Page 1/8 Material Safety Data Sheet Printing date /2013 Reviewed on 1 Identification of the substance/mixture and of the company/undertaking Product identifier Trade name: PREPRUFE®, PREPRUFE® WATERPROOFING MEMBRANES, PREPRUFE® TAPES MSDS ID Number: M-859 Details of the supplier of the safety data sheet Manufacturer/Supplier: W.R. Grace & Co. -Conn. Grace Canada, Inc. 62 Whittemore Avenue 294 Clements Road W. Cambridge, MA 02140 USA Ajax, Ontario L1S 3C6 Canada Information department: Environmental Health & Safety USA: +1-617-876-1400 (24 hours) +1-800-354-5414 (8AM - 5PM) Not functional within Massachusetts In Canada: +1-905-683-8561 Transport Emergency: Chemtrec +1-800-424-9300 (24 hours) 2 Composition/information on ingredients Description: Mixture of the substances listed below with nonhazardous additions. Hazardous components: 64742-52-5 Distillates (petroleum), hydrotreated heavy naphthenic 10-20% 68478-07-9 Hydrocarbon Resin 50-100% 3 Hazards identification Classification of the substance or mixture Classification system: The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data. Safety phrases: Do not breathe gas/fumes/vapor/spray. Do not breathe smoke Avoid contact with skin and eyes. Take off immediately all contaminated clothing. Wear suitable gloves. Information pertaining to particular dangers for man and environment: Inhalation: Not expected to cause respiratory irritation. Eye Contact: May be slightly irritating to the eyes. Skin Contact: May be irritating to the skin on prolonged contact. (Cont. on page 2) USA
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1/8Material Safety Data Sheet
Printing date 11/12/2013 Reviewed on 11/12/2013
DR
1 Identification of the substance/mixture and of the company/undertaking
Details of the supplier of the safety data sheetManufacturer/Supplier:
W.R. Grace & Co. -Conn. Grace Canada, Inc. 62 Whittemore Avenue 294 Clements Road W.Cambridge, MA 02140 USA Ajax, Ontario L1S 3C6 Canada
Information department:
Environmental Health & SafetyUSA: +1-617-876-1400 (24 hours) +1-800-354-5414 (8AM - 5PM) Not functional within Massachusetts In Canada: +1-905-683-8561
Transport Emergency: Chemtrec +1-800-424-9300 (24 hours)
2 Composition/information on ingredients
Description: Mixture of the substances listed below with nonhazardous additions.Hazardous components:64742-52-5 Distillates (petroleum), hydrotreated heavy naphthenic 10-20%68478-07-9 Hydrocarbon Resin 50-100%
3 Hazards identification
Classification of the substance or mixtureClassification system:The classification was made according to the latest editions of international substances lists, and expanded upon fromcompany and literature data.
Safety phrases:Do not breathe gas/fumes/vapor/spray.Do not breathe smokeAvoid contact with skin and eyes.Take off immediately all contaminated clothing.Wear suitable gloves.
Information pertaining to particular dangers for man and environment:Inhalation: Not expected to cause respiratory irritation.Eye Contact: May be slightly irritating to the eyes.Skin Contact: May be irritating to the skin on prolonged contact.
Description of first aid measuresGeneral information:
After inhalation:
Take affected persons into fresh air and keep quiet.
Seek immediate medical advice.
After skin contact:Immediately wash contaminated skin with soap or mild detergent and water. If this chemical soaks clothing,immediately remove clothing and wash skin.
If skin irritation continues, consult a doctor.
Seek immediate medical advice.
After eye contact:
Rinse opened eye for several minutes under running water.
Seek immediate medical advice.
After swallowing: Do not induce vomiting; immediately call for medical help.
5 Firefighting measures
Extinguishing mediaSuitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Advice for firefightersProtective equipment: Wear self-contained respiratory protective device.
Additional information Collect contaminated fire fighting water separately. It must not enter the sewage system. USA
Environmental precautions:Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:Contain and/or absorb spill with inert material (i.e. sand, vermiculite) then place in a suitable container.
Reference to other sections No dangerous substances are released.
7 Handling and storage
Handling:Precautions for safe handling
Open and handle receptacle with care.
Store in original containers.
Information about protection against explosions and fires:Empty containers may retain hazardous residue, both liquid and vapor.
Conditions for safe storage, including any incompatibilitiesStorage:
Information about storage in one common storage facility: No special measures required.
Further information about storage conditions:
Protect from frost.
Store in cool, dry conditions in well sealed receptacles.
8 Exposure controls/personal protection
Additional information about design of technical systems: No further data; see item 7.
Control parametersComponents with limit values that require monitoring at the workplace:64742-52-5 Distillates (petroleum), hydrotreated heavy naphthenicPEL
Additional information: The lists that were valid during the creation were used as basis.
Exposure controlsPersonal protective equipment:
General protective and hygienic measures: Avoid contact with the eyes and skin.
Breathing equipment: Not necessary if room is well-ventilated.
Protection of hands:Gloves should be worn to prevent skin contact and should be impermeable and resistant to the product.
Material of glovesGloves should be impermeable and resistant to the product. Selection of material should be considered before use.
Rubber gloves.Penetration time of glove materialThe exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection:
Safety glasses
Face protectionSafety glasses with side shields should be worn to prevent contact due to splashing. Under high vapor mistconcentrations, tightly sealed goggles should be worn.
Body protection: Protective work clothing
9 Physical and chemical properties
Information on basic physical and chemical propertiesGeneral InformationAppearance:
Form: SolidColor: According to product specification
Odor: Characteristic
Change in conditionMelting point/Melting range: Undetermined.Boiling point/Boiling range: Undetermined.
Flash point: Not applicable.Auto igniting: Product is not selfigniting.Danger of explosion: Product does not present an explosion hazard.Density at 20°C (68°F): ~1 g/cm³ (~8.345 lbs/gal)Solubility in / Miscibility with
Uncleaned packagings:Recommendation: Disposal must be made according to official regulations.
14 Transport information
DOT regulations:Hazard class: -
Land Transport ADR/RID (cross-border):ADR/RID class: -
-
Inland shipping ADN:ADN/R Class: -
Maritime Transport IMDG:IMDG Class: -
- Marine pollutant: No
Air Transport ICAO-TI and IATA-DGR:ICAO/IATA Class: -
Special precautions for user Not applicable.
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixtureSARA (Superfund Amendments and Reauthorization Act)Section 302/304 (extremely hazardous substances):None of the ingredients is listed.
Section 313 Reportable Ingredients (Chemicals present below reporting threshold are exempt):None of the ingredients is listed.SARA Section 312/Tier I & II Hazardard Catagories: Health Delayed (chronic) No Health Immediate (acute) No Flammable No Reactive No Pressure No
National Chemical Inventory StatusTSCA (Toxic Substances Control Act - United States):All ingredients are listed or exempt from listing unless otherwise noted below.
Safety phrases:Do not breathe gas/fumes/vapor/spray.Do not breathe smokeAvoid contact with skin and eyes.Take off immediately all contaminated clothing.Wear suitable gloves.Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
* 16 Other information"The data included herein are presented in accordance with various environment, health and safety regulations. It isthe responsibility of a recipient of the data to remain currently informed on chemical hazard information, to designand update its own program and to comply with all national, federal, state and local laws and regulations applicable tosafety, occupational health, right-to-know and environmental protection."