PRESENTS THE MOST ENVIRONMENTALLY-FRIENDLY OILFIELD CHEMICAL TO EVER COME TO MARKET:
Dec 25, 2015
Huge sums of money are spent each year in order to:
REDUCE VISCOSITY
OPTIMIZE FLOW RATESPREVENT PARAFFIN
WAX DEPOSITION
PREVENT CORROSION
REDUCEPOUR POINT
PREVENT FORMATION OF ASPHALTENES
ELIMINATE SLUDGE
CLEAN AND DISPOSE TOXIC
WASTE
is THE SOLUTION that will finally remove these problems and reduce expenses for
the entire industry.
Enhanced Oil Recovery Efficiency
Oil Well Cleaning and Efficiency
Abandoned and Stripper Well Recovery
Gas Condensate Production Efficiency
Storage Tank Cleaning and Clean-Up
Pipeline Flow Assurance and Efficiency
Rail and Port Transloading Efficiency
Storage and Vessel Tank Cleaning and Clean-Up
Refinery Operations Efficiency
Storage and Distribution Vessel Tank Cleaning
Heating Oil and Diesel Fuel Efficiency
Clean-Up
does not contain any fluorocarbons
is non-chlorinated
requires no special handling
does not have a flashpoint
is non-flammable
is non-toxic
is Hazmat Rated 0000
is environmentally friendly
is three to five times more efficient, on a volume basis, than any other paraffin wax dispersant,
inhibitor, or depressant on the market.
addresses by secondary effect: corrosionoil flowdegassingasphaltenesdewateringemulsification
NO OTHER ADDITIVES MAY BE REQUIRED
is mosteffective
whenapplied
exclusively
Returning wax precipitation to liquid phase decreases oil
viscosity, which immediately provides secondary benefits in flow and lowers costs due
to less heating of oil.
REDUCING VISCOSITY
returns wax precipitation
to liquid phase
increases netbacks for producers and higher revenues for investors through the efficient and environmentally-responsible
production, transport, storage, and refining of oil and gas resources.
FloWell mitigated a severe wax problem and doubled the flow rate in a 27-mile long deep-water exporting pipeline for a major
U.S. oil platform operator in the
Gulf of Mexico.
COLD-START RESULTS
Problems with a compressors led to a shut-in of 128 hours (just over five days).
With FloWell in the standing oil within the pipeline, THE POUR POINT WAS NEVER REACHED
at any time during the shut-in.
OIL BEGAN FLOWING IMMEDIATELY AND EXCEEDED PRE-SHUT-IN FLOW RATES THE VERY FIRST HOUR!
PLATFORM ENGINEER COMMENTS
"I ranked myself as one of the worst skeptics. What I have seen and done with FloWell has made me a
firm believer and I am now an advocate of of FloWel!"
“ FloWell was a miracle chemical for us, and we all said there was no way possible it would
work. But we were all very pleased
to be proved wrong.”
is universally effective and efficient, and greatly enhances the economic viability of high wax
and/or heavy and viscous crude oils.
Petrochem Green Solutions will assist youand provide you with a cost-effective and
environmentally-friendly FloWell solution.
PeGreSol’s team of experts and material handling engineers will develop an application methodology to meet your specific needs in order to bring your operation efficiency up to 100% and keep it there
as long as FloWell is in use!
Contact Us Now
Please write us and our local partner representative will contact you within 24-hours.
Email: [email protected]
www.alphakensington.com.my