www.anvilintl.com FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Price Sheet GR.STD-9.18 | Effective: September 4, 2018 | Cancels Price Sheet GR.STD-4.18 of April 2, 2018 STANDARD PRODUCTS FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM NORTHERN REGION CUSTOMER SERVICE CENTER 800-301-2701 SOUTHERN REGION CUSTOMER SERVICE CENTER 800-451-4414
60
Embed
Price Sheet GR.STD-9.18| Effective: September 4, 2018 ...€¦ · or more, rail freight or motor freight at the lowest published rate, is allowed to . all continental U.S. rail points
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.anvilintl.com
FREIGHT ALLOWANCE:All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed.
NOTE:All orders are accepted on the basis of prices in effect at the time of shipment.
NOTICE:To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.
GENERAL • UPC numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s
website at www.anvilintl.com.• Pricing is subject to change without notice. Go to Anvil’s website for the most
current list price information, or contact your local Anvil representative.
LOSS OR DAMAGE CLAIMS:All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
Price Sheet GR.STD-9.18 | Effective: September 4, 2018 | Cancels Price Sheet GR.STD-4.18 of April 2, 2018
STANDARD PRODUCTS
FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM
NORTHERN REGION CUSTOMER SERVICE CENTER
800 -301-2701
SOUTHERN REGION CUSTOMER SERVICE CENTER
800 -451-4414
www.anvilintl.com Revised:2
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
1. CONTROLLING PROVISIONS:These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY:Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibilityor liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY:Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price ofthe defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner:(b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
4. SELLER’S LIABILITY:Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS:Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
6. SHIPMENTS:All products sent out will be carefully examined, counted and packed.The cost of any special packing or special handling caused by Buyer’srequirements or requests shall be added to the amount of the order. Noclaim for shortages will be allowed unless made in writing within ten (10)days of receipt of a shipment.
Claims for products damaged or lost in transit should be made on thecarrier, as Seller’s responsibility ceases, and title passes, on delivery to thecarrier.
7. SPECIAL PRODUCTS:Orders covering special or nonstandard products are not subject tocancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS:Prices and designs are subject to change without notice. All prices areF.O.B. Point of shipment, unless otherwise stated.
9. TAXES:The amount of any sales, excise or other taxes, if any, applicable tothe products covered by this order, shall be paid by Buyer unless Buyerprovides Seller with an exemption certificate acceptance to the taxingauthorities.
10. NUCLEAR PLANTS:Where the products, engineering design or fabrication is for nuclear plantapplications. Buyer agrees (a) to take all necessary steps to add Seller asan insured under the American Nuclear Insurers’ (ANI) pool and under theMutual Atomic Energy Reinsurance Pool (MAERP) for property damage andliability insurance and if necessary steps could have been taken, but arenot taken, Buyer shall hold Seller harmless against all such losses whichcould have been thus covered (b) Buyer agrees to hold Seller harmless withrespect to any personal injury (or death), property damage or other loss ina nuclear incident which is caused directly or indirectly by defective design,material, workmanship furnished by Buyer (or which could be so coveredbut with respect to which Buyer has elected to self-insure), and furtheragrees to waive subrogation by its carriers of such insurance against Seller,and (c) as to nuclear hazards for which Buyer cannot obtain insurancecoverage, the liability of Seller for any personal injury (or death), propertydamage or other loss directly caused by defective design, material, orworkmanship furnished by Seller shall not exceed the value at the time ofthe loss occurrence.
11. MINIMUM INVOICE:Domestic: $100 plus transportation.International: $500 plus transportation.
12. TERMS:Cash, net 30 days unless otherwise specified.
NOTE: All orders are accepted on the basis of prices in effect at the timeof shipment.
NOTICE: The prices and terms quoted, there will be added anymanufacturers or sales tax payable on the transaction under any effectivestatute.
FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. Onshipments weighing 2,500 pounds or more, rail freight or motor freightat the lowest published rate, is allowed to all continental U.S. rail pointsor all U.S. highway points listed in published tariffs (Alaska and Hawaiiexcluded). In no case will more than actual freight be allowed. Shipments(weighing less than 2,500 pounds) will be shipped prepaid. The buyer willbe invoiced for freight costs at the applicable published class, exception orcommodity rate(s) or charge(s). Anvil reserves the right to select the carrierfor all shipments.
www.anvilintl.com 3
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised: Revised:
Standard Gaskets - Your order must specify gasket grade
Special Gaskets
*Contact Anvil for specific service recommendations. Specify gasket grade when ordering.Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.Additional gasket compounds and configurations are available — contact an Anvil Representative.
XTREME LUBRICANT USAGE GUIDE
SIZE OF GASKET
NUMBER OF GASKETS PER
QUART2" 1,200
3" 900
4" 600
6" 390
8" 300
10" 255
12" 180
14" 150
16" 120
18" 105
20" 90
24" 60
GRUVLOK DIAMETER TAPE
Available upon request. Contact an Anvil representative for pricing.
GRADETEMPERATURE
RANGE COMPOUNDCOLOR CODE *GENERAL SERVICE APPLICATION
O -20°F to +300°F FluoroElastomer Blue High-temperature resistance to oxidizing acids, petroleum oils,
hydraulic fluids, halogenated hydrocarbons, and lubricants.
L -40°F to +350°F Silicone RedGasket Dry, hot air, and some high-temperature chemical services.
E(type A)
-40°F to +150°F Pre-Lubricated Violet Wet and Dry (oil-free air) pipe fire protection sprinkler systems.For dry pipe systems, Gruvlok Xtreme™ Lubricant is required.
STANDARD LUBRICANT USAGE GUIDE
SIZE OF GASKET
NUMBER OF GASKETS
PER TUBE PER QUART2" 55 400
3" 45 300
4" 25 200
6" 20 130
8" 15 100
10" 10 85
12" 9 60
14" 7 50
16" 6 40
18" 5 35
20" 4 30
24" 3 20
GRADETEMPERATURE
RANGE COMPOUNDCOLOR CODE *GENERAL SERVICE APPLICATION
E -40°F to +230°F EPDM GreenWater, dilute acids, alkalies, salts and many chemical services not involving hydrocarbons, oils, or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
EP -40°F to +250°F EPDM Green and Red
Water, dilute acids, alkalies, salts and many chemical services not involving hydrocarbons, oils, or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
T -20°F to +180°F Nitrile (Buna-N) OrangePetroleum products, vegetable oils, mineral oils, and air contaminated with petroleum oils. NOT FOR USE IN HOT WATER SERVICES.
CTS Copper System ................................................................................................................................................40-45Rigid Coupling Fig. 6400..........................................................................................................................................................................................................................................40SlideLOK Coupling Fig. 64 .......................................................................................................................................................................................................................................40Reducing Coupling with Grade “EN” EPDM Gasket Fig. 616 .......................................................................................................................................................................40Transition Coupling for Joining IPS to Copper Tubing Systems with Grade “EN” Fig. 617 ..............................................................................................................4090° Elbow Fig. 6050 (Gr x Gr) ..................................................................................................................................................................................................................................4045° Elbow Fig. 6051(Gr x Gr) ...................................................................................................................................................................................................................................40Tee Fig. 6060 (Gr x Gr x Gr) ......................................................................................................................................................................................................................................40
Grooved Concentric Reducer Fig. 650 ................................................................................................................................................................................................................41Reducing Tee Grooved x Grooved x Grooved Fig. 621 .................................................................................................................................................................................41Reducing Tee Grooved x Grooved x Cup Fig. 618 ..........................................................................................................................................................................................41Grooved Reducer Grooved x Cup Fig. 652 ........................................................................................................................................................................................................41Tee Fig. 619 ...................................................................................................................................................................................................................................................................41Grooved 45° Elbow Fig. 601 ...................................................................................................................................................................................................................................41Grooved 90° Elbow Fig. 610 ...................................................................................................................................................................................................................................41Cap Fig. 660 ..................................................................................................................................................................................................................................................................41Reducing Tee Fig. 6061 (Gr x Gr x Gr) & Fig. 6064 (Gr x Gr x Cup) ............................................................................................................................................................42Concentric Reducer Fig. 6072 (Gr x Gr) & Fig. 6075 (Gr x Cup) ..................................................................................................................................................................42Cap Fig. 6074 ................................................................................................................................................................................................................................................................43Flange Adapter Fig. 6084 ........................................................................................................................................................................................................................................43Butterfly Valve Fig. 6700 Series .............................................................................................................................................................................................................................43
Specialty Fittings for Grooved-End Pipe ..............................................................................................................44-4590° Adapter Elbows Fig. 7055 ................................................................................................................................................................................................................................4445° Adapter Elbows Fig. 7056 ................................................................................................................................................................................................................................44Reducing Tee Wyes Fig. 7067 .................................................................................................................................................................................................................................44Steel Swaged Nipples Figs. 7077, 7078, and 7079 .........................................................................................................................................................................................45Adapter Nipples Figs. 7080, 7081, and 7082 ....................................................................................................................................................................................................45Plain End Adapter Nipples Figs. 7080P, 7081P, and 7082P ..........................................................................................................................................................................45
Plain-End Fittings (For use with Fig. 7005 Coupling only) ..................................................................................46-4790° Elbows Fig. 7050P ...............................................................................................................................................................................................................................................4690° Long Radius Elbows Fig. 7050LRP ................................................................................................................................................................................................................4645° Elbows Fig. 7051P ...............................................................................................................................................................................................................................................4645° Long Radius Elbows Fig. 7051LRP ................................................................................................................................................................................................................46Tee Fig. 7060P ..............................................................................................................................................................................................................................................................46Cross Fig. 7068P ..........................................................................................................................................................................................................................................................46Lateral Fig. 7069P .......................................................................................................................................................................................................................................................46True WYE Fig. 7071P ..................................................................................................................................................................................................................................................46Bull Plug Fig. 7075P ...................................................................................................................................................................................................................................................46Fabricated Steel Reducing Tees Fig. 7061P .......................................................................................................................................................................................................47Flange Nipples Fig. 7084P and 7085P ................................................................................................................................................................................................................47 Rigid Coupling 316 SS with Grade “EN” or Grade “T” Nitrile Tri-Seal Gasket Fig. 472 ........................................................................................................................47Flexible Coupling 316 SS with Grade “EN” or Grade “T” Gasket Fig. 405 ...............................................................................................................................................47
Stainless Steel Fittings and Couplings .................................................................................................................47-51Rigidlite Coupling Fig. 7400SS ..............................................................................................................................................................................................................................48Rigid Coupling 316 SS with Grade “EN” or Grade “T” Nitrile Gasket Fig. 472 ........................................................................................................................................47Flexible Coupling 316 SS with Grade “EN” or Grade “T” Gasket Fig. 405 ................................................................................................................................................47Flange Adapter Fig. 7084SS ....................................................................................................................................................................................................................................4890° Elbow Fig. 7050SS ...............................................................................................................................................................................................................................................4945° Elbow Fig. 7051SS ...............................................................................................................................................................................................................................................49Caps Fig. 7074SS .........................................................................................................................................................................................................................................................49Tees Fig. 7060SS ..........................................................................................................................................................................................................................................................49Reducing Tees Fig. 7061SS ......................................................................................................................................................................................................................................50Concentric Reducers Fig. 7072SS .........................................................................................................................................................................................................................50Eccentric Reducers Fig. 7073SS .............................................................................................................................................................................................................................51Stainless Steel Grooved Butterfly Valve EPDM or Nitrile Lever Operator Fig. B480 ...........................................................................................................................51Stainless Steel Grooved Ball Valve (600) PSI Fig. BV435 ...............................................................................................................................................................................51
Roll Groovers ............................................................................................................................................................... 52Model 1007/3007 Roll Groover .............................................................................................................................................................................................................................52
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
C US
For listing/approval details contact your Gruvlok Representative.
Sizes 1"-14" Sizes 16"-24" Sizes 28" and 30"
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Number of bolts equals housing segments.Weights are approximate and subject to change.Grade “O” or “L” gaskets are available. Contact your Anvil representative for more details.
Couplings for Grooved-End PipeFlexible Coupling Fig. 7001
Working pressure and end load values are for standard wall pipe.
1 ¼ 1.660 1.35 $64.66 $83.74 $104.41 $124.55 25 3/8 x 2¼1 ½ 1.900 1.44 $78.44 $96.99 $113.42 $136.21 20 3/8 x 2¼
2 2.375 2.03 $95.40 $125.08 $117.66 $139.92 20 3/8 x 2¼2 ½ 2.875 2.29 $110.77 $154.23 $139.92 $164.83 20 3/8 x 2¼
3 3.500 3.05 $122.96 $169.07 $147.34 $178.08 15 ½ x 2¾3 ½ 4.000 3.37 $150.52 $195.04 - - - ½ x 3
4 4.500 4.68 $177.02 $248.04 $210.41 $257.05 10 ½ x 35 5.563 6.13 $266.06 $381.07 $356.69 $424.53 - 5/8 x 3½6 6.625 8.63 $314.29 $449.97 $394.32 $478.06 - 5/8 x 3½8 8.625 14.00 $509.33 $756.84 $654.55 $784.40 - ¾ x 4½
Contact Anvil for specific service recommendations. Specify gasket grade when ordering.Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Number of bolts equals housing segments.Weights are approximate and subject to change.Grade “O” or “L” gaskets are available. Contact your Anvil representative for more details.
Lightweight Flexible Coupling Fig. 7000
Hingelok Coupling Fig. 7003
C US
For listing/approval details contact your Gruvlok Representative.
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: 9
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised:
NOMINAL PIPE SIZE (INCHES)
PIPE OUTSIDE
DIAMETER (INCHES)
APRX. WEIGHT
EACH (LBS)
COUPLING COMPLETE WITH “EP” OR “T” GASKET
(PRICE EACH)
COUPLING COMPLETE WITH FLUSH GAP™ “EP” OR “T”
GASKET (PRICE EACH)
BOX QTY.
PLATED BOLT &
NUT SIZE (INCHES)PAINTED GALV. PAINTED GALV.
1 1.315 1.21 $69.43 $83.74 $69.43 $83.74 - ³⁄₈ x 2¼1 ¼ 1.660 1.36 $69.43 $83.74 $77.91 $86.92 25 ³⁄₈ x 2¼1 ½ 1.900 1.32 $71.55 $84.80 $83.21 $95.93 20 ³⁄₈ x 2¼
2 2.375 1.82 $80.03 $93.81 $89.57 $103.35 20 ³⁄₈ x 2¼2 ½ 2.875 1.82 $91.69 $110.24 $105.47 $122.96 20 ³⁄₈ x 2¼
3 3.500 2.67 $103.88 $127.20 $113.42 $133.03 15 ³⁄₈ x 2¾4 4.500 3.57 $146.81 $175.43 $161.12 $187.62 10 ³⁄₈ x 2¾5 5.563 4.60 $192.92 $230.02 $194.51 $314.29 - ½ x 36 6.625 5.20 $230.02 $265.53 $301.57 $350.86 - ½ x 38 8.625 9.45 $365.17 $443.08 $372.06 $565.51 - ½ x 3
Sizes 1¹/₂"-12" Sizes 14"-18" Sizes 20"-24"
Rigidlok™ Rigid Coupling Fig. 7401
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Number of bolts equals housing segments. Weights are approximate and subject to change.Contact Anvil for specific service recommendations. Specify gasket grade when ordering.Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.
C US
For listing/approval details contact your Gruvlok Representative.
Rigidlite® 300 PSI Coupling Fig. 7400
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Contact Anvil for specific service recommendations. Specify gasket grade when ordering. Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.
PIPE SIZE (INCHES)
PIPE OUTSIDE
DIAMETER (INCHES)
APRX. WEIGHT
EACH (LBS.)
COUPLING COMPLETE WITH “EP” OR “T” GASKET
(PRICE EACH)
COUPLING COMPLETE WITH FLUSH GAP™ “EP” OR “T”
GASKET (PRICE EACH)
7401-2 COUPLING COMPLETE WITH FLUSH GAP™ “E” OR “T”
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Note: Not recommended for Vacuum ServiceAll bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Weights are approximate and subject to change.
Reducing Coupling Fig. 7010
Fig. 7010Coupling with Gasket
SlideLOK Rigid Coupling Fig. 74
NOMINAL PIPE SIZE (INCHES)
APRX. WEIGHT
EACH (LBS.)
COUPLING COMPLETE WITH “EP” OR “T” GASKET
(PRICE EACH)
BOX QTY.
COUPLING BOLTS
PAINTED GALV. GALV. SIZE2 2.68 $94.34 $119.25 15 2 ½ x 23/₄
2 ½ 2.94 $108.12 $136.21 15 2 ½ x 23/₄3 3.64 $124.55 $158.47 12 2 ½ x 3½4 4.86 $173.31 $224.19 10 2 ½ x 3½5 5.61 $224.19 $291.50 8 2 ½ x 3½6 6.37 $293.62 $381.07 6 2 ½ x 3½8 13.20 $462.69 $601.55 - 2 3/₄ x 4½
NOMINAL PIPE SIZE (INCHES)
APRX. WEIGHT
EACH (LBS.)
COUPLING COMPLETE WITH “E” OR “T” GASKET
(PRICE EACH)
BOX QTY.
PLATED BOLT & NUT SIZE
(INCHES)PAINTED GALV.2 x 1 ½ 3.13 $125.61 $152.11 - ½ x 2¾2 ½ x 2 3.57 $163.24 $202.99 - ½ x 2¾
3 x 2 4.30 $184.44 $233.20 - ½ x 2¾3 x 2 ½ 4.12 $160.59 $202.99 - ½ x 2¾
4 x 2 8.90 $291.50 $366.23 - 5/8 x 3½4 x 2 ½ 7.37 $260.76 $342.91 - 5/8 x 3½
4 x 3 6.69 $245.39 $315.35 - 5/8 x 3½5 x 4 7.30 $328.60 $429.83 - ¾ x 4½6 x 4 9.51 $493.43 $621.16 - ¾ x 4½6 x 5 8.30 $433.01 $560.21 - ¾ x 4½8 x 6 16.70 $736.70 $931.74 - ¾ x 4½
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com 11
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Contact Anvil for specific service recommendations. Specify gasket grade when ordering.Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.
C US
For listing/approval details contact your Gruvlok Representative.
x 1 ½ 11.80 $384.25 $738.29 - - - --x 2 11.00 $543.78 $738.29 - - - -
6
x 1 - - - 18.00 $732.46 $950.82 -x 1 ½ 18.00 $769.56 - 18.00 $732.46 $950.82 -
x 2 18.00 $769.56 $1,067.42 - - - -
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com Revised:12
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Fig. 7004 EGwith EG Gasket
HPR Coupling Fig. 7004 HPR(with Standard Gasket)
Double Grooved Coupling Fig. 7377
End Guard Coupling Fig. 7004 EG(with End Guard Gasket)
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Weights are approximate and subject to change.For pricing on spare parts see pages 30-32.
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Contact Anvil for specific service recommendations. Specify gasket grade when ordering. Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Contact Anvil for specific service recommendations. Specify gasket grade when ordering. Use Gruvlok lubricant on gaskets. Check gasket color code to be certain it is recommended for the service intended.
C US
For listing/approval details contact your Gruvlok Representative.
NOMINAL PIPE SIZE (INCHES)
PIPE OUTSIDE
DIAMETER (INCHES)
APRX. WEIGHT
EACH (LBS.)
COUPLING COMPLETE WITH “EP” OR “T” GASKET
(PRICE EACH) BOX QTY.
PLATED BOLT &
NUT SIZE (INCHES)PAINTED GALV.
2 2.375 3.90 $92.75 $133.56 - 5/8 x 2¾2 ½ 2.875 4.85 $106.53 $151.58 - 5/8 x 3½
3 3.500 5.33 $118.19 $169.60 - 5/8 x 3½4 4.500 8.93 $171.72 $258.64 - ¾ x 4½5 5.563 13.95 $417.11 $516.75 - 7/8 x 5½6 6.625 16.10 $308.46 $469.58 - 7/8 x 5½8 8.625 28.00 $492.37 $749.95 - 1 x 5½
10 10.750 39.20 $909.48 $1,318.64 - 1 x 6½12 12.750 43.90 $1,323.94 $1,990.68 - 1 x 6½
NOMINAL PIPE SIZE (INCHES)
PIPE OUTSIDE
DIAMETER (INCHES)
APRX. WEIGHT
EACH (LBS.)
COUPLING COMPLETE WITH “E” OR “T” GASKET
(PRICE EACH) BOX QTY.
PLATED BOLT &
NUT SIZE (INCHES)PAINTED GALV.
2 2.375 3.56 $136.21 $181.79 - 5/8 x 2¾2 ½ 2.875 4.85 $157.41 $216.24 - 5/8 x 3½
3 3.500 4.81 $175.43 $244.86 - 5/8 x 3½4 4.500 8.93 $247.51 $354.57 - ¾ x 4½6 6.625 15.09 $426.12 $604.73 - 7/8 x 5½8 8.625 25.10 $656.14 $939.69 - 1 x 5½
10 10.750 39.20 $1,302.74 $1,725.15 - 1 x 6½12 12.750 51.00 $1,551.84 $2,325.64 - 1 x 6½
NOMINAL PIPE SIZE (INCHES)
PIPE OUTSIDE DIAMETER (INCHES)
APRX. WEIGHT
EACH (LBS)
COUPLING COMPLETE WITH END GUARD “T” GASKET
(PRICE EACH)
COUPLING COMPLETE WITH C-STYLE “E” OR “T” GASKET
(PRICE EACH)
COUPLING COMPLETE WITH FLUSH CAP “E” GASKET
(PRICE EACH)BOX QTY.
PLATED BOLT & NUT SIZE
(INCHES)6 2.375 42.60 3,953.80 3,594.46 3,953.80 - 1 x 5½8 2.875 72.00 5,471.72 4,976.17 5,471.72 - 1½ x 6½
10 3.500 98.30 7,004.48 6,370.07 7,003.95 - 1½ x 6½
The Gruvlok 300# Flange bolt hole pattern conforms to Class 300 steel, utilizing standard flange bolts.**Flange Sealing rings are recommended for use between wafer / lug type valves and Gruvlok flanges.Flange Bolts, Nuts and Gaskets not provided.
HDPE Flange has ductile iron housing. Not supplied with flange bolts, nuts or gasket.*Contact your Anvil Representative for galvanized pricing.
2 2.375 4.50 $603.14 15 ½ x 23/83 3.500 6.00 $705.43 12 ½ x 34 4.500 8.50 $823.09 4 ½ x 36 6.625 12.50 $1,130.49 3 5/8 x 3½8 8.625 20.50 $1,300.62 2 5/8 x 3½
10 10.750 34.50 $1,793.52 1 7/8 x 5½12 12.750 42.50 $2,051.10 1 7/8 x 5½
For 14"-24" please see 7050LR list prices. Gruvlok fittings are full flow fittings made of ductile iron. Also available in 304 and 316 Stainless Steel.
For 14"-24" please see 7051LR list prices. Gruvlok fittings are full flow fittings made of ductile iron. Also available in 304 and 316 Stainless Steel.
Fittings for Grooved-End PipeC US
For listing/approval details contact your Gruvlok Representative.
C US
For listing/approval details contact your Gruvlok Representative.
The Gruvlok Flange bolt hole pattern conforms to Class 150 steel and Class 125 cast iron flanges utilizing standard flange bolts.*Available with pn 10/16 bolt hole patterns.∆ New Viton Gasket is POA – Please check with an Anvil Sales Representative for more Information.Flange Sealing Rings are recommended for use between wafer/lug type valves and Gruvlok Flanges. For applications with wafer valves a latch bolt is recommended on both sides of the flange. (request extra latch bolt) Use: ³/₈ x 2½ for 2"-6", ½ x 3½ for 8"-12" sizes.
Sizes 2"-12" Sizes 14"-24"
Gruvlok Flange Fig. 7012C US
For listing/approval details contact your Gruvlok Representative.
NOTE: 10" and 12" Flange Adapters have a machine raised face. 2" through 8" Flange Adapters have a cast raised face.The Gruvlok Flange Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. Ductile Iron conforming to ASTM A 536, Grade 65-45-12.For other coating requirements contact an Anvil Representative for more information.
Gruvlok Flange Adapter Fig. 7788
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: 15
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
* Gruvlok fittings are full flow fittings made of ductile iron except those marked (*) which are full flow fabricated steel. Also available in 304 and 316 Stainless Steel.
* Gruvlok fittings are full flow fittings made of ductile iron except those marked (*) which are full flow fabricated steel.
C US
For listing/approval details contact your Gruvlok Representative.
C US
For listing/approval details contact your Gruvlok Representative.
* Gruvlok fittings are full flow fittings made of ductile iron except those marked (*) which are full flow 11/2 D fabricated steel.
22¹/₂° Elbows Fig. 7052
11¹/₄° Elbows Fig. 7053C US
For listing/approval details contact your Gruvlok Representative.
C US
For listing/approval details contact your Gruvlok Representative.
*Gruvlok fittings are full flow fittings made of ductile iron except those marked (*) which are fabricated steel. Also available in 304 and 316 Stainless Steel.
Reducing Tees Fig. 7061
C US
For listing/approval details contact your Gruvlok Representative.
* Gruvlok fittings are full flow fittings made of ductile iron except those marked (*) which are fabricated steel.
C US
For listing/approval details contact your Gruvlok Representative.
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com Revised:18
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
NOMINAL PIPE SIZE (INCHES)
APRX. WEIGHT EACH (LBS)
PRICE EACHBOX QTY.PAINTED
3 x 2 1.60 $885.10 -4 x 2 2.50 $1,176.60 -
4 x 2 ½ 2.60 $1,065.30 -4 x 3 2.60 $990.57 -5 x 3 4.50 $1,741.58 -5 x 4 4.50 $1,530.64 -6 x 4 7.10 $1,325.00 -6 x 5 7.40 $1,455.91 -8 x 6 12.60 $1,667.91 -
*Gruvlok fittings are full flow fittings made of ductile iron except those marked (*) which are fabricated steel. Also available in 304 and 316 Stainless Steel.
(Cast) (Weld)
Concentric Reducer Fig. 7072, Groove by Groove (Gr x Gr)
C US
For listing/approval details contact your Gruvlok Representative.
Concentric Reducer Fig. 7072GF, Groove by Flange (Gr x Flg)
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: 19
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
2 ½ $997.463 $1,126.254 $1,237.555 $2,357.976 $2,495.24
Orders for items in shaded areas cannot be canceled or returned.
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: 27
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised:
VALVES & ACCESSORIES
www.anvilintl.com 87
Intr
oduc
tion
Coup
lings
Out
lets
Fitt
ings
Valv
es &
A
cces
sorie
sH
igh
Pres
sure
Di-E
lect
ricN
ippl
esPl
ain-
End
Fitt
ings
HD
PECo
uplin
gsSo
ck-It®
Fitt
ings
Stai
nles
sSt
eel M
etho
dRo
ll G
roov
ers
Inst
alla
tion
& A
ssem
bly
Spec
ial
Coat
ings
Des
ign
Serv
ices
Tech
nica
lD
ata
Mas
ter F
orm
at3
Part
Spe
cs.
Pict
oria
lIn
dex
CTS
Copp
er
Syst
em
SERIES 7500Ball-valves
The Series 7500 grooved-end ball valve line consists of a 2" to 6", two piece design, and is available in configurations to address a broad spectrum of application requirements.
The Series 7500 has generous factors of safety for pressure retention and stem torsional strength. In addition, it has a blow-out proof stem design, low operating torque, and high Cv.
The Series 7500 is compliant with NACE MR01-75 when stainless steel trim is specified.
Grooved ends conform to the requirements of AWWA C606 for steel pipe.
For special configurations, contact your Anvil representative.
MATERIAL SPECIFICATIONS
DUCTILE IRON/STAINLESS STEEL
BODY: Ductile Iron ASTM A 395
ENDPLATE: Ductile Iron ASTM A 395
BALL: Stainless Steel 316 or 304
STEM: 316 Stainless Steel
THRUST WASHER: RTFE
STEM SEAL: Flouroelastomer
RETAINING RING: Carbon Steel
HANDLE: Carbon Steel Zinc Plated
HANDLE NUT: 300 Series Stainless Steel
SEAT: RTFE
BODY SEAL: Viton
LOCK PLATE: 300 Series Stainless Steel
SERIES 7500 BALL VALVES (ORDERING INFORMATION)
Sample Part Number4" GI-7512-2 ––>
4" G I - 75 4 2 - 2Size Configuration Body/End
MaterialSeries Ball and Stem
MaterialSeat
Material Operator
2" - 6" G - 2 Way Grooved End
I - Ductile Iron ASTM A395
75 - 7500 4 - 304 Stainless Steel (2" - 4")
2 - RTFE / Flouroelastomer
2 - 2 Position Locking Handle
6 - 316 Stainless Steel 3 - Bare Stem (6" only)
For stainless steel, see the stainless steel section.
PRESSURE-RATING: 800 psig CWP (55 bar) in ASTM A 395 Ductile Iron
The nominal torque values are for water and lubricating service only.For dry gasses an additional multiplier of 2 should be applied to the nominal values.Additional torque of up to 3 times the nominal value may be required to break the ball loose if the valve is not frequently operated.
0
10
20
30
40
50
60
70
80
0 100 200 300 400 500 600 700 800
TOR
QU
E - F
T. L
BS.
6" Valve
4" Valve
3" Valve
2" Valve
OPERATING PRESSURE - PSI
NOMINAL OPERATING TORQUE
GL-8.14
Mining HandleM -
Fig. 7500 Sizes 2" - 4"
DI Body with 304 Stainless Steel Trim (Example: 7542-2)
Gruvlok® Ball Valves Fig. 7500
DI Body with 316 Stainless Steel Trim (Example: 7562-2)
Note: Stainless Steel available. See Stainless Steel Price Sheet for listing price.
The series 7800 Gruvlok Check Valve comes standard with cast ductile iron body, stainlees steel seat ring, hinge pin and closure spring.Clapper seat facing of grade “E” EPDM or grade “T” (buna) Elastomer.NPT plugs in the body accomodate valve drain-down.
SIZE (INCHES) LIST PRICE14 $7,546.1416 $10,285.1818 $13,576.4820 $17,846.1624 $22,500.62
Grooved Dual Disk Check Valve Fig. CV890
Orders for items in shaded areas cannot be canceled or returned.
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com Revised:30
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
NOMINAL PIPE SIZE (INCHES)
LENGTH (INCHES)
GROOVED END INLET X FLANGE
ADAPTER OUTLET
APRX. WEIGHT
EACH (LBS)PRICE EACH
PAINTEDBOX QTY.
2 ½ x 2½ 2½ x 2½ 36.00 $4,888.19 -
3
x 2 3 x 2 36.00 $4,073.58 -x 2½ 3 x 2½ 36.00 $2,929.31 -
x 3 3 x 3 37.00 $2,968.00 -
4
x 2 4 x 2 38.00 $3,721.66 -x 2½ 4 x 2½ 38.00 $3,217.10 -
x 3 4 x 3 38.00 $3,470.44 -x 4 4 x 4 72.00 $4,020.05 -
5x 4 5 x 4 74.00 $4,480.62 -x 5 5 x 5 75.00 $4,705.87 -
6
x 3 6 x 3 72.00 $5,775.94 -x 4 6 x 4 72.00 $4,776.89 -x 5 6 x 5 74.00 $5,711.81 -x 6 6 x 6 133.00 $5,931.23 -
8
x 5 8 x 5 118.00 $6,083.87 -x 6 8 x 6 118.00 $6,415.12 -x 8 8 x 8 190.00 $11,037.25 -
10
x 6 10 x 6 100.00 $11,458.60 -x 8 10 x 8 203.00 $12,452.35 -
x 10 10 x 10 192.00 $15,003.24 -
12
x 8 12 x 8 196.00 $15,710.26 -x 10 12 x 10 196.00 $17,759.77 -x 12 12 x 12 382.00 $24,699.06 -
14
x 10 14 x 10 382.00 $20,576.19 -x 12 14 x 12 382.00 $22,985.04 -x 14 14 x 14 467.00 $22,984.51 -
16 x 14 16 x 14 467.00 $28,727.06 -
Suction Diffuser Fig. 7250
All fabricated steel.The Fig. 7250 Gruvlok Suction Diffuser comes standard with type 304 stainless steel diffuser and pre-filter screen, ductile or malleable iron access cap and coupling with Grade “E” EPDM gasket, and plated bolts and nuts. NPT taps and plugs are provided in the body to accommodate drain and gauges.
SIZE (INCHES) LIST PRICE3 x 2 $4,035.42
3 x 2 ½ $2,901.753 x 3 $2,940.444 x 2 $2,895.39
4 x 2 ½ $3,187.424 x 3 $3,438.644 x 4 $3,981.895 x 3 $5,574.015 x 4 $4,439.285 x 5 $4,662.416 x 3 $4,430.806 x 4 $4,732.376 x 5 $5,658.816 x 6 $5,876.118 x 5 $6,026.638 x 6 $6,355.238 x 8 $10,934.43
10 x 6 $11,351.5410 x 8 $12,336.28
10 x 10 $14,862.7912 x 8 $15,562.92
12 x 10 $17,593.3512 x 12 $24,468.5114 x 10 $18,056.0414 x 12 $20,170.2114 x 14 $24,493.4216 x 14 $25,208.39
Groove x Flange ANSI Suction Diffuser Fig. S810
Orders for items in shaded areas cannot be canceled or returned. Gr
oove
d-En
dCo
uplin
gsCo
pper
Met
hod
Valve
s and
Acce
ssor
iesFit
tings
Plai
n-En
dSp
are P
arts
Tool
sSS
Fitti
ngs a
nd
coup
lings
Spec
ialty
Fit
tings
Grooved-End
CouplingsCopper M
ethodValves and
AccessoriesFittings
Plain-EndSpare Parts
ToolsSS Fittings and
couplingsSpecialty Fittings
www.anvilintl.comRevised: 31
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised:
Groove x Groove Connectors • Class 150 (AF-21-GG)
Groove x Flange Connectors • Class 150 (AF-21-GF)
Flange x Flange Connectors • Class 150 (AF-21-FF)
Reducing and combination flex connectors available. Contact your Anvil Representative.
3" & 4" have different end to end dimensions.21/2 - 12" have different end to end dimensions.
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Gruvlok Air Vent GAV-15 & GAV-30
GAV-15 GAV-30
Grooved-End Strainer Fig. 7260
The Fig. 7260 Gruvlok Strainer comes standard with type 304 stainless steel strainer screen, ductile iron access cap and coupling with Grade “E” EPDM gasket, and plated bolts and nuts. An NPT tap and plugs are provided in the access cap to accommodate a drain or blow-down valve.Additional sizes available, contact your Anvil Representative for engineering assistance.
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised:
Mechanical Tee Product Fig. 7045Clamp-T® Female Threaded Outlet
Mechanical Tee Product Fig. 7046Clamp-T® Grooved Outlet
Fig. 7045 (U-Bolt)
Clamp T’s are available with grooved or female threaded outlet with Grade E or Grade T gasket. Weights are approximate and subject to change.* All bolts and nuts are of track head design and are zinc plated conforming to
physical properties of ASTM B-633.** Clamp-T supplied with U-Bolt lower housing.*** Note: 8 x 2 is actually 8 x 2 1/2 bushed down.
Clamp T’s are available with grooved Grade E or Grade T gasket.Weights are approximate and subject to change.* All bolts and nuts are of track head design and are zinc plated conforming to physical
properties of ASTM B-633.** Clamp-T supplied with U-Bolt lower housing.
Clamp-T® OutletsC US
For listing/approval details contact your Gruvlok Representative.
C US
For listing/approval details contact your Gruvlok Representative.
NOMINAL PIPE
SIZE RUN (INCHES)
OUTLET (INCHES)
APRX. WEIGHT
EACH (LBS.)
COMPLETE CLAMP-T FEMALE THREADED OUTLET
E OR T GASKET PRICE EACH *BOLT AND
NUT SIZE (INCHES)PAINTED QTY. GALV.
BOX QTY.
2
x ½** 2.30 $104.41 - $131.97 - ½ U-Boltx ¾** 2.20 $104.41 - $131.97 - ½ U-Boltx 1** 2.07 $104.41 - $131.97 - ½ U-Bolt
x 1¼** 2.80 $120.84 - $149.46 - ½ U-Boltx 1½** 2.56 $120.84 - $150.52 - ½ U-Bolt
2 ½
x ½** 2.60 $104.41 - $131.97 - ½ U-Boltx ¾** 2.50 $104.41 - $131.97 - ½ U-Boltx 1** 1.81 $104.41 - $131.97 - ½ U-Bolt
x 1¼** 2.32 $146.81 - $179.14 - ½ U-Boltx 1½** 2.14 $146.81 - $179.14 - ½ U-Bolt
3
x ½** 2.79 $120.84 - $146.81 - ½ U-Boltx ¾** 2.75 $120.84 - $146.81 - ½ U-Boltx 1** 2.51 $120.84 - $146.81 - ½ U-Boltx 1¼ 4.04 $152.64 - $190.80 - ½ U-Boltx 1½ 3.75 $152.64 - $190.80 - ½ U-Boltx 2 4.04 $175.43 - $217.83 - ½ U-Bolt
4
x ½** 3.21 $152.11 - $180.73 - ½ U-Boltx ¾** 3.17 $152.11 - $180.73 - ½ U-Boltx 1** 3.03 $152.11 - $180.73 - ½ U-Boltx 1¼ 4.44 $178.08 - $209.35 - ½ U-Boltx 1½ 4.40 $184.44 - $232.67 - ½ U-Boltx 2 4.67 $184.44 - $234.26 - ½ U-Bolt
x 2½ 5.15 $192.39 - $249.10 - ½ U-Boltx 3 7.09 $205.11 - $262.88 - ½ U-Bolt
5
x 1¼ 6.34 $186.68 - $307.40 - ½ U-Boltx 1½ 6.20 $225.25 - $285.67 - ½ U-Boltx 2 6.61 $225.25 - $285.67 - ½ U-Bolt
x 2½ 7.24 $237.44 - $302.63 - ½ U-Boltx 3 8.50 $252.81 - $324.36 - ½ U-Bolt
6
x 1¼ 7.04 $192.92 - $319.59 - ½ U-Boltx 1½ 6.86 $231.08 - $295.21 - ½ U-Boltx 2 7.31 $231.61 - $295.21 - ½ U-Bolt
x 2½ 7.80 $248.57 - $321.18 - ½ U-Boltx 3 9.60 $263.41 -- $339.73 - ½ U-Boltx 4 12.98 $292.56 - $380.54 - ½ U-Bolt
NOMINAL PIPE
SIZE RUN (INCHES)
OUTLET (INCHES)
APRX. WEIGHT
EACH (LBS.)
COMPLETE CLAMP-T FEMALE THREADED OUTLET
E OR T GASKET PRICE EACH *BOLT AND
NUT SIZE (INCHES)PAINTED QTY. GALV.
BOX QTY.
8
x 2*** 11.36 $402.27 - $507.21 - ½ U-Boltx 2½ 11.13 $402.27 - $507.21 - ½ U-Boltx 3 12.40 $424.53 - $538.48 - ½ U-Boltx 4 16.00 $437.25 - $564.45 - ½ U-Bolt
NOMINAL PIPE
SIZE RUN (INCHES)
OUTLET (INCHES)
APRX. WEIGHT
EACH (LBS.)
COMPLETE CLAMP-T GROOVED BRANCH* E OR T GASKET
PRICE EACH *BOLT AND NUT SIZE (INCHES)PAINTED QTY. GALV.
BOX QTY.
2 ½** x 1¼ 2.50 $146.81 - $179.14 - ½ U-Boltx 1½ 2.09 $146.81 - $179.14 - ½ U-Bolt
3x 1¼ 3.80 $152.64 - $190.80 - ½ x 2¾x 1½ 3.90 $152.64 - $190.80 - ½ x 2¾x 2 4.12 $175.43 - $217.83 - ½ x 2¾
4
x 1¼ 4.41 $178.08 - $209.35 - ½ x 2¾x 1½ 4.23 $184.44 - $232.67 - ½ x 2¾x 2 4.60 $184.44 - $234.26 - ½ x 2¾
x 2½ 4.68 $192.39 - $249.10 - ½ x 2¾x 3 6.75 $205.11 - $262.88 - ½ x 3½
5
x 1¼ 5.70 $221.54 - $307.93 - 5/₈ x 3¼x 1½ 5.30 $225.25 - $295.21 - 5/₈ x 3¼x 2 6.40 $225.25 - $285.67 - 5/₈ x 3¼
x 2½ 6.80 $237.44 - $313.76 - 5/₈ x 3¼x 3 8.40 $252.81 - $324.36 - 5/₈ x 3¼
6
x 1¼ 7.66 $231.61 - $295.21 - 5/₈ x 4¼x 1½ 7.17 $231.61 - $295.21 - 5/₈ x 4¼x 2 7.13 $231.61 - $295.21 - 5/₈ x 4¼
x 2½ 7.85 $252.81 - $321.18 - 5/₈ x 4¼x 3 8.37 $263.41 - $339.73 - 5/₈ x 4¼x 4 10.11 $292.56 - $380.54 - 5/₈ x 4¼
8
x 2 11.00 $402.27 - $528.94 - ¾ x 4¼x 2½ 10.58 $402.27 - $507.21 - ¾ x 4½x 3 12.20 $424.53 - $538.48 - ¾ x 4½x 4 13.20 $437.25 - $564.45 - ¾ x 4½
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com Revised:34
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Mechanical Tee ProductClamp-T® Cross Fig. 7047, Fig. 7048 and Fig. 7049
Fig. 7047 – Thread x Thread Fig. 7048 – Groove x Groove
NOMINAL PIPE SIZE RUN
(INCHES) AOUTLET
(INCHES) B
COMPLETE CLAMP-T CROSS WITH "E" OR "T" GASKET
PRICE EACHBOX QTY.PAINTED GALV.
5
1½ x 1½ $334.96 $424.53 -
2 x 1½ $352.98 $424.53 -2 x 2 $334.96 $424.53 -
2½ x 1½ $352.98 $449.97 -2½ x 2 $352.98 $484.42 -
2½ x 2½ $352.98 $449.97 -3 x 1½ $377.36 $484.42 -3 x 2 $377.36 $484.42 -
3 x 2½ $377.36 $484.42 -3 x 3 $377.36 $484.42 -
6
1½ x 1½ $342.91 $441.49 -2 x 1½ $342.91 $441.49 -2 x 2 $357.22 $476.47 -
2½ x 2½ $367.82 $476.47 -3 x 2½ $393.79 $504.56 -3 x 3 $393.79 $504.56 -
4 x 2½ $435.13 $564.45 -4 x 3 $435.13 $564.45 -4 x 4 $435.13 $564.45 -
8
2½ x 2½ $601.55 $758.96 -3 x 2½ $632.82 $804.01 -3 x 3 $632.82 $804.01 -
4 x 2½ $654.55 $845.35 -4 x 3 $654.55 $845.35 -4 x 4 $654.55 $845.35
Fig. 7049 – Groove x Thread
*Avaiable with Female Threaded outlet only.Always specify gasket grade when ordering.
C US
For listing/approval details contact your Gruvlok Representative.
NOMINAL PIPE SIZE RUN
(INCHES) AOUTLET
(INCHES) B
COMPLETE CLAMP-T CROSS WITH “E” OR “T” GASKET
PRICE EACH
BOX QTY.PAINTED GALV.
2 ½
1 x 1* $165.36 $210.94 -
1 x 1¼* $225.78 $292.03 -1 x 1½* $225.78 $292.03 -
1¼ x 1¼* $225.78 $292.03 -1½ x 1¼* $225.78 $292.03 -1½ x 1½* $225.78 $241.68 -
3
1 x 1* $184.44 $237.44 -1 x 1¼ $225.78 $225.78 -1 x 1½ $225.78 $281.43 -1 x 2 $260.76 $322.77 -
1¼ x 1 $225.78 $281.43 -1¼ x 1¼ $225.78 $281.43 -1½ x 1¼ $225.78 $281.43 -1½ x 1½ $225.78 $281.43 -2 x 1¼ $260.76 $322.77 -2 x 1½ $260.76 $322.77 -2 x 2 $260.76 $322.77 -
4
1 x 1 $225.78 $293.09 -1 x 1¼ $274.54 $346.09 -1 x 1½ $293.09 $343.97 -1 x 2 $293.09 $346.09 -
1¼ x 1 $274.54 $346.09 -1¼ x 1¼ $274.54 $343.97 -1½ x 1¼ $274.54 $343.97 -1½ x 1½ $274.54 $343.97 -2 x 1¼ $293.09 $346.09 -2 x 1½ $293.09 $346.09 -2 x 2 $293.09 $347.15 -
2½ x 2½ $293.09 $373.12 -3 x 1½ $305.81 $394.85 -3 x 3 $305.81 $394.85 -
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: 35
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
All bolts are oval-neck track head design to ASTM A-183, with heavy hex nuts to ASTM A-563, and are zinc plated to ASTM B-633.Weights are approximate and subject to change.Plain End Fittings are manufactured from fabricated steel.Other sizes available. Priced on application.
For listing/approval details contact your Gruvlok Representative.
Roughneck™ Plain-End Products
NOMINAL PIPE SIZE RUN (INCHES) OUTLET (INCHES)"E" OR "T" GASKET (GASKET ONLY)
PRICE EACH BOX QTY.2–2½ x ½–1 $25.44
2–2½ x 1¼–1½ $25.443–4 x ½–1½ $25.443–8 x 2 $25.444–5 x 2½ $29.154–8 x 3 $31.805–6 x 1¼–1½ $25.446–8 x 2½ $30.746–8 x 4 $42.40
NOMINAL PIPE SIZE (INCHES)
PIPE OUTSIDE
DIAMETER (INCHES)
APRX. WEIGHT
EACH (LBS.) PAINTED GALV. BOX QTY.
PLATED BOLT AND NUT SIZE (INCHES)
2 2.375 6.58 $235.32 $303.69 - 5/8 x 3¼2 ½ 2.875 7.35 $235.32 $303.69 - 5/8 x 3¼
3 3.500 10.56 $343.97 $449.44 - ¾ x 4½4 4.500 13.97 $396.97 $526.29 - ¾ x 4½5 5.563 23.75 $564.45 $749.42 - 7/8 x 56 6.625 28.00 $688.47 $933.33 - 1 x 68 8.625 36.80 $1,213.17 $1,622.33 - 7/8 x 5
10 10.750 40.00 $1,574.63 $2,114.17 - 1 x 6½12 12.750 56.00 $1,976.37 $2,724.73 - 1 x 6½14 14.000 88.00 $2,712.54 $3,520.79 - 1 x 6½16 16.000 95.00 $3,711.06 $4,735.55 - 1 x 6½
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com Revised:38
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised:
Red-White ValvesHydronic Hook-up KitsThe following components are used in hydronic hook-up kits.
Red-White Valve Hook-up Kits integrate the components required to connect piping to hydronic heating system or chiller system equipment. These kits are configured to the system designer's specifications.
ABV-9900 Series Automatic Balancing Valves
Hydronic Hook-up Kit - Accessories
92HS24" 36"
½ $56.71 $65.72¾ $99.11 $119.251 $172.25 $201.93
1 ¼ $267.12 $325.421 ½ $321.18 $352.98
2 $458.98 $498.73
MANOMETERPOA
MBV-9510 Series Fixed Orifice Static Balancing Valves
MBV-9510 Series Fixed Orifice Static Balancing Valves
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Revised:
Adapter NipplesFigs. 7080, 7081, and 7082
Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6" and smaller are made from Schedule 40 pipe; for nominal sizes 8" and larger, from Schedule 30 pipe. For Galvanized or Zinc Plated pricing, add 50% to list price.Special lengths and heavier wall thickness nipples are priced on application.Adapters not shown are available from JB Smith; contact Anvil for availability.
Steel Swaged NipplesFigs. 7077, 7078, and 7079
Made of carbon steel conforming to ASTM A106.
Fig. 7077GR x GR
Fig. 7078GR x THD
Fig. 7079GR x BEV
Fig. 7080 GR x GR
Fig. 7081GR x MPT
Fig. 7082GR x BEV
C US
For listing/approval details contact your Gruvlok Representative.
C US
For listing/approval details contact your Gruvlok Representative.
Adapter Nipples, Plain EndFigs. 7080P, 7081P, and 7082P
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Lateral Fig. 7069P
Plain-End Fittings are manufactured from fabricated steel. Other sizes available. Priced on application. Plain-End Fittings (For use with 7005 Coupling only)
Plain-End Fittings (For use with Fig. 7005 Coupling only)
90° Long Radius Elbows Fig. 7050LRP
90° Elbows Fig. 7050P
45° Elbows Fig. 7051P
45° Long Radius Elbows Fig. 7051LRP
Tee Fig. 7060P
Cross Fig. 7068P
Plain-End Fittings are manufactured from fabricated steel. Other sizes available. Priced on application. Plain-End Fittings (For use with 7005 Coupling only)
Plain-End Fittings are manufactured from fabricated steel. Other sizes available. Priced on application. Plain-End Fittings (For use with 7005 Coupling only)
True WYE Fig. 7071P
Bull Plug Fig. 7075P
Plain-End Fittings are manufactured from fabricated steel. Other sizes available. Priced on application. Plain-End Fittings (For use with 7005 Coupling only)
Rigid Coupling 316 SS with Grade “EN” or Grade “T” Nitrile Tri-Seal Gasket Fig. 472
Flexible Coupling 316 SS with Grade “EN” or Grade “T” Gasket Fig. 405
Orders for items in shaded areas cannot be canceled or returned.
Orders for items in shaded areas cannot be canceled or returned.
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.com Revised:48
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Flange Adapter Fig. 7084SS
Orders for items in shaded areas cannot be canceled or returned.
Stainless Steel Fittings & Couplings
Figure 7400SS Rigidlite™ Type 316 Stainless Steel Couplings
All bolts are hex head design Type 316 Grade B-8M Class 1 stainless steel to ASTM A-193. Type 316 Grade 8M stainless steel heavy hex nuts, conforming to ASTM A-194.Weights are approximate and subject to change.
NOMINAL PIPE SIZE (INCHES)
PIPE OUTSIDE DIAMETER (INCHES )
APPROX. WEIGHT
EACH (LBS) QTY
COUPLING COMPLETE WITH
“EP” OR “T” GASKET (PRICE EACH)
COUPLING COMPLETE WITH
“O” GASKET (PRICE EACH)
BOLTS & NUTS
QTYSIZE
(INCHES)1 ¼ 1.660 1.43 40 $288.32 $746.77 2 ³/₈ x 2¼1 ½ 1.900 1.69 35 $289.38 $793.94 2 ³/₈ x 2¼
2 2.375 2.10 28 $323.30 $721.86 2 ³/₈ x 2¼2 ½ 2.875 2.37 25 $355.10 $816.73 2 ³/₈ x 2¼
3 3.500 3.10 18 $396.44 $908.42 2 ½ x 2¾4 4.500 4.40 12 $499.79 $1,350.44 2 ½ x 2¾6 6.625 7.62 6 $1,152.75 $2,299.67 2 ¾ x 38 8.625 12.83 4 $2,401.43 $3,773.60 2 ¾ x 3
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
NOMINAL PIPE SIZE (INCHES) SCH 10, 304 SS SCH 10, 316 SS
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: Revised: 51
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Eccentric Reducer Fig. 7073SS
SIZE (INCHES)
SCH 10, 304 SS SCH 10, 316 SS
DOMESTIC GLOBAL DOMESTIC GLOBAL
7073SS-1004 A7073SS-1004 7073SS-1016 A7073SS-10161¼ x 1 1,681.16 $1,681.16 $1,875.67 $1,875.67
Orders for items in shaded areas cannot be canceled or returned. Some sizes available in Schedule 40 - these orders cannot be canceled or returned. Contact your Sales Representative for more information.
SIZE (INCHES) LIST PRICE1 ½ $1,026.08
2 $1,207.342 ½ $2,092.97
3 $2,812.714 $4,471.61
SIZE (INCHES) LIST PRICE2 $1,518.45
2 ½ $1,870.9076.1 mm $1,870.90
3 $1,953.054 $2,330.41
165.1 mm $4,385.226 $4,385.22
Stainless Steel Grooved Butterfly Valve EPDM or Nitrile Lever Operator Fig. B480
Orders for items in shaded areas cannot be canceled or returned.
When requesting a quotation or placing an order, please complete the following form and fax a copy to 717-684-2131 to the attention of Customer Service:
1) Size and material of pipe to which the expansion joint will be connected:___________________________2) Factory to preset the Expansion Joint to:______Full Expansion_______Full Contraction______Intermediate3) Total overall movement while in service:___________inches4) Pipe material for Expansion Joint (standard is Sch. 40 steel):_____________________________________5) Finish on pipe (standard is black):__________________________________________________________6) Finish on couplings (standard is painted):____________________________________________________7) Gasket material (standard is Grade E EPDM):_________________________________________________8) Connecting pipe ends if different than standard roll or cut groove:_________________________________9) Are there any silicone restrictions for the application?_________Yes _________No
Fig. 7240 Expansion Joints
Expansion Joints for Grooved-End Pipe
Groo
ved-
End
Coup
lings
Copp
er M
etho
dVa
lves a
ndAc
cess
ories
Fittin
gsPl
ain-
End
Spar
e Par
tsTo
ols
SS Fi
tting
s and
co
uplin
gsSp
ecia
lty
Fittin
gs
Grooved-EndCouplings
Copper Method
Valves andAccessories
FittingsPlain-End
Spare PartsTools
SS Fittings and couplings
Specialty Fittings
www.anvilintl.comRevised: 54
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
Cross ReferenceDESCRIPTION VICTAULIC® GRUVLOK®
Rigidlok Coupling 07 7401
SlideLOK Rigid Coupling 107N 74/7402
Rigidlite Stainless Steel Coupling 08 7400 SS
90° Elbows 10 7050
3D Long Radius 90° Elbows 10-3D 7050-3D
5D Long Radius 90° Elbows 10-5D 7050-5D
6D Long Radius 90° Elbows 10-6D 7050-6D
90° Elbow 10-P 7050P
Reducing Base Support Elbows Grooved and Flanged (G x F)
R-10F 7050RF
45° Elbows 11 7051
3D Long Radius 45° Elbows 11-3D 7051-3D
5D Long Radius 45° Elbows 11-5D 7051-5D
6D Long Radius 45° Elbows 11-6D 7051-6D
45° Elbow 11-P 7051-P
22¹/₂° Elbows 12 7052
3D Long Radius 22¹/₂° Elbows 12-3D 7052-3D
5D Long Radius 22¹/₂° Elbows 12-5D 7052-5D
6D Long Radius 22¹/₂° Elbows 12-6D 7052-6D
11¹/₄° Elbow 13 7053
3D Long Radius 11¹/₄° Elbows 13-3D 7053-3D
5D Long Radius 11¹/₄° Elbows 13-5D 7053-5D
6D Long Radius 11¹/₄° Elbows 13-6D 7053-6D
3D Long Radius 60° Elbows 14-3D 7057-3D
5D Long Radius 60° Elbows 14-5D 7057-5D
6D Long Radius 60° Elbows 14-6D 7057-6D
3D Long Radius 30° Elbows 15-3D 7058-3D
5D Long Radius 30° Elbows 15-5D 7058-5D
6D Long Radius 30° Elbows 15-6D 7058-6D
90° Adapter Elbows 18 7055
45° Adapter Elbows 19 7056
Tees 20 7060
Tee 20-P 7060P
Type 316 Stainless Steel Tees 20SSLT, 20-SSSW 7060-SS16
DESCRIPTION VICTAULIC® GRUVLOK®
Bullhead Tee 21 7062
Header Tee 22 ES 7022
Cross Tee 35 7068
Reducing Tee 25 7061
Fabricated Steel Reducing Tees 25-P 7061P
Type 316 Stainless Steel Reducing Tee 25-SS 7061-SS16
Standpipe Tee 27 7065
Tees With Threaded Branch* 29M 7063
Reducing Tee With Threaded Branch 29T 7064
Lateral 30 7069
Lateral 30-P 7069P
Reducing Lateral 30R 7070
Tee WYE 32 7066
Reducing Tee WYE 32R 7067
90° True WYE 33 7071
True WYE 33-P 7071P
Cross 35 7068EG
Cross 35-P 7068P
Adapter Nipple – (Gr x MPT) 40 7081F
Seamless Adapter Nipples (Gr x MPT) 40 7081
Flanged Adapter (125 Ib) 41 7083
Adapter Nipple – (Gr x Bev) 42 7082F
Seamless Adapter Nipples (Gr x Bev) 42 7082
Adapter Nipple – (Gr x Gr) 43 7080F
Seamleass Adapter Nipples (Gr x Gr) 43 7080
Flanged Adapter (150 lb) 45 7084
Flanged Adapter (300 lb) 46 7085
DI–Electric Nipple (Gr x Th) 47 7088
DI–Electric Nipple (Gr x Gr) 47 7089
DI–Electric Nipple (Th x Th) 47 7090
www.anvilintl.com Revised: 55
STANDARD PRODUCTS Price ListEffective Date: September 4, 2018 | Replaces Prior Date: April 2018 | Sheet # GR.STD-9.18
DESCRIPTION VICTAULIC® GRUVLOK®
Hose Nipple 48 7086
Concentric Reducer (Gr x Gr) 50 7072
Concentric Reducer (Gr x Flg) 7072GF
Concentric Reducers 50-SSLT 7072-SS16
Eccentric Reducer 51 7097
Eccentric Reducers 51-SSLT 7073-SS16
Reducer Threaded Small End 52 7076
Steel Swaged Nipple 53 7077
Steel Plain End Swaged Nipple 53-P 7077P
Steel Swaged Nipple 54 7078
Steel Swaged Nipple 55 7079
Cap 60 7074
Type 316 Stainless Steel Cap 60-SS 7074-SS16
Bullhead Plug 61 7075
Bull Plug 61-P 7075P
Extra Heavy “EG” End Guard Fittings 90° Elbow 62 ES 7050 EG
Extra Heavy “EG” End Guard Fittings 45° Elbow 63 ES 7051 EG
Extra Heavy “EG” End Guard Fittings Tee 64 ES 7060 EG
Outlet Coupling 72 i7042
Lightweight Coupling 75 7000
Flexible Coupling 77 7001
Hingelok Coupling 78 7003
Female Thread Adapter 80 7087
Roughneck Coupling 99 7005
HDPE Flange Adapter 994 7312
Gruvlok HDPE Coupling 995 7305
Transition Coupling 997 7307
90° Long Radius Elbows 100 7050 LR
Type 316 Stainless Steel 90° Elbow 100-SS 7050-SS16
Type 316 Stainless Steel Long Radius Long Tangent 90° Elbow