premier Coatings East PP

Its more than just paint…

Pressure Washer (1) 20’ x 30’, green rated, water recycling wash booth

Shot Blast (1) 30’ x 20’ x 12’ Wheelabrator blast booth (1) 15’ x 10’ x 10’ Wheelabrator blast booth (1) 15’ x 12’ x 12’ Wheelabrator blast booth

Fully Automated Small Parts Paint Line (1) 714’ overhead conveyor system, 1600lb. capacity (1) 20’ x 12’ steam cleaning station (1) 20’ x 12’ Empire blast booth (2) 12’ paint booth(1) 50’ x 60’ cure oven

Paint Booths (1) Global Solutions 44’ x 20’ x 16’ booth (1) Global Solutions 30’ x 20’ x 12’ booth (2) Global Solutions 25’ x 12’ x 12’ booth

Ovens (1) 30’ x 20’ x 14’ oven (1) 30’ x 20’ x 12’ oven

Quality Drives Everything We Do. We make our number one

priority to deliver quality product no matter how high or low the order quantity. It’s not just the quality assurance (QA) process checks, or the way we protect our parts in the delivery shipping process, It’s everything! It’s the care our team gives in providing an outstanding job. It’s the way we integrate blasting, priming, and top coat application for an ultra-durable finish. In fact, Premier’s processes are set up with quality assurance entrenched in every step.

100% Traceability: All parts processed at Premier Coatings are inspected and

documented on a QA router that travels with the process router and print. Coupons are also processed with each production run with adhesion tests and solvent tests. Once a month, coupons are sent for salt spray testing. This is documented and stored for retrieval should any quality questions arise.

INNOVATION: Premier Coatings East, specializes in CARC paint as well as commercial grade

epoxies. Our expertise, incorporated with the latest technology, has propelled PCE to the forefront of our field in a very short time. When selecting a paint company for military and industrial components, PCE satiates the requirements. Our capacity for handling large parts on our batch side (Trucks/Capsules) to our fully-automated small parts line (Parts up to 48 X 60, 800 lbs.) has been evaluated and certified by some of the leading OEM’s in

the military/commercial industry.

Batch Side:

• Paint Booth – 44 ft. long by 20 ft. wide and 16 ft. high • Paint Booth – 30 ft. long by 20 ft. wide and 12 ft. high • Two Paint Booths 20 ft. long by 12 ft. wide and 12 ft. high. • Oven – 30 ft. long by 20 ft. wide and 14 ft. high • Oven – 30 ft. long by 20 ft. wide and 12 ft. high • Blast Booth – Wheelabrator full recovery floor, 30 ft. long by 20 ft. wide and 12 ft. high • Blast Booth – Empire, 25 ft. long by 15 ft. wide and 9 ft. high • Pressure Wash Station – 30 ft. long by 20 ft. wide, 250 degrees/2500 PSI heat and pressure, fully

reclaimable.

Small Parts line: • Steam cleaning, blasting, prime & topcoat booths, force-dry (oven) and the capacity to handle up

to 1600 lb. – 4 ft. by 6 ft. parts.

Our Small Parts Line Isn’t That Small …..

can handle 12 inch x 12 inch and handle a whole line of parts up

to 6 feet by 4 feet in length, each weighing up to 1600 lbs. From beginning to end, its unique design was driven by Lean Manufacturing concepts: It consists of two individual lines – one for prep and one for painting. It incorporates a large cue/parts prep area with steam cleaning and blasting capability.

can travel up to 14 feet per minute with an average speed of 4 feet per minute to include: 20 minutes of flash time in the primer booth. 30 minutes of forced-dry oven time. 20 minutes of cool down time. 20 minutes of flash time in the topcoat booth. Another 30 minutes in the forced dry oven. A final cool down time and unload area.

We use Cross Cut Adhesion Testing to insure adhesion has taken place.

ISO2409:2007 Describes this test method for assessing the resistance of

paint coatings to separation from substrates when a right-angle lattice

pattern is cut into the coating, penetrating through to the substrate.

IG-320 Gloss Checker

The IG-320 provides a measured value to confirm visual observations

reducing human error.

The meter is laid on the surface to display the gloss value instantaneously.

IG-320 Averages up to 99 data points for gloss.

IG-320 is very accurate with a + or – 0.5% reproducibility capability at full

scale.

Elecometer 224 • Measurement Capability to + or – 0.5%.

• Conforms to National & International Standards.

• Temperature Stable Measurements.

• Statistics are Calculated and displayed in real time.

• Live and Batch Readings Graph Format for Instant analysis.

• Efficient and Accurate

• Fast Reading Rate of 60+ per minute

• Intergral and separate probe options to suit any need