XtremST
XtremSUB – SEA
XtremCORR
XtremCORR+
Xtrem HT
Xtrem pH
Xtrem pHt
Xtrem MARINE-
KOTE
XtremPRIM10Xtrem
PRIM16
Engineered flexible composite coatings. Ultimate resins with
high micro-ceramics and nano particles
technology reinforcement
Products
Xtrem- MARINE KOTE, flexible, one-coat, two components, 100%
solids, epoxidicnovolac ceramic filled coating, providing excellet
corrosion and abrasion resistance in seawater and marine
environments.Optioanally: Special wide spectrum crystallized
biocide for bio corrosion protection
Xtrem-ST one coat, two component solvent free epoxy
coatingtolerant to poor surface treatement, slightly rusted
surfaces, etc.provinding chemical and abrasion resistance to a wide
kind ofsubstrates. It can be manufactured for manual (M) or as a
sprayableproduct application (S).
Xtrem-SUBSEA two component solvent free epoxy coating , tolerant
tomoisture and water during the application, can be applied to
differentsubstrates like metal or concrete. It can be provided for
manual (M)orsprayable application (S).The fresh coat can cure in
wet conditions and even in the water in differenttemperatures.
Xtrem-CORR, two component, solvent free, micro ceramic and
nanotechnology filled novalac resin, with outstanding resistance
tochemical and crude oil media, against corrosion and
abrasion.Application on different substrates, for high temperature
services.
Xtrem-CORR+ two component, solvent free, micro ceramic and
nanotechnology silanized filled novalac resin, additived with PTFE,
for betterlubricity, with outstanding corrosion resistance to
chemicals and crude oilmedia, against corrosion and abrasion.
Application on different substrates, inhigh service temperatures up
to 150ºC.
Xtrem-HT two component, solvent free, micro ceramic and nano
technology fillednovalac resin, specially reinforced with glass
spheres for outstanding resistance tochemical and crude oil media,
against corrosion and abrasion, with certain isolationproperties.
Application can be done directly on hot surfaces (service crude oil
pipes).
Xtrem-pH Specific highly resistant thin film coating to acids
like sulphuric acid 98%,based on a 100 % novolac resin with a amine
reacting modified cicloaliphatic curingagent.Specially engineered
against chemical corrosion and abrasion for steel tanks,reactors,
pipes, etc.
Xtrem-pHT “premium” coating based in a vinyl ester novolac
resin,low VOC content, for chemical expositon to high
temperatures,resistant to thermal cycles, in highly agressive
organic acid or alcalies,solvents, etc. Very low permeability. On
metal surfaces.
Xtrem-VC, 2-Layer system (primer and veil coat), high
performance modifiednovolac vinyl ester coating for concrete
protection , where extreme chemicalresistance and very low
permeation is required like highly concentrated acid like85%
Phosphoric acid, 37% Hydrochorica acid or alkalies, solvents. etc.
even incontinuous inmersion
Xtrem-PRIM10, Xtrem- PRIM16 (concrete primer)Xtrem-PRIM10 Two
component solvent free epoxy primer, used for concrete
applications, asa primer for a < 6% HR on concrete. Specific use
as vapour barrier and from out-sidemoisture. Xtrem-PRIM16
conventional use priming systems on normal concrete surfaces
Xtrem-Polymers
Xtrem SL
Storage tanks
Pipes and equipmentsOff-shore and crude oil industries
Chemical Industry Bio-gas Potable waterWaste water treatment
plants
Reactor tanksSecondary containment and basinsGas ducts
/scrubbers
ComplementsXtrem-Polymers
Xtrem PASIV
Xtrem ChlorideRemover
Xtrem pHC
Xtrem VC
XtremSiCs/m
Cleaning solution, de-rusting and phosphatingsolution for
metalic surfaces structures.
Ultimate formula, highly concentratedDesaltering/dechlorating
solution/foam formetalic surfaces
High built two-components special composite, highlyreinforced
with SiC (silicium carbide) and nano-particles against high
abrasion on different substrates.Two version available:
sprayable/roller or spatula.
Xtrem-pH C Highly chemical resistant and wear resistant, low
viscosity,thin film 100% novolac epoxy for aggressive media for
concreteprotection, i.e. Sulphuirc acid 98%, Sodium Hydroxide 50%,
etc. even incontinuos inmersion. No priming is needed on regular
and cohesiivedconcrete.
Xtrem-SL100% solids, advanced reinforced ceramic thin film
coating to protectmetal structures and equipment in extreme
immersion services likeslurries, mineral processing, etc .for
piping and floating cells. Improvethe flow of the materials.. Low
friction coating
ww.Xtrem-Polymers.comby BV-Corrosion Consulting, S.L.
Distributed and applied by:
GARAY RECUBRIMIENTOS SLPol Ind El Campillo II, parcela P
11.148500 ABANTO Y ZIÉRBENASpain
Xtrem-PolymersProduct line
Xtre
mKO
TE
MAR
INE
Xtre
mSU
B SE
A
Xtre
mST
S/M
Xtre
mCO
RR
Xtre
mCO
RR+
Xtre
mHT X
trem
pH Xtr
empH
t
Xtre
mSL Xt
rem
pH C
Xtre
mVC Xt
rem
PRIM
10/1
6
External lining - - - - - - -Inside lining -
Substrate: steel DumpedsurfacesSlightlyRusted
surfaces - - -
Substrate: concrete, cements, etc * * * * * * - - * Concrete
priming systemsApplication methods
Off-shore, seawater, marine envir. - - - -Light chemicals
Chemicals, solvents (consult us) - - - - - Moderate abrasion Severe
abrasion - - - - - - - - - -Solids on compound 100 % 100 % 100 %
100 % 100 % 100 % 100 % 93 % 100 % 100 % 93 % 100 %
Temperature resistance- immersion-
80 °C 80 °C 100º C 130 °C 130 °C 140 °C 60 °C 135 °C 65 °C 40 °C
130 °C 60 ºC
Temperature resistance- dry-
90 °C 90 °C 120 °C 150 °C 150 °C 170 °C 150 °C 180 °C 120 °C 80
°C 200 °C 80ºC
Adhesion (*bonding strength)> 34
N/mm2> 27
N/mm237
N/mm2> 27
N/mm2> 41
N/mm2> 27
N/mm2> 32
N/mm2> 16
N/mm2> 23
N/mm2> 21
N/mm2*3,8
N/mm2*30
N/mm2
Abrasion resistance(ASTM D4060) 58 mg 80 mg 53 mg 80 mg 48 mg 80
mg N/A N/A 26 mg* N/A N/A N/A
Optional: Anti-static properties - - - - - - - - - - -
Cathodic disbonding test - - - - - - - - -Optional: protección
against SRB biological corrosión - - - - - - - - - -ISO 20340 Metal
constructions and structures in Off-shore - - - - - - - -
-Optional: BAW approval Im 1 - for fresh and inland water - - - - -
- - - - - -
ISO 12944-2, Categories C5-M and IM1-3 , > 15 years - - - - -
- - - -
Salt spray test DIN EN ISO 9227:2006-10 10.000 h 10.000 h
- 10.000 h - - - - - - - -
Autoclave test with explosive decompressions (natural gas, 100
bar, 100 °C)
- - - - - - - - - - -
Thermo-Shock Test(30 min. 180 °C + 30 min. 0 °C - 1000
cycles)
- - - - - - - - - - -
Diluted acids - - - Concentrated acids, solvents, etc. - - - -
-
Manufactured in Germany (EUROPE) certified ISO 9001-2015
factories
The information provided in the brochure is for information only
and has no contractual validity.We are not responsible for
typographical errors, out-of-date data, erroneous images, or
anyother circumstance that affects the validity or accuracy of the
contents which includes.
Número de diapositiva 1Número de diapositiva
2Xtrem-Polymers_interior_ENG - ENCOUNTER.pdfNúmero de diapositiva
1