For vertical run)0.00
72.00 459 33,048.00
0.00
6.12 Providing and fixing testing joint made of 20mm x
3mm thick GI strip, 125mm long with 4 Nos. GI
bolts,nuts,chuck nuts and spring washers etc.
complete as required. (6.12)
0.00
71.00 32 2,272.00
6.14 Providing and laying GI tape 32mm x 6mm from
earth electrode directly in ground as required.
(6.14)
0.00
141 650 91,650.00
7.1 Laying of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of
following size direct in ground including
excavation, sand cushioning, protective covering
and refilling the trench etc as required.
0.00
7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 202 1290 2,60,580.00
0.00
7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 210 240 50,400.00
MR E-
12
Supply of 3.5 cx95 sq. Mm Aluminium Arm cable ,
1.1 kv grade XLPE insulated0.00
3C95 600 1290.00 7,74,000.00
3C150 1000 240.00 2,40,000.00
MR-RA
E-1,2,2^
Supplying of following type recessed / surface
mounted fluorescent light fixture complete with
electronic choke earthing point and with TL-5 /
CFL lamps complete as required.
0.00 0.00
Supply of lighting CFL bulbs 18 watt. Each 223 1420 3,16,660.00
0.00 0
Supply of 1X 36 watt tube light. 1200 989 11,86,800.00
MR-RA
E-3
Supplying ,testing and commissioning of motion
sensor device for controlling lights .0.00 0
Each 1600 42 67,200.00
MR E-6
Supply of exhaust fan with 250 mm sweep with
rust proof body and noice less operation complete
with louvers.
0
Each 1525.00 240 3,66,000.00
MR E-7
Supply , fixing testing and commissioning of
desert cooler with suitable size , body of
minimum 20 SWG GI sheet of .8 mm thick with
fan GEC motor 30' and of Honey Comb paper pad
(three speed -high ,medium and low , air delivery
4500 m3/hour) with metallic blade duly painted
with anti corrosive oven cured paint fitted with
the body, pump motor duly assembled and
complete in all respect .
0
Each 14300.00 440 62,92,000.00
MR E-8
Supply , fixing testing and commissioning of
water cooler (ISI )with 150 ltr/ hour cooling
capacity , 150 ltr storage capacity with 2 faucets
complete in all respect
0
Each 65700.00 6 3,94,200.00
Page 6 of 8
Page 39
MR E-
11
Supplying ,installation ,testing and
commissioning of cubical type LT panel
suitable for 415 V, 3 phase 4 wire 50 Hz AC
supply , fabricated in compartmentalized
design from CRCA sheet of 2 mm thickfor
frame work and covers , 3 mm thick for gland
plates i/c cleaning and finishing complete
with 7 tank process for powder coating in
approved shade having 200 Amp. capacity
extentible type TPN aluminium alloy bus-bars
of high conductivity ,DMC/SMC bus bar
support with short circuit withstand capacity
of 31 MVA for 1 sec. ,bottom base channel of
MS section not less than 100mmx50mmx5
mm thick fabrication shall be done in
transportable section ,intire panel shall have
a comman copper earth busbar of size
25mmx5 mm at the rear with 2 no. earth
stud,solid connections from main bus bar to
switch gears with required size of AL. bus
bars and control wiring .
Incoming:
160 Amp TP +N MCCB,35 KA (Ics=Icu upto 433 V)
CT of ratio 160/5 Amps = 3 no.
Multifunction meter - V,I,KWH,PF
3 nos. phase indication LED lampswith 6 Amp
backup MCB
Outgoing:
100 Amp 4 pole MCCB=1 No.
10 no. 63 Amp. 4 pole MCB ,C Curve
2 no. 63 Amp. double pole MCB,curve
Set 150000 3 4,50,000.00
MR
Supplying and fixing of the following sheet steel
clad wall / recess mounting telephone tag blocks
of krone make constructed from 14 SWG sheet
steel finished with red oxide coating of two coats
of paint with hinged gasketted powder coated
door and complete.0
Set 1000 8 8,000.00
MR - RA
E-1
Supply of 3cx150 sq. Mm Aluminium Arm cable ,
1.1 kv grade XLPE insulated 0
Set 1000 240 2,40,000.00
0.00
MR - RA
E-3Supply of lighting CFL bulbs ( 8 Watt to 14 watt) 0.00
223 449 1,00,127.00
MR - RA
E-4Supply of 28 watt tube light. 0.00
904 242 2,18,768.00
MR - RA
E-5
Supplying of 1200mm A.C Ceiling fan sweep
complete 0.00
Each 1600 256 4,09,600.00
MR - RA
E-6
Supply of exhaust fan with 300 mm sweep with
rust proof body and noise less operation complete
with louvers. 0
1470 132 1,94,040.00
MR - RA
E-7
Supplying ,installation ,testing and commissioning
of cubical type meter panel board suitable for 415
V, 3 phase 4 wire 50 Hz AC supply , fabricated in
compartmentalized design from CRCA sheet of 2
mm thick for frame work and covers , 3 mm thick
for gland plates i/c cleaning and finishing
complete with 7 tank process for powder coating
in approved shade having 200 Amp. capacity
extendable type TPN aluminium alloy bus-bars of
high conductivity ,DMC/SMC bus bar support with
short circuit withstand capacity of 31 MVA for 1
sec. ,bottom base channel of MS section not less
than 100mmx50mmx5 mm thick fabrication shall
be done in transportable section ,entire panel
shall have a common copper earth bus bar of size
25mmx5 mm at the rear with 2 no. earth
stud,solid connections from main bus bar to
switch gears with required size of AL. bus bars and
control wiring .
0
257000 2 5,14,000.00
Page 7 of 8
Page 40
MR - RA
E-8
Supplying ,installation ,testing and commissioning
of cubical type meter panel board suitable for 415
V, 3 phase 4 wire 50 Hz AC supply , fabricated in
compartmentalized design from CRCA sheet of 2
mm thick for frame work and covers , 3 mm thick
for gland plates i/c cleaning and finishing
complete with 7 tank process for powder coating
in approved shade having 200 Amp. capacity
extendable type TPN aluminium alloy bus-bars of
high conductivity ,DMC/SMC bus bar support with
short circuit withstand capacity of 31 MVA for 1
sec. ,bottom base channel of MS section not less
than 100mmx50mmx5 mm thick fabrication shall
be done in transportable section ,entire panel
shall have a common copper earth bus bar of size
25mmx5 mm at the rear with 2 no. earth
stud,solid connections from main bus bar to
switch gears with required size of AL. bus bars and
control wiring .
237000 2 4,74,000.00
MR E-7
Supply , fixing testing and commissioning of
desert cooler with suitable size , body of
minimum 20 SWG GI sheet of .8 mm thick with
fan GEC motor 30' and of Honey Comb paper pad
(three speed -high ,medium and low , air delivery
4500 m3/hour) with metallic blade duly painted
with anti corrosive oven cured paint fitted with
the body, pump motor duly assembled and
complete in all respect .
Each 14300 120 17,16,000.00
MR E-8
Supply , fixing testing and commissioning of
water cooler (ISI )with 150 ltr/ hour cooling
capacity , 150 ltr storage capacity with 2 faucets
complete in all respect
0.00
Each 65700 6 3,94,200.00
(NS) Supplying of following type recessed / surface
mounted fluorescent light fixture complete with
electronic choke earthing point and with TL-5 /
CFL lamps complete as required. (HAVELLS /
BAJAJ / WIPRO)
0.00
d) 18W LED Batton (4') 0.00
Each 650 20 13,000.00
MR
Supplying, Fixing, Testing & Commitioning of High
quality, compact and aesthetically designed wall
mounting box speaker to suit interiors as in
Offices & Office Buildings. Clear and clean sound
for speech and music. 8W/100V capacity of
reputed brand.
Each 1400 120 1,68,000.00
(NS) Ceiling Light Point for fall ceiling 0.00
b) 8W LED 0.00
Each 2500 124 3,10,000.00
(NS) Supplying, installation, testing and commissioning
of microprocessor based addressable main fire
alarm control panel of 2 zone capacity as
complete with batteries, battery charger
illuminated numeric digram complete as required.
No. 75000 2 1,50,000.00
0.00
MR Water Coolers Each 15000 20 3,00,000.00
MR AIR Coolers
Each 10000 140 14,00,000.00
212,40,365.00 253,19,965.00
fire fighting system 9,06,150.00
Solar System 4,80,000.00
479,46,480.00
Total=
Grand Total=
Page 8 of 8
Page 41
PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"
BILL OF QUANTITIES - FIRE FIGHTING WORKS
S. NO. DESCRIPTION UNIT QTY. RATE TOTAL
A. PIPING & VALVES
1 Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports &
fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E'
etc. to complete the work as per the requirement at site including painting with one coat of
primer after surface preparartion and two coats of synthetic enamel paint, cutting and
making good the walls good complete. Pipe upto 40 mm dia threaded joints with holdtite,
50 mm dia and above should be welded joint ( all type ) ( internal works/External Works).
a. 50 mm dia. RM 12 360.00 4,320.00
b. 25mm dia RM 6 1300.00 7,800.00
c. 150mm dia RM 108 1800.00 1,94,400.00
2 Providing and fixing cast iron dual plate wafer type non return valves of PN1.6 including
nuts, bolts,1.5mm thick compressed asbestos gasket including matching flanges as per
table "E" complete
a. 150 mm dia. Nos 1 8200.00 8,200.00
3 Providing and fixing C.I. butterfly valves PN 1.6 complete with bolts, nuts 1.5mm thick
compressed asbestos gasket companion flanges as per table "E" complete.
a. 150 mm dia with lever Nos 12 6500.00 78,000.00
4 Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed
female ends tested to 20 Kg/ cm2 of approved quality as specified.
a. 50 mm dia. Nos 10 900.00 9,000.00
5 Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia..
Nos 2 1200.00 2,400.00
6 Providing and fixing blank flanges as per table 'E' with asbestos gasket, nut, bolts, washers
complete
a. 150 mm dia. Nos 2 600 1,200.00
TOTAL C/F TO SUMMARY 3,05,320.00
B. FIRE HYDRANT ACCESSORIES
-1-
Page 42
PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"
BILL OF QUANTITIES - FIRE FIGHTING WORKS
S. NO. DESCRIPTION UNIT QTY. RATE TOTAL
1 Providing and fixing SS306 Single headed landing valve conforming to IS -5290 (Type-A)
with 63 mm dia. single instantaneous female coupling on the outlet SS316 metal blank cap
and chain, necessary companion flanges, nuts, bolts, washer and gasket complete as per
specification. (ISI marked). All parts and body shall be of SS306 as per IS:5290.
a. Single outlet Nos 10 5500.00 55,000.00
2 Providing and fixing first aid fire hose reel drum wall mounting, swinging type(Powder
coated finish in fire red) fitted with 20 mm dia. 30 m long high pressure hose(IS:12585,
Type-2) with 5 mm outlet SS nozzle with shut off valve (IS:8090). Name of
Manufacturer should be embossed on the drum and complete hose reel drum shall be
conforming to IS:884) Nos 8 6000.00 48,000.00
3 Providing and fixing 63 mm dia. 15m long rubberized lined hose including SS306 male and
female instantaneous type coupling approved by fire authority, machine wound with
copper wire complete in all respects. Hose shall conform to IS 636 Type-A and coupling to
IS 903 -1975 ( ISI marked) Nos 20 4800.00 96,000.00
4 Providing and fixing standard short size SS306 branch pipe with gunmetal nozzle 16 mm
dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked, IS:903)
Nos 10 2500.00 25,000.00
5 Providing and fixing door with frame for all internal fire hydrants fabricated from 20x20x3
mm and 40x20x3 mm aluminium hollow box sections mounted with 3 no. of 100 mm
Aluminium butt hinge on Aluminium angle frame of 45x45x5 mm size with hold fasts fixed
to wall with P.C.C. (1:2:4) blocks 100x100x100 mm including 2 nos allen key lock for
locking along with padlock arrangement & fully glazed with 4 mm thick float glass
approved by local Fire Authority, powder coated fire red finish with " fire hose' written on
front suitable to house 15 mm long two length of canvas hose with couplings, one no of
branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire
hose and supports for hoses, branch pipes, Axe and hose reel. Size 2100x 900 mm
complete as per approved design including necessary fixing arrangement for hoses & axe
and branch pipe.)
Nos 8 7600.00 60,800.00
-2-
Page 43
PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"
BILL OF QUANTITIES - FIRE FIGHTING WORKS
S. NO. DESCRIPTION UNIT QTY. RATE TOTAL
6 Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested
for 20 Kg/cm2 with 63 mm dia. instantaneous type inlet and 100/150mm dia.. flanged
outlet with built-in check valve for fire brigade connection to under ground tanks and fire
risers including companion flanges as portable " E" including nuts, bolts & washers etc.
a. Three way Nos 1 10000.00 10,000.00
7 Providing and fixing gunmetal fire brigade suction 150 mm dia. for fire tank complete with
PVC Cap companion flange as per table "E" nuts, bolts, gasket etc
150 mm Nos. 1 7500.00 7,500.00
8 Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and
confirming to IS :926. Nos. 8 470.00 3,760.00
8 Air Cushion Tank for Risers
Providing and fixing of air vessel of the following specifications fabricated with MS Pipe of
thickness specified.
specifications
a. Diameter : 200 mm
b. Shell Thickness: 6.35 mm
c. Dish Ends : 10 mm
d. Height : 1000 mm
e. Finishing: Two coats of red enamal
paint over primer out side and two
coats of epoxy coating inside.
f. Material of construction: M.S
g. Test Pressure: 20 Kg/Sq.Cm.
i. Height of supporting legs: 400 mm
j. Quantity Each 2 15225.00 30,450.00
Note: Contractor should submit general arrangement drawings before fabrication of vessel
and ultrosonic test report to be submitted on supply of vessel and test to be conducted at
the presence of Plumbing-In-Charge. Also cost shall include two nos. Gunmetal NRV(ISI
Marked)
-3-
Page 44
PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"
BILL OF QUANTITIES - FIRE FIGHTING WORKS
S. NO. DESCRIPTION UNIT QTY. RATE TOTAL
9 Providing and fixing "Y" suction strainer with flanged connection 150 mm dia. suitable
for 2280 lpm discharge with stainless steel 20 mesh complete including companion
flanges etc. suitable for 150 dia. inlet and 150 dia. outlet including inside with rubberized
paint and outside with two coats of enamel paint of approved shade after surface
preparation necessary stainless steel nuts, bolts, washers etc..
Nos 1 15000.00 15,000.00
TOTAL C/F TO SUMMARY 3,51,510.00
C. TERRACE FIRE FIGHTING PUMPS & EQUIPMENT
Notes: Each Pumps will be provided with mechanical seal, Love joy coupling, coupling
guard, base frame, anti-vibration pads, bourdon pressure gauge, anti-vibration pipe
sections on suction and delivery, cable and earth wire from pump motor to motor control
panel. Cable size from pump to control panel will be 3cx16sqmm copper conductor
armoured cable. Each pump shall be of CI body, bronze impeller, SS shaft and mechanical
seal
1. Supplying, installing, testing & commissioning of electric driven automatic pressurisation
pump set consisting of the following :
Each 1 125000.00 1,25,000.00
Horizontally mounted centrifugal end suction type Terrace pump complete for delivery of
900 ltrs/minute against a total head of 35 metres approx complete with arrangement for
testing of the working of the pumping set as required. Rate shall also include Mechanical
Seal.
Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable 10 HP rating
for the above pum with synchronous speed of 2900 RPM T.E.F.C. type such as confirming
to IPL55 and flexible coupling and coupling guard with the pump.
Common bed plate of fabricated mild steel channel or cast iron type.
-4-
Page 45
PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"
BILL OF QUANTITIES - FIRE FIGHTING WORKS
S. NO. DESCRIPTION UNIT QTY. RATE TOTAL
2 Manufacturing supplying installation testing and commissioning of common control pannel
for fire fighting pump system comprising of Terrace pump. All the components shall be
housed in 2 MM thick CRCA MS Sheet. The control pannel shall be cubical type dust and
vermin proof hinged and lockable doors and deed friend operation. The panel shall be
powder coated with siemense gray and doors will be sky blue. All internal control wiring
shall be 1.5 MM sqm copper provided. Seperate compartment for each
motor/pumpstarter, busbar chamber, cable alley and in comer. All MCCB shall be door
lockable type copper earthing bus bar shall be provided, control panel shall also be
provided with potential free contacts for Building management system and level controller
for all the pumps for dry run protection. Panel is complete with following
Each 1 35000.00 35,000.00
Panel shall be complete with 40A MCB(35 KA) main incomer, phase indicating lights with 6
A MCB, Voltmeter to read voltage between 0-440V with voltage selector switch,
Amperemeter to read current between 0-250 A with ampere selector switch, 32A(10 KA)
MCB with socket for welding, 1 No. DOL starter for pump, 1 No. auto manual switch , 1 No
single phase preventors complete with earthing of panel and motors.
TOTAL C/F TO SUMMARY 1,60,000.00
E. FIRE EXTINGUISHERS & MISC. ITEMS
1 Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical
body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high
pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683
finished externally with red enamel paint and fixed to wall with brackets with rawl
plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor
should submit test certificate form manufacturer along with serial number of every
extinguishers supplied.)
Nos 8 6597.50 52,780.00
2 Providing and fixing ABC powder type fire extinguishers consisting of welded M.S.
cylindrical body automatic modular ABC powder type extinguisher actuated through a
sprinkler head mounted on The extinguisher body finished externally with red enamel paint
and fixed to ceiling with brackets complete with internal charge. [For Transformer/DG/LT
panel room]
a. Capacity 4 Kg.(IS:15683) Nos 8 3045.00 24,360.00
-5-
Page 46
PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"
BILL OF QUANTITIES - FIRE FIGHTING WORKS
S. NO. DESCRIPTION UNIT QTY. RATE TOTAL
3 Providing and fixing of self illuminated / auto glow "EXIT" signs printed on
photoluminescent sheet containing self illuminated base chemical, of appropriate size not
less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as
required and as directed at site. Nos 12 1,015.00 12,180.00
TOTAL C/F TO SUMMARY 89,320.00
9,06,150.00
-6-
Page 47
S.No. Description Unit Rate Qty. Amount
1. MR Providing and fixing solar water heater without
electrical back-up with following specs:
System capacity:125 LPD
System type:Thermosyphon Circulation
SOLAR COLLECTORS
Type of collector:Cu-Cu, Ultra sonically welded
Size of collector:2080x1070x100mm
Absorber area:2 sqm
Absorber Coating:Selective coated black chrome
Nelson
Collectors absorbtivity:>0.95
Collectors emmissivity:<0.20
Collector box material:Extruded Aluminium frame
1.4mm
Fin width:120mm
Hardware:SS-304
Weight:40 Kgs(Dry)
INSULATING MATERIAL FOR SOLAR COLLECTORS
Material:Rockwool
Thickness of bottom insulation:50mm :
Thickness of side insulation:25mm
Thermal conductivity:0.029 W/mk
Density:40 Kg./cum
COLLECTOR’S GLAZING MATERIAL :
Material:Toughned clear glass
Thickness:4mm
Transitivity:88%
Glass Beeding:EPDM
COLLECTOR’S STANDS
Material:30x30x3mm thick
ANNEX -4D BOQ FOR SOLAR WATER SYSTEM
Page 48
S.No. Description Unit Rate Qty. Amount
Details of protective coating:powder coated
HOT WATER STORAGE TANK
No. of tank with capacity: 1 No 125 lts
Material:SS-304
Capacity:125 lts.
Insulating material for tank:Glass wool
Thermal conductivity of insulation:0.028 to 0.033
W/mk :
Density of insulation material:48 Kg/cum
Thickness of insulation material:100mm :
Cladding material:Al 22 SWG
SYSTEM PIPING:GI B class (IS:1239)
Pipe fitting :ISI Marked
Valves:Gunmetal
Insulation:Glass wool
Insulation material density:48kg/m
Insulation thickness:50mm
Insulation cover:Wiremesh finished with aluminium
cladding
INSTRUMATION & CONTROLS
Water meter
Type:IS marked
Material:Gunmetal
Vane type:Metallic form designed
End connection:screwed end
Temperature Gauge
Type:Dial gauge, mercury in type tube
Material:SS stem
Vane type:0-120 deg celcius
End connection:1/2" BSP
Gate valve
Type:Screwed
Material:Gunmetal
Page 49
S.No. Description Unit Rate Qty. Amount
Make:ISI Quality
Strainer
Type:Y type
Material:cast Iron
Purpose:Filtration of suspended material Set 40000 4 160000.00
For 03 barracks = ( 160000x 03 =480000) 4,80,000.00
Page 50
DSR
Item
no.
Description
UnitRate (in
Rs.)Total
DSR N.DSR
1.10
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FR PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated
copper conductor single core cable etc as required.
Light point 585.00 197 115245
Fan point 585.00 75 43875
exhaust
point585.00 33 19305
1.11
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit,
2 way modular switch, modular plate, suitable GI box and earthing the point
with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as
required.Point 770.00 144 110880
1.10.2
Group B
Point
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (BARRACKS )
ANNEX-4B :Estimate for providing internal Electrical installation in barracks to be constructed in ITBP Chapra(Bihar)
Total Amount
Page 51
1.14
Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FRLS PVC insulated copper conductor, single core cable in surface/
recessed medium class PVC conduit as required
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 221.00 60 13260
1.14.104 X 10 sq. mm + 2 X 10 sq. mm earth wire
Mtr. 597 440 262680
1.17 Supplying and drawing following sizes of FR PVC insulated copper conductor,
single core cable in the existing surface/ recessed steel/ PVC conduit as
required.1.17.2 2 x 1.5 sq. mm Metre 36.00 920 33120
1.17.3 3 x 1.5 sq. mm Metre 50.00 240 12000
1.17.11 3 x 2.5 sq. mm Metre 75.00 1680 126000
1.17.21 3 x 4 sq. mm
Metre109.00 1800 196200
1.18 Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed
copper conductor, unarmored telephone cable in the existing surface/
recessed steel/ PVC conduit as required.1.18.2 2 Pair Metre 18.00 80 1440
1.19
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
required.
Mtr. 28 50 1400
1.21
Supplying and fixing of following sizes of medium class PVC conduit along
with accessories in surface/recess including cutting the wall and making good
the same in case of recessed conduit as required.
1.21.1 20 mm Mtr. 53 1320 69960
1.21.2 25 mm Mtr. 65 2340 152100
1.21.3 32 mm Metre 85.00 200 17000
Page 52
1.24 Supplying and fixing following modular switch/ socket on the existing
modular plate & switch box including connections but excluding modular
plate etc. as required.
1.24.6 Telephone socket outlet Each 95.00 2 190
1.24.7 TV antenna socket outlet Each 94.00 1 94
1.25
Supplying and fixing stepped type electronic fan regulator on the existing
modular plate switch box including connections but excluding modular plate
etc. as required.
Each 284.00 75 21300
1.26
Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required. Each 23.00 134 3082
1.27 Supplying and fixing following size/ modules, GI box alongwith modular base
& cover plate for modular switches in recess etc as required.
1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 134 22244
1.31
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess, including providing and fixing 3 pin 5/6 amps
modular socket outlet and 5/6 amps modular switch, connection etc. as
required. (For light plugs to be used in non residential buildings).Each 303.00 180 54540
1.32
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16
amps modular socket outlet and 15/16 amps modular switch, connection
etc. as required.Each 395.00 15 5925
1.34Supplying and fixing brass batten/ angle holder including connection etc. as
required.Each 74.00 140 10360
Page 53
1.38Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts,
complete as required.Each 61 6 366
1.41
Installation, testing and commissioning of pre-wired, fluorescent fitting /
compact fluorescent fitting/ LED of all types, complete with all accessories
and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm
FRLS PVC insulated, copper conductor, single core cable and earthing etc. as
required
Each 91 341 31031
1.45
Installation, testing and commissioning of ceiling fan, including wiring the
down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable, including providing and fixing
phenolic laminated sheet cover on the fan box etc. as required.Each 122 75 9150
1.50
Installation of exhaust fan in the existing opening, including making good the
damage, connection, testing, commissioning etc. as required.
1.50.1 Upto 450 mm sweep Each 204 39 7956
1.51Extra for fixing the louvers/ shutters complete with frame for a exhaust fan
of all sizes.Each 90.00 39 3510
2.7 Supplying and fixing following way prewired SP&N MCB distribution board of
steel sheet for 240 volts on surface/ recess complete with loose wire box,
terminal connectors for all incoming and outgoing circuits, duly prewired
with suitable size FR PVC insulated copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din bar, detachable gland
plate, interconnections, powder painted including earthing etc. as required.
(But without MCB/ RCCB/ Isolator)
2.7.5 2 + 8 way, Double door Each 2995.00 1 2995
Page 54
2.8 Supplying and fixing following way prewired TP&N MCB distribution board of
steel sheet for 415 volts on surface/ recess complete with loose wire box,
terminal connectors for all incoming and outgoing circuits, duly prewired
with suitable size FR PVC insulated copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din bar, detachable gland
plate, interconnections, powder painted including earthing etc. as
required.(But without MCB/ RCCB/ Isolator)
2.8.7 8 way (4 + 24), Double door Each 10405 4 41620
2.8.8 12 way (4 + 36), Double door Each 12782 4 51128
2.10
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the
existing MCB DB complete with connections, testing and commissioning etc.
as required
2.10.1 Single pole Each 169 195 32955
2.12 Supplying and fixing following rating, double pole, 240 volts, isolator in the
existing MCB DB complete with connections, testing and commissioning etc.
as required.
2.12.1 40 amps Each 218 1 218
2.13
Supplying and fixing following rating, four pole, 415 volts, isolator MCB in the
existing MCB DB complete with connections, testing and commissioning etc.
as required.
2.13.2 63 amps Each 670 8 5360
Page 55
2.14
Supplying and fixing following rating, double pole, (single phase and neutral),
240 volts, residual current circuit breaker (RCCB), having a sensitivity current
upto 300 milliamperes in the existing MCB DB complete with connections,
testing and commissioning etc. as required
2.14.3 63 amps Each 2237 24 53688
2.18
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet,
with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve,
SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal
cover for the socket out let and complete with connections, testing and
commissioning etc. as required. Each 954 2 1908
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke
and salt as required.Set 4490 4 17960
5.9
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as
strip earth electrode, including connection/ terminating with G.I. nut, bolt,
spring, washer etc. as required. (Jointing shall be done by overlapping and
with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) Metre 109.00 50 5450
5.11
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from
earth electrode including connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required.
Metre 421.00 60 25260
Page 56
6.2
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm
long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I.
base plate including holes etc. complete as required. Each 369.00 2 738
6.7
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of
wall for lightning conductor complete as required.(For horizontal run)Metre 68.00 120 8160
6.8
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of
wall for lightning conductor complete as required.(For vertical run)Metre 98.00 40 3920
6.12 Providing and fixing testing joint made of 20mm x 3mm thick GI strip,
125mm long with 4 Nos. GI bolts,nuts,chuck nuts and spring washers etc.
complete as required. (6.12) Nos. 71.00 4 284
6.14 Providing and laying GI tape 32mm x 6mm from earth electrode directly in
ground as required. (6.14)Mtr. 141 50 7050
7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
1.1 KV grade of following size direct in ground including excavation, sand
cushioning, protective covering and refilling the trench etc as required.
7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 202 180 36360
Page 57
MR E-
12
Supply of 3.5 cx95 sq. Mm Aluminium Arm cable , 1.1 kv grade XLPE
insulated
Metre
600 180 108000
MR-RA
E-
1,2,2^
Supplying of following type recessed / surface mounted fluorescent light
fixture complete with electronic choke earthing point and with TL-5 / CFL
lamps complete as required.
Supply of lighting CFL bulbs 18 watt. Each 223 140 31220
Supply of 1X 28 watt tube light. Each 1200 223 267600
MR-RA
E-3
Supplying ,testing and commissioning of motion sensor device for
controlling lights .Each 1600 14 22400
MR E-4
Supplying of ceiling fan, complete with blades with suitable length of down
rods shackle insulator earthing point including connection etc . as required.-
(1200 SWEEP)Each 1600.00 75 120000
MR E-5Supplying of 305 mm 1400 RPM exhaust fan complete with louver and bird
guard screen with 3 core flexible wire as required.Each 1760.00 33 58080
MR
Supplying, Fixing, Testing & Commitioning of High quality, compact and
aesthetically designed wall mounting box speaker to suit interiors as in
Offices & Office Buildings. Clear and clean sound for speech and music.
8W/100V capacity of reputed brand.Each 1400.00 40 56000
Page 58
MR E-
10
Supplying, Fixing, Testing & Commitioning Four Zone Amplifier with mic and
should be ideal for multi-speaker installations where a user needs to
separately set power levels for Four separate areas of 1000 Watt capacity
complete in all respect and as required. Each 15000.00 1 15000
MR E-
11
Supplying ,installation ,testing and commissioning of cubical type LT
panel suitable for 415 V, 3 phase 4 wire 50 Hz AC supply , fabricated in
compartmentalized design from CRCA sheet of 2 mm thickfor frame
work and covers , 3 mm thick for gland plates i/c cleaning and finishing
complete with 7 tank process for powder coating in approved shade
having 200 Amp. capacity extentible type TPN aluminium alloy bus-
bars of high conductivity ,DMC/SMC bus bar support with short circuit
withstand capacity of 31 MVA for 1 sec. ,bottom base channel of MS
section not less than 100mmx50mmx5 mm thick fabrication shall be
done in transportable section ,intire panel shall have a comman
copper earth busbar of size 25mmx5 mm at the rear with 2 no. earth
stud,solid connections from main bus bar to switch gears with
required size of AL. bus bars and control wiring .
Incoming:
160 Amp TP +N MCCB,35 KA (Ics=Icu upto 433 V)
CT of ratio 160/5 Amps = 3 no.
Multifunction meter - V,I,KWH,PF
3 nos. phase indication LED lampswith 6 Amp backup MCB
Outgoing:
100 Amp 4 pole MCCB=1 No.
10 no. 63 Amp. 4 pole MCB ,C Curve
2 no. 63 Amp. double pole MCB,curve Set 150000 150000
Page 59
MR
Supplying and fixing of the following sheet steel clad wall / recess mounting
telephone tag blocks of krone make constructed from 14 SWG sheet steel
finished with red oxide coating of two coats of paint with hinged gasketted
powder coated door and complete.
a) 05 pairs Set 1000 1000
MR E-7
Supply , fixing testing and commissioning of desert cooler with suitable size ,
body of minimum 20 SWG GI sheet of .8 mm thick with fan GEC motor 30'
and of Honey Comb paper pad (three speed -high ,medium and low , air
delivery 4500 m3/hour) with metallic blade duly painted with anti corrosive
oven cured paint fitted with the body, pump motor duly assembled and
complete in all respect .
Each 14300.00 40 572000
MR E-8
Supply , fixing testing and commissioning of water cooler (ISI )with 150 ltr/
hour cooling capacity , 150 ltr storage capacity with 2 faucets complete in all
respect
Each 65700.00 2 131400
FIRE ALARM SYSTEM
1.21.2 Supplying and fixing of following sizes of PVC conduit along with acessories in
surface/recess including cutting the wall and making good the same in case
of recessed conduit as required.
a) 25mm Meter 62.00 850 52700
(1.17.2)Supplying and drawing of FR PVC insulated copper conductor single core
cable of 2x1.5 sq.mm. in existing conduit as required.Meter 36.00 1000 36000
MR RA
E-13
Supplying, installation, testing and commissioning of inteligent analouge
photoelectric optical type smoke detector and mounting base with LED light
complete as required.
Each 3350.00 50 167500
Page 60
MR RA
E-13
Supplying, installation, testing and commissioning of inteligent analouge
photoelectric optical type heat detector and mounting base with LED light
complete as required.
Each 3350.00 5 16750
MR RA
E-14
Supplying, installation, testing and commissioning of duel tone electronic
hooter suitable for wall mounted complete as required. Nos. 6310.00 5 31550
MR RA
E-15
Supplying, installation, testing and commissioning of manual call box in
suitable enclosure with arrangement to raise the alarm when the glass is
manually broken complete as required.
Nos. 5720.00 5 28600
MR
Supplying, installation, testing and commissioning of microprocessor. based
main fire alarm control panel of 4 zone capacity as complete with batteries,
battery charger illuminated numeric digram complete as required.No. 30500.00 2 61000
88700
For One Block 1727967 1926800
3654767
For 03 barracks = (3654767 x 03 =10964301) 10964301
Total
Total=
Grand Total=
Page 61
S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD I: INTERNAL WIRING
All wiring Item FRLS including provision of conduit, conduit
accsories , circuit wiring, switch, box and all fitting completed
as required.
1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
Conduit, with modular switch,modular plate ,suitable GI Box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
a) Group C 196 Point 718.00 140728.00
2 -1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper condutor single core cable in surface /
recessed PVC conduit 2 way modular switch,modular
plate,suitable GI box and earthing the point with 1.5 sq.mm
.FRLS PVC insulated copper conductor single core cable etc as
required.
6 Point 770.00 4620.00
3 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 1 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
1800 Meter 162.00 291600.00
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
INTERNAL INSTALLATION ELECTRICAL WORK FOR GOS MESS
Page 1
Page 62
4 -1.13 Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 2 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
60 Meter 275.00 16500.00
5 Wiring for circuit/submain wiring alongwith earth wire with the
following sizes of FR PVC insulated copper conductor single core
cable in surface/recessed PVC Conduit as required.
(i) (1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 800 Meter 106.00 84800.00
(ii) (1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire 1000 Meter 131.00 131000.00
(iii) (1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire 120 Meter 162.00 19440.00
(iv) (1.14.4) 2x6 sq.mm + 1x6 sq.mm earth wire 60 Meter 221.00 13260.00
(v) (1.14.10) 4x10 sq.mm + 2x10 sq.mm earth wire. 60 Meter 597.00 35820.00
(vi) (1.14.11) 4x16 sq.mm + 2x16 sq.mm earth wire 80 Meter 883.00 70640.00
5 (1.31) Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess, including providing
and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch ,connection etc as required.
55 Each 276.00 15180.00
6 (1.32) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess including providing and
fixing 6 pin 15/16 and 5/6 amps modular socket outlet with
shulter and 15/16 amps modular switch connection, etc as
required.
29 Each 303.00 8787.00
7 Supplying and fixing of following sizes of medium class PVC
conduit along with acessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required.
Page 2
Page 63
(i) (1.21.2) 25 mm 500 Meter 65.00 32500.00
(ii) (1.21.3) 32 mm 300 Meter 85.00 25500.00
9 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type,
socket outlet with 2 pole and earth metal enclosed plug top
along with 20 amps 'C' Curve, SP, MCB in sheet steel encloser
on surface or in recess with chained metal cover for the socket
outlet and complete with conncections, testing &
commissioning etc as required.
5 Each 868.00 4340.00
S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
10 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type,
socket outlet with 4 pole and earth metal enclosed plug top
along with 30 amps 'C' Curve, TP, MCB in sheet steel encloser
on surface or in recess with chained metal cover for the socket
outlet and complete with conncections, testing &
commissioning etc as required.
2 Each 2473.00 4946.00
11 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box
with mould cord outlet complete with RJ 45 sockets as required
for computer data point. 5 Each 450.00 2250.00
12 (NS) Supplying & laying CAT 6 for LAN wiring in PVC conduit / Cable
Tray complete as required. 100 Each 70.00 7000.00
SUB-HEAD I TOTAL NS: Rs. 9250.00
SUB-HEAD I TOTAL DSR : Rs. 899661.00
Page 3
Page 64
S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD II:- DISTRIBUTION BOARDS
1 (2.8) Supplying and fixing following way prewired TP & N, MCB
distribution board of sheet steel for 415 volts on surface /recess
complete with loose wire box, terminal connectors for all
incoming and outgoing circuits, duly prewired with suitable size
FRLS PVC insulated copper condutor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din bar,
detachable gland plate, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isoltor).
(2.8.5) 4 way (4+12) Double door 1 Each 7357.00 7357.00
(2.8.6) 6 way (4+18) Double door 1 Each 9496.00 9496.00
(2.8.7) 8 way (4+24) Double door 1 Each 10405.00 10405.00
2 (2.7) Supplying and fixing following way, single pole and neutral,
prewired, sheet steel, MCB distribution board, 240 volts, on
surface /recess, complete with loose wire box, terminal blocks,
duly prewired with suitable size FRLS PVC insulated copper
condutor upto terminal blocks, tinned copper bus bar, neutral
link, earth bus, din bar, detachable gland plate,
interconnections, powder painted including earthing etc as
required. (But without MCB/RCCB/Isolator)
(2.7.5) 2+8/10 Way, Double door 4 Each 2508.00 10032.00
4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C'
curve miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with
connections,testing and commisioning etc.as required
(2.10.1) a) Single pole 64 Each 169.00 10816.00
Page 4
Page 65
5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in
the existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.12.1) a) 40 amps 1 Each 218.00 218.00
6 Supply and fixing following rating,four pole,415 volts,MCB in
the existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.13.2) a) 63 amps 3 Each 670.00 2010.00
7 Supply and fixing following rating,double pole (single phase and
neutral),240 volts,RCCB having a sensitivity current upto 300
amp in the existing MCB DB complete with connection ,testing
and commissioning etc. as required.
(2.14.1) a) 25 amps 4 Each 1645.00 6580.00
(2.14.2) a) 40 amps 6 Each 1714.00 10284.00
SUB-HEAD II TOTAL NS: Rs. 0.00
SUB-HEAD II TOTAL DSR : Rs. 59841.00
Page 5
Page 66
S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD III :- WIRING FOR TELEPHONE & TV POINTS
1 Supplying and fixing of following size/modules, GI box along
with modular base & cover plate for modular switches in recess
etc as required.
(1.27.1) a) 75 mm x 75 mm x 60 mm deep 37 Each 166.00 6142.00
2 Supplying and drawing following pair, 0.5.mm dia FR PVC
insulated annealed copper conductor, unarmoured telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required.
a) (1.18.2) 2 Pair 200 Meter 18.00 3600.00
3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor PE insulated, shielded with fine tinned
copper braid and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
100 Meter 28.00 2800.00
4 Supplying and fixing following modular switch/ socket on the
existing modular plate and switch box including connections
but excluding plate etc .as required.
(1.24.6) a) Telephone socket outlet 8 Each 95.00 760.00
(1.24.7) a) TV socket outlet 9 Each 94.00 846.00
5 Supplying and fixing of the following sheet steel clad wall /
recess mounting telephone tag blocks of krone make
constructed from 14 SWG sheet steel finished with red oxide
coating of two coats of paint with hinged gasketted powder
coated door and complete.
Page 6
Page 67
(NS) a) 10 pairs 1 Each 1500.00 1500.00
(NS) b) 20 pairs 1 Each 2500.00 2500.00
SUB-HEAD III TOTAL NS: Rs. 4000.00
SUB-HEAD III TOTAL DSR : Rs. 14148.00
S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD IV:- EARTHING
1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick
including accessories and providing masonary enclosure with
cover plate having locking arrangement and watering pipe of
2.7 mtr long etc. with charoal or coke and salt as required.
2 Set 4490.00 8980.00
2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter
below ground as strip earth electrode , including
connection/terminating with G.I. nut, bolt, spring, washer etc.
as required. 200 Meter 109.00 21800.00
3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe
from earth elecrode including connections with GI nut, bolt,
spring, washer excavation and re-fiiling etc. as required.
75 Meter 421.00 31575.00
SUB-HEAD IV NS TOTAL:- Rs.
SUB-HEAD IV DSR TOTAL:- Rs. 62355.00
Page 7
Page 68
S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD V:- LIGHTING FIXTURE AND FANS & WATER COOLERS
1 (NS) Supplying of following type recessed / surface mounted
fluorescent light fixture complete with electronic choke
earthing point and with TL-5 / CFL lamps complete as required.
(HAVELLS / BAJAJ / WIPRO)
b) 22W LED (4') 42 Each 3100.00 130200.00
2 (NS) Ceiling Light Point for fall ceiling
b) 8W LED 81 Each 2500.00 202500.00
3 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with
louver and bird guard screen with 3 core flexible wire as
required. 12 Each 2800.00 33600.00
4 (NS) Supplying of ceiling fan, complete with blades with suitable
length of down rods shackle insulator earthing point including
connection etc . as required.
a) 1200 mm sweep 37 Each 1400.00 51800.00
5 1.41 Installation, testing and commissioning of pre-wired,
fluorescent fitting / compact fluorescent fitting of all types, with
all accessories and tube etc. directly on ceiling/ wall, including
connection with 1.5 sq. mm FR PVC insulated, copper
conductor, single core cable and earthing etc. as required.
24 Each 91.00 2184.00
6 1.44 Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (upto 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required. 37 Each 95.00 3515.00
Page 8
Page 69
7 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing
opening, including making the hole to suit the size of the abvoe
fan, making good the damage, connection testiing and
commissioning etc as requried 12 Each 204.00 2448.00
8 1.51 Extra for fixing the louvers/ shutters complete with frame for a
exhaust fan of all sizes. 12 Each 90.00 1080.00
9 (1.25) Supplying and fixing stepped type electronic fan regulator on
the existing modular plate switch box including connections but
excluding modular plate etc.as required.
37 Each 284.00 10508.00
10 15.1 Supplying,installing,testing and commissioing of Passive
Infrared (PIR) technology based occupancy sensors having high
performance, non regulating programmable type suitable for
connected load upto 10 amp, for mounting height upto 2.8mtr
and for 5 meter diameter covergae along with necessary fixing
arrnagements i/c programming at site etc. complete as
required. (In toilets only)
Each 3173.00 0.00
11 MR Water Coolers 12 Each 15000.00 180000.00
12 MR AIR Coolers 12 Each 10000.00 120000.00
SUB-HEAD V NS TOTAL:- Rs. 718100.00
SUB-HEAD V DSR TOTAL:- Rs. 19735.00
Page 9
Page 70
S.NO DESCRIPTION DSR 2014 NS
1 SUB-HEAD I: INTERNAL WIRING 899661.00 9250.00
2 SUB-HEAD II:- DISTRIBUTION BOARDS 59841.00 0.00
3 SUB-HEAD III :- WIRING FOR TELEPHONE & TV 14148.00 4000.00
4 SUB-HEAD IV:- EARTHING 62355.00 0.00
5 SUB-HEAD V:- LIGHT FIXTURES & FANS 19735.00 718100.00
1055740.00 731350.00
TOTAL DSR+NS 1787090.00
SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR SOS MESS
NOTE:- PANEL & CABLE HAVE NOT BEEN CONSIDERED IN THIS ESTIMATE
Page 10
Page 71
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD I: INTERNAL WIRING
All wiring Item FRLS including provision of conduit, conduit
accsories , circuit wiring, switch, box and all fitting completed
as required.
1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
Conduit, with modular switch,modular plate ,suitable GI Box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
a) Group C 213 Point 718.00 152934.00
2 -1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper condutor single core cable in surface /
recessed PVC conduit 2 way modular switch,modular
plate,suitable GI box and earthing the point with 1.5 sq.mm
.FRLS PVC insulated copper conductor single core cable etc as
required.
9 Point 770.00 6930.00
3 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 1 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
2500 Meter 162.00 405000.00
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
INTERNAL INSTALLATION ELECTRICAL WORK FOR SOS MESS
Page 1
Page 72
4 -1.13 Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 2 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
80 Meter 275.00 22000.00
5 Wiring for circuit/submain wiring alongwith earth wire with the
following sizes of FR PVC insulated copper conductor single core
cable in surface/recessed PVC Conduit as required.
(i) (1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 900 Meter 106.00 95400.00
(ii) (1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire 1300 Meter 131.00 170300.00
(iii) (1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire 140 Meter 162.00 22680.00
(iv) (1.14.4) 2x6 sq.mm + 1x6 sq.mm earth wire 80 Meter 221.00 17680.00
(v) (1.14.10) 4x10 sq.mm + 2x10 sq.mm earth wire. 80 Meter 597.00 47760.00
(vi) (1.14.11) 4x16 sq.mm + 2x16 sq.mm earth wire 100 Meter 883.00 88300.00
5 (1.31) Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess, including providing
and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch ,connection etc as required.
79 Each 276.00 21804.00
6 (1.32) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess including providing and
fixing 6 pin 15/16 and 5/6 amps modular socket outlet with
shulter and 15/16 amps modular switch connection, etc as
required.
53 Each 303.00 16059.00
7 Supplying and fixing of following sizes of medium class PVC
conduit along with acessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required.
Page 2
Page 73
(i) (1.21.2) 25 mm 600 Meter 65.00 39000.00
(ii) (1.21.3) 32 mm 400 Meter 85.00 34000.00
Page 3
Page 74
9 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type,
socket outlet with 2 pole and earth metal enclosed plug top
along with 20 amps 'C' Curve, SP, MCB in sheet steel encloser
on surface or in recess with chained metal cover for the socket
outlet and complete with conncections, testing &
commissioning etc as required.
10 Each 868.00 8680.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
10 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type,
socket outlet with 4 pole and earth metal enclosed plug top
along with 30 amps 'C' Curve, TP, MCB in sheet steel encloser
on surface or in recess with chained metal cover for the socket
outlet and complete with conncections, testing &
commissioning etc as required.
2 Each 2473.00 4946.00
11 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box
with mould cord outlet complete with RJ 45 sockets as required
for computer data point. 5 Each 450.00 2250.00
12 (NS) Supplying & laying CAT 6 for LAN wiring in PVC conduit / Cable
Tray complete as required. 100 Each 70.00 7000.00
SUB-HEAD I TOTAL NS: Rs. 9250.00
SUB-HEAD I TOTAL DSR : Rs. 1153473.00
Page 4
Page 75
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD II:- DISTRIBUTION BOARDS
1 (2.8) Supplying and fixing following way prewired TP & N, MCB
distribution board of sheet steel for 415 volts on surface /recess
complete with loose wire box, terminal connectors for all
incoming and outgoing circuits, duly prewired with suitable size
FRLS PVC insulated copper condutor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din bar,
detachable gland plate, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isoltor).
(2.8.5) 4 way (4+12) Double door 1 Each 7357.00 7357.00
(2.8.6) 6 way (4+18) Double door 1 Each 9496.00 9496.00
(2.8.7) 8 way (4+24) Double door 1 Each 10405.00 10405.00
2 (2.7) Supplying and fixing following way, single pole and neutral,
prewired, sheet steel, MCB distribution board, 240 volts, on
surface /recess, complete with loose wire box, terminal blocks,
duly prewired with suitable size FRLS PVC insulated copper
condutor upto terminal blocks, tinned copper bus bar, neutral
link, earth bus, din bar, detachable gland plate,
interconnections, powder painted including earthing etc as
required. (But without MCB/RCCB/Isolator)
(2.7.5) 2+8/10 Way, Double door 4 Each 2508.00 10032.00
4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C'
curve miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with
connections,testing and commisioning etc.as required
Page 5
Page 76
(2.10.1) a) Single pole 64 Each 169.00 10816.00
5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in
the existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.12.1) a) 40 amps 1 Each 218.00 218.00
6 Supply and fixing following rating,four pole,415 volts,MCB in
the existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.13.2) a) 63 amps 3 Each 670.00 2010.00
7 Supply and fixing following rating,double pole (single phase and
neutral),240 volts,RCCB having a sensitivity current upto 300
amp in the existing MCB DB complete with connection ,testing
and commissioning etc. as required.
(2.14.1) a) 25 amps 4 Each 1645.00 6580.00
(2.14.2) a) 40 amps 6 Each 1714.00 10284.00
SUB-HEAD II TOTAL NS: Rs. 0.00
SUB-HEAD II TOTAL DSR : Rs. 59841.00
Page 6
Page 77
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD III :- WIRING FOR TELEPHONE & TV POINTS
1 Supplying and fixing of following size/modules, GI box along
with modular base & cover plate for modular switches in recess
etc as required.
(1.27.1) a) 75 mm x 75 mm x 60 mm deep 43 Each 166.00 7138.00
2 Supplying and drawing following pair, 0.5.mm dia FR PVC
insulated annealed copper conductor, unarmoured telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required.
a) (1.18.2) 2 Pair 300 Meter 18.00 5400.00
3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor PE insulated, shielded with fine tinned
copper braid and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
200 Meter 28.00 5600.00
4 Supplying and fixing following modular switch/ socket on the
existing modular plate and switch box including connections
but excluding plate etc .as required.
(1.24.6) a) Telephone socket outlet 17 Each 95.00 1615.00
(1.24.7) a) TV socket outlet 13 Each 94.00 1222.00
5 Supplying and fixing of the following sheet steel clad wall /
recess mounting telephone tag blocks of krone make
constructed from 14 SWG sheet steel finished with red oxide
coating of two coats of paint with hinged gasketted powder
coated door and complete.
(NS) a) 10 pairs 1 Each 1500.00 1500.00
(NS) b) 20 pairs 1 Each 2500.00 2500.00
Page 7
Page 78
SUB-HEAD III TOTAL NS: Rs. 4000.00
SUB-HEAD III TOTAL DSR : Rs. 20975.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD IV:- EARTHING
1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick
including accessories and providing masonary enclosure with
cover plate having locking arrangement and watering pipe of
2.7 mtr long etc. with charoal or coke and salt as required.
2 Set 4490.00 8980.00
2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter
below ground as strip earth electrode , including
connection/terminating with G.I. nut, bolt, spring, washer etc.
as required. 200 Meter 109.00 21800.00
3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe
from earth elecrode including connections with GI nut, bolt,
spring, washer excavation and re-fiiling etc. as required.
75 Meter 421.00 31575.00
SUB-HEAD IV NS TOTAL:- Rs.
SUB-HEAD IV DSR TOTAL:- Rs. 62355.00
Page 8
Page 79
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT
DSR 2014
AMOUNT NS
SUB-HEAD V:- LIGHTING FIXTURE AND FANS & WATER COOLERS
1 (NS) Supplying of following type recessed / surface mounted
fluorescent light fixture complete with electronic choke
earthing point and with TL-5 / CFL lamps complete as required.
(HAVELLS / BAJAJ / WIPRO)
a) 22W LED (4') 45 Each 3100.00 139500.00
b) 18W LED Batton (4') 10 Each 650.00 6500.00
c) 15W LED Downlighter 35 Each 3100.00 108500.00
d) 10W LED Bulkhead 92 Each 1900.00 174800.00
2 (NS) Ceiling Light Point for fall ceiling
b) 8W LED 43 Each 2500.00 107500.00
3 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with
louver and bird guard screen with 3 core flexible wire as
required. 15 Each 2800.00 42000.00
4 (NS) Supplying of ceiling fan, complete with blades with suitable
length of down rods shackle insulator earthing point including
connection etc . as required.
a) 1200 mm sweep 38 Each 1400.00 53200.00
5 1.41 Installation, testing and commissioning of pre-wired,
fluorescent fitting / compact fluorescent fitting of all types, with
all accessories and tube etc. directly on ceiling/ wall, including
connection with 1.5 sq. mm FR PVC insulated, copper
conductor, single core cable and earthing etc. as required.
51 Each 91.00 4641.00
Page 9
Page 80
6 1.44 Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (upto 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required. 38 Each 95.00 3610.00
7 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing
opening, including making the hole to suit the size of the abvoe
fan, making good the damage, connection testiing and
commissioning etc as requried 15 Each 204.00 3060.00
8 1.51 Extra for fixing the louvers/ shutters complete with frame for a
exhaust fan of all sizes. 15 Each 90.00 1350.00
9 (1.25) Supplying and fixing stepped type electronic fan regulator on
the existing modular plate switch box including connections but
excluding modular plate etc.as required.
38 Each 284.00 10792.00
10 15.1 Supplying,installing,testing and commissioing of Passive
Infrared (PIR) technology based occupancy sensors having high
performance, non regulating programmable type suitable for
connected load upto 10 amp, for mounting height upto 2.8mtr
and for 5 meter diameter covergae along with necessary fixing
arrnagements i/c programming at site etc. complete as
required. (In toilets only)
14 Each 3173.00 44422.00
11 MR Water Coolers 2 Each 15000.00 30000.00
SUB-HEAD V NS TOTAL:- Rs. 662000.00
SUB-HEAD V DSR TOTAL:- Rs. 67875.00
Page 10
Page 81
S.NO DESCRIPTION DSR 2014 NS
1 SUB-HEAD I: INTERNAL WIRING 1153473.00 9250.00
2 SUB-HEAD II:- DISTRIBUTION BOARDS 59841.00 0.00
3 SUB-HEAD III :- WIRING FOR TELEPHONE & TV 20975.00 4000.00
4 SUB-HEAD IV:- EARTHING 62355.00 0.00
5 SUB-HEAD V:- LIGHT FIXTURES & FANS 67875.00 662000.00
1364519.00 675250.00
TOTAL DSR+NS 2039769.00
SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR SOS MESS
NOTE:- PANEL & CABLE HAVE NOT BEEN CONSIDERED IN THIS ESTIMATE
Page 11
Page 82
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD I: INTERNAL WIRING
All wiring Item FRLS including provision of conduit, conduit
accsories , circuit wiring, switch, box and all fitting completed
as required. 1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable
in surface / recessed medium class PVC Conduit, with modular
switch,modular plate ,suitable GI Box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable
etc. as required.
a) Group C 225 Point 718.00 161550.00
2 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 1 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
900 Meter 162.00 145800.00
3 -1.13 Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 2 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
100 Meter 275.00 27500.00
4 Wiring for circuit/submain wiring alongwith earth wire with the
following sizes of FR PVC insulated copper conductor single core
cable in surface/recessed PVC Conduit as required.
(i) (1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 1100 Meter 106.00 116600.00
(ii) (1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire 750 Meter 131.00 98250.00
(iii) (1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire 80 Meter 162.00 12960.00
(iv) (1.14.4) 2x6 sq.mm + 1x6 sq.mm earth wire 80 Meter 221.00 17680.00
(v) (1.14.10) 4x10 sq.mm + 2x10 sq.mm earth wire. 80 Meter 597.00 47760.00
(vi) (1.14.11) 4x16 sq.mm + 2x16 sq.mm earth wire 80 Meter 883.00 70640.00
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
SCHEDULE OF QUANTITIES FOR INTERNAL INSTALLATION ELECTRICAL WORK FOR MI HOSPITAL
Page 83
5 (1.31) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and fixing
3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch
,connection etc as required.
61 Each 276.00 16836.00
6 (1.32) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess including providing and fixing
6 pin 15/16 and 5/6 amps modular socket outlet with shulter and
15/16 amps modular switch connection, etc as required.
14 Each 303.00 4242.00
7 Supplying and fixing of following sizes of medium class PVC
conduit along with acessories in surface/recess including cutting the
wall and making good the same in case of recessed conduit as
required.
(i) (1.21.2) 25 mm 400 Meter 65.00 26000.00
(ii) (1.21.3) 32 mm 250 Meter 85.00 21250.00
8 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type, socket
outlet with 2 pole and earth metal enclosed plug top along with 20
amps 'C' Curve, SP, MCB in sheet steel encloser on surface or in
recess with chained metal cover for the socket outlet and complete
with conncections, testing & commissioning etc as required.
5 Each 868.00 4340.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
9 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type, socket
outlet with 4 pole and earth metal enclosed plug top along with 30
amps 'C' Curve, TP, MCB in sheet steel encloser on surface or in
recess with chained metal cover for the socket outlet and complete
with conncections, testing & commissioning etc as required.
2 Each 2473.00 4946.00
10 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box with
mould cord outlet complete with RJ 45 sockets as required for
computer data point. 4 Each 450.00 1800.00
11 (NS) Supplying & laying CAT 6 for LAN wiring in PVC conduit / Cable
Tray complete as required. 300 Each 70.00 21000.00
Page 84
12 (NS) Supplying, fixing and commissioning following nos. ways audio
luminious indicators with rest buttons and buzzers mounted in
concealed GI sheet steel enclosure including interconnection
numbering etc. complete as required.
a 12 WAY 1 Each 9000.00 9000.00
b 4 WAY 1 Each 5500.00 5500.00
SUB-HEAD I TOTAL NS: Rs. 37300.00
SUB-HEAD I TOTAL DSR : Rs. 776354.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD II:- DISTRIBUTION BOARDS
1 (2.8) Supplying and fixing following way prewired TP & N, MCB
distribution board of sheet steel for 415 volts on surface /recess
complete with loose wire box, terminal connectors for all incoming
and outgoing circuits, duly prewired with suitable size FRLS PVC
insulated copper condutor up to terminal blocks, tinned copper bus
bar, neutral link, earth bar, din bar, detachable gland plate,
interconnections, powder painted including earthing etc. as
required. (But without MCB/RCCB/Isoltor).
(2.8.6) 6 way (4+18) Double door 1 Each 9496.00 9496.00
(2.8.7) 8 way (4+24) Double door 1 Each 10405.00 10405.00
2 (2.7) Supplying and fixing following way, single pole and neutral,
prewired, sheet steel, MCB distribution board, 240 volts, on surface
/recess, complete with loose wire box, terminal blocks, duly
prewired with suitable size FRLS PVC insulated copper condutor
upto terminal blocks, tinned copper bus bar, neutral link, earth bus,
din bar, detachable gland plate, interconnections, powder painted
including earthing etc as required. (But without MCB/RCCB/Isolator)
(2.7.4) 4 way (2+4) Double door 2 Each 2508.00 5016.00
Page 85
3 2.9 Supplying and fixing following way prewired vertical type 415 volts
TP&N MCB distribution board surface/recssed of sheet steel dust
protected duly powder painted inclusive of 200amps tinned copper
bsu bar common neutral link earth bar din bar for mounting MCB's
terminal connectors for all incoming and outgoing circuits duly
prewired with FRLS PVC insulated copper conductor upto the
trminal connector/ neutral link earthing etc. as required (But without
MCB/MCCB) (Note: VTPN DB is normally used where 3 phase
outlets are required).
2.9.5 4 way double door 1 Each 7901.00 7901.00
4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C' curve
miniature circuit breaker suitable for inductive load of following
poles in the existing MCB DB complete with connections,testing
and commisioning etc.as required
(2.10.1) a) Single pole 50 Each 169.00 8450.00
(2.10.5) b) Triple pole 11 Each 696.00 7656.00
5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in the
existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.12.1) a) 40 amps 2 Each 218.00 436.00
6 Supply and fixing following rating,four pole,415 volts,MCB in the
existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.13.2) a) 63 amps 2 Each 670.00 1340.00
(2.13.3) b) 100 amps 1 Each 851.00 851.00
7 Supply and fixing following rating,double pole (single phase and
neutral),240 volts,RCCB having a sensitivity current upto 300 amp
in the existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.14.1) a) 25 amps 3 Each 1645.00 4935.00
(2.14.2) a) 40 amps 3 Each 1714.00 5142.00
SUB-HEAD II TOTAL NS: Rs. 0.00
SUB-HEAD II TOTAL DSR : Rs. 61628.00
Page 86
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD III :- WIRING FOR TELEPHONE & TV POINTS
1 Supplying and fixing of following size/modules, GI box along with
modular base & cover plate for modular switches in recess etc as
required.
(1.27.1) a) 75 mm x 75 mm x 60 mm deep 17 Each 166.00 2822.00
2 Supplying and drawing following pair, 0.5.mm dia FR PVC insulated
annealed copper conductor, unarmoured telephone cable in the
existing surface/ recessed steel/ PVC conduit as required.
a) (1.18.2) 2 Pair 200 Meter 18.00 3600.00
3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated, shielded with fine tinned copper
braid and protected with PVC sheath in the existing surface/
recessed steel/ PVC conduit as required.
100 Meter 28.00 2800.00
4 Supplying and fixing following modular switch/ socket on the
existing modular plate and switch box including connections but
excluding plate etc .as required.
(1.24.6) a) Telephone socket outlet 21 Each 95.00 1995.00
(1.24.7) a) TV socket outlet 4 Each 94.00 376.00
5 Supplying and fixing of the following sheet steel clad wall / recess
mounting telephone tag blocks of krone make constructed from 14
SWG sheet steel finished with red oxide coating of two coats of
paint with hinged gasketted powder coated door and complete.
(NS) a) 10 pairs 1 Each 1500.00 1500.00
(NS) b) 20 pairs 1 Each 2500.00 2500.00
SUB-HEAD III TOTAL NS: Rs. 4000.00
SUB-HEAD III TOTAL DSR : Rs. 11593.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
Page 87
SUB-HEAD IV:- EARTHING
1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick
including accessories and providing masonary enclosure with cover
plate having locking arrangement and watering pipe of 2.7 mtr long
etc. with charoal or coke and salt as required. 4 Set 4490.00 17960.00
1 (5.6) Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick
including accessories and providing masonary enclosure with cover
plate having locking arrangement and watering pipe of 2.7 mtr long
etc. with charoal or coke and salt as required. 2 Set 9292.00 18584.00
2 (5.8) Supplying and laying 25 mm x 5 mm Copper strip at 0.50 meter
below ground as strip earth electrode , including
connection/terminating with G.I. nut, bolt, spring, washer etc. as
required. 100 Meter 753.00 75300.00
2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter below
ground as strip earth electrode , including connection/terminating
with G.I. nut, bolt, spring, washer etc. as required.250 Meter 109.00 27250.00
3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe from
earth elecrode including connections with GI nut, bolt, spring,
washer excavation and re-fiiling etc. as required. 100 Meter 421.00 42100.00
SUB-HEAD IV NS TOTAL:- Rs.
SUB-HEAD IV DSR TOTAL:- Rs. 181194.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD V:- LIGHTING FIXTURE AND FANS
1 (NS) Supplying of following type recessed / surface mounted fluorescent light
fixture complete with electronic choke earthing point and with TL-5 / CFL
lamps complete as required. (HAVELLS / BAJAJ / WIPRO)
a) 22W LED (4') 50 Each 3100.00 155000.00
b) 15W LED Downlighter 90 Each 3100.00 279000.00
Page 88
c) 12 W LED (2') 5 Each 2150.00 10750.00
d) 18W LED Batton (4') 20 Each 650.00 13000.00
2 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with louver
and bird guard screen with 3 core flexible wire as required.21 Each 2800.00 58800.00
3 (NS) Supplying of ceiling fan, complete with blades with suitable length
of down rods shackle insulator earthing point including connection
etc . as required.
a) 1200 mm sweep 34 Each 1400.00 47600.00
(NS) Add cost of AC 9 Each 34000.00 306000.00
(NS) Add cost of Desert Cooler 17 Each 14000.00 238000.00
4 1.41 Installation, testing and commissioning of pre-wired, fluorescent
fitting / compact fluorescent fitting of all types, with all accessories
and tube etc. directly on ceiling/ wall, including connection with 1.5
sq. mm FR PVC insulated, copper conductor, single core cable and
earthing etc. as required. 68 Each 91.00 6188.00
5 1.44 Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (upto 30 cm) with 1.5 sq.
mm FRLS PVC insulated, copper conductor, single core cable etc.
as required. 34 Each 95.00 3230.00
6 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing
opening, including making the hole to suit the size of the abvoe fan,
making good the damage, connection testiing and commissioning
etc as requried 21 Each 204.00 4284.00
7 1.51 Extra for fixing the louvers/ shutters complete with frame for a
exhaust fan of all sizes. 21 Each 90.00 1890.00
9 (1.25) Supplying and fixing stepped type electronic fan regulator on the
existing modular plate switch box including connections but
excluding modular plate etc.as required. 34 Each 284.00 9656.00
Page 89
10 15.1 Supplying,installing,testing and commissioing of Passive Infrared
(PIR) technology based occupancy sensors having high
performance, non regulating programmable type suitable for
connected load upto 10 amp, for mounting height upto 2.8mtr and
for 5 meter diameter covergae along with necessary fixing
arrnagements i/c programming at site etc. complete as required. (In
toilets only) 5 Each 3173.00 15865.00
SUB-HEAD V NS TOTAL:- Rs. 1108150.00
SUB-HEAD V DSR TOTAL:- Rs. 41113.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD VI:- FIRE ALARM SYSTEM
1 (1.17.2) Supplying and drawing of FR PVC insulated copper conductor
single core cable of 2x1.5 sq.mm. in existing conduit as required. 750 Meter 36.00 27000.00
2 (NS) Supplying, installation, testing and commissioning of inteligent
analouge photoelectric optical type smoke detector and mounting
base with LED light complete as required. 60 Each 2950.00 177000.00
3 (NS) Supplying, installation, testing and commissioning of inteligent
analouge photoelectric optical type heat detector and mounting
base with LED light complete as required. 3 Each 2400.00 7200.00
Page 90
4 (NS) Supplying, installation, testing and commissioning of duel tone
electronic hooter suitable for wall mounted complete as required.3 Nos. 950.00 2850.00
5 (NS) Supplying, installation, testing and commissioning of manual call
box in suitable enclosure with arrangement to raise the alarm when
the glass is manually broken complete as required.3 Nos. 800.00 2400.00
6 (NS) Supplying, installation, testing and commissioning of
microprocessor based addressable main fire alarm control panel of
2 zone capacity as complete with batteries, battery charger
illuminated numeric digram complete as required. 2 No. 75000.00 150000.00
SUB HEAD VI TOTAL:-NS Rs. 339450.00
SUB HEAD VI TOTAL:-DSR Rs. 27000.00
S.NO DESCRIPTION DSR 2014 NS
1 SUB-HEAD I: INTERNAL WIRING 776354.00 37300.00
2 SUB-HEAD II:- DISTRIBUTION BOARDS 61628.00 0.00
3 SUB-HEAD III :- WIRING FOR TELEPHONE & TV 11593.00 4000.00
4 SUB-HEAD IV:- EARTHING 181194.00 0.00
5 SUB-HEAD V:- LIGHT FIXTURES , FANS ,Desert cooler & Acs 41113.00 1108150.00
6 SUB-HEAD VI:- FIRE ALARM 27000.00 339450.00
1098882.00 1488900.00
TOTAL DSR+NS 2587782.00
7
SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR MI HOSPITAL
NOTE:- PANEL & CABLE HAVE NOT BEEN CONSIDERED IN THIS ESTIMATE
Page 91
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD I: INTERNAL WIRING
All wiring Item FRLS including provision of conduit, conduit accsories , circuit
wiring, switch, box and all fitting completed as required.
1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC Conduit, with modular switch,modular plate
,suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
a) Group C 700 Point 718.00 502600.00
2 -1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
condutor single core cable in surface / recessed PVC conduit 2 way modular
switch,modular plate,suitable GI box and earthing the point with 1.5 sq.mm
.FRLS PVC insulated copper conductor single core cable etc as required.
10 Point 770.00 7700.00
3 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated copper
conductor single core cable in surface /recessed PVC conduit along with 1 No
4 sq.mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
2500 Meter 162.00 405000.00
4 -1.13 Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated copper
conductor single core cable in surface /recessed PVC conduit along with 2 No
4 sq.mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
500 Meter 275.00 137500.00
5 Wiring for circuit/submain wiring alongwith earth wire with the following sizes
of FR PVC insulated copper conductor single core cable in surface/recessed
PVC Conduit as required.
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
BOQ and Estimate of ADMIN BLOCK for internal electrical installation
Page 92
(i) (1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 400 Meter 106.00 42400.00
(ii) (1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire 2200 Meter 131.00 288200.00
(iii) (1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire 120 Meter 162.00 19440.00
(iv) (1.14.4) 2x6 sq.mm + 1x6 sq.mm earth wire 220 Meter 221.00 48620.00
(v) (1.14.10) 4x10 sq.mm + 2x10 sq.mm earth wire. 270 Meter 597.00 161190.00
(vi) (1.14.11) 4x16 sq.mm + 2x16 sq.mm earth wire 160 Meter 883.00 141280.00
5 (1.31) Supplying and fixing suitable size GI box with modular plate and cover in front
on surface or in recess, including providing and fixing 3 pin 5/6 amps modular
socket outlet and 5/6 amps modular switch ,connection etc as required.
216 Each 276.00 59616.00
6 (1.32) Supplying and fixing suitable size GI box with modular plate and cover in front
on surface or in recess including providing and fixing 6 pin 15/16 and 5/6
amps modular socket outlet with shulter and 15/16 amps modular switch
connection, etc as required.
114 Each 303.00 34542.00
7 Supplying and fixing of following sizes of medium class PVC conduit along with
acessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required.
(i) (1.21.2) 25 mm 2000 Meter 65.00 130000.00
(ii) (1.21.3) 32 mm 500 Meter 85.00 42500.00
9 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type, socket outlet with
2 pole and earth metal enclosed plug top along with 20 amps 'C' Curve, SP,
MCB in sheet steel encloser on surface or in recess with chained metal cover
for the socket outlet and complete with conncections, testing &
commissioning etc as required.
25 Each 868.00 21700.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
Page 93
10 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type, socket outlet with
4 pole and earth metal enclosed plug top along with 30 amps 'C' Curve, TP,
MCB in sheet steel encloser on surface or in recess with chained metal cover
for the socket outlet and complete with conncections, testing &
commissioning etc as required.
3 Each 2473.00 7419.00
11 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box with mould
cord outlet complete with RJ 45 sockets as required for computer data point.
50 Each 450.00 22500.00
12 (NS) Supplying & laying CAT 6 for LAN wiring in PVC conduit / Cable Tray complete
as required. 1200 Each 70.00 84000.00
SUB-HEAD I TOTAL NS: Rs. 106500.00
SUB-HEAD I TOTAL DSR : Rs. 2049707.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD II:- DISTRIBUTION BOARDS
1 (2.8) Supplying and fixing following way prewired TP & N, MCB distribution board of
sheet steel for 415 volts on surface /recess complete with loose wire box,
terminal connectors for all incoming and outgoing circuits, duly prewired with
suitable size FRLS PVC insulated copper condutor up to terminal blocks, tinned
copper bus bar, neutral link, earth bar, din bar, detachable gland plate,
interconnections, powder painted including earthing etc. as required. (But
without MCB/RCCB/Isoltor).
(2.8.5) 4 way (4+12) Double door 3 Each 7357.00 22071.00
(2.8.6) 6 way (4+18) Double door 6 Each 9496.00 56976.00
(2.8.7) 8 way (4+24) Double door 4 Each 10405.00 41620.00
Page 94
2 (2.7) Supplying and fixing following way, single pole and neutral, prewired, sheet
steel, MCB distribution board, 240 volts, on surface /recess, complete with
loose wire box, terminal blocks, duly prewired with suitable size FRLS PVC
insulated copper condutor upto terminal blocks, tinned copper bus bar,
neutral link, earth bus, din bar, detachable gland plate, interconnections,
powder painted including earthing etc as required. (But without
MCB/RCCB/Isolator)
(2.7.5) 2 + 8/10 way, Double door 5 Each 2995.00 14975.00
3 2.9 Supplying and fixing following way prewired vertical type 415 volts TP&N MCB
distribution board surface/recssed of sheet steel dust protected duly powder
painted inclusive of 200amps tinned copper bsu bar common neutral link
earth bar din bar for mounting MCB's terminal connectors for all incoming and
outgoing circuits duly prewired with FRLS PVC insulated copper conductor
upto the trminal connector/ neutral link earthing etc. as required (But without
MCB/MCCB) (Note: VTPN DB is normally used where 3 phase outlets are
required).
2.9.5 4 way double door 2 Each 7901.00 15802.00
4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C' curve miniature
circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections,testing and commisioning etc.as required
(2.10.1) a) Single pole 200 Each 169.00 33800.00
(2.10.5) b) Triple pole 49 Each 696.00 34104.00
5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in the existing
MCB DB complete with connection ,testing and commissioning etc. as
required.
(2.12.1) a) 40 amps 5 Each 218.00 1090.00
6 Supply and fixing following rating,four pole,415 volts,MCB in the existing MCB
DB complete with connection ,testing and commissioning etc. as required.
(2.13.2) a) 63 amps 10 Each 670.00 6700.00
(2.13.3) b) 100 amps 5 Each 851.00 4255.00
Page 95
7 Supply and fixing following rating,double pole (single phase and neutral),240
volts,RCCB having a sensitivity current upto 300 amp in the existing MCB DB
complete with connection ,testing and commissioning etc. as required.
(2.14.1) a) 25 amps 8 Each 1645.00 13160.00
(2.14.2) a) 40 amps 25 Each 1714.00 42850.00
SUB-HEAD II TOTAL NS: Rs. 0.00
SUB-HEAD II TOTAL DSR : Rs. 287403.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD III :- WIRING FOR TELEPHONE & TV POINTS
1 Supplying and fixing of following size/modules, GI box along with modular
base & cover plate for modular switches in recess etc as required.
(1.27.1) a) 75 mm x 75 mm x 60 mm deep 75 Each 166.00 12450.00
2 Supplying and drawing following pair, 0.5.mm dia FR PVC insulated annealed
copper conductor, unarmoured telephone cable in the existing surface/
recessed steel/ PVC conduit as required.
a) (1.18.2) 2 Pair 750 Meter 18.00 13500.00
3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
required.
150 Meter 28.00 4200.00
4 Supplying and fixing following modular switch/ socket on the existing modular
plate and switch box including connections but excluding plate etc .as
required.
(1.24.6) a) Telephone socket outlet 74 Each 95.00 7030.00
(1.24.7) a) TV socket outlet 4 Each 94.00 376.00
Page 96
5 Supplying and fixing of the following sheet steel clad wall / recess mounting
telephone tag blocks of krone make constructed from 14 SWG sheet steel
finished with red oxide coating of two coats of paint with hinged gasketted
powder coated door and complete.
(NS) a) 10 pairs 5 Each 1500.00 7500.00
(NS) b) 20 pairs 5 Each 2500.00 12500.00
(NS) c) 50 pairs 3 Each 5000.00 15000.00
SUB-HEAD III TOTAL NS: Rs. 35000.00
SUB-HEAD III TOTAL DSR : Rs. 37556.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD IV:- EARTHING
1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick including
accessories and providing masonary enclosure with cover plate having locking
arrangement and watering pipe of 2.7 mtr long etc. with charoal or coke and
salt as required. 4 Set 4490.00 17960.00
1 (5.6) Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick including
accessories and providing masonary enclosure with cover plate having locking
arrangement and watering pipe of 2.7 mtr long etc. with charoal or coke and
salt as required. 2 Set 9292.00 18584.00
2 (5.8) Supplying and laying 25 mm x 5 mm Copper strip at 0.50 meter below ground
as strip earth electrode , including connection/terminating with G.I. nut, bolt,
spring, washer etc. as required.
200 Meter 753.00 150600.00
2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter below ground as
strip earth electrode , including connection/terminating with G.I. nut, bolt,
spring, washer etc. as required. 400 Meter 109.00 43600.00
3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe from earth
elecrode including connections with GI nut, bolt, spring, washer excavation
and re-fiiling etc. as required. 150 Meter 421.00 63150.00
Page 97
SUB-HEAD IV NS TOTAL:- Rs.
SUB-HEAD IV DSR TOTAL:- Rs. 293894.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD V:- LIGHTING FIXTURE AND FANS
1 (NS) Supplying of following type recessed / surface mounted fluorescent light
fixture complete with electronic choke earthing point and with TL-5 / CFL
lamps complete as required. (HAVELLS / BAJAJ / WIPRO)
a) 22W LED (4') 270 Each 3100.00 837000.00
b) 15W CFL Downlighter 200 Each 3100.00 620000.00
c) 18W LED (2') 15 Each 2150.00 32250.00
d) 10W LED bulkhead 10 Each 1900.00 19000.00
2 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with louver and bird
guard screen with 3 core flexible wire as required. 21 Each 2800.00 58800.00
3 (NS) Supplying of ceiling fan, complete with blades with suitable length of down
rods shackle insulator earthing point including connection etc . as required.
a) 1200 mm sweep 117 Each 1400.00 163800.00
(NS) AC 4 Each 39000.00 156000.00
(NS) Desert Cooler 73 Each 14000.00 1022000.00
4 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting /
compact fluorescent fitting of all types, with all accessories and tube etc.
directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC
insulated, copper conductor, single core cable and earthing etc. as required.
495 Each 91.00 45045.00
Page 98
5 1.44 Installation, testing and commissioning of ceiling fan, including wiring the
down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable etc. as required.
117 Each 95.00 11115.00
6 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing opening,
including making the hole to suit the size of the abvoe fan, making good the
damage, connection testiing and commissioning etc as requried
21 Each 204.00 4284.00
7 1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of
all sizes. 21 Each 90.00 1890.00
9 (1.25) Supplying and fixing stepped type electronic fan regulator on the existing
modular plate switch box including connections but excluding modular plate
etc.as required. 117 Each 284.00 33228.00
10 15.1 Supplying,installing,testing and commissioing of Passive Infrared (PIR)
technology based occupancy sensors having high performance, non regulating
programmable type suitable for connected load upto 10 amp, for mounting
height upto 2.8mtr and for 5 meter diameter covergae along with necessary
fixing arrnagements i/c programming at site etc. complete as required. (In
toilets only)
15 Each 3173.00 47595.00
SUB-HEAD V NS TOTAL:- Rs. 2908850.00
SUB-HEAD V DSR TOTAL:- Rs. 143157.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD VI:- FIRE ALARM SYSTEM
1 (1.17.2) Supplying and drawing of FR PVC insulated copper conductor single core cable
of 2x1.5 sq.mm. in existing conduit as required. 2000 Meter 36.00 72000.00
Page 99
2 (NS) Supplying, installation, testing and commissioning of inteligent analouge
photoelectric optical type smoke detector and mounting base with LED light
complete as required. 180 Each 2950.00 531000.00
3 (NS) Supplying, installation, testing and commissioning of inteligent analouge
photoelectric optical type heat detector and mounting base with LED light
complete as required. 10 Each 2400.00 24000.00
4 (NS) Supplying, installation, testing and commissioning of duel tone electronic
hooter suitable for wall mounted complete as required. 15 Nos. 950.00 14250.00
5 (NS) Supplying, installation, testing and commissioning of manual call box in
suitable enclosure with arrangement to raise the alarm when the glass is
manually broken complete as required. 15 Nos. 800.00 12000.00
6 (NS) Supplying, installation, testing and commissioning of microprocessor based
addressable main fire alarm control panel of 4 zone capacity as complete with
batteries, battery charger illuminated numeric digram complete as required.
5 No. 125000.00 625000.00
SUB HEAD VI TOTAL:-NS Rs. 1206250.00
SUB HEAD VI TOTAL:-DSR Rs. 72000.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD VII:- LIGHTING CONDUCTOR
1 (6.1)Providing and fixing of lighting conductor finial, made of 25mm dia 300 mm
long, copper tube, having single prong at top , with 85mm dia 3 mm thick
copper base plate including holes etc. complete as required.2 Each 764.00 1528.00
2 (6.4) Jointing copper / G.I tape (with another copper / G.I tape, base of the finial or
any other metallic object) by riveting / nut bolting/ sweating and soldering etc
as required. 2 Each 72.00 144.00
Page 100
3 (6.7) Providing and fixing G.I tape 20 mm X 3 mm on parapet or surface of wall for
lighting conductor compete as required.(for horizontal run). 600 Meter 68.00 40800.00
4 (6.10) Providing and fixing G.I tape 20 mm X 3 mm on parapet or surface of wall for
lighting conductor compete as required.(for vertical run). 300 Meter 72.00 21600.00
5 (6.12) Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125
mm long. With 4 nos of tinned brass bolts, nuts, check nuts and spring
washers etc. complete as required. 5 Each 71.00 355.00
6 (6.14) Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in
ground as required. 250 Meter 141.00 35250.00
SUB HEAD VI TOTAL:-NS Rs.
SUB HEAD VI TOTAL:-DSR Rs. 99677.00
Page 101
S.NO DESCRIPTION DSR 2014 NS
1 SUB-HEAD I: INTERNAL WIRING 2049707.00 106500.00
2 SUB-HEAD II:- DISTRIBUTION BOARDS 287403.00 0.00
3 SUB-HEAD III :- WIRING FOR TELEPHONE & TV 37556.00 35000.00
4 SUB-HEAD IV:- EARTHING 293894.00 0.00
5 SUB-HEAD V:- LIGHT FIXTURES & FANA 143157.00 2908850.00
6 SUB-HEAD VI:- FIRE ALARM 72000.00 1206250.00
7 SUB-HEAD VII:- LIGHTNING CONDUCTOR 99677.00 0.00
2983394.00 4256600.00
TOTAL DSR+NS 7239994.00
SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR ADMIN. BLOCK
NOTE:- PANEL & CABLE HAVE NOT BEEN CONSIDERED IN THIS ESTIMATE
Page 102
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD I: INTERNAL WIRING
All wiring Item FRLS including provision of conduit, conduit
accsories , circuit wiring, switch, box and all fitting completed
as required.
1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
Conduit, with modular switch,modular plate ,suitable GI Box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
a) Group C 24 Point 718.00 17232.00
2 -1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper condutor single core cable in surface /
recessed PVC conduit 2 way modular switch,modular
plate,suitable GI box and earthing the point with 1.5 sq.mm
.FRLS PVC insulated copper conductor single core cable etc as
required.
2 Point 770.00 1540.00
3 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 1 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
160 Meter 162.00 25920.00
4 -1.13 Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /recessed PVC
conduit along with 2 No 4 sq.mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
5 Meter 275.00 1375.00
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
INTERNAL INSTALLATION ELECTRICAL WORK FOR BIIN TYPE MAGAZINE
Page 1
Page 103
5 Wiring for circuit/submain wiring alongwith earth wire with the
following sizes of FR PVC insulated copper conductor single core
cable in surface/recessed PVC Conduit as required.
(i) (1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 80 Meter 106.00 8480.00
(ii) (1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire 120 Meter 131.00 15720.00
(iii) (1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire 10 Meter 162.00 1620.00
(iv) (1.14.4) 2x6 sq.mm + 1x6 sq.mm earth wire 15 Meter 221.00 3315.00
(v) (1.14.10) 4x10 sq.mm + 2x10 sq.mm earth wire. 15 Meter 597.00 8955.00
(vi) (1.14.11) 4x16 sq.mm + 2x16 sq.mm earth wire 20 Meter 883.00 17660.00
5 (1.31) Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch ,connection etc as required.
8 Each 276.00 2208.00
6 Supplying and fixing of following sizes of medium class PVC
conduit along with acessories in surface/recess including cutting
the wall and making good the same in case of recessed conduit
as required.
(i) (1.21.2) 25 mm 45 Meter 65.00 2925.00
(ii) (1.21.3) 32 mm 35 Meter 85.00 2975.00
SUB-HEAD I TOTAL DSR : Rs. 109925.00
Page 2
Page 104
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD II:- DISTRIBUTION BOARDS
1 (2.8) Supplying and fixing following way prewired TP & N, MCB
distribution board of sheet steel for 415 volts on surface /recess
complete with loose wire box, terminal connectors for all
incoming and outgoing circuits, duly prewired with suitable size
FRLS PVC insulated copper condutor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din bar,
detachable gland plate, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isoltor).
(2.8.5) 4 way (4+12) Double door 1 Each 7357.00 7357.00
(2.8.6) 6 way (4+18) Double door 1 Each 9496.00 9496.00
2 (2.7) Supplying and fixing following way, single pole and neutral,
prewired, sheet steel, MCB distribution board, 240 volts, on
surface /recess, complete with loose wire box, terminal blocks,
duly prewired with suitable size FRLS PVC insulated copper
condutor upto terminal blocks, tinned copper bus bar, neutral
link, earth bus, din bar, detachable gland plate,
interconnections, powder painted including earthing etc as
required. (But without MCB/RCCB/Isolator)
(2.7.5) 2+8/10 Way, Double door 1 Each 2508.00 2508.00
4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C'
curve miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with
connections,testing and commisioning etc.as required
(2.10.1) a) Single pole 8 Each 169.00 1352.00
Page 3
Page 105
5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in
the existing MCB DB complete with connection ,testing and
commissioning etc. as required.
(2.12.1) a) 40 amps 1 Each 218.00 218.00
7 Supply and fixing following rating,double pole (single phase and
neutral),240 volts,RCCB having a sensitivity current upto 300
amp in the existing MCB DB complete with connection ,testing
and commissioning etc. as required.
(2.14.1) a) 25 amps 2 Each 1645.00 3290.00
SUB-HEAD II TOTAL NS: Rs.
SUB-HEAD II TOTAL DSR : Rs. 24221.00
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD IV:- EARTHING
1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick
including accessories and providing masonary enclosure with
cover plate having locking arrangement and watering pipe of
2.7 mtr long etc. with charoal or coke and salt as required.1 Set 4490.00 4490.00
2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter
below ground as strip earth electrode , including
connection/terminating with G.I. nut, bolt, spring, washer etc.
as required. 30 Meter 109.00 3270.00
3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe
from earth elecrode including connections with GI nut, bolt,
spring, washer excavation and re-fiiling etc. as required.20 Meter 421.00 8420.00
SUB-HEAD IV NS TOTAL:- Rs.
SUB-HEAD IV DSR TOTAL:- Rs. 16180.00
Page 4
Page 106
S.NO DSR ITEM
NO.
DESCRIPTION QTY UNIT RATE AMOUNT DSR
2014
AMOUNT NS
SUB-HEAD V:- LIGHTING FIXTURE AND FANS & WATER COOLERS
1 (NS) Supplying of following type recessed / surface mounted
fluorescent light fixture complete with electronic choke earthing
point and with TL-5 / CFL lamps complete as required. (HAVELLS
/ BAJAJ / WIPRO)
b) 22W LED (4') 8 Each 3100.00 24800.00
2 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with
louver and bird guard screen with 3 core flexible wire as
required. 2 Each 2800.00 5600.00
3 (NS) Supplying of ceiling fan, complete with blades with suitable
length of down rods shackle insulator earthing point including
connection etc . as required.
a) 1200 mm sweep 2 Each 1400.00 2800.00
4 1.41 Installation, testing and commissioning of pre-wired,
fluorescent fitting / compact fluorescent fitting of all types, with
all accessories and tube etc. directly on ceiling/ wall, including
connection with 1.5 sq. mm FR PVC insulated, copper
conductor, single core cable and earthing etc. as required.12 Each 91.00 1092.00
5 1.44 Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (upto 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required. 2 Each 95.00 190.00
Page 5
Page 107
6 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing
opening, including making the hole to suit the size of the abvoe
fan, making good the damage, connection testiing and
commissioning etc as requried2 Each 204.00 408.00
7 1.51 Extra for fixing the louvers/ shutters complete with frame for a
exhaust fan of all sizes. 2 Each 90.00 180.00
9 (1.25) Supplying and fixing stepped type electronic fan regulator on
the existing modular plate switch box including connections but
excluding modular plate etc.as required.2 Each 284.00 568.00
SUB-HEAD V NS TOTAL:- Rs. 33200.00
SUB-HEAD V DSR TOTAL:- Rs. 2438.00
SUB-HEAD VI:- FIRE ALARM SYSTEM
1 (1.17.2) Supplying and drawing of FR PVC insulated copper conductor
single core cable of 2x1.5 sq.mm. in existing conduit as
required. 500 Meter 36.00 18000.00
2 (NS) Supplying, installation, testing and commissioning of inteligent
analouge photoelectric optical type smoke detector and
mounting base with LED light complete as required.50 Each 2950.00 147500.00
3 (NS) Supplying, installation, testing and commissioning of inteligent
analouge photoelectric optical type heat detector and
mounting base with LED light complete as required.4 Each 2400.00 9600.00
4 (NS) Supplying, installation, testing and commissioning of duel tone
electronic hooter suitable for wall mounted complete as
required. 4 Nos. 950.00 3800.00
Page 6
Page 108
5 (NS) Supplying, installation, testing and commissioning of manual call
box in suitable enclosure with arrangement to raise the alarm
when the glass is manually broken complete as required.4 Nos. 800.00 3200.00
6 (NS) Supplying, installation, testing and commissioning of
microprocessor based addressable main fire alarm control
panel of 4 zone capacity as complete with batteries, battery
charger illuminated numeric digram complete as required.1 No. 125000.00 125000.00
SUB HEAD VI TOTAL:-NS Rs. 289100.00
SUB HEAD VI TOTAL:-DSR Rs. 18000.00
S.NO DESCRIPTION DSR 2014 NS
1 SUB-HEAD I: INTERNAL WIRING 109925.00 0.00
2 SUB-HEAD II:- DISTRIBUTION BOARDS 24221.00 0.00
3 SUB-HEAD IV:- EARTHING 16180.00 0.00
4 SUB-HEAD V:- LIGHT FIXTURES & FANS 2438.00 33200.00
4 SUB-HEAD VI:- FIRE ALARM SYSTEM 18000.00 289100.00
170764.00 322300.00
TOTAL DSR+NS 493064.00
SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR SOS MESS
NOTE:- PANEL & CABLE HAVE NOT BEEN CONSIDERED IN THIS ESTIMATE
Page 7
Page 109
DSR
Item
no.
Description Unit Rate (in Rs.) GF FF SF TF Total Total Amount Total Amount
DSR N.DSR
1.10
Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI
box and earthing the point with 1.5 sq.mm. FR
PVC insulated copper conductor single core cable
etc as required.
1.10.1 Group A Point
518.00 352 1,82,336.00
Light
point
#REF! #REF! #REF!
0.00
0.00
0.00
0.00
585.00 66 66 66 66 264 1,54,440.00
0.00
585.00 94 54,990.00
585.00 25 14,625.00
Fan point 0.00
#REF! #REF! #REF!
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - II) ANNEX-4B :Estimate for providing internal Electrical installation in barracks to be constructed in ITBP Chittur (AP)
1.10.2 Group B Point
Page 1 of 10
Page 110
585.00 16 16 16 16 64 37,440.00
0.00
585.00 24 14,040.00
585.00 7 4,095.00
exhaust
point
#REF! #REF! #REF!
0.00
585.00 16 9,360.00
585.00 4 2,340.00
585.00 12 12 12 12 48 28,080.00
0.00
585.00 16 9,360.00
585.00 4 2,340.00
(1.10.3)
1.11
Wiring for twin control light point with 1.5 sq.mm
FR PVC insulated copper conductor single core
cable in surface / recessed medium class PVC
conduit, 2 way modular switch, modular plate,
suitable GI box and earthing the point with 1.5
sq.mm. FR PVC insulated copper conductor single
core cable etc as required.
Point 770.00 8.00 8.00 8.00 8.00 32 24,640.00
1.10.2 Group B Point
Page 2 of 10
Page 111
1.14
Wiring for circuit/ submain wiring alongwith earth
wire with the following sizes of FRLS PVC
insulated copper conductor, single core cable in
surface/ recessed medium class PVC conduit as
required1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 221.00 50 50 11,050.00
1.14.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 597 30.00 40.00 50.00 60.00 180 1,07,460.00
1.17 Supplying and drawing following sizes of FR PVC
insulated copper conductor, single core cable in
the existing surface/ recessed steel/ PVC conduit
as required.1.17.2 2 x 1.5 sq. mm Metre 36.00 110.00 110.00 110.00 110.00 440 15,840.00
1.17.3 3 x 1.5 sq. mm Metre 50.00 60.00 60.00 60.00 60.00 240 12,000.00
1.17.11 3 x 2.5 sq. mm Metre 75.00 160.00 160.00 160.00 160.00 640 48,000.00
1.17.21 3 x 4 sq. mm Metre 109.00 310.00 310.00 310.00 310.00 1240 1,35,160.00
1.18 Supplying and drawing following pair 0.5 sq mm
FR PVC insulated annealed copper conductor,
unarmored telephone cable in the existing
surface/ recessed steel/ PVC conduit as required.
1.18.2 2 Pair Metre 18.00 60.00 20.00 20.00 20.00 120 2,160.00
1.19
Supplying and drawing co-axial TV cable RG-6
grade, 0.7 mm solid copper conductor PE
insulated, shielded with fine tinned copper braid
and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required.
Mtr. 28 120.00 100.00 100.00 100.00 420 11,760.00
1.21
Supplying and fixing of following sizes of medium
class PVC conduit along with accessories in
surface/recess including cutting the wall and
making good the same in case of recessed conduit
as required.
1.21.1 20 mm Mtr. 53 100.00 100.00 100.00 100.00 400 21,200.00
1.21.2 25 mm Mtr. 65 300.00 300.00 300.00 300.00 1200 78,000.00
1.21.3 32 mm Metre 85.00 50.00 50.00 50.00 50.00 200 17,000.00
1.24 Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
including connections but excluding modular plate
etc. as required.
Page 3 of 10
Page 112
1.24.6 Telephone socket outlet Each 95.00 4 4 4 4 16 1,520.00
1.24.7 TV antenna socket outlet Each 94.00 12.00 12.00 12.00 12.00 48 4,512.00
1.25
Supplying and fixing stepped type electronic fan
regulator on the existing modular plate switch box
including connections but excluding modular plate
etc. as required.
Each 284.00 16 16 16 16 64 18,176.00
1.26
Supplying and fixing modular blanking plate on
the existing modular plate & switch box excluding
modular plate as required.
Each 23.00 29.00 29.00 29.00 29.00 116 2,668.00
1.27 Supplying and fixing following size/ modules, GI
box alongwith modular base & cover plate for
modular switches in recess etc as required.
1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 4.00 4.00 4.00 4.00 16 2,656.00
1.31
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6
amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For
light plugs to be used in non residential buildings).
Each 303.00 44.00 44.00 44.00 44.00 176 53,328.00
1.32
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface or in
recess, including providing and fixing 6 pin 5/6 &
15/16 amps modular socket outlet and 15/16
amps modular switch, connection etc. as
required.
Each 395.00 36.00 36.00 36.00 36.00 144 56,880.00
1.34Supplying and fixing brass batten/ angle holder
including connection etc. as required.Each 74.00 50 50 50 50 200 14,800.00
1.38 Supplying and fixing call bell/ buzzer suitable for
single phase, 230 volts, complete as required.
Each 61 4 4 4 4 16 976.00
Page 4 of 10
Page 113
1.41
Installation, testing and commissioning of pre-
wired, fluorescent fitting / compact fluorescent
fitting/ LED of all types, complete with all
accessories and tube etc. directly on ceiling/ wall,
including connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable and
earthing etc. as required
Each 91 16 16 16 16 64 5,824.00
1.45
Installation, testing and commissioning of ceiling
fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable,
including providing and fixing phenolic laminated
sheet cover on the fan box etc. as required.
Each 122 16.00 16.00 16.00 16.00 64 7,808.00
1.50Installation of exhaust fan in the existing opening,
including making good the damage, connection,
testing, commissioning etc. as required.
1.50.1 Upto 450 mm sweep Each 204 12.00 12 12 12 48 9,792.00
1.51Extra for fixing the louvers/ shutters complete
with frame for a exhaust fan of all sizes.Each 90.00 12.00 12 12 12 48 4,320.00
2.7 Supplying and fixing following way prewired SP&N
MCB distribution board of steel sheet for 240
volts on surface/ recess complete with loose wire
box, terminal connectors for all incoming and
outgoing circuits, duly prewired with suitable size
FR PVC insulated copper conductor up to terminal
blocks, tinned copper bus bar, neutral link, earth
bar, din bar, detachable gland plate,
interconnections, powder painted including
earthing etc. as required. (But without MCB/
RCCB/ Isolator)
2.7.5 2 + 8 way, Double door Each 2995.00 4.00 4 11,980.00
Page 5 of 10
Page 114
2.8 Supplying and fixing following way prewired TP&N
MCB distribution board of steel sheet for 415
volts on surface/ recess complete with loose wire
box, terminal connectors for all incoming and
outgoing circuits, duly prewired with suitable size
FR PVC insulated copper conductor up to terminal
blocks, tinned copper bus bar, neutral link, earth
bar, din bar, detachable gland plate,
interconnections, powder painted including
earthing etc. as required.(But without MCB/
RCCB/ Isolator)
2.8.7 8 way (4 + 24), Double door Each 10405 4 4.00 4.00 4.00 16 1,66,480.00
2.8.8 12 way (4 + 36), Double door Each 12782 4.00 4.00 4.00 4.00 16 2,04,512.00
2.10
Supplying and fixing 5 amps to 32 amps rating,
240/415 volts, "C" curve, miniature circuit breaker
suitable for inductive load of following poles in
the existing MCB DB complete with connections,
testing and commissioning etc. as required
2.10.1 Single pole Each 169 80.00 80.00 80.00 80.00 320 54,080.00
2.12 Supplying and fixing following rating, double pole,
240 volts, isolator in the existing MCB DB
complete with connections, testing and
commissioning etc. as required.
2.12.1 40 amps Each 218 4.00 4 872.00
2.13
Supplying and fixing following rating, four pole,
415 volts, isolator MCB in the existing MCB DB
complete with connections, testing and
commissioning etc. as required.2.13.2 63 amps Each 670 4.00 4.00 4.00 4.00 16 10,720.00
2.14
Supplying and fixing following rating, double pole,
(single phase and neutral), 240 volts, residual
current circuit breaker (RCCB), having a sensitivity
current upto 300 milliamperes in the existing MCB
DB complete with connections, testing and
commissioning etc. as required
2.14.3 63 amps Each 2237 4.00 4.00 4.00 4.00 16 35,792.00
Page 6 of 10
Page 115
2.18
Supplying and fixing 20 amps, 240 volts, SPN
industrial type, socket outlet, with 2 pole and
earth, metal enclosed plug top alongwith 20 amps
"C" curve, SP, MCB, in sheet steel enclosure, on
surface or in recess, with chained metal cover for
the socket out let and complete with connections,
testing and commissioning etc. as required.
Each 954 4.00 4 3,816.00
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X
6 mm thick including accessories, and providing
masonry enclosure with cover plate having
locking arrangement and watering pipe of 2.7
metre long etc. with charcoal/ coke and salt as
required.
Set 4490 4.00 4 17,960.00
5.9
Supplying and laying 25 mm X 5 mm G.I strip at
0.50 metre below ground as strip earth electrode,
including connection/ terminating with G.I. nut,
bolt, spring, washer etc. as required. (Jointing
shall be done by overlapping and with 2 sets of
G.I. nut bolt & spring washer spaced at 50mm)
Metre 109.00 30.00 30 3,270.00
5.11
Providing and fixing 25 mm X 5 mm G.I. strip in 40
mm dia G.I. pipe from earth electrode including
connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required.
Metre 421.00 50.00 50 21,050.00
6.2
Providing and fixing of lightning conductor finial,
made of 25 mm dia 300 mm long, G.I. tube,
having single prong at top, with 85 mm dia 6 mm
thick G.I. base plate including holes etc. complete
as required.
Each 369.00 2.00 2 738.00
6.7
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or surface of wall for lightning
conductor complete as required.(For horizontal
run)
Metre 68.00 120.00 120 8,160.00
6.8
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or surface of wall for lightning
conductor complete as required.(For vertical run)
Metre 98.00 40.00 40 3,920.00
Page 7 of 10
Page 116
6.12 Providing and fixing testing joint made of 20mm x
3mm thick GI strip, 125mm long with 4 Nos. GI
bolts,nuts,chuck nuts and spring washers etc.
complete as required. (6.12)
Nos. 71.00 4.00 4 284.00
6.14 Providing and laying GI tape 32mm x 6mm from
earth electrode directly in ground as required.
(6.14)
Mtr. 141 50 50 7,050.00
7.1 Laying of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of
following size direct in ground including
excavation, sand cushioning, protective covering
and refilling the trench etc as required.
7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 202 150 0 0 0 150 30,300.00
MR E-
12
Supply of 3.5 cx95 sq. Mm Aluminium Arm cable ,
1.1 kv grade XLPE insulated Metre600 150 0 0 0 150 90,000.00
MR-RA
E-1,2,2^
Supplying of following type recessed / surface
mounted fluorescent light fixture complete with
electronic choke earthing point and with TL-5 /
CFL lamps complete as required.
Supply of lighting CFL bulbs 18 watt. Each 223 50 50 50 50 200 44,600.00
Supply of 1X 36 watt tube light. Each 1200 16 16 16 16 64 76,800.00
MR E-4
Supplying of ceiling fan, complete with blades
with suitable length of down rods shackle
insulator earthing point including connection etc .
as required.-(1200 SWEEP)
Each 1600.00 16 16 16 16 64 1,02,400.00
MR E-6
Supply of exhaust fan with 250 mm sweep with
rust proof body and noice less operation
complete with louvers.
Each 1525.00 12 12 12 12 48 73,200.00
Page 8 of 10
Page 117
MR E-7
Supply , fixing testing and commissioning of
desert cooler with suitable size , body of
minimum 20 SWG GI sheet of .8 mm thick with
fan GEC motor 30' and of Honey Comb paper pad
(three speed -high ,medium and low , air delivery
4500 m3/hour) with metallic blade duly painted
with anti corrosive oven cured paint fitted with
the body, pump motor duly assembled and
complete in all respect .
Each 14300.00 16 16 16 16 64 9,15,200.00
MR E-
11
Supplying ,installation ,testing and
commissioning of cubical type LT panel
suitable for 415 V, 3 phase 4 wire 50 Hz AC
supply , fabricated in compartmentalized
design from CRCA sheet of 2 mm thickfor
frame work and covers , 3 mm thick for gland
plates i/c cleaning and finishing complete
with 7 tank process for powder coating in
approved shade having 200 Amp. capacity
extentible type TPN aluminium alloy bus-bars
of high conductivity ,DMC/SMC bus bar
support with short circuit withstand capacity
of 31 MVA for 1 sec. ,bottom base channel of
MS section not less than 100mmx50mmx5
mm thick fabrication shall be done in
transportable section ,intire panel shall have
a comman copper earth busbar of size
25mmx5 mm at the rear with 2 no. earth
stud,solid connections from main bus bar to
switch gears with required size of AL. bus
bars and control wiring .
Incoming:
160 Amp TP +N MCCB,35 KA (Ics=Icu upto 433 V)
CT of ratio 160/5 Amps = 3 no.
Page 9 of 10
Page 118
Multifunction meter - V,I,KWH,PF
3 nos. phase indication LED lampswith 6 Amp
backup MCB
Outgoing:
100 Amp 4 pole MCCB=1 No.
10 no. 63 Amp. 4 pole MCB ,C Curve
2 no. 63 Amp. double pole MCB,curve Set 150000 1 1,50,000.00
MR
Supplying and fixing of the following sheet steel
clad wall / recess mounting telephone tag blocks
of krone make constructed from 14 SWG sheet
steel finished with red oxide coating of two coats
of paint with hinged gasketted powder coated
door and complete.
a) 05 pairs Set 1000 1 1,000.00
For One Block 0.00 14,53,200.00
14,53,200.00
For 5 Blocks of Type II QTRS 72,66,000.00
Total=
Grand Total=
Page 10 of 10
Page 119
DSR N.DSR
1.10
Wiring for light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FR PVC insulated copper conductor single core
cable in surface / recessed medium class PVC conduit, with
modular switch, modular plate, suitable GI box and earthing the
point with 1.5 sq.mm. FR PVC insulated copper conductor single
core cable etc as required.
Light point 94 585 54990
Fan point 24 585 14040
exhaust
point16 585 9360
call bell
point4 585 2340
1.11
Wiring for twin control light point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, 2 way modular switch,
modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FR PVC insulated copper conductor single core cable etc
as required.
Point 12 770 9240
1.14
Wiring for circuit/ sub main wiring along with earth wire with the
following sizes of FRLS PVC insulated copper conductor, single
core cable in surface/ recessed medium class PVC conduit as
required
1.14.10 4X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 100 597 59700
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - IV)
BOQ and Estimate of Type-IV residential Quarters for internal electrical installation (Project- ITBP Chapra)
DSR No. Description Unit Total/flat RATE Amount
1.10.2 Group B Point
Page 120
1.17 Supplying and drawing following sizes of FR PVC insulated copper
conductor, single core cable in the existing surface/ recessed
steel/ PVC conduit as required.
1.17.3 3 x 1.5 sq. mm Meter 240 50 12000
1.17.21 3 x 4 sq. mm Meter 500 109.00 54500
1.18
Supplying and drawing following pair 0.5 sq mm FR PVC insulated
annealed copper conductor, unarmored telephone cable in the
existing surface/ recessed steel/ PVC conduit as required.
1.18.2 2 Pair Metre 200 18 3600
1.19
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated, shielded with fine tinned copper
braid and protected with PVC sheath in the existing surface/
recessed steel/ PVC conduit as required.
Mtr. 100 28 2800
1.21
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
the wall and making good the same in case of recessed conduit as
required.
1.21.1 20 mm Mtr. 300 53 15900
1.21.2 25 mm Mtr. 300 65 19500
1.21.3 32 mm Metre 50 85.00 4250
1.24 Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.
1.24.6 Telephone socket outlet Each 12 95.00 1140
1.24.7 TV antenna socket outlet Each 16 94.00 1504
1.24.8 Bell push Each 4 111.00 444
Page 121
1.25
Supplying and fixing stepped type electronic fan regulator on the
existing modular plate switch box including connections but
excluding modular plate etc. as required.
Each 24 284.00 6816
1.26Supplying and fixing modular blanking plate on the existing
modular plate & switch box excluding modular plate as required.Each 36 23.00 828
1.27 Supplying and fixing following size/ modules, GI box along with
modular base & cover plate for modular switches in recess etc as
required.
1.27.1 1 or 2 Module (75mmX75mm) Each 12 166.00 1992
1.31
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required.
Each 72 303 21816
1.32
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16
amps modular switch, connection etc. as required.
Each 68 395 26860
1.34 Supplying and fixing brass batten/ angle holder including
connection etc. as required. Each66
74.004884
1.38Supplying and fixing call bell/ buzzer suitable for single phase, 230
volts, complete as required.Each 4 61 244
1.41
Installation, testing and commissioning of pre-wired, fluorescent
fitting / compact fluorescent fitting of all types, complete with all
accessories and tube etc. directly on ceiling/ wall, including
connection with 1.5 sq. mm FRLS PVC insulated, copper
conductor, single core cable and earthing etc. as required
Each 28 91 2548
Page 122
1.45
Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (up to 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable,
including providing and fixing phenolic laminated sheet cover on
the fan box etc. as required.
Each 24 122 2928
1.50
Installation of exhaust fan in the existing opening, including
making good the damage, connection, testing, commissioning
etc. as required.
1.50.1 Up to 450 mm sweep Each 16 204 3264
2.8 Supplying and fixing following way prewired TP&N MCB
distribution board of steel sheet for 415 volts on surface/ recess
complete with loose wire box, terminal connectors for all
incoming and outgoing circuits, duly prewired with suitable size
FR PVC insulated copper conductor up to terminal blocks, tinned
copper bus bar, neutral link, earth bar, din bar, detachable gland
plate, interconnections, powder painted including earthing etc. as
required.(But without MCB/ RCCB/ Isolator)
2.8.8 12 way (4 + 36), Double door Each 2 12782 25564
2.10
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"
curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required
2.10.1 Single pole Each 30 169 5070
2.13 Supplying and fixing following rating, four pole, 415 volts, isolator
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
2.13.2 63 amps Each 4 670 2680
Page 123
2.14 Supplying and fixing following rating, double pole, (single phase
and neutral), 240 volts, residual current circuit breaker (RCCB),
having a sensitivity current up to 300 milliamperes in the existing
MCB DB complete with connections, testing and commissioning
etc. as required.
2.14.3 63 amps Each 4 2237 8948
2.18
Supplying and fixing 20 amps, 240 volts, SPN industrial type,
socket outlet, with 2 pole and earth, metal enclosed plug top
along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure,
on surface or in recess, with chained metal cover for the socket
out let and complete with connections, testing and
commissioning etc.
as required.
Each 4 954 3816
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
including accessories, and providing masonry enclosure with
cover plate having locking arrangement and watering pipe of 2.7
meter long etc. with charcoal/ coke and salt as required.
Set 4 4490 17960
5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below
ground as strip earth electrode, including connection/
terminating with G.I. nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of G.I. nut
bolt & spring washer spaced at 50mm)
Meter 50 109 5450
6.2
Providing and fixing of lightning conductor finial, made of 25 mm
dia 300 mm long, G.I. tube, having single prong at top, with 85
mm dia 6 mm thick G.I. base plate including holes etc. complete
as required.
Each 1 369 369
6.9
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as required.(For
horizontal run)
Meter 60 35 2100
Page 124
6.10
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as required.(For
vertical run)
Meter 50 72 3600
7.1 Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size direct in ground
including excavation, sand cushioning, protective covering and
refilling the trench etc as required.
7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 60 210.00 12600
MR - RA E-
1
Supply of 3cx150 sq. Mm Aluminium Arm cable , 1.1 kv grade
XLPE insulatedMtr 60 1000.00 60000
MR - RA E-
8
Supplying ,installation ,testing and commissioning of cubical type
meter panel board suitable for 415 V, 3 phase 4 wire 50 Hz AC
supply , fabricated in compartmentalized design from CRCA sheet
of 2 mm thick for frame work and covers , 3 mm thick for gland
plates i/c cleaning and finishing complete with 7 tank process for
powder coating in approved shade having 200 Amp. capacity
extendable type TPN aluminium alloy bus-bars of high
conductivity ,DMC/SMC bus bar support with short circuit
withstand capacity of 31 MVA for 1 sec. ,bottom base channel of
MS section not less than 100mmx50mmx5 mm thick fabrication
shall be done in transportable section ,entire panel shall have a
common copper earth bus bar of size 25mmx5 mm at the rear
with 2 no. earth stud,solid connections from main bus bar to
switch gears with required size of AL. bus bars and control wiring
.
Set 1 237000 237000
Incoming:
160 Amp TP +N MCCB,35 KA (Ics=Icu up to 433 V)
CT of ratio 160/5 Amps = 3 no.
Multifunction meter - V,I,KWH,PF
Page 125
3 nos. phase indication LED lamps with 6 Amp backup MCB
Outgoing:
2 no. 63 Amp. 4 pole MCB ,C Curve
8 no. 63 Amp. 4 pole MCB,curve
8 no. Space for energy meters ( As per Fig. 7 ,CPWD
specifications),encluded meters
MR - RA E-
3Supply of lighting CFL bulbs ( 8 Watt to 14 watt) Each 66 223 14718
MR - RA E-
4Supply of 28 watt tube light. Each 28 904 25312
MR - RA E-
9
Supplying of 1200mm A.C Ceiling fan sweep completeEach 24 2660.00 63840
MR - RA E-
6
Supply of exhaust fan with 300 mm sweep with rust proof body
and noise less operation complete with louvers. Each 16 1470 23520
425645 424390
850035
1700070
Total
For 2 Blocks of Type IV = 850035 x 2=1700070)
Page 126
DSR N.DSR
1.10
Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable
in surface / recessed medium class PVC
conduit, with modular switch, modular plate,
suitable GI box and earthing the point with
1.5 sq.mm. FR PVC insulated copper
conductor single core cable etc as required.
Light point 25 585 14625
Fan point 7 585 4095
exhaust
point4 585 2340
call bell
point2 585 1170
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BOQ and Estimate of Type-V residential Quarters for internal electrical installation
DSR No. Description Unit Total/flat RATE Amount
1.10.2 Group B Point
Page 127
1.11
Wiring for twin control light point with 1.5
sq.mm FR PVC insulated copper conductor
single core cable in surface / recessed
medium class PVC conduit, 2 way modular
switch, modular plate, suitable GI box and
earthing the point with 1.5 sq.mm. FR PVC
insulated copper conductor single core cable
etc as required.
Point 3 770 2310
1.14
Wiring for circuit/ sub main wiring along with
earth wire with the following sizes of FRLS
PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC
conduit as required
1.14.10 4X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 30 597 17910
1.17 Supplying and drawing following sizes of FR
PVC insulated copper conductor, single core
cable in the existing surface/ recessed steel/
PVC conduit as required.
1.17.3 3 x 1.5 sq. mm Meter 100 50.00 5000
1.17.21 3 x 4 sq. mm Meter 250 109.00 27250
1.18
Supplying and drawing following pair 0.5 sq
mm FR PVC insulated annealed copper
conductor, unarmored telephone cable in the
existing surface/ recessed steel/ PVC conduit
as required.
1.18.2 2 Pair Metre 60 18 1080
Page 128
1.19
Supplying and drawing co-axial TV cable RG-6
grade, 0.7 mm solid copper conductor PE
insulated, shielded with fine tinned copper
braid and protected with PVC sheath in the
existing surface/ recessed steel/ PVC conduit
as required.
Mtr. 60 28 1680
1.21
Supplying and fixing of following sizes of
medium class PVC conduit along with
accessories in surface/recess including cutting
the wall and making good the same in case of
recessed conduit as required.
1.21.1 20 mm Mtr. 220 53 11660
1.21.2 25 mm Mtr. 150 65 9750
1.21.3 32 mm Metre 30 85.00 2550
1.24 Supplying and fixing following modular
switch/ socket on the existing modular plate
& switch box including connections but
excluding modular plate etc. as required.
1.24.6 Telephone socket outlet Each 4 95.00 380
1.24.7 TV antenna socket outlet Each 4 94.00 376
1.24.8 Bell push Each 2 111.00 222
1.25
Supplying and fixing stepped type electronic
fan regulator on the existing modular plate
switch box including connections but
excluding modular plate etc. as required.
Each 7 284.00 1988
1.26 Supplying and fixing modular blanking plate
on the existing modular plate & switch box
excluding modular plate as required.
Each
16 23.00 368
Page 129
1.27 Supplying and fixing following size/ modules,
GI box along with modular base & cover plate
for modular switches in recess etc as
required.
1.27.1 1 or 2 Module (75mmX75mm) Each 16 166.00 2656
1.31
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface
or in recess, including providing and fixing 3
pin 5/6 amps modular socket outlet and 5/6
amps modular switch, connection etc. as
required.
Each 13 303 3939
1.32
Supplying and fixing suitable size GI box with
modular plate and cover in front on surface
or in recess, including providing and fixing 6
pin 5/6 & 15/16 amps modular socket outlet
and 15/16 amps modular switch, connection
etc. as required.
Each 24 395 9480
1.34Supplying and fixing brass batten/ angle
holder including connection etc. as required.Each 15 74.00 1110
1.38
Supplying and fixing call bell/ buzzer suitable
for single phase, 230 volts, complete as
required.
Each 2 61 122
Page 130
1.41
Installation, testing and commissioning of pre-
wired, fluorescent fitting / compact
fluorescent fitting of all types, complete with
all accessories and tube etc. directly on
ceiling/ wall, including connection with 1.5 sq.
mm FRLS PVC insulated, copper conductor,
single core cable and earthing etc. as required
Each 10 91 910
1.45
Installation, testing and commissioning of
ceiling fan, including wiring the down rods of
standard length (up to 30 cm) with 1.5 sq.
mm FRLS PVC insulated, copper conductor,
single core cable, including providing and
fixing phenolic laminated sheet cover on the
fan box etc. as required.
Each 7 122 854
1.50
Installation of exhaust fan in the existing
opening, including making good the damage,
connection, testing, commissioning etc. as
required.
1.50.1 Up to 450 mm sweep Each 4 204 816
Page 131
2.8 Supplying and fixing following way prewired
TP&N MCB distribution board of steel sheet
for 415 volts on surface/ recess complete
with loose wire box, terminal connectors for
all incoming and outgoing circuits, duly
prewired with suitable size FR PVC insulated
copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar,
din bar, detachable gland plate,
interconnections, powder painted including
earthing etc. as required.(But without MCB/
RCCB/ Isolator)
2.8.8 12 way (4 + 36), Double door Each 1 12782 12782
2.10
Supplying and fixing 5 amps to 32 amps
rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of
following poles in the existing MCB DB
complete with connections, testing and
commissioning etc. as required
2.10.1 Single pole Each 30 169 5070
2.13 Supplying and fixing following rating, four
pole, 415 volts, isolator in the existing MCB
DB complete with connections, testing and
commissioning etc. as required.
2.13.2 63 amps Each 1 670 670
Page 132
2.14 Supplying and fixing following rating, double
pole, (single phase and neutral), 240 volts,
residual current circuit breaker (RCCB), having
a sensitivity current up to 300 milliamperes in
the existing MCB DB complete with
connections, testing and commissioning etc.
as required.
2.14.3 63 amps Each 3 2237 6711
2.18
Supplying and fixing 20 amps, 240 volts, SPN
industrial type, socket outlet, with 2 pole and
earth, metal enclosed plug top along with 20
amps "C" curve, SP, MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket out let
and complete with connections, testing and
commissioning etc.
as required.
Each 3 954 2862
5.2 Earthing with G.I. earth pipe 4.5 metre long,
40 mm dia including accessories, and
providing masonry enclosure with cover plate
having locking arrangement and watering
pipe etc. with charcoal/ coke and salt as
required.
Set 2 3926 7852
5.9 Supplying and laying 25 mm X 5 mm G.I strip
at 0.50 meter below ground as strip earth
electrode, including connection/ terminating
with G.I. nut, bolt, spring, washer etc. as
required. (Jointing shall be done by
overlapping and with 2 sets of G.I. nut bolt &
spring washer spaced at 50mm)
Meter 8 109 872
Page 133
5.16 Providing and fixing 6 SWG dia G.I. wire on
surface or in recess for loop earthing as
required.
Meter 20 35 700
MR - RA-3Supply of lighting CFL bulbs ( 8 Watt to 14
watt)Each 15 223 3345
MR - RA-4 Supply of 28 watt tube light. Each 10 904 9040
MR - RA-9
Supplying of 1200mm A.C Ceiling fan sweep
complete Each 7 2660.00 18620
MR - RA-6
Supply of exhaust fan with 300 mm sweep
with rust proof body and noise less operation
complete with louvers.
Each 4 1470.00 5880
162160 36885
199045
Total
Grand Total
Page 134
DSR Item no. Description Unit RateQty. Per
Flat
DSR N.DSR
1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FR PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
conduit, with modular switch, modular plate, suitable GI
box and earthing the point with 1.5 sq.mm. FR PVC
insulated copper conductor single core cable etc as
required.
1.10.1 Group A Point 518.00 352 1,82,336.00
1.11
Wiring for twin control light point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, 2 way modular switch,
modular plate, suitable GI box and earthing the point with
1.5 sq.mm. FR PVC insulated copper conductor single core
cable etc as required.
Point 770.00 32 24,640.00
1.14
Wiring for circuit/ sub main wiring along with earth wire
with the following sizes of FRLS PVC insulated copper
conductor, single core cable in surface/ recessed medium
class PVC conduit as required
1.14.5 2 X 10 sq. mm + 1 X 10 sq. mm earth wire Mtr. 327 290 94,830.00
1.17 Supplying and drawing following sizes of FR PVC insulated
copper conductor, single core cable in the existing surface/
recessed steel/ PVC conduit as required.
1.17.3 3 x 1.5 sq. mm Meter 50.00 600 30,000.00
1.17.21 3 x 4 sq. mm Meter 109.00 800 87,200.00
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
BOQ and Estimate of Type-III -32 residential Quarters for internal electrical installation
Amount
Page 1 of 7
Page 135
1.18 Supplying and drawing following pair 0.5 sq mm FR PVC
insulated annealed copper conductor, unarmored
telephone cable in the existing surface/ recessed steel/
PVC conduit as required.
1.18.2 2 Pair Metre 18.00 400 7,200.00
1.19
Supplying and drawing co-axial TV cable RG-6 grade, 0.7
mm solid copper conductor PE insulated, shielded with fine
tinned copper braid and protected with PVC sheath in the
existing surface/ recessed steel/ PVC conduit as required.
Mtr. 28 200 5,600.00
1.21
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of
recessed conduit as required.
1.21.1 20 mm Mtr. 53 350 18,550.00
1.21.2 25 mm Mtr. 65 500 32,500.00
1.21.3 32 mm Metre 85.00 100 8,500.00
1.24 Supplying and fixing following modular switch/ socket on
the existing modular plate & switch box including
connections but excluding modular plate etc. as required.
1.24.6 Telephone socket outlet Each 95.00 16 1,520.00
1.24.7 TV antenna socket outlet Each 94.00 48 4,512.00
1.24.8 Bell push Each 111.00 16 1,776.00
1.27 Supplying and fixing following size/ modules, GI box along
with modular base & cover plate for modular switches in
recess etc as required.
1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 64 10,624.00
1.25
Supplying and fixing stepped type electronic fan regulator
on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
Each 284.00 64 18,176.00
Page 2 of 7
Page 136
1.26
Supplying and fixing modular blanking plate on the existing
modular plate & switch box excluding modular plate as
required.
Each 23.00 148 3,404.00
1.31
Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess, including
providing and fixing 3 pin 5/6 amps modular socket outlet
and 5/6 amps modular switch, connection etc. as required.
.
Each 303.00 144 43,632.00
1.32
Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess, including
providing and fixing 6 pin 5/6 & 15/16 amps modular
socket outlet and 15/16 amps modular switch, connection
etc. as required.
Each 395.00 192 75,840.00
1.34 Supplying and fixing brass batten/ angle holder including
connection etc. as required. Each 74.00152 11,248.00
1.38Supplying and fixing call bell/ buzzer suitable for single
phase, 230 volts, complete as required.Each 61 16 976.00
1.41
Installation, testing and commissioning of pre-wired,
fluorescent fitting / compact fluorescent fitting of all types,
complete with all accessories and tube etc. directly on
ceiling/ wall, including connection with 1.5 sq. mm FRLS
PVC insulated, copper conductor, single core cable and
earthing etc. as required
Each 91 88 8,008.00
1.45
Installation, testing and commissioning of ceiling fan,
including wiring the down rods of standard length (up to 30
cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,
single core cable, including providing and fixing phenolic
laminated sheet cover on the fan box etc. as required.
Each 122 64 7,808.00
1.50
Installation of exhaust fan in the existing opening, including
making good the damage, connection, testing,
commissioning etc. as required.
1.50.1 Up to 450 mm sweep Each 204 48 9,792.00
Page 3 of 7
Page 137
2.7 Supplying and fixing following way prewired SP&N MCB
distribution board of steel sheet for 240 volts on surface/
recess complete with loose wire box, terminal connectors
for all incoming and outgoing circuits, duly prewired with
suitable size FR PVC insulated copper conductor up to
terminal blocks, tinned copper bus bar, neutral link, earth
bar, din bar, detachable gland plate, interconnections,
powder painted including earthing etc. as required. (But
without MCB/ RCCB/ Isolator)
2.7.6 2 + 12 way, Double door Each 3613 16 57,808.00
2.10
Supplying and fixing 5 amps to 32 amps rating, 240/415
volts, "C" curve, miniature circuit breaker suitable for
inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc.
as required
2.10.1 Single pole Each 169 366 61,854.00
2.12Supplying and fixing following rating, double pole, 240
volts, isolator in the existing MCB DB complete with
connections, testing and commissioning etc. as required
2.12.2 63 amps Each 250 4 1,000.00
2.14
Supplying and fixing following rating, double pole, (single
phase and neutral), 240 volts, residual current circuit
breaker (RCCB), having a sensitivity current up to 300
milliamperes in the existing MCB DB complete with
connections, testing and commissioning etc. as required
2.14.3 63 amps Each 2237 4 8,948.00
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm
thick including accessories, and providing masonry
enclosure with cover plate having locking arrangement and
watering pipe of 2.7 meter long etc. with charcoal/ coke
and salt as required.
Set 4490 4
17,960.00
Page 4 of 7
Page 138
5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter
below ground as strip earth electrode, including
connection/ terminating with G.I. nut, bolt, spring, washer
etc. as required. (Jointing shall be done by overlapping and
with 2 sets of G.I. nut bolt & spring washer spaced at
50mm)
Meter 109.00 36
3,924.00
6.2 Providing and fixing of lightning conductor finial, made of
25 mm dia 300 mm long, G.I. tube, having single prong at
top, with 85 mm dia 6 mm thick G.I. base plate including
holes etc. complete as required.
Each 369.00 2
738.00
6.9 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet
or surface of wall for lightning conductor complete as
required.(For horizontal run)
Meter 35.00 80
2,800.00
6.10 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet
or surface of wall for lightning conductor complete as
required.(For vertical run)
Meter 72.00 30
2,160.00
7.1 Laying of one number PVC insulated and PVC sheathed /
XLPE power cable of 1.1 KV grade of following size direct in
ground including excavation, sand cushioning, protective
covering and refilling the trench etc as required.
7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 210.00 60 12,600.00
MR - RA E-1Supply of 3cx150 sq. Mm Aluminium Arm cable , 1.1 kv
grade XLPE insulatedMtr 1000.00 60
60,000.00
.
Page 5 of 7
Page 139
MR - RA E-7
Supplying ,installation ,testing and commissioning of
cubical type meter panel board suitable for 415 V, 3 phase
4 wire 50 Hz AC supply , fabricated in compartmentalized
design from CRCA sheet of 2 mm thick for frame work and
covers , 3 mm thick for gland plates i/c cleaning and
finishing complete with 7 tank process for powder coating
in approved shade having 200 Amp. capacity extendable
type TPN aluminium alloy bus-bars of high conductivity
,DMC/SMC bus bar support with short circuit withstand
capacity of 31 MVA for 1 sec. ,bottom base channel of MS
section not less than 100mmx50mmx5 mm thick
fabrication shall be done in transportable section ,entire
panel shall have a common copper earth bus bar of size
25mmx5 mm at the rear with 2 no. earth stud,solid
connections from main bus bar to switch gears with
required size of AL. bus bars and control wiring .
Set 257000 1
2,57,000.00
Incoming:
160 Amp TP +N MCCB,35 KA (Ics=Icu up to 433 V)
CT of ratio 160/5 Amps = 3 no.
Multifunction meter - V,I,KWH,PF
3 nos. phase indication LED lamps with 6 Amp backup MCB
Outgoing:
2 no. 63 Amp. 4 pole MCB ,C Curve
16 no. 63 Amp. double pole MCB,curve
16 no. Space for energy meters ( As per Fig. 7 ,CPWD
specifications),included meters
Page 6 of 7
Page 140
MR - RA E-3 Supply of lighting CFL bulbs ( 8 Watt to 14 watt) Each 223 152 33,896.00
MR - RA E-4 Supply of 28 watt tube light. Each 904 88 79,552.00
MR - RA E-5Supplying of 1200mm A.C Ceiling fan sweep complete
Each 1600.00 128 2,04,800.00
MR - RA E-6Supply of exhaust fan with 300 mm sweep with rust proof
body and noise less operation complete with louvers. Each 1470.00 48 70,560.00
8,58,464.00 7,05,808.00
15,64,272.00
31,28,544.00
For One Block
For 2 Blocks of Type III QTRS
Page 7 of 7
Page 141
S.NO. DESCRIPTION D.S.R AMOUNT NON-DSR AMOUNT
I EXTERNAL SEWERAGE SYSTEM 95,83,145.72 0.00
II EXTERNAL DRAINAGE SYSTEM 105,52,349.75 1,74,873.96
III EXTERNAL WATER SUPPLY SYSTEM 20,11,757.65 42,37,100.30
IV UNDER GROUND WATER TANK & PUMP ROOM 23,15,991.24 13,91,896.80
V ROAD WORK 311,60,754.05 0.00
VI EXTERNAL ELECTRICAL SYSTEM & LIGHTING WORK 20,18,256.90 102,16,692.98
TOTAL 576,42,255.31 160,20,564.04
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at Kalikiri,
Chittoor (A.P)
EXTERNAL SEWERAGE, DRAINAGE, WATER SUPPLY SYSTEM, ROAD WORK &
EXTERNAL ELECTRICAL SYSTEM & LIGHTING WORK
ABSTRACT OF COST
TOTAL COST 736,62,819.35
AMOUNT (in Rs.)
Signature of EPIL
1 / 1
EXT (CIVIL&ELECT) WORK SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 142
DSR 2014 NON-DSR
[1] EXTERNAL SEWERAGE SYSTEM
SECTION-I - SEWERAGE NETWORK 60,52,158.72
SECTION-II- SWERAGE TREATMENT PLANT (MECH & ELECTRICAL WORKS & AMC FOR STP) 35,30,987.00
TOTAL [I] 95,83,145.72
[2] EXTERNAL DRAINAGE SYSTEM
SECTION-I - DRAINAGE NETWORK 97,28,591.65
SECTION-II - RAIN WATER HARVESTING PITS (4 nos) 8,23,758.10 1,74,873.96
TOTAL [II] 105,52,349.75 1,74,873.96
[3] EXTERNAL WATER SUPPLY SYSTEM
SECTION-I - DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY 20,11,757.65 6,74,520.30
SECTION-III - PUMPING MACHINERY 1,67,580.00
SECTION -V - permission from local body authorities 17,00,000.00
SECTION-VI - TUBEWELLS 16,95,000.00
TOTAL [III] 20,11,757.65 42,37,100.30
[4] ROAD WORK
ROAD WORK / HORTICULTURE / EARTH WORK / SIGNAGES/GUARD ROOMS 311,60,754.05 0.00
TOTAL [IV] 311,60,754.05 0.00
[5] UNDER GROUND WATER TANK & PUMP ROOM WORK
UNDER GROUND WATER TANK & PUMP ROOM 23,15,991.24 13,91,896.80
TOTAL [V] 23,15,991.24 13,91,896.80
TOTAL [I TO V] 556,23,998.41 58,03,871.06
GRAND TOTAL 614,27,869.47
SECTION [A]
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at
Kalikiri, Chittoor (A.P)
EXTERNAL SEWERAGE, DRAINAGE, WATER SUPPLY & ROAD WORK
S.NO NAME OF SUB-HEADAMOUNT [INR]
SUMMARY OF COST
Signature of EPIL
1 / 1
EXT. CIVIL WORK SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 143
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
[1
]EXTERNAL SEWERAGE SYSTEM
SEWERAGE NETWORK
(D.S.R. 2014 ITEMS)
1. Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated
soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and disposing of surplus
excavated soil as directed, within a lead of 50 m :
2.10.1 All kinds of soil2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre 720.00 208.30 1,49,976.00
2 2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m,
but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). metre 1180.00 281.21 3,31,821.90
3 2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth exceeding 3 m in
depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5
metre.) metre 1770.00 722.80 12,79,357.77
19.10 supply and laying of Stoneware pipe19.1.4 250 mm. dia. RCC Pipes metre 239.00 696.50 1,66,463.50
19.1.5 300 mm. dia. RCC Pipes metre 478.00 770.40 3,68,251.20
400 mm. dia. RCC Pipes metre 2200.00 881.00 19,38,200.00
5 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering. (for RCC pipe bedding) by 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone agg. 40 mm nominal size) Cum 15.00 4301.15 64,517.25
BILL OF QUANTITIES (EXTERNAL SEWERAGE, DRAINAGE AND WATER SUPPLY SYSTEM)
SECTION-I
4
Signature of EPIL
1 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 144
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
8 19.11 Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at
top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement
foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal
size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all
complete as per standard design :
19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm
internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than
182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm
thick cement plaster at the external surface shall be paid for separately) :
19.11.1.2 With Sewer bricks conforming IS : 4885 each 8.00 17166.25 1,37,330.00
9 19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m
:19.12.2 With Sewer bricks conforming IS : 4885 metre 7.00 6856.95 47,998.65
12 19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :
10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23
mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm
space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing
and suitable to with stand the bend test and chemical resistance test as per specifications and
having manufacture's permanent identification mark to be visible even after fixing, including
fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) complete as per design.each 150.00 311.60 46,740.00
Signature of EPIL
2 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 145
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
13 19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to
main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop
pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10
graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting
holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside plastered with plastered
with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked
joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand)
joints between sand cast iron tee and S.W. pipe, making required channels between complete as
per standard design and specifications :
19.22.2 150 mm dia sand cast iron drop connection each 15.00 8544.30 1,28,164.50
14 19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete :
19.23.2 For 150 mm dia sand cast iron drop connection metre 15.00 2508.70 37,630.50
15 Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4
coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone
aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement
mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm
nominal size) finishd with a floating coat of neat cement complete as per standard design
19.7.1.1 Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm
internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and
wt. of frame 15 kg) each 50.00 8507.00 4,25,350.00
19.7.2.1 Inside size 120 X 90 cm. and 90 cm. deep including CI cover with frame (medium duty) 500 mm
internal diameter, total weight of cover and frame to be not less than 116 kg (wt of cover 58 kg
and wt. of frame 58 kg.) each 41.00 18304.45 7,50,482.45
16 Extra for depth for manhole with F.P.S. bricks19.8.1.1 size 90 X 80 cm m 10.00 5638.20 56,382.00
Signature of EPIL
3 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 146
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
19.8.1.2 size 1.2m X 90 cm m 20.00 6174.65 1,23,493.00
[A] 60,52,158.72
60,52,158.72
[2] EXTERNAL DRAINAGE SYSTEM
DRAINAGE NETWORK(D.S.R. 2012 ITEMS)
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated
soil and disposal of surplus excavated soil as directed, within a lead of 50 m.Upto 1.5 M depth.
2.8.1 All kinds of soil. Cum 1625.00 157.50 2,55,937.50
2 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering. by 1:4:8 (1 cement : 4 coarse sand : 8 graded stone agg. 40 mm
nominal size) - for PCC bed of drains Cum 345.00 4301.15 14,83,896.75
3 4.1.3 Providing and laying in position cement concrete of specied grade excluding the cost of
centering and shuttering (for filling of drain haunches) by 1:2:4 (1 cement : 2 coarse sand : 4
graded stone agg. 20 mm nominal size) Cum 290.00 5466.30 15,85,227.00
4 6.1.1 Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation and plinth
by Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 966.00 4918.65 47,51,415.90
5 13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Sq.m 3900.00 163.35 6,37,065.00
SLAB CULVERT6 5.3+diff.
of
5.2.2&5.2
.3
Reinforced cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse
sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering
and reinforcement. (Rate 6778.20+(7074.30 - 6570.00)=7282.50Cum 51.00 7282.50 3,71,407.50
TOTAL D.S.R. 2014
SECTION -I
1
Signature of EPIL
4 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 147
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
7 5.22.6 Reinforcement for RCC work including staightening, cutting, bending, placing in position and
binding all complete upto plinth level using Thermo-Mechanically Treated bars Kg 7800.00 68.10 5,31,180.00
8 5.9.3 Centering and shuttering including struting, proping etc and removal of form for suspended
floors roofs etc for culvert slab Sqm 280.00 401.65 1,12,462.00
[A] 97,28,591.65
97,28,591.65
RAIN WATER HARVESTING[A] DESILTING CHAMBER (1 No.)
2.6 Earth work In excavation by mechanical means (Hydraulic excavator)/manual means over areas
(exceeding 30cm in depth. 1.5m in width as per as 10 sq.m on plan) including disposal of
excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly
dressed.
2.6.1 All kinds of soil Cu.M 221.00 155.60 34,387.60
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in
layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering
, lead up to 50 m and lift up to 1.5m. Cu.M 15.00 112.40 1,686.00
2.26 Extra for every additional lift of 1.5 m or part there of in:2.26.1 All kinds of soil. Cu.M 15.00 46.25 693.75
4.1 Providing and laying in position cement cncrete of specified grade excluding the cost of centring
and shuttering - all work upto plinth level.
4.1.8 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cu.M 1.50 4301.15 6,451.73
5.9 Centring and shuttering including strutting, proppintg etc. and removal of form for:5.9.3 Suspended floors,roofs, landings, balconies and access platform. Sq.M 2.00 401.65 803.30
5.9.16 Edges of slabs and breaks in floors and walls,5.9.16.1 Under 20 cm wide R.M. 5.00 116.40 582.00
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and
binding all complete.
TOTAL D.S.R. 2013
SECTION-II
Signature of EPIL
5 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 148
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
5.22.6 Thermo Mechanically Treated bars. Kg. 10.00 68.10 681.00
5.33 Providing and laying in position machine batched, machine mixed and machine vibrated design
mix cement concrete of specified grade for reinforced cement concrete structural elements
excluding the cost of centring, shuttering, l finishing and reinforcement. including Admixtures in
recomended proportions. (as per IS 9103) to accelerate, retard setting of concrete improve work
ability without impairing strength and durability as per directio of Engineer in charge M-25 grade
reinforced cement concrete. by using 410kg. of cement per cum. of concrete. All work up to floor
V level Cu.M 5.00 6296.15 31,480.75
6.1 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement: 4 coarse sand) Cu.M 5.00 4918.65 24,593.25
13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Cum 15.00 163.35 2,450.25
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement
mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete:
19.1.3 200 mm diameter R.M. 5.00 462.15 2,310.75
1,06,120.38
NON DSR ITEMSNS.1 Supplying & Filling with coarse sand in Trench Cu.M 1.50 1218.56 1,827.84
NS.2 Supplying & Fixing SFRC Mainhole Cover & Frame (Size 900x600) R.M. 3.00 2620.00 7,860.00
9,687.84
[B] RECHARGE PIT (1 No.)
DSR ITEMS
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.M on plan) including
dressing of sides and ramming ob bottoms, lift upto 1.5m, including getting out the excavated
soil and disposal of surplus excavated soil as directed, withen a lead of 50m.
2.8.1 All kinds of soil Cu.M 15.00 157.50 2,362.50
2.26 In all kind of soil upto 1.5m to 3.0m. depth Cu.M 15.00 162.66 2,439.90
2.26.1 In all kind of soil upto 3.0m to 4.5m. depth Cu.M 10.00 46.25 462.50
NON-DSR
DSR 2012
Signature of EPIL
6 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 149
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in
layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering
, lead up to 50 m and lift up to 1.5m. Cu.M 15.00 112.40 1,686.00
4.1 Providing and laying in position cement cncrete of specified grade excluding the cost of centring
and shuttering - all work upto plinth level.4.1.8 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cu.M 2.00 4301.15 8,602.30
5.9 Centring and shuttering including strutting, proppintg etc. and removal of form for:5.9.3 Suspended floors,roofs, landings, balconies and access platform. Sq.M 12.00 401.65 4,819.80
5.9.16 Edges of slabs and breaks in floors and walls,5.9.16.1 Under 20 cm wide R.M. 15.00 116.40 1,746.00
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and
binding all complete.5.22.6 Thermo Mechanically Treated bars. Kg. 85.00 68.10 5,788.50
5.33 Providing and laying in position machine batched, machine mixed and machine vibrated design
mix cement concrete of specified grade for reinforced cement concrete structural elements
excluding the cost of centring, shuttering, l finishing and reinforcement. including Admixtures in
recomended proportions. (as per IS 9103) to accelerate, retard setting of concrete improve work
ability without impairing strength and durability as per directio of Engineer in charge M-25 grade
reinforced cement concrete. by using 410kg. of cement per cum. of concrete. All work up to floor
V level Cu.M 3.00 6296.15 18,888.45
6.1 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement: 4 coarse sand) Cu.M 10.00 4918.65 49,186.50
13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Cum 15.00 163.35 2,450.25
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement
mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete:
19.1.3 200 mm diameter R.M. 3.00 462.15 1,386.45
99,819.15
NON DSR ITEMSNS.3 Supplying & Filling with coarse sand in Trench Cu.M 3.00 457.50 1,372.50
DSR 2014
Signature of EPIL
7 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 150
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
NS.4 Drilling of recharge bore well 300mm dia by manual / rig machine upto a depth till 5 meter above
highest level. R.M. 15.00 565.25 8,478.75
NS.5 Providing & Lovering 160mm outer dia PVC tube well casing slotted pipe 6kg/ sq.cm with top
socket & plug. R.M. 15.00 452.20 6,783.00
NS.6 Filling of 1.6 - 4.8mm pea gravel around tube well. Cu.M 1.50 3990.00 5,985.00
NS.7 Supplying & Laying stone borders 50-150mm size Cu.M 3.00 771.40 2,314.20
NS.8 Steel Wire Fabric Sq.M 12.00 452.20 5,426.40
NS.9 Supplying & Fixing 560dia SFRC Cover & Frame Heavy Duty. Each 3.00 1223.60 3,670.80
NON-DSR 34,030.65
Total DSR For 4 Pits (Section II) 8,23,758.10
Total NON-DSR For 4 Pits (Section II) 1,74,873.96
[3
]
EXTERNAL WATER SUPPLY SYSTEM
SECTION-III DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY(D.S.R. 2014 ITEMS)
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated
soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and disposing of surplus
excavated soil as directed, within a lead of 50 m :
2.10.1 All kinds of soil2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. metre 2005.00 127.55 2,55,737.75
2.10.1.2 Pipes etc exceeding 80 mm but not exceeding 300 mm dia. metre 130.00 208.30 27,079.00
2 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External work18.12.6 50 mm dia nominal bore metre 1754.00 399.50 7,00,723.00
18.12.8 80 mm dia nominal bore metre 668.00 637.05 4,25,549.40
1
Signature of EPIL
8 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 151
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
3 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved
quality :
18.40.6 50 mm diameter pipe metre 1754.00 14.15 24,819.10
18.40.8 80 mm diameter pipe metre 668.00 20.25 13,527.00
4 18.41 Providing and filling sand of grading zone V or coarser grade, all- round the G.I. pipes in external
work :18.41.5 40 mm diameter pipe metre 70.00 71.75 5,022.50
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :
18.72.1 100 mm dia Ductile Iron Class K-7 pipes metre 30.00 924.05 27,721.50
18.72.2 150 mm dia Ductile Iron Class K-7 pipes metre 40.00 1336.70 53,468.00
18.72.3 200 mm dia Ductile Iron Class K-7 pipes metre 60.00 1849.00 1,10,940.00
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including
testing of joints and the cost of rubber gasket :18.70.1 100 mm dia pipes Joint 5.00 61.85 309.25
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions
etc. (the tail pieces if required will be paid separately) :
18.31.1.2 100 mm. dia. Class II Each 3.00 3921.30 11,763.90
18.31.3.2 150 mm. dia. Class II Each 3.00 5694.00 17,082.00
18.31.4.2 200 mm. dia. Class II Each 3.00 11260.60 11,579.00
9 18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber
insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :
18.59.1 50 mm dia Each 5.00 4778.30 23,891.50
18.59.2 80 mm dia Each 5.00 6172.10 30,860.50
5
7
8
Signature of EPIL
9 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 152
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
10 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
:18.17.4 50 mm nominal bore Each 5.00 750.75 3,753.75
18.17.6 80 mm nominal bore Each 5.00 1920.60 9,603.00
11 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering (for thrust blocks at bends and junctions of water lines ) by 1:2:4 (1
cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) Cum 10.00 5466.30 54,663.00
12 18.33.1 Constructing brick masonry chamber 600 x 600 x 750 mm inside with common burnt clay
F.P.S.(non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse
sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mm top diameter, 160 mm
bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix
(1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40
mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand )
12 mm thick finished with a floating coat of neat cement complete as per standard design Each 15.00 6754.30 1,01,314.50
13 18.80 Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms
per litre of water and cleaning the same with fresh water, operation to be repeated three times
including getting the sample of water from the disinfected main tested in the municipal
laboratory. 100.00
18.80.2 100 mm diameter C.I. pipe metre 40.00 926.60 37,064.00
18.80.4 150 mm diameter C.I. pipe metre 20.00 1395.40 27,908.00
18.80.5 200 mm diameter C.I. pipe metre 20.00 1868.90 37,378.00
[A] 20,11,757.65
20,11,757.65
MAIN DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY ( NON DSR)
TOTAL D.S.R. 2014
SECTION-III
Signature of EPIL
10 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 153
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
1 Excavating trenches upto 1.5 meter depth in all kind of soil of required width for pipes.
including excavation for sockets and dressing of sides ramming of bottoms including getting out
the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth
including consolidating each deposited layer by ramming, watering, etc & disposing of surplus
excavated soil as directed within a lead of 50m or as directed at site by engg-in-charge.
Pipes etc from 80 mm and above but not exceeding 300 mm dia. metre 203.00 152.95 31,048.85
2 Supply, laying, jointing, testing and commissioning of M.D.P.E. pipes (PE 80) including
transportation upto the site, jointing by electro fusion welding, providing and fixing all
electrofusion fittings i.e. bends, tees, couplers, junctions, tapers, reducers, adopters, end caps,
flanges with nut and bolts for fixing of appurtenances complete in all respects. (Make : Duraline /
Reliance / Kimplas)(PN 8)
110 mm. OD. (PN 8) metre 50.00 1057.30 52,865.00
160 mm. OD. (PN 8) metre 150.00 2101.40 3,15,210.00
200 mm. OD. (PN 8) metre 10.00 3192.00 31,920.00
3 Supply, fixing in position, testing ISI marked cast iron double flanged sluice valves as per
IS:14846-2000, (PN 10) with SS stem, bolts, nuts, 3 mm thick rubber gaskets including
transporting to worksite, Complete as per drawings & directions of the Engineer-in-charge. (MAKE : Kirloskar /Venus / IVC / Zaloto / Audco)
100 mm nominal dia Each 4.00 10201.10 40,804.40
150 mm nominal dia Each 3.00 15514.45 46,543.35
200 mm nominal dia Each 2.00 28109.55 56,219.10
4 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20
mm nominal size) for thrust blocks at bends and junctions of water lines including necessary
excavation, centering, shuttering etc as directed and required at site to complete the work..Cum. 3.00 5639.20 16,917.60
Signature of EPIL
11 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 154
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
5 Constructing brick masonry chamber 600 x 600 x 1050 mm inside with F.P.S. brick work in
cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve, necessary excavation,
foundation concrete 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick
finished with a floating coat of neat cement complete as per standard design including fixing
of CI/SFRC cover and frame in 150 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4
gradded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation,
refilling and disposal of surplus earth as directed complete in all respects. (The cost of cover and
frame shall be seperate) Each 8.00 7315.00 58,520.00
6 Providing Precast Cement Concrete / SFRC Valve Chamber cover and frame conforming to IS :
12592-2002., The concrete mix should be not less than M 30.Heavy duty, HD-20 grade designation - 600x600 mm internal size. Each 8.00 3059.00 24,472.00
[A] 6,74,520.30
6,74,520.30
PUMPING MACHINERY
IMPORTANT NOTES :
a) The Tenderer must submit along with his offer, the make and the model of the pump unit
proposed by him.
b) Required power supply would be made available to the main distribution panel by other
agency. Cabling from main distribution board to motor control centre (MCC) for each package and
from MCC to individual pump is in the scope of this contract.c) Wherever mechanical seal has been asked for, it must be `factory fitted` at pump
manufacturer`s works.
SUBMERSIBLE DRAINAGE PUMPS
Supply, installing, testing and commissioning drainage pumping system in the sumps of
plant room comprising of the following:
SECTION-IV
TOTAL
Signature of EPIL
12 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 155
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
a) 2 Nos.Vertical fully floodable type submersible drainage pumps in close coupled design
single stage, suitable for handling minimum 12 mm dia solids.Duty
Discharge of each pump : 9 M3/hr.
Working Head : 10 M
Material of Construction (M.O.C):
Corrosion Resistant in general : Bearings — Anti friction,
prelubricated ball bearings,
packed with grease for life. Motor: — Dry Motor with built in over
load protection Protection - IP68.
Insulation Class - F
b) Electric control panel for automatic operation of pumps as per the water level in the sump.The
pump operation shall be controlled with magnetic float type level controller.The Panel shall
comprise of incoming MCB, digital voltmeter & ammeter, On-Off lamps, starters with circuit
breakers for each pump, rotating start sequence, both pumps to work simultaneously to
meet peak flow
There shall be an audio-visual alarm, if any pump fails to start.c) Power cabling between panel and pumps.
NS d) Pump suspension systemwith Stainless Steel Sling wire with `U` clamp. Set 1.00 167580.00 1,67,580.00
Details of Pump offered
(To be filled in by the tenderer)Make:
Model:
HP/KW:
M.O.C : Casing —………………..
: Impeller — ……………..
: Shaft — ……………….
TOTAL for Submersible Drainage Pumps 1,67,580.00
Signature of EPIL
13 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 156
S.
No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT
MR Liasioning and Installation charges for Electricity Board and Gram panchayath
On reciept of official challans, payments will be released to the contractor JOB 1.00 1700000.00 17,00,000.00
TOTAL (SECTION-V) 17,00,000.00
TUBE WELLSBoring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire &
running charges of all equipments, tools, plants & machineries,submersible pump of suitable capacity required for
the job, all complete as per direction of Engineer -in-charge,
Rocky strata including Boulders( 1000 feet)
6" dia 3 Job 1 565000.00 16,95,000.00
16,95,000.00
SECTION-VI
TOTAL (SECTION-VI)
SECTION-V
Signature of EPIL
14 / 14
EXT SWD BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 157
DSR 2014 NON-DSR
IV ROAD WORK 30490056.84
V DRAINAGE 59211.00
VI HORTICULTURE AND LAND SCAPING 129385.00
TOTAL 30678652.84 0.00
GRAND TOTAL 30678652.84
PROPOSED CONSTRUCTION OF EXTERNAL DEVELOPMENT & BULK SERVICES (CIVIL & ELECTRICAL WORKS)
29th BATTALION FOR ITBP AT JABALPUR (M.P.)
S.NO NAME OF SUB-HEADAMOUNT
SUMMARY OF COST
ROAD WORK, HORTICULTURE, EARTH WORK & SIGNAGES
Signature of EPIL
1 / 1
ROAD WORK SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 158
V
14 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. complete :19.6.2 150 mm dia. R.C.C. pipe R.M 170.00 348.30 59,211.00
59,211.00
VI
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the
excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and
mixing withsludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by
20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water,
filling with earth if necessary, watering and finally fine dressing, leveling etc.including stacking and
disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed,
within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for
separately).
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or
sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part
of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of
rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if
needed to be paid for separately) :
cum 1145.00 113.00 1,29,385.00
1,29,385.00
HORTICULTURE AND LAND SCAPING 23.0
BILL OF QUANTITIES
ROAD WORK, HORTICULTURE & EARTH WORK
S
NoDSR -2014 DESCRIPTION UNIT QTY
[TOTAL V]
RATE
(in Rs)
AMOUNT
(in Rs)
DRAINAGE 19.0
Signature of EPIL
1 / 1
ROAD WORK BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 159
S.NO. DESCRIPTION D.S.R AMOUNT NON-DSR AMOUNT
I CIVIL WORKS 2285256.05 0.00
II PLUMBING WORK 1368070.00
III INTERNAL ELECTRICAL WORK 30735.19 23826.80
TOTAL 2315991.24 1391896.80
GRAND TOTAL
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at
Kalikiri, Chittoor (A.P)
PUMP ROOM & UNDERGROUND WATER TANK
SUMMARY OF COST
3707888.04
Signature of EPIL
1 / 1
PUMP ROOM & UGT SUMM
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 160
DSR 2012 NON-DSR
I EARTH WORK 109527.50
II CONCRETE WORK 129165.95
III REINFORCED CEMENT CONCRETE 1327513.55
IV BRICK WORK 84086.80
V STEEL WORK 24036.40
VI FLOORING 285787.50
VII FINISHING 53604.45
VIII WATER SUPPLY 2494.05
IX DRAINAGE 11185.10
X WATER PROOFING 257854.75
TOTAL 2285256.05 0.00
GRAND TOTAL 2285256.05
Proposed construction of external development & bulk services (civil & electrical works) for ITBP
at Kalikiri, Chittoor (A.P)
CIVIL WORK
S.NO NAME OF SUB-HEADAMOUNT
SUMMARY OF COST
PUMP ROOM & UNDER GROUND TANK
Signature of EPIL
1 / 1
PUMP ROOM & UGT CIVIL SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 161
I
1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm
on plan) including disposal of excavated earth, lead upto 50m and lift upto
1.5m, disposed earth to be levelled and neatly dressed.2.6.1 All kinds of soil. Cu.M 158.00 155.60 24584.80
2 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm
on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5
m, disposed earth to be levelled and neatly dressed.2.7.1 Ordinary Rock Cu.M 262.00 244.60 64085.20
4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating Each
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Cu.M 55.00 85.05 4677.75
5 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /banking
excavated or stacked materials.2.26.2 Ordinary or hard rock. Cu.M 150.00 82.95 12442.50
6 2.28 Surface dressing of the ground including removing vegetation and in-equalities
not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto
1.5 m.2.28.1 All kinds of soil. 100 Sq.M 3.00 1245.75 3737.25
[TOTAL I] 109527.50
II
7 4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work upto plinth level.
EARTH WORK 2.0
CONCRETE WORK 4.0
BILL OF QUANTITIES
PUMP ROOM & UNDER GROUND TANK
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
Signature of EPIL
1 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 162
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal
size)
Cu.M 15.00 4301.15 64517.25
8 4.2 Providing and laying cement concrete in retaining walls, return walls, walls
(any thickness) including attached pilasters, columns, piers, abutments, pillars,
posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks,
anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five
level, excluding the cost of centering, shuttering and finishing :
4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size)
Cu.M 3.00 6450.00 19350.00
4.2.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size).
Cu.M 3.00 5818.00 17454.00
9 4.10 Providing and laying damp-proof course 40mm thick with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal
size).
Sq.M 8.00 257.80 2062.40
10 4.12 Extra for providing and mixing water proofing material in cement concrete work
in doses by weight of cement as per manufacturer’s specification.
per Bag
of 50 kg
cement
2.00 48.15 96.30
11 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved
quality using 1.7kg per square metre on damp proof course after cleaning the
surface with brushes and finally with a piece of cloth lightly soaked in kerosene
oil.
Sq.M 4.00 132.00 528.00
12 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3
coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick
bed of dry brick ballast 40 mm nominal size, well rammed and consolidated
and grouted with fine sand including finishing the top smooth
Sq.M 60.00 419.30 25158.00
[TOTAL II] 129165.95
III REINFORCED CEMENT CONCRETE 5.0
Signature of EPIL
2 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 163
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
13 5.9 Centering and shuttering including strutting, propping etc. and removal of form
for :(a) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sq.M 20.00 196.45 3929.00
(b) 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and
string courses etc.
Sq.M 350.00 360.80 126280.00
(c) 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sq.M 150.00 401.65 60247.50
(d) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sq.M 60.00 332.15 19929.00
(e) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sq.M 30.00 453.35 13600.50
(f) 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sq.M 5.00 395.65 1978.25
(g) 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window
sills, string courses, bands, copings, bed plates, anchor blocks and the like.
Sq.M 3.00 196.45 589.35
(h) 5.9.16 Edges of slabs and breaks in floors and walls.5.9.16.1 Under 20 cm wide Sq.M 80.00 116.40 9312.00
(i) 5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sq.M 2.00 492.35 984.70
14 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars. Kg 8000.00 68.10 544800.00
15 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars. Kg 1000.00 68.10 68100.00
16 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C
Projections
R.M 4.00 30.75 123.00
17 5.33 Providing and laying in position machine batched and machine mixed design
mix M-25 grade cement concrete for reinforced cement concrete work, using
cement content as per approved design mix, including pumping of concrete to
site of laying but excluding the cost of centering, shuttering, finishing and
reinforcement, including admixtures in recommended proportions as per IS:
9103 to accelerate, retard setting of concrete, improve workability without
impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less
cement used as per design mix is payable/recoverable separately).
Signature of EPIL
3 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 164
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
(a) 5.33.1 All works upto plinth level. Cu.M 65.00 6269.15 407494.75
(b) 5.33.2 All works above plinth level upto floor V level. Cu.M 10.00 7014.55 70145.50
1327513.55
IV
18 6.34 Brick work with common FLYASH bricks of class designation 7.5 in foundation
and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 6.00 6006.20 36037.20
19 6.34 Brick work with common FLYASH bricks of class designation 7.5 in
superstructure above plinth level up to floor V level in all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 8.00 6006.20 48049.60
TOTAL [IV] 84086.80
V
20 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm
angle iron and 3mm M.S. gusset plates at the junctions and corners, all
necessary fittings complete, including applying a priming coat of approved
steel primer.10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. Sq.M 4.00 3073.85 12295.40
21 10.14 Providing and fixing pressed steel door frames confirming to IS:4351
manufactured from commercial mild steel sheet of 1.60mm thickness including
hinges jamb, lock jamb, bead and if required angle threshold of mild steel
angle of section 50x25 mm, or base ties of 1.60mm, pressed mild steel welded
or rigidly fixed together by mechanical means, including M.S. pressed butt
hinges 2.5mm thick with mortar guard,lock strike-Plate nad shock absorbers as
specified and applying a coat of approved steel primer after pre-treament of
the surface as directed by Engineer-in Charge.10.14.1 Profile B10.14.1.1 Fixing with adjustable lug with split end tail to Each jamb. R.M 15.00 377.70 5665.50
TOTAL [III]
BRICK WORK 6.0
STEEL WORK 10.0
Signature of EPIL
4 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 165
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
22 10.25 Steel work welded in built up sections/ framed work including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
Kg 50.00 90.10 4505.00
23 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing, balcony railing, staircase railing and similar works, including applying a
priming coat of approved steel primer.10.26.1 M.S. tube. Kg 15.00 104.70 1570.50
24036.40
VI
24 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate) finished with a floating coat of neat cement including cement slurry,
but excluding the cost of nosing of steps etc. complete.11.3.1 40mm thick with 20mm nominal size stone aggregate. Sq.M 80.00 353.35 28268.00
25 MR Madanapalli slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade of the
slab including rubbing and polishing complete with base of cement mortar 1 : 4
(1 cement : 4 coarse sand) :25 mm thick. Sq.M 60.00 1364.00 81840.00
26 MR Madanapalli slabs 20 mm thick in risers of steps, skirting, dado and pillars laid
on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and
jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.
Sq.M 8.00 1364.00 10912.00
TOTAL [V]
FLOORING 11.0
Signature of EPIL
5 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 166
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
27 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS :
15622 (thickness to be specified by the manufacturer ) of approved make in all
colours, shades except burgundy, bottle green, black of any size as approved
by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick
bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm including pointing in white cement mixed with
pigment of matching shade complete.
Sq.M 150.00 836.65 125497.50
28 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be
specified by the manufacturer) of 1st quality conforming to IS : 15622 of
approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing
the joints with white cement and matching pigment etc., complete.
Sq.M 50.00 785.40 39270.00
285787.50
VII
29 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :13.2.2 1:6 (1 cement: 6 fine sand) Sq.M 50.00 172.80 8640.00
30 13.4 12 mm cement plaster of mix :13.4.1 1:4 (1 cement: 4 coarse sand) Sq.M 60.00 172.30 10338.00
31 13.16 6 mm cement plaster of mix :13.16.1 1:3 (1 cement: 3 fine sand) Sq.M 150.00 134.70 20205.00
32 13.18 Neat Cement punning Sq.M 60.00 41.40 2484.00
33 13.37 White washing with lime to give an even shade:13.37.1 New work (three or more coats) Sq.M 40.00 16.20 648.00
34 13.41 Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade13.41.1 New work (two or more coats) over and including water thinnable priming coat
with cement primer.
Sq.M 60.00 89.70 5382.00
35 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade
[TOTAL VI]
FINISHING 13.0
Signature of EPIL
6 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 167
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 Sq.M. over and including
priming coat of exterior primer applied @ 2.20 kg/ 10 Sq.M).New work (Two or
more coats applied @ 1.43 ltr/ 10 Sq.M. over and including priming coat of
exterior primer applied @ 2.20 kg/ 10 Sq.M).
Sq.M 50.00 94.95 4747.50
36 13.50 Applying priming coat :13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel work (second coat)
Sq.M 3.00 14.65 43.95
37 13.61 Painting with synthetic enamel paint of approved brand and manufactrur to
given an even shade:13.61.1 Two or more coats on new work Sq.M 15.00 74.40 1116.00
53604.45
VIII
38 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c
cutting and making good the walls etc.a) 18.10.3 25 mm dia. nominal bore R.M 3.00 304.15 912.45
b) 18.10.6 50 mm dia. nominal bore R.M 3.00 527.20 1581.60
2494.05
IX
[TOTAL VIII]
WATER SUPPLY 18.0
[TOTAL VII]
DRAINAGE 19.0
Signature of EPIL
7 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 168
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
39 19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786
having minimum cross section as 23 mmx25mm and over all minimum length
263 mm and width as 165mm with minimum 112 mm space between protruded
legs having 2 mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138 mm as per
standard drawing and suitable to with stand the bend test and chemical
resistance test as per specifications and having manufacture's permanent
identification mark to be visible even after fixing, including fixing in manholes
with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) complete as per design.
Eah 25.00 311.60 7790.00
40 19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of
required shape and approved quality19.19.1 L D -2.5
19.19.1.1 Rectangular shape 600x450mm internal dimensions Each 3.00 1131.70 3395.10
11185.10
X WATER PROOFING 22.0
[TOTAL IX]
Signature of EPIL
8 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 169
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
41 22.1 Providing and laying integral cement based treatment for water proofing on
horizontal surface at all depth below ground level for under ground structures
as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22mm to
25mm thick approved and specified rough stone slab over a 25mm thick base
of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing
compound conforming to IS:2645 in the recommended proportion over the
leveling course (leveling course to be paid separately). Joints sealed and
grouted with cement slurry mixed with water proofing compound. ii) 2nd layer
of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water
proofing compound in recommended proportions. iii) Finishing top with stone
aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm
thoroughly embedded in the 2nd layer.
22.1.1 Using rough kota stone. Sq.M 130.00 1022.45 132918.50
42 22.2 Providing and laying integral cement based treatment for water proofing on the
vertical surface by fixing specified stone slab 22 mm to 25mm thick with
cement slurry mixed with water proofing compound conforming to IS:2645 in
recommended proportions with a gap of 20mm (minimum) between stone slabs
and the receiving surfaces and filling the gaps with neat cement slurry mixed
with water proofing compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement
punning mixed with water proofing compound in recommended proportion
complete at all levels and as directed by Engineer-in-charge :
22.2.1 Using rough Kota stone Sq.M 80.00 1243.25 99460.00
Signature of EPIL
9 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 170
S
NoDSR -2014 DESCRIPTION UNIT QTY
RATE
(in Rs)
AMOUNT
(in Rs)
43 22.7 Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces
etc consisting of following operations: a) Applying a slurry coat of neat cement
using 2.75 kg/sqm. of cement admixed with water proofing compound
conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab
including adjoining walls upto 300mm height including cleaning the surface
before treatment. b) Laying brick bats with mortar using broken bricks/brick
bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5
coarse sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge over 20 mm thick layer of cement mortar
of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the adjoining walls upto 300 mm height including
rounding of junctions of walls and slabs c) After two days of proper curing
applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed
with water proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement
mortar of mix
1:4 (1 cement :4 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge including laying
glass fibre cloth of approved quality in top layer of plaster and finally finishing
the surface with trowel with neat cement slurry and making pattern of 300x300
mm square 3mm deep. e) The whole terrace so finished shall be flooded with
water for a minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the Engineer-in-
Charge :22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm. Sq.M 25.00 1019.05 25476.25
[TOTAL XIII]257854.75
Signature of EPIL
10 / 10
PUMP ROOM & UGT BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 171
DSR 2012 NON-DSR
1 PUMP HOUSE EQUIPMENTS 1368070.00
Total C/F To Summary 1368070.00
GRAND TOTAL 1368070.00
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at Kalikiri,
Chittoor (A.P)
SUMMARY OF COST
PUMP ROOM & UNDER GROUND TANK
PLUMBING WORK
S.NO NAME OF SUB-HEADAMOUNT
Signature of EPIL
1 / 1
PUMP ROOM& UGT PLUMBING SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 172
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
APUMPS, PANELS AND RELATED PIPES & ACCESSORIES (WITHIN
PUMP ROOM)
Providing, fixing and testing in position ISI marked (IS : 1239) G.I pipes
(heavy class) manufactured from seamless pipes, in concealed or exposed
works complete with all necessary G.I fittings i.e. sockets, elbows, tees,
bends, unions, plugs and clamps including cutting chases and making good
the walls (on terrace the pipes shall be supported at suitable interval and
inside ducts these shall be properly clamped through duct walls). The
Galvanization shall conform to IS : 4736. The work shall include the painting
with two coats of anti-corrosive paints on buried and concealed pipe works
and with two coats enamel paint of approved quality and shade over a coat of
primer on exposed pipe works, complete as required by the Engg-in-charge
for proper completion of the work.
(Make : Jindal(Hissar) / Prakash Surya / Jotindra)
80mm nominal bore (wall thickness - 4.8 mm) 11 R.M. 1,263.00 13,893.00
100mm nominal bore (wall thickness - 5.4 mm) 6 R.M. 1,715.00 10,290.00
150mm nominal bore (wall thickness - 5.4 mm) 11 R.M. 2,560.00 28,160.00
1
BILL OF QUANTITIES
PLUMBING WORKS
Signature of EPIL
1 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 173
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
Providing and fixing in position M.S. / G.I. pipe one side flanged sleeves of
upto 600 mm long (heavy class) with M.S. puddle flange fabricated out of 6
mm thick MS plate in RCC walls of water tanks / retaining walls during the
time of casting the same including hot dipped galvanization after fabrication
and painting with two coats of anti corrosive paint over primer.
100 NB 3 Nos. 3,990.00 11,970.00
150 NB 1 Nos. 5,320.00 5,320.00
Providing and fixing in position M.S. / G.I. pipe both side flanged sleeves of
upto 600 mm long (heavy class) with M.S. puddle flange fabricated out of 6
mm thick MS plate in RCC walls of water tanks / retaining walls during the
time of casting the same including hot dipped galvanization after fabrication
and painting with two coats of anti corrosive paint over primer.
80 NB 1 Nos. 3,325.00 3,325.00
150 NB 1 Nos. 5,985.00 5,985.00
Providing and fixing in position M.S. / G.I. pipe one side screwed sleeves of
upto 600 mm long (heavy class) with M.S. puddle flange fabricated out of 6
mm thick MS plate in RCC walls of water tanks / retaining walls during the
time of casting the same including hot dipped galvanization after fabrication
and painting with two coats of anti corrosive paint over primer.
80 NB 3 Nos. 1,995.00 5,985.00
2
3
4
Signature of EPIL
2 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 174
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
Supply, installing, testing and commissioning of non clog submersible type
drainage / dewatering pump suitable for automatic operation, float valve
operated, automatic / manual operation, including NRV & all accessories, nlet
& outlet arrangements, required cable etc. complete in all respects. (Make :
Grundfos / ITT / WILO / DP / Nocchi / KSB)
3 lps at 10 meter, 10 mm max particle size, 50 Hz, 240 volts, IP 68, F
insulation, Float level switches, impeller in CI / Polypropylene, casing in CI /
polyurethan and shaft in stainless steel (1 set comprises of two number
dewatering pumps)
1 Set 1,33,000.00 1,33,000.00
Supply & fixing in position ISI marked cast iron double flanged butterfly
valves (PN 16) as per IS:13095, with SS disc, shaft, seating rings, internal
fastening, nuts, bolts including transporting to worksite, 3 mm thick rubber
gaskets etc. including testing, Complete as per drawings & directions of the
Engineer-in-charge.
(MAKE : Venus / IVC / SKS / Zoloto / Audco / Advance / CRI)
80 mm nominal dia2 Nos. 4,515.00 9,030.00
150 mm nominal dia2 Nos. 10,327.00 20,654.00
Providing & fixing cast iron body strainer made up of SS screen tested to a
min. pressure of 15 kg/sqcm complete with flanged ends as required. (make
: CIM / Zoloto / Audco / Advance)
150 mm nominal bore 1 Nos. 16,558.00 16,558.00
5
6
7
Signature of EPIL
3 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 175
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
Providing, fixing, testing and commissioning of three phase, 50 HZ, AC, PLC
based, vertical inline multi stage variable cum fixed speed hydropneumatic
pumping sets, in SS MOC (Impeller - SS 304, Shaft - 316), housing in cast
iron, enclosure class IP 55, Insulation F class, electrical control panel with
contactors, relays, circuit breakers, starters, branch ammeters, incoming
voltmeter, selector switches, equal load sharing, low level guard and other
protection as per manufacturers specifications complete with common base
frame, pressure gauge on the delivery side including non-return valve,
isolating valves on suction and delivering sides, suction and delivery headers,
pressure tanks bladder/diaphragm type with pre-pressurized air, complete in
all respects. The booster pumps shall consistes of 3 nos. hydropneumatic
pumps (1 variable speed and 2 fixed types in configuration of 2 pumps
working and 1 pump stand by). The Complete pumping system and panel
shall be assembled and tested at the pump manufacturer factory. Systems
assembled by the dealers locally will not be accepted.
(Make : Grundfos / WILO / ITT)
Discharge : 300 lpm (each) at 70 meter head, 2900 rpm, 415 volts, 50 HZ, 2 x
170 liters pressure tanks. 1 Set 8,64,500 8,64,500.00
8
Signature of EPIL
4 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 176
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
9 Providing, fixing, testing and commissioning of electrical control panel for
water supply pumps / equipments with magnetic type level controllers and
digital type level indicators. The panel will be suitable for automatic start-stop
arrangement of water supply pumps and other equipments as required. The
panel will have necessary indication & protection, Star delta starters for above
5 HP pumps & DOL Starters for upto 5 HP pumps, digital ammeter &
voltmeter with selector switches on incomer and ammeter with selector switch
on all outgoing feeders, phase indicating lights, pump ON / OFF lights, power
ON / OFF lights, switches for auto-manual operation of pumps, cyclic
convertor for alternate running of working and stand by pumps, overload
relays, single phasing preventor, dry suction cut off, necessary contactors
inclusive of SS level sensing probes to be installed in water reservoirs for the
proper completion of the system.
The system will include Digital type multi level indicator display system of
water levels for 2 nos water tanks / compartments.
The control panel will be floor / wall mounted type fabricated out of 14 SWG
CRCA MS sheet, IP 54 enclosure, duly powder coated of min. 60 micron
thickness of standard seimens grey shade over primer coats with 7 tank
treatment for degreasing, derusting, phosphatising & passivation complete.
The panel will be compartmentlized with front operation having Separate bus
bar and cable alley chamber, ventillation louvers, 415 V electrolitic Aluminium
Bus Bar, removable gland plates, cable glands, including connection with
outgoing feeders complete in all respect.
Signature of EPIL
5 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 177
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
The MCCB shall be Ics = 100% Icu, with rotary handle & pad locking
arrangement, with trip setting as per load requirement. TP MCCB shall be with
solid isolable neutral link. The breaking capacity specified is Ics value. The
MCCB shall be of thermo magnetic type. All outgoing MCB's shall be C type
with 10 KA breaking capacity.
The system is inclusive of suitable PVC insulated armoured multi core copper
control cable FRLS grade of required length with supporting arrangements for
the proper completion of the system.
The suitable size PVC / XLPE insulated armoured aluminium conductor
power cable from control panel to pumps will be included in above item along
with terminations, cable glands & cable trays etc as required. (Cable Make :
Universal / CCI / NICCO / Finolex / Polycab / Skytone)
The following pumps shall be controlled by the panel :
(a) One set of Hydropneumatic water transfer pump set control panel. (The
control panel of hydropneumatic pumps will be supplied by the pump
manufacturer) (To cut off pump when water level is low in suction tank)
(b) Two sets of tubewell submersible pumps (To cut off pump when water
level is high in delivery tank and start when delivery water tank level is low)
(c) One set of filter feed pump of water treatment unit. (To cut off pump when
water level is high in delivery tank and start when delivery water tank level is
low)
Signature of EPIL
6 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 178
SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)
(d) 1 nos. Dewatering Pump Control unit for two nos. single phase pumps, to
operate Pumps alternatively and in case of Excess inflow into the Sump, Both
Pumps Will Start Automatically With Audio, Visual & Alarm Including All
Standard Accessories Like Ammeter, Auto Manual switch, DOL Starter,
Indicating Lights, And Pumps On/ Off Lights, Protection MCB, Etc.
(Panel Make : Elegant / Aqua / Advance / Adlec / Ambit / Tricolite / Milestone /
Vidyut control / ASES (Agni Suraksha), Swithgear & accessories make : ABB
/ Schnieder / L&T / Seimens)
INCOMER : 125 AMP FP MCCB (25 KA)
BUS BAR : 200 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable
sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
OUT GOINGS :
1 no 63 AMP TP MCCB (25 KA) - for hydropneumatic pump set panel
2 no 16 AMP TP MCB (10KA) - for filter feed pumps
2 no 25 AMP TP MCB (10KA) - for tubewell pump
1 no 20 AMP DP MCB (10KA) - for dewatering pumps control unit
2 no 20 AMP TP MCB (10KA) - for spare
8 no 6 / 10 / 16 Amp DP MCB (10KA) - for Light / fan / spares 1 Set 2,39,400.00 2,39,400.00
13,68,070.00 TOTAL OF SUBHEAD A
Signature of EPIL
7 / 7
PUMP ROOM& UGT PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 179
S. NO DESCRIPTION DSR-2012 NON-DSR
I INTERNAL WIRING 24537.00 12806.50
II DISTRIBUTION BOARDS & MCB's 1276.30
III EARTHING SYSTEM 4279.49
IV MISCELLANEOUS 4381.00
V INTERNAL LIGHTING FIXTURES & FANS 642.40 6639.30
TOTAL 30735.19 23826.80
GRAND TOTAL
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at Kalikiri,
Chittoor (A.P)
SUMMARY OF COST
INTERNAL ELECTRICAL
PUMP ROOM & UNDERGROUND TANK
54561.99
Signature of EPIL
1 / 1
PUMP ROOM & UGT ELECT SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 180
S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount
SUB HEAD (I) :- INTERNAL WIRING (DSR)
Point wiring in PVC conduit, with piano type switch :-
Wiring for light point/fan point/exhaust fan point/call bell point
with 1.5 sqmm FR PVC insulated copper conductor single core cable
in surface / recessed PVC conduit, with piano type switch, phenolic
laminated sheet, suitable size M.S. box and earthing the point with 1.5
sqmm FR PVC insulated copper conductor single core cable etc. as
required.1.8.2 PT 5.00 543.00 2715.00
Power plug wiring in PVC conduit (2 x 4 sqmm.) :-1.12 Wiring for power plug with 2 x 4 sqmm. FR PVC insulated, copper
conductor single core cable in surface / recessed PVC conduit along
with 1 no 4 sqmm FR PVC insulated copper conductor single core cable
for loop earthing as required. M 1.00 162.00 162.00
Circuit / Sub main wiring in PVC conduit :-
Wiring for circuit / submain wiring alongwith earth wire with the
following sizes of PVC insulated, copper conductor single core cable in
surface/ recessed PVC conduit as required.1.14.10 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire M 14.00 597.00 8358.00
1.14.11 4 x 10 sq.mm. + 2 x 10 sq.mm. Earth wire M 14.00 883.00 12362.00
S/F light plug point piano type accessories :-1.29 Supply and fixing metal box of 150 mm x 75 mm x 60 mm deep
(nominal size) on surface or in recess with suitable size of phenolic
laminated sheet cover in front including providing and fixing 3 pin
5/6 amps socket outlet and 5/6 amps. piano type switch, connection,
painting etc. as required. Each 2.00 194.00 388.00
S/F power plug point piano type accessories :-
4
5
BILL OF QUANTITIES
ELECTRICAL WORKS
1
2
3
Signature of EPIL
1 / 6
PUMP ROOM & UGT ELCT. BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 181
S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount
1.30 Supply and fixing metal box of 180 mm x 100 mm x 60 mm deep
(nominal size) on surface or in recess with suitable size of phenolic
laminated sheet cover in the front including providing and fixing 6 pin
5/6 & 15/16 amps socket outlet and 15/16 amp piano type switch,
connection, painting etc as required.Each 2.00 276.00 552.00
TOTALSUB HEAD (I) (DSR) 24537.00
SUB HEAD (I) :- INTERNAL WIRING (NON DSR)1 Supply all materials, receiving, storing, handling, fixing, laying, wiring and testing
for power outlets using ISI marked (IS:694) single core, flexible, flame
retardant low smoke (FRLS), stranded copper conductors PVC insulated 1100
Volt grade wiring in concealed/ exposed system using 20/25 mm ERW black
stove enamelled screwed type, ISI marked rigid steel conduit of wall thickness
16 SWG conforming to IS 9537 part II including all conduit accessories, such as
bends, tees, draw boxes, MS point control boxes with zinc plating and yellow
passivation, together with wiring accessories such as white modular plate type
switches and sockets, cover plate, grid plate etc. including submain wiring
from DB to outlet with Cu earth continuity wire, conduit being laid in recess
(concealed) either in ceiling slab / wall, chasing on surface or under false ceiling
including required clamping arrangement and required length of MS flexible
conduit or in wooden partitions etc. complete as required at site.
a 20 amp SPN industrial metal clad outlet in MS box with 20 amp C series MCB and
metal plug top instead of modular switch & sockets by 2x6 + 4 sq mm copper
wires. 2 NOS 5812.00 11624.00
b 3 pin 16 amp shuttered socket outlet connected to AC switch by 2x4 + 2.5 sq
mm copper wires. (A C socket outlet provided outside at about 2500 mm height).
The AC switch will be provided under separate item as below.1 NOS 1182.50 1182.50
TOTAL SUB HEAD (I) NON DSR 12806.50
SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series,
miniature circuit breaker (MCB)suitable for inductive load of
following poles in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
2.52.1 single pole Each 1.00 125.00 125.00
2.52.3 single pole and neutral Each 323.20
2.52.4 triple pole and neutral Each 1.00 667.50 667.50
5
1
Signature of EPIL
2 / 6
PUMP ROOM & UGT ELCT. BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 182
S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount
2 2.53 Supplying & fixing single pole, blanking plate in the existing MCB DB
complete etc. as required. Each 1.00 2.50 2.50
Supplying and fixing following rating, double pole, 240 volts, isolator in the
existing MCB DB complete with connections, testing and commissioning
etc. as required.
2.54.1 40 amps. Each 1.00 220.70 220.70
2.54.2 63 amps. Each 1.00 260.60 260.60
Supplying and fixing following way, single pole and neutral, sheet
steel, SP MCB distribution board consumer unit , 240 volts, on
surface / recess, complete with tinned copper busbar, neutral busbar,
earth bar, din bar,hinged front acrylic cover for the MCB knobs,
detachable gland plate, interconnections, phosphatized and powder
painted including earthing etc. as required. (But without MCB / RCCB /
Isolator) 2.32.3 2 + 12 way SPN Each 1001.50
Supplying and fixing following way, three pole and neutral, sheet steel, TP MCB
distribution board, 415 volts,on surface /recess, complete with tinned
copper busbar, neutral busbar, earth bar, din bar, detachable gland plate,
interconnections, phosphatized and powder painted including earthing etc. as
required (But without MCB / RCCB / Isolators).
2.33.4 4 way (4 + 12), Double door, horizontal type Each R.O 1743.60
TOTAL SUB HEAD (II) DSR 1276.30
3
4
5
Signature of EPIL
3 / 6
PUMP ROOM & UGT ELCT. BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 183
S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount
SUB HEAD (III) :- EARTHING SYSTEM
1 3.5 Earthing with GI earth plate 600mm x 600 mm x 6mm thick including
accessories and providing masonary enclosure with cover plate having
locking arrangement and watering pipe etc. (but without charcoal or
coke and salt ) complete as required. Set 1.00 2108.00 2108.00
2 3.7 Extra for using salt and charcoal for G.I. or copper plate earth
electrode as required. Set 1.00 801.99 801.99
3 3.12 Supplying and laying 6 SWG G.I. wire at 0.50 M. below ground level
for conductor earth electrode, including soldering etc as required.M 10.00 79.80 798.00
4 3.15 Providing and laying earth connections from earth electrode with 6
SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as
required. M 5.00 114.30 571.50
TOTAL SUB HEAD (III) DSR 4279.49
Signature of EPIL
4 / 6
PUMP ROOM & UGT ELCT. BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 184
S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount
SUB HEAD (IV) :- MISCELLANEOUS
1 Providing, Laying and jointing of Spigot & socket type RCC NP-3
pipes suitable for rubber ring joints including rings, testing of joints
etc. for cable laying along roads, under road crossings or for entry into
the building as required.MR 150 mm dia. M 2.00 352.45 704.90
2 Providing, Laying 150 mm thick PCC 1:2:4 (1 cement : 2 coarse sand :
4 stone aggregate) all round RCC pipes for cable laying. The PCC shall
be cured as required. MR 150 mm diameter RCC Pipe CUM 1.00 3676.10 3676.10
TOTAL SUB HEAD (IV) NON DSR 4381.00
Signature of EPIL
5 / 6
PUMP ROOM & UGT ELCT. BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 185
S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount
SUB HEAD (V) :- INTERNAL LIGHTING FIXTURES & FANS
SUPPLY OF LIGHTING FIXTURES
Supply of wall / ceiling surface mounted fluorescent tube light
luminaires with all accessories as per standard item ballasts, starters,
capacitor, control gear box, including required nos. fluorescent tube etc
complete as required as per the standard catalogue item.
MR 1 x 18 watt Slimlite plus (Philips TMS 500/118) Nos 2.00 774.00 1548.00
MR 1 x 36 watt Slimlite (Philips TMS 500/136) Nos 2.00 945.65 1891.30
SUPPLY OF CEILING & EXHAUST FANS
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down
rod, blades, 2 nos. caps etc. complete (Make : Bajaj / Crompton)
1400 mm sweep
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing
nuts, bolts, mounting frame and other accessories etc. complete
(Make : Bajaj / Crompton Khaitan)MR 300 mm sweep 1400 rpm Nos 2.00 1600.00 3200.00
TOTAL SUB HEAD (V) NON DSR 6639.30
ERECTION OF LIGHTING FIXTURES AND FANS
1 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes
containing upto two GLS lamps per fitting, complete with all accessories
including connections etc. as required. Each 2.00 25.20 50.40
2 1.52 Installation of exhaust fan upto 450 mm sweep in the existing
opening, including making the hole to suit the size of the above fan,
making good the damage, connections, testing, commissioning etc. as
required. Each 2.00 296.00 592.00
TOTAL SUB HEAD (V) DSR 642.40
1
1
2
Signature of EPIL
6 / 6
PUMP ROOM & UGT ELCT. BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 186
S.
NO. DESCRIPTION DSR 2012 NON DSR
1 LT PANEL, FEEDER PILLARS AND CAPACITOR PANELS 1727543.00
2 CABLE & ACCESSARY 142606.10 1976434.00
3 MISCELLANEOUS 111996.00
4 EARTHING & LIGHTNING PROTECTION 551949.50
5 TWO POLE STRUCTURE 829920.00
6 D.G. 2467830.00
7 EXTERNAL LIGHTING SYSTEM 2411193.00
ELECTRICAL SUBSTATION 1875650.80 139827.48
TOTAL 2018256.90 10216692.98
GRAND TOTAL
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at
Kalikiri, Chittoor (A.P)
SUMMARY OF COST
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
12234949.88
Signature of EPIL
1 / 1
EXT. ELECT. & LIGHTING SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 187
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
1 Main L.T. Panel
Suppy , installation, testing, Design, manufacture, supply inspection, handling,
assembling, affecting proper connections, testing and commissioning of 14 SWG
CRCA sheet steel fabricated cubical type Main L.T. Panel with PLC based load
manager, floor mounting, dust & vermin proof, front operated construction,
enclosure class - IP 52, powder coated after proper treatment with 9 tank process
with top/bottom removable gland plates, as required, double compression type
cable glands, earth bus, hinged and lockable doors to achieve dust and vermin
proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS
copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500
volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders
shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable
or Aluminium Bus Duct as required.
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based
Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit
protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have
Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be
supplied with adopter terminal connection whose orientation can be changed at site.
All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO
+ 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
All incoming & outgoing MCCB's shall be microprocessor based with O/L & S/C and
E/F protection.
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Signature of EPIL
1 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 188
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall
be with heavy duty solid isolable neutral link.
The breaking capacity specified for all ACB's and MCCB's breakers is Ics value
(service rating).
The instrument chamber shall be separate and shall comprise of flush type
ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate
CT's shall be provided for protective and measuring system and for APFCR of
capacitor bank with suitable VA.
All Energy Analyser / TVM Shall have RS 485 Modbus RTU on board
Communication protocol for SCADA communication.
The fault withstanding capacity of panel & its control gear shall be min. 35 KA rms
for 1 sec.
GA drawings shall be got approved from Owners / Architects / Consultants
before fabrication.The panel has to be specifically fabricated as per the
space available at basement level. The existing column positions will also be
considered.
ACB Make and model :- ABB E-max, L&T-U Power Omega, Schneider - Master
Pact - NW, Siemens - 3WL, Legrand-DMX3
MCCB Make and model :- ABB - T-max, L&T - D sine, Schneider - Compact NS /
NSX, Siemens - 3VL, Legrand-DPX
INCOMERS from 1 Nos. 400 KVA Transformers
Signature of EPIL
2 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 189
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
1 no. 630 AMP. Four Pole, Electrically operated 3 position motorized (220 V
AC) drawout type Air Circuit Breaker with all inbuilt protections, with
microprocessor based release, over current, earth fault, short circuit, Instantaneous
short circuit, closing coil (220 V AC), trip coil (24 V DC), shunt trip release with LCD
/ LED display for event history & measurement of current parameters, 35 KA
Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC
contacts, cradle, handle, safety shutter in confirmity with IS:60947
ACB and Release Make / model :- ABB E-max (PR122), L&T-U Power Omega
(MTX 2.5G), Schneider - Master Pact -NW (Micrologic 6.0A), Siemens - 3WL
(ETU45B), Legrand - DMX3 (MP4-LSIG)
The ACB shall be electrically interlocked with the bus coupler, DG incomers and
other transformer incomers.
1 nos. 200 amp TP MCCB (35 KA) for Fire Fighting Pump Panel. (For one
transformer incomer only)
Protection releases / relays, Metering & Accessories for each Transformer
incomers
Over Voltage / Under Voltage relay / release with timer.
Backup earth fault relay.
Restricted earth fault relay.
Master trip relay.
Trip Circuit Supervison relay.
TNC switch.
Signature of EPIL
3 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 190
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Auto manual selector switch.
1 nos. 0-500 volt range digital type voltmeter with selector switch
1 set of 3 CT's of ratio 630/5A, Class 1.0 accuracy 15 VA burden for metering.
1 set of 3 CT's of ratio 630/5A, Class 1.0 accuracy 15 VA burden for APFCR.
1 set - 415 / √3 / 110 / √3 Class 1.0 accuracy 100 VA burden PT along with primary
and secondary fuse.
1 set of 4 CT's of ratio 630/1A, Class PS for protection.
1 no. CT's of ratio 630/5A, Class 5P20 for protection.
1 no. 0-630 Amp range digital type ammeter with selector switch.
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM
6400 of Conzerve or equi.) with RS 485 communication port for communication /
report generation.
Power factor meter.
Frequency meter.
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along
with hooter, auxillary relay, 2 sets of push buttons.
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF /
TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB.
INCOMERS from 2 Nos. 125 KVA D G sets
Signature of EPIL
4 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 191
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
2 nos. 400 AMP. Four Pole, Electrically operated motorized MCCB.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with microprocessor based adjustable O/L & S/C, E/F & reverse power relay with
trip setting as per load requirement. . The breaking capacity specified is Ics value.
The instrument chamber shall be separate and shall comprise of flush type
ammeter, voltmeter, selector switches, CT's, PT's, etc
The MCCB shall be electrically interlocked with the bus coupler and Transformer
incomers.
BUS COUPLER
2 nos. 400 AMP. Four Pole, Electrically operated motorized MCCB.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with microprocessor based adjustable O/L & S/C, E/F & reverse power relay with
trip setting as per load requirement. . The breaking capacity specified is Ics value.
The instrument chamber shall be separate and shall comprise of flush type
ammeter, voltmeter, selector switches, CT's, PT's, etc
BUS BARS
1 sections of 630 AMP & 1 sections of 400 AMP, 415 Volts, 3 phase 50 HZ TPN
high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC
supports, with colour coading and insulated by heat shrinkable sleeves and clip on
shrouds for joints. The current density of bus bar shall be minimum 1.00 sq mm /
amp.
Signature of EPIL
5 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 192
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above design ambient
temperature of 50 deg C.
CHANGE OVER SWITCH
1 nos. 200 Amp four pole On Load Change Over switch for Fire Pump feeder.
PLC for load management / automation
Design, manufacturing, testing at works, supply of PLC BASED , AUTOLOAD
TRANSFER, AUTOLOAD BALANCING PANEL FOR 2 nos.125 KVA D.G. sets
complete as required to acheive the desired functions. (Make : ALLEN BRADLEY /
SIEMENS / MITSUBISHI / ABB)
PLC shall be provided in main LT panel for interlocking between different incomers
and bus couplers to avoid unintentional paralleling of different supplies.
PLC is not envisazed for D G synchronization
In addition to required hardware and software following components shall also be
provided.
Based on the load requirement only required no. of DG sets shall be operated.
Monitoring of DG set safeties (mechanical as well as electrical).
PLC Hardware as required
Auxiliary relays/contactor/metering/protection etc as required
Signature of EPIL
6 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 193
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
230 V AC, UPS of suitable rating
Annunciators as required
One no. Battery charger set consisting of Transformer / Rectifier, DC ammeter, DC
voltmeter, Charging rate selector switch, Off/Trickle/boost.
All control wiring from PLC to various feeders with min. of 2.5 sq mm copper FRLS
cable.
The PLC provided for Load Management & for interlocking of Breakers shall
perform to achieve the system as described in given Main Schemetic
Diagram.
OUTGOINGS -
All outgoing feeders shall be provided with one set of phase indication lamps and trip
indication lamps with protection fuses/MCB and ammeter with selector switch with
suitable ratio CT's of accuracy class 1.0
20 nos. outgoing feeders shall be provided with electronic dual reading KWHR
meter with RS 485 communication port, CT's with accuracy class 1, control circuits
and wiring as per SLD.
MCCB Make and model :- ABB - T-max, L&T - D sine, Schneider - Compact NS /
NSX, Siemens - 3VL, Legrand-DPX
5 nos. 200 AMPS TP MCCB. (35 KA)
9 nos. 100 AMPS TP MCCB. (35 KA)
6 nos. 63 AMPS TP MCCB. (35 KA) 1 Set 9,71,400 9,71,400
Signature of EPIL
7 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 194
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
2AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR
PANEL)
Supply , Installation, Testing commissioning, Design, manufacture, supply,
inspection, handling, assembling, affecting proper connections, testing and
commissioning of 14 SWG CRCA sheet steel fabricated cubical type 100 KVAR A
P F C Panel consisting of 5 / 10 / 15 / 20 / 25 / 50 KVAR capacitor units in tier
formation, housed in an integrated cubicle type automatic switching ON and OFF
control panel, floor mounting, dust & vermin proof, front operated construction,
enclosure class - IP 52, powder coated after proper treatment with 9 tank process
with top/bottom removable gland plates, as required, double compression type
cable glands, earth bus, hinged and lockable doors to achieve dust and vermin
proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper
wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3
phase 50 Hz TPN, electrolytic aluminium as per IS 8623 .
All outgoings MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C
release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall
be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics
value. The instrument chamber shall be separate and shall comprise of flush type
ammeter, voltmeter, selector switches, CT's, PT's, etc
Capacitor duty contactors should be used for switching individual capacitor banks.
The fault withstanding capacity of panel & its control gear shall be min. 35 KA rms
for 1 sec.
Signature of EPIL
8 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 195
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
The capacitor panel shall be integrated with the main L T Panel as per schematic
diagram.
INCOMING
Incomer circuit breaker has been included in the main panel.
1 set- 3 CTs , ratio 200/5A Class 1.0 accuracy 15 VA burden for metering.
1Nos- (0-200A) digital Ameter with selector switch
Micro processor based automatic power factor control relay (including power
factor meter) in 8 steps for automatic cut off or add on capacitor units to keep the
power factor at 0.95 with variation of loads. All associated auxiliary contactors /
relays shall be provided with in the scope of work.
Phase indicating lamps with HRC fuses, and indicating in each capacitor chamber
unit to indicate On/Off status of capacitor unit.
BUS BARS
200 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium
bus bar of suitable length, SMC / DMC supports, with colour coding and insulated by
heat shrinkable sleeves and clips on shrouds for joints. The current density of bus
bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above ambient temperature.
OUTGOINGS -
Signature of EPIL
9 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 196
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
2 nos. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 25
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop push
button for manual operation including on/off indicating lamps and delay timer
complete.
1 no. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 20
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop push
button for manual operation including on/off indicating lamps and delay timer
complete.
1 no. of 40 AMPS TPN 35 KA MCCB and 50 amps AC3 duty contactor with 15
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop push
button for manual operation including on/off indicating lamps and delay timer
complete.
1 no. of 32 AMPS TPN 35 KA MCCB and 40 amps AC3 duty contactor with 10
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop push
button for manual operation including on/off indicating lamps and delay timer
complete.
1 no. of 16 AMPS TPN 35 KA MCCB and 20 amps AC3 duty contactor with 5
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop push
button for manual operation including on/off indicating lamps and delay timer
complete.
1 Set 63,779 63,779.00
3 L T Breaker (near Transformer)
Signature of EPIL
10 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 197
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Supply, testing and commissioning of 630 AMP. Four Pole, Manually
operated 3 position fixed type Air Circuit Breaker with all builtin protections, with
microprocessor based releases/relays, over current, earth fault, short circuit,
Instantaneous over current, closing coil (220 V AC), trip coil (24 V DC), 50 KA
Breaking Capaciy with all standard accessories i.e. auxillary switch, protection CT's
with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:13947-
2. The ACB will be provided with digital type ammeter with selector switch and CT's,
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC
fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons, 4 Nos. LED type
indicating lamp for indicating the status of feeder - ON / OFF / TRIP due to over
current, TRIP due to earth fault. Each lamp shall be with bakup HRC fuse/MCB.
ACB and Release Make / model :- ABB E-max (PR121), L&T-U Power (MTX
1.0G), Schneider - Master Pact - MVS (Micrologic 6.0G), Siemens - 3WT
(ETU45B), Legrand - DMX3 (MP4-LSIG)
The ACB will be provised inside outdoor type enclosure of suitable size made out
of CRCA M.S. sheet 2 mm thick (14 SWG) with locking arrangement (IP-54),
powder coated after proper treatment with 9 tank process, duly fixed on MS angle
iron frame work of size 50mm x 50mm x 6mm, 90 cm long legs out of which 45 cm
duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm),
The sheet steel shall undergo minimum 9 tank treatment followed by finishing
powder coating of min 60 micron thickness.
1 Sets 1,59,600.00 1,59,600.00
Signature of EPIL
11 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 198
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
4 Design, manufacture, supply, testing and commissioning of Common
Services Panel - 01 / 02 / 03 / 04 fabricated out of 16 SWG CRCA sheet steel,
IP52, wall / floor mounting type. The sheet steel shall undergo minimum 9 tank
treatment followed by finishing powder coating of min 60 micron thickness. the
board includes 415 V electrolitic Aluminium Bus Bar, removable gland plates, cable
glands, including connection with outgoing feeders complete in all respect.
The incoming MCCB shall be thermal-magnetic based with inbuilt O/L & S/C
release with E/F protection and all Outgoings MCCB's shall be thermal-magnetic
based with inbuilt O/L & S/C release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall
be with solid isolable neutral link. The breaking capacity specified is Ics value. All
outgoing MCB's shall be C type with 10 KA breaking capacity.
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at
Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
INCOMER : 100 AMP FP MCCB (25 KA)
BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable
sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
Signature of EPIL
12 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 199
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above ambient temperature.
OUT GOINGS :
5 no 63 AMP FP MCB (10 KA)2 SET 75,545 1,51,090.00
5 Design, manufacture, supply, testing and commissioning of Common
Services Panel - 05 fabricated out of 16 SWG CRCA sheet steel, IP52, wall / floor
mounting type. The sheet steel shall undergo minimum 9 tank treatment followed by
finishing powder coating of min 60 micron thickness. the board includes 415 V
electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including
connection with outgoing feeders complete in all respect.
The incoming MCCB shall be thermal-magnetic based with inbuilt O/L & S/C
release with E/F protection and all Outgoings MCCB's shall be thermal-magnetic
based with inbuilt O/L & S/C release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall
be with solid isolable neutral link. The breaking capacity specified is Ics value. All
outgoing MCB's shall be C type with 10 KA breaking capacity.
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at
Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
Signature of EPIL
13 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 200
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
INCOMER : 63 AMP FP MCCB (25 KA)
BUS BAR : 100 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable
sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above ambient temperature.
OUT GOINGS :
3 no 40 AMP DP MCB (10KA)1 SET 26,334 26,334.00
6 Design, manufacture, supply, testing and commissioning of External
Lighting Panel - 01 / 02 / 03 fabricated out of 16 SWG CRCA sheet steel, IP52,
wall / floor mounting type. The sheet steel shall undergo minimum 9 tank treatment
followed by finishing powder coating of min 60 micron thickness. the board includes
415 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands,
including connection with outgoing feeders complete in all respect.
The incoming MCCB shall be thermal-magnetic based with inbuilt O/L & S/C
release with E/F protection and all Outgoings MCCB's shall be thermal-magnetic
based with inbuilt O/L & S/C release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall
be with solid isolable neutral link. The breaking capacity specified is Ics value. All
outgoing MCB's shall be C type with 10 KA breaking capacity.
Signature of EPIL
14 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 201
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at
Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
INCOMER : 100 AMP FP MCCB (25 KA)
BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable
sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above ambient temperature.
OUT GOINGS :
10 no 63 AMP FP MCB (10 KA)
5 no 40 AMP DP MCB (10 KA)2 SET 88,135 1,76,270.00
Metering Panels
7 Design, manufacture, supply, testing and commissioning of Metering
Panels - 01 / 02 / 03 / 04 / 05 Main / Sub Distribution Board cum meter panel
fabricated out of 14 / 16 SWG CRCA sheet steel, IP52, wall / floor mounting type.
The sheet steel shall undergo minimum 9 tank treatment followed by finishing
powder coating of min 60 micron thickness. the board includes 415 V electrolitic
Aluminium Bus Bar, removable gland plates, cable glands, including connection with
outgoing feeders complete in all respect.
Signature of EPIL
15 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 202
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
The Distribution board shall have space suitable for housing 1 phase / 3 phase
electronic type KWHR meters and MCB's as required consisting of compartments
of suitable sizes each of 16 SWG MS sheet steel fabricated, dust & vermin proof
with hinged and lockable doors for following meters.(KWHR meters shall be
supplied by the local electric supply authority / under seperate item)
For 4 nos. 3 phase KWHR meters
The incoming MCCB shall be thermal-magnetic based with inbuilt O/L & S/C
release with E/F protection and all Outgoings MCCB's shall be thermal-magnetic
based with inbuilt O/L & S/C release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,
with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall
be with solid isolable neutral link. The breaking capacity specified is Ics value. All
outgoing MCB's shall be C type with 10 KA breaking capacity.
The above board shall be complete with 3 nos. phase indicating lights, flush
mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at
Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.
Various Metering Panel Shown Below
a) Type - A
INCOMER : 100 AMP FP MCCB (25 KA)
Signature of EPIL
16 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 203
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
BUS BAR : 100 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable
sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above ambient temperature.
OUT GOINGS :
5 nos 63 AMP FP MCB (10 KA)2 SET 34,473 68,946
b) Type - B
INCOMER : 63 AMP FP MCCB (25 KA)
BUS BAR : 100 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable
sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.
The temperature rise should be restricted to 35 deg C above ambient temperature.
OUT GOINGS :
3 nos 40 AMP FP MCB (10 KA)1 SET 26,334 26,334
Electronic Energy Meters and Revenue Collection System
Signature of EPIL
17 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 204
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
8 Supply, installation, testing and commissioning of 3 phase, 4 wire, 50 Hz, dual
register, pre paid type electronic energy meters (As per IS : 15884 - 2010) and
revenue collection system with key pad technology along with home display /
freedom units having LCD display, lithium battery with inbuilt facility of tripping and
resetting of over loading in case of D G power at preset level, provision of change of
tarrif as per customer's requirements and as per manufacturers specifications. The
Meter should have inbuild disconnect switches as per BIS requirement with over load
and low balance alarm facility. The cost will also include common meter reading
instrument. The meter should be capable for full or partial backup,. For freedom
units the 3 pair flat telephone cable shall run from meter to each unit.
The system will include Supply, installation, testing and commissioning of DG
sensing switch mode power supply unit with discrimination receivers for sensing of
DG (SMPS and necessary lengths of PVC insulated armoured copper conductor
2x2.5 sq mm control wiring for DG power registration in electronic meters. The
control wiring shall run between D G panel to each block seperately. The control
wiring shall be connected to each meter. OR, Supply, installation, testing and
commissioning of mains sensing power line carrier based source discrimination
receivers of sensing of mains of suitable MVA rating. (LINE INJECTOR)
The system will include necessary vending software and data base designing, one
set of Intel Core 2 Duo level or higher PC with 1 GB RAM and 500 GB HDD of
HP/Dell/Samsung make with laser printer and token printer with serial port, UPS of
500 VA with 20 minute back up complete in all respects for full functioning of system
and ready for collection of revenues. The charges will include for necessary training
of vending system to operator and customers. (Meter & system Make : Secure-
Liberty) .
6 sets 13,965.00 83,790.00
Signature of EPIL
18 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 205
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
TOTAL 17,27,543.00
8 Laying and testing of aluminium conductor cable PVC / XLPE insulated armoured,
served, sheathed 1100 volts grade. On surface the cable run shall be fixed by GI
clamps etc. of suitable size or on existing cable tray or inside pipe complete in all
respect .The armouring of the cable shall be properly connected with the earth
conductor including fixing of palm or pin type copper tin plated cable socket (lug) /
end terminations to the cable leads, insulating with tape and making connections
with brass / nickle plated double cmpression gland, providing cable tags complete in
all respect including supply of clamps, lugs, tape, tags and compression glands etc
complete upto the satisfaction of BSF. (The supply of terminations and glands shall
be under seperate item)
16 sqmm 4 core 50 M 33.20 1,660.00
240 sqmm 3 1/2 core 60 M 99.70 5,982.00
300 sqmm 3 1/2 core 60 M 99.70 5,982.00
9 Laying and testing of aluminium conductor cable PVC / XLPE insulated armoured,
served, sheathed 1100 volts grade at 750 mm below ground level over a cushion
of 75 mm thick fine river sand alround & protected with brick on sides & top including
excavation & back filling. The armouring of the cable shall be properly connected
with the earth conductor including fixing of palm or pin type copper tin plated cable
socket (lug) / end terminations to the cable leads, insulating with tape and making
connections with brass / nickle plated compression gland, providing cable tags
complete in all respect including supply of sand, bricks, clamps, lugs, tape, tags and
compression glands etc complete upto the satisfaction of BSF.(The supply of
terminations and glands shall be under seperate item)
CABLES
Signature of EPIL
19 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 206
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
10 sqmm 4 core 60 M 79.80 4,788.00
16 sqmm 4 core 4,100 M 99.70 4,08,770.00
25 sqmm 4 core 150 M 99.70 14,955.00
70 sqmm 4 core 130 M 133.00 17,290.00
35 sqmm 3 1/2 core 60 M 99.70 5,982.00
50 sqmm 3 1/2 core 80 M 106.00 8,480.00
70 sqmm 3 1/2 core 70 M 119.00 8,330.00
95 sqmm 3 1/2 core 800 M 133.00 1,06,400.00
120 sqmm 3 1/2 core 1,600 M 159.00 2,54,400.00
150 sqmm 3 1/2 core 70 M 159.00 11,130.00
185 sqmm 3 1/2 core 70 M 172.00 12,040.00
240 sqmm 3 1/2 core 600 M 199.00 1,19,400.00
300 sqmm 3 1/2 core 1,600 M 199.00 3,18,400.00
TOTAL 9,390 13,03,989.00
10
Supply fixing of plam or pin type copper tin plated cable socket (lug) to the
cable leads, insulating with tape and making connections etc. complete in all
respects as per direction of BSF.
504 10 sq.mm.20 NOS 15.00 300.00
504 16 sq.mm.170 NOS 18.60 3,162.00
504 25 sq.mm.8 NOS 26.60 212.80
504 35 sq.mm.15 NOS 29.20 438.00
504 50 sq.mm.5 NOS 54.50 272.50
Signature of EPIL
20 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 207
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
504 70 sq.mm.11 NOS 81.00 891.00
504 95 sq.mm.14 NOS 113.00 1,582.00
504 120 sq.mm.30 NOS 148.00 4,440.00
504 150 sq.mm.45 NOS 192.00 8,640.00
504 185 sq.mm.13 NOS 260.60 3,387.80
504 240 sq.mm.40 NOS 372.00 14,880.00
504 300 sq.mm.135 NOS 545.00 73,575.00
11 Supply and fixing brass nickle plated compression glands for PVC insulated
armoured, served, sheathed cable including rubber ring etc. complete in all
respect. The armouring of the cable shall be properly connected with the earth
conductor.
50316 sqmm 4 core
30 NOS 83.00 2,490.00
50325 sqmm 4 core
5 NOS 94.00 470.00
50370 sqmm 4 core
5 NOS 167.00 835.00
50335 sqmm 3 1/2 core
5 NOS 129.00 645.00
50350 sqmm 3 1/2 core
5 NOS 139.00 695.00
50370 sqmm 3 1/2 core
5 NOS 139.00 695.00
50395 sqmm 3 1/2 core
5 NOS 167.00 835.00
503120 sqmm 3 1/2 core
5 NOS 167.00 835.00
503150 sqmm 3 1/2 core
10 NOS 210.00 2,100.00
503185 sqmm 3 1/2 core
5 NOS 260.00 1,300.00
503240 sqmm 3 1/2 core
13 NOS 305.00 3,965.00
503300 sqmm 3 1/2 core
40 NOS 399.00 15,960.00
Signature of EPIL
21 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 208
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
TOTAL 1,42,606.10
12 Supply of 3 core stranded aluminium conductor 11 KV grade XLPE (E) (Cross
linked Polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured
cable confirming to IS : 7098 (part II with latest amendments)
240 sq. mm 3 core 135 M 1,715.00 2,31,525.00
13 Laying and testing of 3 core stranded aluminium conductor XLPE insulated
armoured cable 11 KV grade, at a depth of 900 mm below ground level over a
cushion of 100 mm thick fine river sand alround and protected with well burnt bricks
on sides and on top put across or on surface fixed on GI clamps or on cable trey or
inside pipe etc as required including the supply of sand, bricks and clamps etc. The
armouring of the cable shall be properly connected with earth conductor by clamps
etc.
240 sq. mm 3 core 170 M 212.00 36,040.00
14 Supply and making heat shrinkable type Indoor end termination Kit of 11 KV
XLPE cable.
240 sq. mm 3 core 2 Set 13,699.00 27,398.00
15 Supply and making heat shrinkable type Outdoor end termination Kit of 11 KV
XLPE cable.
240 sq. mm 3 core 2 Set 20,216.00 40,432.00
CABLE TRAY
Signature of EPIL
22 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 209
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
16 Supply and erection of Perforated type cable trays made out of prefabricated
Galvanized sheet steel including tees, bends, crossings, reducers, couplings to be
laid in cable trenches, over head on wall or hanged from ceiling including all
neccessary supports, brackets, grouting, levelling, suspention and fixing
arrangements, dash fastners, G.I. nuts & bolts complete in all respects.
750 mm (W) X 50 mm (H) X 2 mm (T)
30 M 1,995.00 59,850.00
600 mm (W) X 50 mm (H) X 2 mm (T) (Verticle run in shaft)
70 M 1,662.00 1,16,340.00
450 mm (W) X 50 mm (H) X 2 mm (T) 30 M 1,330.00 39,900.00
300 mm (W) X 35 mm (H) X 1.5 mm (T)
70 M 997.00 69,790.00
150 mm (W) X 35 mm (H) X 1.5 mm (T) (for LV services)
70 M 731.00 51,170.00
TOTAL 6,72,445.00
MISCELLANEOUS ITEMS
17 Providing and fixing M.V. danger notice plate of 200 mm x 150 mm made of mild
steel, 2 mm thick and vitreous enamelled painting white on both sides, and with
inscription in single red colour on front side as required .
2 NOS 425.00 850.00
18 Providing and fixing H.V. danger notice plate of 250 mm x 200 mm made of mild
steel, 2 mm thick and vitreous enamelled painting white on both sides, and with
inscription in single red colour on front side as required .
2 NOS 598.00 1,196.00
Signature of EPIL
23 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 210
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
19 S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass
and supported from back with hard board with supply of all material labour T & P etc
for proper completion of work. (Approx front area = 1.20 sq M)
2 NOS 984.00 1,968.00
20 Supply and fixing of First aid box as approved by Indian red cross conforming to IS
: 2217.2 NOS 997.00 1,994.00
21 Supply of rubber gloves of 11 KV grade as per IS : 4770.
2 Set 532.00 1,064.00
22 Supply, laying, jointing, testing and commissioning of ISI marked (IS : 14930, part
2) H.D.P.E. (DWC) Double wall Corrugated pipe for cable laying having
corrugation on outer wall and plain smooth surface at inner side including
transportation upto the site, jointing, providing and fixing all fittings i.e. sockets,
couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter
depth of suitable width with back filling of soil into trenches to complete the works in
all respects.
104 mm. ID / 120 mm OD 170 M 352.00 59,840.00
23 Supply and fixing of cable route maker
4 NOS 399.00 1,596.00
24 Supplying and laying of 1000 mm wide x 12 mm thick chequered rubber matting of
tested quality to withstand 15KV dielectric strength as per IS 5424 complete in all
respects.
13 M 2,048.00 26,624.00
25 Supplying, Fixing, Testing, Commissioning of 1800 mm x 900 mm x 20 mm thick
chequered rubber matting of tested quality to withstand 11 KV dielectric strength
complete in all respects.4 NOS 4,216.00 16,864.00
TOTAL 1,11,996.00
Signature of EPIL
24 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 211
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
G.I. EARTHING
26
Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing
with its top at least 3 meters below ground level complete with 20 mm G.I. pipe for
watering funnel, 300 mm square C.I. frame with hinged cover, masonry housing,
alternate layers of coke and salt at least 150 mm thick alround including excavation
and back filling etc. complete in all respects.
13 NOS 6,556.00 85,228.00
27 Providing & fixing 20mm x 3mm G.I. strip on surface, in recess or in ground
including connections etc. as required . 135 M 66.50 8,977.50
28 Providing & fixing 25mm x 5mm G.I. strip on surface, in recess or in ground
including connections etc. as required.(Common Services & Nornal Metering
Panels )135 M 109.00 14,715.00
29 Providing & fixing 32mm x 6mm G.I. strip on surface, in recess or in ground
including connections etc. as required (Pig tail Transformers, DG sets, LT panels).
35 M 176.00 6,160.00
30 Providing & fixing 50mm x 6mm G.I. strip on surface, in recess or in ground
including connections etc. as required (equipment earth grid).
30 M 239.00 7,170.00
31 Providing & fixing 50mm x 10 mm G.I. strip on surface, in recess or in ground
including connections etc. as required.(Main earth Grid & Intrconnecting earth loop)
30 M 372.00 11,160.00
COPPER EARTHING
Signature of EPIL
25 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 212
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
32
Supply & burrying of 600mm x 600mm x 6 mm copper plate, vertically for
earthing with its top at least 3 meters below ground level complete with 20 mm G.I.
pipe for watering funnel, 300 mm square C.I. frame with hinged cover, masonry
housing, alternate layers of coke and salt at least 150 mm thick alround including
excavation and back filling etc. complete in all respects.
3 NOS 13,433.00 40,299.00
Providing & fixing 32mm x 6mm insulated Copper strip on surface, in recess or in
ground including connections etc. as required.
40 M 811.00 32,440.00
ADVANCE LIGHTNING PROTECTION
33 Providing, fixing, testing and commissioning of High pulsar voltage OPR 60 Early
streamer emmission (ESE) Advance Lightning Protection system with 5 meter
high Pulsar 60 having 97 meter protection radius complies with NFC-17-102
standards. The Air terminal should be capable to collect the ambient electric field
and to should emit the upward streamer with the defined Gain in time. The
installation should be strictly followed as per manufacturers instructions. The system
should include the following items complete in all respects.
GI pipe fabrication support structure providing with suitable base plate, should have
provision for Guy wire clamping system, termination arrangement for the Down-
Conductor
GI pipe fabrication support structure providing with suitable base plate, should have
provision for Guy wire clamping system, termination arrangement for the Down-
Conductor
2 sets of 25 x 3 mm copper strip or 2 sets of 25 x 5 mm G. I. stripdown conductor
of suitable length as per building height with suitable mounting accessorries. The
mounting clamps should be conductive material.
Signature of EPIL
26 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 213
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
2 sets of maintenance free Earth enhancing Chemical compound type safe earthing
with copper bonded steel rod with minimum 1.80 mts long and suitable termination
clamps.
1 Job 3,45,800.00 3,45,800.00
TOTAL 5,51,949.50
11 KV Compact Switch gear (RMU) Main near Two Pole strusture)
34 Providing, Fixing, testing and Commissioning of 11 KV, 630 amp, 18.4 KA Indoor
compact switchgear as per following details -
(a) Supply of 3 Way 11kV , 3Phase, 50Hz, 3 wire , earthed neutral, outdoor type floor
mounted, non extensible, having hinged arc proof cable doors, breaking capacity
18.4 kA, SF6 / VCB Ring Main Unit enclosed in robotically laser welded stainless
steel tank having IP67 degree of protection consisting of following:-
(i) 3 Nos. 630Amps tee off spring assisted type vacuum/SF6 circuit breaker unit
with self powered series trip microprocessor based numerical over current and
Earth fault relay for protection, fitted with fixed type voltage indicator device as per
IEC 61958 and ring core type protection Current transformer along with LV
compartment with Ammeter with selector switches.
1 SET 7,98,000.00 7,98,000.00
35 TRANSFORMER (11 KV / 0.4 KV) (400 KVA)
Signature of EPIL
27 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 214
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Supply, storing, inspection, handling, assembling, installing in correct aligned position
effecting proper connections, testing & commissioning of Outdoor mounted type
11 KV / 433 Volt Transfomer (as per ECBC norms & as per IS : 2026, P1 to P5),
3 phase, 4.5% impedance , Dyn 11 vector group, 50 cycles, (ONAN) oil immersed
naturally cooled, step down, copper wound, continuous duty, temperature rise
above 50oC in oil by thermometer 45
oC, in winding by resistance 50
oC and other
standard accessories as required including followings :
a) Cable Termination box with disconnecting facility for 11 KV 3C-240 sq mm XLPE
cable at 11 KV side
b) Cable Termination box with disconnecting facility for required nos. LT cable at LT
side.
c) Off Load Tap Changer on HV side + 7.5 % to - 7.5 % @ 2.5 % in manual mode
with position indicator and locking arrangements.
d) Unidirectional rollers.
e) Oil Conservator with filter cap, drain plug & oil level gauge
f) Earthing terminals 2 nos for body earthing.
g) 0.415 KV neutral seperately bought out on a bushing for neutral earthing.
h) Pressure release device. Double diaphragm explosion vent.
i) Radiators Detachable type with top & bottom shut off valve.
j) First filling of filtered dehydrated oil as per IS : 335 including make up fill during
installation.
Signature of EPIL
28 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 215
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
k) Silica gel breather with connecting pipe & oil seal.
l) Rating, Diagram & Terminal marking plate of SS.
m) Sampling Valves for filteration, drainage and filling with plugs.
n) Air release plugs.
o) Thermometer pocket with plug.
p) Lifting Lugs.
q) Buchholz relay with gas release cock, alarm & shut off valve with separate set of
contacts for trip and alarm.
r) 150 mm Winding temperature indicator (WTI) with alarm.
s) 150 mm Oil temperature indicator (OTI) with alarm
t) Marshalling Box.
u) Clamping device.
v) Jacking Pads.
The work shall be complete in all respects up to the satisfaction of BSF.
400 KVA 1 set 8,29,920.00 8,29,920.00
TOTAL 8,29,920.00
DIESEL GENERATING SET
Signature of EPIL
29 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 216
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
36 Supply, Fixing, testing and Commissioning of Silent type Diesel Generating Set at
0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel
operation / PLC based load management, 0.85 load factor including sound proof
acoustic and weather proof enclosure, residential type silencer (as per CPCB
norms) fabricated out of CRCA sheet of 14 / 16 SWG thickness with min. 9 tank
pretreated before powder coating with ventillation system complete in all respects
comprising of the following.(Testing of DG sets should be done as per specified at
Technical specification).
Diesel Engine -
Diesel Engine suitable for driving alternator of above rating, compression ignition, 4
stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable
for above output of alternator at 40oC, 50% RH & at 1000 M MSL and confirming to
BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after
12 hrs of continuous loading, complete with all the accessories i.e. tachometer with
hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting
rods, electronic governing system, dynamically balanced flywheel, air intake
manifold, Air cleaner, anti vibration pads, starter motor, including all other
accessories required to complete the system.
Instrument Panel - Engine mounted Instrument Panel fitted with and having digital
display for followings :
Start stop switch with key
Water temperature indication
Lubrication oil pressure indication.
Signature of EPIL
30 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 217
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Lubrication oil temperature indication.
Battery charging indication
RPM indication
Over speed indication
Low Lube oil trip indication
Engine hours indication
Alternator -
Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles,
4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 1000 meter
above MSL, capable of taking 10% overlioading for one hour after 12 hrs of
continuous loading, brushless, self excited, self regulated through AVR, continuous
duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H
insulation, including terminal box suitable for cable termination as required.
Base Frame - Both the engine and alternator shall be mounted on suitable base
frame made of MS channel which shall be installed on cement concrete foundation
and vibration isolating arrangement as per recommendations of manufacturer.
Inbuilt Fuel tank of standard capacity complete with inlet and outlet connections, oil
indication gauge, drain plug, air breather, fuel transfer system for automatic fuel
refilling system with pump, piping, valves, level indicators etc. complete.
Signature of EPIL
31 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 218
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Exhaust System - Exhaust manifold with silencer complete with mineral wool / rock
wool insulation of minimum 50 mm thick of 150 Kg per cu M density on all sides,
with chicken mesh wrapping and 26 SWG aluminium sheet cladding complete as
required.
The D G set should be supplied with required hardware for external PLC based auto
load management system.
Starting system - 24 Volt DC starting system comprising of starter motors :
voltage regulator and arrangement for initial excitation complete with 12/24 Volts
suitable nos. lead acid type batteries of suitable AH.
Ventillation System - Arrangement for fresh air intake for cooling of the engine &
alternator, extraction, discharging hot air into the atmosphere as per standard
specifications.
125 KVA 2 SET 12,00,000 24,00,000.00
37 Supply, Fixing, testing and Commissioning of Exhaust gas piping system of Class
`B' MS pipe for upto 150 mm dia and for 200 mm dia & above MS pipe as per
IS:3589 with welded joints, cut to required lengths with necessary bends, fittings,
expansion joints of suitable diameter including providing hot dip galvanized
supporting / clamping arrangements at suitable intervals, anti vibration mounting,
with mineral wool / rock wool insulation of 50 mm thick of 150 Kg per cu M density
on all sides of exhaust pipe, with chicken mesh wrapping and 26 SWG aluminium
sheet cladding complete as required. The aluminum foil should be tightly cladded to
insulation surface of pipe. The aluminum cladding shall be lock with sheet metal
screws with other sections of aluminium foil. The measurement shall be done
longitudnally with any extra allownce for bends beyond centre line of bend. (Stack
height should be in accordance with emission regulations of CPCB, which will go
well above the top most terrace)
Signature of EPIL
32 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 219
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
200 mm dia (wall thickness - 5.0 mm) 10 M 4,655.00 46,550.00
100 mm dia (wall thickness - 4.5 mm) 10 M 2,128.00 21,280.00
TOTAL 24,67,830.00
39 Supply of Octagonal Poles of 10 M height with 200 mm / 175 mm bottom A/F &
70 mm top A/F (across face) made up of 3mm thick HT sheet along with
galvanized base plate of size 290x290x16mm / 275x275x16mm suitable to
withstand max wind speed of 169 KM/hr and suitable for mounting decorative
double / single arm bracket with street lights. The internal and external surface of
poles shall be hot dip galvanized to 70 micron DFT. The pole will have a weather
proof camouflaged junction box at 500 mm ht. with flush cover for cable termination
block & earth stud with washer & nuts etc i/c provision for supporting cable of size up
to 2 Nos. of 4c x 35 sqmm i/c Supply of 4 nos. M24 X 750 mm long 'J' type EN 8
grade foundation bolts with nuts and washers, 63 Amp terminal block suitable for up
to 4 c x 35 Sq.mm Aluminium conductor cable. The Pole should be complete with all
required accessories to complete the work as directed by Engg-in-charge. (Make :
Bajaj / Schreder / Philips)
3 set 28,196.00 84,588.00
EXTERNAL LIGHTING SYSTEM
Signature of EPIL
33 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 220
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
48 Erection of 6 meter high street light pole with single / double arm brackets with
luminaires including providing and casting in position 'M20' grade reinforced cement
concrete pole foundation of size 550mm (L) X 550mm (W) and 1200 mm (D) i/c
excavation of earth in all kind of soils including providing, cutting, bending and
placing in position, reinforcement of cold twisted main vertical bars of 12mm dia - 8
nos. and reinforcement ring of cold twisted bar of 8mm dia - with 190mm spacing,
i/c fixing of J bolts, terminal block, MCB's etc i/c providing & placing 63 / 75mm
(I.D.) DWC, HPDE Pipe of suitable length for cable entry & exit as required to
complete the work as per the satisfaction of Engg-in-Charge.
108 job 9,975.00 10,77,300.00
49 Supplying, drawing, connecting and testing of following size of PVC insulated FRLS
copper conductor (as per IS : 694) flexible multicore wire in the existing poles and
bracket from cable termination connector / MCB to the fitting i/c providing suitable
copper lugs connections etc. as reqd.
3 core 2.5 sq.mm (for 10 Mtr Poles) 5 job 1,330.00 6,650.00
3 core 2.5 sq.mm (for 9 Mtr Poles) 80 job 1,197.00 95,760.00
3 core 2.5 sq.mm (for 8 Mtr Poles) 3 job 1,064.00 3,192.00
3 core 2.5 sq.mm (for 7 Mtr Poles) 3 job 931.00 2,793.00
3 core 2.5 sq.mm (for 6 Mtr Poles) 3 job 798.00 2,394.00
SUPPLY OF EXTERNAL LIGHTING SYSTEM
Signature of EPIL
34 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 221
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
Supply of factory wired HPSV street light luminaire with pressure die cast
aluminium housing, POT optics reflector, heat resistant toughened glass cover,
protection class as per model, complete with integral control gear box including
SON-T lamp, ballast, capacitor etc complete in all respects as per the standard
catalogue item.
1X150 watt HPSV (Philips - SGP 401 / SON -T 150) Esplanade IP-65 108 Nos 5490.00 5,92,920.00
Supply of factory wired Metal Halide / CDM-T street light luminaire with pressure
die cast aluminium housing, POT optics reflector, heat resistant toughened glass
cover, protection class as per model, complete with integral control gear box
including MH / CDM-T lamp, ballast, capacitor etc complete in all respects as per
the standard catalogue item.
1X250 watt MH (Philips - SGP 338/HPI-T 250) Velocity IP-66 3 Nos 18,633.00 55,899.00
53 Installation, testing and commissioning of CFL / HPSV / MH / CDMT type post top
lantern with required lamps complete with, control gears, ballast, capacitor etc.
including connection with 3x1.5 sqmm flexible fire retardant copper connecting wire
of required length complete as required.
- Nos 532.00 -
54 Installation, testing and commissioning of HPSV type street light fixture on steel
pole with required lamps, control gear box, ballast, capacitor, including connection
with 3x2.5 sqmm flexible fire retardant copper connecting wire of required length
complete as required.
108 Nos 931.00 1,00,548.00
51
52
ERECTION OF EXTERNAL LIGHTING FIXTURES
Signature of EPIL
35 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 222
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
55 Installation, testing and commissioning of Metal Halide / CDMT type street light
fixture on steel pole with required lamps, control gear box, ballast, capacitor,
including connection with 3x2.5 sqmm flexible fire retardant copper connecting wire
of required length complete as required.
3 Nos 931.00 2,793.00
S/F of GI pipe (Class `B' - IS:1239) pole suitable for fixing of post top lantern
including IP 65, thermo plastic / 1.6 mmm tk Galvanized sheet steel cable junction
box of suitable size with terminals, knock outs for cable entry, glands etc complete
including Masonry work in cement concrete (1:2:4) for erecting the pole and ISI
marked 3x1.5 sqmm flexible fire retardant (FRLS) copper wire from cable box to
lamp for connections including two coat painting of the pole by an approved shade of
enamel paint on primer coat and necessary reducers & nipple on the top of pole for
fixing of post top lantern including supply & fixing of 63 mm dia PVC pipe of required
length & size for underground cable entry and exit upto the junction box, base plate
etc. The work shall be complete as required up to the satisfaction of Engg-in-charge.
50 mm dia. 3.2 m long
(2.4 m aboveground and 0.8 m below ground)18 Nos 4,655.00 83,790.00
65 mm dia. 3.2 m long
(2.4 m aboveground and 0.8 m below ground)13 Nos 5,320.00 69,160.00
65 mm dia. 4.0 m long
(3 m aboveground and 1 m below ground)18 Nos 5,985.00 1,07,730.00
80 mm dia. 4.5 m long
(3.5 m aboveground and 1 m below ground)18 Nos 6,982.00 1,25,676.00
56
Signature of EPIL
36 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 223
S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT
BILL OF QUANTITIES
EXTERNAL ELECTRICAL & LIGHTING SYSTEM
TOTAL 24,11,193
GRAND TOTAL 102,19,472
Signature of EPIL
37 / 37
ELECTRICAL ESTIMATE
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 224
S.NO. DESCRIPTION D.S.R AMOUNT NON-DSR AMOUNT
I CIVIL WORKS 1361928.75 18680.00
II INTERNAL PLUMBING WORK 198469.15 33878.92
III INTERNAL ELECTRICAL WORK 315252.90 87268.56
TOTAL 1875650.80 139827.48
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at
Kalikiri, Chittoor (A.P)
ELECTRICAL SUB-STATION BUILDING
SUMMARY OF COST
Signature of EPIL
1 / 1
ESS BUILDING SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 225
DSR 2012 NON-DSR
I EARTH WORK 31186.75
II CONCRETE WORK 62864.20
III REINFORCED CEMENT CONCRETE 560324.50
IV BRICK WORK 376535.70
V WOOD WORK 32661.25
VI STEEL WORK 52348.65
VII FLOORING 125129.45
VIII ROOFING 3271.50
IX FINISHING 103020.75
X ROADS 14586.00
XI NON SCHEDULE ITEMS 18680.00
TOTAL 1361928.75 18680.00
Proposed construction of external development & bulk services (civil & electrical works) for ITBP
at Kalikiri, Chittoor (A.P)
SUMMARY OF COST
S.NO NAME OF SUB-HEADAMOUNT
CIVIL WORK
ELECTRICAL SUB-STATION BUILDING
Signature of EPIL
1 / 1
ESS CIVIL SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 226
I
1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil. Cu.M 70.00 70.00 130.80 9156.00
2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming
and watering, lead up to 50 m and lift upto 1.5 m.
Cu.M 140.00 140.00 83.80 11732.00
2.27 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming,
consolidating and dressing complete.
Cu.M 10.00 10.00 749.30 7493.00
2.28 Surface dressing of the ground including removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.2.28.1 All kinds of soil. 100 Sq.M 3.00 3.00 935.25 2805.75
[TOTAL I] 31186.75
II
3 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level :4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cu.M 13.00 13.00 3593.30 46712.90
4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)
including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,
string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills,
fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering
and finishing :4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cu.M 1.00 1.00 5272.40 5272.40
4.2.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Cu.M 1.00 1.00 4781.40 4781.40
QTYAMOUNT
(in Rs)
EARTH WORK 2.0
CONCRETE WORK 4.0
BILL OF QUANTITIES
ELECTRICAL SUB STATION
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
Signature of EPIL
1 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 227
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6
graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40
mm nominal size, well rammed and consolidated and grouted with fine sand including
finishing the top smooth
Sq.M 18.00 18.00 338.75 6097.50
[TOTAL II] 62864.20
III
5 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
(a) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sq.M 18.00 18.00 166.90 3004.20
(b) 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sq.M 50.00 50.00 311.20 15560.00
(c) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sq.M 100.00 100.00 262.25 26225.00
(d) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sq.M 50.00 50.00 365.60 18280.00
5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string
courses, bands, copings, bed plates, anchor blocks and the like.
Sq.M 4.00 4.00 166.90 667.60
5.9.16 Edges of slabs and breaks in floors and walls.
5.9.16.1 Under 20 cm wide R.M. 35.00 35.00 99.45 3480.75
5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sq.M 6.00 6.00 411.10 2466.60
5.11 Extra for additional height in centering, shuttering where ever required with adequate
bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a
height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be
measured)5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Sq.M 135.00 135.00 121.65 16422.75
6 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars. Kg 1500.00 1500.00 62.25 93375.00
7 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars. Kg 2800.00 2800.00 62.25 174300.00
8 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. R.M. 8.00 8.00 22.25 178.00
REINFORCED CEMENT CONCRETE 5.0
Signature of EPIL
2 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 228
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
9 5.33 Providing and laying in position machine batched and machine mixed design mix M-25
grade cement concrete for reinforced cement concrete work, using cement content as per
approved design mix, including pumping of concrete to site of laying but excluding the cost
of centering, shuttering, finishing and reinforcement, including admixtures in recommended
proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability
without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used
as per design mix is payable/recoverable separately).(a) 5.33.1 All works upto plinth level. Cu.M 14.00 14.00 5242.15 73390.10
(b) 5.33.2 All works above plinth level upto floor V level. Cu.M 23.00 23.00 5781.50 132974.50
TOTAL [III] 560324.50
IV
10 6.34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 33.00 33.00 6006.20 198204.60
11 6.34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 18.00 18.00 6006.20 108111.60
12 6.34 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) Sq.M. 130.00 130.00 476.85 61990.50
13 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course
of half brick masonry.
Sq.M. 130.00 130.00 63.30 8229.00
TOTAL [IV] 376535.70
V
9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-
decorative type, core of block board construction with frame of 1st class hard wood and well
matched commercial 3 ply venerring with vertical grains or cross bands and face veneers on
both faces of shutters:9.21.1-9.15.1 35 mm thick without using ISI marked Stainless Steel butt hinges. Sq.M 3.00 3.00 1533.65 4600.95
Rate = 1578.30-44.65 = 1533.65
BRICK WORK 6.0
WOOD WORK 9.0
Signature of EPIL
3 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 229
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
14 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,
square or round bars etc. including priming coat with approved steel primer all complete
9.48.1 Fixed to steel windows by welding. Kg 230.00 230.00 90.75 20872.50
9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary
screws etc. complete :9.56.2 100x75x3.50 mm Each 13.00 13.00 30.70 399.10
9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with
necessary screws etc. complete :9.63.3 150x10 mm Each 3.00 3.00 35.80 107.40
9.64 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS :
7534 with necessary screws bolts, nut and washers etc. complete.
Each 3.00 3.00 60.15 180.45
9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with
necessary screws etc. complete :9.66.1 125 mm Each 5.00 5.00 23.75 118.75
9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade
with nuts and screws etc. complete :9.96.2 250x16 mm Each 3.00 3.00 168.95 506.85
9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less
than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with
necessary screws etc. complete :9.97.1 300x10 mm Each 3.00 3.00 100.40 301.20
9.97.3 200x10 mm Each 3.00 3.00 71.05 213.15
9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with
necessary screws etc. complete :9.100.1 125 mm Each 5.00 5.00 62.50 312.50
9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
and shade with necessary screws etc. complete.9.101.1 Single rubber stopper Each 3.00 3.00 28.60 85.80
Signature of EPIL
4 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 230
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness
of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined
with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame
profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket
weather seal to be provided through out the frame. The door frame to be fixed to the wall
using M.S. screws of 65/100mm size, complete as per manufacturers specification and
direction of Engineer-in-Charge.
R.M. 3.00 3.00 404.60 1213.80
9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for
top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size
30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered
in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of
which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form
top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm
shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided
both side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as
gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted
in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm
wide PVC sheet beading on inner side, and joined together with solvent cement adhesive.
An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the
'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-
charge. Manufacturer’s specification & drawing.
9.120.1 30 mm thick plain PVC door shutters. R.M. 1.50 1.50 2499.20 3748.80
TOTAL [V] 32661.25
VI STEEL WORK 10.0
Signature of EPIL
5 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 231
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
16 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths,
interlocked together through their entire length and jointed together at the end by end
locks, mounted on specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured
from high tensile steel wire of adequate strength conforming to IS: 4454 – part 1 and M.S.
top cover of required thickness for rolling shutters.10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. Sq.M 5.00 5.00 1840.85 9204.25
17 10.7 Providing and fixing ball bearing for rolling shutters. Each 2.00 2.00 429.85 859.70
18 10.9 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead
of laths as per design approved by Engineer-in-charge.(area of grill to be measured).
Sq.M 2.00 2.00 261.35 522.70
19 10.14 Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from
commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead
and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60
mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S.
pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers
as specified and applying a coat of approved steel primer after pre-treatment of the surface
as directed by Engineer-in-charge:10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb. R.M 80.00 80.00 346.75 27740.00
10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc. as
required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 180.00 180.00 77.90 14022.00
TOTAL [VI] 52348.65
VII
11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm
thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement
hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, .hardening
compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This
includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
Sq.M 40 40.00 420.50 16820.00
FLOORING 11.0
Signature of EPIL
6 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 232
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with
neat cement slurry mixed with pigment to match the shade of tiles including rubbing and
cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse
sand).11.20.2 Medium shade using 50% white cement 50% Grey cement. Sq.M 10.00 10.00 789.55 7895.50
21 mr mADANAPALLI slab flooring over 20 mm (average) thick base laid over and jointed with
grey cement slurry mixed with pigment to match the shade of the slab including rubbing
and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick. Sq.M 45.00 45.00 1364.00 61380.00
22 mr Madanapalli slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement
slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing
complete.
Sq.M 15.00 15.00 1364.00 20460.00
11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. R.M. 5.00 5.00 52.45 262.25
11.32 Extra for madanapalli stone/ sand stone in treads of steps and risers using single length up
to 1.05 metre .
Sq.M 3.00 3.00 12.10 36.30
11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness
to be specified by the manufacturer ) of approved make in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,
risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse
sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white
cement mixed with pigment of matching shade complete.
Sq.M 7.00 7.00 724.25 5069.75
11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by
the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such
as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement
: 4 Coarse sand) including pointing the joints with white cement and matching pigment etc.,
complete.
Sq.M 3.00 3.00 764.55 2293.65
mr Providing and laying madanapalli floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of
approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement
: 4 coarse sand) including grouting the joints with white cement and matching pigments
etc., complete.Size of Tile 600x600 mm Sq.M 8.00 8.00 1364.00 10912.00
[TOTAL VII] 125129.45
Signature of EPIL
7 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 233
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
VIII
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement :
3 fine sand) as per standard design :12.21.1 In 75x75mm deep chase R.M. 30.00 30.00 109.05 3271.50
[TOTAL VIII] 3271.50
IX
23 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.1 1:4 (1 cement: 4 fine sand) Sq.M 15.00 15.00 143.35 2150.25
13.2.2 1:6 (1 cement: 6 fine sand) Sq.M 180.00 180.00 130.20 23436.00
24 13.4 12 mm cement plaster of mix :
13.4.1 1:4 (1 cement: 4 coarse sand) Sq.M 190.00 190.00 132.10 25099.00
13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
cement on the rough side of single or half brick wall.
Sq.M 8.00 8.00 196.75 1574.00
25 13.16 6 mm cement plaster of mix :
13.16.1 1:3 (1 cement: 3 fine sand) Sq.M 60.00 60.00 101.00 6060.00
13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete
Sq.M 190.00 190.00 83.80 15922.00
13.37 White washing with lime to give an even shade:
13.37.1 New work (three or more coats) Sq.M 40.00 40.00 11.75 470.00
26 13.41 Distempering with oil bound washable distemper of approved brand and manufacture to
give an even shade13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement
primer.
Sq.M 180.00 180.00 66.70 12006.00
28 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of
required shade13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat
of exterior primer applied @ 2.20 kg/ 10 sqm).
Sq.M 180.00 180.00 80.45 14481.00
29 13.50 Applying priming coat :
13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on
steel galvanised iron/steel works
Sq.M 10.00 10.00 20.70 207.00
ROOFING 12.0
FINISHING 13.0
Signature of EPIL
8 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 234
QTYAMOUNT
(in Rs)
S
NoDSR -2012 DESCRIPTION
ELECTRI
CAL SUB UNIT
RATE
(in Rs)
30 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even
shade :13.61.1 Two or more coats on new work. Sq.M 30.00 30.00 53.85 1615.50
[TOTAL IX] 103020.75
X
16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm
including strengthening with 2mm dia wire or nuts, bolts and washers as required complete
as per the direction of Engineer-in-charge.16.70.1 Made of G.I. wire of dia 4mm. Sq.M 30.00 30.00 486.20 14586.00
[TOTAL X] 14586.00
XI
1 N.S - 1 MS BOX TUBULAR SECTION
Providing and fixing factory made shutters with M.S. box tubular section 75x30x1.25mm
thick in windows and ventilators Side/Top/Centre Hung joints mitred and flash butt welded
to pressed steel frames of windows. (Glass beading & wire gauge to be measured
seperately).
Kg 130.00 130.00 96.00 12480.00
N.S - 2 Providing & fixing Float Glass 4mm thick (10Kg / Sqm) with steel beading of approved
shape & section with screws in pressed steel door, window & CSW's Frames/Shutter & M.S.
Tubular section shutters of doors & windows.
Sq.M 10.00 10.00 620.00 6200.00
18680.00
ROADS 16.0
[TOTAL XI]
NON SCHEDULE ITEMS
Signature of EPIL
9 / 9
ESS CIVIL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 235
DSR 2012 NON-DSR
1 SANITARY FIXTURES 3317.30 18643.25
2 TOILET REQUISIES 1127.00 3812.00
3 SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS 68436.75 4347.22
4 WATER SUPPLY PIPES AND FITTINGS 21822.90 7076.45
5 EXTERNAL SEWERAGE SYSTEM 103765.20
Total C/F To Summary 198469.15 33878.92
GRAND TOTAL 232348.07
Proposed construction of external development & bulk services (civil & electrical works) for ITBP at Kalikiri,
Chittoor (A.P)
SUMMARY OF COST
ELECTRICAL SUB-STATION BUILDING
INTERNAL PLUMBING WORK
S.NO NAME OF SUB-HEADAMOUNT
Signature of EPIL
1 / 1
ESS PLUMBING SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 236
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
I
1 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low
level white P.V.C. flushing cistern with manually controlled device (handle
lever), conforming to IS : 7231, with all fittings and fixtures complete including
cutting and making good the walls and floors wherever required. each 1.00 3,317.30 3317.30
TOTAL SUB HEAD (I) (DSR) 3317.30
2 17.7.1 Providing white viterous china Wash Basin size 550 x 450 mm with C.P.
brass pillar tap of an approved design and make, CI/MS brackets, 32 mm
C.P. brass waste of standard pattern, standard quality P.V.C. waste pipe.
(Parryware C0418 & Jaquar 021 or equivalent)each 1.00 2331.15 2331.15
3 17.4.1 Providing white vitreous china ISI marked half stall Urinal size 590 mm x
400 mm x 380 mm with C.P. spreader, C.P. brass waste and C.P.brass
bottle trap, brackets etc. (Parryware magnum C0575, C8095, Jaquar 773
or equivalent) each 1.00 3326.10 3326.10
4 MR Providing flushing valve for urinals complete with installation box, control
cock, batteries (Jaquar 51087 or equivalent) each 1.00 11209.00 11209.00
5 MR Providing 32 mm dia. C.P.Brass bottle trap with 190 mm long wall
connection pipe in place of P.V.C. waste pipe for wash basin discharge.
(Jaquar 773 or equivalent) each 1.00 865.00 865.00
6 MR Providing 40 mm dia. C.P.Brass bottle trap with 190 mm long wall
connection pipe in place of P.V.C. waste pipe for Sink discharge (Jaquar
777 or equivalent) each 1.00 912.00 912.00
BILL OF QUANTITIES
PLUMBING WORKS
SUB HEAD (I) :- SANITARY FIXTURES (DSR ITEMS)
SUB HEAD (I) :- SANITARY FIXTURES (NON DSR ITEMS)
Signature of EPIL
1 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 237
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
TOTAL SUB HEAD (II) (NON-DSR) 18643.25
II
1 17.31 Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of
approved quality) complete with 6mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete. each 1.00 793.00 793.00
2 17.34.2 Providing & fixing viterous china toilet paper holder. each 1.00 334.00 334.00
TOTAL SUB HEAD (II) (DSR) 1127.00
3 MR Providing and fixing of 450 mm long C. P. brass towel rail complete with C.P.
brass brackets each 1.00 417.00 554.00
4 MR Providing white vitreous china urinal partition for half stall urinals.
(Parryware C0571 or equivalent) each 2.00 1629.00 3258.00
TOTAL SUB HEAD (II) (NON-DSR) 3812.00
III
The following items include providing, fixing and testing in position of ISI marked
(IS : 3989) centrifugally cast spun iron soil, waste, vent and rain water
pipes and fittings cut to required lengths, fixing at wall, ceiling or on floor
including connections to all required fittings complete in all respects.
Providing & fixing pipes.
17.35.1.2 100mm dia Centrifugally cast (spun) iron S & S Pipe metre 30.00 917.75 27532.50
17.35.2.2 75mm dia Centrifugally cast (spun) iron S & S Pipe metre 15.00 791.30 11869.50
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS
(Centrifugally Cast Spun Iron) (DSR'2012)
1
SUB HEAD (II) :- TOILET REQUISIES (DSR'2012)
SUB HEAD (II) :- TOILET REQUISIES (NON-DSR)
Signature of EPIL
2 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 238
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron
pipes & fittings of diameters.17.58.1 100 mm each 10.00 243.75 2437.50
17.58.2 75 mm each 5.00 205.30 1026.50
Providing & fixing M. S. holder - bat clamps of approved design to sand Cast
iron/cast iron (spun) pipe embedded in & including cement concrete blocks
10*10*10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size). Including cost of cutting holes&making good the walls etc.
17.37.1 For 100 mm dia pipe each 10.00 152.90 1529.00
Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast
iron screwed down or hinged grating with or without vent arm complete, including
cost of cutting & making good the walls and floors.
17.60.2.1 100 mm inlet & 75 mm outlet each 8.00 1020.90 8167.20
Providing & fixing Sand Cast iron S & S coller
17.57.1.2 100 mm dia each 7.00 318.35 2228.45
17.57.2.2 75 mm dia each 4.00 219.75 879.00
Providing & fixing sand cast iron S & S bend of required degree with access
door insertion rubber washer 3 mm thick, bolts & nuts complete .
17.38.1.2 100 mm dia each 4.00 385.70 1542.80
Providing & fixing heel rest sand cast iron S & S sanitary Bend.
17.40.1.2 100 mm dia each 4.00 371.75 1487.00
Providing & fixing plain sand cast iron S & S Bend of required degree.
17.39.1.2 100 mm dia each 4.00 335.75 1343.00
Providing & fixing single equal plain sand cast iron S&S junction of required
degree with access door, insertion rubber washer 3 mm thick bolts & nuts
complete.
17.43.1.2 100 * 100 * 100 mm each 4.00 623.80 2495.20
6
7
8
9
2
3
4
5
Signature of EPIL
3 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 239
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
10 17.47.1.2 Providing & fixing single unequal 100*100*75 mm sand cast iron S & S junction
of required degree with access door,insertion rubber washers 3mm thick,
bolts&nuts complete. each 4.00 792.20 3168.80
Providing & fixing of sand cast iron S & S terminal guard .
17.56.1.2 100 mm dia each 6.00 434.50 2607.00
12 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
diameter and weighing not less than 440 grams. each 3.00 41.10 123.30
TOTAL SUB HEAD (III) (DSR'2012) 68436.75
13 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over
floor traps. each 3.00 103.74 311.22
Providing and fixing in position G.I. medium class (IS:1239) waste pipes with all
necessary specials complete with cutting and chasing walls and floors etc. and
making good the same including painting the pipes with two coats of anti-
corrosive paint. The pipe run in toilet floor shall be covered be covered in and
around 75 mm thick 1:2:4 concrete.
MR 32mm nominal bore metre 5.00 364.40 1822.00
MR 40mm nominal bore metre 5.00 442.80 2214.00
TOTAL SUB HEAD (III) (NON-DSR) 4347.22
IV
Providing, fixing G. I. pipes complete with G. I. fittings and clamps including
cutting and making good the walls etc. (internal work) - (Exposed on wall)18.10.1 15mm dia nominal bore metre 12.00 215.10 2581.20
18.10.2 20mm dia nominal bore metre 5.00 249.30 1246.50
14
SUB HEAD (IV) :- WATER SUPPLY PIPES AND FITTINGS (DSR'2012)
1.
11
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS
(Centrifugally Cast Spun Iron) (NON DSR'2012)
Signature of EPIL
4 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 240
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
Providing, fixing G. I. pipes complete with G. I. fittings and clamps including
cutting and making good the walls etc (internal work) - Concealed pipe
including painting with anti corrosive bitumastic paint, cutting chases and making
good the wall.
18.11.1 15mm dia nominal bore metre 8.00 306.05 2448.40
18.11.2 20mm dia nominal bore metre 4.00 333.85 1335.40
Painting G. I. pipes and fittings with synthetic enamel white paint over a ready
mixed priming coat, both of approved quality for new work.
18.38.1 15mm dia nominal bore metre 12.00 9.60 115.20
18.38.2 20mm dia nominal bore metre 8.00 11.35 90.80
Providing & fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end)18.17.2 32 mm nominal bore each 2.00 501.50 1003.00
5 18.21.2.1 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC
connection pipe with brass unions. each 5.00 68.60 343.00
6 18.49.1 Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality
conforming to IS 8931. each 2.00 459.50 919.00
8 18.53.1 Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and
geyser points of approved quality conforming to IS 8931. each 4.00 507.70 2030.80
9 18.22.1 Providing & fixing 100 mm dia C.P brass shower rose with 15 mm inlet. each 2.00 72.05 144.10
10 18.32.1 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with
F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop
Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed
in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone
aggregate 20mm nominal size); necessary excavation, foundation concrete
1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12
mm thick finished with a floating coat of neat cement complete as per standard
designeach 2.00 1157.75 2315.50
2.
3.
4.
Signature of EPIL
5 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 241
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage
tank ISI : 12701 marked with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tankPer
Litre 1000.00 7.25 7250.00
TOTAL SUB HEAD (IV) (DSR'2014) 21822.90
Providing & fixing brass ball float valve with bronze floats of approved
quality complete. (Make : Zoloto / Audco)MR 25 mm nominal dia each 3.00 1433.75 4301.25
Providing & fixing of hand lever operated forged brass body full way ball valve
type isolating valve having forged brass hard chrome plated mirror finish ball,
steel handle with PVC grip, teflon seat, screwed ends tested to a pressure of 15
kg/sqcm complete.MR 15 mm nominal bore each 2.00 541.30 1082.60
MR 20 mm nominal bore each 2.00 736.00 1472.00
Providing & fixing of medium class G.I.spout up to 300 mm. length including
cutting and making good the walls and floors etc. as required.MR a) 25 mm dia each 2.00 110.30 220.60
TOTAL SUB HEAD (IV) (NON-DSR) 7076.45
V
(DSR'2012)
SUB HEAD (IV) :- WATER SUPPLY PIPES AND FITTINGS (NON-DSR)
11
13
14
SUB HEAD (V) :- EXTERNAL SEWERAGE SYSTEM
Signature of EPIL
6 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 242
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
Excavating trenches in all kind of soil of required width for pipes. including
excavation for sockets and dressing of sides, ramming of bottoms, including
getting out the excavated soil & then returning the soil as required, in layers not
exceeding 20 cm in depth including consolidating each deposited layer by
ramming, watering, etc & disposing of surplus excavated soil as directed within a
lead of 50m.up to 1.50 m depth
2.10.1.2 Pipes 80 mm to 300 mm diameter metre 35.00 208.30 7290.50
Providing, laying and jointing glazed stone ware pipes grade `A' with stiff
mixture of cement mortar in the proportion of 1:1 (1cement :1 fine
sand) including testing of joints etc complete.
19.1.2 150 mm diameter metre 35.00 314.35 11002.25
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand :
10 gradded stone aggregate 40 mm nominal size) alround S.W. Pipes
including bed concrete as per standard design.
19.2.2 150 mm diameter S.W.Pipe metre 25.00 724.70 18117.50
Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4
(1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse
sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal
size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse
sand ) finished with a floating coat of neat cement and making channels in
cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20
mm nominal size) finishd with a floating coat of neat cement complete as per
standard design
19.7.1.1 Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty)
455 x 610mm internal dimension total wt. of cover & frame to be not less than 38
kg (wt. of cover 23 kg and wt. of frame 15 kg) each 6.00 8507.00 51042.00
Extra for depth for manhole with F.P.S. bricks
19.8.1.1 size 90 X 80 cm metre 2.00 5638.20 11276.40
1
2
3
4
5
Signature of EPIL
7 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 243
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
Providing and fixing square mouth S. W. Gully trap grade `A' complete with
C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover
with frame of 300 x 300 mm size (inside) the weight of cover to be not less than
4.50 kg and frame to be not less than 2.70 kg as per standard design
19.4.3.1 180 x 150 mm. size P type each 3.00 1678.85 5036.55
TOTAL SUB HEAD (V) (DSR'2012) 103765.20
6
Signature of EPIL
8 / 8
ESS PLUMBING BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 244
S. NO DESCRIPTION DSR-2012 NON-DSR
I INTERNAL WIRING 83391.00 34280.30
II DISTRIBUTION BOARDS & MCB's 7641.00
III EARTHING SYSTEM 220499.90
IV MISCELLANEOUS 9038.50
V INTERNAL LIGHTING FIXTURES & FANS 3721.00 43949.76
TOTAL COST OF ELECTRICAL WORKS 315252.90 87268.56
Proposed construction of external development & bulk services (civil & electrical works) for
ITBP at Kalikiri, Chittoor (A.P)
INTERNAL ELECTRICAL WORKS
SUMMARY OF COST
ELECTRICAL SUB-STATION BUILDING
Signature of EPIL
1 / 1
ESS ELECTRICAL SUMMARY
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 245
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
SUB HEAD (I) :- INTERNAL WIRING (DSR)
Point wiring in PVC conduit, with piano type switch :-
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC
insulated copper conductor single core cable in surface / recessed PVC conduit, with piano
type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqmm
FR PVC insulated copper conductor single core cable etc. as required.1.8.2 PT 25.00 543.00 13575.00
Power plug wiring in PVC conduit (2 x 4 sqmm.) :-1.12 Wiring for power plug with 2 x 4 sqmm. FR PVC insulated, copper conductor single core cable
in surface / recessed PVC conduit along with 1 no 4 sqmm FR PVC insulated copper conductor
single core cable for loop earthing as required. M 8.00 162.00 1296.00
Circuit / Sub main wiring in PVC conduit :-
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of PVC
insulated, copper conductor single core cable in surface/ recessed PVC conduit as required.1.14.9 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire M 55.00 389.00 21395.00
1.14.10 4 x 10 sq.mm. + 2 x 10 sq.mm. Earth wire M 75.00 597.00 44775.00
S/F light plug point piano type accessories :-1.29 Supply and fixing metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in
recess with suitable size of phenolic laminated sheet cover in front including providing and fixing
3 pin 5/6 amps socket outlet and 5/6 amps. piano type switch, connection, painting etc. as
required. Each 5.00 194.00 970.00
S/F power plug point piano type accessories :-1.30 Supply and fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in
recess with suitable size of phenolic laminated sheet cover in the front including providing and
fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amp piano type switch, connection,
painting etc as required. Each 5.00 276.00 1380.00
TOTAL SUB HEAD (I) DSR 83391.00
SUB HEAD (I) :- INTERNAL WIRING (NON DSR)
4
5
BILL OF QUANTITIES
INTERNAL ELECTRICAL WORKS
1
2
3
Signature of EPIL
1 / 4
ESS ELECTRICAL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 246
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
1 Supply all materials, receiving, storing, handling, fixing, laying, wiring and testing for power
outlets using ISI marked (IS:694) single core, flexible, flame retardant low smoke (FRLS), stranded
copper conductors PVC insulated 1100 Volt grade wiring in concealed/ exposed system using
20/25 mm ERW black stove enamelled screwed type, ISI marked rigid steel conduit of wall
thickness 16 SWG conforming to IS 9537 part II including all conduit accessories, such as bends,
tees, draw boxes, MS point control boxes with zinc plating and yellow passivation, together with
wiring accessories such as white modular plate type switches and sockets, cover plate, grid
plate etc. including submain wiring from DB to outlet with Cu earth continuity wire, conduit being
laid in recess (concealed) either in ceiling slab / wall, chasing on surface or under false ceiling
including required clamping arrangement and required length of MS flexible conduit or in wooden
partitions etc. complete as required at site.
a MR 20 amp SPN industrial metal clad outlet in MS box with 20 amp C series MCB and metal plug top
instead of modular switch & sockets by 2x6 + 4 sq mm copper wires. 5 NOS 5696.30 28481.50
b MR 3 pin 16 amp shuttered socket outlet connected to AC switch by 2x4 + 2.5 sq mm copper wires. (A
C socket outlet provided outside at about 2500 mm height). The AC switch will be provided under
separate item as below. 5 NOS 1159.76 5798.80
TOTAL SUB HEAD (I) (NON DSR) 34280.30
SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit
breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete
with connections, testing and commissioning etc. as required.2.10.1 single pole Each 5.00 169.00 845.00
2.10.2 single pole and neutral Each 441.00
2.10.5 triple pole and neutral Each 5.00 887.00 4435.00
2 2.11 Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.Each 3.00 7.00 21.00
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
2.12.1 40 amps. Each 5.00 218.00 1090.00
2.12.2 63 amps. Each 5.00 250.00 1250.00
TOTAL SUB HEAD (II) 7641.00
SUB HEAD (IV) :- EARTHING SYSTEM
1
3
Signature of EPIL
2 / 4
ESS ELECTRICAL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 247
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
1 5.3 Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories and providing
masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but
without charcoal or coke and salt ) complete as required. Set 10.00 3557.00 35570.00
2 3.7 Extra for using salt and charcoal for G.I. or copper plate earth electrode as required. Set 10.00 801.99 8019.90
3 5.70 Supplying and laying 6 SWG G.I. wire at 0.50 M. below ground level for conductor earth
electrode, including soldering etc as required. M 25.00 27.00 675.00
4 3.15 Providing and laying earth connections from earth electrode with 6 SWG dia G.I. wire in 15 mm
dia G.I. pipe from earth electrode as required. M 25.00 27.00 675.00
5.60 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and
providing masonry enclosure with cover plate having locking arrangement and watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required. set 10.00 8359.00 83590.00
5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode
including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.M 85.00 1082.00 91970.00
TOTAL SUB HEAD (IV) 220499.90
SUB HEAD (V) :- MISCELLANEOUS
1 Providing, Laying and jointing of Spigot & socket type RCC NP-3 pipes suitable for rubber ring
joints including rings, testing of joints etc. for cable laying along roads, under road crossings or for
entry into the building as required.MR 150 mm dia. M 10.00 352.45 3524.50
2 Providing, Laying 150 mm thick PCC 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate) all round
RCC pipes for cable laying. The PCC shall be cured as required. MR 150 mm diameter RCC Pipe CUM 1.50 3676.00 5514.00
TOTAL SUB HEAD (IV) NON DSR 9038.50
SUB HEAD (V) :- INTERNAL LIGHTING FIXTURES & FANS
SUPPLY OF LIGHTING FIXTURES
Supply of wall / ceiling surface mounted fluorescent tube light luminaires with all accessories
as per standard item ballasts, starters, capacitor, control gear box, including required nos.
fluorescent tube etc complete as required as per the standard catalogue item.MR 1 x 18 watt Slimlite plus (Philips TMS 500/118) Nos 16.00 774.06 12384.96
MR 1 x 36 watt Slimlite (Philips TMS 500/136) Nos 8.00 945.60 7564.80
SUPPLY OF CEILING & EXHAUST FANS
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc.
complete (Make : Bajaj / Crompton)
1
1
Signature of EPIL
3 / 4
ESS ELECTRICAL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 248
S.
No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT
MR 1400 mm sweep Nos 4.00 1600.00 6400.00
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame
and other accessories etc. complete (Make : Bajaj / Crompton Khaitan)
MR 300 mm sweep 1400 rpm Nos 10.00 1760.00 17600.00
TOTAL SUB HEAD (V) NON DSR 43949.76
ERECTION OF LIGHTING FIXTURES AND FANS
1 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS
lamps per fitting, complete with all accessories including connections etc. as required. Each 14.00 52.00 728.00
2 1.44 Installation, testing and commissioning of ceiling fan including wiring the down rod of standard
length (upto 30 cm.) with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as
required. Each 3.00 95.00 285.00
3 1.46 Installation, testing and commissioning of resistance type ceiling fan regulator in existing switch
box including connection with 1.5 sq.mm. PVC insulated, copper conductor, single core cable,
earthing the regulator etc. as required. Each 5.00 52.00 260.00
4 1.50.1 Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole
to suit the size of the above fan, making good the damage, connections, testing, commissioning etc.
as required. Each 12.00 204.00 2448.00
TOTAL SUB HEAD (V) 3721.00
1
2
Signature of EPIL
4 / 4
ESS ELECTRICAL BOQ
EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor
Page 249
2.8.1 ALL SOILS
A
PERIMATER OF WALL 6 27.22Total M3 27.22 157.50 4,286.52
16.3 Supplying and stacking at site 16.3.8 Gravel
Total filling at site at per item no. 6 56.40
Total Qty to be supplied at
siteM3
56.40 320.90 18,098.76
4.1
4.1.8
RRM BELOW 6 3.40under floor 6 5.64Total M3 9.04Total for 1 No. Blocks M3 9.00 4301.15 38,710.35
6.4
Sub Head : Earth workDSR Item No:- 2.9
Excavation work by mechanical means (Hydraulic excavator)/ manual
means in over areas (not exceeding 1.5m in width or 10 sqm on
plan), including upto 1.5 m, including getting out the excavated soil
and disposal ofdressing of sides and ramming of bottoms, lift surplus
excavated soils as directed, within a lead of 50 m..
Providing and laying in position cement concrete of specified grade
excluding the cost of centring and shuttering - All work upto plinth
level:
1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm
nominal size)
Brick work with common burnt clay FPS (Non modular) bricks of
class designation 75 in super structure above plinth level upto floor
V level in all shapes and sizes in :
ESTIMATE FOR GUARD ROOM ON COMPOUND WALL AT ITBP,CHOTTOOR.S.No. Details of works Unit No Quantity
RATE AMOUNT
Page 250
6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand)
A230 mm Brick Work in suerstructureGround FloorWALL 6 3.73TOTAL M3 3.73 6006.20 22,379.10
MR
PERIWALL 6 22.686 25.52
GRAND TOTAL Cum 48.20Total Cum 48.00 2930.89 1,40,682.52
MR
Ground FloorW1 18 171.00TOTAL RMT 171.00
1 0.5265 79727.00 41,976.27
TOTAL CUM
9.9.1.2
W1 sqm 18 35.1035.10 2374.15 83,332.67
Random rubble masonry with hard stone in foundation and plinth
including levelling up with cement concrete 1:6:12 (1 cement : 6
coarse sand : 12 graded stone aggregate 20 mm nominal size) upto
plinth level with Cement mortar 1:6 (1 cement : 6 coarse
sand)inclusive of labour cutting and dressing of stone (The Stone
boulders shall be issued free of cost at site)
Providing wood work in frames of doors, windows, clerestory
windows and other frames, wrought framed and fixed in position
with hold fast lugs or with dash fasteners of required dia & length
(hold fast lugs or dash fasteners shall be paid for separately).
Second class teak wood
Providing and fixing glazed shutters for doors, windows and
clerestory windows using 4 mm thick float glass panes, including ISI
marked M.S. pressed butt hinges bright finished of required size
with necessary screws
Page 251
9.97
9.97.4W1 Each 36 36.00 65.35 2,352.60
ROOM 6 37.80 1367.00 51,672.60
SQM
13.5
13.5.21:6 (1 cement: 6 coarse sand)
EXTERNAL PLASTER
Total length by polyline 6 75.60Less W1 -3 -6.75
68.85 183.45 12,630.53
13.3313.33.2
PERI WALL 6 114.00
GRAND TOTAL Sqm 114.00 276.70 31,543.80
13.4613.46.1
Providing and laying polished Granite stone(MADANAPALLI) flooring
in required design and patterns, in linear as well as curvilinear
portions etc. complete as per the architectural drawings with 18mm
thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry
and pointing with white cement slurry admixed with pigment of
matching shade including rubbing, curing and polishing etc. all
complete as specified and as directed by the Engineer- in-Charge.
15 mm cement plaster on rough side of single or half brick wall of
mix :
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine Raised and cut pointing
Finishing walls with Acrylic Smooth exterior paint of required New work (Two or more coat applied @ 1.67 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
P/F aluminium tower bolts ISI Marked anodised (anodic coating not
less then grade AC 10 as per IS :1868) transparent or dyed to
required colour or shade with necessary screw etc. complete.
150 x 10 mm
Page 252
Quantity as per item 68.85 Total SQM 68.85 90.00 6,196.50
10.2
Area of sheet roofing6 12.00
Total 12.00Assumed weight @ 15 KG per
per Sqm
180.00
GRAND TOTAL KG 180.00KG 180.00 73.95 13,311.00
12.50
Area of sheet roofing6 24.00
GRAND TOTAL Sqm 24.00Total for Sqm 24.00 622.00 14,928.00
4,82,101.21
Structural steel work riveted, bolted or welded in built up sections,
trusses and framed work, including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer all
complete
Providing and fixing precoated galvanised iron profile sheets (size,
shape and pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with
Page 253
S.NO. (DSR-14) DESCRIPTION UNIT NOS QTY. RATE
A. SANITARY INSTALLATIONS DSR N.DSR
1 DSR-17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100
mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever) conforming
to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required.
DSR-17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot rests50 3392.8 169640
2 17.2 Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with manually controlled device (handle
lever), conforming to IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 139 3317.000 461063.000
3 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet (European
type) with seat and lid, 10 litre low level white vitreous china flushing cistern &
C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow
arrangement with specials of standard make and mosquito proof coupling of
approved municipal design complete including painting of fittings and brackets,
cutting and making good the walls and floors wherever required :
DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 115 4784.6 550229
17.5 Providing and fixing white vitreous china flat back half stall urinal of size
580x380x350 mm with white PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P.
brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other
couplings in C.P. brass, including painting of fittings and cutting and making good
the walls and floors wherever required
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern
103 6591.100 678883.3
Combined BOQ for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
BILL OF QUANTITY-PLUMBING - ITBP BASE CAMP
Amount
1
Page 254
4 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32
mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever require :
5 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 82 2331.15 191154.3
17.7.3White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm
C.P. brass pillar taps 292127.9
61709.117.7.4 White Vitreous China Flat back wash basin size 550x 400 mm
with single 15 mm C.P. brass pillar tap
Each 225.000
1807.1 406597.5
6 17.28Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.17.28.2 Flexible pipe17.28.2.2 40 mm dia Each 38 76.75 2916.5
7 17.8 Providing and fixing white vitreous china battery based infrared sensor operated
urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water
(250 ml & 500 ml consumption), having water inlet from back side, including
fixing to wall with suitable brackets all as per manufacturers specification and
direction of Engineer-in-charge.Each 1.00 16724.95
16724.95
8 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 20 29.50 590AR-2 Providing and Fixing angle stop cock(continental-053 KN) of jaquar make Each 257 931.000 239267
9 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar make Each 331 970.000 321070
AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 143 1335.000 190905
10 AR-1 Providing and fixing shower (HSH-1937) of jaquar make 207.000 1450.000 300150
11 AR-1 Providing and fixing towel rail of jaquar make
600 mm long towel rail with total length of 645 mm, width 78
mm and effective height of 88 mm, weighing not less than 190
Each 323.000 1364.000 440572
12 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm including painting of fittings and
brackets, cutting and making good the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
13 DSR 17.10.1.1 510x1040 mm bowl depth 250mm Each 6 7,052.15 42312.900
17.10.1.3 510x1040 mm bowl depth 200 mm Each 185 5,966.15 1103737.750
2
Page 255
14 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
Each 381 793.950 302494.950
15 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported
on anodised aluminium angle frame with C.P. brass brackets and guard rail
complete fixed with 40 mm long screws, rawl plugs etc., complete.
Each 153.000 543.800 83201.400
16 DSR 17.34 Providing and fixing toilet paper holder :
DSR 17.34.1 C.P. brass Each 91 415.90 37846.900
DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fitting arrangement of approved
quality and colour.
17 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective
height of 88mm, weighing not less than 190gms.
Each 84 541.50
45486.000
18 17.37
Providing and fixing M.S. holder-bat clamps of approved design to Sand
Cast iron/cast iron (spun) pipe embedded in and including cement
concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), including cost of cutting
holes and making good the walls etc.
17.37.1 For 100 mm dia pipe 63.00 152.90 9632.700
17.37.2 For 75 mm dia pipe Each 63 150.60 9487.800
CP BRASS FITTINGS
19MR Providing and fixing wall mixer in bathroom (Code - CON-273KNUPR) with
provision for overhead shower with 155 long bend pipeon upper side,
connecting legs & wall flages.
Each
43445.00
13780
20 MRProviding and fixing C.P. brass bib cock of approved quality conforming to
IS:893115 mm nominal bore Each 4 970.00 3880
21 MRProviding and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
3
Page 256
15 mm nominal bore Each 38 1335 50730
22 MRProviding and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931.15 mm nominal bore Each 4 619.75 2479
23 MRProviding and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 a) 15 mm nominal bore
15 mm nominal bore Each 10 507.70 5077
24MR Providing and fixing wall mixer in kitchen sink (Code - CON-309KN) with sink
mixer wiht swinging casted spout (wall mounted model) with connection legs &
wall flanges also available
Each 1 2645.00 2645
25 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32
mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever require :
26 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps. Each 22 2331.15 51285.3
27 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :18.22.2 150 mm diameter 56 86.35 4835.6
28 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements, weighing not less
than 106 gms
Each 224 164.950
36948.8
18.48 Providing and placing having three layers with thermoconductor material on
terrace (at all floor levels) polyethylene water storage tank, with cover and
suitable locking arrangement and making necessary holes for inlet, outlet and
overflow pipes but without fittings and the base support for tank.(2 tank of
capacity 5000 each)
per
litre
154047
15.000
2310705
NON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts
145 2840.000 411800
4
Page 257
29 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls.
18.8.1 15 mm nominal outer dia Pipes metre 1582 270 427140
18.8.2 20 mm nominal outer dia Pipes metre 1645 296.40 48757830 DSR 18.8.3 25 mm nominal outer dia Pipes Each 386 351.30 135601.831 DSR 18.8.4 32 mm nominal outer dia Pipes Each 105 422.40 4435232 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc.
33 DSR 18.10.3 25 mm dia nominal bore Metre 155 304.15 47143.25
18.10.5 40 mm dia nominal bore metre 895 425.65 380956.7534 DSR 18.10.6 50 mm dia nominal bore Metre 293.7 527.20 154838.64
35 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved
quality
(screwed end) : 18.17.1 25 mm nominal bore Each 146 428.85 62612.1
18.17.3 40 mm nominal bore Each 11 585.5 6440.5
18.17.4 50 mm nominal bore Each 38 750.75 28528.5
36 18.18Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :18.18.2 20 mm dia Each 18 409.90 7378.2
18.18.3 25 mm dia Each 187 449.95 84140.6537 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including all CPVC plain & brass threaded
fittings This includes jointing of pipes & fittings with one step CPVC solvent
cement ,trenching ,refilling & testing of joints complete as per direction of
Engineer in Charge
18.9.6 50 mm dia Pipes to Tank metre 306 524.100 160374.618.9.3 25 mm nominal outer dia Pipes metre 1811.5 209.500 379509.25
5
Page 258
38 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, including fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer
in Charge. Exposed on wall
39 DSR 18.7.2 20 mm nominal outer dia Pipes Each 33 190.55 6288.15
18.7.3 25 mm nominal outer dia Pipes
(Taking L.S qty.) 297.00 231.30 68696.140 DSR 18.7.4 32 mm nominal outer dia Pipes Each 50 296.70 1483541 DSR 18.7.5 40 mm nominal outer dia Pipes Each 35 407.90 14276.5
18.20 Providing and fixing brass ferrule with C.I. mouth cover including boring and
tapping the main
18.20.1 15 mm nominal bore each 176 245.850 43269.6
42 MR
Providing and placing having three layers with thermoconductor material
on terrace (at all floor levels) polyethylene water storage tank, with cover
and suitable locking arrangement and making necessary holes for inlet,
outlet and overflow pipes but without fittings and the base support for
tank.(1 tank of capacity 1000 each)
litre 5000 15.00
75000
43 MR
Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self
cleaning design complete of approved make including cost of cutting and
making good the cut-outs in walls and floors etc. Complete in all respect
as per satisfaction of the engineer- in -charge
MR 75 mm inlet and 75 mm out letEach 2 148.40 296.8
44 MR
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement
including cutting and making good the walls wherever required. (For soil
& waste pipes). Nothing extra will be paid for supports.(Inside Toilets &
Kitchen)
MR 110 mm outer dia Meter 15 450 6750
MR 75 mm outer dia Meter 20 300 6000
6
Page 259
45 MR
Providing and fixing 100% stainless steel grating of approved make and
quality grade 304 on top of floor trap. The rate includes the cost of all
ancillary works and material as required to complete the works.0
125 mm Each 2 225.00 450
46 MR
Providing and fixing in position uPVC SWR grade special /fitting of
approved make including suitable jointing to ensure leak proof service and
including cutting holes in wall ,roof ,and floors etc and making good to its
original condition as per specification and satisfaction of the engineer -in -
charge.
Coupler
110 mm Each 2 62.10 124.2
tee
110x110x110 mm Each 0 196.30 0
Bend 87.5°
110 mm bend Each 3 120.50 361.5
cowl
110 mm Each 1 27.40 27.4
47 MR Providing and placing having three layers with thermoconductor material
on terrace (at all floor levels) polyethylene water storage tank, with cover
and suitable locking arrangement and making necessary holes for inlet,
outlet and overflow pipes but without fittings and the base support for
tank.(2 tank of capacity 5000 each)
litre
2
10000 15.00 300000
SOIL, WASTE, VENT & RAIN WATER PIPES
48 MR Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self
cleaning design complete of approved make including cost of cutting and
making good the cut-outs in walls and floors etc. Complete in all respect
as per satisfaction of the engineer- in -charge
MR 75 mm inlet and 75 mm out let Each 2 20 170.00 6800
7
Page 260
49 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement
including cutting and making good the walls wherever required. (For soil
& waste pipes). Nothing extra will be paid for supports.(Inside Toilets &
Kitchen)
MR 110 mm outer dia Meter 2 120 400 96000
MR 75 mm outer dia Meter 2 120 220 52800
50 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement
including cutting and making good the walls wherever required. (For soil,
waste, vent & rain water pipes). Nothing extra will be paid for supports.)
For Vertical Pipes
MR 90 mm outer dia Meter 2 40 220 17600
MR 110 mm outer dia Meter 2 40 400 32000
51 MR Providing and fixing 100% stainless steel grating of approved make and
quality grade 304 on top of floor trap. The rate includes the cost of all
ancillary works and material as required to complete the works.
125 mm Each 2 20 225.00 9000
52 MR Providing and fixing in position uPVC SWR grade special /fitting of
approved make including suitable jointing to ensure leak proof service and
including cutting holes in wall ,roof ,and floors etc and making good to its
original condition as per specification and satisfaction of the engineer -in -
charge.Coupler
110 mm Each 25 62.10 1552.5
tee
110x110x110 mm Each 15 196.30 2944.5
Bend 87.5°
110 mm bend Each 5 120.50 602.5
cowl
110 mm Each 5 27.40 137
8
Page 261
53 MR
Providing and placing having three layers with thermoconductor material
on terrace (at all floor levels) polyethylene water storage tank, with cover
and suitable locking arrangement and making necessary holes for inlet,
outlet and overflow pipes but without fittings and the base support for
tank.(1 tank of capacity 3000 each)
litre 3000 15.00 45000
C. SOIL, WASTE, VENT & RAIN WATER PIPES
54 MR
Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self
cleaning design complete of approved make including cost of cutting and
making good the cut-outs in walls and floors etc. Complete in all respect
as per satisfaction of the engineer- in -charge
MR 75 mm inlet and 75 mm out let Each 10 148.40 1484
55 MR
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement
including cutting and making good the walls wherever required. (For soil
& waste pipes). Nothing extra will be paid for supports.(Inside Toilets &
Kitchen)
MR 110 mm outer dia Meter 15 450 6750
MR 75 mm outer dia Meter 20 300 6000
56 MR
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement
including cutting and making good the walls wherever required. (For soil,
waste, vent & rain water pipes). Nothing extra will be paid for supports.)
For Vertical Pipes
MR 90 mm outer dia Meter 5 300 1500
MR 110 mm outer dia Meter 15 400 6000
57 MR
Providing and fixing 100% stainless steel grating of approved make and
quality grade 304 on top of floor trap. The rate includes the cost of all
ancillary works and material as required to complete the works.
125 mm Each 5 225.00 1125
101mm Each 5 180.00 900
9
Page 262
58 MR
Providing and fixing in position uPVC SWR grade special /fitting of
approved make including suitable jointing to ensure leak proof service and
including cutting holes in wall ,roof ,and floors etc and making good to its
original condition as per specification and satisfaction of the engineer -in -
charge.Coupler
110 mm Each 5 62.10 310.5
tee
110x110x110 mm Each 0 196.30
Bend 87.5°
110 mm bend Each 5 120.50 602.5
cowl
110 mm Each 5 27.40 137NON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts
Sqm 60 2840170400
59 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
DSR 18.51.1 15 mm nominal bore Each 21 610.65 12823.65
61 DSR 18.50 Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931
62 DSR 18.50.1 15 mm nominal bore Each 5 459.50 2297.5
63 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
DSR 18.51.1 15 mm nominal bore Each 59 610.65 36028.35
64 DSR 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 a) 15 mm nominal bore
65 DSR 18.53.1 15 mm nominal bore Each 240 507.70 121848
18 507.70 9138.6
DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete. Each 32 793.95 25406.4
10
Page 263
66 18.48 Providing and placing having three layers with thermoconductor material on
terrace (at all floor levels) polyethylene water storage tank, with cover and
suitable locking arrangement and making necessary holes for inlet, outlet and
overflow pipes but without fittings and the base support for tank.(2 tank of
capacity 5000 each)
per
litre
10000 15.000 150000.000
67 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all
accessories & fittings.(Make:Euronics Model:EH-02) Each 23 6500.00 14950068 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and
112 mm distance from wall of standard shape with bracket of the same materials
with snap fittings of approved quality and colour, weighing not less than 105
gms.
Each 25 228.85 5721.2569 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube
and wall hook fixed to wall with rawl plug and CP brass screws complete. (Make:
Jaquar Cat. No.ALD-CHR-583)Each 64 975.00 62400
70 MR Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends
complete.(Make: Jaquar Cat.No.ALD-803B) Each 110 250.00 27500B. WATER SUPPLY INTERNAL
71 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and testing of
joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
71.1 DSR 18.7.2 20 mm nominal outer dia Pipes Each 10 190.55 1905.5
71.2 DSR 18.7.3 25 mm nominal outer dia Pipes Each 10 231.30 2313
71.3 DSR 18.7.4 32 mm nominal outer dia Pipes Each 40 296.70 11868
71.4 DSR 18.7.5 40 mm nominal outer dia Pipes Each 20 407.90 8158
11
Page 264
72 DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and the cost of cutting chases
and making good the same including testing of joints complete as per direction of
Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
72.1 DSR 18.8.2 20 mm nominal outer dia Pipes Each 160 296.40 47424
72.2 DSR 18.8.3 25 mm nominal outer dia Pipes Each 80 351.30 28104
72.3 DSR 18.8.4 32 mm nominal outer dia Pipes Each 50 422.40 21120
73 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc.
73.1 DSR 18.10.3 25 mm dia nominal bore Metre 30 304.15 9124.5
73.2 DSR 18.10.5 40 mm dia nominal bore Metre 200 425.65 85130
73.3 DSR 18.10.6 50 mm dia nominal bore Metre 20 527.20 10544
74 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint
of approved quality :
74.1 DSR 18.40.3 25 mm dia nominal bore Metre 125 8.75 1093.75
74.2 DSR 18.40.5 40 mm dia nominal bore Metre 805 11.85 9539.2574.3 DSR 18.40.6 50 mm dia nominal bore Metre 100 14.15 141574 DSR 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
74.1 DSR 18.17.1 25 mm nominal bore Each 5 428.85 2144.25
74.2 DSR 18.17.4 50 mm nominal bore Each 8 750.75 6006
75 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete :
75.1 DSR 18.18.2 20 mm dia Each 5 409.90 2049.5
75.2 DSR 18.18.3 25 mm dia Each 3 449.95 1349.85
C. SOIL, WASTE, VENT & RAIN WATER PIPES
76 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete
including cost of cutting and making good the cut-outs in walls and floors etc.
complete (P or S trap).Make:Akg/Kissan/Raksha
76.1 MR 100 mm inlet and 100 mm out let Each 101 550.00 55550
12
Page 265
77 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting
approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm
dia holes for jointing waste pipes from waste appliances jointed and sealed with
epoxy based sealant complete.(Make-Akg/Kissan/RakshaEach 101 450.00 45450
78 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded
fittings complete including jointing with solvent cement including cutting and
making good the walls wherever required. (For soil & waste pipes). Nothing extra
will be paid for supports.(Inside Toilets & Kitchen)
MR 110 mm outer dia Meter 635 450 285750
MR 75 mm outer dia Meter 555 300 166500
79 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded
fittings complete including jointing with solvent cement including cutting and
making good the walls wherever required. (For soil, waste, vent & rain water
pipes). Nothing extra will be paid for supports.) For Vertical Pipes
MR 75 mm outer dia Meter 585 300 175500
MR 110 mm outer dia Meter 555 400 222000
80 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe
fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and
jointing with solvent cement including chase cutting and making good the walls
etc. wherever required for waste connection from W. B.Sink, floor drains
etc.(Make-Akg/Kissan/Raksha
MR 40 mm outer dia Meter 170 250 42500
MR 63 mm outer dia Meter 130 300 39000
81 MR Providing and fixing 100% stainless steel grating of approved make and quality
grade 304 on top of floor trap. The rate includes the cost of all ancillary works
and material as required to complete the works.
81.1 127mm (Cat No.-SKSH5) Each 134 225.00 30150
81.2 101mm (Cat No.-SKSH4) Each 10 180.00 1800
MR Providing and fixing uPVC CLEANOUT PLUG for cleaning
For 110 OD uPVC Pipe Each 37 400.00 14800
82.1 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm
cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet complete.
Each 12 186.65 2239.8
13
Page 266
4 186.65 746.6
5 186.65 933.25
6 186.65 1119.9
83.1 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diameter and weighing not less than 440 grams.
Each 27 41.10 1109.7
AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 417 1215.000 506655
84 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complet with C.I.
grating brick masonry chamber with water tight C.I. cover with frame o f 300
x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame
to be not less than 2.70 kg as per standard design
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 123 1571.250
193263.75
TOTAL C/F SOIL/WASTE & RAIN WATER-C
D. EXTERNAL
85 DSR-19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse
sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :
4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering
12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement and making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished
with a floating coat of neat cement complete as per standard design :
DSR-19.7.1
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
DSR-19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 104 8,507.00 88472886 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture
of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including
testing of joints etc. complete :
19.1.1 100 mm diameter Meter 503 206.55 103894.65
19.1.2 150 mm diameter metre 540 314.35 169749
14
Page 267
87 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed
concrete as per standard design :
19.2.1 100 mm diameter S.W. pipe Meter 130 592.6 77038
19.2.2 150 mm diameter S.W. pipe metre 122 724.2 88352.419.8 Extra for depth for manholes
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Metre 34 5638.200
191698.819.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2
fine sand) including testing of joints etc. complete :
metre
19.6.3 250 mm dia. R.C.C. pipe Metre 660 468.600 30927619.6.2 150 mm dia. R.C.C. pipe Metre 680 348.300 23684419.21 Making connection of drain or sewer line with existing manhole including
breaking into and making good the walls, floors with cement concrete 1:2:4 mix
(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse
sand), finished with a floating coat of neat cement and making necessary
channels for the drain etc. complete
19.21.1 For pipes 100 to 250 mm diameter Each 40 364.600 1458419.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame complete as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 3 5 3957.50059362.5
MR Providing 125 Ltr capacity Solar Water Heater with storage tank and all other
required equipment including the cost of instalitation
Ltr 3 125.000 250.000
93750
88 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diameter and weighing not less than 440 grams.Each
49.141.1
2018.01
89 12.41
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed pipes.12.41.1 75 mm diameter metre 57 145.70 8304.9
15
Page 268
12.41.2 110 mm diameter metre 8.000 231.65 1853.2
90 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.12.42.1 Coupler
12.42.1.1 75 mm each 24 108.65 2607.6
12.42.4 Single tee without door
12.42.4.1 75x75x75 mm each 40 195.30 7812
12.42.6 Shoe (Plain)
12.42.6.1 75 mm Shoe each 12 167.85 2014.2
12.42.1.2 110 mm each 12 138.30 1659.6
12.42.6.2 110 mm Shoe each 4 295.10 1180.4
91 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors
17.60.2.1 Sand cast iron S&S as per IS: 3989 690 1020.900 704421
92 17.35 Providing and fixing soil, waste and vent pipes
17.35.1 100mm diameter pipe metre 1276 859.000 1096084
93 17.35.2 75mm diameter pipe
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 2066 709.100 1465000.6
17.39.1 100 mm dia
17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 158 434.500 68651
17.39.2 75 mm dia 64.000 434.500 27808
17.39.2.1 Sand cast iron S&S as per IS - 1729 Each 185 219.750 40653.75
94 17.40 Providing and fixing heel rest sanitary bend 160.000 219.750 35160
17.40.1 100 mm dia
17.40.1.1 Sand cast iron S&S as per IS - 1729 Each 167 318.350 53164.45
17.40.2 75 mm dia 149 318.350 47434.15
17.40.2.1 Sand cast iron S&S as per IS - 1729 Each 149 277.850 41399.65
17.44 Providing and fixing single equal plain junction of required degree
17.44.1 100x100x100 mm
17.44.1.1 Sand cast iron S&S as per IS - 1729 Each 99 550.650 54514.35
17.44.2.1 Sand cast iron S&S as per IS - 1729 Each 158 330.100 52155.8
17.56 Providing and fixing terminal guard
17.56.1 100 mm
16
Page 269
17.56.1.1 Sand cast iron S&S as per IS - 1729 Each 97 248.650 24119.05
17.56.2 75 mm
17.56.2.1 Sand cast iron S&S as per IS - 1729 Each 97 197.000 19109
17.57 Providing and fixing collar
17.57.1 100 mm
17.57.1.1 Sand cast iron S&S as per IS - 1729 Each 157 194.050 30465.85
17.57.2 75 mm
17.57.2.1 Sand cast iron S&S as per IS - 1729 Each 157 153.550 24107.35
17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes
and fittings of diameter
17.58.2 75 mm Each 404 205.300 82941.2
17.58.1 100 mm Each 208.000 243.750 50700
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast
(spun) iron pipes of diameter
17.59.2 75 mm Each 872.000 57.150 49834.8
17.59.1 100 mm Each 678.000 68.600 46510.8
TOTAL 16114899 4755537
Grand Total 20870435
17
Page 270
S. No.DSR 2014
No.Item Unit No. L B H Quantity Rate Amount
Sanitary installation
1 17.1
Providing and fixing water closet squatting pan (Indian
type W.C. pan ) with 100 mm sand cast Iron P or S trap,
10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the
walls and floors wherever required.
17.1.1White Vitreous china Orissa pattern W.C. pan of size
580x440
mm with integral type foot rests
Each 12 3392.8 40713.6
1 17.2 Providing and fixing white vitreous china pedestal type water
closet
(European type W.C. pan) with seat and lid, 10 litre low level
white P.V.C. flushing cistern, including flush pipe, with manually
controlled device (handle lever), conforming to IS : 7231, with
all fittings and fixtures complete, including cutting and making
good the walls and floors wherever
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each
GF Each 3 3.000
1st 2nd 3rd floor Each 6 6.000
9.000 3317.300 29855.700
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (BARRACKS )
ANNEX-4A Sanitary installation and Drainage
Total
Page 271
17.5 Providing and fixing white vitreous china flat back half stall
urinal of size 580x380x350 mm with white PVC automatic
flushing cistern, with fittings, standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in C.P. brass) with waste
fitting as per IS : 2556, C.I. trap with outlet grating and other
couplings in C.P. brass, including painting of fittings and cutting
and making good the walls and floors wherever required
Each
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern
24 24.000 6591.100 158186.400
2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.
brass pillar taps, 32 mm C.P. brass waste of standard pattern,
including painting of fittings and brackets, cutting and making
good the walls wherever require:
17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm
with single 15 mm C.P. brass pillar tap
Each
GF Each 3 3.000
1st 2nd 3rd floor Each 24 24.000
27.000 1807.10 48791.700
AR-2 Providing and Fixing angle stop cock(continental-053 KN) of
jaquar make
Each 27 27.000 931.00 25137.000
3 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar
make
Each
GF Each 3 3.000
1st 2nd 3rd floor Each 6 6.000
9.000 970.000 8730.000
AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 21 21.000 1335.000 28035.000
4 AR-1 Providing and fixing shower (HSH-1937) of jaquar make
Each 21 21.000 1450.000 30450.000
Total
Total
Page 272
5 AR-1 Providing and fixing towel rail of jaquar make
600 mm long towel rail with total length of 645 mm, width 78
mm and effective height of 88 mm, weighing not less than 190
Each
GF Each 3 3.000
1st 2nd 3rd floor Each 30 30.000
33.000 1364.000 45012.000
6 17.31 Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm thick
hard board ground fixed to wooden cleats with C.P. brass
screws and washers complete.
Each 27 27.000 793.950 21436.650
7 17.33 Providing and fixing 600x120x5 mm glass shelf with edges
round off, supported on anodised aluminium angle frame with
C.P. brass brackets and guard rail complete fixed with 40 mm
long screws, rawl plugs etc., complete.
Each
GF Each 3 3.000
3.000 543.800 1631.400
8 18.65 Providing and fixing PTMT soap Dish Holder having length of
138mm, breadth 102mm, height of 75mm with concealed
fitting arrangements, weighing not less than 106 gms
Each 3 3.000 164.950 494.850
9 18.48 Providing and placing having three layers with
thermoconductor material on terrace (at all floor levels)
polyethylene water storage tank, with cover and suitable
locking arrangement and making necessary holes for inlet,
outlet and overflow pipes but without fittings and the base
support for tank.(2 tank of capacity 5000 each)
per
litre
10000 10000.000 15.000 150000.000
Water Supply External Work
Total
Total
Page 273
10 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings This includes
jointing of pipes & fittings with one step CPVC solvent cement
,trenching ,refilling & testing of joints complete as per direction
of Engineer in Charge
18.9.6 50 mm dia Pipes to Tank metre
Horizontal 1 16.000 16.000
For water tank vertical 1 18.000 18.000
34.000 524.10 17819.400
18.9.3 25 mm nominal outer dia Pipes metre
1 183.000 183.000
183.000 209.500 38338.500
11 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in
Charge.
metre
18.8.1 15 mm nominal outer dia Pipes
1 122.000 122.000
122.000 270.000 32940.000
18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
18.17.1 25 mm nominal bore each 12 12 428.850 5146.200
18.17.4 50 mm nominal bore each 2 2.000 750.750 1501.500
18.18 Providing and fixing ball valve (brass) of approved quality, High
or low pressure, with plastic floats complete
Total
Total
Total
Page 274
18.18.3 25 mm nominal bore 12 12.000 449.950 5399.400
18.20 Providing and fixing brass ferrule with C.I. mouth cover
including boring and tapping the main
each
18.20.1 15 mm nominal bore 4 4.000 245.850 983.400
AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 27 27.000 1215.000 32805.000
30 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1
complet with C.I. grating brick masonry chamber with water
tight C.I. cover with frame o f 300 x300 mm size (inside) the
weight of cover to be not less than 4.50 kg and frame to be not
less than 2.70 kg as per standard design
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 7 7.000 1571.250 10998.750
25 17.60 Providing and fixing trap of self cleansing design with screwed
down or hinged grating with or without vent arm complete,
including cost of cutting and making good the walls and floors
17.60.2.1 Sand cast iron S&S as per IS: 3989
Each 70 70.000
70.000 1020.900 71463.000
17 17.35 Providing and fixing soil, waste and vent pipes metre
17.35.1 100mm diameter pipe
Vertical 112 112.000
Horizontal 35 35.000
147.000 859.000 126273.000
Total
Total
Page 275
19 17.35.2 75mm diameter pipe
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729
Vertical 80 80.000
Horizontal 32 32.000
112.000 709.100 79419.200
20 17.39 Providing and fixing plain bend of required degree Each
17.39.1 100 mm dia
17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 18 18.000 434.500 7821.000
17.39.2 75 mm dia
17.39.2.1 Sand cast iron S&S as per IS - 1729 Each 27 27.000 219.750 5933.250
21 17.40 Providing and fixing heel rest sanitary bend
17.40.1 100 mm dia
17.40.1.1 Sand cast iron S&S as per IS - 1729 Each 21 21.000 318.350 6685.350
17.40.2 75 mm dia
17.40.2.1 Sand cast iron S&S as per IS - 1729 Each 15 15.000 277.850 4167.750
17.44 Providing and fixing single equal plain junction of required
degree
17.44.1 100x100x100 mm
17.44.1.1 Sand cast iron S&S as per IS - 1729 Each 9 9.000 550.650 4955.850
17.44.2.1 Sand cast iron S&S as per IS - 1729 Each 18 18.000 330.100 5941.800
17.56 Providing and fixing terminal guard
17.56.1 100 mm
17.56.1.1 Sand cast iron S&S as per IS - 1729 Each 15 15.000 248.650 3729.750
17.56.2 75 mm
17.56.2.1 Sand cast iron S&S as per IS - 1729 Each 15 15.000 197.700 2965.500
17.57 Providing and fixing collar
17.57.1 100 mm
17.57.1.1 Sand cast iron S&S as per IS - 1729 Each 15 15.000 194.050 2910.750
17.57.2 75 mm
17.57.2.1 Sand cast iron S&S as per IS - 1729 Each 15 15.000 153.550 2303.250
17.58 Providing lead caulked joints to sand cast iron/centrifugally cast
(spun) iron pipes and fittings of diameter
Total
Page 276
17.58.2 75 mm Each 60 60.000 205.300 12318.000
17.58.1 100 mm Each 32 32.000 243.750 7800.000
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter
17.59.2 75 mm Each 80 80.000 57.150 4572.000
17.59.1 100 mm Each 112 112.000 68.600 7683.200
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and
clamps, i/c cutting and making good the walls etc.
18.10.6 50 mm dia nominal bore Metre 1 16.500 16.500
16.500 527.200 8698.800
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement : 4
coarse sand : 8 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total
weight
of cover and frame to be not less than 38 kg (weight of cover
23
kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 6 6.000
6.000 8507.000 51042.000
19.8 Extra for depth for manholes
Total
Total
Page 277
19.8.1 Size 90x80 cm
Page 278
19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Metre 2.000 2.000 5638.200 11276.400
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.
pipes with collars jointed with stiff mixture of cement mortar in
the proportion of 1:2 (1 cement : 2 fine sand) including testing
of joints etc. complete :
metre
19.6.3 250 mm dia. R.C.C. pipe Metre 2 30.000 60.000
60.000 468.600 28116.000
19.6.2 150 mm dia. R.C.C. pipe Metre 1 20.000 20.000 348.300 6966.000
19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) cement plastered on
both sides with cement mortar 1:3 (1 cement : 3 coarse sand),
finished with a floating coat of neat cement and making
necessary channels for the drain etc. complete
19.21.1 For pipes 100 to 250 mm diameter Each 2 2.000 364.600 729.200
19.27 Constructing brick masonry road gully chamber 50x45x60 cm
with bricks in cement mortar 1:4 (1 cement : 4 coarse sand)
including 500x450 mm pre-cast R.C.C. horizontal grating with
frame complete as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 5 5.000 3957.500 19787.500
MR Providing 125 Ltr capacity Solar Water Heater with storage
tank and all other required equipment including the cost of
instalitation
Ltr 1 125.000 250.000 31250.000
Total
Page 279
For One Block 1249215
For 3 Blocks of Barracks = (1244992 x 3 = 3734977) 3747645
Total=
Grand Total=
Page 280
S.NO. (DSR-14) DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT
A. SANITARY INSTALLATIONS
1 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush
bend, overflow arrangement with specials of standard make and mosquito
proof coupling of approved municipal design complete including painting of
fittings and brackets, cutting and making good the walls and floors wherever
required :
DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid.
Each 11 4784.60 52630.6
2 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps,32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the walls wherever require :
2.1 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm
C.P. brass pillar taps.
Each 10 2331.15 23311.5
3 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS
13983 with C.I. brackets and stainless steel plug 40 mm including painting of
fittings and brackets, cutting and making good the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
3.1 DSR 17.10.1.1 510x1040 mm bowl depth 250mm
Each 2 7,052.15 14104.3
4 17.5 Providing and fixing white vitreous china flat back half stall urinal of size
580x380x350 mm with white PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with unions and clamps (all in
C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating
and other couplings in C.P. brass, including painting of fittings and cutting
and making good the walls and floors wherever required
2 6591.100 13182.2
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern EachNON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts
Sqm 60 2840.000 170400
5 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
DSR 18.51.1 15 mm nominal bore Each 21 610.65 12823.65
6 DSR 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 a) 15 mm nominal bore
6.1 DSR 18.53.1 15 mm nominal boreEach 110 507.70 55847
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)BILL OF QUANTITY-PLUMBING .GO's MESS ITBP BASE CAMP
Page 281
7 DSR 17.34 Providing and fixing toilet paper holder :
7.1 DSR 17.34.1 C.P. brass Each 11 415.90 4574.9
8 DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete.
Each 12 793.95 9527.4
9 DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fitting arrangement of approved
quality and colour.
9.1 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and
effective height of 88mm, weighing not less than 190gms.Each 11 541.50 5956.5
10 DSR 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
10.1 DSR 18.22.2 150 mm diameter Each 9 86.35 777.15
11 DSR 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements.
Weighing not less than 106 gms.Each 9 164.95 1484.55
11 18.48 Providing and placing having three layers with thermoconductor material on
terrace (at all floor levels) polyethylene water storage tank, with cover and
suitable locking arrangement and making necessary holes for inlet, outlet
and overflow pipes but without fittings and the base support for tank.(2
tanks of capacity 5000 each)
per
litre
10000 15.000 150000.000
12 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all
accessories & fittings.(Make:Euronics Model:EH-02)
Each 0 6500.00 0
13 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high
and 112 mm distance from wall of standard shape with bracket of the same
materials with snap fittings of approved quality and colour, weighing not less
than 105 gms.Each 2 228.85 457.7
14 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC
tube and wall hook fixed to wall with rawl plug and CP brass screws
complete. (Make: Jaquar Cat. No.ALD-CHR-583) Each 11 975.00 10725
15 MR Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends
complete.(Make: Jaquar Cat.No.ALD-803B) Each 11 250.00 2750
B. WATER SUPPLY INTERNAL
1 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, including fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
1.1 DSR 18.7.2 20 mm nominal outer dia Pipes Each 15 190.55 2858.25
1.2 DSR 18.7.3 25 mm nominal outer dia Pipes Each 45 231.30 10408.5
1.3 DSR 18.7.4 32 mm nominal outer dia Pipes Each 20 296.70 5934
Page 282
1.4 DSR 18.7.5 40 mm nominal outer dia Pipes Each 20 407.90 8158
2 DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of
joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
2.1 DSR 18.8.2 20 mm nominal outer dia Pipes Each 200 296.40 59280
2.2 DSR 18.8.3 25 mm nominal outer dia Pipes Each 80 351.30 28104
2.3 DSR 18.8.4 32 mm nominal outer dia Pipes Each 40 422.40 16896
3 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c
cutting and making good the walls etc.
3.1 DSR 18.10.3 25 mm dia nominal bore Metre 40 304.15 12166
3.2 DSR 18.10.5 40 mm dia nominal bore Metre 220 425.65 93643
3.3 DSR 18.10.6 50 mm dia nominal bore Metre 30 527.20 15816
4 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic
paint of approved quality :
4.1 DSR 18.40.3 25 mm dia nominal bore Metre 40 8.75 350
4.2 DSR 18.40.5 40 mm dia nominal bore Metre 220 11.85 2607
4.3 DSR 18.40.6 50 mm dia nominal bore Metre 30 14.15 424.5
4 DSR 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
4.1 DSR 18.17.1 25 mm nominal bore Each 20 428.85 8577
4.2 DSR 18.17.4 50 mm nominal bore Each 2 750.75 1501.5
5 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
5.1 DSR 18.18.2 20 mm dia Each 5 409.90 2049.5
5.2 DSR 18.18.3 25 mm dia Each 3 449.95 1349.85
C. SOIL, WASTE, VENT & RAIN WATER PIPES
1 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design
complete including cost of cutting and making good the cut-outs in walls and
floors etc. complete (P or S trap).Make:Akg/Kissan/Raksha
1.1 MR 100 mm inlet and 100 mm out let Each 30 550.00 16500
2 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet
fitting approximately 400mm long above the trap with one or more 32/ 40/
50/ 65mm dia holes for jointing waste pipes from waste appliances jointed
and sealed with epoxy based sealant complete.(Make-Akg/Kissan/Raksha
Each 30 450.00 13500
3 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement including
cutting and making good the walls wherever required. (For soil & waste
pipes). Nothing extra will be paid for supports.(Inside Toilets & Kitchen)
Page 283
MR 110 mm outer dia Meter 150 450 67500
MR 75 mm outer dia Meter 100 300 30000
4 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection
moulded fittings complete including jointing with solvent cement including
cutting and making good the walls wherever required. (For soil, waste, vent
& rain water pipes). Nothing extra will be paid for supports.) For Vertical
Pipes
MR 75 mm outer dia Meter 110 300 33000
MR 110 mm outer dia Meter 110 400 44000
5 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe
fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps
and jointing with solvent cement including chase cutting and making good
the walls etc. wherever required for waste connection from W. B.Sink, floor
drains etc.(Make-Akg/Kissan/Raksha
MR 40 mm outer dia Meter 60 250 15000
MR 63 mm outer dia Meter 40 300 12000
6 MR Providing and fixing 100% stainless steel grating of approved make and
quality grade 304 on top of floor trap. The rate includes the cost of all
ancillary works and material as required to complete the works.
6.1 127mm (Cat No.-SKSH5) Each 32 225.00 7200
7 MR Providing and fixing uPVC CLEANOUT PLUG for cleaning
For 110 OD uPVC Pipe
Each 5 400.00 2000
8 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20
mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12
mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat
cement, rounding the edges and making and finishing the outlet complete.
Each 4 186.65 746.6
9 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diameter and weighing not less than 440 grams.
Each 4 41.10 164.4
TOTAL C/F SOIL/WASTE & RAIN WATER-C
D. EXTERNAL
1 DSR-19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal
size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with floating coat of neat cement and making channels
in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with a floating coat of neat cement
complete as per standard design :
Page 284
DSR-19.7.1
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame to
be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
DSR-19.7.1.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 8,507.00 42535
2 DSR-19.4
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with
C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg
and frame to be not less than 2.70 kg as per standard design :
DSR-19.4.1 100x100 mm size P type.
DSR-19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 1571.25 9427.5
3 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff
mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)
including testing of joints etc. complete :
19.1.1 100 mm diameter Meter 14 206.55 2891.7
4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) all-round S.W. pipes including
bed concrete as per standard design :
19.2.1 100 mm diameter S.W. pipe Meter 14 592.6 8296.4
Total 678404 425033
Grand Total 1103437
Page 285
S.NO. (DSR-14) DESCRIPTION UNIT QTY. RATE DSR NON DSR
A. SANITARY INSTALLATIONS
1 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with
seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with
fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of
standard make and mosquito proof coupling of approved municipal design complete
including painting of fittings and brackets, cutting and making good the walls and floors
wherever required :
DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 15 4784.60 71769
2 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm
C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting
and making good the walls wherever require :
2.1 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass
pillar taps. Each 18 2331.15 41960.7
3 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.
brackets and stainless steel plug 40 mm including painting of fittings and brackets,
cutting and making good the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
3.1 DSR 17.10.1.1 510x1040 mm bowl depth 250mm Each 1 7,052.15 7052.15
4 17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350
mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass
flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS
: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting
of fittings and cutting and making good the walls and floors wherever required
Each 3 6591.100 19773.3
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cisternNON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts Sqm 60 2840.000 170400
5 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS
standards and weighing not less than 690 gms.
DSR 18.51.1 15 mm nominal bore Each 21 610.65 12823.65
6 DSR 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 a) 15 mm nominal bore
6.1 DSR 18.53.1 15 mm nominal bore Each 18 507.70 9138.6
7 DSR 17.34 Providing and fixing toilet paper holder :
7.1 DSR 17.34.1 C.P. brass Each 15 415.90 6238.5
8 DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete. Each 18 793.95 14291.1
9 DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with
CP brass screws with concealed fitting arrangement of approved quality and colour.
9.1 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms. Each 15 541.50 8122.5
10 DSR 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
10.1 DSR 18.22.2 150 mm diameter Each 13 86.35 1122.55
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)BILL OF QUANTITY-PLUMBING SOS MESS ITBP BASE CAMP
Page 286
11 DSR 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.
Each 13 164.95 2144.35
12 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all accessories &
fittings.(Make:Euronics Model:EH-02) Each 0 6500.00 0
13 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112
mm distance from wall of standard shape with bracket of the same materials with snap
fittings of approved quality and colour, weighing not less than 105 gms.
Each 0 228.85 0
14 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube and
wall hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaquar Cat.
No.ALD-CHR-583) Each 15 975.00 14625
15 MR Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends
complete.(Make: Jaquar Cat.No.ALD-803B) Each 18 250.00 4500
16 MR Providing and placing having three layers with thermoconductor material on terrace (at
all floor levels) polyethylene water storage tank, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank.(2 tank of capacity 5000 each)
litre 10000 15.00 150000
TOTAL C/F SANITARY-A 194436.4
B. WATER SUPPLY INTERNAL
1 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete as per direction of
Engineer in Charge.
Internal work - Exposed on wall
1.1 DSR 18.7.2 20 mm nominal outer dia Pipes Each 10 190.55 1905.5
1.2 DSR 18.7.3 25 mm nominal outer dia Pipes Each 40 231.30 9252
1.3 DSR 18.7.4 32 mm nominal outer dia Pipes Each 15 296.70 4450.5
1.4 DSR 18.7.5 40 mm nominal outer dia Pipes Each 15 407.90 6118.5
2 DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
2.1 DSR 18.8.2 20 mm nominal outer dia Pipes Each 300 296.40 88920
2.2 DSR 18.8.3 25 mm nominal outer dia Pipes Each 60 351.30 21078
2.3 DSR 18.8.4 32 mm nominal outer dia Pipes Each 40 422.40 16896
3 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and
making good the walls etc.
3.1 DSR 18.10.3 25 mm dia nominal bore Metre 30 304.15 9124.5
3.2 DSR 18.10.5 40 mm dia nominal bore Metre 200 425.65 85130
3.3 DSR 18.10.6 50 mm dia nominal bore Metre 20 527.20 10544
4 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality :
4.1 DSR 18.40.3 25 mm dia nominal bore Metre 30 8.75 262.5
4.2 DSR 18.40.5 40 mm dia nominal bore Metre 200 11.85 2370
Page 287
4.3 DSR 18.40.6 50 mm dia nominal bore Metre 20 14.15 283
4 DSR 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
4.1 DSR 18.17.1 25 mm nominal bore Each 20 428.85 8577
4.2 DSR 18.17.4 50 mm nominal bore Each 2 750.75 1501.5
5 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with
plastic floats complete :
5.1 DSR 18.18.2 20 mm dia Each 5 409.90 2049.5
5.2 DSR 18.18.3 25 mm dia Each 3 449.95 1349.85
TOTAL C/F WATER SUPPLY-B 269812.35
C. SOIL, WASTE, VENT & RAIN WATER PIPES
1 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete
including cost of cutting and making good the cut-outs in walls and floors etc. complete
(P or S trap).Make:Akg/Kissan/Raksha
1.1 MR 100 mm inlet and 100 mm out let Each 25 550.00 13750
2 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting
approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm dia
holes for jointing waste pipes from waste appliances jointed and sealed with epoxy
based sealant complete.(Make-Akg/Kissan/Raksha Each 25 450.00 11250
3 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the
walls wherever required. (For soil & waste pipes). Nothing extra will be paid for
supports.(Inside Toilets & Kitchen)
MR 110 mm outer dia Meter 120 450 54000
MR 75 mm outer dia Meter 80 300 24000
4 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the
walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be
paid for supports.) For Vertical Pipes
MR 75 mm outer dia Meter 150 300 45000
MR 110 mm outer dia Meter 120 400 48000
5 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g.
elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent
cement including chase cutting and making good the walls etc. wherever required for
waste connection from W. B.Sink, floor drains etc.(Make-Akg/Kissan/Raksha
MR 40 mm outer dia Meter 40 250 10000
MR 63 mm outer dia Meter 40 300 12000
6 MR Providing and fixing 100% stainless steel grating of approved make and quality grade
304 on top of floor trap. The rate includes the cost of all ancillary works and material as
required to complete the works.
6.1 127mm (Cat No.-SKSH5) Each 36 225.00 8100
7 MR Providing and fixing uPVC CLEANOUT PLUG for cleaning
For 110 OD uPVC Pipe Each 14 400.00 5600
8 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over
P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :
3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing
the outlet complete. Each 5 186.65 933.25
Page 288
9 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diameter and weighing not less than 440 grams. Each 5 41.10 205.5
TOTAL C/F SOIL/WASTE & RAIN WATER-C
D. EXTERNAL
1 DSR-19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )
with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8
graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with a floating coat of neat cement complete as
per standard design :
DSR-19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of cover and frame to be not less than 38
kg (weight of cover 23 kg and weight of frame 15 kg) :
DSR-19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 8,507.00 42535
2 DSR-19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size
(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design :
DSR-19.4.1 100x100 mm size P type.
DSR-19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 1571.25 9427.5
3 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of
cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints
etc. complete :
19.1.1 100 mm diameter Meter 14 206.55 2891.7
4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per
standard design :
19.2.1 100 mm diameter S.W. pipe Meter 14 592.6 8296.4
TOTAL C/F SOIL/WASTE & RAIN WATER-C 64289
Total A+B+C 528538 571225
Grand Total 1099763
Page 289
S.NO. DSR NO. DESCRIPTION UNIT QTY. RATE
A. SANITARY INSTALLATIONS DSR N.DSR
1 17.3
Providing and fixing white vitreous china pedestal type water closet (European type)
with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush
bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with
specials of standard make and mosquito proof coupling of approved municipal design
complete including painting of fittings and brackets, cutting and making good the walls
and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 1 4784.60 4784.6
2 17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm
C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting
and making good the walls wherever require :
17.7.3White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass
pillar tapsEach 2 2127.90 4255.8
3 17.28Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste
fittings complete.
17.28.2 Flexible pipe
17.28.2.2 40 mm dia Each 2 76.75 153.5
4 17.8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of
approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml
consumption), having water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of Engineer-in-charge.
Each 1 16724.95 16724.95
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BILL OF QUANTITY-PLUMBING BIIN TYPE MAGAZINE ITBP BASE CAMP
AMOUNT
Page 290
5 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 1 29.50 29.5
6 17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete.
Each 2 793.95 1587.9
7 17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass Each 1 415.90 415.9
8 17.37
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast
iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc.
17.37.1 For 100 mm dia pipe Each 3 152.90 458.7
17.37.2 For 75 mm dia pipe Each 3 150.60 451.8
9 17.73
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats
with CP brass screws with concealed fitting arrangement of approved quality and
colour.
17.73.2600mm long towel rail with total length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms.Each 2 541.50 1083
CP BRASS FITTINGS
10
MR Providing and fixing wall mixer in bathroom (Code - CON-273KNUPR) with provision for
overhead shower with 155 long bend pipeon upper side, connecting legs & wall flages. Each 1 3445.00 3445
11 MR Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
15 mm nominal bore Each 1 970.00 970
12 MRProviding and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.
15 mm nominal bore Each 2 1335.00 2670
13 MRProviding and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.
Page 291
15 mm nominal bore Each 1 619.75 619.75
14 MRProviding and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931 a) 15 mm nominal bore
15 mm nominal bore Each 2 507.70 1015.4
15 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.2 150 mm diameter Each 1 86.35 86.35
16 18.65
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements. Weighing not less than
106 gms.
Each 1 164.95 164.95
17 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per direction of Engineer
in Charge. Concealed work, including cutting chases and making good the walls.
18.8.1 15 mm nominal outer dia Pipes metre 15 270.00 4050
18.8.2 20 mm nominal outer dia Pipes metre 10 296.40 2964
18 18.10Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and
making good the walls etc. Internal work - Exposed on wall
18.10.3 25 mm dia nominal bore (Taking LS Qty.) metre 20 304.15 6083
18.10.4 32 mm dia nominal bore metre 343.20 0
18.10.5 40 mm dia nominal bore metre 15 425.65 6384.75
Page 292
19 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.17.1 25 mm nominal bore Each 1 428.85 428.85
18.17.2 32 mm nominal bore Each 0 501.5 0
18.17.3 40 mm nominal bore Each 1 585.5 585.5
18.17.4 50 mm nominal bore Each 0 750.75 0
20 18.18Providing and fixing ball valve (brass) of approved quality, High or low pressure, with
plastic floats complete :
18.18.2 20 mm dia Each 409.90 0
18.18.3 25 mm dia Each 1 449.95 449.95
21 MR
Providing and placing having three layers with thermoconductor material on terrace (at
all floor levels) polyethylene water storage tank, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank.(1 tank of capacity 1000 each)
litre 5000 15.00 75000
C. SOIL, WASTE, VENT & RAIN WATER PIPES
22 MR
Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self cleaning design
complete of approved make including cost of cutting and making good the cut-outs in
walls and floors etc. Complete in all respect as per satisfaction of the engineer- in -
charge
MR 75 mm inlet and 75 mm out let Each 2 148.40 296.8
23 MR
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded
fittings complete including jointing with solvent cement including cutting and making
good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid
for supports.(Inside Toilets & Kitchen)
MR 110 mm outer dia Meter 15 450 6750
MR 75 mm outer dia Meter 20 300 6000
Page 293
24 MR
Providing and fixing 100% stainless steel grating of approved make and quality grade
304 on top of floor trap. The rate includes the cost of all ancillary works and material as
required to complete the works.
125 mm Each 2 225.00 450
25 MR
Providing and fixing in position uPVC SWR grade special /fitting of approved make
including suitable jointing to ensure leak proof service and including cutting holes in
wall ,roof ,and floors etc and making good to its original condition as per specification
and satisfaction of the engineer -in -charge.
Coupler
110 mm Each 2 62.10 124.2
tee
110x110x110 mm Each 0 196.30 0
Bend 87.5°
110 mm bend Each 3 120.50 361.5
cowl
110 mm Each 1 27.40 27.4
26 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
diameter and weighing not less than 440 grams.Each 1 41.10 41.1
27 12.41
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving
10 mm gap for thermal expansion, (i) Single socketed pipes.
12.41.1 75 mm diameter metre 5 145.70 728.5
28 12.42
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal
expansion.
12.42.1 Coupler
12.42.1.1 75 mm each 2 108.65 217.3
12.42.1.2 110 mm each 2 138.30 276.6
12.42.4 Single tee without door
12.42.4.1 75x75x75 mm each 5 195.30 976.5
12.42.6 Shoe (Plain)
12.42.6.1 75 mm Shoe each 2 167.85 335.7
12.42.6.2 110 mm Shoe each 1 295.10 295.1
Page 294
D. EXTERNAL
29 19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )
with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse
sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size) finished with a floating coat of neat
cement complete as per standard design :
19.7.1
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of cover and frame to be not less than
38 kg (weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 8,507.00 8507
30 19.4
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm
size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less
than 2.70 kg as per standard design :
19.4.1 100x100 mm size P type.
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 1571.25 1571.25
31 19.1
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of
cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of
joints etc. complete :
19.1.1 100 mm diameter metre 15 206.55 3098.25
19.1.2 150 mm diameter metre 15 314.35 4715.25
71906 97730
Grand Total 169636
Total
Page 295
S.NO.
(DSR-14)DESCRIPTION UNIT QTY.
RATE
DSR
AMOUNT
NON DSR
AMOUNT
A. SANITARY INSTALLATIONS
1 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with
seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with
fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design complete including
painting of fittings and brackets, cutting and making good the walls and floors wherever
required :
DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 21 4784.60 100476.6
2 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.
brass waste of standard pattern, including painting of fittings and brackets, cutting and
making good the walls wherever require :
2.1 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar
taps. Each 22 2331.15 51285.3
3 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.
brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting
and making good the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
3.1 DSR 17.10.1.1 510x1040 mm bowl depth 250mm Each 1 7,052.15 7052.15
4 17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm
with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in C.P. brass, including painting of fittings and
cutting and making good the walls and floors wherever required
Each 6 6591.100 39546.6
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern
NON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts Sqm 100 2840.000 284000
5 DSR 18.50 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
5.1 DSR 18.50.1 15 mm nominal bore Each 22 459.50 10109
6 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS
standards and weighing not less than 690 gms.
6.1 DSR 18.51.1 15 mm nominal bore Each 15 610.65 9159.75
7 DSR 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 a) 15 mm nominal bore
7.1 DSR 18.53.1 15 mm nominal bore Each 48 507.70 24369.6
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
ANNEX-2E BILL OF QUANTITY-PLUMBING MI HOSPITAL ITBP BASE CAMP
1
Page 296
8 DSR 17.34 Providing and fixing toilet paper holder :
8.1 DSR 17.34.1 C.P. brass Each 21 415.90 8733.9
9 DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete. Each 20 793.95 15879
10 DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with
CP brass screws with concealed fitting arrangement of approved quality and colour.
10.1 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms. Each 29 541.50 15703.5
11 DSR 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
11.1 DSR 18.22.2 150 mm diameter Each 6 86.35 518.1
12 DSR 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.
Each 21 164.95 3463.95
13 18.48 Providing and placing having three layers with thermoconductor material on terrace (at all
floor levels) polyethylene water storage tank, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow pipes but without
fittings and the base support for tank.(2 tank of capacity 5000 each)
per
litre
10000 15.000 150000.000
14 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all accessories &
fittings.(Make:Euronics Model:EH-02) Each 0 6500.00 0
15 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm
distance from wall of standard shape with bracket of the same materials with snap fittings
of approved quality and colour, weighing not less than 105 gms.
Each 0 228.85 0
16 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube and wall
hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaquar Cat.
No.ALD-CHR-583) Each 21 975.00 20475
17 MR Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends complete.(Make:
Jaquar Cat.No.ALD-803B) Each 42 250.00 10500
B. WATER SUPPLY INTERNAL
1 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and testing of joints complete as per direction of Engineer
in Charge.
Internal work - Exposed on wall
1.1 DSR 18.7.2 20 mm nominal outer dia Pipes Each 8 190.55 1524.4
1.2 DSR 18.7.3 25 mm nominal outer dia Pipes Each 40 231.30 9252
1.3 DSR 18.7.4 32 mm nominal outer dia Pipes Each 15 296.70 4450.5
1.4 DSR 18.7.5 40 mm nominal outer dia Pipes Each 0 407.90 0
2
Page 297
2 DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
2.1 DSR 18.8.2 20 mm nominal outer dia Pipes Each 200 296.40 59280
2.2 DSR 18.8.3 25 mm nominal outer dia Pipes Each 30 351.30 10539
2.3 DSR 18.8.4 32 mm nominal outer dia Pipes Each 25 422.40 10560
3 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and
making good the walls etc.
3.1 DSR 18.10.3 25 mm dia nominal bore Metre 25 304.15 7603.75
3.2 DSR 18.10.5 40 mm dia nominal bore Metre 185 425.65 78745.25
3.3 DSR 18.10.6 50 mm dia nominal bore Metre 30 527.20 15816
4 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality :
4.1 DSR 18.40.3 25 mm dia nominal bore Metre 25 8.75 218.75
4.2 DSR 18.40.5 40 mm dia nominal bore Metre 185 11.85 2192.25
4.3 DSR 18.40.6 50 mm dia nominal bore Metre 30 14.15 424.5
5 DSR 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
5.1 DSR 18.17.1 25 mm nominal bore Each 15 428.85 6432.75
5.2 DSR 18.17.4 50 mm nominal bore Each 2 750.75 1501.5
6 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with
plastic floats complete :
6.1 DSR 18.18.2 20 mm dia Each 8 409.90 3279.2
6.2 DSR 18.18.3 25 mm dia Each 2 449.95 899.9
C. SOIL, WASTE, VENT & RAIN WATER PIPES
1 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including
cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S
trap).Make:Akg/Kissan/Raksha
1.1 MR 100 mm inlet and 100 mm out let Each 21 550.00 11550
3
Page 298
2 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting
approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm dia holes
for jointing waste pipes from waste appliances jointed and sealed with epoxy based
sealant complete.(Make-Akg/Kissan/Raksha Each 21 450.00 9450
3 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the
walls wherever required. (For soil & waste pipes). Nothing extra will be paid for
supports.(Inside Toilets & Kitchen)
MR 110 mm outer dia Meter 115 450 51750
MR 75 mm outer dia Meter 145 300 43500
4 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the
walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be
paid for supports.) For Vertical Pipes
MR 75 mm outer dia Meter 75 300 22500
MR 110 mm outer dia Meter 55 400 22000
5 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g.
elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent
cement including chase cutting and making good the walls etc. wherever required for
waste connection from W. B.Sink, floor drains etc.(Make-Akg/Kissan/Raksha
MR 40 mm outer dia Meter 25 250 6250
MR 63 mm outer dia Meter 30 300 9000
6 MR Providing and fixing 100% stainless steel grating of approved make and quality grade 304
on top of floor trap. The rate includes the cost of all ancillary works and material as
required to complete the works.
6.1 127mm (Cat No.-SKSH5) Each 36 225.00 8100
6.2 101mm (Cat No.-SKSH4) Each 0 180.00 0
7 MR Providing and fixing uPVC CLEANOUT PLUG for cleaning
For 110 OD uPVC Pipe Each 6 400.00 2400
8 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement, rounding the edges and making and finishing the outlet
complete. Each 6 186.65 1119.9
9 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diameter and weighing not less than 440 grams. Each 6 41.10 246.6
TOTAL C/F SOIL/WASTE & RAIN WATER-C
D. EXTERNAL
4
Page 299
1 DSR-19.7Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )
with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making
channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20mm nominal size) finished with a floating coat of neat cement complete as per standard
design :
DSR-19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610
mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight
of cover 23 kg and weight of frame 15 kg) :
DSR-19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10 8,507.00 85070
2 DSR-19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size
(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design :
DSR-19.4.1 100x100 mm size P type.
DSR-19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10 1571.25 15712.5
3 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of
cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints
etc. complete :
19.1.1 100 mm diameter Meter 30 206.55 6196.5
4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per
standard design :
19.2.1 100 mm diameter S.W. pipe Meter 30 592.6 17778
TOTAL C/F SOIL/WASTE & RAIN WATER-C 775140.7 501475
Grand Total 1276616
5
Page 300
S. No.DSR 2014
No.Item Unit No. L B H Quantity Rate Amount
Sanitary installation
1 17.2 Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each
GF Each 4 4.000
1st 2nd 3rd floor Each 12 12.000
16.000 3,317.30 53,076.80
2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm
with single 15 mm C.P. brass pillar tap
Each
GF Each 4 4.000
1st 2nd 3rd floor Each 12 12.000
16.000 1,807.10 28,913.60
3 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS 13983 with C.I. brackets and stainless steel plug 40 mm
including painting of fittings and brackets, cutting and making good
the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.3 510x1040 mm bowl depth 200 mm Each 16 5,966.15 95,458.40
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - II)
ANNEX-4A Sanitary installation and Drainage
Total
Total
Page 301
AR-2 Providing and Fixing angle stop cock(continental-053 KN) of jaquar
make
Each 16 16.000 931.00 14,896.00
4 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar make Each
GF Each 12 12.000
1st 2nd 3rd floor Each 36 36.000
48.000 970.00 46,560.00
AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 16 16.000 1,335.00 21,360.00
5 AR-1 Providing and fixing shower (HSH-1937) of jaquar make
Each 16 16.000 1,450.00 23,200.00
6 AR-1 Providing and fixing towel rail of jaquar make
600 mm long towel rail with total length of 645 mm, width 78
mm and effective height of 88 mm, weighing not less than 190
Each
GF Each 8 8.000
1st 2nd 3rd floor Each 24 24.000
32.000 1,364.00 43,648.00
7 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
Each 16 27.000 793.95 21,436.65
8 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete.
Each
GF Each 4 4.000
1st 2nd 3rd floor Each 12 12.000
16.000 543.80 8,700.80
9 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting
arrangements, weighing not less than 106 gms
Each 16 16.000 164.95 2,639.20
Total
Total
Total
Page 302
10 18.48 Providing and placing having three layers with thermoconductor
material on terrace (at all floor levels) polyethylene water storage
tank, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without
fittings and the base support for tank.(2 tank of capacity 5000 each)
per
litre
10000 10000.000 15.00 1,50,000.00
Water Supply External Work
11 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes &
fittings with one step CPVC solvent cement ,trenching ,refilling &
testing of joints complete as per direction of Engineer in Charge
18.9.6 50 mm dia Pipes to Tank metre
Horizontal 1 12.000 12.000
For water tank vertical 1 6.000 6.000
18.000 524.10 9,433.80
18.9.3 25 mm nominal outer dia Pipes metre
Horizontal 8 12.000 96.000
For water tank vertical 1 48.500 48.500
144.500 209.50 30,272.75
12 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction
of Engineer in Charge.
metre
18.8.1 15 mm nominal outer dia Pipes
16 9.000 144.000
144.000 270.00 38,880.00
18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
Total
Total
Total
Page 303
18.17.1 25 mm nominal bore each 4 4 428.85 1,715.40
18.17.4 50 mm nominal bore each 2 2.000 750.75 1,501.50
18.18 Providing and fixing ball valve (brass) of approved quality, High or
low pressure, with plastic floats complete
18.18.3 25 mm nominal bore 16 16.000 449.95 7,199.20
18.20 Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main
each
18.20.1 15 mm nominal bore 16 16.000 245.85 3,933.60
AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 48 48.000 1,215.00 58,320.00
13 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complet
with C.I. grating brick masonry chamber with water tight C.I. cover
with frame o f 300 x300 mm size (inside) the weight of cover to be
not less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 8 8.000 1,571.25 12,570.00
14 17.60 Providing and fixing trap of self cleansing design with screwed down
or hinged grating with or without vent arm complete, including cost
of cutting and making good the walls and floors
17.60.2.1 Sand cast iron S&S as per IS: 3989
GF Each 8 8.000
1st 2nd 3rd floor Each 24 24.000
32.000 1,020.90 32,668.80
15 17.35 Providing and fixing soil, waste and vent pipes metre
17.35.1 100mm diameter pipe
Vertical 51 51.000
Horizontal 16 16.000
67.000 859.00 57,553.00
Total
Total
Page 304
17.35.2 75mm diameter pipe
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729
Vertical 150 150.000
Horizontal 64 64.000
214.000 709.10 1,51,747.40
16 17.39 Providing and fixing plain bend of required degree Each
17.39.1 100 mm dia
17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 434.50 3,476.00
17.39.2 75 mm dia
17.39.2.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 219.75 1,758.00
17 17.40 Providing and fixing heel rest sanitary bend
17.40.1 100 mm dia
17.40.1.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 318.35 2,546.80
17.40.2 75 mm dia
17.40.2.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 277.85 2,222.80
17.44 Providing and fixing single equal plain junction of required degree
17.44.1 100x100x100 mm
17.44.1.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 550.65 4,405.20
17.44.2.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 330.10 2,640.80
17.56 Providing and fixing terminal guard
17.56.1 100 mm
17.56.1.1 Sand cast iron S&S as per IS - 1729 Each 4 4.000 248.65 994.60
17.56.2 75 mm
17.56.2.1 Sand cast iron S&S as per IS - 1729 Each 4 4.000 197.70 790.80
17.57 Providing and fixing collar
17.57.1 100 mm
17.57.1.1 Sand cast iron S&S as per IS - 1729 Each 16 16.000 194.05 3,104.80
17.57.2 75 mm
17.57.2.1 Sand cast iron S&S as per IS - 1729 Each 16 16.000 153.55 2,456.80
18 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast
(spun) iron pipes and fittings of diameter
17.58.2 75 mm Each 32 32.000 205.30 6,569.60
17.58.1 100 mm Each 16 16.000 243.75 3,900.00
Total
Page 305
19 17.59 Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter
17.59.2 75 mm Each 96 96.000 57.15 5,486.40
17.59.1 100 mm Each 48 48.000 68.60 3,292.80
20 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
18.10.6 50 mm dia nominal bore Metre 1 18.600 18.600
18.600 527.20 9,805.92
21 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size), inside plastering 12
mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
22 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total weight
of cover and frame to be not less than 38 kg (weight of cover 23
kg and weight of frame 15 kg) :
23 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 8 8.000
Each 4 4.000
12.000 8,507.00 1,02,084.00
24 19.8 Extra for depth for manholes
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Metre 4.000 4.000 5,638.20 22,552.80
Total
Total
Page 306
25 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints
etc. complete :
metre
19.6.3 250 mm dia. R.C.C. pipe Metre 2 40.000 80.000
80.000 468.60 37,488.00
19.6.2 150 mm dia. R.C.C. pipe Metre 2 50.000 100.000 348.30 34,830.00
26 19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished
with a floating coat of neat cement and making necessary channels
for the drain etc. complete
19.21.1 For pipes 100 to 250 mm diameter Each 2 2.000 364.60 729.20
39
19.1
Providing, laying and jointing glazed stoneware pipes class SP-1 with
stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1
fine sand) including testing of joints etc. complete :
19.1.1 100 mm diameter metre 25 206.55 5,163.75
19.1.2 150 mm diameter metre 30 314.35 9,430.50
40
19.2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round
S.W. Pipes including bed concrete as per standard design :
19.2.1 100 mm diameter S.W. Pipe metre 25 592.60 14,815.00
19.2.2 150 mm diameter S.W. pipe metre 30 724.20 21,726.00
For One Block 12,17,955.47
For 5 Blocks of Type II QTRS 60,89,777.35
Total
Total=
Grand Total=
Page 307
S. No.
DSR
2014
No.
Item Unit No. L B H Quantity Rate Amount
Sanitary installation
1
17.3
Providing and fixing white vitreous china pedestal type water
closet (European type) with seat and lid, 10 litre low level white
vitreous china flushing cistern & C.P. flush bend with fittings &
C.I.brackets, 40mm flush bend, overflow arrangement with
specials of standard make and mosquito proof coupling of
approved municipal design complete including painting of
fittings and brackets, cutting and making good the walls and
floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each
GF Each 4 4.000
1st 2nd 3rd floor Each 12 12.000
16.000 4,784.60 76,553.60
2 17.2 Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each
GF Each 4 4.000
1st 2nd 3rd floor Each 12 12.000
16.000 3,317.30 53,076.80
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - III-32 QTRS)
ANNEX-4A Sanitary installation and Drainage
Total
Total
Page 1 of 8
Page 308
3 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm
with single 15 mm C.P. brass pillar tap
Each
GF Each 8 8.000
1st 2nd 3rd floor Each 24 24.000
32.000 1,807.10 57,827.20
4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS 13983 with C.I. brackets and stainless steel plug 40 mm
including painting of fittings and brackets, cutting and making good
the walls wherever required :17.10.1 Kitchen sink with drain board
17.10.1.3 510x1040 mm bowl depth 200 mm Each 16 5,966.15 95,458.40
5 AR-2 Providing and Fixing angle stop cock(continental-053 KN) of jaquar
make
Each 48 48.000 931.00 44,688.00
6 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar make Each
GF Each 8 8.000
1st 2nd 3rd floor Each 24 24.000
32.000 970.00 31,040.00
7 AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 32 32.000 1,335.00 42,720.00
8 AR-1 Providing and fixing shower (HSH-1937) of jaquar make
Each 32 32.000 1,450.00 46,400.00
9 AR-1 Providing and fixing towel rail of jaquar make
600 mm long towel rail with total length of 645 mm, width 78
mm and effective height of 88 mm, weighing not less than 190
Each
GF Each 8 8.000
1st 2nd 3rd floor Each 24 24.000
32.000 1,364.00 43,648.00
Total
Total
Total
Page 2 of 8
Page 309
10 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
Each 32 27.000 793.95 21,436.65
11 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws,
rawl plugs etc., complete.
Each
GF Each 8 8.000
1st 2nd 3rd floor Each 24 24.000
32.000 543.80 17,401.60
12 18.65 Providing and fixing PTMT soap Dish Holder having length of
138mm, breadth 102mm, height of 75mm with concealed fitting
arrangements, weighing not less than 106 gms
Each 32 32.000 164.95 5,278.40
13 18.48 Providing and placing having three layers with thermoconductor
material on terrace (at all floor levels) polyethylene water storage
tank, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without
fittings and the base support for tank.(2 tank of capacity 5000 each)
per litre 10000 10000.000 15.00 1,50,000.00
Water Supply External Work
14 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes &
fittings with one step CPVC solvent cement ,trenching ,refilling &
testing of joints complete as per direction of Engineer in Charge
18.9.6 50 mm dia Pipes to Tank metre
Horizontal 1 25.000 25.000
For water tank vertical 1 32.000 32.000
57.000 524.10 29,873.70
15 18.9.3 25 mm nominal outer dia Pipes metre
Horizontal 1 110.000 110.000
For water tank vertical 10 16.000 160.000
270.000 209.50 56,565.00
Total
Total
Total
Page 3 of 8
Page 310
16 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per
direction of Engineer in Charge.
metre
18.8.1 15 mm nominal outer dia Pipes
4 32.000 128.000
128.000 270.00 34,560.00
17 18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
18.17.1 25 mm nominal bore each 8 8 428.85 3,430.80
18.17.4 50 mm nominal bore each 2 2.000 750.75 1,501.50
18 18.18 Providing and fixing ball valve (brass) of approved quality, High or
low pressure, with plastic floats complete
18.18.3 25 mm nominal bore 40 40.000 449.95 17,998.00
19 18.20 Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main
each
18.20.1 15 mm nominal bore 32 32.000 245.85 7,867.20
20 AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 32 32.000 1,215.00 38,880.00
21 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1
complet with C.I. grating brick masonry chamber with water tight
C.I. cover with frame o f 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 8 8.000 1,571.25 12,570.00
Total
Page 4 of 8
Page 311
22 17.60 Providing and fixing trap of self cleansing design with screwed down
or hinged grating with or without vent arm complete, including cost
of cutting and making good the walls and floors
17.60.2.
1
Sand cast iron S&S as per IS: 3989
GF Each 32 32.000
1st 2nd 3rd floor Each 128 128.000
160.000 1,020.90 1,63,344.00
23 17.35 Providing and fixing soil, waste and vent pipes metre
17.35.1 100mm diameter pipe
Vertical 130 130.000
Horizontal 120 120.000
250.000 859.00 2,14,750.00
17.35.2 75mm diameter pipe
17.35.2.
1
Sand cast iron S&S pipe as per IS: 1729
Vertical 190 190.000
Horizontal 140 140.000
330.000 709.10 2,34,003.00
24 17.39 Providing and fixing plain bend of required degree Each
17.39.1 100 mm dia
17.39.1.
1
Sand cast iron S&S as per IS - 1729 Each 32 32.000 434.50 13,904.00
17.39.2 75 mm dia
17.39.2.
1
Sand cast iron S&S as per IS - 1729 Each 32 32.000 219.75 7,032.00
25 17.40 Providing and fixing heel rest sanitary bend
17.40.1 100 mm dia
17.40.1.
1
Sand cast iron S&S as per IS - 1729 Each 32 32.000 318.35 10,187.20
17.40.2 75 mm dia
Total
Total
Total
Page 5 of 8
Page 312
17.40.2.
1
Sand cast iron S&S as per IS - 1729 Each 32 32.000 277.85 8,891.20
17.44 Providing and fixing single equal plain junction of required degree
17.44.1 100x100x100 mm
17.44.1.
1
Sand cast iron S&S as per IS - 1729 Each 16 16.000 550.65 8,810.40
17.44.2.
1
Sand cast iron S&S as per IS - 1729 Each 32 32.000 330.10 10,563.20
17.56 Providing and fixing terminal guard
17.56.1 100 mm
17.56.1.
1
Sand cast iron S&S as per IS - 1729 Each 16 16.000 248.65 3,978.40
17.56.2 75 mm
17.56.2.
1
Sand cast iron S&S as per IS - 1729 Each 16 16.000 197.70 3,163.20
17.57 Providing and fixing collar
17.57.1 100 mm
17.57.1.
1
Sand cast iron S&S as per IS - 1729 Each 16 16.000 194.05 3,104.80
17.57.2 75 mm
17.57.2.
1
Sand cast iron S&S as per IS - 1729 Each 16 16.000 153.55 2,456.80
26 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast
(spun) iron pipes and fittings of diameter
17.58.2 75 mm Each 32 32.000 205.30 6,569.60
17.58.1 100 mm Each 16 16.000 243.75 3,900.00
27 17.59 Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter
17.59.2 75 mm Each 76 76.000 57.15 4,343.40
17.59.1 100 mm Each 51 51.000 68.60 3,498.60
28 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and
clamps, i/c cutting and making good the walls etc.
18.10.6 50 mm dia nominal bore Metre 1 18.600 18.600
18.600 527.20 9,805.92Total
Page 6 of 8
Page 313
29 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size), inside plastering 12
mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
30 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total weight
of cover and frame to be not less than 38 kg (weight of cover 23
kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Each 8 8.000
Each 4 4.000
12.000 8,507.00 1,02,084.00
19.8 Extra for depth for manholes
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Metre 4.000 4.000 5,638.20 22,552.80
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints
etc. complete :
metre
19.6.3 250 mm dia. R.C.C. pipe Metre 2 20.000 40.000
40.000 468.60 18,744.00
19.6.2 150 mm dia. R.C.C. pipe Metre 2 30.000 60.000 348.30 20,898.00
Total
Total
Page 7 of 8
Page 314
19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished
with a floating coat of neat cement and making necessary channels
for the drain etc. complete
19.21.1 For pipes 100 to 250 mm diameter Each 12 12.000 364.60 4,375.20
39
19.1
Providing, laying and jointing glazed stoneware pipes class SP-1 with
stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1
fine sand) including testing of joints etc. complete :
19.1.1 100 mm diameter metre 80 206.55 16,524.00
19.1.2 150 mm diameter metre 120 314.35 37,722.00
40
19.2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round
S.W. Pipes including bed concrete as per standard design :
19.2.1 100 mm diameter S.W. Pipe metre 80 592.60 47,408.00
19.2.2 150 mm diameter S.W. pipe metre 120 724.20 86,904.00
For One Block 19,58,292.6
For 2 Blocks of Type III -32 QTRS 39,16,585.1Total=
Grand Total=
Page 8 of 8
Page 315
S.NO.
DSR NO.DESCRIPTION UNIT QTY. RATE
A. SANITARY INSTALLATIONS DSR N.DSR
1 17.1
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand
cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,
with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and floors wherever required.
17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot restsEach 4 3392.8 13571.2
2 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat
and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings
& C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and
mosquito proof coupling of approved municipal design complete including painting of fittings
and brackets, cutting and making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 8 4784.60 38276.8
3 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.
brass waste of standard pattern, including painting of fittings and brackets, cutting and making
good the walls wherever require :
17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar
tapsEach 12 2127.90 25534.8
4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.
brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.3 510x1040 mm bowl depth 200 mm Each 4 5,966.15 23864.6
5 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
complete.
17.28.2 Flexible pipe
17.28.2.2 40 mm dia Each 16 76.75 1228
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)
BILL OF QUANTITY-PLUMBING TYPE-IV ITBP BASE CAMP
AMOUNT
Page 316
6 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 6 29.50 177
7 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)
complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws
and washers complete.
Each 12 793.95 9527.4
8 17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass Each 12 415.90 4990.8
9 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of
cutting holes and making good the walls etc.
17.37.1 For 100 mm dia pipe Each 24 152.90 3669.6
17.37.2 For 75 mm dia pipe Each 24 150.60 3614.4
10 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP
brass screws with concealed fitting arrangement of approved quality and colour.
17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms.Each 12 541.50 6498
CP BRASS FITTINGS
11 MR Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS
standards and weighing not less than 690 gms jaguar make continental series.
15 mm nominal bore Each 14 1335.00 18690
12 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved
make conforming to IS:8931.
18.52.1 15 mm nominal bore Each 6 619.75 3718.5
Page 317
13 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved
quality conforming to IS:8931 a) 15 mm nominal bore
18.53.1 15 mm nominal bore Each 12 507.70 6092.4
14 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.2 150 mm diameter Each 12 86.35 1036.2
15 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.Each 12 164.95 1979.4
17 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge. Exposed on wall
18.7.3 25 mm nominal outer dia Pipes metre 80 231.30 18504
(Taking L.S qty.)
18 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in Charge. Concealed work, including
cutting chases and making good the walls.
18.8.1 15 mm nominal outer dia Pipes metre 95 270.00 25650
18.8.2 20 mm nominal outer dia Pipes metre 455 296.40 134862
18.8.3 25 mm nominal outer dia Pipes metre 90 351.30 31617
19 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and making
good the walls etc. Internal work - Exposed on wall
18.10.5 40 mm dia nominal bore metre 130 425.65 55334.5
18.10.6 50 mm dia nominal bore metre 70 527.20 36904
20 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.17.1 25 mm nominal bore Each 8 428.85 3430.8
Page 318
18.17.2 32 mm nominal bore Each 0 501.5 0
18.17.3 40 mm nominal bore Each 4 585.5 2342
18.17.4 50 mm nominal bore Each 4 750.75 3003
21 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic
floats complete :
18.18.2 20 mm dia Each 409.90 0
18.18.3 25 mm dia Each 8 449.95 3599.6
22 MR Providing and placing having three layers with thermoconductor material on terrace (at all
floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.(2 tank of capacity 5000 each)
litre 10000 15.00 150000
SOIL, WASTE, VENT & RAIN WATER PIPES
23 MR Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self cleaning design
complete of approved make including cost of cutting and making good the cut-outs in walls
and floors etc. Complete in all respect as per satisfaction of the engineer- in -charge
MR 75 mm inlet and 75 mm out let Each 20 170.00 3400
24 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the walls
wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside
Toilets & Kitchen)
MR 110 mm outer dia Meter 120 400 48000
MR 75 mm outer dia Meter 120 220 26400
25 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the walls
wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for
supports.) For Vertical Pipes
MR 90 mm outer dia Meter 40 220 8800
MR 110 mm outer dia Meter 40 400 16000
26 MR Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on
top of floor trap. The rate includes the cost of all ancillary works and material as required to
complete the works.
125 mm Each 20 225.00 4500
Page 319
27 MR Providing and fixing in position uPVC SWR grade special /fitting of approved make including
suitable jointing to ensure leak proof service and including cutting holes in wall ,roof ,and
floors etc and making good to its original condition as per specification and satisfaction of the
engineer -in -charge.
Coupler
110 mm Each 25 62.10 1552.5
tee
110x110x110 mm Each 15 196.30 2944.5
Bend 87.5°
110 mm bend Each 5 120.50 602.5
cowl
110 mm Each 5 27.40 137
28 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and
weighing not less than 440 grams.Each 4 41.10 164.4
29 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap
for thermal expansion, (i) Single socketed pipes.
12.41.1 75 mm diameter metre 24 145.70 3496.8
12.41.2 110 mm diameter metre 0 231.65 0
30 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing
with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
12.42.1 Coupler
12.42.1.1 75 mm each 10 108.65 1086.5
12.42.4 Single tee without door
12.42.4.1 75x75x75 mm each 5 195.30 976.5
12.42.6 Shoe (Plain)
12.42.6.1 75 mm Shoe each 5 167.85 839.25
EXTERNAL
Page 320
31 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone
aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal
size) finished with a floating coat of neat cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610
mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of
cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 8,507.00 51042
32 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick
masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the
weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design :
19.4.1 100x100 mm size P type.
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 1571.25 9427.5
33
19.1
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement
mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.
complete :
19.1.1 100 mm diameter metre 40 206.55 8262
19.1.2 150 mm diameter metre 60 314.35 18861
34
19.2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) all-round S.W. Pipes including bed concrete as per standard
design :
19.2.1 100 mm diameter S.W. Pipe metre 35 592.6 20741
19.2.2 150 mm diameter S.W. pipe metre 56 724.2 40555.2
For One Block 614478 281027
Total 895505
For 2 Blocks of Type IV = (895505 x 2 = 1791009 ) 1791009
Total=
Grand Total=
Page 321
S.NO. DSR NO. DESCRIPTION UNIT QTY. RATE DSR N.DSR
A.
1 17.1
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand
cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,
with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and floors wherever required.
17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot restsEach 1 3392.8 3392.8
2 17.3
Providing and fixing white vitreous china pedestal type water closet (European type) with
seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with
fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design complete including painting
of fittings and brackets, cutting and making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 2 4784.60 9569.2
3 17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.
brass waste of standard pattern, including painting of fittings and brackets, cutting and
making good the walls wherever require :
17.7.3White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar
tapsEach 3 2127.90 6383.7
4 17.10
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.
brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting
and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.3 510x1040 mm bowl depth 200 mm Each 1 5,966.15 5966.15
5 17.28Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
complete.
17.28.2 Flexible pipe
17.28.2.2 40 mm dia Each 4 76.75 307
Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BILL OF QUANTITY-PLUMBING TYPE-V ITBP BASE CAMP
SANITARY INSTALLATIONS
Page 322
6 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 7 29.50 206.5
7 17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass
screws and washers complete.
Each 3 793.95 2381.85
8 17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass Each 2 415.90 831.8
9 17.37
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of
cutting holes and making good the walls etc.
17.37.1 For 100 mm dia pipe Each 12 152.90 1834.8
17.37.2 For 75 mm dia pipe Each 12 150.60 1807.2
10 17.73Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP
brass screws with concealed fitting arrangement of approved quality and colour.
17.73.2600mm long towel rail with total length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms.Each 3 541.50 1624.5
CP BRASS FITTINGS
11MR Providing and fixing wall mixer in bathroom (Code - CON-273KNUPR) with provision for overhead
shower with 155 long bend pipeon upper side, connecting legs & wall flages.Each 3 3445.00 10335
12
MR Providing and fixing wall mixer in kitchen sink (Code - CON-309KN) with sink mixer wiht swinging
casted spout (wall mounted model) with connection legs & wall flanges also available Each 1 2645.00 2645
13 MR Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
15 mm nominal bore Each 3 970.00 2910
14 MRProviding and fixing C.P. brass long body bib cock of approved quality conforming to IS
standards and weighing not less than 690 gms.
15 mm nominal bore Each 8 1335.00 10680
15 MRProviding and fixing C.P. brass stop cock (concealed) of standard design and of approved
make conforming to IS:8931.
Page 323
15 mm nominal bore Each 3 619.75 1859.25
16 MRProviding and fixing C.P. brass angle valve for basin mixer and geyser points of approved
quality conforming to IS:8931 a) 15 mm nominal bore
15 mm nominal bore Each 8 507.70 4061.6
17 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.2 150 mm diameter Each 3 86.35 259.05
18 18.65Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.Each 3 164.95 494.85
19 18.7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge. Exposed on wall
18.7.3 25 mm nominal outer dia Pipes metre 12 231.30 2775.6
(Taking L.S qty.)
20 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in Charge. Concealed work, including
cutting chases and making good the walls.
18.8.1 15 mm nominal outer dia Pipes metre 35 270.00 9450
18.8.2 20 mm nominal outer dia Pipes metre 25 296.40 7410
21 18.10Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and making
good the walls etc. Internal work - Exposed on wall
18.10.3 25 mm dia nominal bore (Taking LS Qty.) metre 35 304.15 10645.25
18.10.4 32 mm dia nominal bore metre 343.20 0
18.10.5 40 mm dia nominal bore metre 15 425.65 6384.75
Page 324
22 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.17.1 25 mm nominal bore Each 2 428.85 857.7
18.17.2 32 mm nominal bore Each 0 501.5 0
18.17.3 40 mm nominal bore Each 2 585.5 1171
18.17.4 50 mm nominal bore Each 0 750.75 0
23 18.18Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic
floats complete :
18.18.2 20 mm dia Each 409.90 0
18.18.3 25 mm dia Each 2 449.95 899.9
24 MR
Providing and placing having three layers with thermoconductor material on terrace (at all
floor levels) polyethylene water storage tank, with cover and suitable locking arrangement
and making necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tank.(1 tank of capacity 3000 each)
litre 3000 15.00 45000
C. SOIL, WASTE, VENT & RAIN WATER PIPES
25 MR
Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self cleaning design
complete of approved make including cost of cutting and making good the cut-outs in walls
and floors etc. Complete in all respect as per satisfaction of the engineer- in -charge
MR 75 mm inlet and 75 mm out let Each 10 148.40 1484
26 MR
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the walls
wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside
Toilets & Kitchen)
MR 110 mm outer dia Meter 15 450 6750
MR 75 mm outer dia Meter 20 300 6000
27 MR
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings
complete including jointing with solvent cement including cutting and making good the walls
wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for
supports.) For Vertical Pipes
MR 90 mm outer dia Meter 5 300 1500
MR 110 mm outer dia Meter 15 400 6000
Page 325
28 MR
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on
top of floor trap. The rate includes the cost of all ancillary works and material as required to
complete the works.
125 mm Each 5 225.00 1125
101mm Each 5 180.00 900
29 MR
Providing and fixing in position uPVC SWR grade special /fitting of approved make
including suitable jointing to ensure leak proof service and including cutting holes in wall
,roof ,and floors etc and making good to its original condition as per specification and
satisfaction of the engineer -in -charge.
Coupler
110 mm Each 5 62.10 310.5
tee
110x110x110 mm Each 0 196.30 0
Bend 87.5°
110 mm bend Each 5 120.50 602.5
cowl
110 mm Each 5 27.40 137
30 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter
and weighing not less than 440 grams.Each 0 41.10 0
31 12.41
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS
: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap
for thermal expansion, (i) Single socketed pipes.
12.41.1 75 mm diameter metre 4 145.70 582.8
12.41.2 110 mm diameter metre 8 231.65 1853.2
32 12.42
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
12.42.1 Coupler
12.42.1.1 75 mm each 2 108.65 217.3
12.42.1.2 110 mm each 2 138.30 276.6
12.42.4 Single tee without door
12.42.4.1 75x75x75 mm each 25 195.30 4882.5
12.42.6 Shoe (Plain)
12.42.6.1 75 mm Shoe each 10 167.85 1678.5
12.42.6.2 110 mm Shoe each 3 295.10 885.3
Page 326
D. EXTERNAL
33 19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone
aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal
size) finished with a floating coat of neat cement complete as per standard design :
19.7.1
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610
mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of
cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 3 8,507.00 25521
34 19.4
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside)
the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design :
19.4.1 100x100 mm size P type.
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 1571.25 7856.25
35 19.1
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement
mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.
complete :
19.1.1 100 mm diameter metre 35 206.55 7229.25
19.1.2 150 mm diameter metre 15 314.35 4715.25
36 19.2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) all-round S.W. Pipes including bed concrete as per standard
design :
19.2.1 100 mm diameter S.W. Pipe metre 30 592.6 17778
19.2.2 150 mm diameter S.W. pipe metre 10 724.2 7242
155372 102300
Grand Total 257671
Total