PRICE LIST 2006 TECALEMIT PRICE LIST 2006 PRICE LIST 2006 03/2006 Rev 04
PRIC
E LI
ST 2
006
TEC
ALE
MIT
PRIC
E LI
ST 2
006
PR
ICE
LIST
200
6
03/2006 Rev 04
RABBIT 750Motorcycle scissor lift with 750 kg capacity suitablefor all types of motorcycles with hydraulic power unit.
€ 2.950,00RABBIT 750
1
MONDIAL LIFT | Valid until 30.06.2006
Technical features:
On floor versionRack mechanical safety deviceHydraulic safety using parachute valveOverload security valveLowering control valveLow voltage controls (24V)
Technical data:
Electric-hydraulic/pneumatics functioningCapacity 750 KgMaximum height: 1200 mmPlatform length: 2242 mmPlatform width: 750 mmLifting time: 30 sec.Motor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
Standard equipment for version with hydraulic power unit:
Mecchanical viceHydraulic power unitKit of hoses/cables for control unit at 2 mt. distanceStandard colour: red RAL 3000 or blue RAL 5015
Standard equipment for version with pnuematical treadle drive:
Mecchanical viseManual locking deviceStandard colour: red RAL 3000 or blue RAL 5015
Scissor lift for motorbike with capacity 750 kg suitable for all the motorcycles. Available with electro-oleodymanic power unit or with oleo-pneumatics pump. Furnished of series with manual locking device,on demand with pneumatics vice.
RABBIT 750
Motorcycle scissor lift with 750 kg capacity suitablefor all types of motorcycles with pnuematicaltreadle drive.
newmodel
€ 2.250,00
PANDA 30PA30/2004Scissor lift, capacity 3000 kg,1 mt. max. lifting height€ 3.600,00PA30/2004 1 phScissor lift, capacity 3000 kg 1 mt. maxlifting height, single phase 50 Hz motor.€ 3.900,00
2
MONDIAL LIFT | Valid until 30.06.2006
Technical features:
On floor versionHydraulic synchronism of platforms by means of double coupling barRack mechanical safety deviceHydraulic safety using parachute valveOverload security valveLowering control valveAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 3.000 KgMaximum height: 940 mmPlatform length: 1480 mm + 520 mm short rampsPlatform width: 500 mmLifting time: 12 sec.Motor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
Standard equipment:
No. 4 rubber pads h= 20 mm.Kit of hoses/cables for control unit at 2 mt. distanceNr. 3 hose coversStandard colour: red RAL 3000 or blue RAL 5015
Accessories:
KMPA30 Panda mobile kit € 183,00KLRPA30 Kit of long ramps Panda € 445,00KT1PA30 1 mt. hose extension kit for Panda € 63,00KT2PA30 2 mt. hose extension kit for Panda € 84,00KT3PA30 3 mt. hose extension kit for Panda € 105,00CL2-0075 Panda/Puma hose cover (0,70 mt.) € 19,00KTG20 Kit of rubber pads h=20 mm (4 pcs) € 57,00KTG40 Kit of rubber pads h=40 mm (4 pcs) € 80,00KTG80 Kit of rubber pads h=80 mm (4 pcs) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0170 Panda central cover € 164,00
PANDA 30
3
MONDIAL LIFT | Valid until 30.06.2006
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedWooden pallet dim. 200x200x25 cm.: liftCarton dim. 100x50x40 cm.: control unit + standard equipmentTot. gross weight: 500 Kg, Tot. net weight: 460 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = 36 unitsBy sea: container 20'' box = 18 units
TURTLE 30
TURTLE 30 - for bodyshopsScissor lift, capacity 3000kg, inground version.
€ 5.900,00
4
MONDIAL LIFT | Valid until 30.06.2006
Technical features:
Inground versionRack mechanical safety deviceHydraulic safety using parachute valveOverload security valveAcoustic and light signal for final lowering phaseProximity switchLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 3.000 KgMaximum height: 1760 mmPlatform length: 2170 mmTurning arm lenght: 425 mmPlatform width: 660 mmLifting time: 75 sec.Lowering time: 45 secMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
Standard equipment for version with hydraulic power unit:
No. 4 rubber pads h= 80 mm.Turtle galvanized frame for inground installationKit of hoses/cables for control unit at 2 mt. distanceStandard colour: red RAL 3000 or blue RAL 5015
Scissor lift electro-oleodynamic particularly proper for the body shop but useful also in theauto-reparation generally. The height of lifting of 1,5 mt allows an easy access in all the partsof coachwork. The strong structure and the devices mechanical safety and hydraulic theyguarantee to the operator the maximum safety.
newmodel
Technical features:
Inground versionHydraulic synchronism of platformsRack mechanical safety device on pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 3.500 KgMaximum height: 1850 mmPlatform length: 1500 mm + 500 mm extension (2000mm CAR Mod.)Platform width: 540 mmLifting time: 45 sec.Motor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
Standard equipment:
No. 4 rubber pads h= 80 mm.Kit of hoses/cables for control unit at 2 mt. distanceNo. 2 space coversStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
TILE35 Leopard frame for inground installation € 590,00CP1-0039 Leopard space covers € 108,00KT1LE35 1 mt. hose/cable extension kit for Leopard € 88,00KT2LE35 2 mt. hose/cable extension kit for Leopard € 120,00KT3LE35 3 mt. hose/cable extension kit for Leopard € 151,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00
LEOPARD 35LE 35 IDouble scissor lift, capacity 3500 Kg.,inground version€ 6.600,00
LE 35 I 1 phDouble scissor lift, capacity 3500 Kg.,inground version, single phase 50 Hz motor.€ 6.900,00
5
MONDIAL LIFT | Valid until 30.06.2006
LE 35 CARDouble scissor lift, capacity 3500 Kg.,inground version, motor 3ph 50Hz.€ 6.950,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedWooden pallet dim. 155x60x160 cm.: lift + control unit + standard equipmentGross weight: 800 Kg, Net weight: 780 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = 30 unitsBy sea: container 20'' box = 25 units
LEOPARD 35
6
MONDIAL LIFT | Valid until 30.06.2006
Technical features:
Inground/on floor versionHydraulic synchronism of platformsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 3.000 KgMaximum height: 1850 mm inground version / 1920 mm on floor versionPlatform length: 1530 mm + 500 mm extensionPlatform width: 640 mmLifting time: 45 sec.Motor: 3ph 230/400 V - 3 Kw - 50 Hz
Standard equipment of inground version I:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceNo. 2 space coversStandard colours: red RAL 3000 or blue RAL 5015
Standard equipment of on floor version SR/LR:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceNo. 4 hose coversKit of short/long rampsStandard colours: red RAL 3000 or blue RAL 5015
PUMA 30PU 30 ILow profile double scissor lift, capacity 3.000 Kg.,inground version
€ 6.900,00PU 30 I 1ph € 7.200,00
PU 30 SRLow profile double scissor lift, capacity 3.000 Kg.,on floor version with short ramps
€ 7.100,00 PU 30 SR 1ph € 7.400,00
PU 30 LRLow profile double scissor lift, capacity 3.000 Kg.,on floor version with long ramps
€ 7.300,00 PU 30 LR 1ph € 7.600,00
7
MONDIAL LIFT | Valid until 30.06.2006
Accessories:
CL2-0075 Panda/Puma hose cover (0,70 mt.) € 19,00TIPU30 Puma frame for inground installation € 395,00CP1-0051 Puma space cover € 84,00KSRPU30 Kit of short ramps Puma € 340,00KLRPU30 Kit of long ramps Puma € 584,00KT1PU30 1 mt. hose extension for Puma € 97,00KT2PU30 2 mt. hose extension for Puma € 134,00KT3PU30 3 mt. hose extension for Puma € 170,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedLift + control unit + standard equipmentPU30I: wooden pallet dim. 170x65x105 cm., Gross weight: 900 Kg, Net weight: 880 KgPU30SR: wooden pallet dim. 170x65x95 cm., Gross weight: 900 Kg, Net weight: 880 KgPU30LR: wooden pallet dim. 170x65x120 cm., Gross weight: 950 Kg, Net weight: 930 Kg
Special packing for shipments by sea: on requestLift + control unit + standard equipment: wooden box
Q.ty for shipment:By land: complete truck = 26 unitsBy sea: container 20'' box = 25 units
PUMA 30
8
MONDIAL LIFT | Valid until 30.06.2006
PUMA
9
PUMA
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the baseHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity: 4.000 KgMaximum height: 1775 mm inground version / 2040 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 4200 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
MONDIAL LIFT | Valid until 30.06.2006
TI 40 S - 4200Scissor lift standard model, 4.000 Kg capacity, platforms 4200 mm. € 9,600,00TI 40 A - 4200Scissor lift for total alignment, 4.000 Kg capacity, platforms 4200 mm. € 10.900,00TI 40 LT - 4200Scissor lift standard model with lift-tables, 4.000 Kg capacity, platforms 4200 mm. € 13.160,00TI 40 GT - 4200Scissor lift for total alignment with lift-tables, 4.000 Kg capacity, platforms 4200 mm. € 14.500,00KI40Kit inground version (4 short ramps) € 216,00KP40Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 794,00
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
TIGER 40-4200 with platforms L= 4200 mm
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TITI40-4200 Frame for inground installation Tiger 40 L=4200 mm € 880,00KLU40 Lighting kit 24V for Tiger € 1.242,00KT1TI40S 1 mt. hose extension kit for Tiger 40 S € 107,00KT1TI40A 1 mt. hose extension kit for Tiger 40 A € 107,00KT1TI40LT 1 mt. hose extension kit for Tiger 40 LT € 162,00KT1TI40GT 1 mt. hose extension kit for Tiger 40 GT € 162,00KT2TI40S 2 mt. hose extension kit for Tiger 40 S € 147,00KT2TI40A 2 mt. hose extension kit for Tiger 40 A € 147,00KT2TI40LT 2 mt. hose extension kit for Tiger 40 LT € 225,00KT2TI40GT 2 mt. hose extension kit for Tiger 40 GT € 225,00KT3TI40S 3 mt. hose extension kit for Tiger 40 S € 187,00KT3TI40A 3 mt. hose extension kit for Tiger 40 A € 187,00KT3TI40LT 3 mt. hose extension kit for Tiger 40 LT € 288,00KT3TI40GT 3 mt. hose extension kit for Tiger 40 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 430x70x35 cm.Wooden pallet dim. 430x70x85 cm. (stackable)
Inground versions: On floor versions:Gross weight: 1800 ÷ 2300 Kg Gross weight: 1900 ÷ 2400 KgNet weight: 1760 ÷ 2260 Kg Net weight: 1860 ÷ 2360 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 9 - max. 12 unitsBy sea: container 20'' box = min. 6 - max. 9 units
10
MONDIAL LIFT | Valid until 30.06.2006
TIGER 40-4200 with platforms L= 4200 mm
TI 40 S UKScissor lift standard model, 4.000 Kg capacity, platforms 3900 mm. € 9.700,00
TI 40 SL UKScissor lift standard model, 4.000 Kg capacity, platforms 4800 mm. € 10.600,00
KI40Kit inground version (4 short ramps) € 216,00KP40Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 794,00
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the baseHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity: 4.000 KgMaximum height: 1775 mm inground version / 2040 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 3900 mm - 4800 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
TIGER 40 SPECIAL MODELS with platforms L= 3900/4800 mm
11MONDIAL LIFT | Valid until 30.06.2006
12
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TITI40/UK Frame for inground installation Tiger S UK 3900mm € 780,00TITI40L/UK Frame for inground installation Tiger SL UK 4800mm € 980,00KLU40 Lighting kit 24V for Tiger € 1.242,00KT1TI40S 1 mt. hose extension kit for Tiger 40 S € 107,00KT1TI40A 1 mt. hose extension kit for Tiger 40 A € 107,00KT1TI40LT 1 mt. hose extension kit for Tiger 40 LT € 162,00KT1TI40GT 1 mt. hose extension kit for Tiger 40 GT € 162,00KT2TI40S 2 mt. hose extension kit for Tiger 40 S € 147,00KT2TI40A 2 mt. hose extension kit for Tiger 40 A € 147,00KT2TI40LT 2 mt. hose extension kit for Tiger 40 LT € 225,00KT2TI40GT 2 mt. hose extension kit for Tiger 40 GT € 225,00KT3TI40S 3 mt. hose extension kit for Tiger 40 S € 187,00KT3TI40A 3 mt. hose extension kit for Tiger 40 A € 187,00KT3TI40LT 3 mt. hose extension kit for Tiger 40 LT € 288,00KT3TI40GT 3 mt. hose extension kit for Tiger 40 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 430x70x35 cm.Wooden pallet dim. 430x70x85 cm. (stackable)
Inground versions: On floor versions:Gross weight: 1800 ÷ 2300 Kg Gross weight: 1900 ÷ 2400 KgNet weight: 1760 ÷ 2260 Kg Net weight: 1860 ÷ 2360 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 9 - max. 12 unitsBy sea: container 20'' box = min. 6 - max. 9 units
TIGER 40 SPECIAL MODELS with platforms L= 3900/4800 mm
MONDIAL LIFT | Valid until 30.06.2006
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the baseHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 4.000 KgMaximum height: 1775 mm inground version / 2040 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 4600 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
TI 40 SScissor lift standard model, 4.000 Kg capacity, platforms 4600 mm. € 9.900,00TI 40 AScissor lift for total alignment, 4.000 Kg capacity, platforms 4600 mm. € 11.200,00TI 40 LTScissor lift standard model with lift-tables, 4.000 Kg capacity, platforms 4600 mm. € 13.460,00TI 40 GTScissor lift for total alignment with lift-tables, 4.000 Kg capacity, platforms 4600 mm. € 14.800,00KI40Kit inground version (4 short ramps) € 216,00KP40Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 794,00
13
MONDIAL LIFT | Valid until 30.06.2006
TIGER 40-4600 with platforms L= 4600 mm
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TITI40 Frame for inground installation Tiger 40 € 964,00KLU40 Lighting kit 24V for Tiger € 1.242,00KT1TI40S 1 mt. hose extension kit for Tiger 40 S € 107,00KT1TI40A 1 mt. hose extension kit for Tiger 40 A € 107,00KT1TI40LT 1 mt. hose extension kit for Tiger 40 LT € 162,00KT1TI40GT 1 mt. hose extension kit for Tiger 40 GT € 162,00KT2TI40S 2 mt. hose extension kit for Tiger 40 S € 147,00KT2TI40A 2 mt. hose extension kit for Tiger 40 A € 147,00KT2TI40LT 2 mt. hose extension kit for Tiger 40 LT € 225,00KT2TI40GT 2 mt. hose extension kit for Tiger 40 GT € 225,00KT3TI40S 3 mt. hose extension kit for Tiger 40 S € 187,00KT3TI40A 3 mt. hose extension kit for Tiger 40 A € 187,00KT3TI40LT 3 mt. hose extension kit for Tiger 40 LT € 288,00KT3TI40GT 3 mt. hose extension kit for Tiger 40 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 470x70x35 cm.Wooden pallet dim. 470x70x85 cm. (stackable)
Inground versions: On floor versions:Gross weight: 1900 ÷ 2400 Kg Gross weight: 2000 ÷ 2500 KgNet weight: 1860 ÷ 2360 Kg Net weight: 1960 ÷ 2460 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 9 - max. 12 unitsBy sea: container 20'' box = min. 6 - max. 9 units
14
TIGER 40-4600 with platforms L= 4600 mm
MONDIAL LIFT | Valid until 30.06.2006
MONDIAL LIFT | Valid until 30.06.2006
TI 45 S UKScissor lift standard model, 4.500 Kg capacity, platforms 3900 mm. € 11.440,00TI 45 SL UKScissor lift standard model, 4.500 Kg capacity, platforms 4800 mm. € 11.220,00TI 45 AScissor lift for total alignment, 4.500 Kg capacity, platforms 4800 mm. € 12.320,00TI 45 LTScissor lift standard model with lift-tables, 4.500 Kg capacity, platforms 4800 mm. € 14.520,00TI 45 GTScissor lift for total alignment with lift-tables, 4.500 Kg capacity, platforms 4800 mm. € 15.620,00KI40Kit inground version (4 short ramps) € 216,00KP40Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 794,00
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the baseHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 4.500 KgMaximum height: 1775 mm inground version / 2040 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 3900mm - 4800 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
15
TIGER 45-3900/4800 with platforms L= 3900/4800 mm
newmodel
MONDIAL LIFT | Valid until 30.06.2006
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TITI40 Frame for inground installation Tiger 40 € 1.010,00TITI40/UK Frame for inground installation Tiger S UK 3900mm € 780,00TITI40L/UK Frame for inground installation Tiger SL UK 4800m € 980,00KLU40 Lighting kit 24V for Tiger € 1.242,00KT1TI40S 1 mt. hose extension kit for Tiger 45 S € 107,00KT1TI40A 1 mt. hose extension kit for Tiger 45 A € 107,00KT1TI40LT 1 mt. hose extension kit for Tiger 45 LT € 162,00KT1TI40GT 1 mt. hose extension kit for Tiger 45 GT € 162,00KT2TI40S 2 mt. hose extension kit for Tiger 45 S € 147,00KT2TI40A 2 mt. hose extension kit for Tiger 45 A € 147,00KT2TI40LT 2 mt. hose extension kit for Tiger 45 LT € 225,00KT2TI40GT 2 mt. hose extension kit for Tiger 45 GT € 225,00KT3TI40S 3 mt. hose extension kit for Tiger 45 S € 187,00KT3TI40A 3 mt. hose extension kit for Tiger 45 A € 187,00KT3TI40LT 3 mt. hose extension kit for Tiger 45 LT € 288,00KT3TI40GT 3 mt. hose extension kit for Tiger 45 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 470x70x35 cm.Wooden pallet dim. 470x70x85 cm. (stackable)
Inground versions: On floor versions:Gross weight: 1900 ÷ 2400 Kg Gross weight: 2000 ÷ 2500 KgNet weight: 1860 ÷ 2360 Kg Net weight: 1960 ÷ 2460 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 9 - max. 12 unitsBy sea: container 20'' box = min. 6 - max. 9 units
16
TIGER 45-3900/4800 with platforms L= 3900/4800 mm
newmodel
Technical features:
Versions: inground / on floorHydraulic synchronism of platforms without any machanical connection between the platformsRack mechanical safety device on the pistonHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the base (20 positions)Internal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)N° 2 connections for compressed air ( we would need to know the dimensions of the junction)On A and GT models: automatic research of two alignment positions
Dati tecnici:
Electric-hydraulic functioning
Maximum height:: 69,88” (1775 mm) inground version80,3” (2040 mm) on floor version
Maximum height lift-tables (mod. GT): 17,7” (450 mm)Platform length: 204,7” (5200 mm)Platform width: 26” (660 mm)Lifting time: 45 sec. main lift
15 sec. lift-tablesMotor: 220 V - 60 Hz - 1phPneumatic supply: 4/8 bar
TI 9000 S-USScissor lift standard model with smooth platforms, capacity 9000 lbs (4500 kg),platforms 204,7”(5200mm) .Ingroun version € 14.125,00On floor version € 14.875,00
TI 9000 A-USScissor lift for total alignment , capacity 9000 lbs (4500 kg),platforms 204,7”(5200mm).Ingroun version € 15.750,00On floor version € 16.500,00
TI 9000 GT-USScissor lift for total alignment with lift-tables , capacity 9000 lbs (4500 kg),platforms 204,7”(5200mm).Ingroun version € 20.250,00On floor version € 21.000,00
17
MONDIAL LIFT | Valid until 30.06.2006
Standard equipment:
No. 4 rubber pads h= 1,5” (40 mm)Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
TIGER 9000 lbs (4500 kg) platforms L= 5200 mm
newmodel
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data
Electric-hydraulic functioningCapacity 4.500 KgMaximum height: 1815 mm inground version / 2150 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 3900 mm - 4200 mm - 4800 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
18
MONDIAL LIFT | Valid until 30.06.2006
LI 45 SScissor lift standard model, 4.500 Kg capacity, platforms4200 mm. € 10.600,00LI 45 S UKScissor lift standard model, 4.500 Kg capacity, platforms3900 mm. € 10.800,00LI 45 SL UKScissor lift for total alignment, 5.000 Kg capacity, platforms4800 mm. € 11.050,00LI 45 A - 4200Scissor lift for total alignment, 4.500 Kg capacity, platforms4200 mm. € 11.900,00LI 45 LT - 4200Scissor lift standard model with lift-tables, 4.500 Kgcapacity, platforms 4200 mm.
€ 14.400,00LI 45 GT - 4200Scissor lift for total alignment with lift-tables, 4.500 Kgcapacity, platforms 4200 mm. € 15.800,00
KI45Kit inground version (4 short ramps) € 216,00
KP45Kit on floor version (2 short ramps + 2 long ramps +3 hose covers) € 1.000,00
KPF45Kit on floor version with wheel stops (2 wheel stops +2 long ramps + 3 hose covers) € 1.000,00
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
LION 45 with platforms L=3900/4200/4800 mm
Standard equipment
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI45-4200 Frame for inground installation Lion 45 L=4200 mm € 880,00TILI45/UK Frame for inground installation Lion 45 S UK 3900mm € 860,00TILI45L/UK Frame for inground installation Lion 45 SL UK 4800mm € 1.010,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI45S 1 mt. hose extension kit for Lion 45 S € 107,00KT1LI45A 1 mt. hose extension kit for Lion 45 A € 107,00KT1LI45LT 1 mt. hose extension kit for Lion 45 LT € 162,00KT1LI45GT 1 mt. hose extension kit for Lion 45 GT € 162,00KT2LI45S 2 mt. hose extension kit for Lion 45 S € 147,00KT2LI45A 2 mt. hose extension kit for Lion 45 A € 147,00KT2LI45LT 2 mt. hose extension kit for Lion 45 LT € 225,00KT2LI45GT 2 mt. hose extension kit for Lion 45 GT € 225,00KT3LI45S 3 mt. hose extension kit for Lion 45 S € 187,00KT3LI45A 3 mt. hose extension kit for Lion 45 A € 187,00KT3LI45LT 3 mt. hose extension kit for Lion 45 LT € 288,00KT3LI45GT 3 mt. hose extension kit for Lion 45 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 430x70x50 cm.Wooden pallet dim. 430x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2200 ÷ 2700 Kg Gross weight: 2400 ÷ 2900 KgNet weight: 2160 ÷ 2660 Kg Net weight: 2360 ÷ 2860 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 8 - max. 10 unitsBy sea: container 20'' box = 6 units
19
MONDIAL LIFT | Valid until 30.06.2006
LION 45-4200 with platforms L=3900/4200/4800 mm
20 MONDIAL LIFT | Valid until 30.06.2006
LI 45 SScissor lift standard model, 4.500 Kg capacity, platforms 4600 mm. € 10.900,00LI 45 AScissor lift for total alignment, 4.500 Kg capacity, platforms 4600 mm. € 12.200,00LI 45 LTScissor lift standard model with lift-tables, 4.500 Kg capacity, platforms 4600 mm. € 14.700,00LI 45 GTScissor lift for total alignment with lift-tables, 4.500 Kg capacity, platforms 4600 mm. € 16.100,00KI45Kit inground version (4 short ramps) € 216,00KP45Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 1.000,00KPF45Kit on floor version with wheel stops (2 wheel stops + 2 long ramps + 3 hose covers) € 1.000,00
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 4.500 KgMaximum height: 1815 mm inground version / 2150 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 4600 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
LION 45-4600 with platforms L=4600 mm
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
21
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI45 Frame for inground installation Lion 45 € 964,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI45S 1 mt. hose extension kit for Lion 45 S € 107,00KT1LI45A 1 mt. hose extension kit for Lion 45 A € 107,00KT1LI45LT 1 mt. hose extension kit for Lion 45 LT € 162,00KT1LI45GT 1 mt. hose extension kit for Lion 45 GT € 162,00KT2LI45S 2 mt. hose extension kit for Lion 45 S € 147,00KT2LI45A 2 mt. hose extension kit for Lion 45 A € 147,00KT2LI45LT 2 mt. hose extension kit for Lion 45 LT € 225,00KT2LI45GT 2 mt. hose extension kit for Lion 45 GT € 225,00KT3LI45S 3 mt. hose extension kit for Lion 45 S € 187,00KT3LI45A 3 mt. hose extension kit for Lion 45 A € 187,00KT3LI45LT 3 mt. hose extension kit for Lion 45 LT € 288,00KT3LI45GT 3 mt. hose extension kit for Lion 45 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 470x70x50 cm.Wooden pallet dim. 470x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2300 ÷ 2800 Kg Gross weight: 2500 ÷ 3000 KgNet weight: 2260 ÷ 2760 Kg Net weight: 2460 ÷ 2960 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 8 - max. 10 unitsBy sea: container 20'' box = 6 units
LION 45-4600 with platforms L=4600 mm
MONDIAL LIFT | Valid until 30.06.2006
22 MONDIAL LIFT | Valid until 30.06.2006
LI 45 SPD UK € 13.000,00Scissor lift standard model with play detector, 4.500 Kg capacity, platforms 4500 mm.
LI 45 SPDScissor lift standard model with play detector, 4.500 Kg capacity, platforms 4800 mm. € 12.900,00
LI 45 APD - 4800Scissor lift for total alignment with play detector, 4.500 Kg capacity, platforms 4800 mm. € 14.200,00
LI 45 LTPD - 4800Scissor lift standard model with lift-tables and play detector, 4.500 Kg capacity,platforms 4800 mm. € 16.700,00
LI 45 GTPD - 4800Scissor lift for total alignment with lift-tables and play detector, 4.500 Kg capacity,platforms 4800 mm. € 18.100,00
KI45Kit inground version (4 short ramps) € 216,00KP45Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 1.000,00KPF45Kit on floor version with wheel stops (2 wheel stops + 2 long ramps + 3 hose covers) € 1.000,00
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 4.500 KgMaximum height: 1815 mm inground version / 2150 mm
on floor versionMaximum height lift-tables: 450 mmPlatform length: 4800 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
LION 45-4800 with play detector - with platforms L=4800 mm
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
23 MONDIAL LIFT | Valid until 30.06.2006
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessori:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI45PD-4800 Frame for inground installation Lion 45 L=4800 mm € 1.010,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI45SPD 1 mt. hose extension kit for Lion 45 SPD € 174,00KT1LI45APD 1 mt. hose extension kit for Lion 45 APD € 174,00KT1LI45LTPD 1 mt. hose extension kit for Lion 45 LTPD € 231,00KT1LI45GTPD 1 mt. hose extension kit for Lion 45 GTPD € 231,00KT2LI45SPD 2 mt. hose extension kit for Lion 45 SPD € 248,00KT2LI45APD 2 mt. hose extension kit for Lion 45 APD € 248,00KT2LI45LTPD 2 mt. hose extension kit for Lion 45 LTPD € 328,00KT2LI45GTPD 2 mt. hose extension kit for Lion 45 GTPD € 328,00KT3LI45SPD 3 mt. hose extension kit for Lion 45 SPD € 321,00KT3LI45APD 3 mt. hose extension kit for Lion 45 APD € 321,00KT3LI45LTPD 3 mt. hose extension kit for Lion 45 LTPD € 424,00KT3LI45GTPD 3 mt. hose extension kit for Lion 45 GTPD € 424,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00- Version for test lines € 504,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing:included
Platforms + control unit + standard equipmentWooden pallet dim. 490x70x50 cm.Wooden pallet dim. 490x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2350 ÷ 2850 Kg Gross weight: 2550 ÷ 3050 KgNet weight: 2310 ÷ 2810 Kg Net weight: 2510 ÷ 3010 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 7 - max. 10 unitsBy sea: container 20'' box = 6 units
LION 45-4800 with play detector - with platforms L=4800 mm
24
MONDIAL LIFT | Valid until 30.06.2006
LI 45 SPDScissor lift standard model with play detector, 4.500 Kg capacity, platforms 5200 mm. € 13.200,00LI 45 APDScissor lift for total alignment with play detector, 4.500 Kg capacity, platforms 5200 mm. € 14.500,00LI 45 LTPDScissor lift standard model with lift-tables and play detector, 4.500 Kg capacity,platforms 5200 mm. € 17.000,00LI 45 GTPDScissor lift for total alignment with lift-tables and play detector, 4.500 Kg capacity,platforms 5200 mm. € 18.400,00KI45Kit inground version (4 short ramps) € 216,00KP45Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 1.000,00KPF45Kit on floor version with wheel stops (2 wheel stops + 2 long ramps + 3 hose covers) € 1.000,00
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 4.500 KgMaximum height: 1815 mm inground version /
2150 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 5200 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
LION 45-5200 with play detector - with platforms L=5200 mm
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
25 MONDIAL LIFT | Valid until 30.06.2006
LION 45-5200 with play detector - with platforms L=5200 mm
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI45PD Frame for inground installation Lion 45 with PD € 1.070,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI45SPD 1 mt. hose extension kit for Lion 45 SPD € 174,00KT1LI45APD 1 mt. hose extension kit for Lion 45 APD € 174,00KT1LI45LTPD 1 mt. hose extension kit for Lion 45 LTPD € 231,00KT1LI45GTPD 1 mt. hose extension kit for Lion 45 GTPD € 231,00KT2LI45SPD 2 mt. hose extension kit for Lion 45 SPD € 248,00KT2LI45APD 2 mt. hose extension kit for Lion 45 APD € 248,00KT2LI45LTPD 2 mt. hose extension kit for Lion 45 LTPD € 328,00KT2LI45GTPD 2 mt. hose extension kit for Lion 45 GTPD € 328,00KT3LI45SPD 3 mt. hose extension kit for Lion 45 SPD € 321,00KT3LI45APD 3 mt. hose extension kit for Lion 45 APD € 321,00KT3LI45LTPD 3 mt. hose extension kit for Lion 45 LTPD € 424,00KT3LI45GTPD 3 mt. hose extension kit for Lion 45 GTPD € 424,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00- Version for test lines € 504,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 530x70x50 cm.Wooden pallet dim. 530x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2400 ÷ 2900 Kg Gross weight: 2600 ÷ 3100 KgNet weight: 2360 ÷ 2860 Kg Net weight: 2560 ÷ 3060 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 7 - max. 10 unitsBy sea: container 20'' box = 6 units
26 MONDIAL LIFT | Valid until 30.06.2006
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 5.000 KgMaximum height: 1815 mm inground version / 2150 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 3900/4800 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
LI 50 S UKScissor lift standard model, 5.000 Kg capacity, platforms 3900 mm. € 11.400,00
LI 50 SL UKScissor lift for total alignment, 5.000 Kg capacity, platforms 4800 mm. € 11.900,00
KP50Kit on floor version (2 short ramps + 2 long ramps +3 hose covers)
€ 1.000,00KPF50Kit on floor version with wheel stops (2 wheel stops + 2 long ramps + 3 hose covers)
€ 1.000,00KI50Kit inground version (4 short ramps)
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
LION 50 SPECIAL MODELS with platforms L= 3900/4800 mm
€ 216,00
27
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI50/UK Frame for inground installation Lion 50 S UK € 1.044,00TILI50L/UK Frame for inground installation Lion 50 SL UK € 1.276,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI45S 1 mt. hose extension kit for Lion 45 S € 107,00KT1LI45A 1 mt. hose extension kit for Lion 45 A € 107,00KT1LI45LT 1 mt. hose extension kit for Lion 45 LT € 162,00KT1LI45GT 1 mt. hose extension kit for Lion 45 GT € 162,00KT2LI45S 2 mt. hose extension kit for Lion 45 S € 147,00KT2LI45A 2 mt. hose extension kit for Lion 45 A € 147,00KT2LI45LT 2 mt. hose extension kit for Lion 45 LT € 225,00KT2LI45GT 2 mt. hose extension kit for Lion 45 GT € 225,00KT3LI45S 3 mt. hose extension kit for Lion 45 S € 187,00KT3LI45A 3 mt. hose extension kit for Lion 45 A € 187,00KT3LI45LT 3 mt. hose extension kit for Lion 45 LT € 288,00KT3LI45GT 3 mt. hose extension kit for Lion 45 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 470x70x50 cm.Wooden pallet dim. 470x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2300 ÷ 2800 Kg Gross weight: 2500 ÷ 3000 KgNet weight: 2260 ÷ 2760 Kg Net weight: 2460 ÷ 2960 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 8 - max. 10 unitsBy sea: container 20'' box = 6 units
MONDIAL LIFT | Valid until 30.06.2006
LION 50 SPECIAL MODELS with platforms L= 3900/4800 mm
28 MONDIAL LIFT | Valid until 30.06.2006
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity 5.000 KgMaximum height: 1815 mm inground version / 2150 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 4600 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
LION 50-4600 with platforms L= 4600 mm
LI 50 S - 4600Scissor lift standard model, 5.000 Kg capacity, platforms4600 mm. € 11.300,00
LI 50 A - 4600Scissor lift for total alignment, 5.000 Kg capacity, platforms4600 mm. € 12.600,00
LI 50 LT - 4600Scissor lift standard model with lift-tables, 5.000 Kgcapacity, platforms 4600 mm. € 15.100,00
LI 50 GT - 4600Scissor lift for total alignment with lift-tables, 5.000 Kgcapacity, platforms 4600 mm. € 16.500,00
KP50Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers)€ 1.000,00
KPF45Kit on floor version with wheel stops (2 wheel stops +2 long ramps + 3 hose covers) € 1.000,00
KI50Kit inground version (4 short ramps)€ 216,00
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
29 MONDIAL LIFT | Valid until 30.06.2006
LION 50-4600 with platforms L= 4600 mm
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI45 Frame for inground installation Lion 45 € 964,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI50S 1 mt. hose extension kit for Lion 50 S € 107,00KT1LI50A 1 mt. hose extension kit for Lion 50 A € 107,00KT1LI50LT 1 mt. hose extension kit for Lion 50 LT € 162,00KT1LI50GT 1 mt. hose extension kit for Lion 50 GT € 162,00KT2LI50S 2 mt. hose extension kit for Lion 50 S € 147,00KT2LI50A 2 mt. hose extension kit for Lion 50 A € 147,00KT2LI50LT 2 mt. hose extension kit for Lion 50 LT € 225,00KT2LI50GT 2 mt. hose extension kit for Lion 50 GT € 225,00KT3LI50S 3 mt. hose extension kit for Lion 50 S € 187,00KT3LI50A 3 mt. hose extension kit for Lion 50 A € 187,00KT3LI50LT 3 mt. hose extension kit for Lion 50 LT € 288,00KT3LI50GT 3 mt. hose extension kit for Lion 50 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 470x70x50 cm.Wooden pallet dim. 470x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2500 ÷ 3000 Kg Gross weight: 2700 ÷ 3200 KgNet weight: 2460 ÷ 2960 Kg Net weight: 2660 ÷ 3160 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 7 - max. 9 unitsBy sea: container 20'' box = 6 units
30
MONDIAL LIFT | Valid until 30.06.2006
LI 50 SScissor lift standard model, 5.000 Kg capacity, platforms 5000 mm. € 11.700,00LI 50 AScissor lift for total alignment, 5.000 Kg capacity, platforms 5000 mm. € 13.000,00LI 50 LTScissor lift standard model with lift-tables, 5.000 Kg capacity, platforms 5000 mm. € 15.500,00LI 50 GTScissor lift for total alignment with lift-tables, 5.000 Kg capacity, platforms 5000 mm. € 16.900,00LI 50 GT PDScissor lift for total alignment with lift-tables, 5.000 Kg capacity, platforms 5000 mm.With play detector integrated. € 19.400,00KI50Kit inground version (4 short ramps) € 216,00KP50Kit on floor version (2 short ramps + 2 long ramps + 3 hose covers) € 1.000,00KPF45Kit on floor version with wheel stops (2 wheel stops + 2 long ramps + 3 hose covers) € 1.000,00
Technical features:
Versions: inground / on floorHydraulic synchronism of platformsRack mechanical safety device on the pistonsHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the baseInternal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)
Technical data:
Electric-hydraulic functioningCapacity: 5.000 KgMaximum height: 1815 mm inground version / 2150 mm on floor versionMaximum height lift-tables: 450 mmPlatform length: 5000 mmPlatform width: 660 mmLifting time: 45 sec. main lift - 15 sec. lift-tablesMotor: 3ph 230/400 V - 3 Kw - 50 HzPneumatic supply: 4/8 bar
Standard equipment:
No. 4 rubber pads h= 40 mm.Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
LION 50-5000 with platforms L= 5000 mm
Note: The price of the lift has to be calculated adding to the basic price the inground or on floor kit.
newmodel
31
LION 50-5000 with platforms L= 5000 mm
Accessories:
CL2-0022 Hose cover L= 0,80 mt. € 21,00TILI50 Frame for inground installation Lion 50 € 1.060,00KLU45 Lighting kit 24V for Lion € 1.242,00KT1LI50S 1 mt. hose extension kit for Lion 50 S € 107,00KT1LI50A 1 mt. hose extension kit for Lion 50 A € 107,00KT1LI50LT 1 mt. hose extension kit for Lion 50 LT € 162,00KT1LI50GT 1 mt. hose extension kit for Lion 50 GT € 162,00KT2LI50S 2 mt. hose extension kit for Lion 50 S € 147,00KT2LI50A 2 mt. hose extension kit for Lion 50 A € 147,00KT2LI50LT 2 mt. hose extension kit for Lion 50 LT € 225,00KT2LI50GT 2 mt. hose extension kit for Lion 50 GT € 225,00KT3LI50S 3 mt. hose extension kit for Lion 50 S € 187,00KT3LI50A 3 mt. hose extension kit for Lion 50 A € 187,00KT3LI50LT 3 mt. hose extension kit for Lion 50 LT € 288,00KT3LI50GT 3 mt. hose extension kit for Lion 50 GT € 288,00KTG20 Kit of rubber pads h=20 mm. (4 pcs.) € 57,00KTG40 Kit of rubber pads h=40 mm. (4 pcs.) € 80,00KTG80 Kit of rubber pads h=80 mm. (4 pcs.) € 103,00KTVS1 Kit of cross beams for special vehicles € 535,00CP1-0082 Jacking beam for three wheels € 590,00
Further available options:
Special motor 1ph 50Hz € 352,00Special motor 1ph 60Hz € 440,00Special motor 3ph 60Hz € 60,00Special colours on requestSpecial treatments on request
Standard packing: includedPlatforms + control unit + standard equipmentWooden pallet dim. 510x70x50 cm.Wooden pallet dim. 510x70x105 cm. (stackable)
Inground versions: On floor versions:Gross weight: 2600 ÷ 3100 Kg Gross weight: 2800 ÷ 3300 KgNet weight: 2560 ÷ 3060 Kg Net weight: 2760 ÷ 3260 Kg
Special packing for shipments by sea: on requestWooden box: lift + control unit + standard equipment
Q.ty for shipment:By land: complete truck = min. 7 - max. 9 unitsBy sea: container 20'' box = 6 units
MONDIAL LIFT | Valid until 30.06.2006
Technical features:
Versions: inground / on floorHydraulic synchronism of platforms without any machanical connection between the platformsRack mechanical safety device on the pistonHydraulic safety using parachute valveOverload security valveLowering control valvePhotoelectric sensor device for platform levellingRegulation pins for the levelling of the base (20 positions)Internal guide on the platforms for auxiliary lift sliding and slot for lighting systemManual lowering device in case of power failureAcoustic and light signal for final lowering phaseLow voltage controls (24V)N° 2 connections for compressed air ( we would need to know the dimensions of the junction)On A and GT models: automatic research of two alignment positions
Dati tecnici:
Electric-hydraulic functioning
Maximum height:: 71,4” (1815 mm) inground version84,6” (2150 mm) on floor version
Maximum height lift-tables (mod. GT): 17,7” (450 mm)Platform length: 204,7” (5200 mm)Platform width: 26” (660 mm)Lifting time: 45 sec. main lift
15 sec. lift-tablesMotor: 220 V - 60 Hz - 1phPneumatic supply: 4/8 bar
LI 12000 S-USScissor lift standard model with smooth platforms, capacity 12000 lbs (5500 kg),platforms 204,7”(5200mm) .Ingroun version € 16.125,00On floor version € 17.125,00
LI 12000 A-USScissor lift for total alignment , capacity 12000 lbs (5500 kg),platforms 204,7”(5200mm).Ingroun version € 17.750,00On floor version € 18.750,00
LI 12000 GT-USScissor lift for total alignment with lift-tables , capacity 12000 lbs (5500 kg),platforms 204,7”(5200mm).Ingroun version € 22.625,00On floor version € 23.625,00
32
MONDIAL LIFT | Valid until 30.06.2006
Standard equipment:
No. 4 rubber pads h= 1,5” (40 mm)Kit of hoses/cables for control unit at 2 mt. distanceSide slides for auxiliary jacking beamStandard colours: red RAL 3000 or blue RAL 5015
LION 12000 lbs (5500 kg) platforms L= 5200 mm
newmodel
JAGUAR 30 HYDROElectro-hydraulic lift without base, capacity 3000 kg, motor 3ph 50Hz. € 4.600,00
* Additional charge for motor 1ph 50 Hz € 200,00
Technical features:
Highly efficient and economical hydraulic driveFree set of PED adaptorsAsymmetrical designHeight limit control switch
Technical data
Capacity: 3000 kgLifting time: 60 scPower system: 3/N/PE AC 400V/230V/50HzMotor: 2,2 kWNominal weight: 521 kgMax. lift height: 1750 mmMax. height of arms: 1851 mmTotal height: 3670 mmMax. clearance distance of posts:2565 mmMax. clearance width:2160 mmTotal width: 3035 mmExtension of short arm: 570-890 mmExtension of long arm: 930-1480 mm
MONDIAL LIFT | Valid until 30.06.2006
JAGUAR 30 HYDRO Automotive hidraulic two post lift
33
newmodel
JAGUAR 40 HYDRO Automotive hidraulic two post lift
MONDIAL LIFT | Valid until 30.06.2006
JAGUAR 40 HYDROElectro-hydraulic lift without base, capacity 4000 kg, motor 3ph 50Hz.
Jaguar 40 HYDRO - H=3670 mm € 5.440,00Jaguar 40 HYDRO - H=4000 mm € 5.540,00Jaguar 40 HYDRO - H=4200 mm € 5.640,00Jaguar 40 HYDRO - H=4650 mm € 5.740,00
* Additional charge for motor 1ph 50 Hz € 240,00
Technical features:
Highly efficient and economical hydraulic driveFree set of PED adaptorsAsymmetrical designHeight variabilityHeight limit control switch
Technical data:
Capacity: 4000 kgLifting time: 60 scPower system: 3/N/PE AC 400V/230V/50HzMotor:2,2 kWNominal weight: 650 kgMax. lift: 1750 mmMax. height of arm: 1851 mmTotal height: 3670, 4000, 4200, 4650 mmTotal width: 3035 mmExtension of short arm: 570-890 mmExtension of long arm: 930-1480 mm
34
newmodel
JAGUAR 55 HYDRO Automotive hidraulic two post lift
MONDIAL LIFT | Valid until 30.06.2006
JAGUAR 55 HYDROElectro-hidraulic lift without base, capacity 5500 kg, motor 3ph 50Hz.Jaguar 55 HYDRO - H=4000 mm € 7.200,00Jaguar 55 HYDRO - H=4300 mm € 7.300,00Jaguar 55 HYDRO - H=4600 mm € 7.400,00Jaguar 55 HYDRO - H=4900 mm € 7.500,00
Technical features:
Higlhly efficient and economical hydraulic driveFree set of PED adaptorsVariety of heightsHeight limit control switch
Technical data:
Capacity: 5500 kgLifting time: 60 scPower system: 3/N/PE AC 400V/230V/50HzMotor: 3,0 kWNominal weight: 856, 878, 900, 922 kgMax. lift height: 1850 mmMax. height of arm: 1985 mmTotal height: 4006, 4306, 4606, 4906 mmTotal width: 3600 mmExtension of arm: 700-1421 mm
* Additional charge for motor 1ph 50 Hz € 260,00
35
newmodel
36
MONDIAL LIFT | Valid until 30.06.2006
PLAY DETECTOR for inground installation
PD-I Play detector 4 movements, inground version € 3.750,00
Technical features:
Electric-hydraulic functioning3,5 lt/min pump40mm plate clearance (longitudinal and trasversal) resulting from a diagonal and vertical movementwhich goes to position zero when the torch selector is releasedTorch made of shock-resistant material with a 0,7A lampHydraulic thrust of 7691N with max working pressure of 160 barThe upper plates are painted with an antiskid treatmentMechanical sliding system of the plate by sliding blocks (no. 8 pcs. for each plate)Hydraulic sliding system of the plate by pistons (no. 4 for each plate)
Standard equipment:
Power unit with electric-hydraulic operationTorch with selectorStandard colour: black RAL 9017 with control unit in red colour RAL 3000 or blue RAL 5015
Standard packing: included Play detector + standard equipment
37
MONDIAL LIFT | Valid until 30.06.2006
JACKING beams
JK2M Jacking beam, 2.000 Kg capacity, hand operated manual pump € 2.138,00
JK2P Jacking beam, 2.000 Kg capacity, air pneumatic operated pump € 2.702,00
JK2,8M Jacking beam, 2.800 Kg capacity, hand operated manual pump € 2.940,00
JK2,8P Jacking beam, 2.800 Kg capacity, air pneumatic operated pump € 3.360,00
Technical features:
Special profile suitable for all Tiger and Lion modelsTwo-position mechanical lockFinger guardsPressure-release valve to prevent overloading
Technical data:
Width when extended: 1605 mmWidth when retracted: 800 mm for models with 2.000 Kg capacity
815 mm for models with 2.800 Kg capacityMinimum width over support arms: 790 mmMax. width over support arms: 1125 mm for models with 2.000 Kg capacity
1130 mm for models with 2.800 Kg capacityClosed height: 210 mm for models with 2.000 Kg capacity
235 mm for models with 2.800 Kg capacityTotal lift: 205 mm
Standard equipment:
No. 2 aluminium blocks h=25 mmNo. 2 special supportsStandard colour: black RAL 9005
Standard packing: includedJacking beam + standard equipment
38
MONDIAL LIFT | Valid until 30.06.2006
GENERAL Sale conditions
The prices are considered Ex-Works.The orders are confirmed with the general sale conditions but they are subject to the approval of MondialLift S.r.l.The shipments are made at the buyer's risk, using the forwarder indicated by the customer but without anyresponsability. In case of delay, damage or loss during the transport, any relative action towards theforwarder will have to be made by the buyer.Delivery terms are considered approximate. Eventual delays do not give neither the right of compensationfor damages nor the right to cancel the order.The payment of the invoices has to be made directly to us. We do not accept any deduction or roundingoff. On delayed payments we will charge bank interest and any involved expenses.Our products have a 12 months warranty.For any controversy or resolution of any objections, we acknowledge the exclusive authority of the Courtof Justice of Chieti.