INTERNA TIONAL COMMERCIAL AND INDUSTRIAL VEHICLE HARDWARE AND TRIM SYSTEMS Hansen Grab & Hand Rail Systems Hansen International grab and hand rail systems exceed the industry’s stringent standards and demands. From Corrosion Resistance Requirements Type III to NFPA 1901 Compliance Standards, our experience in the Fire and Emergency, Utility, Truck and Military markets for nearly 100 years gives us a unique understanding of the demanding nature and environment these vehicles face everyday. We use only the finest materials and robust design to ensure quality and long life. 1-800-850-8070 | www.hansenint.com Since 1920
4
Embed
Premium Grabs and Rails - Hansen International · NFPA 1901 Compliant 1-800-850-8070 ... Premium Grabs and Rails NFPA 1901 Compliant Our new patented knurled grab rails are NFPA1901
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
I N T E R N A T I O N A LCOMMERCIAL AND INDUSTRIAL VEHICLE HARDWARE AND TRIM SYSTEMS
Hansen Grab & Hand Rail Systems
Hansen International grab and hand rail systems exceed the industry’s stringent standards and demands. From Corrosion Resistance Requirements Type III to NFPA 1901 Compliance Standards, our experience in the Fire and Emergency, Utility, Truck and Military markets for nearly 100 years gives us a unique understanding of the demanding nature and environment these vehicles face everyday. We use only the finest materials and robust design to ensure quality and long life.
1-800-850-8070 | www.hansenint.com
Premium Grabs and Rails
NFPA 1901 CompliantOur new patented knurled grab rails are NFPA1901 compliant. Reflective tape and anti-slip resistance are available in unlit and lit versions up to 12ft. in length.
Available Reflective Tape Colors:
Yellow 18Florescent Lime L2Red 12White
Made in America
I
NEW Safetylite® “Lit” Anti Slip Grab HandleHansen’s NEW “Lit” ANTI SLIP Grab Handle is the perfect addition to your vehicle or trailer to increase the safety of the work place. Allows for easy identification of grab handles and illuminates the area for improved safety. The “RIBBED” Anti Slip feature adds hand grip improvement even in wet conditions.
• 300 Lbs. Pull Tested• Salt Spray Tested• IPX-6 Water Resistant• 100 Lumen Per Foot• Back Lit 12V LED Light• Anti Slip — Ribbed• STD Lengths: 14”, 18”, 24”, 30”• 3/4” or 1 1/8”• Molded Foot Gaskets Included
Aluminum Knurled Lit Rail
• 300 Lbs. Pull Tested• Salt Spray Tested• 1 1/4” Anodized Aluminum• 100 Lumen Per Foot• Back Lit 12V LED Light• Anti Slip — Knurled• Custom Lengths Available
Available LED Colors:
RedBlueGreenAmberWhite
Since 1920
Grab 1015
Look for the “H” on our stanchions and you’ll know
they are SC3-- Severe Service Conditions-- and have been
tested to out perform the competition. The “H” assures
you are buying what you ordered — A Hansen Stanchion.
3/4” SS Formed & Knurled Handles GHKN06SSPL-14 14”3/4” SS Formed & Knurled Handles GHKN06SSPL-18 18”3/4” SS Formed & Knurled Handles GHKN06SSPL-24 24”3/4” SS Formed & Knurled Handles GHKN06SSPL-30 30”
1 1/8” SS Formed & Knurled Handles GHKNO9SSPL-18 18”1 1/8” SS Formed & Knurled Handles GHKNO9SSPL-24 24”1 1/8” SS Formed & Knurled Handles GHKNO9SSPL-30 30”
1 1/4” SS Knurled Rail Special Up to 12’
A
B
C
D
E
F
G
E
Patented
Stanchions With Rivet Holes Part# No Rivet Holes Part#
Look for the
Hansen Stanchions
End Stanchion Center Stanchion T-Stanchion Offset Center Stanchion
Patented
Patented
Patented
End Stanchions CR-383036 CR-383036NHOffset End Stanchions RH CR-383045 CR-383045NHOffset End Stanchions LH CR-383046 CR-383046NHCenter Stanchions CR-283021 CR-283021NHOffset Center Stanchions CR-283243 CR-283243NHT Stachions CR-383052 CR-383052NHElbow Stanchions CR-383053 CR-383053NHEnd Stanchions 30° LH (rotates light 30 degrees, Items G and H) CR-383036-30LEnd Stanchions 30° RH (rotates light 30 degrees, Items G and H) CR-383036-30R H
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-14 14”
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-18 18”
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-24 24”
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-30 30” 1 1/8” Alum Lit Formed Anti Slip Grab Handle GHRU09WH12V-18 18” 1 1/8” Alum Lit Formed Anti Slip Grab Handle GHRU09WH12V-24 24” 1 1/8” Alum Lit Formed Anti Slip Grab Handle GHRU09WH12V-30 30”
I
HPatented
Offset End Stanchion Elbow Stanchion
I, JPatent Pending
1 1/8” Alum. Formed Single Rubber Handles GHRU09ALAN-18 18”1 1/8” Alum. Formed Single Rubber Handles GHRU09ALAN-24 24”1 1/8” Alum. Formed Single Rubber Handles GHRU09ALAN-30 30”
3/4” SS Formed & Knurled Handles GHKN06SSPL-14 14”3/4” SS Formed & Knurled Handles GHKN06SSPL-18 18”3/4” SS Formed & Knurled Handles GHKN06SSPL-24 24”3/4” SS Formed & Knurled Handles GHKN06SSPL-30 30”
1 1/8” SS Formed & Knurled Handles GHKNO9SSPL-18 18”1 1/8” SS Formed & Knurled Handles GHKNO9SSPL-24 24”1 1/8” SS Formed & Knurled Handles GHKNO9SSPL-30 30”
1 1/4” SS Knurled Rail Special Up to 12’
A
B
C
D
E
F
G
E
Patented
Stanchions With Rivet Holes Part# No Rivet Holes Part#
Look for the
Hansen Stanchions
End Stanchion Center Stanchion T-Stanchion Offset Center Stanchion
Patented
Patented
Patented
End Stanchions CR-383036 CR-383036NHOffset End Stanchions RH CR-383045 CR-383045NHOffset End Stanchions LH CR-383046 CR-383046NHCenter Stanchions CR-283021 CR-283021NHOffset Center Stanchions CR-283243 CR-283243NHT Stachions CR-383052 CR-383052NHElbow Stanchions CR-383053 CR-383053NHEnd Stanchions 30° LH (rotates light 30 degrees, Items G and H) CR-383036-30LEnd Stanchions 30° RH (rotates light 30 degrees, Items G and H) CR-383036-30R H
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-14 14”
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-18 18”
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-24 24”
3/4” Alum Lit Formed Anti Slip Grab Handle GHRU06WH12V-30 30” 1 1/8” Alum Lit Formed Anti Slip Grab Handle GHRU09WH12V-18 18” 1 1/8” Alum Lit Formed Anti Slip Grab Handle GHRU09WH12V-24 24” 1 1/8” Alum Lit Formed Anti Slip Grab Handle GHRU09WH12V-30 30”
I
HPatented
Offset End Stanchion Elbow Stanchion
I, JPatent Pending
1 1/8” Alum. Formed Single Rubber Handles GHRU09ALAN-18 18”1 1/8” Alum. Formed Single Rubber Handles GHRU09ALAN-24 24”1 1/8” Alum. Formed Single Rubber Handles GHRU09ALAN-30 30”
I N T E R N A T I O N A LCOMMERCIAL AND INDUSTRIAL VEHICLE HARDWARE AND TRIM SYSTEMS
Hansen Grab & Hand Rail Systems
Hansen International grab and hand rail systems exceed the industry’s stringent standards and demands. From Corrosion Resistance Requirements Type III to NFPA 1901 Compliance Standards, our experience in the Fire and Emergency, Utility, Truck and Military markets for nearly 100 years gives us a unique understanding of the demanding nature and environment these vehicles face everyday. We use only the finest materials and robust design to ensure quality and long life.
1-800-850-8070 | www.hansenint.com
Premium Grabs and Rails
NFPA 1901 CompliantOur new patented knurled grab rails are NFPA1901 compliant. Reflective tape and anti-slip resistance are available in unlit and lit versions up to 12ft. in length.
Available Reflective Tape Colors:
Yellow 18Florescent Lime L2Red 12White
Made in America
I
NEW Safetylite® “Lit” Anti Slip Grab HandleHansen’s NEW “Lit” ANTI SLIP Grab Handle is the perfect addition to your vehicle or trailer to increase the safety of the work place. Allows for easy identification of grab handles and illuminates the area for improved safety. The “RIBBED” Anti Slip feature adds hand grip improvement even in wet conditions.
• 300 Lbs. Pull Tested• Salt Spray Tested• IPX-6 Water Resistant• 100 Lumen Per Foot• Back Lit 12V LED Light• Anti Slip — Ribbed• STD Lengths: 14”, 18”, 24”, 30”• 3/4” or 1 1/8”• Molded Foot Gaskets Included
Aluminum Knurled Lit Rail
• 300 Lbs. Pull Tested• Salt Spray Tested• 1 1/4” Anodized Aluminum• 100 Lumen Per Foot• Back Lit 12V LED Light• Anti Slip — Knurled• Custom Lengths Available