-
SL NO.
DESCRIPTION OF ITEM UNIT QTY. RATE(in Rs) AMOUNT
1
8 Mtr. Long 200 Kgs. P.C.C. Pole with R.C.C. Base Plate /Pad
inearth including excavation,refilling and ramming etc. as required
(1/6th length of the pole to be embeded in earth), including
carryingof the materials from Gomati factory stack yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Engg-In-Charge.
Nos. 55
2
8 Mtr. Long S.T. Pole of Designation
410SP-15(IS2713,PtI,II,III,1980) with base plate direct in earth
includingexcavation, refilling and ramming etc, as required (1/6th
length ofthe pole to be embeded in earth ) and grouting with CC of
ratio1:2:4 (1 Cement, 2 River Sand and 4 jhamabrick aggregate of
20mm nominal size) including supply of cement,aggregate
completewith excavation, refilling of earth, ramming alongwith
centeringand shuttering as required @ 0.273 Cum per S.T. Pole as
perTSECL specification )etc. and applying paints with ready
mixedprimer (2 or more Coats ) and almunium paints of approved
qualityto give an even shade etc, including carrying of the
materials fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
Nos. 51
3
Stringing & sagging of 1.1 K.V. L.T. AB Cable on P.C.C.
poleaverage span of 25 m to 40 m with fixing of Nylon Cable tie to
betied every 2 mtr interval of AB Cable with fixing of End caps at
allopen ends of AB Cable -1X25+1X16+1x25 SQMM ( insulatedmessanger)
AB Cable, including carrying of the materials fromGomati RE-DDUGJY
Store yard to work site by mechanicaltransport/hand cart/manual
carrying including loading, unloadingand stacking as required, as
per direction of Engg-In-Charge.
KM 4
4
Erection of anchor Clamp suitable for AB Cable of 25/16
sq.mm.insulated Massenger , including errection of G.I. Pole clamp,
G.I.Flat type Eye Hook, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
Nos. 63
5
Erection of Suspension clamp suitable for.insulated
Massenger,including errection of G.I. Pole clamp, G.I. Flat type
Eye Hook,including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Engg-In-Charge.
Nos. 106
6
Erection of insulating Piercing connectors for connection
ofDistribution Boxes including connection with AB Cable,
includingcarrying of the materials from Gomati RE-DDUGJY Store yard
towork site by mechanical transport/hand cart/manual
carryingincluding loading, unloading and stacking as required, as
perdirection of Engg-In-Charge.
Nos. 508
PRICE SCHEDULE
A. ERECTION CHARGE FOR DRAWAL OF LT AB CABLE (1X25+1X16+1x25
SQMM)
Erection of Materials Including Carrying.
Name of Work : Execution of HT/LT Lines, installation of
Distribution Sub Station and providing BPL ServiceConnection at
Tepania Block in Gomati District under RE-DDUGJY Scheme.
65
-
7
Erection of Insulating Piercing Connectors for ABC teeConnection
including Connection with AB Cable, includingcarrying of the
materials from Gomati RE-DDUGJY Store yard towork site by
mechanical transport/hand cart/manual carryingincluding loading,
unloading and stacking as required, as perdirection of
Engg-In-Charge.
Nos. 106
8
Erection of distribution box on pole by 2 Nos Steel strap &
buckles/ G.I. Clamp, including carrying of the materials from
Gomati RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Engg-In-Charge.
Nos. 106
9
Erection of preinstalled Water proof crymping type sleeves
forStraight through joints, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
Nos. 13
10
Erection of Bimetalic Crymping Type Waterproof lug
for16/50/70/35mm L.T. Power cables (1 set=4 Nos.),
includingcarrying of the materials from Gomati RE-DDUGJY Store yard
towork site by mechanical transport/hand cart/manual
carryingincluding loading, unloading and stacking as required, as
perdirection of Engg-In-Charge.
Nos. 8
11
Erection of L.T.Stay set completewith rod, plate, straining
screwthimble guy insulator as per IS specification including
fastenedwith hot dip (heavy duty galvanised stranded wire of
size7/2.50mm alongwith stay clamps ,Nuts & bolts etc. as
required andgrounding stay set with CC of ratio 1:2:4 (1 Cement,2
Riversand 4jhamabrick aggregate of 20mm nominal size )i/c supply of
cement,sand and brick aggregate complete with excavation ,
refilling ofearth ramming alongwith centering and shuttering as
required (@0.119Cu.m per stay set as per TSECL specification,
includingcarrying of the materials from Gomati RE-DDUGJY Store yard
towork site by mechanical transport/hand cart/manual
carryingincluding loading, unloading and stacking as required, as
perdirection of Engg-In-Charge.
Nos. 34
12 Pole numbering with Black Colour on yelow shade as required
digit as per direction of Engg-In-Charge.
Nos. 106
13Supply of Pole Clamp (50x8 mm) on existing pole with MS
Clampand Nuts & bolts (suitable for Eye Hook) . Make : 3-M,
AxisElectrical Componants (I) Pvt. Ltd. , Raychem RPG.
Nos. 106
14Supply of Galvanised Steel made Eye Hook with Hot
dipGalvanised Nuts & bolts (suitable for reqired Cable size).
Make : 3-M, Axis Electrical Componants (I) Pvt. Ltd. , Raychem
RPG.
Nos. 106
SL NO.
Description of item Quantity Unit Unit Rate in Rs.Amount
in Rs.
1
8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad inearth
including excavation, refilling and ramming etc. as required(1/6th
length of the pole to be embedded in earth),includingcarrying of
the materials from factory stack yard of Gomati districtto work
site by mechanical transport/hand cart/manual carryingincluding
loading, unloading and stacking as required
126 Nos.
B. ERECTION CHARGE FOR CONSTRUCTION OF 1 PHASE - 2 WIRE L.T .
LINE ON 8
Erection of Materials Including Carrying.
Total
66
-
2
8 M long Steel Tubular poles of Designation 410 SP 15 (IS
2713,Pt I, II, III 1980) with base plate direct in earth
includingexcavation, refilling and ramming etc. as required (1/6th
length ofthe pole to be embedded in earth) and grouting with CC of
ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20
mm.nominal size) i/c supply of cement, sand and brick
aggregatecomplete with excavation, refilling of earth, ramming
alongwithcentering and shuttering as required (@ 0.273 Cum per
SteelTubular Pole as per TSECL specification ) etc. and applying
paintswith ready mixed primer (two or more coats) and alluminium
paintof approved quality to give an even shade etc.
asrequired,including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge.
117 Nos.
3
Galvanised Stay set complete with rod, plate , straining
screw,thimble, guy insulator as per IS specification including
fastenedwith hot dip (heavy duty) galvanized stranded wire of size
7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required
andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2
riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c
supplyof cement, sand and brick aggregate complete with
excavation,refilling of earth, ramming alongwith centering and
shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL
specification).including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
117 Set
4
ACSR Conductors (6/1/2.59mm) Weasel with Jointing
sleeves,binding materials etc as required as per technical
specification,approved drawings and scope of work,including
carrying of thematerials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
19 KM
5
8 SWG GI Wire for continuous earthing of L.T. Line, as
pertechnical specification, approved drawings and scope of
workincluding craddle gaurding with fitting, fixing by reel
insulator andincluding carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
1264 KG
6
Erection of anti climbing devices viz barbed wires on
polestructures in helical form(1.5kg per pole), including carrying
of thematerials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
243 NO.
7
Erection of porcelein shackle insulator for LT system with GI
UClamps and required assorted nuts and bolts, washers etc.including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Eng-In-Charge.
486 Nos.
8
40 mm dia., 2500 mm long GI pipe earth electrode with test
link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt
andother accessories complete as per technical specifications for
LTOverhead line's every 5th pole earthing and line structure
earthingas per approved drawings, specification and scope of
work.including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Eng-In-Charge.
49 Set
67
-
9
C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle)
includingfastened with galvanised Clamps and Nuts & Bolts etc.
asrequired. Including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge.
146 Nos.
10
L.T Danger Plate(57/1988), on single/double pole structure at
aheight of 4mtr from the GL. Including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
243 No.
11 Pole numbering with Black Colour on yelow shade as
requireddigit as per direction of Engg-In-Charge.
243 Nos.
12Supply of Nuts & Bolts including washer as reqired
Properlygalvanised as per I.S for Erection of LT 1-Ph 2 Wire Line
on PCC& Steel Pole
389 Kg
13 Supply of Reel Insulator(16-25 Sq.mm) 486 Nos.
SL NO.
Description of item Quantity Unit Unit Rate in Rs.Amount
in Rs.
1
8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad inearth
including excavation, refilling and ramming etc. as required(1/6th
length of the pole to be embedded in earth),includingcarrying of
the materials from factory stack yard of Gomati districtto work
site by mechanical transport/hand cart/manual carryingincluding
loading, unloading and stacking as required
11 Nos.
2
8 M long Steel Tubular poles of Designation 410 SP 15 (IS
2713,Pt I, II, III 1980) with base plate direct in earth
includingexcavation, refilling and ramming etc. as required (1/6th
length ofthe pole to be embedded in earth) and grouting with CC of
ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20
mm.nominal size) i/c supply of cement, sand and brick
aggregatecomplete with excavation, refilling of earth, ramming
alongwithcentering and shuttering as required (@ 0.273 Cum per
SteelTubular Pole as per TSECL specification ) etc. and applying
paintswith ready mixed primer (two or more coats) and alluminium
paintof approved quality to give an even shade etc. as
requiredincluding carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
10 Nos.
3
Galvanised Stay set complete with rod, plate , straining
screw,thimble, guy insulator as per IS specification including
fastenedwith hot dip (heavy duty) galvanized stranded wire of size
7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required
andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2
riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c
supplyof cement, sand and brick aggregate complete with
excavation,refilling of earth, ramming alongwith centering and
shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL
specification),including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
10 Set
Total
C. ERECTION CHARGE FOR CONSTRUCTION OF 3-PHASE -4-WIRE ON 8 Mtr.
PCC/
Erection of Materials Including Carrying.
68
-
4
ACSR Conductors (6/1/2.59mm) Weasel with Jointing
sleeves,binding materials etc as required as per technical
specification,approved drawings and scope of work, including
carrying of thematerials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
3 KM
5
8 SWG GI Wire for continuous earthing of L.T. Line, as
pertechnical specification, approved drawings and scope of
workincluding craddle gaurding with fitting, fixing by reel
insulatorincluding carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
111 KG
6
Erection of anti climbing devices viz barbed wires on
polestructures in helical form(1.5kg per pole), including carrying
of thematerials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
21 Nos.
7
Erection of porcelein shackle insulator for LT system with GI
UClamps and required assorted nuts and bolts, washers etc.including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Eng-In-Charge.
85 No.
8
40 mm dia., 2500 mm long GI pipe earth electrode with test
link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt
andother accessories complete as per technical specifications for
LTOverhead line's every 5th pole earthing and line structure
earthingas per approved drawings, specification and scope of
work.including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Eng-In-Charge.
4 Set
9
C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle)
includingfastened with galvanised Clamps and Nuts & Bolts etc.
asrequired. including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge.
13 Nos.
10
L.T Danger Plate(57/1988), on single/double pole structure at
aheight of 4mtr from the GL.including carrying of the materialsfrom
Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
21 Nos.
11 Pole numbering with Black Colour on yelow shade as
requireddigit as per direction of Engg-In-Charge.
21 Nos.
12Supply of Nuts & Bolts including washer as reqired
Properlygalvanised as per I.S for Erection of LT 1-Ph 2 Wire Line
on PCC& Steel Pole
46 Kg
13 Supply of Reel Insulator(16-25 Sq.mm) 43 Nos.
SL No.
Description of materials Quantity Unit Rate (in Rs.) Amount (in
Rs.)
1
Erection of 9 Mtr PCC pole with RCC Base plate/pad,
includingcarrying of the materials from Gomati factory stack yard
to worksite by mechanical transport/hand cart/manual carrying
includingloading, unloading and stacking as required, as per
direction ofEng-In-Charge.
96 Nos.
TotalD. ERECTION CHARGE FOR 3 PHASE 11KV LINE ON P.C.C. &
STEEL POLE WITH ACSR WEASEL
Erection Charge
69
-
2
9 M long Steel Tubular poles with welded steel base plate
ofDesignation 540 SP 52 (IS 2713, Pt I, II, III 1980), with base
platedirect in earth including excavation, refilling and ramming
etc. asrequired (1/6th length of the pole to be embedded in earth)
andgrouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4
jhamabrick aggregate of 20 mm. nominal size) i/c supply of cement,
sandand brick aggregate complete with excavation, refilling of
earth,ramming alongwith centering and shuttering as required (@
0.273Cum per Steel Tubular Pole as per TSECL specification ) etc.
andapplying paints with ready mixed primer (two or more coats)
andalluminium paint of approved quality to give an even shade etc.
asrequired including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge.
40 Nos.
Erection of Cross arms made of 100 x 50 x 50 x 6 mm M.S.Channel
i/c. fastened with galvanised clamps and N&B etc. asrequired
duly galvanised as per relevant I.S. Including carrying ofthe
materials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.(a) Single pole top bracket 0.3 mtr. Long 79 Nos.b)
Double pole cross-arm 2.20 mtr. Long 28 Nos.
4
V-cross-arm made of 75x40x40x6 mm Ms channel dulygalvanised as
per relevant I.S.i/c. fastened with galvanised clampsand N&B
etc. as required including carrying of the materials fromGomati
RE-DDUGJY Store yard to work site by mechanicaltransport/hand
cart/manual carrying including loading, unloadingand stacking as
required, as per direction of Eng-In-Charge.
79 Nos.
5
Single Pole protective guard bracket 1.6mtr. Long by 65x65x6
mmM.S.Angle duly galvanised as per relevant I.S.i/c. fastened
withgalvanised clamps and N&B etc. as required Including
carrying ofthe materials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
74 Nos.
6
Double pole guard bracket, 2.5 mtr. Long by 65x65x6mm M.S.Angle
duly galvanised as per relevant I.S.i/c. fastened withgalvanised
clamps and N&B etc. as required Including carrying ofthe
materials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
34 Nos.
Double Pole Cross bracing made of 65 x 65 x 6 mm M.S. Angleduly
galvanised as per relevant I.S.i/c. fastened with galvanisedclamps
and N&B etc. as required Including carrying of thematerials
from Gomati RE-DDUGJY Store yard to work site bymechanical
transport/hand cart/manual carrying including loading,unloading and
stacking as required, as per direction of Eng-In-Charge.a) 1.8 mtr
long for horizontal bracing 57 Nos.
(b) 3.2 mtr long for cross bracing 57 Nos.
3
7
70
-
8
Galvanised Stay set complete with rod, plate , straining
screw,thimble, guy insulator as per IS specification including
fastenedwith hot dip (heavy duty) galvanized stranded wire of size
7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required
andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2
riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c
supplyof cement, sand and brick aggregate complete with
excavation,refilling of earth, ramming alongwith centering and
shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL
specification),including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
79 Set
9
11 KV 45 KN Polimeric Disc Insulator with hardware
fittings,including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
187 Set
10
11KV Polimeric insulator, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
311 Set
11
ACSR Conductors (6/1/2.59mm) Weasel / Rabbit with
Jointingsleeves, binding materials etc as required as per
technicalspecification, approved drawings and scope of work,
includingcarrying of the materials from Gomati RE-DDUGJY Store yard
towork site by mechanical transport/hand cart/manual
carryingincluding loading, unloading and stacking as required, as
perdirection of Eng-In-Charge.
17 KM
12
8 SWG GI Wire for cradel guard for road, pond, cherra, river
andhouse etc of 11 KV Line, as per technical specification,
approveddrawings and scope of work, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
6 KM
13
40 mm dia., 2500 mm long GI pipe (ISI marked) earth
electrodewith test link, RCC pit, RCC cover, placed on GI
frame,Charcoal, Salt and other accessories complete as per
technicalspecification, approved drawings and scope of work for
doublepole, including supply of materials and including carrying of
thematerials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
28 Set
14
Spike earthing 20mm dia as per technical specification,
approveddrawings and scope of work for single pole, including
carrying ofthe materials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
74 Nos.
15
Erection of anti climbing devices viz barbed wires on
polestructures in helical form(1.5kg per pole), including carrying
ofthe materials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
147 Nos.
16
Danger Plate(57/1988), on single/double pole structure at a
heightof 4mtr from the GL.including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
102 Nos.
71
-
17
P.G.Clamps, including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge. (for Weasel
& Rabbitconductor)
85 Nos.
18
Fixing of Cross bracing, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
872 Nos.
19Supply of Nuts & Bolts including washer as reqired
Properlygalvanised as per I.S for Erection of 11 KV Line through
weaselconductor (6/1/2.59 mm) on PCC & Steel Pole
170 Kg
SL No.
Description of materials Quantity Unit Rate (in Rs.) Amount (in
Rs.)
1
9 M long Steel Tubular poles of Designation 410 SP 32 (IS
2713,Pt I, II, III 1980) with base plate direct in earth
includingexcavation, refilling and ramming etc. as required (1/6th
length ofthe pole to be embedded in earth) and grouting with CC of
ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20
mm.nominal size) i/c supply of cement, sand and brick
aggregatecomplete with excavation, refilling of earth, ramming
alongwithcentering and shuttering as required (@ 0.273 Cum per
SteelTubular Pole as per TSECL specification ) etc. and applying
paintswith ready mixed primer (two or more coats) and alluminium
paintof approved quality to give an even shade etc, including
carryingof the materials from Gomati RE-DDUGJY Store yard to work
siteby mechanical transport/hand cart/manual carrying
includingloading, unloading and stacking as required, as per
direction ofEng-In-Charge.
8 Nos.
Distribution Transformer with all accessories as per as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Eng-In-Charge.
a) Distribution Transformer, 1- Phase 10 KVA, 11/0.250 KV 4
Nos.
3
M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. includingfastened
with galvanised Clamps and Nuts & Bolts etc. asrequired,
including carrying of the materials from Gomati RE-DDUGJY Store
yard to work site by mechanical transport/handcart/manual carrying
including loading, unloading and stacking asrequired, as per
direction of Eng-In-Charge.
12 Nos.
4
M.S. Channel of size 75x40x40x6mm for 2.8 mtr long
cross-armincluding duly galvanised as per relevant I.S. including
fastenedwith galvanised Clamps and Nuts & Bolts etc. as
required,including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
20 Nos.
TOTALE(1). ERECTION CHARGE FOR INSTALLATION OF 10 KVA 1-PHASE
DISTRIBUTION SUB_ STATION ON STEEL POLE .
Erection of Materials Including Carrying.
2
72
-
5
M.S. angle of size 65x65x6mm for 2.8 mtr long cross-armincluding
duly galvanised as per relevant I.S. including fastenedwith
galvanised Clamps and Nuts & Bolts etc. as required,including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Eng-In-Charge.
20 Nos.
6
M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm
including duly galvanised as per relevant I.S. for DT Baseincluding
fastened with galvanised Clamps and Nuts & Bolts etc.as
required, including carrying of the materials from Gomati RE-DDUGJY
Store yard to work site by mechanical transport/handcart/manual
carrying including loading, unloading and stacking asrequired, as
per direction of Eng-In-Charge.
8 Nos.
7
Galvanised Stay set complete with rod, plate , straining
screw,thimble, guy insulator as per IS specification including
fastenedwith hot dip (heavy duty) galvanized stranded wire of size
7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required
andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2
riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c
supplyof cement, sand and brick aggregate complete with
excavation,refilling of earth, ramming alongwith centering and
shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL
specification),including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Eng-In-Charge.
16 Set
Insulators with hardware fittings, hardware etc as required as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Eng-In-Charge.
a) 11KV Polymeric Disc insulator with Hardware fitting , 12
Set
b) 11KV Polymeric Pin insulator 12 Set
9
ACSR Conductors (6/1/2.59mm) Weasel with Jointing
sleeves,binding materials etc as required as per technical
specification,approved drawings and scope of work, including
carrying of thematerials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
0.2 KM
10
40 mm dia., 2500 mm long GI pipe earth electrode with test
link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt
andother accessories complete as per technical specification,
approveddrawings and scope of work, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
16 Set
11
Erection of anti climbing devices viz barbed wires on
polestructures including supply of barbed wires in helical
form(1.5kgper pole), including carrying of the materials from
Gomati RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge.
8 Nos.
8
73
-
12
Danger Plate(57/1988), on single/double pole structure at a
heightof 4mtr from the GL.including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Eng-In-Charge.
8 Nos.
13
11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type,
GangOperated, AB Switch along with Support Insulators, BaseChannel
down Pipe, Arcing Horns etc. complete as as pertechnical
specifications, scope of works and approved drawings,including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Eng-In-Charge.
4 Set
14
11KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Eng-In-Charge.
4 Set
15
Distribution Class 11KV Polimeric Lightening Arrester for DT
asper technical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Eng-In-Charge.
12 Nos.
16
C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S.Angle),
including fastened with galvanised Clamps and Nuts &Bolts etc.
as required,including carrying of the materials fromGomati
RE-DDUGJY Store yard to work site by mechanicaltransport/hand
cart/manual carrying including loading, unloadingand stacking as
required, as per direction of Engg-In-Charge.
8 Nos.
17
Straining screw holding of DT, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
8 Nos.
18
L.T. Shackle Insulator, with GI Clamps and required assorted
nutsand bolts, washers etc, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
24 Nos.
PVC insulated, PVC sheathed, Aluminium Conductor,
Stranded,unarmoured cable for connection of transformer LV bushing
toDistribution Box as per Scope of work, technical specification
andapproved drawings, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
1C X 35 sqm aluminium conductor cable for Single Phase 10KVA
Distribution Transformer
120 Mtr
19
74
-
20
LT cut(32Amps) out mechanism of single circuit
rewireableporcelain Kit-kat fuse unit of 500V grade as per relevant
ISspecification to be fastened on wooden plank including Supply
&erection of wooden plank (preferably karai wood) of size 12"
X10" X 1.5" for fixing of cut outs with Nuts & bolts as
required tobe erected on the steel tubular/ PCC pole as per
direction ofEngineer-in-charge and including carrying of the
materials fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
4 Nos.
21
Bimetallic Lugs (35 sqmm.) for L.T. Bushing, including
carryingof the materials from Gomati RE-DDUGJY Store yard to work
siteby mechanical transport/hand cart/manual carrying
includingloading, unloading and stacking as required, as per
direction ofEngg-In-Charge.
16 Nos.
22
P.G. Clamp, including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Engg-In-Charge.
12 Nos.
23Pole/DT numbering with Black Colour on yelow shade as
requireddigit as per direction of Engg-In-Charge.
8 Nos.
24Supply of Nuts & Bolts including washer as reqired
Properlygalvanised as per I.S for installation of 10 KVA
DistributionTransformers
60 Kg
25 Supply of Bimetalic Lugs- 35Sq.mm 16 Nos.
26Supply of 32Amps Cut out of 500V grade as per relevant
ISspecification
4 Nos.
SL No.
Description of materials Quantity Unit Rate (in Rs.) Amount (in
Rs.)
1
9 M long Steel Tubular poles of Designation 410 SP 32 (IS
2713,Pt I, II, III 1980) with base plate direct in earth
includingexcavation, refilling and ramming etc. as required (1/6th
length ofthe pole to be embedded in earth) and grouting with CC of
ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20
mm.nominal size) i/c supply of cement, sand and brick
aggregatecomplete with excavation, refilling of earth, ramming
alongwithcentering and shuttering as required (@ 0.273 Cum per
SteelTubular Pole as per TSECL specification ) etc. and applying
paintswith ready mixed primer (two or more coats) and alluminium
paintof approved quality to give an even shade etc. as required as
perdirection of Eng-In-Charge, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
8 Nos.
Distribution Transformer with all accessories as per as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Engg-In-Charge.
a) Distribution Transformer, 1- Phase 16 KVA, 11/0.250 KV 4
Nos.
TOTAL
E(2). ERECTION CHARGE FOR INSTALLATION OF 16KVA 1-PHASE
DISTRIBUTION SUB_ STATION ON STEEL POLE .
Erection of Materials Including Carrying.
2
75
-
3
M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. includingfastened
with galvanised Clamps and Nuts & Bolts etc. asrequired,
including carrying of the materials from Gomati RE-DDUGJY Store
yard to work site by mechanical transport/handcart/manual carrying
including loading, unloading and stacking asrequired, as per
direction of Engg-In-Charge.
12 Nos.
4
M.S. Channel of size 75x40x40x6mm for 2.8 mtr long
cross-armincluding duly galvanised as per relevant I.S. including
fastenedwith galvanised Clamps and Nuts & Bolts etc. as
required,including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Engg-In-Charge.
20 Nos.
5
M.S. angle of size 65x65x6mm for 2.8 mtr long cross-armincluding
duly galvanised as per relevant I.S. including fastenedwith
galvanised Clamps and Nuts & Bolts etc. as required,including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Engg-In-Charge.
4 Nos.
6
M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm
including duly galvanised as per relevant I.S. for DT Baseincluding
fastened with galvanised Clamps and Nuts & Bolts etc.as
required, including carrying of the materials from Gomati RE-DDUGJY
Store yard to work site by mechanical transport/handcart/manual
carrying including loading, unloading and stacking asrequired, as
per direction of Engg-In-Charge.
8 Nos.
7
Galvanised Stay set complete with rod, plate , straining
screw,thimble, guy insulator as per IS specification including
fastenedwith hot dip (heavy duty) galvanized stranded wire of size
7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required
andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2
riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c
supplyof cement, sand and brick aggregate complete with
excavation,refilling of earth, ramming alongwith centering and
shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL
specification),including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Engg-In-Charge.
16 Set
Polymeric Insulators with hardware fittings, hardware etc
asrequired as per technical specification, approved drawings
andscope of work, including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Engg-In-Charge.
a) 11KV Polymeric Disc insulator with Hardware fitting 12
Set
b) 11KV Plymerci Pin insulator 12 Set
9
ACSR Conductors (6/1/2.59mm) Weasel with Jointing
sleeves,binding materials etc as required as per technical
specification,approved drawings and scope of work, including
carrying of thematerials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Engg-In-Charge.
0.2 KM
8
76
-
10
40 mm dia., 2500 mm long GI pipe earth electrode with test
link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt
andother accessories complete as per technical specification,
approveddrawings and scope of work, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
16 Set
11
Erection of anti climbing devices viz barbed wires on
polestructures in helical form(1.5kg per pole), including carrying
ofthe materials from Gomati RE-DDUGJY Store yard to work site
bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Eng-In-Charge.
8 Nos.
12
Danger Plate(57/1988), on single/double pole structure at a
heightof 4mtr from the GL.including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
8 Nos.
13
11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type,
GangOperated, AB Switch along with Support Insulators, BaseChannel
down Pipe, Arcing Horns etc. complete as as pertechnical
specifications, scope of works and approved drawings,including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Engg-In-Charge.
4 Set
14
11KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Engg-In-Charge.
4 Set
15
Distribution Class 11KV Polymeric Lightening Arrester for DT
asper technical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Engg-In-Charge.
12 Nos.
16
C' Type cross-arm for 3 wire LT Circuit (65x65x6mm
M.S.Angle),including fastened with galvanised Clamps and Nuts
&Bolts etc. as required, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
8 Nos.
17
Straining screw holding of DT, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
8 Nos.
18
L.T. Shackle Insulator, with GI "U" Clamps and required
assortednuts and bolts, washers etc, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
24 Nos.
77
-
PVC insulated, PVC sheathed, Aluminium Conductor,
Stranded,unarmoured cable for connection of transformer LV bushing
toDistribution Box as per Scope of work, technical specification
andapproved drawings, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
1C X 35 sqm aluminium conductor cable for Single Phase 16KVA
Distribution Transformer
120 Mtr
20
LT cut(32Amps) out mechanism of single circuit
rewireableporcelain Kit-kat fuse unit of 500V grade as per relevant
ISspecification to be fastened on wooden plank including Supply
&erection of wooden plank (preferably karai wood) of size 12"
X10" X 1.5" for fixing of cut outs with Nuts & bolts as
required tobe erected on the steel tubular/ PCC pole as per
direction ofEngineer-in-charge and including carrying of the
materials fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
4 Set
21
Bimetallic Lugs (35 sqmm.) for L.T. Bushing, including
carryingof the materials from Gomati RE-DDUGJY Store yard to work
siteby mechanical transport/hand cart/manual carrying
includingloading, unloading and stacking as required, as per
direction ofEngg-In-Charge.
16 Nos.
22
P.G. Clamp, including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Engg-In-Charge.
12 Nos.
23 Pole/DT numbering with Black Colour on yelow shade as
requireddigit as per direction of Engg-In-Charge.
8 Nos.
24Supply of Nuts & Bolts including washer as reqired
Properlygalvanised as per I.S for installation of 16 KVA
DistributionTransformers
60 Kg
25 Supply of Bimetalic Lugs- 35 Sq.mm 16 Nos.
26Supply of 32 Amps. Cut out of 500V grade as per relevant
ISspecification
4 Nos.
SL No.
Description of materials Quantity Unit Rate (in Rs.) Amount (in
Rs.)
1
9 M long Steel Tubular poles of Designation 410 SP 32 (IS
2713,Pt I, II, III 1980) with base plate direct in earth
includingexcavation, refilling and ramming etc. as required (1/6th
length ofthe pole to be embedded in earth) and grouting with CC of
ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20
mm.nominal size) i/c supply of cement, sand and brick
aggregatecomplete with excavation, refilling of earth, ramming
alongwithcentering and shuttering as required (@ 0.273 Cum per
SteelTubular Pole as per TSECL specification ) etc. and applying
paintswith ready mixed primer (two or more coats) and alluminium
paintof approved quality to give an even shade etc. as required as
perdirection of Eng-In-Charge, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
2 Nos.
19
TOTAL
E(3). ERECTION CHARGE FOR INSTALLATION OF 25 KVA 3-PHASE
DISTRIBUTION SUB_ STATION ON STEEL POLE .
Erection of Materials Including Carrying.
78
-
Distribution Transformer with all accessories as per
technicalspecification, approved drawings and scope of work,
includingcarrying of the materials from Gomati RE-DDUGJY Store yard
towork site by mechanical transport/hand cart/manual
carryingincluding loading, unloading and stacking as required, as
perdirection of Engg-In-Charge.
a) Distribution Transformer, 3- Phase 25 KVA, 11/0.250 KV 1
Nos.
3
M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. includingfastened
with galvanised Clamps and Nuts & Bolts etc. asrequired,
including carrying of the materials from Gomati RE-DDUGJY Store
yard to work site by mechanical transport/handcart/manual carrying
including loading, unloading and stacking asrequired, as per
direction of Engg-In-Charge.
3 Nos.
4
M.S. Channel of size 75x40x40x6mm for 2.8 mtr long
cross-armincluding duly galvanised as per relevant I.S. including
fastenedwith galvanised Clamps and Nuts & Bolts etc. as
required,including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Engg-In-Charge.
5 Nos.
5
M.S. angle of size 65x65x6mm for 2.8 mtr long cross-armincluding
duly galvanised as per relevant I.S. including fastenedwith
galvanised Clamps and Nuts & Bolts etc. as required,including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Engg-In-Charge.
1 Nos.
6
M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm
including duly galvanised as per relevant I.S. for DT Baseincluding
fastened with galvanised Clamps and Nuts & Bolts etc.as
required, including carrying of the materials from Gomati RE-DDUGJY
Store yard to work site by mechanical transport/handcart/manual
carrying including loading, unloading and stacking asrequired, as
per direction of Engg-In-Charge.
2 Nos.
7
Galvanised Stay set complete with rod, plate , straining
screw,thimble, guy insulator as per IS specification including
fastenedwith hot dip (heavy duty) galvanized stranded wire of size
7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required
andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2
riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c
supplyof cement, sand and brick aggregate complete with
excavation,refilling of earth, ramming alongwith centering and
shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL
specification),including carrying of the materials from Gomati
RE-DDUGJYStore yard to work site by mechanical transport/hand
cart/manualcarrying including loading, unloading and stacking as
required, asper direction of Engg-In-Charge.
4 Set
Polymeric Insulators with hardware fittings, hardware etc
asrequired as per technical specification, approved drawings
andscope of work, including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Engg-In-Charge.
a) 11KV Polymeric Disc insulator with Hardware fitting 3 Set
b) 11KV Polymeric Pin insulator 3 Set
2
8
79
-
9
ACSR Conductors (6/1/2.59mm) Weasel with Jointing
sleeves,binding materials etc as required as per technical
specification,approved drawings and scope of work, including
carrying of thematerials from Gomati RE-DDUGJY Store yard to work
site bymechanical transport/hand cart/manual carrying including
loading,unloading and stacking as required, as per direction of
Engg-In-Charge.
0.05 KM
10
40 mm dia., 2500 mm long GI pipe earth electrode with test
link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt
andother accessories complete as per technical specification,
approveddrawings and scope of work, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
4 Set
11
Erection of anti climbing devices viz barbed wires on
polestructures including supply of barbed wires in helical
form(1.5kgper pole), including carrying of the materials from
Gomati RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Eng-In-Charge.
2 Nos.
12
Danger Plate(57/1988), on single/double pole structure at a
heightof 4mtr from the GL.including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
2 Nos.
13
11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type,
GangOperated, AB Switch along with Support Insulators, BaseChannel
down Pipe, Arcing Horns etc. complete as as pertechnical
specifications, scope of works and approved drawings,including
carrying of the materials from Gomati RE-DDUGJYStore yard to work
site by mechanical transport/hand cart/manualcarrying including
loading, unloading and stacking as required, asper direction of
Engg-In-Charge.
1 Set
14
11KV, 3 pole, HG fuse (D.O. Fuse Unit) set for 3-ph DTs as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Engg-In-Charge.
1 Set
15
Distribution Class 11KV Lightening Arrester for DT as
pertechnical specification, approved drawings and scope of
work,including carrying of the materials from Gomati RE-DDUGJYStore
yard to work site by mechanical transport/hand cart/manualcarrying
including loading, unloading and stacking as required, asper
direction of Engg-In-Charge.
3 Nos.
16
C' Type cross-arm for 5 wire LT Circuit (65x65x6mm M.S.Angle),
including carrying of the materials from Gomati RE-DDUGJY Store
yard to work site by mechanical transport/handcart/manual carrying
including loading, unloading and stacking asrequired, as per
direction of Engg-In-Charge.
2 Nos.
17
Straining screw holding of DT, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
2 Nos.
80
-
18
L.T. Shackle Insulator,with GI "U" Clamps and required
assortednuts and bolts, washers etc, including carrying of the
materialsfrom Gomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
8 Nos.
PVC insulated, PVC sheathed, Aluminium Conductor,
Stranded,unarmoured cable for connection of transformer LV bushing
toDistribution Box as per Scope of work, technical specification
andapproved drawings, including carrying of the materials
fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
1C X 70 sqm aluminium conductor cable for 3- Phase 25
KVADistribution Transformer
60 Mtr
20
LT cut(63Amps) out mechanism of single circuit
rewireableporcelain Kit-kat fuse unit of 500V grade as per relevant
ISspecification to be fastened on wooden plank including Supply
&erection of wooden plank (preferably karai wood) of size 24"
X12" X 1.5" for fixing of cut outs with Nuts & bolts as
required tobe erected on the steel tubular/ PCC pole as per
direction ofEngineer-in-charge and including carrying of the
materials fromGomati RE-DDUGJY Store yard to work site by
mechanicaltransport/hand cart/manual carrying including loading,
unloadingand stacking as required, as per direction of
Engg-In-Charge.
6 Nos.
21
Bimetallic Lugs (70 sqmm.) for L.T. Bushing, including
carryingof the materials from Gomati RE-DDUGJY Store yard to work
siteby mechanical transport/hand cart/manual carrying
includingloading, unloading and stacking as required, as per
direction ofEngg-In-Charge.
23 Nos.
22
P.G. Clamp, including carrying of the materials from Gomati
RE-DDUGJY Store yard to work site by mechanical
transport/handcart/manual carrying including loading, unloading and
stacking asrequired, as per direction of Engg-In-Charge.
3 Nos.
23 Pole/DT numbering with Black Colour on yelow shade as
requireddigit as per direction of Engg-In-Charge.
2 Nos.
24 Supply of Bimetalic Lugs- 70 Sq.mm 23 Nos.
25 Supply of 63 Amps. Cut out of 500V grade as per relevant
ISspecification
6 Nos.
26Supply of Nuts & Bolts including washer as reqired
Properlygalvanised as per I.S for installation of 25 KVA
DistributionTransformers
15 Kg
SL No.
ITEM DESCRIPTION Unit QNTYValue Price
(Rs)Total (Rs)
1 Supply of WOODEN METER BOARD (14X12) inchs Nos 385
2Supply of WOODEN BOARD FOR SWITCH & LAMP HOLDER(6X4)
Inchs
Nos 385
3 Supply of 16 AMP ICDP MAIN SWITCH AS PER ISI Nos 385
4 Supply of 5A PIANO SWITCH ISI Nos 385
5 Supply of BATTEN HOLDER ISI Nos 385
6Supply of EARTHING BOLT OF SIZE M 10 x 50mm WITHNUTS &
BOLTS
Nos 385
7 Supply of PVC PIPE 20 mm DIA ISI Mtrs. 1155
8 Supply of PVC SADDLE Nos 1540
19
TOTAL
(F) Estimate for BPL Connection
81
-
9 Supply of SINGLE CORE 1.5 sq.mm. COPPER CABLE Mtr. 1925
10 Supply of REEL INSULATOR Nos 15400
11 Supply of EARTH SPIKE (1.80 Mtr X20 mm) Nos 385
12 Supply of 7 WATT PIN TYPE LED LAMP (710 LUMENS) Nos 385
13 Supply of Screw of different sizes LS 385
14
Erection of SINGLE PHASE (5-30A) STATIC ENERGY METEROF CLASS 1.0
ACCURACY ELECTRONIC ENERGY METERALONG WITH METER BOX AS PER TS OF
TSECL (TSECLSupply)
Nos 385
15Erection of PVC CABLE OF SIZE 2.5 SQMM SINGLE COREALUMINIUM
CONDUCTOR (TSECL Supply)
Mtr 23100
16 Erection of 8 SWG GI WIRE FOR EARTHING (TSECL Supply) KG
770
17 10 SWG GI WIRE (TSECL Supply) KG 770
18 Erection Price No. 385 TOTAL
82
Sheet1
Sheet2
LT AB CABLES (2)
A. LABOUR SCHEDULE FOR DRAWAL OF LT AB CABLE (3X50+1X35SQMM) FOR
9.61 K.M
Erection of Materials
SL NO.DESCRIPTION OF ITEMUNITQTY.RATE(in Rs)AMOUNT
1Survey of L & MV lineKM9.61154614,857.06
28 Mtr. Long 200 Kgs. P.C.C. Pole with R.C.C. Base Plate /Pad in
earth including excavation,refilling and ramming etc. as required (
1/6th length of the pole to be embeded in
earth)NO.125800100,000.00
38 Mtr. Long S.T. Pole of Designation 410SP-15(IS
2713,PtI,II,III,1980) with base plate direct in earth including
excavation ,refilling and ramming etc, as required (1/6th length of
the pole to be embeded in earth ) and grouting with CC of ratio
1:2:4 (1 Cement, 2 River Sand and 4 jhamabrick aggregate of 20 mm
nominal size) including supply of cement,aggregate complete with
excavation, refilling of earth, ramming alongwith centering and
shuttering as required @ 0.273 Cum per S.T. Pole as per TSECL
specification )etc. and applying paints with ready mixed primer (2
or more Coats ) and almunium paints of approved quality to give an
even shade etc, as required as per direction Engineer in-
ChargeNO1151900218,500.00
4Stringing & sagging of 1.1 K.V. L.T. AB Cable on P.C.C.
pole average span of 25 m to 40 m with fixing of Nylon Cable tie to
be tied every 2 mtr interval of AB Cable with fixing of End caps at
all open ends of AB Cable 3x50+1x35 sqmm( insulated messanger) AB
CableKM9.6126000249,860.00
5Erection of anchor Clamp suitable for AB Cable of 35/50 sq.mm.
insulated Massenger , including errection of G.I. Pole clamp, G.I.
Flat type Eye HookNO.14414020,160.00
6Erection of Suspension clamp suitable for.insulated Massenger,
including errection of G.I. Pole clamp, G.I. Flat type Eye
HookNO.24014033,600.00
7Erection of insulating Piercing connectors for connection of
Distribution Boxes including connection with AB
CableNO.11532933,437.00
8Erection of Insulating Piercing Connectors for ABC tee
Connection including Connection with AB CableNO.240296,960.00
9Erection of distribution box on pole by 2 Nos Steel strap &
buckles / G.I. ClampNO.240456109,440.00
10Erection of preinstalled Water proof crymping type sleeves for
Straight through jointsNO.29962,784.00
11Erection of Bimetalic Crymping Type Waterproof lug for
16/50/70/35mm L.T. Power cables (1 set=4 Nos.)NO.20531,060.00
12Erection of L.T.Stay set completewith rod, plate, straining
screw thimble guy insulator as per IS specification including
fastened with hot dip (heavy duty galvanised stranded wire of size
7/2.50mm alongwith stay clamps ,Nuts & bolts etc. as required
and grounding stay set with CC of ratio 1:2:4 (1 Cement,2 Riversand
4 jhamabrick aggregate of 20mm nominal size )i/c supply of cement
,sand and brick aggregate complete with excavation , refilling of
earth ramming alongwith centering and shuttering as required (@
0.119Cu.m per stay set as per TSECL
specificationNO.77590.7745,489.29
13Numbering of P.C.C. PoleNO.240358,400.00
Total844,547.35
ABSTRACT OF COST
SINGLE PHASE LV LINE ON PCC & STEEL POLE WITH AB CABLE FOR
9.61 KM
SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.
1ERECTION CHARGES844,547.35
2SERVICE TAX @14.5%122459.36575
Total Rs967,006.72
Say Rs967,007.00
B.ERECTION CHARGE FOR CONSTRUCTION OF 1 PHASE - 2 WIRE L.T .
LINE ON 8 Mtr. PCC/S.T. POLE WITH ACSR (6/1/2.59 MM) AT DISTRICT
UNOKOTI (CHANDIPUR BLOCK) RL-24.74 KM
Erection of Materials
SL NO.Description of itemQuantityUnitUnit Rate in Rs.Amount in
Rs.
18 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad in earth
including excavation, refilling and ramming etc. as required (1/6th
length of the pole to be embedded in earth)322NO.1335.6430063.2
28 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713,
Pt I, II, III 1980) with base plate direct in earth including
excavation, refilling and ramming etc. as required (1/6th length of
the pole to be embedded in earth) and grouting with CC of ratio
1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.
nominal size) i/c supply of cement, sand and brick aggregate
complete with excavation, refilling of earth, ramming alongwith
centering and shuttering as required (@ 0.273 Cum per Steel Tubular
Pole as per TSECL specification ) etc. and applying paints with
ready mixed primer (two or more coats) and alluminium paint of
approved quality to give an even shade etc. as required as per
direction of Eng-In-Charge.297No.999.93296979.21
3Galvanised Stay set complete with rod, plate , straining screw,
thimble, guy insulator as per IS specification including fastened
with hot dip (heavy duty) galvanized stranded wire of size 7/2.50
mm. alongwith stay clamps, Nuts & Bolts etc. as required and
Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river
sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of
cement, sand and brick aggregate complete with excavation,
refilling of earth, ramming alongwith centering and shuttering as
required ( @ 0.119 Cum per stay set as per TSECL
specification).297Set590.77175458.69
4ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,
binding materials etc as required as per technical specification,
approved drawings and scope of work24.74KM2837.9770211.3778
58 SWG GI Wire for continuous earthing of L.T. Line, as per
technical specification, approved drawings and scope of work
including craddle gaurding32162KG7.42238642.04
6Barbed wire for anti-climbing device619KG29.1518043.85
7L.T Shackle insulator (4/1972)1238No.24.5630405.28
840 mm dia., 3000 mm long GI pipe earth electrode with test
link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and
other accessories complete as per technical specifications for LT
Overhead line's every 6th pole earthing and line structure earthing
as per approved drawings, specification and scope of
work.124Set1226.07152032.68
9Spike earthing 20mm dia as per technical specification,
approved drawings and scope of work.0No.00
10"U" Clamp (made of 50 x 6 mm M.S. Flat) duly galvanised as per
relevant I.S.619No.31.819684.2
11C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) including
fastened with galvanised Clamps and Nuts & Bolts etc. as
required.619No.92.5757300.83
12L.T Danger Plate(57/1988)619No.21.9113562.29
13Reel Insulator1238No.8.1310064.94
14Pole numbering with Black Colour on yelow shade as required
digit as per direction of Engg-In-Charge.619No.3521665
Total1534113.5878
ABSTRACT OF COST
SINGLE PHASE LV LINE ON PCC & STEEL POLE WITH ACSR
(6/1/2.59mm) FOR 24.74 KM
SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.
1ERECTION CHARGES1534113.5878
2SERVICE TAX @14.5%222446.470231
Total Rs1756560.058031
Say Rs1,756,560
C. ERECTION CHARGE FOR CONSTRUCTION OF 3-PHASE -4-WIRE LT LINE
5.42 KM ON 8 Mtr. PCC/ S.T. POLE WITH ACSR CONDUCTOR (6/1/2.59MM)
AT CHANDI BLOCK DISTRICT UNOKOTI
Erection of Materials
SL NO.Description of itemQuantityUnitUnit Rate in Rs.Amount in
Rs.
18 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad in earth
including excavation, refilling and ramming etc. as required (1/6th
length of the pole to be embedded in earth)71NO.80056800
28 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713,
Pt I, II, III 1980) with base plate direct in earth including
excavation, refilling and ramming etc. as required (1/6th length of
the pole to be embedded in earth) and grouting with CC of ratio
1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.
nominal size) i/c supply of cement, sand and brick aggregate
complete with excavation, refilling of earth, ramming alongwith
centering and shuttering as required (@ 0.273 Cum per Steel Tubular
Pole as per TSECL specification ) etc. and applying paints with
ready mixed primer (two or more coats) and alluminium paint of
approved quality to give an even shade etc. as required as per
direction of Eng-In-Charge.65No.1900123500
3Galvanised Stay set complete with rod, plate , straining screw,
thimble, guy insulator as per IS specification including fastened
with hot dip (heavy duty) galvanized stranded wire of size 7/2.50
mm. alongwith stay clamps, Nuts & Bolts etc. as required and
Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river
sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of
cement, sand and brick aggregate complete with excavation,
refilling of earth, ramming alongwith centering and shuttering as
required ( @ 0.119 Cum per stay set as per TSECL
specification).65Set590.7738400.05
4ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,
binding materials etc as required as per technical specification,
approved drawings and scope of work5.42KM2837.9715381.7974
58 SWG GI Wire for continuous earthing of L.T. Line, as per
technical specification, approved drawings and scope of work
including craddle gaurding705KG7.425231.1
6Barbed wire for anti-climbing device136KG29.153964.4
7L.T Shackle insulator (4/1972)544No.24.5613360.64
840 mm dia., 3000 mm long GI pipe earth electrode with test
link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and
other accessories complete as per technical specifications for LT
Overhead line's every 6th pole earthing and line structure earthing
as per approved drawings, specification and scope of
work.27Set250067500
9Spike earthing 20mm dia as per technical specification,
approved drawings and scope of work.0No.00
10"U" Clamp (made of 50 x 6 mm M.S. Flat) duly galvanised as per
relevant I.S.136No.31.84324.8
11C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) including
fastened with galvanised Clamps and Nuts & Bolts etc. as
required.136No.92.5712589.52
12L.T Danger Plate(57/1988)136No.21.912979.76
13Reel Insulator272No.8.132211.36
14Pole numbering with Black Colour on yelow shade as required
digit as per direction of Engg-In-Charge.136No.354760
Total351003.4274
ABSTRACT OF COST
THREE PHASE LV LINE ON PCC & STEEL POLE WITH ACSR (6/1/2.59
mm) FOR 5.42 KM
SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.
1ERECTION CHARGES351003.4274
2SERVICE TAX @14.5%50895.496973
Total Rs401898.924373
Say Rs401899
D. ERECTION CHARGE FOR 3 PHASE 11KV LINE ON P.C.C. & STEEL
POLE RL-15.58KM WITH ACSR WEASEL AND RABBIT CONDUCTOR AT UNAKOTI
DISTRICT (CHANDIPUR BLOCK)
Erection Charge
RATE FOR 15.58 KM HT LINE
SL No.Description of materialsQuantityUnitRate (in Rs.)Amount
(in Rs.)
19 Mtr./200 Kgs PCC pole with RCC Base
plate/pad268No.37099160
29 M long Steel Tubular poles with welded steel base plate of
Designation 540 SP 52 (IS 2713, Pt I, II, III
1980)110No.1217133870
3Cross arms made of 100 x 50 x 50 x 6 mm M.S. Channel duly
galvanised as per relevant I.S.0
(a) Single pole top bracket 0.3 mtr. Long217No.255425
b) Double pole cross-arm 2.20 mtr. Long80No.504000
4V-cross-arm made of 75x40x40x6 mm Ms channel duly galvanised as
per relevant I.S.217No.5010850
5Single Pole protective guard bracket 1.6mtr. Long by 65x65x6 mm
M.S.Angle duly galvanised as per relevant I.S.205No.326560
6Double pole guard bracket, 2.5 mtr. Long by 65x65x6mm M.S.
Angle duly galvanised as per relevant I.S.94No.504700
7Double Pole Cross bracing made of 65 x 65 x 6 mm M.S. Angle
duly galvanised as per relevant I.S.0
a) 1.8 mtr long for horizontal bracing161No.508050
(b) 3.2 mtr long for cross bracing161No.0
8Cross-arm clamp made of 50x6mm, M.S. Flat duly galvanised as
per relevant I.S.3No.0
9Stay clamp made of 50x6mm, M.S.Flat duly galvanised as per
relevant I.S.204No.0
10Galvanised Stay set complete with rod, plate & straining
screw.204Set307.4662721.84
11G.I. Stranded wire (7/3.15 mm) for Stay Set1021KG0
1211 KV 45 KN Disc Insulator with hardware
fittings520Set4020800
1311KV Pin insulator with G.I. pin.850Set2521250
14H.T. Stay Guy Insulator.0No.00
15a) ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,
binding materials etc as required as per technical specification,
approved drawings and scope of work. b) ACSR Conductors
(6/1/3.35mm) Rabbitl with Jointing sleeves, binding materials etc
as required as per technical specification, approved drawings and
scope of work.16KM225036000
168 SWG GI Wire for continuous earthing of 11 KV Line, as per
technical specification, approved drawings and scope of
work.0KM4900
1740 mm dia., 3000 mm long GI pipe earth electrode with test
link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and
other accessories complete as per technical specification, approved
drawings and scope of work.79Set2650209350
18Spike earthing 20mm dia as per technical specification,
approved drawings and scope of work.220No.10022000
19Barbed wire for anticlimbing device.402KG156030
2011 kv Danger plate.299No.82392
21Nuts & Bolts ( Assorted size)6300
22P.G.Clamps.a)FOR 30 SQ.MM. CONDUCTOR b)FOR 50 SQ,MM.
CONDUCTOR236No.37.58850
23Craddle Gaurding299No.15847242
24Fixing of Cross lacing2392No.1331096
TOTAL740346.84
ABSTRACT OF COST
3 PHASE 11KV LINE ON PCC & STEEL POLE (PCC Pole : Steel Pole
:: 70:30) WITH ACSR (6/1/2.59 MM) CONDUCTOR AT CHANDIPUR BLOCK OF
UNOKOTI DISTRICT
SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.
1ERECTION CHARGES740346.84
2SERVICE TAX @14.5%107350.2918
Total Rs847697.1318
Say Rs847698
E. ERECTION CHARGE FOR INSTALLATION OF 10 KVA 1-PHASE
DISTRIBUTION SUB_ STATION ON STEEL POLE AT UNAKOTI (CHANDIPUR
BLOCK)
Erection of Materials
FOR 19 DTR S/S
SL No.Description of materialsQuantityUnitRate (in Rs.)Amount
(in Rs.)
19 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713,
Pt I, II, III 1980) with base plate direct in earth including
excavation, refilling and ramming etc. as required (1/6th length of
the pole to be embedded in earth) and grouting with CC of ratio
1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.
nominal size) i/c supply of cement, sand and brick aggregate
complete with excavation, refilling of earth, ramming alongwith
centering and shuttering as required (@ 0.273 Cum per Steel Tubular
Pole as per TSECL specification ) etc. and applying paints with
ready mixed primer (two or more coats) and alluminium paint of
approved quality to give an even shade etc. as required as per
direction of Eng-In-Charge.38No.121746246
2Distribution Transformer with all accessories as per as per
technical specification, approved drawings and scope of work.0
a) Distribution Transformer, 1- Phase 10 KVA, 11/0.250
KV19No.5009500
3M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.57No.603420
4M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.95No.504750
5M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.95No.504750
6M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm
including duly galvanised as per relevant I.S. for DT Base
including fastened with galvanised Clamps and Nuts & Bolts etc.
as required.38No.351330
7Galvanised Stay set complete with rod, plate , straining screw,
thimble, guy insulator as per IS specification including fastened
with hot dip (heavy duty) galvanized stranded wire of size 7/2.50
mm. alongwith stay clamps, Nuts & Bolts etc. as required and
Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river
sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of
cement, sand and brick aggregate complete with excavation,
refilling of earth, ramming alongwith centering and shuttering as
required ( @ 0.119 Cum per stay set as per TSECL
specification).76Set307.4623366.96
8Insulators with hardware fittings, hardware etc as required as
per technical specification, approved drawings and scope of
work.0
a) 11KV Disc insulator with Hardware fitting114Set252850
b) 11KV Pin insulator with Hardware fitting114Set404560
9ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,
binding materials etc as required as per technical specification,
approved drawings and scope of work.6.36KM0
108 SWG GI Wire for continuous earthing of 11 KV Line, as per
technical specification, approved drawings and scope of work
including craddle gaurding1590KG0
1140 mm dia., 3000 mm long GI pipe earth electrode with test
link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and
other accessories complete as per technical specification, approved
drawings and scope of work.76Set2500190000
12Barbed wire for anti climbing device38KG34.451309.1
13Danger plate for 11 KV S/S38No.8304
1411 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang
Operated, AB Switch along with Support Insulators, Base Channel
down Pipe, Arcing Horns etc. complete as as per technical
specifications, scope of works and approved
drawings19Set4558645
1511KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as per
technical specification, approved drawings and scope of
work.19Set1903610
16Distribution Class 11KV Lightening Arrester for DT as per
technical specification, approved drawings and scope of
work57No.653705
17C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S.
Angle)38No.25950
18Straining screw holding of DT38No.32.861248.68
19L.T. Shackle Insulator114No.121368
20"U" clamp (made of 50x6mm M.S. flat) duly galvanised as per
relevant I.S.114No.121368
21PVC insulated, PVC sheathed, Aluminium Conductor, Stranded,
unarmoured cable for connection of transformer LV bushing to
Distribution Box as per Scope of work, technical specification and
approved drawings:0
1C X 35 sqm aluminium conductor cable for Single Phase 10 KVA
Distribution Transformer570Mtr16.789564.6
22LT cut out mechanism as per scope of the work, technical
specifications and approved drawings suitable for single Phase
Distribution Transformer: (Including supply of wooden
plank)57Set55031350
23Single Phase D T Metering19No.2003800
24Bimetallic Lugs (35 sqmm.) for L.T.
Bushing76No.16.071221.32
25P.G. Clamp57No.29.331671.81
26Pole numbering with Black Colour on yelow shade as required
digit as per direction of Engg-In-Charge.38No.501900
TOTAL362788.47
ABSTRACT OF COST
INSTALLATION OF 19 NOS 10 KVA 1-PHASE DISTRIBUTION SUB_ STATION
ON STEEL POLE
SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.
1ERECTION CHARGES362788.47
2SERVICE TAX @14.5%52604.32815
Total Rs415392.79815
Say Rs415393
Supply of 1-phase 2-wire CT operated fully static AMR compatable
Tri-vactor energy Meter of accuracy class 0.58 suitable for
operation at LT level for 10 KVA DT as per Draft Indian Companion
Standard equivalent to IEC-62056 protocol and DLMS compliant (with
upto date Amendment ) i/c Meter Housing Box for DT Metering made of
Thermo-plastic known FRPP or MRPP and as per the direction of
engineer -in-charge.
F. ERECTION CHARGE FOR INSTALLATION OF 16KVA 1-PHASE
DISTRIBUTION SUB_ STATION ON STEEL POLE AT DISTRICT UNAKOTI
(CHANDIPUR)
Erection of Materials
FOR 6NOS OF DTR S/S
SL No.Description of materialsQuantityUnitRate (in Rs.)Amount
(in Rs.)
19 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713,
Pt I, II, III 1980) with base plate direct in earth including
excavation, refilling and ramming etc. as required (1/6th length of
the pole to be embedded in earth) and grouting with CC of ratio
1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.
nominal size) i/c supply of cement, sand and brick aggregate
complete with excavation, refilling of earth, ramming alongwith
centering and shuttering as required (@ 0.273 Cum per Steel Tubular
Pole as per TSECL specification ) etc. and applying paints with
ready mixed primer (two or more coats) and alluminium paint of
approved quality to give an even shade etc. as required as per
direction of Eng-In-Charge.12No.121714604
2Distribution Transformer with all accessories as per as per
technical specification, approved drawings and scope of work.0
a) Distribution Transformer, 1- Phase 16 KVA, 11/0.250
KV6No.5003000
3M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.18No.601080
4M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.30No.501500
5M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.6No.50300
6M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm
including duly galvanised as per relevant I.S. for DT Base
including fastened with galvanised Clamps and Nuts & Bolts etc.
as required.12No.35420
7Galvanised Stay set complete with rod, plate , straining screw,
thimble, guy insulator as per IS specification including fastened
with hot dip (heavy duty) galvanized stranded wire of size 7/2.50
mm. alongwith stay clamps, Nuts & Bolts etc. as required and
Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river
sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of
cement, sand and brick aggregate complete with excavation,
refilling of earth, ramming alongwith centering and shuttering as
required ( @ 0.119 Cum per stay set as per TSECL
specification).24Set307.467379.04
8Insulators with hardware fittings, hardware etc as required as
per technical specification, approved drawings and scope of
work.0
a) 11KV Disc insulator with Hardware fitting36Set25900
b) 11KV Pin insulator with Hardware fitting36Set401440
9ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,
binding materials etc as required as per technical specification,
approved drawings and scope of work.7.44KM0
108 SWG GI Wire for continuous earthing of 11 KV Line, as per
technical specification, approved drawings and scope of work
including craddle gaurding1860KG0
1140 mm dia., 3000 mm long GI pipe earth electrode with test
link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and
other accessories complete as per technical specification, approved
drawings and scope of work.24Set250060000
12Barbed wire for anti climbing device12KG34.45413.4
13Danger plate for 11 KV S/S12No.896
1411 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang
Operated, AB Switch along with Support Insulators, Base Channel
down Pipe, Arcing Horns etc. complete as as per technical
specifications, scope of works and approved drawings6Set4552730
1511KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as per
technical specification, approved drawings and scope of
work.6Set1901140
16Distribution Class 11KV Lightening Arrester for DT as per
technical specification, approved drawings and scope of
work18No.651170
17C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S.
Angle)12No.25300
18Straining screw holding of DT12No.32.86394.32
19L.T. Shackle Insulator36No.12432
20"U" clamp (made of 50x6mm M.S. flat) duly galvanised as per
relevant I.S.36No.12432
21PVC insulated, PVC sheathed, Aluminium Conductor, Stranded,
unarmoured cable for connection of transformer LV bushing to
Distribution Box as per Scope of work, technical specification and
approved drawings:0
1C X 35 sqm aluminium conductor cable for Single Phase 16 KVA
Distribution Transformer180Mtr16.783020.4
22LT cut out mechanism as per scope of the work, technical
specifications and approved drawings suitable for single Phase
Distribution Transformer.18Set5509900
23Single Phase D T Metering6No.2001200
24Bimetallic Lugs (35 sqmm.) for L.T.
Bushing24No.16.07385.68
25P.G. Clamp18No.29.33527.94
26Pole numbering with Black Colour on yelow shade as required
digit as per direction of Engg-In-Charge.12No.50600
TOTAL113364.78
ABSTRACT OF COST
INSTALLATION OF 06 NOS 16 KVA 1-PHASE DISTRIBUTION SUB_ STATION
ON STEEL POLE
SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.
1ERECTION CHARGES113364.78
2SERVICE TAX @14.5%16437.8931
Total Rs129802.6731
Say Rs129803
Supply of 1-phase 2-wire CT operated fully static AMR compatable
Tri-vactor energy Meter of accuracy class 0.58 suitable for
operation at LT level for 10 KVA DT as per Draft Indian Companion
Standard equivalent to IEC-62056 protocol and DLMS compliant (with
upto date Amendment ) i/c Meter Housing Box for DT Metering made of
Thermo-plastic known FRPP or MRPP and as per the direction of
engineer -in-charge.
G. ERECTION CHARGE FOR INSTALLATION OF 25 KVA 3-PHASE
DISTRIBUTION SUB_ STATION ON STEEL POLE AT DISTRICT UNAKOTI
(CHANDIPUR)
Erection of Materials
FOR 3 NOS OF DTR S/S
SL No.Description of materialsQuantityUnitRate (in Rs.)Amount
(in Rs.)
19 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713,
Pt I, II, III 1980) with base plate direct in earth including
excavation, refilling and ramming etc. as required (1/6th length of
the pole to be embedded in earth) and grouting with CC of ratio
1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.
nominal size) i/c supply of cement, sand and brick aggregate
complete with excavation, refilling of earth, ramming alongwith
centering and shuttering as required (@ 0.273 Cum per Steel Tubular
Pole as per TSECL specification ) etc. and applying paints with
ready mixed primer (two or more coats) and alluminium paint of
approved quality to give an even shade etc. as required as per
direction of Eng-In-Charge.6No.12177302
2Distribution Transformer with all accessories as per technical
specification, approved drawings and scope of work.0
a) Distributiob Transformer, 3- Phase 25 KVA, 11/0.250
KV3No.5001500
3M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.9No.60540
4M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.15No.50750
5M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm
including duly galvanised as per relevant I.S. including fastened
with galvanised Clamps and Nuts & Bolts etc. as
required.3No.50150
6M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm
including duly galvanised as per relevant I.S. for DT Base
including fastened with galvanised Clamps and Nuts & Bolts etc.
as required.6No.35210
7Galvanised Stay set complete with rod, plate , straining screw,
thimble, guy insulator as per IS specification including fastened
with hot dip (heavy duty) galvanized stranded wire of size 7/2.50
mm. alongwith stay clamps, Nuts & Bolts etc. as required and
Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river
sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of
cement, sand and brick aggregate complete with excavation,
refilling of earth, ramming alongwith centering and shuttering as
required ( @ 0.119 Cum per stay set as per TSECL
specification).12Set307.463689.52
8Insulators with hardware fittings, hardware etc as required as
per technical specification, approved drawings and scope of
work.0
a) 11KV Disc insulator with Hardware fitting18Set25450
b) 11KV Pin insulator with Hardware fitting18Set40720
9ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,
binding materials etc as required as per technical specification,
approved drawings and scope of work.1KM0
108 SWG GI Wire for continuous earthing of 11 KV Line, as per
technical specification, approved drawings and scope of work
including craddle gaurding45KG7.42333.9
1140 mm dia., 3000 mm long GI pipe earth electrode with test
link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and
other accessories complete as per technical specification, approved
drawings and scope of work.12Set250030000
12Barbed wire for anti climbing device6KG34.45206.7
13Danger plate for 11 KV S/S6No.848
1411 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang
Operated, AB Switch along with Support Insulators, Base Channel
down Pipe, Arcing Horns etc. complete as as per technical
specifications, scope of works and approved drawings3Set4551365
1511KV, 3 pole, HG fuse (D.O. Fuse Unit) set for 3-ph DTs as per
technical specification, approved drawings and scope of
work.3Set190570
16Distribution Class 11KV Lightening Arrester for DT as per
technical specification, approved drawings and scope of
work9No.65585
17C' Type cross-arm for 5 wire LT Circuit (65x65x6mm M.S.
Angle)6No.25150
18Straining screw holding of DT6No.32.86197.16
19L.T. Shackle Insulator24No.12288
20"U" clamp (made of 50x6mm M.S. flat) duly galvanised as per
relevant I.S.24No.12288
21PVC insulated, PVC sheathed, Aluminium Conductor, Stranded,
unarmoured cable for connection of transformer