Pressure & Flow Control Industries 823 GIDC Estate, Makarpura,Vadodara 10 Ph: 0265-2645727 Cell: 094263 24251 Email: [email protected]COMPANY PROFILE Pressure & Flow Control Industries (PFCI) roots traced back to 1975 when Mr B M Pandya & Mr J M Pandya incorporated a registered partnership firm ( Family partnership ) in the field of Manufacturing Instrumentation products for pressure & Vacuum measurements under the trade name PRECON ® . PFCI operates from its headquarter located at 823 GIDC Industrial Estate, Makarpura, Vadodara 390 010, Gujarat ( West province of INDIA) which is well connected with Rail, Road & Air route. PFCI has a wide spread networks in nearly 20 countries. With continuous research & development and encouragements assisted by customer at various stages, In 1977 PFCI has started design and manufacturing import substitute products - Flame Arrester, Pressure Vacuum relief valves, emergency vent manhole cover, Gauge Hatch, Slot dipping devices & tank mounting accessories for use in Oil/Gas/Petrochemical/Fertilizer/Pharmaceuticals etc. In 1997 the second generation actively participated in the organization and took over the leadership with firmness and modern vision. As a part of continual improvements in manufacturing of quality goods to meet customer’s requirements, PFCI has developed in house test equipment’s for testing its products in compliance with national and international standards. In 2006 Proto Type Performance test for Gas Group IIA/IIB and IIC ( IS 2148-2004 equivalent EN ISO 60079) carried out for Flame Arrester as per IS 11006-1984 by Central Mining Research Institute (Council for Scientific & Industrial Research) GOVT of INDIA. In 2006 Petroleum & Explosive Safety Organization issued approval letter for use of Pre’con ® Flame Arrester in their installation. In 2008 by complying international standards and documents, PFCI was awarded ISO 9001 2000 certification by TUV Nord, Accredited by NABCB. In 2009 Shop survey carried out by BVIS for Design, Manufacturing and in-house test facility for entire Pre’con ® product range. In 2009 Proto Type Performance test for Gas Group IIA/IIB and IIC ( IS 2148-2004 equivalent EN ISO 60079) carried out for entire manufacturing range of Flame Arrester as per IS 11006-1984 by Central Mining & Fuel Research Institute (Council for Scientific & Industrial Research) GOVT of INDIA. In 2009 obtained venting capacity certification for all models of Breather valve, Emergency relief valves in accordance to API 2000 from BVIS. In 2009 PFCI is registered with leading Project Management Consultant M/s ENGINEERS INDIA LTD , TOYO GLOBAL,LINDE ENGINEERING INDIA LTD, TECHNIMONT (ITALY) , AKER Power Gas, PETRONAS ( MALAYSIA), PETROFAC ( UAE), PERTAMINA (INDONESIA), MOTT Macdonald, STATE COMPANY FOR OIL PROJECT (IRAQ) Etc.
23
Embed
Pressure & Flow Control Industries · Pressure & Flow Control Industries 823 GIDC Estate, Makarpura,Vadodara 10 Ph: 0265-2645727 Cell: 094263 24251 Email: [email protected] In 2010
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Pressure & Flow Control Industries (PFCI) roots traced back to 1975 when Mr B M Pandya & Mr J M Pandya incorporated a registered partnership firm ( Family partnership ) in the field of Manufacturing Instrumentation products for pressure & Vacuum measurements under the trade name PRECON®.
PFCI operates from its headquarter located at 823 GIDC Industrial Estate, Makarpura, Vadodara 390 010, Gujarat ( West province of INDIA) which is well connected with Rail, Road & Air route.
PFCI has a wide spread networks in nearly 20 countries.
With continuous research & development and encouragements assisted by customer at various stages, In 1977 PFCI has started design and manufacturing import substitute products - Flame Arrester, Pressure Vacuum relief valves, emergency vent manhole cover, Gauge Hatch, Slot dipping devices & tank mounting accessories for use in Oil/Gas/Petrochemical/Fertilizer/Pharmaceuticals etc.
In 1997 the second generation actively participated in the organization and took over the leadership with firmness and modern vision.
As a part of continual improvements in manufacturing of quality goods to meet customer’s requirements, PFCI has developed in house test equipment’s for testing its products in compliance with national and international standards.
In 2006 Proto Type Performance test for Gas Group IIA/IIB and IIC ( IS 2148-2004 equivalent EN ISO 60079) carried out for Flame Arrester as per IS 11006-1984 by Central Mining Research Institute (Council for Scientific & Industrial Research) GOVT of INDIA.
In 2006 Petroleum & Explosive Safety Organization issued approval letter for use of Pre’con® Flame Arrester in their installation.
In 2008 by complying international standards and documents, PFCI was awarded ISO 9001 2000 certification by TUV Nord, Accredited by NABCB.
In 2009 Shop survey carried out by BVIS for Design, Manufacturing and in-house test facility for entire Pre’con® product range.
In 2009 Proto Type Performance test for Gas Group IIA/IIB and IIC ( IS 2148-2004 equivalent EN ISO 60079) carried out for entire manufacturing range of Flame Arrester as per IS 11006-1984 by Central Mining & Fuel Research Institute (Council for Scientific & Industrial Research) GOVT of INDIA.
In 2009 obtained venting capacity certification for all models of Breather valve, Emergency relief valves in accordance to API 2000 from BVIS.
In 2009 PFCI is registered with leading Project Management Consultant M/s ENGINEERS INDIA LTD , TOYO GLOBAL,LINDE ENGINEERING INDIA LTD, TECHNIMONT (ITALY) , AKER Power Gas, PETRONAS ( MALAYSIA), PETROFAC ( UAE), PERTAMINA (INDONESIA), MOTT Macdonald, STATE COMPANY FOR OIL PROJECT (IRAQ) Etc.
In 2010 PFCI was awarded contract worth US $ 329000.00 by Elite home Group, Jordan. for various projects of State Company for Oil Projects (Iraq).
In 2011 ISO 9001-2008 is renewed by Underwriters Lab (UL) accredited by ANAB.
In 2015-2016 proto type performance test for different models of Flame Arrester conducted in accordance to ATEX directives 94/9/EC and 2014/34/EU by European Notified body.
In 2016 proto type performance test for Breather valve with inbuilt Flame Arrester conducted in accordance to ATEX directives 94/9/EC & 2014/34EU by European Notified body.
Based on successful completion of above test we have got marking of our products.
Today, Pre’con® is the only Indian manufacturer having product performance test certification as per the latest International test standards.
The Management express their gratitude and thanks to over more than 400 satisfied customers all over India & abroad for their support encouragement & confidence they had and have in our products.
LEGAL STATUS REGISTERED PARTNERSHIP FIRM
YEAR OF ESTABLISHMENTS:
INFRASTRUCTURE FACTORY PLOT 1425 SQ. METERS.
WORK SHOP 3000 SQ. FT. ASSEMBLY AND INSPECTION 2400 SQ.FT.
STORE 2500 SQ.FT. ADMISTRATION AND MARKETING 2000 SQ.FT.
Based on the Pressure Equipment Directives PED 2014/68/EU products are certified for CE mark as per SEP Module.
VENT CAPACITY CERTIFIED IN ACCORDANCE TO API 2000 –ISO 28300.
Inspection report no: Pre&Flow/Breather Valve/01.
EMERGENCY PRESSURE RELIEF VALVE
VENT CAPACITY CERTIFIED IN ACCORDANCE TO API 2000- ISO 28300.
FLAME ARRESTER
END OF LINE DEFLAGRATION Model No: 20501 IN LINE DEFLAGRATION Model No: 20502 IN LINE DETONATION Model No: 20503 END OF LINE DEFLAGRATION ( HIGH TEMPERATURE) Model No: 20504 PERFORMANCE TEST OF ALL ABOVE FLAME ARRESTER MODELS CONDUSTED AND CERTIFIED AS PER ATEX Directives 94/9/EC & 2014/34/EU.
TEST STANDARD : ISO 16852
BREATHER VALVE WITH FLAME ARRESTER
PRESSURE & VACUUM RELIEF VALVE WITH FLAME ARRESTER Model No: 2053-CV-PVR PRESSURE & RELIEF VALVE WITH FLAME ARRESTER Model No: 2053-CV-PR VACUUM RELIEF VALVE WITH FLAME ARRESTER Model No: 2053-CV-VR PERFORMANCE TEST OF BREATHER VALVE WITH FLAME ARRESTER CONDUSTED AND CERTIFIED AS PER ATEX Directives 94/9/EC
TEST STANDARD : ISO 16852
New Indian Standard IS 16485
The Indian Standard IS 16485 is now identical with ISO 16852:2010 'Flame arresters - Performance requirements, test methods and limits for use' issued by the International Organization for Standardization. Therefore all flame arresters, which were tested according to ISO 16852:2010, fulfil the requirements of IS 16485.